Linux Audio

Check our new training course

Loading...
v6.2
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Elantech Touchpad driver (v6)
   4 *
   5 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
   6 *
   7 * Trademarks are the property of their respective owners.
   8 */
   9
  10#include <linux/delay.h>
  11#include <linux/dmi.h>
  12#include <linux/slab.h>
  13#include <linux/module.h>
  14#include <linux/i2c.h>
  15#include <linux/input.h>
  16#include <linux/input/mt.h>
  17#include <linux/platform_device.h>
  18#include <linux/serio.h>
  19#include <linux/libps2.h>
  20#include <asm/unaligned.h>
  21#include "psmouse.h"
  22#include "elantech.h"
  23#include "elan_i2c.h"
  24
  25#define elantech_debug(fmt, ...)					\
  26	do {								\
  27		if (etd->info.debug)					\
  28			psmouse_printk(KERN_DEBUG, psmouse,		\
  29					fmt, ##__VA_ARGS__);		\
  30	} while (0)
  31
  32/*
  33 * Send a Synaptics style sliced query command
  34 */
  35static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
  36				unsigned char *param)
  37{
  38	if (ps2_sliced_command(&psmouse->ps2dev, c) ||
  39	    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
  40		psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
  41		return -1;
  42	}
  43
  44	return 0;
  45}
  46
  47/*
  48 * V3 and later support this fast command
  49 */
  50static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c,
  51				unsigned char *param)
  52{
  53	struct ps2dev *ps2dev = &psmouse->ps2dev;
  54
  55	if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) ||
  56	    ps2_command(ps2dev, NULL, c) ||
  57	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
  58		psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
  59		return -1;
  60	}
  61
  62	return 0;
  63}
  64
  65/*
  66 * A retrying version of ps2_command
  67 */
  68static int elantech_ps2_command(struct psmouse *psmouse,
  69				unsigned char *param, int command)
  70{
  71	struct ps2dev *ps2dev = &psmouse->ps2dev;
  72	struct elantech_data *etd = psmouse->private;
  73	int rc;
  74	int tries = ETP_PS2_COMMAND_TRIES;
  75
  76	do {
  77		rc = ps2_command(ps2dev, param, command);
  78		if (rc == 0)
  79			break;
  80		tries--;
  81		elantech_debug("retrying ps2 command 0x%02x (%d).\n",
  82				command, tries);
  83		msleep(ETP_PS2_COMMAND_DELAY);
  84	} while (tries > 0);
  85
  86	if (rc)
  87		psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command);
  88
  89	return rc;
  90}
  91
  92/*
  93 * Send an Elantech style special command to read 3 bytes from a register
  94 */
  95static int elantech_read_reg_params(struct psmouse *psmouse, u8 reg, u8 *param)
  96{
  97	if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
  98	    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
  99	    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 100	    elantech_ps2_command(psmouse, NULL, reg) ||
 101	    elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
 102		psmouse_err(psmouse,
 103			    "failed to read register %#02x\n", reg);
 104		return -EIO;
 105	}
 106
 107	return 0;
 108}
 109
 110/*
 111 * Send an Elantech style special command to write a register with a parameter
 112 */
 113static int elantech_write_reg_params(struct psmouse *psmouse, u8 reg, u8 *param)
 114{
 115	if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 116	    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 117	    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 118	    elantech_ps2_command(psmouse, NULL, reg) ||
 119	    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 120	    elantech_ps2_command(psmouse, NULL, param[0]) ||
 121	    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 122	    elantech_ps2_command(psmouse, NULL, param[1]) ||
 123	    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
 124		psmouse_err(psmouse,
 125			    "failed to write register %#02x with value %#02x%#02x\n",
 126			    reg, param[0], param[1]);
 127		return -EIO;
 128	}
 129
 130	return 0;
 131}
 132
 133/*
 134 * Send an Elantech style special command to read a value from a register
 135 */
 136static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
 137				unsigned char *val)
 138{
 139	struct elantech_data *etd = psmouse->private;
 140	unsigned char param[3];
 141	int rc = 0;
 142
 143	if (reg < 0x07 || reg > 0x26)
 144		return -1;
 145
 146	if (reg > 0x11 && reg < 0x20)
 147		return -1;
 148
 149	switch (etd->info.hw_version) {
 150	case 1:
 151		if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_READ) ||
 152		    ps2_sliced_command(&psmouse->ps2dev, reg) ||
 153		    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
 154			rc = -1;
 155		}
 156		break;
 157
 158	case 2:
 159		if (elantech_ps2_command(psmouse,  NULL, ETP_PS2_CUSTOM_COMMAND) ||
 160		    elantech_ps2_command(psmouse,  NULL, ETP_REGISTER_READ) ||
 161		    elantech_ps2_command(psmouse,  NULL, ETP_PS2_CUSTOM_COMMAND) ||
 162		    elantech_ps2_command(psmouse,  NULL, reg) ||
 163		    elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
 164			rc = -1;
 165		}
 166		break;
 167
 168	case 3 ... 4:
 169		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 170		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 171		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 172		    elantech_ps2_command(psmouse, NULL, reg) ||
 173		    elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
 174			rc = -1;
 175		}
 176		break;
 177	}
 178
 179	if (rc)
 180		psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg);
 181	else if (etd->info.hw_version != 4)
 182		*val = param[0];
 183	else
 184		*val = param[1];
 185
 186	return rc;
 187}
 188
 189/*
 190 * Send an Elantech style special command to write a register with a value
 191 */
 192static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
 193				unsigned char val)
 194{
 195	struct elantech_data *etd = psmouse->private;
 196	int rc = 0;
 197
 198	if (reg < 0x07 || reg > 0x26)
 199		return -1;
 200
 201	if (reg > 0x11 && reg < 0x20)
 202		return -1;
 203
 204	switch (etd->info.hw_version) {
 205	case 1:
 206		if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_WRITE) ||
 207		    ps2_sliced_command(&psmouse->ps2dev, reg) ||
 208		    ps2_sliced_command(&psmouse->ps2dev, val) ||
 209		    ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) {
 210			rc = -1;
 211		}
 212		break;
 213
 214	case 2:
 215		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 216		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) ||
 217		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 218		    elantech_ps2_command(psmouse, NULL, reg) ||
 219		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 220		    elantech_ps2_command(psmouse, NULL, val) ||
 221		    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
 222			rc = -1;
 223		}
 224		break;
 225
 226	case 3:
 227		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 228		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 229		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 230		    elantech_ps2_command(psmouse, NULL, reg) ||
 231		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 232		    elantech_ps2_command(psmouse, NULL, val) ||
 233		    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
 234			rc = -1;
 235		}
 236		break;
 237
 238	case 4:
 239		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 240		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 241		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 242		    elantech_ps2_command(psmouse, NULL, reg) ||
 243		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 244		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 245		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 246		    elantech_ps2_command(psmouse, NULL, val) ||
 247		    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
 248			rc = -1;
 249		}
 250		break;
 251	}
 252
 253	if (rc)
 254		psmouse_err(psmouse,
 255			    "failed to write register 0x%02x with value 0x%02x.\n",
 256			    reg, val);
 257
 258	return rc;
 259}
 260
 261/*
 262 * Dump a complete mouse movement packet to the syslog
 263 */
 264static void elantech_packet_dump(struct psmouse *psmouse)
 265{
 266	psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet [%*ph]\n",
 267		       psmouse->pktsize, psmouse->packet);
 268}
 269
 270/*
 271 * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in
 272 * fw_version for this is based on the following fw_version & caps table:
 273 *
 274 * Laptop-model:           fw_version:     caps:           buttons:
 275 * Acer S3                 0x461f00        10, 13, 0e      clickpad
 276 * Acer S7-392             0x581f01        50, 17, 0d      clickpad
 277 * Acer V5-131             0x461f02        01, 16, 0c      clickpad
 278 * Acer V5-551             0x461f00        ?               clickpad
 279 * Asus K53SV              0x450f01        78, 15, 0c      2 hw buttons
 280 * Asus G46VW              0x460f02        00, 18, 0c      2 hw buttons
 281 * Asus G750JX             0x360f00        00, 16, 0c      2 hw buttons
 282 * Asus TP500LN            0x381f17        10, 14, 0e      clickpad
 283 * Asus X750JN             0x381f17        10, 14, 0e      clickpad
 284 * Asus UX31               0x361f00        20, 15, 0e      clickpad
 285 * Asus UX32VD             0x361f02        00, 15, 0e      clickpad
 286 * Avatar AVIU-145A2       0x361f00        ?               clickpad
 287 * Fujitsu CELSIUS H760    0x570f02        40, 14, 0c      3 hw buttons (**)
 288 * Fujitsu CELSIUS H780    0x5d0f02        41, 16, 0d      3 hw buttons (**)
 289 * Fujitsu LIFEBOOK E544   0x470f00        d0, 12, 09      2 hw buttons
 290 * Fujitsu LIFEBOOK E546   0x470f00        50, 12, 09      2 hw buttons
 291 * Fujitsu LIFEBOOK E547   0x470f00        50, 12, 09      2 hw buttons
 292 * Fujitsu LIFEBOOK E554   0x570f01        40, 14, 0c      2 hw buttons
 293 * Fujitsu LIFEBOOK E557   0x570f01        40, 14, 0c      2 hw buttons
 294 * Fujitsu T725            0x470f01        05, 12, 09      2 hw buttons
 295 * Fujitsu H730            0x570f00        c0, 14, 0c      3 hw buttons (**)
 296 * Gigabyte U2442          0x450f01        58, 17, 0c      2 hw buttons
 297 * Lenovo L430             0x350f02        b9, 15, 0c      2 hw buttons (*)
 298 * Lenovo L530             0x350f02        b9, 15, 0c      2 hw buttons (*)
 299 * Samsung NF210           0x150b00        78, 14, 0a      2 hw buttons
 300 * Samsung NP770Z5E        0x575f01        10, 15, 0f      clickpad
 301 * Samsung NP700Z5B        0x361f06        21, 15, 0f      clickpad
 302 * Samsung NP900X3E-A02    0x575f03        ?               clickpad
 303 * Samsung NP-QX410        0x851b00        19, 14, 0c      clickpad
 304 * Samsung RC512           0x450f00        08, 15, 0c      2 hw buttons
 305 * Samsung RF710           0x450f00        ?               2 hw buttons
 306 * System76 Pangolin       0x250f01        ?               2 hw buttons
 307 * (*) + 3 trackpoint buttons
 308 * (**) + 0 trackpoint buttons
 309 * Note: Lenovo L430 and Lenovo L530 have the same fw_version/caps
 310 */
 311static inline int elantech_is_buttonpad(struct elantech_device_info *info)
 312{
 313	return info->fw_version & 0x001000;
 314}
 315
 316/*
 317 * Interpret complete data packets and report absolute mode input events for
 318 * hardware version 1. (4 byte packets)
 319 */
 320static void elantech_report_absolute_v1(struct psmouse *psmouse)
 321{
 322	struct input_dev *dev = psmouse->dev;
 323	struct elantech_data *etd = psmouse->private;
 324	unsigned char *packet = psmouse->packet;
 325	int fingers;
 326
 327	if (etd->info.fw_version < 0x020000) {
 328		/*
 329		 * byte 0:  D   U  p1  p2   1  p3   R   L
 330		 * byte 1:  f   0  th  tw  x9  x8  y9  y8
 331		 */
 332		fingers = ((packet[1] & 0x80) >> 7) +
 333				((packet[1] & 0x30) >> 4);
 334	} else {
 335		/*
 336		 * byte 0: n1  n0  p2  p1   1  p3   R   L
 337		 * byte 1:  0   0   0   0  x9  x8  y9  y8
 338		 */
 339		fingers = (packet[0] & 0xc0) >> 6;
 340	}
 341
 342	if (etd->info.jumpy_cursor) {
 343		if (fingers != 1) {
 344			etd->single_finger_reports = 0;
 345		} else if (etd->single_finger_reports < 2) {
 346			/* Discard first 2 reports of one finger, bogus */
 347			etd->single_finger_reports++;
 348			elantech_debug("discarding packet\n");
 349			return;
 350		}
 351	}
 352
 353	input_report_key(dev, BTN_TOUCH, fingers != 0);
 354
 355	/*
 356	 * byte 2: x7  x6  x5  x4  x3  x2  x1  x0
 357	 * byte 3: y7  y6  y5  y4  y3  y2  y1  y0
 358	 */
 359	if (fingers) {
 360		input_report_abs(dev, ABS_X,
 361			((packet[1] & 0x0c) << 6) | packet[2]);
 362		input_report_abs(dev, ABS_Y,
 363			etd->y_max - (((packet[1] & 0x03) << 8) | packet[3]));
 364	}
 365
 366	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 367	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 368	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 369
 370	psmouse_report_standard_buttons(dev, packet[0]);
 371
 372	if (etd->info.fw_version < 0x020000 &&
 373	    (etd->info.capabilities[0] & ETP_CAP_HAS_ROCKER)) {
 374		/* rocker up */
 375		input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
 376		/* rocker down */
 377		input_report_key(dev, BTN_BACK, packet[0] & 0x80);
 378	}
 379
 380	input_sync(dev);
 381}
 382
 383static void elantech_set_slot(struct input_dev *dev, int slot, bool active,
 384			      unsigned int x, unsigned int y)
 385{
 386	input_mt_slot(dev, slot);
 387	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
 388	if (active) {
 389		input_report_abs(dev, ABS_MT_POSITION_X, x);
 390		input_report_abs(dev, ABS_MT_POSITION_Y, y);
 391	}
 392}
 393
 394/* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */
 395static void elantech_report_semi_mt_data(struct input_dev *dev,
 396					 unsigned int num_fingers,
 397					 unsigned int x1, unsigned int y1,
 398					 unsigned int x2, unsigned int y2)
 399{
 400	elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
 401	elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2);
 402}
 403
 404/*
 405 * Interpret complete data packets and report absolute mode input events for
 406 * hardware version 2. (6 byte packets)
 407 */
 408static void elantech_report_absolute_v2(struct psmouse *psmouse)
 409{
 410	struct elantech_data *etd = psmouse->private;
 411	struct input_dev *dev = psmouse->dev;
 412	unsigned char *packet = psmouse->packet;
 413	unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
 414	unsigned int width = 0, pres = 0;
 415
 416	/* byte 0: n1  n0   .   .   .   .   R   L */
 417	fingers = (packet[0] & 0xc0) >> 6;
 418
 419	switch (fingers) {
 420	case 3:
 421		/*
 422		 * Same as one finger, except report of more than 3 fingers:
 423		 * byte 3:  n4  .   w1  w0   .   .   .   .
 424		 */
 425		if (packet[3] & 0x80)
 426			fingers = 4;
 427		fallthrough;
 428	case 1:
 429		/*
 430		 * byte 1:  .   .   .   .  x11 x10 x9  x8
 431		 * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
 432		 */
 433		x1 = ((packet[1] & 0x0f) << 8) | packet[2];
 434		/*
 435		 * byte 4:  .   .   .   .  y11 y10 y9  y8
 436		 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
 437		 */
 438		y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 439
 440		pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
 441		width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
 442		break;
 443
 444	case 2:
 445		/*
 446		 * The coordinate of each finger is reported separately
 447		 * with a lower resolution for two finger touches:
 448		 * byte 0:  .   .  ay8 ax8  .   .   .   .
 449		 * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
 450		 */
 451		x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
 452		/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
 453		y1 = etd->y_max -
 454			((((packet[0] & 0x20) << 3) | packet[2]) << 2);
 455		/*
 456		 * byte 3:  .   .  by8 bx8  .   .   .   .
 457		 * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
 458		 */
 459		x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
 460		/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
 461		y2 = etd->y_max -
 462			((((packet[3] & 0x20) << 3) | packet[5]) << 2);
 463
 464		/* Unknown so just report sensible values */
 465		pres = 127;
 466		width = 7;
 467		break;
 468	}
 469
 470	input_report_key(dev, BTN_TOUCH, fingers != 0);
 471	if (fingers != 0) {
 472		input_report_abs(dev, ABS_X, x1);
 473		input_report_abs(dev, ABS_Y, y1);
 474	}
 475	elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
 476	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 477	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 478	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 479	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
 480	psmouse_report_standard_buttons(dev, packet[0]);
 481	if (etd->info.reports_pressure) {
 482		input_report_abs(dev, ABS_PRESSURE, pres);
 483		input_report_abs(dev, ABS_TOOL_WIDTH, width);
 484	}
 485
 486	input_sync(dev);
 487}
 488
 489static void elantech_report_trackpoint(struct psmouse *psmouse,
 490				       int packet_type)
 491{
 492	/*
 493	 * byte 0:  0   0  sx  sy   0   M   R   L
 494	 * byte 1:~sx   0   0   0   0   0   0   0
 495	 * byte 2:~sy   0   0   0   0   0   0   0
 496	 * byte 3:  0   0 ~sy ~sx   0   1   1   0
 497	 * byte 4: x7  x6  x5  x4  x3  x2  x1  x0
 498	 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
 499	 *
 500	 * x and y are written in two's complement spread
 501	 * over 9 bits with sx/sy the relative top bit and
 502	 * x7..x0 and y7..y0 the lower bits.
 503	 * The sign of y is opposite to what the input driver
 504	 * expects for a relative movement
 505	 */
 506
 507	struct elantech_data *etd = psmouse->private;
 508	struct input_dev *tp_dev = etd->tp_dev;
 509	unsigned char *packet = psmouse->packet;
 510	int x, y;
 511	u32 t;
 512
 513	t = get_unaligned_le32(&packet[0]);
 514
 515	switch (t & ~7U) {
 516	case 0x06000030U:
 517	case 0x16008020U:
 518	case 0x26800010U:
 519	case 0x36808000U:
 520
 521		/*
 522		 * This firmware misreport coordinates for trackpoint
 523		 * occasionally. Discard packets outside of [-127, 127] range
 524		 * to prevent cursor jumps.
 525		 */
 526		if (packet[4] == 0x80 || packet[5] == 0x80 ||
 527		    packet[1] >> 7 == packet[4] >> 7 ||
 528		    packet[2] >> 7 == packet[5] >> 7) {
 529			elantech_debug("discarding packet [%6ph]\n", packet);
 530			break;
 531
 532		}
 533		x = packet[4] - (int)((packet[1]^0x80) << 1);
 534		y = (int)((packet[2]^0x80) << 1) - packet[5];
 535
 536		psmouse_report_standard_buttons(tp_dev, packet[0]);
 537
 538		input_report_rel(tp_dev, REL_X, x);
 539		input_report_rel(tp_dev, REL_Y, y);
 540
 541		input_sync(tp_dev);
 542
 543		break;
 544
 545	default:
 546		/* Dump unexpected packet sequences if debug=1 (default) */
 547		if (etd->info.debug == 1)
 548			elantech_packet_dump(psmouse);
 549
 550		break;
 551	}
 552}
 553
 554/*
 555 * Interpret complete data packets and report absolute mode input events for
 556 * hardware version 3. (12 byte packets for two fingers)
 557 */
 558static void elantech_report_absolute_v3(struct psmouse *psmouse,
 559					int packet_type)
 560{
 561	struct input_dev *dev = psmouse->dev;
 562	struct elantech_data *etd = psmouse->private;
 563	unsigned char *packet = psmouse->packet;
 564	unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
 565	unsigned int width = 0, pres = 0;
 566
 567	/* byte 0: n1  n0   .   .   .   .   R   L */
 568	fingers = (packet[0] & 0xc0) >> 6;
 569
 570	switch (fingers) {
 571	case 3:
 572	case 1:
 573		/*
 574		 * byte 1:  .   .   .   .  x11 x10 x9  x8
 575		 * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
 576		 */
 577		x1 = ((packet[1] & 0x0f) << 8) | packet[2];
 578		/*
 579		 * byte 4:  .   .   .   .  y11 y10 y9  y8
 580		 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
 581		 */
 582		y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 583		break;
 584
 585	case 2:
 586		if (packet_type == PACKET_V3_HEAD) {
 587			/*
 588			 * byte 1:   .    .    .    .  ax11 ax10 ax9  ax8
 589			 * byte 2: ax7  ax6  ax5  ax4  ax3  ax2  ax1  ax0
 590			 */
 591			etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2];
 592			/*
 593			 * byte 4:   .    .    .    .  ay11 ay10 ay9  ay8
 594			 * byte 5: ay7  ay6  ay5  ay4  ay3  ay2  ay1  ay0
 595			 */
 596			etd->mt[0].y = etd->y_max -
