Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8641 HPCN Device Tree Source
4 *
5 * Copyright 2006 Freescale Semiconductor Inc.
6 */
7
8/include/ "mpc8641si-pre.dtsi"
9
10/ {
11 model = "MPC8641HPCN";
12 compatible = "fsl,mpc8641hpcn";
13
14 memory {
15 device_type = "memory";
16 reg = <0x00000000 0x40000000>; // 1G at 0x0
17 };
18
19 lbc: localbus@ffe05000 {
20 reg = <0xffe05000 0x1000>;
21
22 ranges = <0 0 0xef800000 0x00800000
23 2 0 0xffdf8000 0x00008000
24 3 0 0xffdf0000 0x00008000>;
25
26 flash@0,0 {
27 compatible = "cfi-flash";
28 reg = <0 0 0x00800000>;
29 bank-width = <2>;
30 device-width = <2>;
31 #address-cells = <1>;
32 #size-cells = <1>;
33 partition@0 {
34 label = "kernel";
35 reg = <0x00000000 0x00300000>;
36 };
37 partition@300000 {
38 label = "firmware b";
39 reg = <0x00300000 0x00100000>;
40 read-only;
41 };
42 partition@400000 {
43 label = "fs";
44 reg = <0x00400000 0x00300000>;
45 };
46 partition@700000 {
47 label = "firmware a";
48 reg = <0x00700000 0x00100000>;
49 read-only;
50 };
51 };
52 };
53
54 soc: soc8641@ffe00000 {
55 ranges = <0x00000000 0xffe00000 0x00100000>;
56
57 enet0: ethernet@24000 {
58 tbi-handle = <&tbi0>;
59 phy-handle = <&phy0>;
60 phy-connection-type = "rgmii-id";
61 };
62
63 mdio@24520 {
64 phy0: ethernet-phy@0 {
65 interrupts = <10 1 0 0>;
66 reg = <0>;
67 };
68 phy1: ethernet-phy@1 {
69 interrupts = <10 1 0 0>;
70 reg = <1>;
71 };
72 phy2: ethernet-phy@2 {
73 interrupts = <10 1 0 0>;
74 reg = <2>;
75 };
76 phy3: ethernet-phy@3 {
77 interrupts = <10 1 0 0>;
78 reg = <3>;
79 };
80 tbi0: tbi-phy@11 {
81 reg = <0x11>;
82 device_type = "tbi-phy";
83 };
84 };
85
86 enet1: ethernet@25000 {
87 tbi-handle = <&tbi1>;
88 phy-handle = <&phy1>;
89 phy-connection-type = "rgmii-id";
90 };
91
92 mdio@25520 {
93 tbi1: tbi-phy@11 {
94 reg = <0x11>;
95 device_type = "tbi-phy";
96 };
97 };
98
99 enet2: ethernet@26000 {
100 tbi-handle = <&tbi2>;
101 phy-handle = <&phy2>;
102 phy-connection-type = "rgmii-id";
103 };
104
105 mdio@26520 {
106 tbi2: tbi-phy@11 {
107 reg = <0x11>;
108 device_type = "tbi-phy";
109 };
110 };
111
112 enet3: ethernet@27000 {
113 tbi-handle = <&tbi3>;
114 phy-handle = <&phy3>;
115 phy-connection-type = "rgmii-id";
116 };
117
118 mdio@27520 {
119 tbi3: tbi-phy@11 {
120 reg = <0x11>;
121 device_type = "tbi-phy";
122 };
123 };
124
125 rmu: rmu@d3000 {
126 #address-cells = <1>;
127 #size-cells = <1>;
128 compatible = "fsl,srio-rmu";
129 reg = <0xd3000 0x500>;
130 ranges = <0x0 0xd3000 0x500>;
131
132 message-unit@0 {
133 compatible = "fsl,srio-msg-unit";
