Loading...
1/*
2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43#include <dt-bindings/clock/sun6i-rtc.h>
44#include <dt-bindings/clock/sun8i-de2.h>
45#include <dt-bindings/clock/sun8i-h3-ccu.h>
46#include <dt-bindings/clock/sun8i-r-ccu.h>
47#include <dt-bindings/interrupt-controller/arm-gic.h>
48#include <dt-bindings/reset/sun8i-de2.h>
49#include <dt-bindings/reset/sun8i-h3-ccu.h>
50#include <dt-bindings/reset/sun8i-r-ccu.h>
51
52/ {
53 interrupt-parent = <&gic>;
54 #address-cells = <1>;
55 #size-cells = <1>;
56
57 chosen {
58 #address-cells = <1>;
59 #size-cells = <1>;
60 ranges;
61
62 framebuffer-hdmi {
63 compatible = "allwinner,simple-framebuffer",
64 "simple-framebuffer";
65 allwinner,pipeline = "mixer0-lcd0-hdmi";
66 clocks = <&display_clocks CLK_MIXER0>,
67 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
68 status = "disabled";
69 };
70
71 framebuffer-tve {
72 compatible = "allwinner,simple-framebuffer",
73 "simple-framebuffer";
74 allwinner,pipeline = "mixer1-lcd1-tve";
75 clocks = <&display_clocks CLK_MIXER1>,
76 <&ccu CLK_TVE>;
77 status = "disabled";
78 };
79 };
80
81 clocks {
82 #address-cells = <1>;
83 #size-cells = <1>;
84 ranges;
85
86 osc24M: osc24M_clk {
87 #clock-cells = <0>;
88 compatible = "fixed-clock";
89 clock-frequency = <24000000>;
90 clock-accuracy = <50000>;
91 clock-output-names = "osc24M";
92 };
93
94 osc32k: osc32k_clk {
95 #clock-cells = <0>;
96 compatible = "fixed-clock";
97 clock-frequency = <32768>;
98 clock-accuracy = <50000>;
99 clock-output-names = "ext_osc32k";
100 };
101 };
102
103 de: display-engine {
104 compatible = "allwinner,sun8i-h3-display-engine";
105 allwinner,pipelines = <&mixer0>;
106 status = "disabled";
107 };
108
109 soc {
110 compatible = "simple-bus";
111 #address-cells = <1>;
112 #size-cells = <1>;
113 dma-ranges;
114 ranges;
115
116 display_clocks: clock@1000000 {
117 /* compatible is in per SoC .dtsi file */
118 reg = <0x01000000 0x10000>;
119 clocks = <&ccu CLK_BUS_DE>,
120 <&ccu CLK_DE>;
121 clock-names = "bus",
122 "mod";
123 resets = <&ccu RST_BUS_DE>;
124 #clock-cells = <1>;
125 #reset-cells = <1>;
126 };
127
128 mixer0: mixer@1100000 {
129 compatible = "allwinner,sun8i-h3-de2-mixer-0";
130 reg = <0x01100000 0x100000>;
131 clocks = <&display_clocks CLK_BUS_MIXER0>,
132 <&display_clocks CLK_MIXER0>;
133 clock-names = "bus",
134 "mod";
135 resets = <&display_clocks RST_MIXER0>;
136
137 ports {
138 #address-cells = <1>;
139 #size-cells = <0>;
140
141 mixer0_out: port@1 {
142 reg = <1>;
143
144 mixer0_out_tcon0: endpoint {
145 remote-endpoint = <&tcon0_in_mixer0>;
146 };
147 };
148 };
149 };
150
151 dma: dma-controller@1c02000 {
152 compatible = "allwinner,sun8i-h3-dma";
153 reg = <0x01c02000 0x1000>;
154 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
155 clocks = <&ccu CLK_BUS_DMA>;
156 resets = <&ccu RST_BUS_DMA>;
157 #dma-cells = <1>;
158 };
159
160 tcon0: lcd-controller@1c0c000 {
161 compatible = "allwinner,sun8i-h3-tcon-tv",
162 "allwinner,sun8i-a83t-tcon-tv";
163 reg = <0x01c0c000 0x1000>;
164 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
165 clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
166 clock-names = "ahb", "tcon-ch1";
167 resets = <&ccu RST_BUS_TCON0>;
168 reset-names = "lcd";
169
170 ports {
171 #address-cells = <1>;
172 #size-cells = <0>;
173
174 tcon0_in: port@0 {
175 reg = <0>;
176
177 tcon0_in_mixer0: endpoint {
178 remote-endpoint = <&mixer0_out_tcon0>;
179 };
180 };
181
182 tcon0_out: port@1 {
183 #address-cells = <1>;
184 #size-cells = <0>;
185 reg = <1>;
186
187 tcon0_out_hdmi: endpoint@1 {
188 reg = <1>;
189 remote-endpoint = <&hdmi_in_tcon0>;
190 };
191 };
192 };
193 };
194
195 mmc0: mmc@1c0f000 {
196 /* compatible and clocks are in per SoC .dtsi file */
197 reg = <0x01c0f000 0x1000>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&mmc0_pins>;
200 resets = <&ccu RST_BUS_MMC0>;
201 reset-names = "ahb";
202 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
203 status = "disabled";
204 #address-cells = <1>;
205 #size-cells = <0>;
206 };
207
208 mmc1: mmc@1c10000 {
209 /* compatible and clocks are in per SoC .dtsi file */
210 reg = <0x01c10000 0x1000>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&mmc1_pins>;
213 resets = <&ccu RST_BUS_MMC1>;
214 reset-names = "ahb";
215 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
216 status = "disabled";
217 #address-cells = <1>;
218 #size-cells = <0>;
219 };
220
221 mmc2: mmc@1c11000 {
222 /* compatible and clocks are in per SoC .dtsi file */
223 reg = <0x01c11000 0x1000>;
224 resets = <&ccu RST_BUS_MMC2>;
225 reset-names = "ahb";
226 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
227 status = "disabled";
228 #address-cells = <1>;
229 #size-cells = <0>;
230 };
231
232 sid: eeprom@1c14000 {
233 /* compatible is in per SoC .dtsi file */
234 reg = <0x1c14000 0x400>;
235 #address-cells = <1>;
236 #size-cells = <1>;
237
238 ths_calibration: thermal-sensor-calibration@34 {
239 reg = <0x34 4>;
240 };
241 };
242
243 msgbox: mailbox@1c17000 {
244 compatible = "allwinner,sun8i-h3-msgbox",
245 "allwinner,sun6i-a31-msgbox";
246 reg = <0x01c17000 0x1000>;
247 clocks = <&ccu CLK_BUS_MSGBOX>;
248 resets = <&ccu RST_BUS_MSGBOX>;
249 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
250 #mbox-cells = <1>;
251 };
252
253 usb_otg: usb@1c19000 {
254 compatible = "allwinner,sun8i-h3-musb";
255 reg = <0x01c19000 0x400>;
256 clocks = <&ccu CLK_BUS_OTG>;
257 resets = <&ccu RST_BUS_OTG>;
258 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
259 interrupt-names = "mc";
260 phys = <&usbphy 0>;
261 phy-names = "usb";
262 extcon = <&usbphy 0>;
263 dr_mode = "otg";
264 status = "disabled";
265 };
266
267 usbphy: phy@1c19400 {
268 compatible = "allwinner,sun8i-h3-usb-phy";
269 reg = <0x01c19400 0x2c>,
270 <0x01c1a800 0x4>,
271 <0x01c1b800 0x4>,
272 <0x01c1c800 0x4>,
273 <0x01c1d800 0x4>;
274 reg-names = "phy_ctrl",
275 "pmu0",
276 "pmu1",
277 "pmu2",
278 "pmu3";
