Loading...
1/*
2 * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&board_ifc {
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
40 reg = <0x0 0x0 0x2000000>;
41 bank-width = <2>;
42 device-width = <1>;
43
44 partition@40000 {
45 /* 256KB for DTB Image */
46 reg = <0x00040000 0x00040000>;
47 label = "NOR DTB Image";
48 };
49
50 partition@80000 {
51 /* 7 MB for Linux Kernel Image */
52 reg = <0x00080000 0x00700000>;
53 label = "NOR Linux Kernel Image";
54 };
55
56 partition@800000 {
57 /* 20MB for JFFS2 based Root file System */
58 reg = <0x00800000 0x01400000>;
59 label = "NOR JFFS2 Root File System";
60 };
61
62 partition@1f00000 {
63 /* This location must not be altered */
64 /* 512KB for u-boot Bootloader Image */
65 /* 512KB for u-boot Environment Variables */
66 reg = <0x01f00000 0x00100000>;
67 label = "NOR U-Boot Image";
68 read-only;
69 };
70 };
71
72 ifc_nand: nand@1,0 {
73 #address-cells = <1>;
74 #size-cells = <1>;
75 compatible = "fsl,ifc-nand";
76 reg = <0x1 0x0 0x10000>;
77 };
78
79 cpld@3,0 {
80 #address-cells = <1>;
81 #size-cells = <1>;
82 compatible = "fsl,p1010rdb-cpld";
83 reg = <0x3 0x0 0x0000020>;
84 bank-width = <1>;
85 device-width = <1>;
86 };
87};
88
89&board_soc {
90 i2c@3000 {
91 eeprom@50 {
92 compatible = "st,24c256", "atmel,24c256";
93 reg = <0x50>;
94 };
95
96 rtc@68 {
97 compatible = "pericom,pt7c4338";
98 reg = <0x68>;
99 };
100 };
101
102 i2c@3100 {
103 eeprom@52 {
104 compatible = "atmel,24c01";
105 reg = <0x52>;
106 };
107 };
108
109 spi@7000 {
110 flash@0 {
111 #address-cells = <1>;
112 #size-cells = <1>;
113 compatible = "spansion,s25sl12801", "jedec,spi-nor";
114 reg = <0>;
115 spi-max-frequency = <40000000>;
116
117 partition@0 {
118 /* 1MB for u-boot Bootloader Image */
119 /* 1MB for Environment */
120 reg = <0x0 0x00100000>;
121 label = "SPI Flash U-Boot Image";
122 read-only;
123 };
124
125 partition@100000 {
126 /* 512KB for DTB Image */
127 reg = <0x00100000 0x00080000>;
128 label = "SPI Flash DTB Image";
129 };
130
131 partition@180000 {
132 /* 4MB for Linux Kernel Image */
133 reg = <0x00180000 0x00400000>;
134 label = "SPI Flash Linux Kernel Image";
135 };
136
137 partition@580000 {
138 /* 4MB for Compressed RFS Image */
139 reg = <0x00580000 0x00400000>;
140 label = "SPI Flash Compressed RFSImage";
141 };
142
143 partition@980000 {
144 /* 6.5MB for JFFS2 based RFS */
145 reg = <0x00980000 0x00680000>;
146 label = "SPI Flash JFFS2 RFS";
147 };
148 };
149 };
150
151 usb@22000 {
152 phy_type = "utmi";
153 dr_mode = "host";
154 };
155
156 mdio@24000 {
157 phy0: ethernet-phy@0 {
158 reg = <0x1>;
159 };
160
161 phy1: ethernet-phy@1 {
162 reg = <0x0>;
163 };
164
165 phy2: ethernet-phy@2 {
166 reg = <0x2>;
167 };
168
169 tbi-phy@3 {
170 device_type = "tbi-phy";
171 reg = <0x3>;
172 };
173 };
174
175 mdio@25000 {
176 tbi0: tbi-phy@11 {
177 reg = <0x11>;
178 device_type = "tbi-phy";
179 };
180 };
181
182 mdio@26000 {
183 tbi1: tbi-phy@11 {
184 reg = <0x11>;
185 device_type = "tbi-phy";
186 };
187 };
188
189 ptp_clock@b0e00 {
190 compatible = "fsl,etsec-ptp";
191 reg = <0xb0e00 0xb0>;
192 interrupts = <68 2 0 0 69 2 0 0>;
193 fsl,tclk-period = <10>;
194 fsl,tmr-prsc = <2>;
195 fsl,tmr-add = <0x80000016>;
196 fsl,tmr-fiper1 = <999999990>;
197 fsl,tmr-fiper2 = <99990>;
198 fsl,max-adj = <199999999>;
199 };
200
201 enet0: ethernet@b0000 {
202 phy-handle = <&phy0>;
203 phy-connection-type = "rgmii-id";
204 };
205
206 enet1: ethernet@b1000 {
207 phy-handle = <&phy1>;
208 tbi-handle = <&tbi0>;
209 phy-connection-type = "sgmii";
210 };
211
212 enet2: ethernet@b2000 {
213 phy-handle = <&phy2>;
214 tbi-handle = <&tbi1>;
215 phy-connection-type = "sgmii";
216 };
217};
218
219&pci0 {
220 pcie@0 {
221 interrupt-map = <
222 /* IDSEL 0x0 */
223 /*
224 *irq[4:5] are active-high
225 *irq[6:7] are active-low
226 */
227 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
228 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
229 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
230 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
231 >;
232 };
