Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * linux/arch/m68k/mm/memory.c
4 *
5 * Copyright (C) 1995 Hamish Macdonald
6 */
7
8#include <linux/module.h>
9#include <linux/mm.h>
10#include <linux/kernel.h>
11#include <linux/string.h>
12#include <linux/types.h>
13#include <linux/init.h>
14#include <linux/pagemap.h>
15#include <linux/gfp.h>
16
17#include <asm/setup.h>
18#include <asm/page.h>
19#include <asm/traps.h>
20#include <asm/machdep.h>
21
22
23/* invalidate page in both caches */
24static inline void clear040(unsigned long paddr)
25{
26 asm volatile (
27 "nop\n\t"
28 ".chip 68040\n\t"
29 "cinvp %%bc,(%0)\n\t"
30 ".chip 68k"
31 : : "a" (paddr));
32}
33
34/* invalidate page in i-cache */
35static inline void cleari040(unsigned long paddr)
36{
37 asm volatile (
38 "nop\n\t"
39 ".chip 68040\n\t"
40 "cinvp %%ic,(%0)\n\t"
41 ".chip 68k"
42 : : "a" (paddr));
43}
44
45/* push page in both caches */
46/* RZ: cpush %bc DOES invalidate %ic, regardless of DPI */
47static inline void push040(unsigned long paddr)
48{
49 asm volatile (
50 "nop\n\t"
51 ".chip 68040\n\t"
52 "cpushp %%bc,(%0)\n\t"
53 ".chip 68k"
54 : : "a" (paddr));
55}
56
57/* push and invalidate page in both caches, must disable ints
58 * to avoid invalidating valid data */
59static inline void pushcl040(unsigned long paddr)
60{
61 unsigned long flags;
62
63 local_irq_save(flags);
64 push040(paddr);
65 if (CPU_IS_060)
66 clear040(paddr);
67 local_irq_restore(flags);
68}
69
70/*
71 * 040: Hit every page containing an address in the range paddr..paddr+len-1.
72 * (Low order bits of the ea of a CINVP/CPUSHP are "don't care"s).
73 * Hit every page until there is a page or less to go. Hit the next page,
74 * and the one after that if the range hits it.
75 */
76/* ++roman: A little bit more care is required here: The CINVP instruction
77 * invalidates cache entries WITHOUT WRITING DIRTY DATA BACK! So the beginning
78 * and the end of the region must be treated differently if they are not
79 * exactly at the beginning or end of a page boundary. Else, maybe too much
80 * data becomes invalidated and thus lost forever. CPUSHP does what we need:
81 * it invalidates the page after pushing dirty data to memory. (Thanks to Jes
82 * for discovering the problem!)
83 */
84/* ... but on the '060, CPUSH doesn't invalidate (for us, since we have set
85 * the DPI bit in the CACR; would it cause problems with temporarily changing
86 * this?). So we have to push first and then additionally to invalidate.
87 */
88
89
90/*
91 * cache_clear() semantics: Clear any cache entries for the area in question,
92 * without writing back dirty entries first. This is useful if the data will
93 * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
94 * _physical_ address.
95 */
96
97void cache_clear (unsigned long paddr, int len)
98{
99 if (CPU_IS_COLDFIRE) {
100 clear_cf_bcache(0, DCACHE_MAX_ADDR);
101 } else if (CPU_IS_040_OR_060) {
102 int tmp;
103
104 /*
105 * We need special treatment for the first page, in case it
106 * is not page-aligned. Page align the addresses to work
107 * around bug I17 in the 68060.
108 */
109 if ((tmp = -paddr & (PAGE_SIZE - 1))) {
110 pushcl040(paddr & PAGE_MASK);
111 if ((len -= tmp) <= 0)
112 return;
113 paddr += tmp;
114 }
115 tmp = PAGE_SIZE;
116 paddr &= PAGE_MASK;
117 while ((len -= tmp) >= 0) {
118 clear040(paddr);
119 paddr += tmp;
120 }
121 if ((len += tmp))
122 /* a page boundary gets crossed at the end */
123 pushcl040(paddr);
124 }
125 else /* 68030 or 68020 */
126 asm volatile ("movec %/cacr,%/d0\n\t"
127 "oriw %0,%/d0\n\t"
128 "movec %/d0,%/cacr"
129 : : "i" (FLUSH_I_AND_D)
130 : "d0");
131#ifdef CONFIG_M68K_L2_CACHE
132 if(mach_l2_flush)
133 mach_l2_flush(0);
134#endif
135}
136EXPORT_SYMBOL(cache_clear);
137
138
139/*
140 * cache_push() semantics: Write back any dirty cache data in the given area,
141 * and invalidate the range in the instruction cache. It needs not (but may)
142 * invalidate those entries also in the data cache. The range is defined by a
143 * _physical_ address.