279 clocks = <&ccu CLK_USB_PHY0>,
280 <&ccu CLK_USB_PHY1>,
281 <&ccu CLK_USB_PHY2>,
282 <&ccu CLK_USB_PHY3>;
283 clock-names = "usb0_phy",
284 "usb1_phy",
285 "usb2_phy",
286 "usb3_phy";
287 resets = <&ccu RST_USB_PHY0>,
288 <&ccu RST_USB_PHY1>,
289 <&ccu RST_USB_PHY2>,
290 <&ccu RST_USB_PHY3>;
291 reset-names = "usb0_reset",
292 "usb1_reset",
293 "usb2_reset",
294 "usb3_reset";
295 status = "disabled";
296 #phy-cells = <1>;
297 };
298
299 ehci0: usb@1c1a000 {
300 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
301 reg = <0x01c1a000 0x100>;
302 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
303 clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
304 resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
305 phys = <&usbphy 0>;
306 phy-names = "usb";
307 status = "disabled";
308 };
309
310 ohci0: usb@1c1a400 {
311 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
312 reg = <0x01c1a400 0x100>;
313 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
314 clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
315 <&ccu CLK_USB_OHCI0>;
316 resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
317 phys = <&usbphy 0>;
318 phy-names = "usb";
319 status = "disabled";
320 };
321
322 ehci1: usb@1c1b000 {
323 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
324 reg = <0x01c1b000 0x100>;
325 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
326 clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
327 resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
328 phys = <&usbphy 1>;
329 phy-names = "usb";
330 status = "disabled";
331 };
332
333 ohci1: usb@1c1b400 {
334 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
335 reg = <0x01c1b400 0x100>;
336 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
337 clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
338 <&ccu CLK_USB_OHCI1>;
339 resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
340 phys = <&usbphy 1>;
341 phy-names = "usb";
342 status = "disabled";
343 };
344
345 ehci2: usb@1c1c000 {
346 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
347 reg = <0x01c1c000 0x100>;
348 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
349 clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
350 resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
351 phys = <&usbphy 2>;
352 phy-names = "usb";
353 status = "disabled";
354 };
355
356 ohci2: usb@1c1c400 {
357 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
358 reg = <0x01c1c400 0x100>;
359 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
360 clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
361 <&ccu CLK_USB_OHCI2>;
362 resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
363 phys = <&usbphy 2>;
364 phy-names = "usb";
365 status = "disabled";
366 };
367
368 ehci3: usb@1c1d000 {
369 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
370 reg = <0x01c1d000 0x100>;
371 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
372 clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
373 resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
374 phys = <&usbphy 3>;
375 phy-names = "usb";
376 status = "disabled";
377 };
378
379 ohci3: usb@1c1d400 {
380 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
381 reg = <0x01c1d400 0x100>;
382 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
383 clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
384 <&ccu CLK_USB_OHCI3>;
385 resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
386 phys = <&usbphy 3>;
387 phy-names = "usb";
388 status = "disabled";
389 };
390
391 ccu: clock@1c20000 {
392 /* compatible is in per SoC .dtsi file */
393 reg = <0x01c20000 0x400>;
394 clocks = <&osc24M>, <&rtc CLK_OSC32K>;
395 clock-names = "hosc", "losc";
396 #clock-cells = <1>;
397 #reset-cells = <1>;
398 };
399
400 pio: pinctrl@1c20800 {
401 /* compatible is in per SoC .dtsi file */
402 reg = <0x01c20800 0x400>;
403 interrupt-parent = <&r_intc>;
404 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
405 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
406 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
407 <&rtc CLK_OSC32K>;
408 clock-names = "apb", "hosc", "losc";
409 gpio-controller;
410 #gpio-cells = <3>;
411 interrupt-controller;
412 #interrupt-cells = <3>;
413
414 csi_pins: csi-pins {
415 pins = "PE0", "PE2", "PE3", "PE4", "PE5",
416 "PE6", "PE7", "PE8", "PE9", "PE10",
417 "PE11";
418 function = "csi";
419 };
420
421 emac_rgmii_pins: emac-rgmii-pins {
422 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
423 "PD5", "PD7", "PD8", "PD9", "PD10",
424 "PD12", "PD13", "PD15", "PD16", "PD17";
425 function = "emac";
426 drive-strength = <40>;
427 };
428
429 i2c0_pins: i2c0-pins {
430 pins = "PA11", "PA12";
431 function = "i2c0";
432 };
433
434 i2c1_pins: i2c1-pins {
435 pins = "PA18", "PA19";
436 function = "i2c1";
437 };
438
439 i2c2_pins: i2c2-pins {
440 pins = "PE12", "PE13";
441 function = "i2c2";
442 };
443
444 mmc0_pins: mmc0-pins {
445 pins = "PF0", "PF1", "PF2", "PF3",
446 "PF4", "PF5";
447 function = "mmc0";
448 drive-strength = <30>;
449 bias-pull-up;
450 };
451
452 mmc1_pins: mmc1-pins {
453 pins = "PG0", "PG1", "PG2", "PG3",
454 "PG4", "PG5";
455 function = "mmc1";
456 drive-strength = <30>;
457 bias-pull-up;
458 };
459
460 mmc2_8bit_pins: mmc2-8bit-pins {
461 pins = "PC5", "PC6", "PC8",
462 "PC9", "PC10", "PC11",
463 "PC12", "PC13", "PC14",
464 "PC15", "PC16";
465 function = "mmc2";
466 drive-strength = <30>;
467 bias-pull-up;
468 };
469
470 spdif_tx_pin: spdif-tx-pin {
471 pins = "PA17";
472 function = "spdif";
473 };
474
475 spi0_pins: spi0-pins {
476 pins = "PC0", "PC1", "PC2", "PC3";
477 function = "spi0";
478 };
479
480 spi1_pins: spi1-pins {
481 pins = "PA15", "PA16", "PA14", "PA13";
482 function = "spi1";
483 };
484
485 uart0_pa_pins: uart0-pa-pins {
486 pins = "PA4", "PA5";
487 function = "uart0";
488 };
489
490 uart1_pins: uart1-pins {
491 pins = "PG6", "PG7";
492 function = "uart1";
493 };