134 reg = <0x0 0x100>;
135 interrupts = <
136 53 2 0 0 /* msg1_tx_irq */
137 54 2 0 0>;/* msg1_rx_irq */
138 };
139 message-unit@100 {
140 compatible = "fsl,srio-msg-unit";
141 reg = <0x100 0x100>;
142 interrupts = <
143 55 2 0 0 /* msg2_tx_irq */
144 56 2 0 0>;/* msg2_rx_irq */
145 };
146 doorbell-unit@400 {
147 compatible = "fsl,srio-dbell-unit";
148 reg = <0x400 0x80>;
149 interrupts = <
150 49 2 0 0 /* bell_outb_irq */
151 50 2 0 0>;/* bell_inb_irq */
152 };
153 port-write-unit@4e0 {
154 compatible = "fsl,srio-port-write-unit";
155 reg = <0x4e0 0x20>;
156 interrupts = <48 2 0 0>;
157 };
158 };
159 };
160
161 pci0: pcie@ffe08000 {
162 reg = <0xffe08000 0x1000>;
163 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
164 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
165 interrupt-map-mask = <0xff00 0 0 7>;
166 interrupt-map = <
167 /* IDSEL 0x11 func 0 - PCI slot 1 */
168 0x8800 0 0 1 &mpic 2 1 0 0
169 0x8800 0 0 2 &mpic 3 1 0 0
170 0x8800 0 0 3 &mpic 4 1 0 0
171 0x8800 0 0 4 &mpic 1 1 0 0
172
173 /* IDSEL 0x11 func 1 - PCI slot 1 */
174 0x8900 0 0 1 &mpic 2 1 0 0
175 0x8900 0 0 2 &mpic 3 1 0 0
176 0x8900 0 0 3 &mpic 4 1 0 0
177 0x8900 0 0 4 &mpic 1 1 0 0
178
179 /* IDSEL 0x11 func 2 - PCI slot 1 */
180 0x8a00 0 0 1 &mpic 2 1 0 0
181 0x8a00 0 0 2 &mpic 3 1 0 0
182 0x8a00 0 0 3 &mpic 4 1 0 0
183 0x8a00 0 0 4 &mpic 1 1 0 0
184
185 /* IDSEL 0x11 func 3 - PCI slot 1 */
186 0x8b00 0 0 1 &mpic 2 1 0 0
187 0x8b00 0 0 2 &mpic 3 1 0 0
188 0x8b00 0 0 3 &mpic 4 1 0 0
189 0x8b00 0 0 4 &mpic 1 1 0 0
190
191 /* IDSEL 0x11 func 4 - PCI slot 1 */
192 0x8c00 0 0 1 &mpic 2 1 0 0
193 0x8c00 0 0 2 &mpic 3 1 0 0
194 0x8c00 0 0 3 &mpic 4 1 0 0
195 0x8c00 0 0 4 &mpic 1 1 0 0
196
197 /* IDSEL 0x11 func 5 - PCI slot 1 */
198 0x8d00 0 0 1 &mpic 2 1 0 0
199 0x8d00 0 0 2 &mpic 3 1 0 0
200 0x8d00 0 0 3 &mpic 4 1 0 0
201 0x8d00 0 0 4 &mpic 1 1 0 0
202
203 /* IDSEL 0x11 func 6 - PCI slot 1 */
204 0x8e00 0 0 1 &mpic 2 1 0 0
205 0x8e00 0 0 2 &mpic 3 1 0 0
206 0x8e00 0 0 3 &mpic 4 1 0 0
207 0x8e00 0 0 4 &mpic 1 1 0 0
208
209 /* IDSEL 0x11 func 7 - PCI slot 1 */
210 0x8f00 0 0 1 &mpic 2 1 0 0
211 0x8f00 0 0 2 &mpic 3 1 0 0
212 0x8f00 0 0 3 &mpic 4 1 0 0
213 0x8f00 0 0 4 &mpic 1 1 0 0
214
215 /* IDSEL 0x12 func 0 - PCI slot 2 */
216 0x9000 0 0 1 &mpic 3 1 0 0
217 0x9000 0 0 2 &mpic 4 1 0 0
218 0x9000 0 0 3 &mpic 1 1 0 0
219 0x9000 0 0 4 &mpic 2 1 0 0
220
221 /* IDSEL 0x12 func 1 - PCI slot 2 */
222 0x9100 0 0 1 &mpic 3 1 0 0
223 0x9100 0 0 2 &mpic 4 1 0 0
224 0x9100 0 0 3 &mpic 1 1 0 0
225 0x9100 0 0 4 &mpic 2 1 0 0
226
227 /* IDSEL 0x12 func 2 - PCI slot 2 */