 597				(((packet[4] & 0x0f) << 8) | packet[5]);
 598			/*
 599			 * wait for next packet
 600			 */
 601			return;
 602		}
 603
 604		/* packet_type == PACKET_V3_TAIL */
 605		x1 = etd->mt[0].x;
 606		y1 = etd->mt[0].y;
 607		x2 = ((packet[1] & 0x0f) << 8) | packet[2];
 608		y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 609		break;
 610	}
 611
 612	pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
 613	width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
 614
 615	input_report_key(dev, BTN_TOUCH, fingers != 0);
 616	if (fingers != 0) {
 617		input_report_abs(dev, ABS_X, x1);
 618		input_report_abs(dev, ABS_Y, y1);
 619	}
 620	elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
 621	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 622	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 623	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 624
 625	/* For clickpads map both buttons to BTN_LEFT */
 626	if (elantech_is_buttonpad(&etd->info))
 627		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
 628	else
 629		psmouse_report_standard_buttons(dev, packet[0]);
 630
 631	input_report_abs(dev, ABS_PRESSURE, pres);
 632	input_report_abs(dev, ABS_TOOL_WIDTH, width);
 633
 634	input_sync(dev);
 635}
 636
 637static void elantech_input_sync_v4(struct psmouse *psmouse)
 638{
 639	struct input_dev *dev = psmouse->dev;
 640	struct elantech_data *etd = psmouse->private;
 641	unsigned char *packet = psmouse->packet;
 642
 643	/* For clickpads map both buttons to BTN_LEFT */
 644	if (elantech_is_buttonpad(&etd->info))
 645		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
 646	else
 647		psmouse_report_standard_buttons(dev, packet[0]);
 648
 649	input_mt_report_pointer_emulation(dev, true);
 650	input_sync(dev);
 651}
 652
 653static void process_packet_status_v4(struct psmouse *psmouse)
 654{
 655	struct input_dev *dev = psmouse->dev;
 656	unsigned char *packet = psmouse->packet;
 657	unsigned fingers;
 658	int i;
 659
 660	/* notify finger state change */
 661	fingers = packet[1] & 0x1f;
 662	for (i = 0; i < ETP_MAX_FINGERS; i++) {
 663		if ((fingers & (1 << i)) == 0) {
 664			input_mt_slot(dev, i);
 665			input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
 666		}
 667	}
 668
 669	elantech_input_sync_v4(psmouse);
 670}
 671
 672static void process_packet_head_v4(struct psmouse *psmouse)
 673{
 674	struct input_dev *dev = psmouse->dev;
 675	struct elantech_data *etd = psmouse->private;
 676	unsigned char *packet = psmouse->packet;
 677	int id = ((packet[3] & 0xe0) >> 5) - 1;
 678	int pres, traces;
 679
 680	if (id < 0)
 681		return;
 682
 683	etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2];
 684	etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 685	pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
 686	traces = (packet[0] & 0xf0) >> 4;
 687
 688	input_mt_slot(dev, id);
 689	input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
 690
 691	input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
 692	input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
 693	input_report_abs(dev, ABS_MT_PRESSURE, pres);
 694	input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width);
 695	/* report this for backwards compatibility */
 696	input_report_abs(dev, ABS_TOOL_WIDTH, traces);
 697
 698	elantech_input_sync_v4(psmouse);
 699}
 700
 701static void process_packet_motion_v4(struct psmouse *psmouse)
 702{
 703	struct input_dev *dev = psmouse->dev;
 704	struct elantech_data *etd = psmouse->private;
 705	unsigned char *packet = psmouse->packet;
 706	int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0;
 707	int id, sid;
 708
 709	id = ((packet[0] & 0xe0) >> 5) - 1;
 710	if (id < 0)
 711		return;
 712
 713	sid = ((packet[3] & 0xe0) >> 5) - 1;
 714	weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1;
 715	/*
 716	 * Motion packets give us the delta of x, y values of specific fingers,
 717	 * but in two's complement. Let the compiler do the conversion for us.
 718	 * Also _enlarge_ the numbers to int, in case of overflow.
 719	 */
 720	delta_x1 = (signed char)packet[1];
 721	delta_y1 = (signed char)packet[2];
 722	delta_x2 = (signed char)packet[4];
 723	delta_y2 = (signed char)packet[5];
 724
 725	etd->mt[id].x += delta_x1 * weight;
 726	etd->mt[id].y -= delta_y1 * weight;
 727	input_mt_slot(dev, id);
 728	input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
 729	input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
 730
 731	if (sid >= 0) {
 732		etd->mt[sid].x += delta_x2 * weight;
 733		etd->mt[sid].y -= delta_y2 * weight;
 734		input_mt_slot(dev, sid);
 735		input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x);
 736		input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y);
 737	}
 738
 739	elantech_input_sync_v4(psmouse);
 740}
 741
 742static void elantech_report_absolute_v4(struct psmouse *psmouse,
 743					int packet_type)
 744{
 745	switch (packet_type) {
 746	case PACKET_V4_STATUS:
 747		process_packet_status_v4(psmouse);
 748		break;
 749
 750	case PACKET_V4_HEAD:
 751		process_packet_head_v4(psmouse);
 752		break;
 753
 754	case PACKET_V4_MOTION:
 755		process_packet_motion_v4(psmouse);
 756		break;
 757
 758	case PACKET_UNKNOWN:
 759	default:
 760		/* impossible to get here */
 761		break;
 762	}
 763}
 764
 765static int elantech_packet_check_v1(struct psmouse *psmouse)
 766{
 767	struct elantech_data *etd = psmouse->private;
 768	unsigned char *packet = psmouse->packet;
 769	unsigned char p1, p2, p3;
 770
 771	/* Parity bits are placed differently */
 772	if (etd->info.fw_version < 0x020000) {
 773		/* byte 0:  D   U  p1  p2   1  p3   R   L */
 774		p1 = (packet[0] & 0x20) >> 5;
 775		p2 = (packet[0] & 0x10) >> 4;
 776	} else {
 777		/* byte 0: n1  n0  p2  p1   1  p3   R   L */
 778		p1 = (packet[0] & 0x10) >> 4;
 779		p2 = (packet[0] & 0x20) >> 5;
 780	}
 781
 782	p3 = (packet[0] & 0x04) >> 2;
 783
 784	return etd->parity[packet[1]] == p1 &&
 785	       etd->parity[packet[2]] == p2 &&
 786	       etd->parity[packet[3]] == p3;
 787}
 788
 789static int elantech_debounce_check_v2(struct psmouse *psmouse)
 790{
 791        /*
 792         * When we encounter packet that matches this exactly, it means the
 793         * hardware is in debounce status. Just ignore the whole packet.
 794         */
 795	static const u8 debounce_packet[] = {
 796		0x84, 0xff, 0xff, 0x02, 0xff, 0xff
 797	};
 798        unsigned char *packet = psmouse->packet;
 799
 800        return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
 801}
 802
 803static int elantech_packet_check_v2(struct psmouse *psmouse)
 804{
 805	struct elantech_data *etd = psmouse->private;
 806	unsigned char *packet = psmouse->packet;
 807
 808	/*
 809	 * V2 hardware has two flavors. Older ones that do not report pressure,
 810	 * and newer ones that reports pressure and width. With newer ones, all
 811	 * packets (1, 2, 3 finger touch) have the same constant bits. With
 812	 * older ones, 1/3 finger touch packets and 2 finger touch packets
 813	 * have different constant bits.
 814	 * With all three cases, if the constant bits are not exactly what I
 815	 * expected, I consider them invalid.
 816	 */
 817	if (etd->info.reports_pressure)
 818		return (packet[0] & 0x0c) == 0x04 &&
 819		       (packet[3] & 0x0f) == 0x02;
 820
 821	if ((packet[0] & 0xc0) == 0x80)
 822		return (packet[0] & 0x0c) == 0x0c &&
 823		       (packet[3] & 0x0e) == 0x08;
 824
 825	return (packet[0] & 0x3c) == 0x3c &&
 826	       (packet[1] & 0xf0) == 0x00 &&
 827	       (packet[3] & 0x3e) == 0x38 &&
 828	       (packet[4] & 0xf0) == 0x00;
 829}
 830
 831/*
 832 * We check the constant bits to determine what packet type we get,
 833 * so packet checking is mandatory for v3 and later hardware.
 834 */
 835static int elantech_packet_check_v3(struct psmouse *psmouse)
 836{
 837	struct elantech_data *etd = psmouse->private;
 838	static const u8 debounce_packet[] = {
 839		0xc4, 0xff, 0xff, 0x02, 0xff, 0xff
 840	};
 841	unsigned char *packet = psmouse->packet;
 842
 843	/*
 844	 * check debounce first, it has the same signature in byte 0
 845	 * and byte 3 as PACKET_V3_HEAD.
 846	 */
 847	if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
 848		return PACKET_DEBOUNCE;
 849
 850	/*
 851	 * If the hardware flag 'crc_enabled' is set the packets have
 852	 * different signatures.
 853	 */
 854	if (etd->info.crc_enabled) {
 855		if ((packet[3] & 0x09) == 0x08)
 856			return PACKET_V3_HEAD;
 857
 858		if ((packet[3] & 0x09) == 0x09)
 859			return PACKET_V3_TAIL;
 860	} else {
 861		if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
 862			return PACKET_V3_HEAD;
 863
 864		if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
 865			return PACKET_V3_TAIL;
 866		if ((packet[3] & 0x0f) == 0x06)
 867			return PACKET_TRACKPOINT;
 868	}
 869
 870	return PACKET_UNKNOWN;
 871}
 872
 873static int elantech_packet_check_v4(struct psmouse *psmouse)
 874{
 875	struct elantech_data *etd = psmouse->private;
 876	unsigned char *packet = psmouse->packet;
 877	unsigned char packet_type = packet[3] & 0x03;
 878	unsigned int ic_version;
 879	bool sanity_check;
 880
 881	if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
 882		return PACKET_TRACKPOINT;
 883
 884	/* This represents the version of IC body. */
 885	ic_version = (etd->info.fw_version & 0x0f0000) >> 16;
 886
 887	/*
 888	 * Sanity check based on the constant bits of a packet.
 889	 * The constant bits change depending on the value of
 890	 * the hardware flag 'crc_enabled' and the version of
 891	 * the IC body, but are the same for every packet,
 892	 * regardless of the type.
 893	 */
 894	if (etd->info.crc_enabled)
 895		sanity_check = ((packet[3] & 0x08) == 0x00);
 896	else if (ic_version == 7 && etd->info.samples[1] == 0x2A)
 897		sanity_check = ((packet[3] & 0x1c) == 0x10);
 898	else
 899		sanity_check = ((packet[0] & 0x08) == 0x00 &&
 900				(packet[3] & 0x1c) == 0x10);
 901
 902	if (!sanity_check)
 903		return PACKET_UNKNOWN;
 904
 905	switch (packet_type) {
 906	case 0:
 907		return PACKET_V4_STATUS;
 908
 909	case 1:
 910		return PACKET_V4_HEAD;
 911
 912	case 2:
 913		return PACKET_V4_MOTION;
 914	}
 915
 916	return PACKET_UNKNOWN;
 917}
 918
 919/*
 920 * Process byte stream from mouse and handle complete packets
 921 */
 922static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
 923{
 924	struct elantech_data *etd = psmouse->private;
 925	int packet_type;
 926
 927	if (psmouse->pktcnt < psmouse->pktsize)
 928		return PSMOUSE_GOOD_DATA;
 929
 930	if (etd->info.debug > 1)
 931		elantech_packet_dump(psmouse);
 932
 933	switch (etd->info.hw_version) {
 934	case 1:
 935		if (etd->info.paritycheck && !elantech_packet_check_v1(psmouse))
 936			return PSMOUSE_BAD_DATA;
 937
 938		elantech_report_absolute_v1(psmouse);
 939		break;
 940
 941	case 2:
 942		/* ignore debounce */
 943		if (elantech_debounce_check_v2(psmouse))
 944			return PSMOUSE_FULL_PACKET;
 945
 946		if (etd->info.paritycheck && !elantech_packet_check_v2(psmouse))
 947			return PSMOUSE_BAD_DATA;
 948
 949		elantech_report_absolute_v2(psmouse);
 950		break;
 951
 952	case 3:
 953		packet_type = elantech_packet_check_v3(psmouse);
 954		switch (packet_type) {
 955		case PACKET_UNKNOWN:
 956			return PSMOUSE_BAD_DATA;
 957
 958		case PACKET_DEBOUNCE:
 959			/* ignore debounce */
 960			break;
 961
 962		case PACKET_TRACKPOINT:
 963			elantech_report_trackpoint(psmouse, packet_type);
 964			break;
 965
 966		default:
 967			elantech_report_absolute_v3(psmouse, packet_type);
 968			break;
 969		}
 970
 971		break;
 972
 973	case 4:
 974		packet_type = elantech_packet_check_v4(psmouse);
 975		switch (packet_type) {
 976		case PACKET_UNKNOWN:
 977			return PSMOUSE_BAD_DATA;
 978
 979		case PACKET_TRACKPOINT:
 980			elantech_report_trackpoint(psmouse, packet_type);
 981			break;
 982
 983		default:
 984			elantech_report_absolute_v4(psmouse, packet_type);
 985			break;
 986		}
 987
 988		break;
 989	}
 990
 991	return PSMOUSE_FULL_PACKET;
 992}
 993
 994/*
 995 * This writes the reg_07 value again to the hardware at the end of every
 996 * set_rate call because the register loses its value. reg_07 allows setting
 997 * absolute mode on v4 hardware
 998 */
 999static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
1000		unsigned int rate)
1001{
1002	struct elantech_data *etd = psmouse->private;
1003
1004	etd->original_set_rate(psmouse, rate);
1005	if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
1006		psmouse_err(psmouse, "restoring reg_07 failed\n");
1007}
1008
1009/*
1010 * Put the touchpad into absolute mode
1011 */
1012static int elantech_set_absolute_mode(struct psmouse *psmouse)
1013{
1014	struct elantech_data *etd = psmouse->private;
1015	unsigned char val;
1016	int tries = ETP_READ_BACK_TRIES;
1017	int rc = 0;
1018
1019	switch (etd->info.hw_version) {
1020	case 1:
1021		etd->reg_10 = 0x16;
1022		etd->reg_11 = 0x8f;
1023		if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
1024		    elantech_write_reg(psmouse, 0x11, etd->reg_11)) {
1025			rc = -1;
1026		}
1027		break;
1028
1029	case 2:
1030					/* Windows driver values */
1031		etd->reg_10 = 0x54;
1032		etd->reg_11 = 0x88;	/* 0x8a */
1033		etd->reg_21 = 0x60;	/* 0x00 */
1034		if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
1035		    elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
1036		    elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
1037			rc = -1;
1038		}
1039		break;
1040
1041	case 3:
1042		if (etd->info.set_hw_resolution)
1043			etd->reg_10 = 0x0b;
1044		else
1045			etd->reg_10 = 0x01;
1046
1047		if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
1048			rc = -1;
1049
1050		break;
1051
1052	case 4:
1053		etd->reg_07 = 0x01;
1054		if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
1055			rc = -1;
1056
1057		goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */
1058	}
1059
1060	if (rc == 0) {
1061		/*
1062		 * Read back reg 0x10. For hardware version 1 we must make
1063		 * sure the absolute mode bit is set. For hardware version 2
1064		 * the touchpad is probably initializing and not ready until
1065		 * we read back the value we just wrote.
1066		 */
1067		do {
1068			rc = elantech_read_reg(psmouse, 0x10, &val);
1069			if (rc == 0)
1070				break;
1071			tries--;
1072			elantech_debug("retrying read (%d).\n", tries);
1073			msleep(ETP_READ_BACK_DELAY);
1074		} while (tries > 0);
1075
1076		if (rc) {
1077			psmouse_err(psmouse,
1078				    "failed to read back register 0x10.\n");
1079		} else if (etd->info.hw_version == 1 &&
1080			   !(val & ETP_R10_ABSOLUTE_MODE)) {
1081			psmouse_err(psmouse,
1082				    "touchpad refuses to switch to absolute mode.\n");
1083			rc = -1;
1084		}
1085	}
1086
1087 skip_readback_reg_10:
1088	if (rc)
1089		psmouse_err(psmouse, "failed to initialise registers.\n");
1090
1091	return rc;
1092}
1093
1094/*
1095 * (value from firmware) * 10 + 790 = dpi
1096 * we also have to convert dpi to dots/mm (*10/254 to avoid floating point)
1097 */
1098static unsigned int elantech_convert_res(unsigned int val)
1099{
1100	return (val * 10 + 790) * 10 / 254;
1101}
1102
1103static int elantech_get_resolution_v4(struct psmouse *psmouse,
1104				      unsigned int *x_res,
1105				      unsigned int *y_res,
1106				      unsigned int *bus)
1107{
1108	unsigned char param[3];
1109
1110	if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param))
1111		return -1;
1112
1113	*x_res = elantech_convert_res(param[1] & 0x0f);
1114	*y_res = elantech_convert_res((param[1] & 0xf0) >> 4);
1115	*bus = param[2];
1116
1117	return 0;
1118}
1119
1120static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
1121{
1122	struct input_dev *dev = psmouse->dev;
1123	struct elantech_data *etd = psmouse->private;
1124
1125	if (elantech_is_buttonpad(&etd->info)) {
1126		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
1127		__clear_bit(BTN_RIGHT, dev->keybit);
1128	}
1129}
1130
1131/*
1132 * Some hw_version 4 models do have a middle button
1133 */
1134static const struct dmi_system_id elantech_dmi_has_middle_button[] = {
1135#if defined(CONFIG_DMI) && defined(CONFIG_X86)
1136	{
1137		/* Fujitsu H730 has a middle button */
1138		.matches = {
1139			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1140			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
1141		},
1142	},
1143	{
1144		/* Fujitsu H760 also has a middle button */
1145		.matches = {
1146			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1147			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
1148		},
1149	},
1150	{
1151		/* Fujitsu H780 also has a middle button */
1152		.matches = {
1153			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1154			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H780"),
1155		},
1156	},
1157#endif
1158	{ }
1159};
1160
1161/*
1162 * Set the appropriate event bits for the input subsystem
1163 */
1164static int elantech_set_input_params(struct psmouse *psmouse)
1165{
1166	struct input_dev *dev = psmouse->dev;
1167	struct elantech_data *etd = psmouse->private;
1168	struct elantech_device_info *info = &etd->info;
1169	unsigned int x_min = info->x_min, y_min = info->y_min,
1170		     x_max = info->x_max, y_max = info->y_max,
1171		     width = info->width;
1172
1173	__set_bit(INPUT_PROP_POINTER, dev->propbit);
1174	__set_bit(EV_KEY, dev->evbit);
1175	__set_bit(EV_ABS, dev->evbit);
1176	__clear_bit(EV_REL, dev->evbit);
1177
1178	__set_bit(BTN_LEFT, dev->keybit);
1179	if (info->has_middle_button)
1180		__set_bit(BTN_MIDDLE, dev->keybit);
1181	__set_bit(BTN_RIGHT, dev->keybit);
1182
1183	__set_bit(BTN_TOUCH, dev->keybit);
1184	__set_bit(BTN_TOOL_FINGER, dev->keybit);
1185	__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
1186	__set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
1187
1188	switch (info->hw_version) {
1189	case 1:
1190		/* Rocker button */
1191		if (info->fw_version < 0x020000 &&
1192		    (info->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
1193			__set_bit(BTN_FORWARD, dev->keybit);
1194			__set_bit(BTN_BACK, dev->keybit);
1195		}
1196		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1197		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1198		break;
1199
1200	case 2:
1201		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
1202		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
1203		fallthrough;
1204	case 3:
1205		if (info->hw_version == 3)
1206			elantech_set_buttonpad_prop(psmouse);
1207		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1208		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1209		if (info->reports_pressure) {
1210			input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
1211					     ETP_PMAX_V2, 0, 0);
1212			input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
1213					     ETP_WMAX_V2, 0, 0);
1214		}
1215		input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT);
1216		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
1217		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
1218		break;
1219
1220	case 4:
1221		elantech_set_buttonpad_prop(psmouse);
1222		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
1223		/* For X to recognize me as touchpad. */
1224		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1225		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1226		/*
1227		 * range of pressure and width is the same as v2,
1228		 * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
1229		 */
1230		input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
1231				     ETP_PMAX_V2, 0, 0);
1232		input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
1233				     ETP_WMAX_V2, 0, 0);
1234		/* Multitouch capable pad, up to 5 fingers. */
1235		input_mt_init_slots(dev, ETP_MAX_FINGERS, 0);
1236		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
1237		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
1238		input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
1239				     ETP_PMAX_V2, 0, 0);
1240		/*
1241		 * The firmware reports how many trace lines the finger spans,
1242		 * convert to surface unit as Protocol-B requires.
1243		 */
1244		input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0,
1245				     ETP_WMAX_V2 * width, 0, 0);
1246		break;
1247	}
1248
1249	input_abs_set_res(dev, ABS_X, info->x_res);
1250	input_abs_set_res(dev, ABS_Y, info->y_res);
1251	if (info->hw_version > 1) {
1252		input_abs_set_res(dev, ABS_MT_POSITION_X, info->x_res);
1253		input_abs_set_res(dev, ABS_MT_POSITION_Y, info->y_res);