494
495 uart1_rts_cts_pins: uart1-rts-cts-pins {
496 pins = "PG8", "PG9";
497 function = "uart1";
498 };
499
500 uart2_pins: uart2-pins {
501 pins = "PA0", "PA1";
502 function = "uart2";
503 };
504
505 uart2_rts_cts_pins: uart2-rts-cts-pins {
506 pins = "PA2", "PA3";
507 function = "uart2";
508 };
509
510 uart3_pins: uart3-pins {
511 pins = "PA13", "PA14";
512 function = "uart3";
513 };
514
515 uart3_rts_cts_pins: uart3-rts-cts-pins {
516 pins = "PA15", "PA16";
517 function = "uart3";
518 };
519 };
520
521 timer@1c20c00 {
522 compatible = "allwinner,sun8i-a23-timer";
523 reg = <0x01c20c00 0xa0>;
524 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
525 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
526 clocks = <&osc24M>;
527 };
528
529 emac: ethernet@1c30000 {
530 compatible = "allwinner,sun8i-h3-emac";
531 syscon = <&syscon>;
532 reg = <0x01c30000 0x10000>;
533 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
534 interrupt-names = "macirq";
535 resets = <&ccu RST_BUS_EMAC>;
536 reset-names = "stmmaceth";
537 clocks = <&ccu CLK_BUS_EMAC>;
538 clock-names = "stmmaceth";
539 status = "disabled";
540
541 mdio: mdio {
542 #address-cells = <1>;
543 #size-cells = <0>;
544 compatible = "snps,dwmac-mdio";
545 };
546
547 mdio-mux {
548 compatible = "allwinner,sun8i-h3-mdio-mux";
549 #address-cells = <1>;
550 #size-cells = <0>;
551
552 mdio-parent-bus = <&mdio>;
553 /* Only one MDIO is usable at the time */
554 internal_mdio: mdio@1 {
555 compatible = "allwinner,sun8i-h3-mdio-internal";
556 reg = <1>;
557 #address-cells = <1>;
558 #size-cells = <0>;
559
560 int_mii_phy: ethernet-phy@1 {
561 compatible = "ethernet-phy-ieee802.3-c22";
562 reg = <1>;
563 clocks = <&ccu CLK_BUS_EPHY>;
564 resets = <&ccu RST_BUS_EPHY>;
565 };
566 };
567
568 external_mdio: mdio@2 {
569 reg = <2>;
570 #address-cells = <1>;
571 #size-cells = <0>;
572 };
573 };
574 };
575
576 mbus: dram-controller@1c62000 {
577 /* compatible is in per SoC .dtsi file */
578 reg = <0x01c62000 0x1000>,
579 <0x01c63000 0x1000>;
580 reg-names = "mbus", "dram";
581 clocks = <&ccu CLK_MBUS>,
582 <&ccu CLK_DRAM>,
583 <&ccu CLK_BUS_DRAM>;
584 clock-names = "mbus", "dram", "bus";
585 #address-cells = <1>;
586 #size-cells = <1>;
587 dma-ranges = <0x00000000 0x40000000 0xc0000000>;
588 #interconnect-cells = <1>;
589 };
590
591 spi0: spi@1c68000 {
592 compatible = "allwinner,sun8i-h3-spi";
593 reg = <0x01c68000 0x1000>;
594 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
595 clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
596 clock-names = "ahb", "mod";
597 dmas = <&dma 23>, <&dma 23>;
598 dma-names = "rx", "tx";
599 pinctrl-names = "default";
600 pinctrl-0 = <&spi0_pins>;
601 resets = <&ccu RST_BUS_SPI0>;
602 status = "disabled";
603 #address-cells = <1>;
604 #size-cells = <0>;
605 };
606
607 spi1: spi@1c69000 {
608 compatible = "allwinner,sun8i-h3-spi";
609 reg = <0x01c69000 0x1000>;
610 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
611 clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
612 clock-names = "ahb", "mod";
613 dmas = <&dma 24>, <&dma 24>;
614 dma-names = "rx", "tx";
615 pinctrl-names = "default";
616 pinctrl-0 = <&spi1_pins>;
617 resets = <&ccu RST_BUS_SPI1>;
618 status = "disabled";
619 #address-cells = <1>;
620 #size-cells = <0>;
621 };
622
623 wdt0: watchdog@1c20ca0 {
624 compatible = "allwinner,sun6i-a31-wdt";
625 reg = <0x01c20ca0 0x20>;
626 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
627 clocks = <&osc24M>;
628 };
629
630 spdif: spdif@1c21000 {
631 #sound-dai-cells = <0>;
632 compatible = "allwinner,sun8i-h3-spdif";
633 reg = <0x01c21000 0x400>;
634 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
635 clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
636 resets = <&ccu RST_BUS_SPDIF>;
637 clock-names = "apb", "spdif";
638 dmas = <&dma 2>;
639 dma-names = "tx";
640 status = "disabled";
641 };
642
643 pwm: pwm@1c21400 {
644 compatible = "allwinner,sun8i-h3-pwm";
645 reg = <0x01c21400 0x8>;
646 clocks = <&osc24M>;
647 #pwm-cells = <3>;
648 status = "disabled";
649 };
650
651 i2s0: i2s@1c22000 {
652 #sound-dai-cells = <0>;
653 compatible = "allwinner,sun8i-h3-i2s";
654 reg = <0x01c22000 0x400>;
655 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
656 clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
657 clock-names = "apb", "mod";
658 dmas = <&dma 3>, <&dma 3>;
659 resets = <&ccu RST_BUS_I2S0>;
660 dma-names = "rx", "tx";
661 status = "disabled";
662 };
663
664 i2s1: i2s@1c22400 {
665 #sound-dai-cells = <0>;
666 compatible = "allwinner,sun8i-h3-i2s";
667 reg = <0x01c22400 0x400>;
668 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
669 clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
670 clock-names = "apb", "mod";
671 dmas = <&dma 4>, <&dma 4>;
672 resets = <&ccu RST_BUS_I2S1>;
673 dma-names = "rx", "tx";
674 status = "disabled";
675 };
676
677 i2s2: i2s@1c22800 {
678 #sound-dai-cells = <0>;
679 compatible = "allwinner,sun8i-h3-i2s";
680 reg = <0x01c22800 0x400>;
681 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
682 clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
683 clock-names = "apb", "mod";
684 dmas = <&dma 27>;
685 resets = <&ccu RST_BUS_I2S2>;
686 dma-names = "tx";
687 status = "disabled";
688 };
689
690 codec: codec@1c22c00 {
691 #sound-dai-cells = <0>;
692 compatible = "allwinner,sun8i-h3-codec";
693 reg = <0x01c22c00 0x400>;
694 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
695 clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
696 clock-names = "apb", "codec";
697 resets = <&ccu RST_BUS_CODEC>;
698 dmas = <&dma 15>, <&dma 15>;
699 dma-names = "rx", "tx";
700 allwinner,codec-analog-controls = <&codec_analog>;
701 status = "disabled";
702 };
703
704 uart0: serial@1c28000 {
705 compatible = "snps,dw-apb-uart";
706 reg = <0x01c28000 0x400>;
707 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
708 reg-shift = <2>;
709 reg-io-width = <4>;