228 0x9200 0 0 1 &mpic 3 1 0 0
229 0x9200 0 0 2 &mpic 4 1 0 0
230 0x9200 0 0 3 &mpic 1 1 0 0
231 0x9200 0 0 4 &mpic 2 1 0 0
232
233 /* IDSEL 0x12 func 3 - PCI slot 2 */
234 0x9300 0 0 1 &mpic 3 1 0 0
235 0x9300 0 0 2 &mpic 4 1 0 0
236 0x9300 0 0 3 &mpic 1 1 0 0
237 0x9300 0 0 4 &mpic 2 1 0 0
238
239 /* IDSEL 0x12 func 4 - PCI slot 2 */
240 0x9400 0 0 1 &mpic 3 1 0 0
241 0x9400 0 0 2 &mpic 4 1 0 0
242 0x9400 0 0 3 &mpic 1 1 0 0
243 0x9400 0 0 4 &mpic 2 1 0 0
244
245 /* IDSEL 0x12 func 5 - PCI slot 2 */
246 0x9500 0 0 1 &mpic 3 1 0 0
247 0x9500 0 0 2 &mpic 4 1 0 0
248 0x9500 0 0 3 &mpic 1 1 0 0
249 0x9500 0 0 4 &mpic 2 1 0 0
250
251 /* IDSEL 0x12 func 6 - PCI slot 2 */
252 0x9600 0 0 1 &mpic 3 1 0 0
253 0x9600 0 0 2 &mpic 4 1 0 0
254 0x9600 0 0 3 &mpic 1 1 0 0
255 0x9600 0 0 4 &mpic 2 1 0 0
256
257 /* IDSEL 0x12 func 7 - PCI slot 2 */
258 0x9700 0 0 1 &mpic 3 1 0 0
259 0x9700 0 0 2 &mpic 4 1 0 0
260 0x9700 0 0 3 &mpic 1 1 0 0
261 0x9700 0 0 4 &mpic 2 1 0 0
262
263 // IDSEL 0x1c USB
264 0xe000 0 0 1 &i8259 12 2
265 0xe100 0 0 2 &i8259 9 2
266 0xe200 0 0 3 &i8259 10 2
267 0xe300 0 0 4 &i8259 11 2
268
269 // IDSEL 0x1d Audio
270 0xe800 0 0 1 &i8259 6 2
271
272 // IDSEL 0x1e Legacy
273 0xf000 0 0 1 &i8259 7 2
274 0xf100 0 0 1 &i8259 7 2
275
276 // IDSEL 0x1f IDE/SATA
277 0xf800 0 0 1 &i8259 14 2
278 0xf900 0 0 1 &i8259 5 2
279 >;
280
281 pcie@0 {
282 ranges = <0x02000000 0x0 0x80000000
283 0x02000000 0x0 0x80000000
284 0x0 0x20000000
285
286 0x01000000 0x0 0x00000000
287 0x01000000 0x0 0x00000000
288 0x0 0x00010000>;
289 uli1575@0 {
290 reg = <0 0 0 0 0>;
291 #size-cells = <2>;
292 #address-cells = <3>;
293 ranges = <0x02000000 0x0 0x80000000
294 0x02000000 0x0 0x80000000
295 0x0 0x20000000
296 0x01000000 0x0 0x00000000
297 0x01000000 0x0 0x00000000
298 0x0 0x00010000>;
299 isa@1e {
300 device_type = "isa";
301 #size-cells = <1>;
302 #address-cells = <2>;
303 reg = <0xf000 0 0 0 0>;
304 ranges = <1 0 0x01000000 0 0
305 0x00001000>;
306 interrupt-parent = <&i8259>;
307
308 i8259: interrupt-controller@20 {
309 reg = <1 0x20 2
310 1 0xa0 2
311 1 0x4d0 2>;
312 interrupt-controller;
313 device_type = "interrupt-controller";
314 #address-cells = <0>;
315 #interrupt-cells = <2>;
316 compatible = "chrp,iic";
317 interrupts = <9 2 0 0>;
318 };
319
320 i8042@60 {
321 #size-cells = <0>;
322 #address-cells = <1>;
323 reg = <1 0x60 1 1 0x64 1>;
324 interrupts = <1 3 12 3>;
325 interrupt-parent = <&i8259>;
326
327 keyboard@0 {
328 reg = <0>;
329 compatible = "pnpPNP,303";
330 };
331
332 mouse@1 {
333 reg = <1>;