1254	}
1255
1256	etd->y_max = y_max;
1257	etd->width = width;
1258
1259	return 0;
1260}
1261
1262struct elantech_attr_data {
1263	size_t		field_offset;
1264	unsigned char	reg;
1265};
1266
1267/*
1268 * Display a register value by reading a sysfs entry
1269 */
1270static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data,
1271					char *buf)
1272{
1273	struct elantech_data *etd = psmouse->private;
1274	struct elantech_attr_data *attr = data;
1275	unsigned char *reg = (unsigned char *) etd + attr->field_offset;
1276	int rc = 0;
1277
1278	if (attr->reg)
1279		rc = elantech_read_reg(psmouse, attr->reg, reg);
1280
1281	return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg);
1282}
1283
1284/*
1285 * Write a register value by writing a sysfs entry
1286 */
1287static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
1288				     void *data, const char *buf, size_t count)
1289{
1290	struct elantech_data *etd = psmouse->private;
1291	struct elantech_attr_data *attr = data;
1292	unsigned char *reg = (unsigned char *) etd + attr->field_offset;
1293	unsigned char value;
1294	int err;
1295
1296	err = kstrtou8(buf, 16, &value);
1297	if (err)
1298		return err;
1299
1300	/* Do we need to preserve some bits for version 2 hardware too? */
1301	if (etd->info.hw_version == 1) {
1302		if (attr->reg == 0x10)
1303			/* Force absolute mode always on */
1304			value |= ETP_R10_ABSOLUTE_MODE;
1305		else if (attr->reg == 0x11)
1306			/* Force 4 byte mode always on */
1307			value |= ETP_R11_4_BYTE_MODE;
1308	}
1309
1310	if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0)
1311		*reg = value;
1312
1313	return count;
1314}
1315
1316#define ELANTECH_INT_ATTR(_name, _register)				\
1317	static struct elantech_attr_data elantech_attr_##_name = {	\
1318		.field_offset = offsetof(struct elantech_data, _name),	\
1319		.reg = _register,					\
1320	};								\
1321	PSMOUSE_DEFINE_ATTR(_name, 0644,				\
1322			    &elantech_attr_##_name,			\
1323			    elantech_show_int_attr,			\
1324			    elantech_set_int_attr)
1325
1326#define ELANTECH_INFO_ATTR(_name)					       \
1327	static struct elantech_attr_data elantech_attr_##_name = {	       \
1328		.field_offset = offsetof(struct elantech_data, info) +	       \
1329				offsetof(struct elantech_device_info, _name),  \
1330		.reg = 0,						       \
1331	};								       \
1332	PSMOUSE_DEFINE_ATTR(_name, 0644,				       \
1333			    &elantech_attr_##_name,			       \
1334			    elantech_show_int_attr,			       \
1335			    elantech_set_int_attr)
1336
1337ELANTECH_INT_ATTR(reg_07, 0x07);
1338ELANTECH_INT_ATTR(reg_10, 0x10);
1339ELANTECH_INT_ATTR(reg_11, 0x11);
1340ELANTECH_INT_ATTR(reg_20, 0x20);
1341ELANTECH_INT_ATTR(reg_21, 0x21);
1342ELANTECH_INT_ATTR(reg_22, 0x22);
1343ELANTECH_INT_ATTR(reg_23, 0x23);
1344ELANTECH_INT_ATTR(reg_24, 0x24);
1345ELANTECH_INT_ATTR(reg_25, 0x25);
1346ELANTECH_INT_ATTR(reg_26, 0x26);
1347ELANTECH_INFO_ATTR(debug);
1348ELANTECH_INFO_ATTR(paritycheck);
1349ELANTECH_INFO_ATTR(crc_enabled);
1350
1351static struct attribute *elantech_attrs[] = {
1352	&psmouse_attr_reg_07.dattr.attr,
1353	&psmouse_attr_reg_10.dattr.attr,
1354	&psmouse_attr_reg_11.dattr.attr,
1355	&psmouse_attr_reg_20.dattr.attr,
1356	&psmouse_attr_reg_21.dattr.attr,
1357	&psmouse_attr_reg_22.dattr.attr,
1358	&psmouse_attr_reg_23.dattr.attr,
1359	&psmouse_attr_reg_24.dattr.attr,
1360	&psmouse_attr_reg_25.dattr.attr,
1361	&psmouse_attr_reg_26.dattr.attr,
1362	&psmouse_attr_debug.dattr.attr,
1363	&psmouse_attr_paritycheck.dattr.attr,
1364	&psmouse_attr_crc_enabled.dattr.attr,
1365	NULL
1366};
1367
1368static const struct attribute_group elantech_attr_group = {
1369	.attrs = elantech_attrs,
1370};
1371
1372static bool elantech_is_signature_valid(const unsigned char *param)
1373{
1374	static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 };
1375	int i;
1376
1377	if (param[0] == 0)
1378		return false;
1379
1380	if (param[1] == 0)
1381		return true;
1382
1383	/*
1384	 * Some hw_version >= 4 models have a revision higher then 20. Meaning
1385	 * that param[2] may be 10 or 20, skip the rates check for these.
1386	 */
1387	if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f &&
1388	    param[2] < 40)
1389		return true;
1390
1391	for (i = 0; i < ARRAY_SIZE(rates); i++)
1392		if (param[2] == rates[i])
1393			return false;
1394
1395	return true;
1396}
1397
1398/*
1399 * Use magic knock to detect Elantech touchpad
1400 */
1401int elantech_detect(struct psmouse *psmouse, bool set_properties)
1402{
1403	struct ps2dev *ps2dev = &psmouse->ps2dev;
1404	unsigned char param[3];
1405
1406	ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
1407
1408	if (ps2_command(ps2dev,  NULL, PSMOUSE_CMD_DISABLE) ||
1409	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
1410	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
1411	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
1412	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
1413		psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n");
1414		return -1;
1415	}
1416
1417	/*
1418	 * Report this in case there are Elantech models that use a different
1419	 * set of magic numbers
1420	 */
1421	if (param[0] != 0x3c || param[1] != 0x03 ||
1422	    (param[2] != 0xc8 && param[2] != 0x00)) {
1423		psmouse_dbg(psmouse,
1424			    "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
1425			    param[0], param[1], param[2]);
1426		return -1;
1427	}
1428
1429	/*
1430	 * Query touchpad's firmware version and see if it reports known
1431	 * value to avoid mis-detection. Logitech mice are known to respond
1432	 * to Elantech magic knock and there might be more.
1433	 */
1434	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
1435		psmouse_dbg(psmouse, "failed to query firmware version.\n");
1436		return -1;
1437	}
1438
1439	psmouse_dbg(psmouse,
1440		    "Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
1441		    param[0], param[1], param[2]);
1442
1443	if (!elantech_is_signature_valid(param)) {
1444		psmouse_dbg(psmouse,
1445			    "Probably not a real Elantech touchpad. Aborting.\n");
1446		return -1;
1447	}
1448
1449	if (set_properties) {
1450		psmouse->vendor = "Elantech";
1451		psmouse->name = "Touchpad";
1452	}
1453
1454	return 0;
1455}
1456
1457/*
1458 * Clean up sysfs entries when disconnecting
1459 */
1460static void elantech_disconnect(struct psmouse *psmouse)
1461{
1462	struct elantech_data *etd = psmouse->private;
1463
1464	/*
1465	 * We might have left a breadcrumb when trying to
1466	 * set up SMbus companion.
1467	 */
1468	psmouse_smbus_cleanup(psmouse);
1469
1470	if (etd->tp_dev)
1471		input_unregister_device(etd->tp_dev);
1472	sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
1473			   &elantech_attr_group);
1474	kfree(psmouse->private);
1475	psmouse->private = NULL;
1476}
1477
1478/*
1479 * Put the touchpad back into absolute mode when reconnecting
1480 */
1481static int elantech_reconnect(struct psmouse *psmouse)
1482{
1483	psmouse_reset(psmouse);
1484
1485	if (elantech_detect(psmouse, 0))
1486		return -1;
1487
1488	if (elantech_set_absolute_mode(psmouse)) {
1489		psmouse_err(psmouse,
1490			    "failed to put touchpad back into absolute mode.\n");
1491		return -1;
1492	}
1493
1494	return 0;
1495}
1496
1497/*
1498 * Some hw_version 4 models do not work with crc_disabled
1499 */
1500static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
1501#if defined(CONFIG_DMI) && defined(CONFIG_X86)
1502	{
1503		/* Fujitsu H730 does not work with crc_enabled == 0 */
1504		.matches = {
1505			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1506			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
1507		},
1508	},
1509	{
1510		/* Fujitsu H760 does not work with crc_enabled == 0 */
1511		.matches = {
1512			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1513			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
1514		},
1515	},
1516	{
1517		/* Fujitsu LIFEBOOK E544  does not work with crc_enabled == 0 */
1518		.matches = {
1519			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1520			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"),
1521		},
1522	},
1523	{
1524		/* Fujitsu LIFEBOOK E546  does not work with crc_enabled == 0 */
1525		.matches = {
1526			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1527			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E546"),
1528		},
1529	},
1530	{
1531		/* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */
1532		.matches = {
1533			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1534			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E547"),
1535		},
1536	},
1537	{
1538		/* Fujitsu LIFEBOOK E554  does not work with crc_enabled == 0 */
1539		.matches = {
1540			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1541			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"),
1542		},
1543	},
1544	{
1545		/* Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0 */
1546		.matches = {
1547			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1548			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"),
1549		},
1550	},
1551	{
1552		/* Fujitsu LIFEBOOK E557 does not work with crc_enabled == 0 */
1553		.matches = {
1554			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1555			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E557"),
1556		},
1557	},
1558	{
1559		/* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */
1560		.matches = {
1561			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1562			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"),
1563		},
1564	},
1565#endif
1566	{ }
1567};
1568
1569/*
1570 * Some hw_version 3 models go into error state when we try to set
1571 * bit 3 and/or bit 1 of r10.
1572 */
1573static const struct dmi_system_id no_hw_res_dmi_table[] = {
1574#if defined(CONFIG_DMI) && defined(CONFIG_X86)
1575	{
1576		/* Gigabyte U2442 */
1577		.matches = {
1578			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
1579			DMI_MATCH(DMI_PRODUCT_NAME, "U2442"),
1580		},
1581	},
1582#endif
1583	{ }
1584};
1585
1586/*
1587 * Change Report id 0x5E to 0x5F.
1588 */
1589static int elantech_change_report_id(struct psmouse *psmouse)
1590{
1591	/*
1592	 * NOTE: the code is expecting to receive param[] as an array of 3
1593	 * items (see __ps2_command()), even if in this case only 2 are
1594	 * actually needed. Make sure the array size is 3 to avoid potential
1595	 * stack out-of-bound accesses.
1596	 */
1597	unsigned char param[3] = { 0x10, 0x03 };
1598
1599	if (elantech_write_reg_params(psmouse, 0x7, param) ||
1600	    elantech_read_reg_params(psmouse, 0x7, param) ||
1601	    param[0] != 0x10 || param[1] != 0x03) {
1602		psmouse_err(psmouse, "Unable to change report ID to 0x5f.\n");
1603		return -EIO;
1604	}
1605
1606	return 0;
1607}
1608/*
1609 * determine hardware version and set some properties according to it.
1610 */
1611static int elantech_set_properties(struct elantech_device_info *info)
1612{
1613	/* This represents the version of IC body. */
1614	info->ic_version = (info->fw_version & 0x0f0000) >> 16;
1615
1616	/* Early version of Elan touchpads doesn't obey the rule. */
1617	if (info->fw_version < 0x020030 || info->fw_version == 0x020600)
1618		info->hw_version = 1;
1619	else {
1620		switch (info->ic_version) {
1621		case 2:
1622		case 4:
1623			info->hw_version = 2;
1624			break;
1625		case 5:
1626			info->hw_version = 3;
1627			break;
1628		case 6 ... 15:
1629			info->hw_version = 4;
1630			break;
1631		default:
1632			return -1;
1633		}
1634	}
1635
1636	/* Get information pattern for hw_version 4 */
1637	info->pattern = 0x00;
1638	if (info->ic_version == 0x0f && (info->fw_version & 0xff) <= 0x02)
1639		info->pattern = info->fw_version & 0xff;
1640
1641	/* decide which send_cmd we're gonna use early */
1642	info->send_cmd = info->hw_version >= 3 ? elantech_send_cmd :
1643						 synaptics_send_cmd;
1644
1645	/* Turn on packet checking by default */
1646	info->paritycheck = 1;
1647
1648	/*
1649	 * This firmware suffers from misreporting coordinates when
1650	 * a touch action starts causing the mouse cursor or scrolled page
1651	 * to jump. Enable a workaround.
1652	 */
1653	info->jumpy_cursor =
1654		(info->fw_version == 0x020022 || info->fw_version == 0x020600);
1655
1656	if (info->hw_version > 1) {
1657		/* For now show extra debug information */
1658		info->debug = 1;
1659
1660		if (info->fw_version >= 0x020800)
1661			info->reports_pressure = true;
1662	}
1663
1664	/*
1665	 * The signatures of v3 and v4 packets change depending on the
1666	 * value of this hardware flag.
1667	 */
1668	info->crc_enabled = (info->fw_version & 0x4000) == 0x4000 ||
1669			     dmi_check_system(elantech_dmi_force_crc_enabled);
1670
1671	/* Enable real hardware resolution on hw_version 3 ? */
1672	info->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
1673
1674	return 0;
1675}
1676
1677static int elantech_query_info(struct psmouse *psmouse,
1678			       struct elantech_device_info *info)
1679{
1680	unsigned char param[3];
1681	unsigned char traces;
1682	unsigned char ic_body[3];
1683
1684	memset(info, 0, sizeof(*info));
1685
1686	/*
1687	 * Do the version query again so we can store the result
1688	 */
1689	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
1690		psmouse_err(psmouse, "failed to query firmware version.\n");
1691		return -EINVAL;
1692	}
1693	info->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
1694
1695	if (elantech_set_properties(info)) {
1696		psmouse_err(psmouse, "unknown hardware version, aborting...\n");
1697		return -EINVAL;
1698	}
1699	psmouse_info(psmouse,
1700		     "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n",
1701		     info->hw_version, param[0], param[1], param[2]);
1702
1703	if (info->send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
1704	    info->capabilities)) {
1705		psmouse_err(psmouse, "failed to query capabilities.\n");
1706		return -EINVAL;
1707	}
1708	psmouse_info(psmouse,
1709		     "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
1710		     info->capabilities[0], info->capabilities[1],
1711		     info->capabilities[2]);
1712
1713	if (info->hw_version != 1) {
1714		if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, info->samples)) {
1715			psmouse_err(psmouse, "failed to query sample data\n");
1716			return -EINVAL;
1717		}
1718		psmouse_info(psmouse,
1719			     "Elan sample query result %02x, %02x, %02x\n",
1720			     info->samples[0],
1721			     info->samples[1],
1722			     info->samples[2]);
1723	}
1724
1725	if (info->pattern > 0x00 && info->ic_version == 0xf) {
1726		if (info->send_cmd(psmouse, ETP_ICBODY_QUERY, ic_body)) {
1727			psmouse_err(psmouse, "failed to query ic body\n");
1728			return -EINVAL;
1729		}
1730		info->ic_version = be16_to_cpup((__be16 *)ic_body);
1731		psmouse_info(psmouse,
1732			     "Elan ic body: %#04x, current fw version: %#02x\n",
1733			     info->ic_version, ic_body[2]);
1734	}
1735
1736	info->product_id = be16_to_cpup((__be16 *)info->samples);
1737	if (info->pattern == 0x00)
1738		info->product_id &= 0xff;
1739
1740	if (info->samples[1] == 0x74 && info->hw_version == 0x03) {
1741		/*
1742		 * This module has a bug which makes absolute mode
1743		 * unusable, so let's abort so we'll be using standard
1744		 * PS/2 protocol.
1745		 */
1746		psmouse_info(psmouse,
1747			     "absolute mode broken, forcing standard PS/2 protocol\n");
1748		return -ENODEV;
1749	}
1750
1751	/* The MSB indicates the presence of the trackpoint */
1752	info->has_trackpoint = (info->capabilities[0] & 0x80) == 0x80;
1753
1754	if (info->has_trackpoint && info->ic_version == 0x0011 &&
1755	    (info->product_id == 0x08 || info->product_id == 0x09 ||
1756	     info->product_id == 0x0d || info->product_id == 0x0e)) {
1757		/*
1758		 * This module has a bug which makes trackpoint in SMBus
1759		 * mode return invalid data unless trackpoint is switched
1760		 * from using 0x5e reports to 0x5f. If we are not able to
1761		 * make the switch, let's abort initialization so we'll be
1762		 * using standard PS/2 protocol.
1763		 */
1764		if (elantech_change_report_id(psmouse)) {
1765			psmouse_info(psmouse,
1766				     "Trackpoint report is broken, forcing standard PS/2 protocol\n");
1767			return -ENODEV;
1768		}
1769	}
1770
1771	info->x_res = 31;
1772	info->y_res = 31;
1773	if (info->hw_version == 4) {
1774		if (elantech_get_resolution_v4(psmouse,
1775					       &info->x_res,
1776					       &info->y_res,
1777					       &info->bus)) {
1778			psmouse_warn(psmouse,
1779				     "failed to query resolution data.\n");
1780		}
1781	}
1782
1783	/* query range information */
1784	switch (info->hw_version) {
1785	case 1:
1786		info->x_min = ETP_XMIN_V1;
1787		info->y_min = ETP_YMIN_V1;
1788		info->x_max = ETP_XMAX_V1;
1789		info->y_max = ETP_YMAX_V1;
1790		break;
1791
1792	case 2:
1793		if (info->fw_version == 0x020800 ||
1794		    info->fw_version == 0x020b00 ||
1795		    info->fw_version == 0x020030) {
1796			info->x_min = ETP_XMIN_V2;
1797			info->y_min = ETP_YMIN_V2;
1798			info->x_max = ETP_XMAX_V2;
1799			info->y_max = ETP_YMAX_V2;
1800		} else {
1801			int i;
1802			int fixed_dpi;
1803
1804			i = (info->fw_version > 0x020800 &&
1805			     info->fw_version < 0x020900) ? 1 : 2;
1806
1807			if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1808				return -EINVAL;
1809
1810			fixed_dpi = param[1] & 0x10;
1811
1812			if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
1813				if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
1814					return -EINVAL;
1815
1816				info->x_max = (info->capabilities[1] - i) * param[1] / 2;
1817				info->y_max = (info->capabilities[2] - i) * param[2] / 2;
1818			} else if (info->fw_version == 0x040216) {
1819				info->x_max = 819;
1820				info->y_max = 405;
1821			} else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
1822				info->x_max = 900;
1823				info->y_max = 500;
1824			} else {
1825				info->x_max = (info->capabilities[1] - i) * 64;
1826				info->y_max = (info->capabilities[2] - i) * 64;
1827			}
1828		}
1829		break;
1830
1831	case 3:
1832		if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1833			return -EINVAL;
1834
1835		info->x_max = (0x0f & param[0]) << 8 | param[1];
1836		info->y_max = (0xf0 & param[0]) << 4 | param[2];
1837		break;
1838
1839	case 4:
1840		if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1841			return -EINVAL;
1842
1843		info->x_max = (0x0f & param[0]) << 8 | param[1];
1844		info->y_max = (0xf0 & param[0]) << 4 | param[2];
1845		traces = info->capabilities[1];
1846		if ((traces < 2) || (traces > info->x_max))
1847			return -EINVAL;
1848
1849		info->width = info->x_max / (traces - 1);
1850
1851		/* column number of traces */
1852		info->x_traces = traces;
1853
1854		/* row number of traces */
1855		traces = info->capabilities[2];
1856		if ((traces >= 2) && (traces <= info->y_max))
1857			info->y_traces = traces;
1858
1859		break;
1860	}
1861
1862	/* check for the middle button: DMI matching or new v4 firmwares */
1863	info->has_middle_button = dmi_check_system(elantech_dmi_has_middle_button) ||
1864				  (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) &&
1865				   !elantech_is_buttonpad(info));
1866
1867	return 0;
1868}
1869
1870#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
1871
1872/*
1873 * The newest Elantech device can use a secondary bus (over SMBus) which
1874 * provides a better bandwidth and allow a better control of the touchpads.
1875 * This is used to decide if we need to use this bus or not.
1876 */
1877enum {
1878	ELANTECH_SMBUS_NOT_SET = -1,
1879	ELANTECH_SMBUS_OFF,
1880	ELANTECH_SMBUS_ON,
1881};
1882
1883static int elantech_smbus = IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ?
1884		ELANTECH_SMBUS_NOT_SET : ELANTECH_SMBUS_OFF;
1885module_param_named(elantech_smbus, elantech_smbus, int, 0644);
1886MODULE_PARM_DESC(elantech_smbus, "Use a secondary bus for the Elantech device.");
1887
1888static const char * const i2c_blacklist_pnp_ids[] = {
1889	/*
1890	 * These are known to not be working properly as bits are missing
1891	 * in elan_i2c.
1892	 */
1893	NULL
1894};
1895
1896static int elantech_create_smbus(struct psmouse *psmouse,
1897				 struct elantech_device_info *info,
1898				 bool leave_breadcrumbs)
1899{
1900	struct property_entry i2c_props[11] = {};
1901	struct i2c_board_info smbus_board = {
1902		I2C_BOARD_INFO("elan_i2c", 0x15),
1903		.flags = I2C_CLIENT_HOST_NOTIFY,
1904	};
1905	unsigned int idx = 0;
1906
 