710 clocks = <&ccu CLK_BUS_UART0>;
711 resets = <&ccu RST_BUS_UART0>;
712 dmas = <&dma 6>, <&dma 6>;
713 dma-names = "rx", "tx";
714 status = "disabled";
715 };
716
717 uart1: serial@1c28400 {
718 compatible = "snps,dw-apb-uart";
719 reg = <0x01c28400 0x400>;
720 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
721 reg-shift = <2>;
722 reg-io-width = <4>;
723 clocks = <&ccu CLK_BUS_UART1>;
724 resets = <&ccu RST_BUS_UART1>;
725 dmas = <&dma 7>, <&dma 7>;
726 dma-names = "rx", "tx";
727 status = "disabled";
728 };
729
730 uart2: serial@1c28800 {
731 compatible = "snps,dw-apb-uart";
732 reg = <0x01c28800 0x400>;
733 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
734 reg-shift = <2>;
735 reg-io-width = <4>;
736 clocks = <&ccu CLK_BUS_UART2>;
737 resets = <&ccu RST_BUS_UART2>;
738 dmas = <&dma 8>, <&dma 8>;
739 dma-names = "rx", "tx";
740 status = "disabled";
741 };
742
743 uart3: serial@1c28c00 {
744 compatible = "snps,dw-apb-uart";
745 reg = <0x01c28c00 0x400>;
746 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
747 reg-shift = <2>;
748 reg-io-width = <4>;
749 clocks = <&ccu CLK_BUS_UART3>;
750 resets = <&ccu RST_BUS_UART3>;
751 dmas = <&dma 9>, <&dma 9>;
752 dma-names = "rx", "tx";
753 status = "disabled";
754 };
755
756 i2c0: i2c@1c2ac00 {
757 compatible = "allwinner,sun6i-a31-i2c";
758 reg = <0x01c2ac00 0x400>;
759 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
760 clocks = <&ccu CLK_BUS_I2C0>;
761 resets = <&ccu RST_BUS_I2C0>;
762 pinctrl-names = "default";
763 pinctrl-0 = <&i2c0_pins>;
764 status = "disabled";
765 #address-cells = <1>;
766 #size-cells = <0>;
767 };
768
769 i2c1: i2c@1c2b000 {
770 compatible = "allwinner,sun6i-a31-i2c";
771 reg = <0x01c2b000 0x400>;
772 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
773 clocks = <&ccu CLK_BUS_I2C1>;
774 resets = <&ccu RST_BUS_I2C1>;
775 pinctrl-names = "default";
776 pinctrl-0 = <&i2c1_pins>;
777 status = "disabled";
778 #address-cells = <1>;
779 #size-cells = <0>;
780 };
781
782 i2c2: i2c@1c2b400 {
783 compatible = "allwinner,sun6i-a31-i2c";
784 reg = <0x01c2b400 0x400>;
785 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
786 clocks = <&ccu CLK_BUS_I2C2>;
787 resets = <&ccu RST_BUS_I2C2>;
788 pinctrl-names = "default";
789 pinctrl-0 = <&i2c2_pins>;
790 status = "disabled";
791 #address-cells = <1>;
792 #size-cells = <0>;
793 };
794
795 gic: interrupt-controller@1c81000 {
796 compatible = "arm,gic-400";
797 reg = <0x01c81000 0x1000>,
798 <0x01c82000 0x2000>,
799 <0x01c84000 0x2000>,
800 <0x01c86000 0x2000>;
801 interrupt-controller;
802 #interrupt-cells = <3>;
803 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
804 };
805
806 csi: camera@1cb0000 {
807 compatible = "allwinner,sun8i-h3-csi";
808 reg = <0x01cb0000 0x1000>;
809 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
810 clocks = <&ccu CLK_BUS_CSI>,
811 <&ccu CLK_CSI_SCLK>,
812 <&ccu CLK_DRAM_CSI>;
813 clock-names = "bus", "mod", "ram";
814 resets = <&ccu RST_BUS_CSI>;
815 pinctrl-names = "default";
816 pinctrl-0 = <&csi_pins>;
817 status = "disabled";
818 };
819
820 hdmi: hdmi@1ee0000 {
821 compatible = "allwinner,sun8i-h3-dw-hdmi",
822 "allwinner,sun8i-a83t-dw-hdmi";
823 reg = <0x01ee0000 0x10000>;
824 reg-io-width = <1>;
825 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
826 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
827 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
828 clock-names = "iahb", "isfr", "tmds", "cec";
829 resets = <&ccu RST_BUS_HDMI1>;
830 reset-names = "ctrl";
831 phys = <&hdmi_phy>;
832 phy-names = "phy";
833 status = "disabled";
834
835 ports {
836 #address-cells = <1>;
837 #size-cells = <0>;
838
839 hdmi_in: port@0 {
840 reg = <0>;
841
842 hdmi_in_tcon0: endpoint {
843 remote-endpoint = <&tcon0_out_hdmi>;
844 };
845 };
846
847 hdmi_out: port@1 {
848 reg = <1>;
849 };
850 };
851 };
852
853 hdmi_phy: hdmi-phy@1ef0000 {
854 compatible = "allwinner,sun8i-h3-hdmi-phy";
855 reg = <0x01ef0000 0x10000>;
856 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
857 <&ccu CLK_PLL_VIDEO>;
858 clock-names = "bus", "mod", "pll-0";
859 resets = <&ccu RST_BUS_HDMI0>;
860 reset-names = "phy";
861 #phy-cells = <0>;
862 };
863
864 rtc: rtc@1f00000 {
865 /* compatible is in per SoC .dtsi file */
866 reg = <0x01f00000 0x400>;
867 interrupt-parent = <&r_intc>;
868 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
869 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
870 clock-output-names = "osc32k", "osc32k-out", "iosc";
871 clocks = <&osc32k>;
872 #clock-cells = <1>;
873 };
874
875 r_intc: interrupt-controller@1f00c00 {
876 compatible = "allwinner,sun8i-h3-r-intc",
877 "allwinner,sun6i-a31-r-intc";
878 interrupt-controller;
879 #interrupt-cells = <3>;
880 reg = <0x01f00c00 0x400>;
881 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
882 };
883
884 r_ccu: clock@1f01400 {
885 compatible = "allwinner,sun8i-h3-r-ccu";
886 reg = <0x01f01400 0x100>;
887 clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
888 <&ccu CLK_PLL_PERIPH0>;
889 clock-names = "hosc", "losc", "iosc", "pll-periph";
890 #clock-cells = <1>;
891 #reset-cells = <1>;
892 };
893
894 codec_analog: codec-analog@1f015c0 {
895 compatible = "allwinner,sun8i-h3-codec-analog";
896 reg = <0x01f015c0 0x4>;
897 };
898
899 ir: ir@1f02000 {
900 compatible = "allwinner,sun6i-a31-ir";
901 clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
902 clock-names = "apb", "ir";
903 resets = <&r_ccu RST_APB0_IR>;
904 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
905 reg = <0x01f02000 0x400>;
906 status = "disabled";
907 };
908
909 r_i2c: i2c@1f02400 {
910 compatible = "allwinner,sun6i-a31-i2c";
911 reg = <0x01f02400 0x400>;
912 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
913 pinctrl-names = "default";
914 pinctrl-0 = <&r_i2c_pins>;
915 clocks = <&r_ccu CLK_APB0_I2C>;
916 resets = <&r_ccu RST_APB0_I2C>;
917 status = "disabled";
918 #address-cells = <1>;
919 #size-cells = <0>;