334 compatible = "pnpPNP,f03";
335 };
336 };
337
338 rtc@70 {
339 compatible =
340 "pnpPNP,b00";
341 reg = <1 0x70 2>;
342 };
343
344 gpio@400 {
345 reg = <1 0x400 0x80>;
346 };
347 };
348 };
349 };
350
351 };
352
353 pci1: pcie@ffe09000 {
354 reg = <0xffe09000 0x1000>;
355 ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
356 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
357
358 pcie@0 {
359 ranges = <0x02000000 0x0 0xa0000000
360 0x02000000 0x0 0xa0000000
361 0x0 0x20000000
362
363 0x01000000 0x0 0x00000000
364 0x01000000 0x0 0x00000000
365 0x0 0x00010000>;
366 };
367 };
368/*
369 * Only one of Rapid IO or PCI can be present due to HW limitations and
370 * due to the fact that the 2 now share address space in the new memory
371 * map. The most likely case is that we have PCI, so comment out the
372 * rapidio node. Leave it here for reference.
373
374 rapidio@ffec0000 {
375 reg = <0xffec0000 0x11000>;
376 compatible = "fsl,srio";
377 interrupts = <48 2 0 0>;
378 #address-cells = <2>;
379 #size-cells = <2>;
380 fsl,srio-rmu-handle = <&rmu>;
381 ranges;
382
383 port1 {
384 #address-cells = <2>;
385 #size-cells = <2>;
386 cell-index = <1>;
387 ranges = <0 0 0x80000000 0 0x20000000>;
388 };
389 };
390*/
391
392};
393
394/include/ "mpc8641si-post.dtsi"
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8641 HPCN Device Tree Source
4 *
5 * Copyright 2006 Freescale Semiconductor Inc.
6 */
7
8/include/ "mpc8641si-pre.dtsi"
9
10/ {
11 model = "MPC8641HPCN";
12 compatible = "fsl,mpc8641hpcn";
13
14 memory {
15 device_type = "memory";
16 reg = <0x00000000 0x40000000>; // 1G at 0x0
17 };
18
19 lbc: localbus@ffe05000 {
20 reg = <0xffe05000 0x1000>;
21
22 ranges = <0 0 0xef800000 0x00800000
23 2 0 0xffdf8000 0x00008000
24 3 0 0xffdf0000 0x00008000>;
25
26 flash@0,0 {
27 compatible = "cfi-flash";
28 reg = <0 0 0x00800000>;
29 bank-width = <2>;
30 device-width = <2>;
31 #address-cells = <1>;
32 #size-cells = <1>;
33 partition@0 {
34 label = "kernel";
35 reg = <0x00000000 0x00300000>;
36 };
37 partition@300000 {
38 label = "firmware b";
39 reg = <0x00300000 0x00100000>;
40 read-only;
41 };
42 partition@400000 {
43 label = "fs";
44 reg = <0x00400000 0x00300000>;
45 };
46 partition@700000 {
47 label = "firmware a";
48 reg = <0x00700000 0x00100000>;
49 read-only;
50 };
51 };
52 };
53
54 soc: soc8641@ffe00000 {
55 ranges = <0x00000000 0xffe00000 0x00100000>;
56
57 enet0: ethernet@24000 {
58 tbi-handle = <&tbi0>;
59 phy-handle = <&phy0>;
60 phy-connection-type = "rgmii-id";
61 };
62
63 mdio@24520 {
64 phy0: ethernet-phy@0 {