144 */
145
146void cache_push (unsigned long paddr, int len)
147{
148 if (CPU_IS_COLDFIRE) {
149 flush_cf_bcache(0, DCACHE_MAX_ADDR);
150 } else if (CPU_IS_040_OR_060) {
151 int tmp = PAGE_SIZE;
152
153 /*
154 * on 68040 or 68060, push cache lines for pages in the range;
155 * on the '040 this also invalidates the pushed lines, but not on
156 * the '060!
157 */
158 len += paddr & (PAGE_SIZE - 1);
159
160 /*
161 * Work around bug I17 in the 68060 affecting some instruction
162 * lines not being invalidated properly.
163 */
164 paddr &= PAGE_MASK;
165
166 do {
167 push040(paddr);
168 paddr += tmp;
169 } while ((len -= tmp) > 0);
170 }
171 /*
172 * 68030/68020 have no writeback cache. On the other hand,
173 * cache_push is actually a superset of cache_clear (the lines
174 * get written back and invalidated), so we should make sure
175 * to perform the corresponding actions. After all, this is getting
176 * called in places where we've just loaded code, or whatever, so
177 * flushing the icache is appropriate; flushing the dcache shouldn't
178 * be required.
179 */
180 else /* 68030 or 68020 */
181 asm volatile ("movec %/cacr,%/d0\n\t"
182 "oriw %0,%/d0\n\t"
183 "movec %/d0,%/cacr"
184 : : "i" (FLUSH_I)
185 : "d0");
186#ifdef CONFIG_M68K_L2_CACHE
187 if(mach_l2_flush)
188 mach_l2_flush(1);
189#endif
190}
191EXPORT_SYMBOL(cache_push);
192
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * linux/arch/m68k/mm/memory.c
4 *
5 * Copyright (C) 1995 Hamish Macdonald
6 */
7
8#include <linux/module.h>
9#include <linux/mm.h>
10#include <linux/kernel.h>
11#include <linux/string.h>
12#include <linux/types.h>
13#include <linux/init.h>
14#include <linux/pagemap.h>
15#include <linux/gfp.h>
16
17#include <asm/setup.h>
18#include <asm/segment.h>
19#include <asm/page.h>
20#include <asm/pgalloc.h>
21#include <asm/traps.h>
22#include <asm/machdep.h>
23
24
25/* ++andreas: {get,free}_pointer_table rewritten to use unused fields from
26 struct page instead of separately kmalloced struct. Stolen from
27 arch/sparc/mm/srmmu.c ... */
28
29typedef struct list_head ptable_desc;
30static LIST_HEAD(ptable_list);
31
32#define PD_PTABLE(page) ((ptable_desc *)&(virt_to_page(page)->lru))
33#define PD_PAGE(ptable) (list_entry(ptable, struct page, lru))
34#define PD_MARKBITS(dp) (*(unsigned char *)&PD_PAGE(dp)->index)
35
36#define PTABLE_SIZE (PTRS_PER_PMD * sizeof(pmd_t))
37
38void __init init_pointer_table(unsigned long ptable)
39{
40 ptable_desc *dp;
41 unsigned long page = ptable & PAGE_MASK;
42 unsigned char mask = 1 << ((ptable - page)/PTABLE_SIZE);
43
44 dp = PD_PTABLE(page);
45 if (!(PD_MARKBITS(dp) & mask)) {
46 PD_MARKBITS(dp) = 0xff;
47 list_add(dp, &ptable_list);
48 }
49
50 PD_MARKBITS(dp) &= ~mask;
51 pr_debug("init_pointer_table: %lx, %x\n", ptable, PD_MARKBITS(dp));
52
53 /* unreserve the page so it's possible to free that page */
54 __ClearPageReserved(PD_PAGE(dp));
55 init_page_count(PD_PAGE(dp));
56
57 return;
58}
59
60pmd_t *get_pointer_table (void)
61{
62 ptable_desc *dp = ptable_list.next;
63 unsigned char mask = PD_MARKBITS (dp);
64 unsigned char tmp;
65 unsigned int off;
66
67 /*
68 * For a pointer table for a user process address space, a
69 * table is taken from a page allocated for the purpose. Each
70 * page can hold 8 pointer tables. The page is remapped in
71 * virtual address space to be noncacheable.