920 };
921
922 r_uart: serial@1f02800 {
923 compatible = "snps,dw-apb-uart";
924 reg = <0x01f02800 0x400>;
925 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
926 reg-shift = <2>;
927 reg-io-width = <4>;
928 clocks = <&r_ccu CLK_APB0_UART>;
929 resets = <&r_ccu RST_APB0_UART>;
930 pinctrl-names = "default";
931 pinctrl-0 = <&r_uart_pins>;
932 status = "disabled";
933 };
934
935 r_pio: pinctrl@1f02c00 {
936 compatible = "allwinner,sun8i-h3-r-pinctrl";
937 reg = <0x01f02c00 0x400>;
938 interrupt-parent = <&r_intc>;
939 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
940 clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
941 <&rtc CLK_OSC32K>;
942 clock-names = "apb", "hosc", "losc";
943 gpio-controller;
944 #gpio-cells = <3>;
945 interrupt-controller;
946 #interrupt-cells = <3>;
947
948 r_ir_rx_pin: r-ir-rx-pin {
949 pins = "PL11";
950 function = "s_cir_rx";
951 };
952
953 r_i2c_pins: r-i2c-pins {
954 pins = "PL0", "PL1";
955 function = "s_i2c";
956 };
957
958 r_pwm_pin: r-pwm-pin {
959 pins = "PL10";
960 function = "s_pwm";
961 };
962
963 r_uart_pins: r-uart-pins {
964 pins = "PL2", "PL3";
965 function = "s_uart";
966 };
967 };
968
969 r_pwm: pwm@1f03800 {
970 compatible = "allwinner,sun8i-h3-pwm";
971 reg = <0x01f03800 0x8>;
972 pinctrl-names = "default";
973 pinctrl-0 = <&r_pwm_pin>;
974 clocks = <&osc24M>;
975 #pwm-cells = <3>;
976 status = "disabled";
977 };
978 };
979};
1/*
2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43#include <dt-bindings/clock/sun8i-de2.h>
44#include <dt-bindings/clock/sun8i-h3-ccu.h>
45#include <dt-bindings/clock/sun8i-r-ccu.h>
46#include <dt-bindings/interrupt-controller/arm-gic.h>
47#include <dt-bindings/reset/sun8i-de2.h>
48#include <dt-bindings/reset/sun8i-h3-ccu.h>
49#include <dt-bindings/reset/sun8i-r-ccu.h>
50
51/ {
52 interrupt-parent = <&gic>;
53 #address-cells = <1>;
54 #size-cells = <1>;
55
56 chosen {
57 #address-cells = <1>;
58 #size-cells = <1>;
59 ranges;
60
61 framebuffer-hdmi {
62 compatible = "allwinner,simple-framebuffer",
63 "simple-framebuffer";
64 allwinner,pipeline = "mixer0-lcd0-hdmi";
65 clocks = <&display_clocks CLK_MIXER0>,
66 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
67 status = "disabled";
68 };
69
70 framebuffer-tve {
71 compatible = "allwinner,simple-framebuffer",
72 "simple-framebuffer";
73 allwinner,pipeline = "mixer1-lcd1-tve";
74 clocks = <&display_clocks CLK_MIXER1>,
75 <&ccu CLK_TVE>;
76 status = "disabled";
77 };
78 };
79
80 clocks {
81 #address-cells = <1>;
82 #size-cells = <1>;
83 ranges;
84
85 osc24M: osc24M_clk {
86 #clock-cells = <0>;
87 compatible = "fixed-clock";
88 clock-frequency = <24000000>;
89 clock-accuracy = <50000>;
90 clock-output-names = "osc24M";
91 };
92
93 osc32k: osc32k_clk {
94 #clock-cells = <0>;
95 compatible = "fixed-clock";
96 clock-frequency = <32768>;
97 clock-accuracy = <50000>;
98 clock-output-names = "ext_osc32k";
99 };
100 };
101
102 de: display-engine {
103 compatible = "allwinner,sun8i-h3-display-engine";
104 allwinner,pipelines = <&mixer0>;
105 status = "disabled";
106 };
107
108 soc {
109 compatible = "simple-bus";
110 #address-cells = <1>;
111 #size-cells = <1>;
112 ranges;
113
114 display_clocks: clock@1000000 {
115 /* compatible is in per SoC .dtsi file */
116 reg = <0x01000000 0x100000>;
117 clocks = <&ccu CLK_BUS_DE>,
118 <&ccu CLK_DE>;
119 clock-names = "bus",
120 "mod";
121 resets = <&ccu RST_BUS_DE>;
122 #clock-cells = <1>;
123 #reset-cells = <1>;
124 };
125
126 mixer0: mixer@1100000 {
127 compatible = "allwinner,sun8i-h3-de2-mixer-0";
128 reg = <0x01100000 0x100000>;
129 clocks = <&display_clocks CLK_BUS_MIXER0>,
130 <&display_clocks CLK_MIXER0>;
131 clock-names = "bus",
132 "mod";
133 resets = <&display_clocks RST_MIXER0>;
134
135 ports {
136 #address-cells = <1>;
137 #size-cells = <0>;
138
139 mixer0_out: port@1 {
140 reg = <1>;
141
142 mixer0_out_tcon0: endpoint {
143 remote-endpoint = <&tcon0_in_mixer0>;
144 };
145 };
146 };
147 };
148
149 dma: dma-controller@1c02000 {
150 compatible = "allwinner,sun8i-h3-dma";
151 reg = <0x01c02000 0x1000>;
152 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
153 clocks = <&ccu CLK_BUS_DMA>;
154 resets = <&ccu RST_BUS_DMA>;
155 #dma-cells = <1>;
156 };
157
158 tcon0: lcd-controller@1c0c000 {
159 compatible = "allwinner,sun8i-h3-tcon-tv",
160 "allwinner,sun8i-a83t-tcon-tv";
161 reg = <0x01c0c000 0x1000>;
162 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
163 clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
164 clock-names = "ahb", "tcon-ch1";
165 resets = <&ccu RST_BUS_TCON0>;
166 reset-names = "lcd";
167
168 ports {
169 #address-cells = <1>;
170 #size-cells = <0>;
171
172 tcon0_in: port@0 {
173 reg = <0>;
174
175 tcon0_in_mixer0: endpoint {
176 remote-endpoint = <&mixer0_out_tcon0>;
177 };
178 };
179
180 tcon0_out: port@1 {
181 #address-cells = <1>;
182 #size-cells = <0>;
183 reg = <1>;
184
185 tcon0_out_hdmi: endpoint@1 {
186 reg = <1>;
187 remote-endpoint = <&hdmi_in_tcon0>;
188 };
189 };
190 };
191 };
192
193 mmc0: mmc@1c0f000 {
194 /* compatible and clocks are in per SoC .dtsi file */
195 reg = <0x01c0f000 0x1000>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&mmc0_pins>;
198 resets = <&ccu RST_BUS_MMC0>;
199 reset-names = "ahb";
200 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
201 status = "disabled";
202 #address-cells = <1>;
203 #size-cells = <0>;
204 };
205
206 mmc1: mmc@1c10000 {
207 /* compatible and clocks are in per SoC .dtsi file */
208 reg = <0x01c10000 0x1000>;
209 pinctrl-names = "default";
210 pinctrl-0 = <&mmc1_pins>;
211 resets = <&ccu RST_BUS_MMC1>;
212 reset-names = "ahb";
213 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
214 status = "disabled";
215 #address-cells = <1>;
216 #size-cells = <0>;
217 };
218
219 mmc2: mmc@1c11000 {
220 /* compatible and clocks are in per SoC .dtsi file */
221 reg = <0x01c11000 0x1000>;
222 resets = <&ccu RST_BUS_MMC2>;
223 reset-names = "ahb";