 
1907	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-x",
1908						   info->x_max + 1);
1909	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-y",
1910						   info->y_max + 1);
1911	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-x",
1912						   info->x_min);
1913	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-y",
1914						   info->y_min);
1915	if (info->x_res)
1916		i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-x-mm",
1917						      (info->x_max + 1) / info->x_res);
1918	if (info->y_res)
1919		i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-y-mm",
1920						      (info->y_max + 1) / info->y_res);
1921
1922	if (info->has_trackpoint)
1923		i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,trackpoint");
1924
1925	if (info->has_middle_button)
1926		i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,middle-button");
1927
1928	if (info->x_traces)
1929		i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,x_traces",
1930						      info->x_traces);
1931	if (info->y_traces)
1932		i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,y_traces",
1933						      info->y_traces);
1934
1935	if (elantech_is_buttonpad(info))
1936		i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,clickpad");
1937
1938	smbus_board.fwnode = fwnode_create_software_node(i2c_props, NULL);
1939	if (IS_ERR(smbus_board.fwnode))
1940		return PTR_ERR(smbus_board.fwnode);
1941
1942	return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false,
1943				  leave_breadcrumbs);
1944}
1945
1946/*
1947 * elantech_setup_smbus - called once the PS/2 devices are enumerated
1948 * and decides to instantiate a SMBus InterTouch device.
1949 */
1950static int elantech_setup_smbus(struct psmouse *psmouse,
1951				struct elantech_device_info *info,
1952				bool leave_breadcrumbs)
1953{
1954	int error;
1955
1956	if (elantech_smbus == ELANTECH_SMBUS_OFF)
1957		return -ENXIO;
1958
1959	if (elantech_smbus == ELANTECH_SMBUS_NOT_SET) {
1960		/*
1961		 * New ICs are enabled by default, unless mentioned in
1962		 * i2c_blacklist_pnp_ids.
1963		 * Old ICs are up to the user to decide.
1964		 */
1965		if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
1966		    psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
1967			return -ENXIO;
1968	}
1969
1970	psmouse_info(psmouse, "Trying to set up SMBus access\n");
1971
1972	error = elantech_create_smbus(psmouse, info, leave_breadcrumbs);
1973	if (error) {
1974		if (error == -EAGAIN)
1975			psmouse_info(psmouse, "SMbus companion is not ready yet\n");
1976		else
1977			psmouse_err(psmouse, "unable to create intertouch device\n");
1978
1979		return error;
1980	}
1981
1982	return 0;
1983}
1984
1985static bool elantech_use_host_notify(struct psmouse *psmouse,
1986				     struct elantech_device_info *info)
1987{
1988	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
1989		return true;
1990
1991	switch (info->bus) {
1992	case ETP_BUS_PS2_ONLY:
1993		/* expected case */
1994		break;
1995	case ETP_BUS_SMB_ALERT_ONLY:
 
