Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2011 ST-Ericsson AB
4 */
5
6/dts-v1/;
7#include "ste-db9500.dtsi"
8#include "ste-href-ab8500.dtsi"
9#include "ste-href-family-pinctrl.dtsi"
10
11/ {
12 model = "Calao Systems Snowball platform with device tree";
13 compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
14
15 memory {
16 device_type = "memory";
17 reg = <0x00000000 0x20000000>;
18 };
19
20 battery: battery {
21 compatible = "simple-battery";
22 battery-type = "lithium-ion-polymer";
23 };
24
25 thermal-zones {
26 battery-thermal {
27 /* This zone will be polled by the battery temperature code */
28 polling-delay = <0>;
29 polling-delay-passive = <0>;
30 thermal-sensors = <&bat_therm>;
31
32 trips {
33 battery-crit-hi {
34 temperature = <70000>;
35 hysteresis = <2000>;
36 type = "critical";
37 };
38 };
39 };
40 };
41
42 bat_therm: thermistor {
43 compatible = "murata,ncp18wb473";
44 io-channels = <&gpadc 0x02>; /* BatTemp */
45 pullup-uv = <1800000>;
46 pullup-ohm = <230000>;
47 pulldown-ohm = <0>;
48 #thermal-sensor-cells = <0>;
49 };
50
51 en_3v3_reg: en_3v3 {
52 compatible = "regulator-fixed";
53 regulator-name = "en-3v3-fixed-supply";
54 regulator-min-microvolt = <3300000>;
55 regulator-max-microvolt = <3300000>;
56 /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
57 gpio = <&ab8500_gpio 25 0x4>;
58 startup-delay-us = <5000>;
59 enable-active-high;
60 };
61
62 gpio_keys {
63 compatible = "gpio-keys";
64 #address-cells = <1>;
65 #size-cells = <0>;
66
67 button@1 {
68 debounce-interval = <50>;
69 wakeup-source;
70 linux,code = <2>;
71 label = "userpb";
72 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
73 };
74 button@2 {
75 debounce-interval = <50>;
76 wakeup-source;
77 linux,code = <3>;
78 label = "extkb1";
79 gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
80 };
81 button@3 {
82 debounce-interval = <50>;
83 wakeup-source;
84 linux,code = <4>;
85 label = "extkb2";
86 gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
87 };
88 button@4 {
89 debounce-interval = <50>;
90 wakeup-source;
91 linux,code = <5>;
92 label = "extkb3";
93 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
94 };
95 button@5 {
96 debounce-interval = <50>;
97 wakeup-source;
98 linux,code = <6>;
99 label = "extkb4";
100 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
101 };
102 };
103
104 leds {
105 compatible = "gpio-leds";
106 pinctrl-names = "default";
107 pinctrl-0 = <&gpioled_snowball_mode>;
108 used-led {
109 label = "user_led";
110 gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
111 default-state = "on";
112 linux,default-trigger = "heartbeat";
113 };
114 };
115
116 soc {
117 /* Name the GPIO muxed rails on the Snowball board */
118 gpio@8012e000 {
119 /* GPIOs 0 - 31 */
120 gpio-line-names = "", "", "", "", "", "", "", "",
121 "", "", "", "", "", "", "", "",
122 "", "", "", "", "", "", "", "",
123 "", "", "", "", "", "", "",
124 "AP_GPIO31";
125 };
126
127 gpio@8012e080 {
128 /* GPIOs 32 - 63 */
129 gpio-line-names = "USR PB", "", "", "", "", "", "", "",
130 "", "", "", "", "", "", "", "",
131 "", "", "", "", "", "", "", "",
132 "", "", "", "", "", "", "", "";
133 };
134
135 gpio@8000e000 {
136 /* GPIOs 64 - 95 */
137 gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
138 "", "", "", "", "", "", "", "",
139 "", "", "", "", "", "", "", "",
140 "", "", "", "", "", "", "", "";
141 };
142
143 gpio@8000e100 {
144 /* GPIOs 128 - 159 */
145 gpio-line-names = "", "", "", "", "", "", "", "",
146 "", "", "", "", "IRQ_LAN", "RSTn_LAN",
147 "USR_LED", "", "", "", "", "", "",