224 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
225 status = "disabled";
226 #address-cells = <1>;
227 #size-cells = <0>;
228 };
229
230 sid: eeprom@1c14000 {
231 /* compatible is in per SoC .dtsi file */
232 reg = <0x1c14000 0x400>;
233 };
234
235 usb_otg: usb@1c19000 {
236 compatible = "allwinner,sun8i-h3-musb";
237 reg = <0x01c19000 0x400>;
238 clocks = <&ccu CLK_BUS_OTG>;
239 resets = <&ccu RST_BUS_OTG>;
240 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
241 interrupt-names = "mc";
242 phys = <&usbphy 0>;
243 phy-names = "usb";
244 extcon = <&usbphy 0>;
245 dr_mode = "otg";
246 status = "disabled";
247 };
248
249 usbphy: phy@1c19400 {
250 compatible = "allwinner,sun8i-h3-usb-phy";
251 reg = <0x01c19400 0x2c>,
252 <0x01c1a800 0x4>,
253 <0x01c1b800 0x4>,
254 <0x01c1c800 0x4>,
255 <0x01c1d800 0x4>;
256 reg-names = "phy_ctrl",
257 "pmu0",
258 "pmu1",
259 "pmu2",
260 "pmu3";
261 clocks = <&ccu CLK_USB_PHY0>,
262 <&ccu CLK_USB_PHY1>,
263 <&ccu CLK_USB_PHY2>,
264 <&ccu CLK_USB_PHY3>;
265 clock-names = "usb0_phy",
266 "usb1_phy",
267 "usb2_phy",
268 "usb3_phy";
269 resets = <&ccu RST_USB_PHY0>,
270 <&ccu RST_USB_PHY1>,
271 <&ccu RST_USB_PHY2>,
272 <&ccu RST_USB_PHY3>;
273 reset-names = "usb0_reset",
274 "usb1_reset",
275 "usb2_reset",
276 "usb3_reset";
277 status = "disabled";
278 #phy-cells = <1>;
279 };
280
281 ehci0: usb@1c1a000 {
282 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
283 reg = <0x01c1a000 0x100>;
284 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
285 clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
286 resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
287 status = "disabled";
288 };
289
290 ohci0: usb@1c1a400 {
291 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
292 reg = <0x01c1a400 0x100>;
293 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
294 clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
295 <&ccu CLK_USB_OHCI0>;
296 resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
297 status = "disabled";
298 };
299
300 ehci1: usb@1c1b000 {
301 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
302 reg = <0x01c1b000 0x100>;
303 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
304 clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
305 resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
306 phys = <&usbphy 1>;
307 phy-names = "usb";
308 status = "disabled";
309 };
310
311 ohci1: usb@1c1b400 {
312 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
313 reg = <0x01c1b400 0x100>;
314 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
315 clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
316 <&ccu CLK_USB_OHCI1>;
317 resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
318 phys = <&usbphy 1>;
319 phy-names = "usb";
320 status = "disabled";
321 };
322
323 ehci2: usb@1c1c000 {
324 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
325 reg = <0x01c1c000 0x100>;
326 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
327 clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
328 resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
329 phys = <&usbphy 2>;
330 phy-names = "usb";
331 status = "disabled";
332 };
333
334 ohci2: usb@1c1c400 {
335 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
336 reg = <0x01c1c400 0x100>;
337 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
338 clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
339 <&ccu CLK_USB_OHCI2>;
340 resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
341 phys = <&usbphy 2>;
342 phy-names = "usb";
343 status = "disabled";
344 };
345
346 ehci3: usb@1c1d000 {
347 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
348 reg = <0x01c1d000 0x100>;
349 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
350 clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
351 resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
352 phys = <&usbphy 3>;
353 phy-names = "usb";
354 status = "disabled";
355 };
356
357 ohci3: usb@1c1d400 {
358 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
359 reg = <0x01c1d400 0x100>;
360 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
361 clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
362 <&ccu CLK_USB_OHCI3>;
363 resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
364 phys = <&usbphy 3>;
365 phy-names = "usb";
366 status = "disabled";
367 };
368
369 ccu: clock@1c20000 {
370 /* compatible is in per SoC .dtsi file */
371 reg = <0x01c20000 0x400>;
372 clocks = <&osc24M>, <&rtc 0>;
373 clock-names = "hosc", "losc";
374 #clock-cells = <1>;
375 #reset-cells = <1>;
376 };
377
378 pio: pinctrl@1c20800 {
379 /* compatible is in per SoC .dtsi file */
380 reg = <0x01c20800 0x400>;
381 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
382 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
383 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
384 clock-names = "apb", "hosc", "losc";
385 gpio-controller;
386 #gpio-cells = <3>;
387 interrupt-controller;
388 #interrupt-cells = <3>;
389
390 csi_pins: csi-pins {
391 pins = "PE0", "PE2", "PE3", "PE4", "PE5",
392 "PE6", "PE7", "PE8", "PE9", "PE10",
393 "PE11";
394 function = "csi";
395 };
396
397 emac_rgmii_pins: emac-rgmii-pins {
398 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
399 "PD5", "PD7", "PD8", "PD9", "PD10",
400 "PD12", "PD13", "PD15", "PD16", "PD17";
401 function = "emac";
402 drive-strength = <40>;
403 };
404
405 i2c0_pins: i2c0-pins {
406 pins = "PA11", "PA12";
407 function = "i2c0";
408 };
409
410 i2c1_pins: i2c1-pins {
411 pins = "PA18", "PA19";
412 function = "i2c1";
413 };
414
415 i2c2_pins: i2c2-pins {
416 pins = "PE12", "PE13";
417 function = "i2c2";
418 };
419
420 mmc0_pins: mmc0-pins {
421 pins = "PF0", "PF1", "PF2", "PF3",
422 "PF4", "PF5";
423 function = "mmc0";
424 drive-strength = <30>;
425 bias-pull-up;
426 };
427
428 mmc1_pins: mmc1-pins {
429 pins = "PG0", "PG1", "PG2", "PG3",
430 "PG4", "PG5";
431 function = "mmc1";