65 interrupts = <10 1 0 0>;
66 reg = <0>;
67 };
68 phy1: ethernet-phy@1 {
69 interrupts = <10 1 0 0>;
70 reg = <1>;
71 };
72 phy2: ethernet-phy@2 {
73 interrupts = <10 1 0 0>;
74 reg = <2>;
75 };
76 phy3: ethernet-phy@3 {
77 interrupts = <10 1 0 0>;
78 reg = <3>;
79 };
80 tbi0: tbi-phy@11 {
81 reg = <0x11>;
82 device_type = "tbi-phy";
83 };
84 };
85
86 enet1: ethernet@25000 {
87 tbi-handle = <&tbi1>;
88 phy-handle = <&phy1>;
89 phy-connection-type = "rgmii-id";
90 };
91
92 mdio@25520 {
93 tbi1: tbi-phy@11 {
94 reg = <0x11>;
95 device_type = "tbi-phy";
96 };
97 };
98
99 enet2: ethernet@26000 {
100 tbi-handle = <&tbi2>;
101 phy-handle = <&phy2>;
102 phy-connection-type = "rgmii-id";
103 };
104
105 mdio@26520 {
106 tbi2: tbi-phy@11 {
107 reg = <0x11>;
108 device_type = "tbi-phy";
109 };
110 };
111
112 enet3: ethernet@27000 {
113 tbi-handle = <&tbi3>;
114 phy-handle = <&phy3>;
115 phy-connection-type = "rgmii-id";
116 };
117
118 mdio@27520 {
119 tbi3: tbi-phy@11 {
120 reg = <0x11>;
121 device_type = "tbi-phy";
122 };
123 };
124
125 rmu: rmu@d3000 {
126 #address-cells = <1>;
127 #size-cells = <1>;
128 compatible = "fsl,srio-rmu";
129 reg = <0xd3000 0x500>;
130 ranges = <0x0 0xd3000 0x500>;
131
132 message-unit@0 {
133 compatible = "fsl,srio-msg-unit";
134 reg = <0x0 0x100>;
135 interrupts = <
136 53 2 0 0 /* msg1_tx_irq */
137 54 2 0 0>;/* msg1_rx_irq */
138 };
139 message-unit@100 {
140 compatible = "fsl,srio-msg-unit";
141 reg = <0x100 0x100>;
142 interrupts = <
143 55 2 0 0 /* msg2_tx_irq */
144 56 2 0 0>;/* msg2_rx_irq */
145 };
146 doorbell-unit@400 {
147 compatible = "fsl,srio-dbell-unit";
148 reg = <0x400 0x80>;
149 interrupts = <
150 49 2 0 0 /* bell_outb_irq */
151 50 2 0 0>;/* bell_inb_irq */
152 };
153 port-write-unit@4e0 {
154 compatible = "fsl,srio-port-write-unit";
155 reg = <0x4e0 0x20>;
156 interrupts = <48 2 0 0>;
157 };
158 };
159 };
160
161 pci0: pcie@ffe08000 {
162 reg = <0xffe08000 0x1000>;
163 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
164 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
165 interrupt-map-mask = <0xff00 0 0 7>;
166 interrupt-map = <
167 /* IDSEL 0x11 func 0 - PCI slot 1 */
168 0x8800 0 0 1 &mpic 2 1 0 0
169 0x8800 0 0 2 &mpic 3 1 0 0
170 0x8800 0 0 3 &mpic 4 1 0 0
171 0x8800 0 0 4 &mpic 1 1 0 0
172
173 /* IDSEL 0x11 func 1 - PCI slot 1 */
174 0x8900 0 0 1 &mpic 2 1 0 0
175 0x8900 0 0 2 &mpic 3 1 0 0
176 0x8900 0 0 3 &mpic 4 1 0 0
177 0x8900 0 0 4 &mpic 1 1 0 0
178
179 /* IDSEL 0x11 func 2 - PCI slot 1 */
180 0x8a00 0 0 1 &mpic 2 1 0 0
181 0x8a00 0 0 2 &mpic 3 1 0 0