148 "", "", "AP_GPIO151", "AP_GPIO152",
149 "", "", "", "", "", "", "";
150 };
151
152 gpio@8000e180 {
153 /* GPIOs 160 - 191 */
154 gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
155 "ACCELEROMETER_INT1_RDY",
156 "ACCELEROMETER_INT2", "MAG_DRDY",
157 "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
158 "GYRO_INT", "UART_WAKE", "GBF_RESET",
159 "", "", "", "",
160 "", "", "", "", "", "", "", "",
161 "", "", "", "", "", "", "", "";
162 };
163
164 gpio@8011e000 {
165 /* GPIOs 192 - 223 */
166 gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
167 "", "", "", "", "", "", "", "", "",
168 "", "", "", "", "", "", "", "", "",
169 "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
170 "MMC_CD", "", "", "", "", "";
171 };
172
173 gpio@8011e080 {
174 /* GPIOs 224 - 255 */
175 gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
176 "", "", "", "", "", "", "", "",
177 "", "", "", "", "", "", "", "",
178 "", "", "", "", "", "", "", "";
179 };
180
181 msp0: msp@80123000 {
182 pinctrl-names = "default";
183 pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
184 status = "okay";
185 };
186
187 msp1: msp@80124000 {
188 pinctrl-names = "default";
189 pinctrl-0 = <&msp1txrx_a_1_default>;
190 status = "okay";
191 };
192
193 msp2: msp@80117000 {
194 pinctrl-names = "default";
195 pinctrl-0 = <&msp2_a_1_default>;
196 };
197
198 msp3: msp@80125000 {
199 status = "okay";
200 };
201
202 external-bus@50000000 {
203 status = "okay";
204
205 ethernet@0 {
206 compatible = "smsc,lan9115";
207 reg = <0 0x10000>;
208 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
209 interrupt-parent = <&gpio4>;
210 vdd33a-supply = <&en_3v3_reg>;
211 vddvario-supply = <&db8500_vape_reg>;
212 pinctrl-names = "default";
213 pinctrl-0 = <ð_snowball_mode>;
214
215 reg-shift = <1>;
216 reg-io-width = <2>;
217 smsc,force-internal-phy;
218 smsc,irq-active-high;
219 smsc,irq-push-pull;
220
221 clocks = <&prcc_pclk 3 0>;
222 };
223 };
224
225 /* ST6G3244ME level translator for 1.8/2.9 V */
226 vmmci: regulator-gpio {
227 compatible = "regulator-gpio";
228
229 /* GPIO228 SD_SEL */
230 gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
231 /* GPIO217 MMC_EN */
232 enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
233 enable-active-high;
234
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <2900000>;
237 regulator-name = "mmci-reg";
238 regulator-type = "voltage";
239
240 startup-delay-us = <100>;
241
242 states = <1800000 0x1
243 2900000 0x0>;
244 };
245
246 // External Micro SD slot
247 mmc@80126000 {
248 arm,primecell-periphid = <0x10480180>;
249 max-frequency = <100000000>;
250 bus-width = <4>;
251 cap-sd-highspeed;
252 cap-mmc-highspeed;
253 sd-uhs-sdr12;
254 sd-uhs-sdr25;
255 /* All direction control is used */
256 st,sig-dir-cmd;
257 st,sig-dir-dat0;
258 st,sig-dir-dat2;
259 st,sig-dir-dat31;
260 st,sig-pin-fbclk;
261 full-pwr-cycle;
262 vmmc-supply = <&ab8500_ldo_aux3_reg>;
263 vqmmc-supply = <&vmmci>;
264 pinctrl-names = "default", "sleep";
265 pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
266 pinctrl-1 = <&mc0_a_1_sleep>;
267
268 /* GPIO218 MMC_CD */
269 cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
270
271 status = "okay";
272 };
273
274 // WLAN SDIO channel
275 mmc@80118000 {
276 arm,primecell-periphid = <0x10480180>;
277 max-frequency = <100000000>;
278 bus-width = <4>;
279 pinctrl-names = "default", "sleep";
280 pinctrl-0 = <&mc1_a_1_default>;
281 pinctrl-1 = <&mc1_a_1_sleep>;
282
283 status = "okay";
284 };
285
286 // Unused PoP eMMC - register and put it to sleep by default */
287 mmc@80005000 {