432 drive-strength = <30>;
433 bias-pull-up;
434 };
435
436 mmc2_8bit_pins: mmc2-8bit-pins {
437 pins = "PC5", "PC6", "PC8",
438 "PC9", "PC10", "PC11",
439 "PC12", "PC13", "PC14",
440 "PC15", "PC16";
441 function = "mmc2";
442 drive-strength = <30>;
443 bias-pull-up;
444 };
445
446 spdif_tx_pin: spdif-tx-pin {
447 pins = "PA17";
448 function = "spdif";
449 };
450
451 spi0_pins: spi0-pins {
452 pins = "PC0", "PC1", "PC2", "PC3";
453 function = "spi0";
454 };
455
456 spi1_pins: spi1-pins {
457 pins = "PA15", "PA16", "PA14", "PA13";
458 function = "spi1";
459 };
460
461 uart0_pa_pins: uart0-pa-pins {
462 pins = "PA4", "PA5";
463 function = "uart0";
464 };
465
466 uart1_pins: uart1-pins {
467 pins = "PG6", "PG7";
468 function = "uart1";
469 };
470
471 uart1_rts_cts_pins: uart1-rts-cts-pins {
472 pins = "PG8", "PG9";
473 function = "uart1";
474 };
475
476 uart2_pins: uart2-pins {
477 pins = "PA0", "PA1";
478 function = "uart2";
479 };
480
481 uart3_pins: uart3-pins {
482 pins = "PA13", "PA14";
483 function = "uart3";
484 };
485
486 uart3_rts_cts_pins: uart3-rts-cts-pins {
487 pins = "PA15", "PA16";
488 function = "uart3";
489 };
490 };
491
492 timer@1c20c00 {
493 compatible = "allwinner,sun8i-a23-timer";
494 reg = <0x01c20c00 0xa0>;
495 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
496 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
497 clocks = <&osc24M>;
498 };
499
500 emac: ethernet@1c30000 {
501 compatible = "allwinner,sun8i-h3-emac";
502 syscon = <&syscon>;
503 reg = <0x01c30000 0x10000>;
504 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
505 interrupt-names = "macirq";
506 resets = <&ccu RST_BUS_EMAC>;
507 reset-names = "stmmaceth";
508 clocks = <&ccu CLK_BUS_EMAC>;
509 clock-names = "stmmaceth";
510 status = "disabled";
511
512 mdio: mdio {
513 #address-cells = <1>;
514 #size-cells = <0>;
515 compatible = "snps,dwmac-mdio";
516 };
517
518 mdio-mux {
519 compatible = "allwinner,sun8i-h3-mdio-mux";
520 #address-cells = <1>;
521 #size-cells = <0>;
522
523 mdio-parent-bus = <&mdio>;
524 /* Only one MDIO is usable at the time */
525 internal_mdio: mdio@1 {
526 compatible = "allwinner,sun8i-h3-mdio-internal";
527 reg = <1>;
528 #address-cells = <1>;
529 #size-cells = <0>;
530
531 int_mii_phy: ethernet-phy@1 {
532 compatible = "ethernet-phy-ieee802.3-c22";
533 reg = <1>;
534 clocks = <&ccu CLK_BUS_EPHY>;
535 resets = <&ccu RST_BUS_EPHY>;
536 };
537 };
538
539 external_mdio: mdio@2 {
540 reg = <2>;
541 #address-cells = <1>;
542 #size-cells = <0>;
543 };
544 };
545 };
546
547 spi0: spi@1c68000 {
548 compatible = "allwinner,sun8i-h3-spi";
549 reg = <0x01c68000 0x1000>;
550 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
551 clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
552 clock-names = "ahb", "mod";
553 dmas = <&dma 23>, <&dma 23>;
554 dma-names = "rx", "tx";
555 pinctrl-names = "default";
556 pinctrl-0 = <&spi0_pins>;
557 resets = <&ccu RST_BUS_SPI0>;
558 status = "disabled";
559 #address-cells = <1>;
560 #size-cells = <0>;
561 };
562
563 spi1: spi@1c69000 {
564 compatible = "allwinner,sun8i-h3-spi";
565 reg = <0x01c69000 0x1000>;
566 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
567 clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
568 clock-names = "ahb", "mod";
569 dmas = <&dma 24>, <&dma 24>;
570 dma-names = "rx", "tx";
571 pinctrl-names = "default";
572 pinctrl-0 = <&spi1_pins>;
573 resets = <&ccu RST_BUS_SPI1>;
574 status = "disabled";
575 #address-cells = <1>;
576 #size-cells = <0>;
577 };
578
579 wdt0: watchdog@1c20ca0 {
580 compatible = "allwinner,sun6i-a31-wdt";
581 reg = <0x01c20ca0 0x20>;
582 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
583 clocks = <&osc24M>;
584 };
585
586 spdif: spdif@1c21000 {
587 #sound-dai-cells = <0>;
588 compatible = "allwinner,sun8i-h3-spdif";
589 reg = <0x01c21000 0x400>;
590 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
591 clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
592 resets = <&ccu RST_BUS_SPDIF>;
593 clock-names = "apb", "spdif";
594 dmas = <&dma 2>;
595 dma-names = "tx";
596 status = "disabled";
597 };
598
599 pwm: pwm@1c21400 {
600 compatible = "allwinner,sun8i-h3-pwm";
601 reg = <0x01c21400 0x8>;
602 clocks = <&osc24M>;
603 #pwm-cells = <3>;
604 status = "disabled";
605 };
606
607 i2s0: i2s@1c22000 {
608 #sound-dai-cells = <0>;
609 compatible = "allwinner,sun8i-h3-i2s";
610 reg = <0x01c22000 0x400>;
611 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
612 clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
613 clock-names = "apb", "mod";
614 dmas = <&dma 3>, <&dma 3>;
615 resets = <&ccu RST_BUS_I2S0>;
616 dma-names = "rx", "tx";
617 status = "disabled";
618 };
619
620 i2s1: i2s@1c22400 {
621 #sound-dai-cells = <0>;
622 compatible = "allwinner,sun8i-h3-i2s";
623 reg = <0x01c22400 0x400>;
624 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
625 clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
626 clock-names = "apb", "mod";
627 dmas = <&dma 4>, <&dma 4>;
628 resets = <&ccu RST_BUS_I2S1>;
629 dma-names = "rx", "tx";
630 status = "disabled";
631 };
632
633 codec: codec@1c22c00 {
634 #sound-dai-cells = <0>;
635 compatible = "allwinner,sun8i-h3-codec";
636 reg = <0x01c22c00 0x400>;
637 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
638 clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
639 clock-names = "apb", "codec";
640 resets = <&ccu RST_BUS_CODEC>;
641 dmas = <&dma 15>, <&dma 15>;
642 dma-names = "rx", "tx";
643 allwinner,codec-analog-controls = <&codec_analog>;
644 status = "disabled";
645 };
646
647 uart0: serial@1c28000 {
648 compatible = "snps,dw-apb-uart";
649 reg = <0x01c28000 0x400>;
650 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
651 reg-shift = <2>;
652 reg-io-width = <4>;
653 clocks = <&ccu CLK_BUS_UART0>;
654 resets = <&ccu RST_BUS_UART0>;
655 dmas = <&dma 6>, <&dma 6>;
656 dma-names = "rx", "tx";
657 status = "disabled";
658 };
659
660 uart1: serial@1c28400 {