1996	case ETP_BUS_PS2_SMB_ALERT:
1997		psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n");
1998		break;
1999	case ETP_BUS_SMB_HST_NTFY_ONLY:
 
2000	case ETP_BUS_PS2_SMB_HST_NTFY:
2001		return true;
2002	default:
2003		psmouse_dbg(psmouse,
2004			    "Ignoring SMBus bus provider %d.\n",
2005			    info->bus);
2006	}
2007
2008	return false;
2009}
2010
2011int elantech_init_smbus(struct psmouse *psmouse)
2012{
2013	struct elantech_device_info info;
2014	int error;
2015
2016	psmouse_reset(psmouse);
2017
2018	error = elantech_query_info(psmouse, &info);
2019	if (error)
2020		goto init_fail;
2021
2022	if (info.hw_version < 4) {
2023		error = -ENXIO;
2024		goto init_fail;
2025	}
2026
2027	return elantech_create_smbus(psmouse, &info, false);
2028 init_fail:
2029	psmouse_reset(psmouse);
2030	return error;
2031}
2032#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
2033
2034/*
2035 * Initialize the touchpad and create sysfs entries
2036 */
2037static int elantech_setup_ps2(struct psmouse *psmouse,
2038			      struct elantech_device_info *info)
2039{
2040	struct elantech_data *etd;
2041	int i;
2042	int error = -EINVAL;
2043	struct input_dev *tp_dev;
2044
2045	psmouse->private = etd = kzalloc(sizeof(*etd), GFP_KERNEL);
2046	if (!etd)
2047		return -ENOMEM;
2048
2049	etd->info = *info;
2050
2051	etd->parity[0] = 1;
2052	for (i = 1; i < 256; i++)
2053		etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
2054
2055	if (elantech_set_absolute_mode(psmouse)) {
2056		psmouse_err(psmouse,
2057			    "failed to put touchpad into absolute mode.\n");
2058		goto init_fail;
2059	}
2060
2061	if (info->fw_version == 0x381f17) {
2062		etd->original_set_rate = psmouse->set_rate;
2063		psmouse->set_rate = elantech_set_rate_restore_reg_07;
2064	}
2065
2066	if (elantech_set_input_params(psmouse)) {
2067		psmouse_err(psmouse, "failed to query touchpad range.\n");
2068		goto init_fail;
2069	}
2070
2071	error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
2072				   &elantech_attr_group);
2073	if (error) {
2074		psmouse_err(psmouse,
2075			    "failed to create sysfs attributes, error: %d.\n",
2076			    error);
2077		goto init_fail;
2078	}
2079
2080	if (info->has_trackpoint) {
2081		tp_dev = input_allocate_device();
2082
2083		if (!tp_dev) {
2084			error = -ENOMEM;
2085			goto init_fail_tp_alloc;
2086		}
2087
2088		etd->tp_dev = tp_dev;
2089		snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1",
2090			psmouse->ps2dev.serio->phys);
2091		tp_dev->phys = etd->tp_phys;
2092		tp_dev->name = "ETPS/2 Elantech TrackPoint";
2093		tp_dev->id.bustype = BUS_I8042;
2094		tp_dev->id.vendor  = 0x0002;
2095		tp_dev->id.product = PSMOUSE_ELANTECH;
2096		tp_dev->id.version = 0x0000;
2097		tp_dev->dev.parent = &psmouse->ps2dev.serio->dev;
2098		tp_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
2099		tp_dev->relbit[BIT_WORD(REL_X)] =
2100			BIT_MASK(REL_X) | BIT_MASK(REL_Y);
2101		tp_dev->keybit[BIT_WORD(BTN_LEFT)] =
2102			BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) |
2103			BIT_MASK(BTN_RIGHT);
2104
2105		__set_bit(INPUT_PROP_POINTER, tp_dev->propbit);
2106		__set_bit(INPUT_PROP_POINTING_STICK, tp_dev->propbit);
2107
2108		error = input_register_device(etd->tp_dev);
2109		if (error < 0)
2110			goto init_fail_tp_reg;
2111	}
2112
2113	psmouse->protocol_handler = elantech_process_byte;
2114	psmouse->disconnect = elantech_disconnect;
2115	psmouse->reconnect = elantech_reconnect;
2116	psmouse->pktsize = info->hw_version > 1 ? 6 : 4;
2117
2118	return 0;
2119 init_fail_tp_reg:
2120	input_free_device(tp_dev);
2121 init_fail_tp_alloc:
2122	sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
2123			   &elantech_attr_group);
2124 init_fail:
2125	kfree(etd);
2126	return error;
2127}
2128
2129int elantech_init_ps2(struct psmouse *psmouse)
2130{
2131	struct elantech_device_info info;
2132	int error;
2133
2134	psmouse_reset(psmouse);
2135
2136	error = elantech_query_info(psmouse, &info);
2137	if (error)
2138		goto init_fail;
2139
2140	error = elantech_setup_ps2(psmouse, &info);
2141	if (error)
2142		goto init_fail;
2143
2144	return 0;
2145 init_fail:
2146	psmouse_reset(psmouse);
2147	return error;
2148}
2149
2150int elantech_init(struct psmouse *psmouse)
2151{
2152	struct elantech_device_info info;
2153	int error;
2154
2155	psmouse_reset(psmouse);
2156
2157	error = elantech_query_info(psmouse, &info);
2158	if (error)
2159		goto init_fail;
2160
2161#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
2162
2163	if (elantech_use_host_notify(psmouse, &info)) {
2164		if (!IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ||
2165		    !IS_ENABLED(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)) {
2166			psmouse_warn(psmouse,
2167				     "The touchpad can support a better bus than the too old PS/2 protocol. "
2168				     "Make sure MOUSE_PS2_ELANTECH_SMBUS and MOUSE_ELAN_I2C_SMBUS are enabled to get a better touchpad experience.\n");
2169		}
2170		error = elantech_setup_smbus(psmouse, &info, true);
2171		if (!error)
2172			return PSMOUSE_ELANTECH_SMBUS;
2173	}
2174
2175#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
2176
2177	error = elantech_setup_ps2(psmouse, &info);
2178	if (error < 0) {
2179		/*
2180		 * Not using any flavor of Elantech support, so clean up
2181		 * SMbus breadcrumbs, if any.
2182		 */
2183		psmouse_smbus_cleanup(psmouse);
2184		goto init_fail;
2185	}
2186
2187	return PSMOUSE_ELANTECH;
2188 init_fail:
2189	psmouse_reset(psmouse);
2190	return error;
2191}
v5.4
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Elantech Touchpad driver (v6)
   4 *
   5 * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
   6 *
   7 * Trademarks are the property of their respective owners.
   8 */
   9
  10#include <linux/delay.h>
  11#include <linux/dmi.h>
  12#include <linux/slab.h>
  13#include <linux/module.h>
  14#include <linux/i2c.h>
  15#include <linux/input.h>
  16#include <linux/input/mt.h>
  17#include <linux/platform_device.h>
  18#include <linux/serio.h>
  19#include <linux/libps2.h>
  20#include <asm/unaligned.h>
  21#include "psmouse.h"
  22#include "elantech.h"
  23#include "elan_i2c.h"
  24
  25#define elantech_debug(fmt, ...)					\
  26	do {								\
  27		if (etd->info.debug)					\
  28			psmouse_printk(KERN_DEBUG, psmouse,		\
  29					fmt, ##__VA_ARGS__);		\
  30	} while (0)
  31
  32/*
  33 * Send a Synaptics style sliced query command
  34 */
  35static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
  36				unsigned char *param)
  37{
  38	if (ps2_sliced_command(&psmouse->ps2dev, c) ||
  39	    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
  40		psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
  41		return -1;
  42	}
  43
  44	return 0;
  45}
  46
  47/*
  48 * V3 and later support this fast command
  49 */
  50static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c,
  51				unsigned char *param)
  52{
  53	struct ps2dev *ps2dev = &psmouse->ps2dev;
  54
  55	if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) ||
  56	    ps2_command(ps2dev, NULL, c) ||
  57	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
  58		psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
  59		return -1;
  60	}
  61
  62	return 0;
  63}
  64
  65/*
  66 * A retrying version of ps2_command
  67 */
  68static int elantech_ps2_command(struct psmouse *psmouse,
  69				unsigned char *param, int command)
  70{
  71	struct ps2dev *ps2dev = &psmouse->ps2dev;
  72	struct elantech_data *etd = psmouse->private;
  73	int rc;
  74	int tries = ETP_PS2_COMMAND_TRIES;
  75
  76	do {
  77		rc = ps2_command(ps2dev, param, command);
  78		if (rc == 0)
  79			break;
  80		tries--;
  81		elantech_debug("retrying ps2 command 0x%02x (%d).\n",
  82				command, tries);
  83		msleep(ETP_PS2_COMMAND_DELAY);
  84	} while (tries > 0);
  85
  86	if (rc)
  87		psmouse_err(psmouse, "ps2 command 0x%02x failed.\n", command);
  88
  89	return rc;
  90}
  91
  92/*
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  93 * Send an Elantech style special command to read a value from a register
  94 */
  95static int elantech_read_reg(struct psmouse *psmouse, unsigned char reg,
  96				unsigned char *val)
  97{
  98	struct elantech_data *etd = psmouse->private;
  99	unsigned char param[3];
 100	int rc = 0;
 101
 102	if (reg < 0x07 || reg > 0x26)
 103		return -1;
 104
 105	if (reg > 0x11 && reg < 0x20)
 106		return -1;
 107
 108	switch (etd->info.hw_version) {
 109	case 1:
 110		if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_READ) ||
 111		    ps2_sliced_command(&psmouse->ps2dev, reg) ||
 112		    ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETINFO)) {
 113			rc = -1;
 114		}
 115		break;
 116
 117	case 2:
 118		if (elantech_ps2_command(psmouse,  NULL, ETP_PS2_CUSTOM_COMMAND) ||
 119		    elantech_ps2_command(psmouse,  NULL, ETP_REGISTER_READ) ||
 120		    elantech_ps2_command(psmouse,  NULL, ETP_PS2_CUSTOM_COMMAND) ||
 121		    elantech_ps2_command(psmouse,  NULL, reg) ||
 122		    elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
 123			rc = -1;
 124		}
 125		break;
 126
 127	case 3 ... 4:
 128		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 129		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 130		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 131		    elantech_ps2_command(psmouse, NULL, reg) ||
 132		    elantech_ps2_command(psmouse, param, PSMOUSE_CMD_GETINFO)) {
 133			rc = -1;
 134		}
 135		break;
 136	}
 137
 138	if (rc)
 139		psmouse_err(psmouse, "failed to read register 0x%02x.\n", reg);
 140	else if (etd->info.hw_version != 4)
 141		*val = param[0];
 142	else
 143		*val = param[1];
 144
 145	return rc;
 146}
 147
 148/*
 149 * Send an Elantech style special command to write a register with a value
 150 */
 151static int elantech_write_reg(struct psmouse *psmouse, unsigned char reg,
 152				unsigned char val)
 153{
 154	struct elantech_data *etd = psmouse->private;
 155	int rc = 0;
 156
 157	if (reg < 0x07 || reg > 0x26)
 158		return -1;
 159
 160	if (reg > 0x11 && reg < 0x20)
 161		return -1;
 162
 163	switch (etd->info.hw_version) {
 164	case 1:
 165		if (ps2_sliced_command(&psmouse->ps2dev, ETP_REGISTER_WRITE) ||
 166		    ps2_sliced_command(&psmouse->ps2dev, reg) ||
 167		    ps2_sliced_command(&psmouse->ps2dev, val) ||
 168		    ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11)) {
 169			rc = -1;
 170		}
 171		break;
 172
 173	case 2:
 174		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 175		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_WRITE) ||
 176		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 177		    elantech_ps2_command(psmouse, NULL, reg) ||
 178		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 179		    elantech_ps2_command(psmouse, NULL, val) ||
 180		    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
 181			rc = -1;
 182		}
 183		break;
 184
 185	case 3:
 186		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 187		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 188		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 189		    elantech_ps2_command(psmouse, NULL, reg) ||
 190		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 191		    elantech_ps2_command(psmouse, NULL, val) ||
 192		    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
 193			rc = -1;
 194		}
 195		break;
 196
 197	case 4:
 198		if (elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 199		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 200		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 201		    elantech_ps2_command(psmouse, NULL, reg) ||
 202		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 203		    elantech_ps2_command(psmouse, NULL, ETP_REGISTER_READWRITE) ||
 204		    elantech_ps2_command(psmouse, NULL, ETP_PS2_CUSTOM_COMMAND) ||
 205		    elantech_ps2_command(psmouse, NULL, val) ||
 206		    elantech_ps2_command(psmouse, NULL, PSMOUSE_CMD_SETSCALE11)) {
 207			rc = -1;
 208		}
 209		break;
 210	}
 211
 212	if (rc)
 213		psmouse_err(psmouse,
 214			    "failed to write register 0x%02x with value 0x%02x.\n",
 215			    reg, val);
 216
 217	return rc;
 218}
 219
 220/*
 221 * Dump a complete mouse movement packet to the syslog
 222 */
 223static void elantech_packet_dump(struct psmouse *psmouse)
 224{
 225	psmouse_printk(KERN_DEBUG, psmouse, "PS/2 packet [%*ph]\n",
 226		       psmouse->pktsize, psmouse->packet);
 227}
 228
 229/*
 230 * Advertise INPUT_PROP_BUTTONPAD for clickpads. The testing of bit 12 in
 231 * fw_version for this is based on the following fw_version & caps table:
 232 *
 233 * Laptop-model:           fw_version:     caps:           buttons:
 234 * Acer S3                 0x461f00        10, 13, 0e      clickpad
 235 * Acer S7-392             0x581f01        50, 17, 0d      clickpad
 236 * Acer V5-131             0x461f02        01, 16, 0c      clickpad
 237 * Acer V5-551             0x461f00        ?               clickpad
 238 * Asus K53SV              0x450f01        78, 15, 0c      2 hw buttons
 239 * Asus G46VW              0x460f02        00, 18, 0c      2 hw buttons
 240 * Asus G750JX             0x360f00        00, 16, 0c      2 hw buttons
 241 * Asus TP500LN            0x381f17        10, 14, 0e      clickpad
 242 * Asus X750JN             0x381f17        10, 14, 0e      clickpad
 243 * Asus UX31               0x361f00        20, 15, 0e      clickpad
 244 * Asus UX32VD             0x361f02        00, 15, 0e      clickpad
 245 * Avatar AVIU-145A2       0x361f00        ?               clickpad
 246 * Fujitsu CELSIUS H760    0x570f02        40, 14, 0c      3 hw buttons (**)
 247 * Fujitsu CELSIUS H780    0x5d0f02        41, 16, 0d      3 hw buttons (**)
 248 * Fujitsu LIFEBOOK E544   0x470f00        d0, 12, 09      2 hw buttons
 249 * Fujitsu LIFEBOOK E546   0x470f00        50, 12, 09      2 hw buttons
 250 * Fujitsu LIFEBOOK E547   0x470f00        50, 12, 09      2 hw buttons
 251 * Fujitsu LIFEBOOK E554   0x570f01        40, 14, 0c      2 hw buttons
 252 * Fujitsu LIFEBOOK E557   0x570f01        40, 14, 0c      2 hw buttons
 253 * Fujitsu T725            0x470f01        05, 12, 09      2 hw buttons
 254 * Fujitsu H730            0x570f00        c0, 14, 0c      3 hw buttons (**)
 255 * Gigabyte U2442          0x450f01        58, 17, 0c      2 hw buttons
 256 * Lenovo L430             0x350f02        b9, 15, 0c      2 hw buttons (*)
 257 * Lenovo L530             0x350f02        b9, 15, 0c      2 hw buttons (*)
 258 * Samsung NF210           0x150b00        78, 14, 0a      2 hw buttons
 259 * Samsung NP770Z5E        0x575f01        10, 15, 0f      clickpad
 260 * Samsung NP700Z5B        0x361f06        21, 15, 0f      clickpad
 261 * Samsung NP900X3E-A02    0x575f03        ?               clickpad
 262 * Samsung NP-QX410        0x851b00        19, 14, 0c      clickpad
 263 * Samsung RC512           0x450f00        08, 15, 0c      2 hw buttons
 264 * Samsung RF710           0x450f00        ?               2 hw buttons
 265 * System76 Pangolin       0x250f01        ?               2 hw buttons
 266 * (*) + 3 trackpoint buttons
 267 * (**) + 0 trackpoint buttons
 268 * Note: Lenovo L430 and Lenovo L530 have the same fw_version/caps
 269 */
 270static inline int elantech_is_buttonpad(struct elantech_device_info *info)
 271{
 272	return info->fw_version & 0x001000;
 273}
 274
 275/*
 276 * Interpret complete data packets and report absolute mode input events for
 277 * hardware version 1. (4 byte packets)
 278 */
 279static void elantech_report_absolute_v1(struct psmouse *psmouse)
 280{
 281	struct input_dev *dev = psmouse->dev;
 282	struct elantech_data *etd = psmouse->private;
 283	unsigned char *packet = psmouse->packet;
 284	int fingers;
 285
 286	if (etd->info.fw_version < 0x020000) {
 287		/*
 288		 * byte 0:  D   U  p1  p2   1  p3   R   L
 289		 * byte 1:  f   0  th  tw  x9  x8  y9  y8
 290		 */
 291		fingers = ((packet[1] & 0x80) >> 7) +
 292				((packet[1] & 0x30) >> 4);
 293	} else {
 294		/*
 295		 * byte 0: n1  n0  p2  p1   1  p3   R   L
 296		 * byte 1:  0   0   0   0  x9  x8  y9  y8
 297		 */
 298		fingers = (packet[0] & 0xc0) >> 6;
 299	}
 300
 301	if (etd->info.jumpy_cursor) {
 302		if (fingers != 1) {
 303			etd->single_finger_reports = 0;
 304		} else if (etd->single_finger_reports < 2) {
 305			/* Discard first 2 reports of one finger, bogus */
 306			etd->single_finger_reports++;
 307			elantech_debug("discarding packet\n");
 308			return;
 309		}
 310	}
 311
 312	input_report_key(dev, BTN_TOUCH, fingers != 0);
 313
 314	/*
 315	 * byte 2: x7  x6  x5  x4  x3  x2  x1  x0
 316	 * byte 3: y7  y6  y5  y4  y3  y2  y1  y0
 317	 */
 318	if (fingers) {
 319		input_report_abs(dev, ABS_X,
 320			((packet[1] & 0x0c) << 6) | packet[2]);
 321		input_report_abs(dev, ABS_Y,
 322			etd->y_max - (((packet[1] & 0x03) << 8) | packet[3]));
 323	}
 324
 325	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 326	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 327	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 328
 329	psmouse_report_standard_buttons(dev, packet[0]);
 330
 331	if (etd->info.fw_version < 0x020000 &&
 332	    (etd->info.capabilities[0] & ETP_CAP_HAS_ROCKER)) {
 333		/* rocker up */
 334		input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);
 335		/* rocker down */
 336		input_report_key(dev, BTN_BACK, packet[0] & 0x80);
 337	}
 338
 339	input_sync(dev);
 340}
 341
 342static void elantech_set_slot(struct input_dev *dev, int slot, bool active,
 343			      unsigned int x, unsigned int y)
 344{
 345	input_mt_slot(dev, slot);
 346	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
 347	if (active) {
 348		input_report_abs(dev, ABS_MT_POSITION_X, x);
 349		input_report_abs(dev, ABS_MT_POSITION_Y, y);
 350	}
 351}
 352
 353/* x1 < x2 and y1 < y2 when two fingers, x = y = 0 when not pressed */
 354static void elantech_report_semi_mt_data(struct input_dev *dev,
 355					 unsigned int num_fingers,
 356					 unsigned int x1, unsigned int y1,
 357					 unsigned int x2, unsigned int y2)
 358{
 359	elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
 360	elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2);
 361}
 362
 363/*
 364 * Interpret complete data packets and report absolute mode input events for
 365 * hardware version 2. (6 byte packets)
 366 */
 367static void elantech_report_absolute_v2(struct psmouse *psmouse)
 368{
 369	struct elantech_data *etd = psmouse->private;
 370	struct input_dev *dev = psmouse->dev;
 371	unsigned char *packet = psmouse->packet;
 372	unsigned int fingers, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
 373	unsigned int width = 0, pres = 0;
 374
 375	/* byte 0: n1  n0   .   .   .   .   R   L */
 376	fingers = (packet[0] & 0xc0) >> 6;
 377
 378	switch (fingers) {
 379	case 3:
 380		/*
 381		 * Same as one finger, except report of more than 3 fingers:
 382		 * byte 3:  n4  .   w1  w0   .   .   .   .
 383		 */
 384		if (packet[3] & 0x80)
 385			fingers = 4;
 386		/* fall through */
 387	case 1:
 388		/*
 389		 * byte 1:  .   .   .   .  x11 x10 x9  x8
 390		 * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
 391		 */
 392		x1 = ((packet[1] & 0x0f) << 8) | packet[2];
 393		/*
 394		 * byte 4:  .   .   .   .  y11 y10 y9  y8
 395		 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
 396		 */
 397		y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 398
 399		pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
 400		width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
 401		break;
 402
 403	case 2:
 404		/*
 405		 * The coordinate of each finger is reported separately
 406		 * with a lower resolution for two finger touches:
 407		 * byte 0:  .   .  ay8 ax8  .   .   .   .
 408		 * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
 409		 */
 410		x1 = (((packet[0] & 0x10) << 4) | packet[1]) << 2;
 411		/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
 412		y1 = etd->y_max -
 413			((((packet[0] & 0x20) << 3) | packet[2]) << 2);
 414		/*
 415		 * byte 3:  .   .  by8 bx8  .   .   .   .
 416		 * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
 417		 */
 418		x2 = (((packet[3] & 0x10) << 4) | packet[4]) << 2;
 419		/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
 420		y2 = etd->y_max -
 421			((((packet[3] & 0x20) << 3) | packet[5]) << 2);
 422
 423		/* Unknown so just report sensible values */
 424		pres = 127;
 425		width = 7;
 426		break;
 427	}
 428
 429	input_report_key(dev, BTN_TOUCH, fingers != 0);
 430	if (fingers != 0) {
 431		input_report_abs(dev, ABS_X, x1);
 432		input_report_abs(dev, ABS_Y, y1);
 433	}
 434	elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
 435	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 436	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 437	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 438	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
 439	psmouse_report_standard_buttons(dev, packet[0]);
 440	if (etd->info.reports_pressure) {
 441		input_report_abs(dev, ABS_PRESSURE, pres);
 442		input_report_abs(dev, ABS_TOOL_WIDTH, width);
 443	}
 444
 445	input_sync(dev);
 446}
 447
 448static void elantech_report_trackpoint(struct psmouse *psmouse,
 449				       int packet_type)
 450{
 451	/*
 452	 * byte 0:  0   0  sx  sy   0   M   R   L
 453	 * byte 1:~sx   0   0   0   0   0   0   0
 454	 * byte 2:~sy   0   0   0   0   0   0   0
 455	 * byte 3:  0   0 ~sy ~sx   0   1   1   0
 456	 * byte 4: x7  x6  x5  x4  x3  x2  x1  x0
 457	 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
 458	 *
 459	 * x and y are written in two's complement spread
 460	 * over 9 bits with sx/sy the relative top bit and
 461	 * x7..x0 and y7..y0 the lower bits.
 462	 * The sign of y is opposite to what the input driver
 463	 * expects for a relative movement
 464	 */
 465
 466	struct elantech_data *etd = psmouse->private;
 467	struct input_dev *tp_dev = etd->tp_dev;
 468	unsigned char *packet = psmouse->packet;
 469	int x, y;
 470	u32 t;
 471
 472	t = get_unaligned_le32(&packet[0]);
 473
 474	switch (t & ~7U) {
 475	case 0x06000030U:
 476	case 0x16008020U:
 477	case 0x26800010U:
 478	case 0x36808000U:
 
 
 
 
 
 
 
 
 
 
 
 
 