288 arm,primecell-periphid = <0x10480180>;
289 pinctrl-names = "default";
290 pinctrl-0 = <&mc2_a_1_sleep>;
291
292 status = "okay";
293 };
294
295 // On-board eMMC
296 mmc@80114000 {
297 arm,primecell-periphid = <0x10480180>;
298 max-frequency = <100000000>;
299 bus-width = <8>;
300 cap-mmc-highspeed;
301 no-sdio;
302 no-sd;
303 vmmc-supply = <&ab8500_ldo_aux2_reg>;
304 pinctrl-names = "default", "sleep";
305 pinctrl-0 = <&mc4_a_1_default>;
306 pinctrl-1 = <&mc4_a_1_sleep>;
307
308 status = "okay";
309 };
310
311 uart@80120000 {
312 pinctrl-names = "default", "sleep";
313 pinctrl-0 = <&u0_a_1_default>;
314 pinctrl-1 = <&u0_a_1_sleep>;
315 status = "okay";
316 };
317
318 /* This UART is unused and thus left disabled */
319 uart@80121000 {
320 pinctrl-names = "default", "sleep";
321 pinctrl-0 = <&u1rxtx_a_1_default>;
322 pinctrl-1 = <&u1rxtx_a_1_sleep>;
323 };
324
325 uart@80007000 {
326 pinctrl-names = "default", "sleep";
327 pinctrl-0 = <&u2rxtx_c_1_default>;
328 pinctrl-1 = <&u2rxtx_c_1_sleep>;
329 status = "okay";
330 };
331
332 i2c@80004000 {
333 pinctrl-names = "default","sleep";
334 pinctrl-0 = <&i2c0_a_1_default>;
335 pinctrl-1 = <&i2c0_a_1_sleep>;
336 status = "okay";
337 };
338
339 i2c@80122000 {
340 pinctrl-names = "default","sleep";
341 pinctrl-0 = <&i2c1_b_2_default>;
342 pinctrl-1 = <&i2c1_b_2_sleep>;
343 status = "okay";
344 };
345
346 i2c@80128000 {
347 pinctrl-names = "default","sleep";
348 pinctrl-0 = <&i2c2_b_2_default>;
349 pinctrl-1 = <&i2c2_b_2_sleep>;
350 status = "okay";
351 lsm303dlh@18 {
352 /* Accelerometer */
353 compatible = "st,lsm303dlh-accel";
354 st,drdy-int-pin = <1>;
355 reg = <0x18>;
356 vdd-supply = <&ab8500_ldo_aux1_reg>;
357 vddio-supply = <&db8500_vsmps2_reg>;
358 pinctrl-names = "default";
359 pinctrl-0 = <&accel_snowball_mode>;
360 interrupt-parent = <&gpio5>;
361 interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
362 <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
363 };
364 lsm303dlh@1e {
365 /* Magnetometer */
366 compatible = "st,lsm303dlh-magn";
367 reg = <0x1e>;
368 vdd-supply = <&ab8500_ldo_aux1_reg>;
369 vddio-supply = <&db8500_vsmps2_reg>;
370 pinctrl-names = "default";
371 pinctrl-0 = <&magneto_snowball_mode>;
372 interrupt-parent = <&gpio5>;
373 interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
374 };
375 l3g4200d@68 {
376 /* Gyroscope */
377 compatible = "st,l3g4200d-gyro";
378 st,drdy-int-pin = <2>;
379 reg = <0x68>;
380 vdd-supply = <&ab8500_ldo_aux1_reg>;
381 vddio-supply = <&db8500_vsmps2_reg>;
382 pinctrl-names = "default";
383 pinctrl-0 = <&gyro_snowball_mode>;
384 interrupt-parent = <&gpio5>;
385 interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
386 <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
387 };
388 lsp001wm@5c {
389 /* Barometer/pressure sensor */
390 compatible = "st,lps001wp-press";
391 reg = <0x5c>;
392 vdd-supply = <&ab8500_ldo_aux1_reg>;
393 vddio-supply = <&db8500_vsmps2_reg>;
394 };
395 };
396
397 i2c@80110000 {
398 pinctrl-names = "default","sleep";
399 pinctrl-0 = <&i2c3_c_2_default>;
400 pinctrl-1 = <&i2c3_c_2_sleep>;
401 status = "okay";
402 };
403
404 spi@80002000 {
405 pinctrl-names = "default";
406 pinctrl-0 = <&ssp0_snowball_mode>;
407 status = "okay";
408 };
409
410 prcmu@80157000 {
411 ab8500 {
412 gpio {
413 /*
414 * AB8500 GPIOs are numbered starting from 1, so the first
415 * index 0 is what in the datasheet is called "GPIO1", and
416 * the second is "GPIO2" and so forth. Confusingly, the
417 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
418 * while later naming "GPIO4" as "PM_GPIO4".