661 compatible = "snps,dw-apb-uart";
662 reg = <0x01c28400 0x400>;
663 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
664 reg-shift = <2>;
665 reg-io-width = <4>;
666 clocks = <&ccu CLK_BUS_UART1>;
667 resets = <&ccu RST_BUS_UART1>;
668 dmas = <&dma 7>, <&dma 7>;
669 dma-names = "rx", "tx";
670 status = "disabled";
671 };
672
673 uart2: serial@1c28800 {
674 compatible = "snps,dw-apb-uart";
675 reg = <0x01c28800 0x400>;
676 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
677 reg-shift = <2>;
678 reg-io-width = <4>;
679 clocks = <&ccu CLK_BUS_UART2>;
680 resets = <&ccu RST_BUS_UART2>;
681 dmas = <&dma 8>, <&dma 8>;
682 dma-names = "rx", "tx";
683 status = "disabled";
684 };
685
686 uart3: serial@1c28c00 {
687 compatible = "snps,dw-apb-uart";
688 reg = <0x01c28c00 0x400>;
689 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
690 reg-shift = <2>;
691 reg-io-width = <4>;
692 clocks = <&ccu CLK_BUS_UART3>;
693 resets = <&ccu RST_BUS_UART3>;
694 dmas = <&dma 9>, <&dma 9>;
695 dma-names = "rx", "tx";
696 status = "disabled";
697 };
698
699 i2c0: i2c@1c2ac00 {
700 compatible = "allwinner,sun6i-a31-i2c";
701 reg = <0x01c2ac00 0x400>;
702 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
703 clocks = <&ccu CLK_BUS_I2C0>;
704 resets = <&ccu RST_BUS_I2C0>;
705 pinctrl-names = "default";
706 pinctrl-0 = <&i2c0_pins>;
707 status = "disabled";
708 #address-cells = <1>;
709 #size-cells = <0>;
710 };
711
712 i2c1: i2c@1c2b000 {
713 compatible = "allwinner,sun6i-a31-i2c";
714 reg = <0x01c2b000 0x400>;
715 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
716 clocks = <&ccu CLK_BUS_I2C1>;
717 resets = <&ccu RST_BUS_I2C1>;
718 pinctrl-names = "default";
719 pinctrl-0 = <&i2c1_pins>;
720 status = "disabled";
721 #address-cells = <1>;
722 #size-cells = <0>;
723 };
724
725 i2c2: i2c@1c2b400 {
726 compatible = "allwinner,sun6i-a31-i2c";
727 reg = <0x01c2b400 0x400>;
728 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
729 clocks = <&ccu CLK_BUS_I2C2>;
730 resets = <&ccu RST_BUS_I2C2>;
731 pinctrl-names = "default";
732 pinctrl-0 = <&i2c2_pins>;
733 status = "disabled";
734 #address-cells = <1>;
735 #size-cells = <0>;
736 };
737
738 gic: interrupt-controller@1c81000 {
739 compatible = "arm,gic-400";
740 reg = <0x01c81000 0x1000>,
741 <0x01c82000 0x2000>,
742 <0x01c84000 0x2000>,
743 <0x01c86000 0x2000>;
744 interrupt-controller;
745 #interrupt-cells = <3>;
746 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
747 };
748
749 csi: camera@1cb0000 {
750 compatible = "allwinner,sun8i-h3-csi";
751 reg = <0x01cb0000 0x1000>;
752 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
753 clocks = <&ccu CLK_BUS_CSI>,
754 <&ccu CLK_CSI_SCLK>,
755 <&ccu CLK_DRAM_CSI>;
756 clock-names = "bus", "mod", "ram";
757 resets = <&ccu RST_BUS_CSI>;
758 pinctrl-names = "default";
759 pinctrl-0 = <&csi_pins>;
760 status = "disabled";
761 };
762
763 hdmi: hdmi@1ee0000 {
764 compatible = "allwinner,sun8i-h3-dw-hdmi",
765 "allwinner,sun8i-a83t-dw-hdmi";
766 reg = <0x01ee0000 0x10000>;
767 reg-io-width = <1>;
768 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
769 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
770 <&ccu CLK_HDMI>;
771 clock-names = "iahb", "isfr", "tmds";
772 resets = <&ccu RST_BUS_HDMI1>;
773 reset-names = "ctrl";
774 phys = <&hdmi_phy>;
775 phy-names = "phy";
776 status = "disabled";
777
778 ports {
779 #address-cells = <1>;
780 #size-cells = <0>;
781
782 hdmi_in: port@0 {
783 reg = <0>;
784
785 hdmi_in_tcon0: endpoint {
786 remote-endpoint = <&tcon0_out_hdmi>;
787 };
788 };
789
790 hdmi_out: port@1 {
791 reg = <1>;
792 };
793 };
794 };
795
796 hdmi_phy: hdmi-phy@1ef0000 {
797 compatible = "allwinner,sun8i-h3-hdmi-phy";
798 reg = <0x01ef0000 0x10000>;
799 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
800 <&ccu 6>;
801 clock-names = "bus", "mod", "pll-0";
802 resets = <&ccu RST_BUS_HDMI0>;
803 reset-names = "phy";
804 #phy-cells = <0>;
805 };
806
807 rtc: rtc@1f00000 {
808 /* compatible is in per SoC .dtsi file */
809 reg = <0x01f00000 0x400>;
810 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
811 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
812 clock-output-names = "osc32k", "osc32k-out", "iosc";
813 clocks = <&osc32k>;
814 #clock-cells = <1>;
815 };
816
817 r_ccu: clock@1f01400 {
818 compatible = "allwinner,sun8i-h3-r-ccu";
819 reg = <0x01f01400 0x100>;
820 clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
821 clock-names = "hosc", "losc", "iosc", "pll-periph";
822 #clock-cells = <1>;
823 #reset-cells = <1>;
824 };
825
826 codec_analog: codec-analog@1f015c0 {
827 compatible = "allwinner,sun8i-h3-codec-analog";
828 reg = <0x01f015c0 0x4>;
829 };
830
831 ir: ir@1f02000 {
832 compatible = "allwinner,sun6i-a31-ir";
833 clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
834 clock-names = "apb", "ir";
835 resets = <&r_ccu RST_APB0_IR>;
836 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
837 reg = <0x01f02000 0x400>;
838 status = "disabled";
839 };
840
841 r_i2c: i2c@1f02400 {
842 compatible = "allwinner,sun6i-a31-i2c";
843 reg = <0x01f02400 0x400>;
844 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
845 pinctrl-names = "default";
846 pinctrl-0 = <&r_i2c_pins>;
847 clocks = <&r_ccu CLK_APB0_I2C>;
848 resets = <&r_ccu RST_APB0_I2C>;
849 status = "disabled";
850 #address-cells = <1>;
851 #size-cells = <0>;
852 };
853
854 r_pio: pinctrl@1f02c00 {
855 compatible = "allwinner,sun8i-h3-r-pinctrl";
856 reg = <0x01f02c00 0x400>;
857 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
858 clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
859 clock-names = "apb", "hosc", "losc";
860 gpio-controller;
861 #gpio-cells = <3>;
862 interrupt-controller;
863 #interrupt-cells = <3>;
864
865 r_ir_rx_pin: r-ir-rx-pin {
866 pins = "PL11";
867 function = "s_cir_rx";
868 };
869
870 r_i2c_pins: r-i2c-pins {
871 pins = "PL0", "PL1";
872 function = "s_i2c";
873 };
874 };
875 };
876};