182 0x8a00 0 0 3 &mpic 4 1 0 0
183 0x8a00 0 0 4 &mpic 1 1 0 0
184
185 /* IDSEL 0x11 func 3 - PCI slot 1 */
186 0x8b00 0 0 1 &mpic 2 1 0 0
187 0x8b00 0 0 2 &mpic 3 1 0 0
188 0x8b00 0 0 3 &mpic 4 1 0 0
189 0x8b00 0 0 4 &mpic 1 1 0 0
190
191 /* IDSEL 0x11 func 4 - PCI slot 1 */
192 0x8c00 0 0 1 &mpic 2 1 0 0
193 0x8c00 0 0 2 &mpic 3 1 0 0
194 0x8c00 0 0 3 &mpic 4 1 0 0
195 0x8c00 0 0 4 &mpic 1 1 0 0
196
197 /* IDSEL 0x11 func 5 - PCI slot 1 */
198 0x8d00 0 0 1 &mpic 2 1 0 0
199 0x8d00 0 0 2 &mpic 3 1 0 0
200 0x8d00 0 0 3 &mpic 4 1 0 0
201 0x8d00 0 0 4 &mpic 1 1 0 0
202
203 /* IDSEL 0x11 func 6 - PCI slot 1 */
204 0x8e00 0 0 1 &mpic 2 1 0 0
205 0x8e00 0 0 2 &mpic 3 1 0 0
206 0x8e00 0 0 3 &mpic 4 1 0 0
207 0x8e00 0 0 4 &mpic 1 1 0 0
208
209 /* IDSEL 0x11 func 7 - PCI slot 1 */
210 0x8f00 0 0 1 &mpic 2 1 0 0
211 0x8f00 0 0 2 &mpic 3 1 0 0
212 0x8f00 0 0 3 &mpic 4 1 0 0
213 0x8f00 0 0 4 &mpic 1 1 0 0
214
215 /* IDSEL 0x12 func 0 - PCI slot 2 */
216 0x9000 0 0 1 &mpic 3 1 0 0
217 0x9000 0 0 2 &mpic 4 1 0 0
218 0x9000 0 0 3 &mpic 1 1 0 0
219 0x9000 0 0 4 &mpic 2 1 0 0
220
221 /* IDSEL 0x12 func 1 - PCI slot 2 */
222 0x9100 0 0 1 &mpic 3 1 0 0
223 0x9100 0 0 2 &mpic 4 1 0 0
224 0x9100 0 0 3 &mpic 1 1 0 0
225 0x9100 0 0 4 &mpic 2 1 0 0
226
227 /* IDSEL 0x12 func 2 - PCI slot 2 */
228 0x9200 0 0 1 &mpic 3 1 0 0
229 0x9200 0 0 2 &mpic 4 1 0 0
230 0x9200 0 0 3 &mpic 1 1 0 0
231 0x9200 0 0 4 &mpic 2 1 0 0
232
233 /* IDSEL 0x12 func 3 - PCI slot 2 */
234 0x9300 0 0 1 &mpic 3 1 0 0
235 0x9300 0 0 2 &mpic 4 1 0 0
236 0x9300 0 0 3 &mpic 1 1 0 0
237 0x9300 0 0 4 &mpic 2 1 0 0
238
239 /* IDSEL 0x12 func 4 - PCI slot 2 */
240 0x9400 0 0 1 &mpic 3 1 0 0
241 0x9400 0 0 2 &mpic 4 1 0 0
242 0x9400 0 0 3 &mpic 1 1 0 0
243 0x9400 0 0 4 &mpic 2 1 0 0
244
245 /* IDSEL 0x12 func 5 - PCI slot 2 */
246 0x9500 0 0 1 &mpic 3 1 0 0
247 0x9500 0 0 2 &mpic 4 1 0 0
248 0x9500 0 0 3 &mpic 1 1 0 0
249 0x9500 0 0 4 &mpic 2 1 0 0
250
251 /* IDSEL 0x12 func 6 - PCI slot 2 */
252 0x9600 0 0 1 &mpic 3 1 0 0
253 0x9600 0 0 2 &mpic 4 1 0 0
254 0x9600 0 0 3 &mpic 1 1 0 0
255 0x9600 0 0 4 &mpic 2 1 0 0
256
257 /* IDSEL 0x12 func 7 - PCI slot 2 */
258 0x9700 0 0 1 &mpic 3 1 0 0
259 0x9700 0 0 2 &mpic 4 1 0 0
260 0x9700 0 0 3 &mpic 1 1 0 0
261 0x9700 0 0 4 &mpic 2 1 0 0
262
263 // IDSEL 0x1c USB
264 0xe000 0 0 1 &i8259 12 2
265 0xe100 0 0 2 &i8259 9 2
266 0xe200 0 0 3 &i8259 10 2
267 0xe300 0 0 4 &i8259 11 2
268
269 // IDSEL 0x1d Audio
270 0xe800 0 0 1 &i8259 6 2
271
272 // IDSEL 0x1e Legacy
273 0xf000 0 0 1 &i8259 7 2
274 0xf100 0 0 1 &i8259 7 2
275