 479		x = packet[4] - (int)((packet[1]^0x80) << 1);
 480		y = (int)((packet[2]^0x80) << 1) - packet[5];
 481
 482		psmouse_report_standard_buttons(tp_dev, packet[0]);
 483
 484		input_report_rel(tp_dev, REL_X, x);
 485		input_report_rel(tp_dev, REL_Y, y);
 486
 487		input_sync(tp_dev);
 488
 489		break;
 490
 491	default:
 492		/* Dump unexpected packet sequences if debug=1 (default) */
 493		if (etd->info.debug == 1)
 494			elantech_packet_dump(psmouse);
 495
 496		break;
 497	}
 498}
 499
 500/*
 501 * Interpret complete data packets and report absolute mode input events for
 502 * hardware version 3. (12 byte packets for two fingers)
 503 */
 504static void elantech_report_absolute_v3(struct psmouse *psmouse,
 505					int packet_type)
 506{
 507	struct input_dev *dev = psmouse->dev;
 508	struct elantech_data *etd = psmouse->private;
 509	unsigned char *packet = psmouse->packet;
 510	unsigned int fingers = 0, x1 = 0, y1 = 0, x2 = 0, y2 = 0;
 511	unsigned int width = 0, pres = 0;
 512
 513	/* byte 0: n1  n0   .   .   .   .   R   L */
 514	fingers = (packet[0] & 0xc0) >> 6;
 515
 516	switch (fingers) {
 517	case 3:
 518	case 1:
 519		/*
 520		 * byte 1:  .   .   .   .  x11 x10 x9  x8
 521		 * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
 522		 */
 523		x1 = ((packet[1] & 0x0f) << 8) | packet[2];
 524		/*
 525		 * byte 4:  .   .   .   .  y11 y10 y9  y8
 526		 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
 527		 */
 528		y1 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 529		break;
 530
 531	case 2:
 532		if (packet_type == PACKET_V3_HEAD) {
 533			/*
 534			 * byte 1:   .    .    .    .  ax11 ax10 ax9  ax8
 535			 * byte 2: ax7  ax6  ax5  ax4  ax3  ax2  ax1  ax0
 536			 */
 537			etd->mt[0].x = ((packet[1] & 0x0f) << 8) | packet[2];
 538			/*
 539			 * byte 4:   .    .    .    .  ay11 ay10 ay9  ay8
 540			 * byte 5: ay7  ay6  ay5  ay4  ay3  ay2  ay1  ay0
 541			 */
 542			etd->mt[0].y = etd->y_max -
 543				(((packet[4] & 0x0f) << 8) | packet[5]);
 544			/*
 545			 * wait for next packet
 546			 */
 547			return;
 548		}
 549
 550		/* packet_type == PACKET_V3_TAIL */
 551		x1 = etd->mt[0].x;
 552		y1 = etd->mt[0].y;
 553		x2 = ((packet[1] & 0x0f) << 8) | packet[2];
 554		y2 = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 555		break;
 556	}
 557
 558	pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
 559	width = ((packet[0] & 0x30) >> 2) | ((packet[3] & 0x30) >> 4);
 560
 561	input_report_key(dev, BTN_TOUCH, fingers != 0);
 562	if (fingers != 0) {
 563		input_report_abs(dev, ABS_X, x1);
 564		input_report_abs(dev, ABS_Y, y1);
 565	}
 566	elantech_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
 567	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
 568	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
 569	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
 570
 571	/* For clickpads map both buttons to BTN_LEFT */
 572	if (elantech_is_buttonpad(&etd->info))
 573		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
 574	else
 575		psmouse_report_standard_buttons(dev, packet[0]);
 576
 577	input_report_abs(dev, ABS_PRESSURE, pres);
 578	input_report_abs(dev, ABS_TOOL_WIDTH, width);
 579
 580	input_sync(dev);
 581}
 582
 583static void elantech_input_sync_v4(struct psmouse *psmouse)
 584{
 585	struct input_dev *dev = psmouse->dev;
 586	struct elantech_data *etd = psmouse->private;
 587	unsigned char *packet = psmouse->packet;
 588
 589	/* For clickpads map both buttons to BTN_LEFT */
 590	if (elantech_is_buttonpad(&etd->info))
 591		input_report_key(dev, BTN_LEFT, packet[0] & 0x03);
 592	else
 593		psmouse_report_standard_buttons(dev, packet[0]);
 594
 595	input_mt_report_pointer_emulation(dev, true);
 596	input_sync(dev);
 597}
 598
 599static void process_packet_status_v4(struct psmouse *psmouse)
 600{
 601	struct input_dev *dev = psmouse->dev;
 602	unsigned char *packet = psmouse->packet;
 603	unsigned fingers;
 604	int i;
 605
 606	/* notify finger state change */
 607	fingers = packet[1] & 0x1f;
 608	for (i = 0; i < ETP_MAX_FINGERS; i++) {
 609		if ((fingers & (1 << i)) == 0) {
 610			input_mt_slot(dev, i);
 611			input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
 612		}
 613	}
 614
 615	elantech_input_sync_v4(psmouse);
 616}
 617
 618static void process_packet_head_v4(struct psmouse *psmouse)
 619{
 620	struct input_dev *dev = psmouse->dev;
 621	struct elantech_data *etd = psmouse->private;
 622	unsigned char *packet = psmouse->packet;
 623	int id = ((packet[3] & 0xe0) >> 5) - 1;
 624	int pres, traces;
 625
 626	if (id < 0)
 627		return;
 628
 629	etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2];
 630	etd->mt[id].y = etd->y_max - (((packet[4] & 0x0f) << 8) | packet[5]);
 631	pres = (packet[1] & 0xf0) | ((packet[4] & 0xf0) >> 4);
 632	traces = (packet[0] & 0xf0) >> 4;
 633
 634	input_mt_slot(dev, id);
 635	input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
 636
 637	input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
 638	input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
 639	input_report_abs(dev, ABS_MT_PRESSURE, pres);
 640	input_report_abs(dev, ABS_MT_TOUCH_MAJOR, traces * etd->width);
 641	/* report this for backwards compatibility */
 642	input_report_abs(dev, ABS_TOOL_WIDTH, traces);
 643
 644	elantech_input_sync_v4(psmouse);
 645}
 646
 647static void process_packet_motion_v4(struct psmouse *psmouse)
 648{
 649	struct input_dev *dev = psmouse->dev;
 650	struct elantech_data *etd = psmouse->private;
 651	unsigned char *packet = psmouse->packet;
 652	int weight, delta_x1 = 0, delta_y1 = 0, delta_x2 = 0, delta_y2 = 0;
 653	int id, sid;
 654
 655	id = ((packet[0] & 0xe0) >> 5) - 1;
 656	if (id < 0)
 657		return;
 658
 659	sid = ((packet[3] & 0xe0) >> 5) - 1;
 660	weight = (packet[0] & 0x10) ? ETP_WEIGHT_VALUE : 1;
 661	/*
 662	 * Motion packets give us the delta of x, y values of specific fingers,
 663	 * but in two's complement. Let the compiler do the conversion for us.
 664	 * Also _enlarge_ the numbers to int, in case of overflow.
 665	 */
 666	delta_x1 = (signed char)packet[1];
 667	delta_y1 = (signed char)packet[2];
 668	delta_x2 = (signed char)packet[4];
 669	delta_y2 = (signed char)packet[5];
 670
 671	etd->mt[id].x += delta_x1 * weight;
 672	etd->mt[id].y -= delta_y1 * weight;
 673	input_mt_slot(dev, id);
 674	input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x);
 675	input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
 676
 677	if (sid >= 0) {
 678		etd->mt[sid].x += delta_x2 * weight;
 679		etd->mt[sid].y -= delta_y2 * weight;
 680		input_mt_slot(dev, sid);
 681		input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[sid].x);
 682		input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[sid].y);
 683	}
 684
 685	elantech_input_sync_v4(psmouse);
 686}
 687
 688static void elantech_report_absolute_v4(struct psmouse *psmouse,
 689					int packet_type)
 690{
 691	switch (packet_type) {
 692	case PACKET_V4_STATUS:
 693		process_packet_status_v4(psmouse);
 694		break;
 695
 696	case PACKET_V4_HEAD:
 697		process_packet_head_v4(psmouse);
 698		break;
 699
 700	case PACKET_V4_MOTION:
 701		process_packet_motion_v4(psmouse);
 702		break;
 703
 704	case PACKET_UNKNOWN:
 705	default:
 706		/* impossible to get here */
 707		break;
 708	}
 709}
 710
 711static int elantech_packet_check_v1(struct psmouse *psmouse)
 712{
 713	struct elantech_data *etd = psmouse->private;
 714	unsigned char *packet = psmouse->packet;
 715	unsigned char p1, p2, p3;
 716
 717	/* Parity bits are placed differently */
 718	if (etd->info.fw_version < 0x020000) {
 719		/* byte 0:  D   U  p1  p2   1  p3   R   L */
 720		p1 = (packet[0] & 0x20) >> 5;
 721		p2 = (packet[0] & 0x10) >> 4;
 722	} else {
 723		/* byte 0: n1  n0  p2  p1   1  p3   R   L */
 724		p1 = (packet[0] & 0x10) >> 4;
 725		p2 = (packet[0] & 0x20) >> 5;
 726	}
 727
 728	p3 = (packet[0] & 0x04) >> 2;
 729
 730	return etd->parity[packet[1]] == p1 &&
 731	       etd->parity[packet[2]] == p2 &&
 732	       etd->parity[packet[3]] == p3;
 733}
 734
 735static int elantech_debounce_check_v2(struct psmouse *psmouse)
 736{
 737        /*
 738         * When we encounter packet that matches this exactly, it means the
 739         * hardware is in debounce status. Just ignore the whole packet.
 740         */
 741	static const u8 debounce_packet[] = {
 742		0x84, 0xff, 0xff, 0x02, 0xff, 0xff
 743	};
 744        unsigned char *packet = psmouse->packet;
 745
 746        return !memcmp(packet, debounce_packet, sizeof(debounce_packet));
 747}
 748
 749static int elantech_packet_check_v2(struct psmouse *psmouse)
 750{
 751	struct elantech_data *etd = psmouse->private;
 752	unsigned char *packet = psmouse->packet;
 753
 754	/*
 755	 * V2 hardware has two flavors. Older ones that do not report pressure,
 756	 * and newer ones that reports pressure and width. With newer ones, all
 757	 * packets (1, 2, 3 finger touch) have the same constant bits. With
 758	 * older ones, 1/3 finger touch packets and 2 finger touch packets
 759	 * have different constant bits.
 760	 * With all three cases, if the constant bits are not exactly what I
 761	 * expected, I consider them invalid.
 762	 */
 763	if (etd->info.reports_pressure)
 764		return (packet[0] & 0x0c) == 0x04 &&
 765		       (packet[3] & 0x0f) == 0x02;
 766
 767	if ((packet[0] & 0xc0) == 0x80)
 768		return (packet[0] & 0x0c) == 0x0c &&
 769		       (packet[3] & 0x0e) == 0x08;
 770
 771	return (packet[0] & 0x3c) == 0x3c &&
 772	       (packet[1] & 0xf0) == 0x00 &&
 773	       (packet[3] & 0x3e) == 0x38 &&
 774	       (packet[4] & 0xf0) == 0x00;
 775}
 776
 777/*
 778 * We check the constant bits to determine what packet type we get,
 779 * so packet checking is mandatory for v3 and later hardware.
 780 */
 781static int elantech_packet_check_v3(struct psmouse *psmouse)
 782{
 783	struct elantech_data *etd = psmouse->private;
 784	static const u8 debounce_packet[] = {
 785		0xc4, 0xff, 0xff, 0x02, 0xff, 0xff
 786	};
 787	unsigned char *packet = psmouse->packet;
 788
 789	/*
 790	 * check debounce first, it has the same signature in byte 0
 791	 * and byte 3 as PACKET_V3_HEAD.
 792	 */
 793	if (!memcmp(packet, debounce_packet, sizeof(debounce_packet)))
 794		return PACKET_DEBOUNCE;
 795
 796	/*
 797	 * If the hardware flag 'crc_enabled' is set the packets have
 798	 * different signatures.
 799	 */
 800	if (etd->info.crc_enabled) {
 801		if ((packet[3] & 0x09) == 0x08)
 802			return PACKET_V3_HEAD;
 803
 804		if ((packet[3] & 0x09) == 0x09)
 805			return PACKET_V3_TAIL;
 806	} else {
 807		if ((packet[0] & 0x0c) == 0x04 && (packet[3] & 0xcf) == 0x02)
 808			return PACKET_V3_HEAD;
 809
 810		if ((packet[0] & 0x0c) == 0x0c && (packet[3] & 0xce) == 0x0c)
 811			return PACKET_V3_TAIL;
 812		if ((packet[3] & 0x0f) == 0x06)
 813			return PACKET_TRACKPOINT;
 814	}
 815
 816	return PACKET_UNKNOWN;
 817}
 818
 819static int elantech_packet_check_v4(struct psmouse *psmouse)
 820{
 821	struct elantech_data *etd = psmouse->private;
 822	unsigned char *packet = psmouse->packet;
 823	unsigned char packet_type = packet[3] & 0x03;
 824	unsigned int ic_version;
 825	bool sanity_check;
 826
 827	if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
 828		return PACKET_TRACKPOINT;
 829
 830	/* This represents the version of IC body. */
 831	ic_version = (etd->info.fw_version & 0x0f0000) >> 16;
 832
 833	/*
 834	 * Sanity check based on the constant bits of a packet.
 835	 * The constant bits change depending on the value of
 836	 * the hardware flag 'crc_enabled' and the version of
 837	 * the IC body, but are the same for every packet,
 838	 * regardless of the type.
 839	 */
 840	if (etd->info.crc_enabled)
 841		sanity_check = ((packet[3] & 0x08) == 0x00);
 842	else if (ic_version == 7 && etd->info.samples[1] == 0x2A)
 843		sanity_check = ((packet[3] & 0x1c) == 0x10);
 844	else
 845		sanity_check = ((packet[0] & 0x08) == 0x00 &&
 846				(packet[3] & 0x1c) == 0x10);
 847
 848	if (!sanity_check)
 849		return PACKET_UNKNOWN;
 850
 851	switch (packet_type) {
 852	case 0:
 853		return PACKET_V4_STATUS;
 854
 855	case 1:
 856		return PACKET_V4_HEAD;
 857
 858	case 2:
 859		return PACKET_V4_MOTION;
 860	}
 861
 862	return PACKET_UNKNOWN;
 863}
 864
 865/*
 866 * Process byte stream from mouse and handle complete packets
 867 */
 868static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
 869{
 870	struct elantech_data *etd = psmouse->private;
 871	int packet_type;
 872
 873	if (psmouse->pktcnt < psmouse->pktsize)
 874		return PSMOUSE_GOOD_DATA;
 875
 876	if (etd->info.debug > 1)
 877		elantech_packet_dump(psmouse);
 878
 879	switch (etd->info.hw_version) {
 880	case 1:
 881		if (etd->info.paritycheck && !elantech_packet_check_v1(psmouse))
 882			return PSMOUSE_BAD_DATA;
 883
 884		elantech_report_absolute_v1(psmouse);
 885		break;
 886
 887	case 2:
 888		/* ignore debounce */
 889		if (elantech_debounce_check_v2(psmouse))
 890			return PSMOUSE_FULL_PACKET;
 891
 892		if (etd->info.paritycheck && !elantech_packet_check_v2(psmouse))
 893			return PSMOUSE_BAD_DATA;
 894
 895		elantech_report_absolute_v2(psmouse);
 896		break;
 897
 898	case 3:
 899		packet_type = elantech_packet_check_v3(psmouse);
 900		switch (packet_type) {
 901		case PACKET_UNKNOWN:
 902			return PSMOUSE_BAD_DATA;
 903
 904		case PACKET_DEBOUNCE:
 905			/* ignore debounce */
 906			break;
 907
 908		case PACKET_TRACKPOINT:
 909			elantech_report_trackpoint(psmouse, packet_type);
 910			break;
 911
 912		default:
 913			elantech_report_absolute_v3(psmouse, packet_type);
 914			break;
 915		}
 916
 917		break;
 918
 919	case 4:
 920		packet_type = elantech_packet_check_v4(psmouse);
 921		switch (packet_type) {
 922		case PACKET_UNKNOWN:
 923			return PSMOUSE_BAD_DATA;
 924
 925		case PACKET_TRACKPOINT:
 926			elantech_report_trackpoint(psmouse, packet_type);
 927			break;
 928
 929		default:
 930			elantech_report_absolute_v4(psmouse, packet_type);
 931			break;
 932		}
 933
 934		break;
 935	}
 936
 937	return PSMOUSE_FULL_PACKET;
 938}
 939
 940/*
 941 * This writes the reg_07 value again to the hardware at the end of every
 942 * set_rate call because the register loses its value. reg_07 allows setting
 943 * absolute mode on v4 hardware
 944 */
 945static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
 946		unsigned int rate)
 947{
 948	struct elantech_data *etd = psmouse->private;
 949
 950	etd->original_set_rate(psmouse, rate);
 951	if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
 952		psmouse_err(psmouse, "restoring reg_07 failed\n");
 953}
 954
 955/*
 956 * Put the touchpad into absolute mode
 957 */
 958static int elantech_set_absolute_mode(struct psmouse *psmouse)
 959{
 960	struct elantech_data *etd = psmouse->private;
 961	unsigned char val;
 962	int tries = ETP_READ_BACK_TRIES;
 963	int rc = 0;
 964
 965	switch (etd->info.hw_version) {
 966	case 1:
 967		etd->reg_10 = 0x16;
 968		etd->reg_11 = 0x8f;
 969		if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
 970		    elantech_write_reg(psmouse, 0x11, etd->reg_11)) {
 971			rc = -1;
 972		}
 973		break;
 974
 975	case 2:
 976					/* Windows driver values */
 977		etd->reg_10 = 0x54;
 978		etd->reg_11 = 0x88;	/* 0x8a */
 979		etd->reg_21 = 0x60;	/* 0x00 */
 980		if (elantech_write_reg(psmouse, 0x10, etd->reg_10) ||
 981		    elantech_write_reg(psmouse, 0x11, etd->reg_11) ||
 982		    elantech_write_reg(psmouse, 0x21, etd->reg_21)) {
 983			rc = -1;
 984		}
 985		break;
 986
 987	case 3:
 988		if (etd->info.set_hw_resolution)
 989			etd->reg_10 = 0x0b;
 990		else
 991			etd->reg_10 = 0x01;
 992
 993		if (elantech_write_reg(psmouse, 0x10, etd->reg_10))
 994			rc = -1;
 995
 996		break;
 997
 998	case 4:
 999		etd->reg_07 = 0x01;
1000		if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
1001			rc = -1;
1002
1003		goto skip_readback_reg_10; /* v4 has no reg 0x10 to read */
1004	}
1005
1006	if (rc == 0) {
1007		/*
1008		 * Read back reg 0x10. For hardware version 1 we must make
1009		 * sure the absolute mode bit is set. For hardware version 2
1010		 * the touchpad is probably initializing and not ready until
1011		 * we read back the value we just wrote.
1012		 */
1013		do {
1014			rc = elantech_read_reg(psmouse, 0x10, &val);
1015			if (rc == 0)
1016				break;
1017			tries--;
1018			elantech_debug("retrying read (%d).\n", tries);
1019			msleep(ETP_READ_BACK_DELAY);
1020		} while (tries > 0);
1021
1022		if (rc) {
1023			psmouse_err(psmouse,
1024				    "failed to read back register 0x10.\n");
1025		} else if (etd->info.hw_version == 1 &&
1026			   !(val & ETP_R10_ABSOLUTE_MODE)) {
1027			psmouse_err(psmouse,
1028				    "touchpad refuses to switch to absolute mode.\n");