72 */
73 if (mask == 0) {
74 void *page;
75 ptable_desc *new;
76
77 if (!(page = (void *)get_zeroed_page(GFP_KERNEL)))
78 return NULL;
79
80 flush_tlb_kernel_page(page);
81 nocache_page(page);
82
83 new = PD_PTABLE(page);
84 PD_MARKBITS(new) = 0xfe;
85 list_add_tail(new, dp);
86
87 return (pmd_t *)page;
88 }
89
90 for (tmp = 1, off = 0; (mask & tmp) == 0; tmp <<= 1, off += PTABLE_SIZE)
91 ;
92 PD_MARKBITS(dp) = mask & ~tmp;
93 if (!PD_MARKBITS(dp)) {
94 /* move to end of list */
95 list_move_tail(dp, &ptable_list);
96 }
97 return (pmd_t *) (page_address(PD_PAGE(dp)) + off);
98}
99
100int free_pointer_table (pmd_t *ptable)
101{
102 ptable_desc *dp;
103 unsigned long page = (unsigned long)ptable & PAGE_MASK;
104 unsigned char mask = 1 << (((unsigned long)ptable - page)/PTABLE_SIZE);
105
106 dp = PD_PTABLE(page);
107 if (PD_MARKBITS (dp) & mask)
108 panic ("table already free!");
109
110 PD_MARKBITS (dp) |= mask;
111
112 if (PD_MARKBITS(dp) == 0xff) {
113 /* all tables in page are free, free page */
114 list_del(dp);
115 cache_page((void *)page);
116 free_page (page);
117 return 1;
118 } else if (ptable_list.next != dp) {
119 /*
120 * move this descriptor to the front of the list, since
121 * it has one or more free tables.
122 */
123 list_move(dp, &ptable_list);
124 }
125 return 0;
126}
127
128/* invalidate page in both caches */
129static inline void clear040(unsigned long paddr)
130{
131 asm volatile (
132 "nop\n\t"
133 ".chip 68040\n\t"
134 "cinvp %%bc,(%0)\n\t"
135 ".chip 68k"
136 : : "a" (paddr));
137}
138
139/* invalidate page in i-cache */
140static inline void cleari040(unsigned long paddr)
141{
142 asm volatile (
143 "nop\n\t"
144 ".chip 68040\n\t"
145 "cinvp %%ic,(%0)\n\t"
146 ".chip 68k"
147 : : "a" (paddr));
148}
149
150/* push page in both caches */
151/* RZ: cpush %bc DOES invalidate %ic, regardless of DPI */
152static inline void push040(unsigned long paddr)
153{
154 asm volatile (
155 "nop\n\t"
156 ".chip 68040\n\t"
157 "cpushp %%bc,(%0)\n\t"
158 ".chip 68k"
159 : : "a" (paddr));
160}
161
162/* push and invalidate page in both caches, must disable ints
163 * to avoid invalidating valid data */
164static inline void pushcl040(unsigned long paddr)
165{
166 unsigned long flags;
167
168 local_irq_save(flags);
169 push040(paddr);
170 if (CPU_IS_060)
171 clear040(paddr);
172 local_irq_restore(flags);
173}
174
175/*
176 * 040: Hit every page containing an address in the range paddr..paddr+len-1.
177 * (Low order bits of the ea of a CINVP/CPUSHP are "don't care"s).
178 * Hit every page until there is a page or less to go. Hit the next page,
179 * and the one after that if the range hits it.