276 // IDSEL 0x1f IDE/SATA
277 0xf800 0 0 1 &i8259 14 2
278 0xf900 0 0 1 &i8259 5 2
279 >;
280
281 pcie@0 {
282 ranges = <0x02000000 0x0 0x80000000
283 0x02000000 0x0 0x80000000
284 0x0 0x20000000
285
286 0x01000000 0x0 0x00000000
287 0x01000000 0x0 0x00000000
288 0x0 0x00010000>;
289 uli1575@0 {
290 reg = <0 0 0 0 0>;
291 #size-cells = <2>;
292 #address-cells = <3>;
293 ranges = <0x02000000 0x0 0x80000000
294 0x02000000 0x0 0x80000000
295 0x0 0x20000000
296 0x01000000 0x0 0x00000000
297 0x01000000 0x0 0x00000000
298 0x0 0x00010000>;
299 isa@1e {
300 device_type = "isa";
301 #size-cells = <1>;
302 #address-cells = <2>;
303 reg = <0xf000 0 0 0 0>;
304 ranges = <1 0 0x01000000 0 0
305 0x00001000>;
306 interrupt-parent = <&i8259>;
307
308 i8259: interrupt-controller@20 {
309 reg = <1 0x20 2
310 1 0xa0 2
311 1 0x4d0 2>;
312 interrupt-controller;
313 device_type = "interrupt-controller";
314 #address-cells = <0>;
315 #interrupt-cells = <2>;
316 compatible = "chrp,iic";
317 interrupts = <9 2 0 0>;
318 };
319
320 i8042@60 {
321 #size-cells = <0>;
322 #address-cells = <1>;
323 reg = <1 0x60 1 1 0x64 1>;
324 interrupts = <1 3 12 3>;
325 interrupt-parent = <&i8259>;
326
327 keyboard@0 {
328 reg = <0>;
329 compatible = "pnpPNP,303";
330 };
331
332 mouse@1 {
333 reg = <1>;
334 compatible = "pnpPNP,f03";
335 };
336 };
337
338 rtc@70 {
339 compatible =
340 "pnpPNP,b00";
341 reg = <1 0x70 2>;
342 };
343
344 gpio@400 {
345 reg = <1 0x400 0x80>;
346 };
347 };
348 };
349 };
350
351 };
352
353 pci1: pcie@ffe09000 {
354 reg = <0xffe09000 0x1000>;
355 ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
356 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
357
358 pcie@0 {
359 ranges = <0x02000000 0x0 0xa0000000
360 0x02000000 0x0 0xa0000000
361 0x0 0x20000000
362
363 0x01000000 0x0 0x00000000
364 0x01000000 0x0 0x00000000
365 0x0 0x00010000>;
366 };
367 };
368/*
369 * Only one of Rapid IO or PCI can be present due to HW limitations and
370 * due to the fact that the 2 now share address space in the new memory
371 * map. The most likely case is that we have PCI, so comment out the
372 * rapidio node. Leave it here for reference.
373
374 rapidio@ffec0000 {
375 reg = <0xffec0000 0x11000>;
376 compatible = "fsl,srio";
377 interrupts = <48 2 0 0>;
378 #address-cells = <2>;
379 #size-cells = <2>;
380 fsl,srio-rmu-handle = <&rmu>;
381 ranges;
382
383 port1 {
384 #address-cells = <2>;
385 #size-cells = <2>;
386 cell-index = <1>;
387 ranges = <0 0 0x80000000 0 0x20000000>;
388 };
389 };
390*/
391
392};
393
394/include/ "mpc8641si-post.dtsi"