1029			rc = -1;
1030		}
1031	}
1032
1033 skip_readback_reg_10:
1034	if (rc)
1035		psmouse_err(psmouse, "failed to initialise registers.\n");
1036
1037	return rc;
1038}
1039
1040/*
1041 * (value from firmware) * 10 + 790 = dpi
1042 * we also have to convert dpi to dots/mm (*10/254 to avoid floating point)
1043 */
1044static unsigned int elantech_convert_res(unsigned int val)
1045{
1046	return (val * 10 + 790) * 10 / 254;
1047}
1048
1049static int elantech_get_resolution_v4(struct psmouse *psmouse,
1050				      unsigned int *x_res,
1051				      unsigned int *y_res,
1052				      unsigned int *bus)
1053{
1054	unsigned char param[3];
1055
1056	if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param))
1057		return -1;
1058
1059	*x_res = elantech_convert_res(param[1] & 0x0f);
1060	*y_res = elantech_convert_res((param[1] & 0xf0) >> 4);
1061	*bus = param[2];
1062
1063	return 0;
1064}
1065
1066static void elantech_set_buttonpad_prop(struct psmouse *psmouse)
1067{
1068	struct input_dev *dev = psmouse->dev;
1069	struct elantech_data *etd = psmouse->private;
1070
1071	if (elantech_is_buttonpad(&etd->info)) {
1072		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
1073		__clear_bit(BTN_RIGHT, dev->keybit);
1074	}
1075}
1076
1077/*
1078 * Some hw_version 4 models do have a middle button
1079 */
1080static const struct dmi_system_id elantech_dmi_has_middle_button[] = {
1081#if defined(CONFIG_DMI) && defined(CONFIG_X86)
1082	{
1083		/* Fujitsu H730 has a middle button */
1084		.matches = {
1085			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1086			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
1087		},
1088	},
1089	{
1090		/* Fujitsu H760 also has a middle button */
1091		.matches = {
1092			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1093			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
1094		},
1095	},
1096	{
1097		/* Fujitsu H780 also has a middle button */
1098		.matches = {
1099			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1100			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H780"),
1101		},
1102	},
1103#endif
1104	{ }
1105};
1106
1107/*
1108 * Set the appropriate event bits for the input subsystem
1109 */
1110static int elantech_set_input_params(struct psmouse *psmouse)
1111{
1112	struct input_dev *dev = psmouse->dev;
1113	struct elantech_data *etd = psmouse->private;
1114	struct elantech_device_info *info = &etd->info;
1115	unsigned int x_min = info->x_min, y_min = info->y_min,
1116		     x_max = info->x_max, y_max = info->y_max,
1117		     width = info->width;
1118
1119	__set_bit(INPUT_PROP_POINTER, dev->propbit);
1120	__set_bit(EV_KEY, dev->evbit);
1121	__set_bit(EV_ABS, dev->evbit);
1122	__clear_bit(EV_REL, dev->evbit);
1123
1124	__set_bit(BTN_LEFT, dev->keybit);
1125	if (info->has_middle_button)
1126		__set_bit(BTN_MIDDLE, dev->keybit);
1127	__set_bit(BTN_RIGHT, dev->keybit);
1128
1129	__set_bit(BTN_TOUCH, dev->keybit);
1130	__set_bit(BTN_TOOL_FINGER, dev->keybit);
1131	__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
1132	__set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
1133
1134	switch (info->hw_version) {
1135	case 1:
1136		/* Rocker button */
1137		if (info->fw_version < 0x020000 &&
1138		    (info->capabilities[0] & ETP_CAP_HAS_ROCKER)) {
1139			__set_bit(BTN_FORWARD, dev->keybit);
1140			__set_bit(BTN_BACK, dev->keybit);
1141		}
1142		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1143		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1144		break;
1145
1146	case 2:
1147		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
1148		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
1149		/* fall through */
1150	case 3:
1151		if (info->hw_version == 3)
1152			elantech_set_buttonpad_prop(psmouse);
1153		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1154		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1155		if (info->reports_pressure) {
1156			input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
1157					     ETP_PMAX_V2, 0, 0);
1158			input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
1159					     ETP_WMAX_V2, 0, 0);
1160		}
1161		input_mt_init_slots(dev, 2, INPUT_MT_SEMI_MT);
1162		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
1163		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
1164		break;
1165
1166	case 4:
1167		elantech_set_buttonpad_prop(psmouse);
1168		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
1169		/* For X to recognize me as touchpad. */
1170		input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
1171		input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
1172		/*
1173		 * range of pressure and width is the same as v2,
1174		 * report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
1175		 */
1176		input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2,
1177				     ETP_PMAX_V2, 0, 0);
1178		input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2,
1179				     ETP_WMAX_V2, 0, 0);
1180		/* Multitouch capable pad, up to 5 fingers. */
1181		input_mt_init_slots(dev, ETP_MAX_FINGERS, 0);
1182		input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
1183		input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
1184		input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
1185				     ETP_PMAX_V2, 0, 0);
1186		/*
1187		 * The firmware reports how many trace lines the finger spans,
1188		 * convert to surface unit as Protocol-B requires.
1189		 */
1190		input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0,
1191				     ETP_WMAX_V2 * width, 0, 0);
1192		break;
1193	}
1194
1195	input_abs_set_res(dev, ABS_X, info->x_res);
1196	input_abs_set_res(dev, ABS_Y, info->y_res);
1197	if (info->hw_version > 1) {
1198		input_abs_set_res(dev, ABS_MT_POSITION_X, info->x_res);
1199		input_abs_set_res(dev, ABS_MT_POSITION_Y, info->y_res);
1200	}
1201
1202	etd->y_max = y_max;
1203	etd->width = width;
1204
1205	return 0;
1206}
1207
1208struct elantech_attr_data {
1209	size_t		field_offset;
1210	unsigned char	reg;
1211};
1212
1213/*
1214 * Display a register value by reading a sysfs entry
1215 */
1216static ssize_t elantech_show_int_attr(struct psmouse *psmouse, void *data,
1217					char *buf)
1218{
1219	struct elantech_data *etd = psmouse->private;
1220	struct elantech_attr_data *attr = data;
1221	unsigned char *reg = (unsigned char *) etd + attr->field_offset;
1222	int rc = 0;
1223
1224	if (attr->reg)
1225		rc = elantech_read_reg(psmouse, attr->reg, reg);
1226
1227	return sprintf(buf, "0x%02x\n", (attr->reg && rc) ? -1 : *reg);
1228}
1229
1230/*
1231 * Write a register value by writing a sysfs entry
1232 */
1233static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
1234				     void *data, const char *buf, size_t count)
1235{
1236	struct elantech_data *etd = psmouse->private;
1237	struct elantech_attr_data *attr = data;
1238	unsigned char *reg = (unsigned char *) etd + attr->field_offset;
1239	unsigned char value;
1240	int err;
1241
1242	err = kstrtou8(buf, 16, &value);
1243	if (err)
1244		return err;
1245
1246	/* Do we need to preserve some bits for version 2 hardware too? */
1247	if (etd->info.hw_version == 1) {
1248		if (attr->reg == 0x10)
1249			/* Force absolute mode always on */
1250			value |= ETP_R10_ABSOLUTE_MODE;
1251		else if (attr->reg == 0x11)
1252			/* Force 4 byte mode always on */
1253			value |= ETP_R11_4_BYTE_MODE;
1254	}
1255
1256	if (!attr->reg || elantech_write_reg(psmouse, attr->reg, value) == 0)
1257		*reg = value;
1258
1259	return count;
1260}
1261
1262#define ELANTECH_INT_ATTR(_name, _register)				\
1263	static struct elantech_attr_data elantech_attr_##_name = {	\
1264		.field_offset = offsetof(struct elantech_data, _name),	\
1265		.reg = _register,					\
1266	};								\
1267	PSMOUSE_DEFINE_ATTR(_name, 0644,				\
1268			    &elantech_attr_##_name,			\
1269			    elantech_show_int_attr,			\
1270			    elantech_set_int_attr)
1271
1272#define ELANTECH_INFO_ATTR(_name)					       \
1273	static struct elantech_attr_data elantech_attr_##_name = {	       \
1274		.field_offset = offsetof(struct elantech_data, info) +	       \
1275				offsetof(struct elantech_device_info, _name),  \
1276		.reg = 0,						       \
1277	};								       \
1278	PSMOUSE_DEFINE_ATTR(_name, 0644,				       \
1279			    &elantech_attr_##_name,			       \
1280			    elantech_show_int_attr,			       \
1281			    elantech_set_int_attr)
1282
1283ELANTECH_INT_ATTR(reg_07, 0x07);
1284ELANTECH_INT_ATTR(reg_10, 0x10);
1285ELANTECH_INT_ATTR(reg_11, 0x11);
1286ELANTECH_INT_ATTR(reg_20, 0x20);
1287ELANTECH_INT_ATTR(reg_21, 0x21);
1288ELANTECH_INT_ATTR(reg_22, 0x22);
1289ELANTECH_INT_ATTR(reg_23, 0x23);
1290ELANTECH_INT_ATTR(reg_24, 0x24);
1291ELANTECH_INT_ATTR(reg_25, 0x25);
1292ELANTECH_INT_ATTR(reg_26, 0x26);
1293ELANTECH_INFO_ATTR(debug);
1294ELANTECH_INFO_ATTR(paritycheck);
1295ELANTECH_INFO_ATTR(crc_enabled);
1296
1297static struct attribute *elantech_attrs[] = {
1298	&psmouse_attr_reg_07.dattr.attr,
1299	&psmouse_attr_reg_10.dattr.attr,
1300	&psmouse_attr_reg_11.dattr.attr,
1301	&psmouse_attr_reg_20.dattr.attr,
1302	&psmouse_attr_reg_21.dattr.attr,
1303	&psmouse_attr_reg_22.dattr.attr,
1304	&psmouse_attr_reg_23.dattr.attr,
1305	&psmouse_attr_reg_24.dattr.attr,
1306	&psmouse_attr_reg_25.dattr.attr,
1307	&psmouse_attr_reg_26.dattr.attr,
1308	&psmouse_attr_debug.dattr.attr,
1309	&psmouse_attr_paritycheck.dattr.attr,
1310	&psmouse_attr_crc_enabled.dattr.attr,
1311	NULL
1312};
1313
1314static const struct attribute_group elantech_attr_group = {
1315	.attrs = elantech_attrs,
1316};
1317
1318static bool elantech_is_signature_valid(const unsigned char *param)
1319{
1320	static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 };
1321	int i;
1322
1323	if (param[0] == 0)
1324		return false;
1325
1326	if (param[1] == 0)
1327		return true;
1328
1329	/*
1330	 * Some hw_version >= 4 models have a revision higher then 20. Meaning
1331	 * that param[2] may be 10 or 20, skip the rates check for these.
1332	 */
1333	if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f &&
1334	    param[2] < 40)
1335		return true;
1336
1337	for (i = 0; i < ARRAY_SIZE(rates); i++)
1338		if (param[2] == rates[i])
1339			return false;
1340
1341	return true;
1342}
1343
1344/*
1345 * Use magic knock to detect Elantech touchpad
1346 */
1347int elantech_detect(struct psmouse *psmouse, bool set_properties)
1348{
1349	struct ps2dev *ps2dev = &psmouse->ps2dev;
1350	unsigned char param[3];
1351
1352	ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
1353
1354	if (ps2_command(ps2dev,  NULL, PSMOUSE_CMD_DISABLE) ||
1355	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
1356	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
1357	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
1358	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
1359		psmouse_dbg(psmouse, "sending Elantech magic knock failed.\n");
1360		return -1;
1361	}
1362
1363	/*
1364	 * Report this in case there are Elantech models that use a different
1365	 * set of magic numbers
1366	 */
1367	if (param[0] != 0x3c || param[1] != 0x03 ||
1368	    (param[2] != 0xc8 && param[2] != 0x00)) {
1369		psmouse_dbg(psmouse,
1370			    "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
1371			    param[0], param[1], param[2]);
1372		return -1;
1373	}
1374
1375	/*
1376	 * Query touchpad's firmware version and see if it reports known
1377	 * value to avoid mis-detection. Logitech mice are known to respond
1378	 * to Elantech magic knock and there might be more.
1379	 */
1380	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
1381		psmouse_dbg(psmouse, "failed to query firmware version.\n");
1382		return -1;
1383	}
1384
1385	psmouse_dbg(psmouse,
1386		    "Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
1387		    param[0], param[1], param[2]);
1388
1389	if (!elantech_is_signature_valid(param)) {
1390		psmouse_dbg(psmouse,
1391			    "Probably not a real Elantech touchpad. Aborting.\n");
1392		return -1;
1393	}
1394
1395	if (set_properties) {
1396		psmouse->vendor = "Elantech";
1397		psmouse->name = "Touchpad";
1398	}
1399
1400	return 0;
1401}
1402
1403/*
1404 * Clean up sysfs entries when disconnecting
1405 */
1406static void elantech_disconnect(struct psmouse *psmouse)
1407{
1408	struct elantech_data *etd = psmouse->private;
1409
1410	/*
1411	 * We might have left a breadcrumb when trying to
1412	 * set up SMbus companion.
1413	 */
1414	psmouse_smbus_cleanup(psmouse);
1415
1416	if (etd->tp_dev)
1417		input_unregister_device(etd->tp_dev);
1418	sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
1419			   &elantech_attr_group);
1420	kfree(psmouse->private);
1421	psmouse->private = NULL;
1422}
1423
1424/*
1425 * Put the touchpad back into absolute mode when reconnecting
1426 */
1427static int elantech_reconnect(struct psmouse *psmouse)
1428{
1429	psmouse_reset(psmouse);
1430
1431	if (elantech_detect(psmouse, 0))
1432		return -1;
1433
1434	if (elantech_set_absolute_mode(psmouse)) {
1435		psmouse_err(psmouse,
1436			    "failed to put touchpad back into absolute mode.\n");
1437		return -1;
1438	}
1439
1440	return 0;
1441}
1442
1443/*
1444 * Some hw_version 4 models do not work with crc_disabled
1445 */
1446static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
1447#if defined(CONFIG_DMI) && defined(CONFIG_X86)
1448	{
1449		/* Fujitsu H730 does not work with crc_enabled == 0 */
1450		.matches = {
1451			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1452			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
1453		},
1454	},
1455	{
1456		/* Fujitsu H760 does not work with crc_enabled == 0 */
1457		.matches = {
1458			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1459			DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H760"),
1460		},
1461	},
1462	{
1463		/* Fujitsu LIFEBOOK E544  does not work with crc_enabled == 0 */
1464		.matches = {
1465			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1466			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E544"),
1467		},
1468	},
1469	{
1470		/* Fujitsu LIFEBOOK E546  does not work with crc_enabled == 0 */
1471		.matches = {
1472			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1473			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E546"),
1474		},
1475	},
1476	{
1477		/* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */
1478		.matches = {
1479			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1480			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E547"),
1481		},
1482	},
1483	{
1484		/* Fujitsu LIFEBOOK E554  does not work with crc_enabled == 0 */
1485		.matches = {
1486			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1487			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E554"),
1488		},
1489	},
1490	{
1491		/* Fujitsu LIFEBOOK E556 does not work with crc_enabled == 0 */
1492		.matches = {
1493			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1494			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E556"),
1495		},
1496	},
1497	{
1498		/* Fujitsu LIFEBOOK E557 does not work with crc_enabled == 0 */
1499		.matches = {
1500			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1501			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E557"),
1502		},
1503	},
1504	{
1505		/* Fujitsu LIFEBOOK U745 does not work with crc_enabled == 0 */
1506		.matches = {
1507			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
1508			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"),
1509		},
1510	},
1511#endif
1512	{ }
1513};
1514
1515/*
1516 * Some hw_version 3 models go into error state when we try to set
1517 * bit 3 and/or bit 1 of r10.
1518 */
1519static const struct dmi_system_id no_hw_res_dmi_table[] = {
1520#if defined(CONFIG_DMI) && defined(CONFIG_X86)
1521	{
1522		/* Gigabyte U2442 */
1523		.matches = {
1524			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
1525			DMI_MATCH(DMI_PRODUCT_NAME, "U2442"),
1526		},
1527	},
1528#endif
1529	{ }
1530};
1531
1532/*
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1533 * determine hardware version and set some properties according to it.
1534 */
1535static int elantech_set_properties(struct elantech_device_info *info)
1536{
1537	/* This represents the version of IC body. */
1538	int ver = (info->fw_version & 0x0f0000) >> 16;
1539
1540	/* Early version of Elan touchpads doesn't obey the rule. */
1541	if (info->fw_version < 0x020030 || info->fw_version == 0x020600)
1542		info->hw_version = 1;
1543	else {
1544		switch (ver) {
1545		case 2:
1546		case 4:
1547			info->hw_version = 2;
1548			break;
1549		case 5:
1550			info->hw_version = 3;
1551			break;
1552		case 6 ... 15:
1553			info->hw_version = 4;
1554			break;
1555		default:
1556			return -1;
1557		}
1558	}
1559
 