180 */
181/* ++roman: A little bit more care is required here: The CINVP instruction
182 * invalidates cache entries WITHOUT WRITING DIRTY DATA BACK! So the beginning
183 * and the end of the region must be treated differently if they are not
184 * exactly at the beginning or end of a page boundary. Else, maybe too much
185 * data becomes invalidated and thus lost forever. CPUSHP does what we need:
186 * it invalidates the page after pushing dirty data to memory. (Thanks to Jes
187 * for discovering the problem!)
188 */
189/* ... but on the '060, CPUSH doesn't invalidate (for us, since we have set
190 * the DPI bit in the CACR; would it cause problems with temporarily changing
191 * this?). So we have to push first and then additionally to invalidate.
192 */
193
194
195/*
196 * cache_clear() semantics: Clear any cache entries for the area in question,
197 * without writing back dirty entries first. This is useful if the data will
198 * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
199 * _physical_ address.
200 */
201
202void cache_clear (unsigned long paddr, int len)
203{
204 if (CPU_IS_COLDFIRE) {
205 clear_cf_bcache(0, DCACHE_MAX_ADDR);
206 } else if (CPU_IS_040_OR_060) {
207 int tmp;
208
209 /*
210 * We need special treatment for the first page, in case it
211 * is not page-aligned. Page align the addresses to work
212 * around bug I17 in the 68060.
213 */
214 if ((tmp = -paddr & (PAGE_SIZE - 1))) {
215 pushcl040(paddr & PAGE_MASK);
216 if ((len -= tmp) <= 0)
217 return;
218 paddr += tmp;
219 }
220 tmp = PAGE_SIZE;
221 paddr &= PAGE_MASK;
222 while ((len -= tmp) >= 0) {
223 clear040(paddr);
224 paddr += tmp;
225 }
226 if ((len += tmp))
227 /* a page boundary gets crossed at the end */
228 pushcl040(paddr);
229 }
230 else /* 68030 or 68020 */
231 asm volatile ("movec %/cacr,%/d0\n\t"
232 "oriw %0,%/d0\n\t"
233 "movec %/d0,%/cacr"
234 : : "i" (FLUSH_I_AND_D)
235 : "d0");
236#ifdef CONFIG_M68K_L2_CACHE
237 if(mach_l2_flush)
238 mach_l2_flush(0);
239#endif
240}
241EXPORT_SYMBOL(cache_clear);
242
243
244/*
245 * cache_push() semantics: Write back any dirty cache data in the given area,
246 * and invalidate the range in the instruction cache. It needs not (but may)
247 * invalidate those entries also in the data cache. The range is defined by a
248 * _physical_ address.
249 */
250
251void cache_push (unsigned long paddr, int len)
252{
253 if (CPU_IS_COLDFIRE) {
254 flush_cf_bcache(0, DCACHE_MAX_ADDR);
255 } else if (CPU_IS_040_OR_060) {
256 int tmp = PAGE_SIZE;
257
258 /*
259 * on 68040 or 68060, push cache lines for pages in the range;
260 * on the '040 this also invalidates the pushed lines, but not on
261 * the '060!
262 */
263 len += paddr & (PAGE_SIZE - 1);
264
265 /*
266 * Work around bug I17 in the 68060 affecting some instruction
267 * lines not being invalidated properly.
268 */
269 paddr &= PAGE_MASK;
270
271 do {
272 push040(paddr);
273 paddr += tmp;
274 } while ((len -= tmp) > 0);
275 }
276 /*
277 * 68030/68020 have no writeback cache. On the other hand,
278 * cache_push is actually a superset of cache_clear (the lines
279 * get written back and invalidated), so we should make sure
280 * to perform the corresponding actions. After all, this is getting
281 * called in places where we've just loaded code, or whatever, so
282 * flushing the icache is appropriate; flushing the dcache shouldn't
283 * be required.
284 */
285 else /* 68030 or 68020 */
286 asm volatile ("movec %/cacr,%/d0\n\t"
287 "oriw %0,%/d0\n\t"
288 "movec %/d0,%/cacr"
289 : : "i" (FLUSH_I)
290 : "d0");
291#ifdef CONFIG_M68K_L2_CACHE
292 if(mach_l2_flush)
293 mach_l2_flush(1);
294#endif
295}
296EXPORT_SYMBOL(cache_push);
297