233};
1/*
2 * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&board_ifc {
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
40 reg = <0x0 0x0 0x2000000>;
41 bank-width = <2>;
42 device-width = <1>;
43
44 partition@40000 {
45 /* 256KB for DTB Image */
46 reg = <0x00040000 0x00040000>;
47 label = "NOR DTB Image";
48 };
49
50 partition@80000 {
51 /* 7 MB for Linux Kernel Image */
52 reg = <0x00080000 0x00700000>;
53 label = "NOR Linux Kernel Image";
54 };
55
56 partition@800000 {
57 /* 20MB for JFFS2 based Root file System */
58 reg = <0x00800000 0x01400000>;
59 label = "NOR JFFS2 Root File System";
60 };
61
62 partition@1f00000 {
63 /* This location must not be altered */
64 /* 512KB for u-boot Bootloader Image */
65 /* 512KB for u-boot Environment Variables */
66 reg = <0x01f00000 0x00100000>;
67 label = "NOR U-Boot Image";
68 read-only;
69 };
70 };
71
72 ifc_nand: nand@1,0 {
73 #address-cells = <1>;
74 #size-cells = <1>;
75 compatible = "fsl,ifc-nand";
76 reg = <0x1 0x0 0x10000>;
77 };
78
79 cpld@3,0 {
80 #address-cells = <1>;
81 #size-cells = <1>;
82 compatible = "fsl,p1010rdb-cpld";
83 reg = <0x3 0x0 0x0000020>;
84 bank-width = <1>;
85 device-width = <1>;
86 };
87};
88
89&board_soc {
90 i2c@3000 {
91 eeprom@50 {
92 compatible = "st,24c256", "atmel,24c256";
93 reg = <0x50>;
94 };
95
96 rtc@68 {
97 compatible = "pericom,pt7c4338";
98 reg = <0x68>;
99 };
100 };
101
102 i2c@3100 {
103 eeprom@52 {
104 compatible = "atmel,24c01";
105 reg = <0x52>;
106 };
107 };
108
109 spi@7000 {
110 flash@0 {
111 #address-cells = <1>;
112 #size-cells = <1>;
113 compatible = "spansion,s25sl12801", "jedec,spi-nor";
114 reg = <0>;
115 spi-max-frequency = <40000000>;
116
117 partition@0 {
118 /* 1MB for u-boot Bootloader Image */
119 /* 1MB for Environment */
120 reg = <0x0 0x00100000>;
121 label = "SPI Flash U-Boot Image";
122 read-only;
123 };
124
125 partition@100000 {
126 /* 512KB for DTB Image */
127 reg = <0x00100000 0x00080000>;
128 label = "SPI Flash DTB Image";
129 };
130
131 partition@180000 {
132 /* 4MB for Linux Kernel Image */
133 reg = <0x00180000 0x00400000>;
134 label = "SPI Flash Linux Kernel Image";
135 };
136
137 partition@580000 {
138 /* 4MB for Compressed RFS Image */
139 reg = <0x00580000 0x00400000>;
140 label = "SPI Flash Compressed RFSImage";
141 };
142
143 partition@980000 {
144 /* 6.5MB for JFFS2 based RFS */
145 reg = <0x00980000 0x00680000>;
146 label = "SPI Flash JFFS2 RFS";
147 };
148 };
149 };
150
151 usb@22000 {
152 phy_type = "utmi";
153 dr_mode = "host";
154 };
155
156 mdio@24000 {
157 phy0: ethernet-phy@0 {
158 reg = <0x1>;
159 };
160
161 phy1: ethernet-phy@1 {
162 reg = <0x0>;
163 };
164
165 phy2: ethernet-phy@2 {
166 reg = <0x2>;
167 };
168
169 tbi-phy@3 {
170 device_type = "tbi-phy";
171 reg = <0x3>;
172 };
173 };
174
175 mdio@25000 {
176 tbi0: tbi-phy@11 {
177 reg = <0x11>;
178 device_type = "tbi-phy";
179 };
180 };
181
182 mdio@26000 {
183 tbi1: tbi-phy@11 {
184 reg = <0x11>;
185 device_type = "tbi-phy";
186 };
187 };
188
189 ptp_clock@b0e00 {
190 compatible = "fsl,etsec-ptp";
191 reg = <0xb0e00 0xb0>;
192 interrupts = <68 2 0 0 69 2 0 0>;
193 fsl,tclk-period = <10>;
194 fsl,tmr-prsc = <2>;
195 fsl,tmr-add = <0x80000016>;
196 fsl,tmr-fiper1 = <999999990>;
197 fsl,tmr-fiper2 = <99990>;
198 fsl,max-adj = <199999999>;
199 };
200
201 enet0: ethernet@b0000 {
202 phy-handle = <&phy0>;
203 phy-connection-type = "rgmii-id";
204 };
205
206 enet1: ethernet@b1000 {
207 phy-handle = <&phy1>;
208 tbi-handle = <&tbi0>;
209 phy-connection-type = "sgmii";
210 };
211
212 enet2: ethernet@b2000 {
213 phy-handle = <&phy2>;
214 tbi-handle = <&tbi1>;
215 phy-connection-type = "sgmii";
216 };
217};
218
219&pci0 {
220 pcie@0 {
221 interrupt-map = <
222 /* IDSEL 0x0 */
223 /*
224 *irq[4:5] are active-high
225 *irq[6:7] are active-low
226 */
227 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
228 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
229 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
230 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
231 >;
232 };
233};