 
 
 
 
1560	/* decide which send_cmd we're gonna use early */
1561	info->send_cmd = info->hw_version >= 3 ? elantech_send_cmd :
1562						 synaptics_send_cmd;
1563
1564	/* Turn on packet checking by default */
1565	info->paritycheck = 1;
1566
1567	/*
1568	 * This firmware suffers from misreporting coordinates when
1569	 * a touch action starts causing the mouse cursor or scrolled page
1570	 * to jump. Enable a workaround.
1571	 */
1572	info->jumpy_cursor =
1573		(info->fw_version == 0x020022 || info->fw_version == 0x020600);
1574
1575	if (info->hw_version > 1) {
1576		/* For now show extra debug information */
1577		info->debug = 1;
1578
1579		if (info->fw_version >= 0x020800)
1580			info->reports_pressure = true;
1581	}
1582
1583	/*
1584	 * The signatures of v3 and v4 packets change depending on the
1585	 * value of this hardware flag.
1586	 */
1587	info->crc_enabled = (info->fw_version & 0x4000) == 0x4000 ||
1588			     dmi_check_system(elantech_dmi_force_crc_enabled);
1589
1590	/* Enable real hardware resolution on hw_version 3 ? */
1591	info->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
1592
1593	return 0;
1594}
1595
1596static int elantech_query_info(struct psmouse *psmouse,
1597			       struct elantech_device_info *info)
1598{
1599	unsigned char param[3];
1600	unsigned char traces;
 
1601
1602	memset(info, 0, sizeof(*info));
1603
1604	/*
1605	 * Do the version query again so we can store the result
1606	 */
1607	if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
1608		psmouse_err(psmouse, "failed to query firmware version.\n");
1609		return -EINVAL;
1610	}
1611	info->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
1612
1613	if (elantech_set_properties(info)) {
1614		psmouse_err(psmouse, "unknown hardware version, aborting...\n");
1615		return -EINVAL;
1616	}
1617	psmouse_info(psmouse,
1618		     "assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n",
1619		     info->hw_version, param[0], param[1], param[2]);
1620
1621	if (info->send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
1622	    info->capabilities)) {
1623		psmouse_err(psmouse, "failed to query capabilities.\n");
1624		return -EINVAL;
1625	}
1626	psmouse_info(psmouse,
1627		     "Synaptics capabilities query result 0x%02x, 0x%02x, 0x%02x.\n",
1628		     info->capabilities[0], info->capabilities[1],
1629		     info->capabilities[2]);
1630
1631	if (info->hw_version != 1) {
1632		if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, info->samples)) {
1633			psmouse_err(psmouse, "failed to query sample data\n");
1634			return -EINVAL;
1635		}
1636		psmouse_info(psmouse,
1637			     "Elan sample query result %02x, %02x, %02x\n",
1638			     info->samples[0],
1639			     info->samples[1],
1640			     info->samples[2]);
1641	}
1642
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1643	if (info->samples[1] == 0x74 && info->hw_version == 0x03) {
1644		/*
1645		 * This module has a bug which makes absolute mode
1646		 * unusable, so let's abort so we'll be using standard
1647		 * PS/2 protocol.
1648		 */
1649		psmouse_info(psmouse,
1650			     "absolute mode broken, forcing standard PS/2 protocol\n");
1651		return -ENODEV;
1652	}
1653
1654	/* The MSB indicates the presence of the trackpoint */
1655	info->has_trackpoint = (info->capabilities[0] & 0x80) == 0x80;
1656
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1657	info->x_res = 31;
1658	info->y_res = 31;
1659	if (info->hw_version == 4) {
1660		if (elantech_get_resolution_v4(psmouse,
1661					       &info->x_res,
1662					       &info->y_res,
1663					       &info->bus)) {
1664			psmouse_warn(psmouse,
1665				     "failed to query resolution data.\n");
1666		}
1667	}
1668
1669	/* query range information */
1670	switch (info->hw_version) {
1671	case 1:
1672		info->x_min = ETP_XMIN_V1;
1673		info->y_min = ETP_YMIN_V1;
1674		info->x_max = ETP_XMAX_V1;
1675		info->y_max = ETP_YMAX_V1;
1676		break;
1677
1678	case 2:
1679		if (info->fw_version == 0x020800 ||
1680		    info->fw_version == 0x020b00 ||
1681		    info->fw_version == 0x020030) {
1682			info->x_min = ETP_XMIN_V2;
1683			info->y_min = ETP_YMIN_V2;
1684			info->x_max = ETP_XMAX_V2;
1685			info->y_max = ETP_YMAX_V2;
1686		} else {
1687			int i;
1688			int fixed_dpi;
1689
1690			i = (info->fw_version > 0x020800 &&
1691			     info->fw_version < 0x020900) ? 1 : 2;
1692
1693			if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1694				return -EINVAL;
1695
1696			fixed_dpi = param[1] & 0x10;
1697
1698			if (((info->fw_version >> 16) == 0x14) && fixed_dpi) {
1699				if (info->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
1700					return -EINVAL;
1701
1702				info->x_max = (info->capabilities[1] - i) * param[1] / 2;
1703				info->y_max = (info->capabilities[2] - i) * param[2] / 2;
1704			} else if (info->fw_version == 0x040216) {
1705				info->x_max = 819;
1706				info->y_max = 405;
1707			} else if (info->fw_version == 0x040219 || info->fw_version == 0x040215) {
1708				info->x_max = 900;
1709				info->y_max = 500;
1710			} else {
1711				info->x_max = (info->capabilities[1] - i) * 64;
1712				info->y_max = (info->capabilities[2] - i) * 64;
1713			}
1714		}
1715		break;
1716
1717	case 3:
1718		if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1719			return -EINVAL;
1720
1721		info->x_max = (0x0f & param[0]) << 8 | param[1];
1722		info->y_max = (0xf0 & param[0]) << 4 | param[2];
1723		break;
1724
1725	case 4:
1726		if (info->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
1727			return -EINVAL;
1728
1729		info->x_max = (0x0f & param[0]) << 8 | param[1];
1730		info->y_max = (0xf0 & param[0]) << 4 | param[2];
1731		traces = info->capabilities[1];
1732		if ((traces < 2) || (traces > info->x_max))
1733			return -EINVAL;
1734
1735		info->width = info->x_max / (traces - 1);
1736
1737		/* column number of traces */
1738		info->x_traces = traces;
1739
1740		/* row number of traces */
1741		traces = info->capabilities[2];
1742		if ((traces >= 2) && (traces <= info->y_max))
1743			info->y_traces = traces;
1744
1745		break;
1746	}
1747
1748	/* check for the middle button: DMI matching or new v4 firmwares */
1749	info->has_middle_button = dmi_check_system(elantech_dmi_has_middle_button) ||
1750				  (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) &&
1751				   !elantech_is_buttonpad(info));
1752
1753	return 0;
1754}
1755
1756#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
1757
1758/*
1759 * The newest Elantech device can use a secondary bus (over SMBus) which
1760 * provides a better bandwidth and allow a better control of the touchpads.
1761 * This is used to decide if we need to use this bus or not.
1762 */
1763enum {
1764	ELANTECH_SMBUS_NOT_SET = -1,
1765	ELANTECH_SMBUS_OFF,
1766	ELANTECH_SMBUS_ON,
1767};
1768
1769static int elantech_smbus = IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ?
1770		ELANTECH_SMBUS_NOT_SET : ELANTECH_SMBUS_OFF;
1771module_param_named(elantech_smbus, elantech_smbus, int, 0644);
1772MODULE_PARM_DESC(elantech_smbus, "Use a secondary bus for the Elantech device.");
1773
1774static const char * const i2c_blacklist_pnp_ids[] = {
1775	/*
1776	 * These are known to not be working properly as bits are missing
1777	 * in elan_i2c.
1778	 */
1779	NULL
1780};
1781
1782static int elantech_create_smbus(struct psmouse *psmouse,
1783				 struct elantech_device_info *info,
1784				 bool leave_breadcrumbs)
1785{
1786	struct property_entry i2c_props[11] = {};
1787	struct i2c_board_info smbus_board = {
1788		I2C_BOARD_INFO("elan_i2c", 0x15),
1789		.flags = I2C_CLIENT_HOST_NOTIFY,
1790	};
1791	unsigned int idx = 0;
1792
1793	smbus_board.properties = i2c_props;
1794
1795	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-x",
1796						   info->x_max + 1);
1797	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-size-y",
1798						   info->y_max + 1);
1799	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-x",
1800						   info->x_min);
1801	i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-min-y",
1802						   info->y_min);
1803	if (info->x_res)
1804		i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-x-mm",
1805						      (info->x_max + 1) / info->x_res);
1806	if (info->y_res)
1807		i2c_props[idx++] = PROPERTY_ENTRY_U32("touchscreen-y-mm",
1808						      (info->y_max + 1) / info->y_res);
1809
1810	if (info->has_trackpoint)
1811		i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,trackpoint");
1812
1813	if (info->has_middle_button)
1814		i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,middle-button");
1815
1816	if (info->x_traces)
1817		i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,x_traces",
1818						      info->x_traces);
1819	if (info->y_traces)
1820		i2c_props[idx++] = PROPERTY_ENTRY_U32("elan,y_traces",
1821						      info->y_traces);
1822
1823	if (elantech_is_buttonpad(info))
1824		i2c_props[idx++] = PROPERTY_ENTRY_BOOL("elan,clickpad");
1825
 
 
 
 
1826	return psmouse_smbus_init(psmouse, &smbus_board, NULL, 0, false,
1827				  leave_breadcrumbs);
1828}
1829
1830/**
1831 * elantech_setup_smbus - called once the PS/2 devices are enumerated
1832 * and decides to instantiate a SMBus InterTouch device.
1833 */
1834static int elantech_setup_smbus(struct psmouse *psmouse,
1835				struct elantech_device_info *info,
1836				bool leave_breadcrumbs)
1837{
1838	int error;
1839
1840	if (elantech_smbus == ELANTECH_SMBUS_OFF)
1841		return -ENXIO;
1842
1843	if (elantech_smbus == ELANTECH_SMBUS_NOT_SET) {
1844		/*
1845		 * New ICs are enabled by default, unless mentioned in
1846		 * i2c_blacklist_pnp_ids.
1847		 * Old ICs are up to the user to decide.
1848		 */
1849		if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
1850		    psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
1851			return -ENXIO;
1852	}
1853
1854	psmouse_info(psmouse, "Trying to set up SMBus access\n");
1855
1856	error = elantech_create_smbus(psmouse, info, leave_breadcrumbs);
1857	if (error) {
1858		if (error == -EAGAIN)
1859			psmouse_info(psmouse, "SMbus companion is not ready yet\n");
1860		else
1861			psmouse_err(psmouse, "unable to create intertouch device\n");
1862
1863		return error;
1864	}
1865
1866	return 0;
1867}
1868
1869static bool elantech_use_host_notify(struct psmouse *psmouse,
1870				     struct elantech_device_info *info)
1871{
1872	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
1873		return true;
1874
1875	switch (info->bus) {
1876	case ETP_BUS_PS2_ONLY:
1877		/* expected case */
1878		break;
1879	case ETP_BUS_SMB_ALERT_ONLY:
1880		/* fall-through  */
1881	case ETP_BUS_PS2_SMB_ALERT:
1882		psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n");
1883		break;
1884	case ETP_BUS_SMB_HST_NTFY_ONLY:
1885		/* fall-through  */
1886	case ETP_BUS_PS2_SMB_HST_NTFY:
1887		return true;
1888	default:
1889		psmouse_dbg(psmouse,
1890			    "Ignoring SMBus bus provider %d.\n",
1891			    info->bus);
1892	}
1893
1894	return false;
1895}
1896
1897int elantech_init_smbus(struct psmouse *psmouse)
1898{
1899	struct elantech_device_info info;
1900	int error = -EINVAL;
1901
1902	psmouse_reset(psmouse);
1903
1904	error = elantech_query_info(psmouse, &info);
1905	if (error)
1906		goto init_fail;
1907
1908	if (info.hw_version < 4) {
1909		error = -ENXIO;
1910		goto init_fail;
1911	}
1912
1913	return elantech_create_smbus(psmouse, &info, false);
1914 init_fail:
1915	psmouse_reset(psmouse);
1916	return error;
1917}
1918#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
1919
1920/*
1921 * Initialize the touchpad and create sysfs entries
1922 */
1923static int elantech_setup_ps2(struct psmouse *psmouse,
1924			      struct elantech_device_info *info)
1925{
1926	struct elantech_data *etd;
1927	int i;
1928	int error = -EINVAL;
1929	struct input_dev *tp_dev;
1930
1931	psmouse->private = etd = kzalloc(sizeof(*etd), GFP_KERNEL);
1932	if (!etd)
1933		return -ENOMEM;
1934
1935	etd->info = *info;
1936
1937	etd->parity[0] = 1;
1938	for (i = 1; i < 256; i++)
1939		etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
1940
1941	if (elantech_set_absolute_mode(psmouse)) {
1942		psmouse_err(psmouse,
1943			    "failed to put touchpad into absolute mode.\n");
1944		goto init_fail;
1945	}
1946
1947	if (info->fw_version == 0x381f17) {
1948		etd->original_set_rate = psmouse->set_rate;
1949		psmouse->set_rate = elantech_set_rate_restore_reg_07;
1950	}
1951
1952	if (elantech_set_input_params(psmouse)) {
1953		psmouse_err(psmouse, "failed to query touchpad range.\n");
1954		goto init_fail;
1955	}
1956
1957	error = sysfs_create_group(&psmouse->ps2dev.serio->dev.kobj,
1958				   &elantech_attr_group);
1959	if (error) {
1960		psmouse_err(psmouse,
1961			    "failed to create sysfs attributes, error: %d.\n",
1962			    error);
1963		goto init_fail;
1964	}
1965
1966	if (info->has_trackpoint) {
1967		tp_dev = input_allocate_device();
1968
1969		if (!tp_dev) {
1970			error = -ENOMEM;
1971			goto init_fail_tp_alloc;
1972		}
1973
1974		etd->tp_dev = tp_dev;
1975		snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1",
1976			psmouse->ps2dev.serio->phys);
1977		tp_dev->phys = etd->tp_phys;
1978		tp_dev->name = "ETPS/2 Elantech TrackPoint";
1979		tp_dev->id.bustype = BUS_I8042;
1980		tp_dev->id.vendor  = 0x0002;
1981		tp_dev->id.product = PSMOUSE_ELANTECH;
1982		tp_dev->id.version = 0x0000;
1983		tp_dev->dev.parent = &psmouse->ps2dev.serio->dev;
1984		tp_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
1985		tp_dev->relbit[BIT_WORD(REL_X)] =
1986			BIT_MASK(REL_X) | BIT_MASK(REL_Y);
1987		tp_dev->keybit[BIT_WORD(BTN_LEFT)] =
1988			BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) |
1989			BIT_MASK(BTN_RIGHT);
1990
1991		__set_bit(INPUT_PROP_POINTER, tp_dev->propbit);
1992		__set_bit(INPUT_PROP_POINTING_STICK, tp_dev->propbit);
1993
1994		error = input_register_device(etd->tp_dev);
1995		if (error < 0)
1996			goto init_fail_tp_reg;
1997	}
1998
1999	psmouse->protocol_handler = elantech_process_byte;
2000	psmouse->disconnect = elantech_disconnect;
2001	psmouse->reconnect = elantech_reconnect;
2002	psmouse->pktsize = info->hw_version > 1 ? 6 : 4;
2003
2004	return 0;
2005 init_fail_tp_reg:
2006	input_free_device(tp_dev);
2007 init_fail_tp_alloc:
2008	sysfs_remove_group(&psmouse->ps2dev.serio->dev.kobj,
2009			   &elantech_attr_group);
2010 init_fail:
2011	kfree(etd);
2012	return error;
2013}
2014
2015int elantech_init_ps2(struct psmouse *psmouse)
2016{
2017	struct elantech_device_info info;
2018	int error = -EINVAL;
2019
2020	psmouse_reset(psmouse);
2021
2022	error = elantech_query_info(psmouse, &info);
2023	if (error)
2024		goto init_fail;
2025
2026	error = elantech_setup_ps2(psmouse, &info);
2027	if (error)
2028		goto init_fail;
2029
2030	return 0;
2031 init_fail:
2032	psmouse_reset(psmouse);
2033	return error;
2034}
2035
2036int elantech_init(struct psmouse *psmouse)
2037{
2038	struct elantech_device_info info;
2039	int error = -EINVAL;
2040
2041	psmouse_reset(psmouse);
2042
2043	error = elantech_query_info(psmouse, &info);
2044	if (error)
2045		goto init_fail;
2046
2047#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
2048
2049	if (elantech_use_host_notify(psmouse, &info)) {
2050		if (!IS_ENABLED(CONFIG_MOUSE_ELAN_I2C_SMBUS) ||
2051		    !IS_ENABLED(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)) {
2052			psmouse_warn(psmouse,
2053				     "The touchpad can support a better bus than the too old PS/2 protocol. "
2054				     "Make sure MOUSE_PS2_ELANTECH_SMBUS and MOUSE_ELAN_I2C_SMBUS are enabled to get a better touchpad experience.\n");
2055		}
2056		error = elantech_setup_smbus(psmouse, &info, true);
2057		if (!error)
2058			return PSMOUSE_ELANTECH_SMBUS;
2059	}
2060
2061#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
2062
2063	error = elantech_setup_ps2(psmouse, &info);
2064	if (error < 0) {
2065		/*
2066		 * Not using any flavor of Elantech support, so clean up
2067		 * SMbus breadcrumbs, if any.
2068		 */
2069		psmouse_smbus_cleanup(psmouse);
2070		goto init_fail;
2071	}
2072
2073	return PSMOUSE_ELANTECH;
2074 init_fail:
2075	psmouse_reset(psmouse);
2076	return error;
2077}