Loading...
Note: File does not exist in v6.2.
1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-msm8974.dtsi"
3#include "qcom-pm8841.dtsi"
4#include "qcom-pm8941.dtsi"
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/input/input.h>
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9/ {
10 model = "Sony Xperia Z1 Compact";
11 compatible = "sony,xperia-amami", "qcom,msm8974";
12
13 aliases {
14 serial0 = &blsp1_uart2;
15 };
16
17 chosen {
18 stdout-path = "serial0:115200n8";
19 };
20
21 gpio-keys {
22 compatible = "gpio-keys";
23 input-name = "gpio-keys";
24
25 pinctrl-names = "default";
26 pinctrl-0 = <&gpio_keys_pin_a>;
27
28 volume-down {
29 label = "volume_down";
30 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
31 linux,input-type = <1>;
32 linux,code = <KEY_VOLUMEDOWN>;
33 };
34
35 camera-snapshot {
36 label = "camera_snapshot";
37 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
38 linux,input-type = <1>;
39 linux,code = <KEY_CAMERA>;
40 };
41
42 camera-focus {
43 label = "camera_focus";
44 gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
45 linux,input-type = <1>;
46 linux,code = <KEY_CAMERA_FOCUS>;
47 };
48
49 volume-up {
50 label = "volume_up";
51 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
52 linux,input-type = <1>;
53 linux,code = <KEY_VOLUMEUP>;
54 };
55 };
56
57 memory@0 {
58 reg = <0 0x40000000>, <0x40000000 0x40000000>;
59 device_type = "memory";
60 };
61
62 smd {
63 rpm {
64 rpm_requests {
65 pm8841-regulators {
66 s1 {
67 regulator-min-microvolt = <675000>;
68 regulator-max-microvolt = <1050000>;
69 };
70
71 s2 {
72 regulator-min-microvolt = <500000>;
73 regulator-max-microvolt = <1050000>;
74 };
75
76 s3 {
77 regulator-min-microvolt = <500000>;
78 regulator-max-microvolt = <1050000>;
79 };
80
81 s4 {
82 regulator-min-microvolt = <500000>;
83 regulator-max-microvolt = <1050000>;
84 };
85 };
86
87 pm8941-regulators {
88 vdd_l1_l3-supply = <&pm8941_s1>;
89 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
90 vdd_l4_l11-supply = <&pm8941_s1>;
91 vdd_l5_l7-supply = <&pm8941_s2>;
92 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
93 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
94 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
95 vdd_l21-supply = <&vreg_boost>;
96
97 s1 {
98 regulator-min-microvolt = <1300000>;
99 regulator-max-microvolt = <1300000>;
100 regulator-always-on;
101 regulator-boot-on;
102 };
103
104 s2 {
105 regulator-min-microvolt = <2150000>;
106 regulator-max-microvolt = <2150000>;
107 regulator-boot-on;
108 };
109
110 s3 {
111 regulator-min-microvolt = <1800000>;
112 regulator-max-microvolt = <1800000>;
113 regulator-always-on;
114 regulator-boot-on;
115 };
116
117 s4 {
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
120 };
121
122 l1 {
123 regulator-min-microvolt = <1225000>;
124 regulator-max-microvolt = <1225000>;
125
126 regulator-always-on;
127 regulator-boot-on;
128 };
129
130 l2 {
131 regulator-min-microvolt = <1200000>;
132 regulator-max-microvolt = <1200000>;
133 };
134
135 l3 {
136 regulator-min-microvolt = <1200000>;
137 regulator-max-microvolt = <1200000>;
138 };
139
140 l4 {
141 regulator-min-microvolt = <1225000>;
142 regulator-max-microvolt = <1225000>;
143 };
144
145 l5 {
146 regulator-min-microvolt = <1800000>;
147 regulator-max-microvolt = <1800000>;
148 };
149
150 l6 {
151 regulator-min-microvolt = <1800000>;
152 regulator-max-microvolt = <1800000>;
153
154 regulator-boot-on;
155 };
156
157 l7 {
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <1800000>;
160
161 regulator-boot-on;
162 };
163
164 l8 {
165 regulator-min-microvolt = <1800000>;
166 regulator-max-microvolt = <1800000>;
167 };
168
169 l9 {
170 regulator-min-microvolt = <1800000>;
171 regulator-max-microvolt = <2950000>;
172 };
173
174 l11 {
175 regulator-min-microvolt = <1300000>;
176 regulator-max-microvolt = <1350000>;
177 };
178
179 l12 {
180 regulator-min-microvolt = <1800000>;
181 regulator-max-microvolt = <1800000>;
182
183 regulator-always-on;
184 regulator-boot-on;
185 };
186
187 l13 {
188 regulator-min-microvolt = <1800000>;
189 regulator-max-microvolt = <2950000>;
190
191 regulator-boot-on;
192 };
193
194 l14 {
195 regulator-min-microvolt = <1800000>;
196 regulator-max-microvolt = <1800000>;
197 };
198
199 l15 {
200 regulator-min-microvolt = <2050000>;
201 regulator-max-microvolt = <2050000>;
202 };
203
204 l16 {
205 regulator-min-microvolt = <2700000>;
206 regulator-max-microvolt = <2700000>;
207 };
208
209 l17 {
210 regulator-min-microvolt = <2700000>;
211 regulator-max-microvolt = <2700000>;
212 };
213
214 l18 {
215 regulator-min-microvolt = <2850000>;
216 regulator-max-microvolt = <2850000>;
217 };
218
219 l19 {
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
222 };
223
224 l20 {
225 regulator-min-microvolt = <2950000>;
226 regulator-max-microvolt = <2950000>;
227
228 regulator-allow-set-load;
229 regulator-boot-on;
230 regulator-system-load = <200000>;
231 };
232
233 l21 {
234 regulator-min-microvolt = <2950000>;
235 regulator-max-microvolt = <2950000>;
236
237 regulator-boot-on;
238 };
239
240 l22 {
241 regulator-min-microvolt = <3000000>;
242 regulator-max-microvolt = <3000000>;
243 };
244
245 l23 {
246 regulator-min-microvolt = <2800000>;
247 regulator-max-microvolt = <2800000>;
248 };
249
250 l24 {
251 regulator-min-microvolt = <3075000>;
252 regulator-max-microvolt = <3075000>;
253
254 regulator-boot-on;
255 };
256 };
257 };
258 };
259 };
260};
261
262&soc {
263 sdhci@f9824900 {
264 status = "ok";
265
266 vmmc-supply = <&pm8941_l20>;
267 vqmmc-supply = <&pm8941_s3>;
268
269 bus-width = <8>;
270 non-removable;
271
272 pinctrl-names = "default";
273 pinctrl-0 = <&sdhc1_pin_a>;
274 };
275
276 sdhci@f98a4900 {
277 status = "ok";
278
279 bus-width = <4>;
280
281 vmmc-supply = <&pm8941_l21>;
282 vqmmc-supply = <&pm8941_l13>;
283
284 cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
285
286 pinctrl-names = "default";
287 pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
288 };
289
290 serial@f991e000 {
291 status = "ok";
292
293 pinctrl-names = "default";
294 pinctrl-0 = <&blsp1_uart2_pin_a>;
295 };
296
297
298 pinctrl@fd510000 {
299 blsp1_uart2_pin_a: blsp1-uart2-pin-active {
300 rx {
301 pins = "gpio5";
302 function = "blsp_uart2";
303
304 drive-strength = <2>;
305 bias-pull-up;
306 };
307
308 tx {
309 pins = "gpio4";
310 function = "blsp_uart2";
311
312 drive-strength = <4>;
313 bias-disable;
314 };
315 };
316
317 i2c2_pins: i2c2 {
318 mux {
319 pins = "gpio6", "gpio7";
320 function = "blsp_i2c2";
321
322 drive-strength = <2>;
323 bias-disable;
324 };
325 };
326
327 sdhc1_pin_a: sdhc1-pin-active {
328 clk {
329 pins = "sdc1_clk";
330 drive-strength = <16>;
331 bias-disable;
332 };
333
334 cmd-data {
335 pins = "sdc1_cmd", "sdc1_data";
336 drive-strength = <10>;
337 bias-pull-up;
338 };
339 };
340
341 sdhc2_cd_pin_a: sdhc2-cd-pin-active {
342 pins = "gpio62";
343 function = "gpio";
344
345 drive-strength = <2>;
346 bias-disable;
347 };
348
349 sdhc2_pin_a: sdhc2-pin-active {
350 clk {
351 pins = "sdc2_clk";
352 drive-strength = <10>;
353 bias-disable;
354 };
355
356 cmd-data {
357 pins = "sdc2_cmd", "sdc2_data";
358 drive-strength = <6>;
359 bias-pull-up;
360 };
361 };
362 };
363
364 dma-controller@f9944000 {
365 qcom,controlled-remotely;
366 };
367
368 usb@f9a55000 {
369 status = "ok";
370
371 phys = <&usb_hs1_phy>;
372 phy-select = <&tcsr 0xb000 0>;
373 extcon = <&smbb>, <&usb_id>;
374 vbus-supply = <&chg_otg>;
375
376 hnp-disable;
377 srp-disable;
378 adp-disable;
379
380 ulpi {
381 phy@a {
382 status = "ok";
383
384 v1p8-supply = <&pm8941_l6>;
385 v3p3-supply = <&pm8941_l24>;
386
387 extcon = <&smbb>;
388 qcom,init-seq = /bits/ 8 <0x1 0x64>;
389 };
390 };
391 };
392};
393
394&spmi_bus {
395 pm8941@0 {
396 charger@1000 {
397 qcom,fast-charge-safe-current = <1300000>;
398 qcom,fast-charge-current-limit = <1300000>;
399 qcom,dc-current-limit = <1300000>;
400 qcom,fast-charge-safe-voltage = <4400000>;
401 qcom,fast-charge-high-threshold-voltage = <4350000>;
402 qcom,fast-charge-low-threshold-voltage = <3400000>;
403 qcom,auto-recharge-threshold-voltage = <4200000>;
404 qcom,minimum-input-voltage = <4300000>;
405 };
406
407 gpios@c000 {
408 gpio_keys_pin_a: gpio-keys-active {
409 pins = "gpio2", "gpio3", "gpio4", "gpio5";
410 function = "normal";
411
412 bias-pull-up;
413 power-source = <PM8941_GPIO_S3>;
414 };
415 };
416
417 coincell@2800 {
418 status = "ok";
419 qcom,rset-ohms = <2100>;
420 qcom,vset-millivolts = <3000>;
421 };
422 };
423
424 pm8941@1 {
425 wled@d800 {
426 status = "ok";
427
428 qcom,cs-out;
429 qcom,current-limit = <20>;
430 qcom,current-boost-limit = <805>;
431 qcom,switching-freq = <1600>;
432 qcom,ovp = <29>;
433 qcom,num-strings = <2>;
434 };
435 };
436};