419 */
420 gpio-line-names = "", /* AB8500 GPIO1 */
421 "PM_GPIO1", /* AB8500 GPIO2 */
422 "WLAN_CLK_REQ", /* AB8500 GPIO3 */
423 "PM_GPIO4", /* AB8500 GPIO4 */
424 "", "", "", "", "", "", "", "", "", "", "",
425 "EN_3V6", /* AB8500 GPIO16 */
426 "", "", "", "" ,"", "", "", "", "",
427 "EN_3V3", /* AB8500 GPIO26 */
428 "", "", "", "", "", "", "", "", "", "", "", "", "",
429 "PM_GPIO40", /* AB8500 GPIO40 */
430 "PM_GPIO41", /* AB8500 GPIO41 */
431 "PM_GPIO42"; /* AB8500 GPIO42 */
432 };
433
434 phy {
435 pinctrl-names = "default", "sleep";
436 pinctrl-0 = <&usb_a_1_default>;
437 pinctrl-1 = <&usb_a_1_sleep>;
438 };
439
440 ext_regulators: regulator-external {
441 ab8500_ext1_reg: ab8500_ext1 {
442 regulator-name = "ab8500-ext-supply1";
443 };
444
445 ab8500_ext2_reg_reg: ab8500_ext2 {
446 regulator-name = "ab8500-ext-supply2";
447 };
448
449 ab8500_ext3_reg_reg: ab8500_ext3 {
450 regulator-name = "ab8500-ext-supply3";
451 };
452 };
453
454 regulator {
455 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
456 regulator-name = "V-DISPLAY";
457 };
458
459 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
460 regulator-name = "V-eMMC1";
461 };
462
463 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
464 regulator-name = "V-MMC-SD";
465 };
466
467 ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
468 regulator-name = "V-INTCORE";
469 };
470
471 ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
472 regulator-name = "V-TVOUT";
473 };
474
475 ab8500_ldo_audio_reg: ab8500_ldo_audio {
476 regulator-name = "V-AUD";
477 };
478
479 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
480 regulator-name = "V-AMIC1";
481 };
482
483 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
484 regulator-name = "V-AMIC2";
485 };
486
487 ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
488 regulator-name = "V-DMIC";
489 };
490
491 ab8500_ldo_ana_reg: ab8500_ldo_ana {
492 regulator-name = "V-CSI/DSI";
493 };
494 };
495 };
496 };
497
498 pinctrl {
499 /*
500 * Set this up using hogs, as time goes by and as seems fit, these
501 * can be moved over to being controlled by respective device.
502 */
503 pinctrl-names = "default";
504 pinctrl-0 = <&gbf_snowball_mode>,
505 <&wlan_snowball_mode>;
506
507 ethernet {
508 /*
509 * Mux in "SM" which is used for the
510 * SMSC911x Ethernet adapter
511 */
512 eth_snowball_mode: eth_snowball {
513 snowball_mux {
514 function = "sm";
515 groups = "sm_b_1";
516 };
517 /* LAN IRQ pin */
518 snowball_cfg1 {
519 pins = "GPIO140_B11";
520 ste,config = <&in_nopull>;
521 };
522 /* LAN reset pin */
523 snowball_cfg2 {
524 pins = "GPIO141_C12";
525 ste,config = <&gpio_out_hi>;
526 };
527
528 };
529 };
530 sdi0 {
531 sdi0_default_mode: sdi0_default {
532 snowball_mux {
533 function = "mc0";
534 /* Add the DAT31 pin even if it is not really used */
535 groups = "mc0dat31dir_a_1";
536 };
537 snowball_cfg1 {
538 pins = "GPIO21_AB3"; /* DAT31DIR */
539 ste,config = <&out_hi>;
540 };
541 /* SD card detect GPIO pin, extend default state */
542 snowball_cfg2 {
543 pins = "GPIO218_AH11";
544 ste,config = <&gpio_in_pu>;
545 };
546 /* VMMCI level-shifter enable */
547 snowball_cfg3 {
548 pins = "GPIO217_AH12";
549 ste,config = <&gpio_out_hi>;
550 };
551 /* VMMCI level-shifter voltage select */
552 snowball_cfg4 {
553 pins = "GPIO228_AJ6";
554 ste,config = <&gpio_out_hi>;
555 };
556 };
557 };
558 ssp0 {
559 ssp0_snowball_mode: ssp0_snowball_default {
560 snowball_mux {
561 function = "ssp0";
562 groups = "ssp0_a_1";
563 };
564 snowball_cfg1 {
565 pins = "GPIO144_B13"; /* FRM */
566 ste,config = <&gpio_out_hi>;
567 };
568 snowball_cfg2 {
569 pins = "GPIO145_C13"; /* RXD */
570 ste,config = <&in_pd>;
571 };
572 snowball_cfg3 {
573 pins =
574 "GPIO146_D13", /* TXD */
575 "GPIO143_D12"; /* CLK */
576 ste,config = <&out_lo>;
577 };
578
579 };
580 };
581 gpio_led {
582 gpioled_snowball_mode: gpioled_default {
583 snowball_cfg1 {
584 pins = "GPIO142_C11";
585 ste,config = <&gpio_out_hi>;
586 };
587
588 };
589 };
590 accelerometer {
591 accel_snowball_mode: accel_snowball {
592 /* Accelerometer lines */
593 snowball_cfg1 {
594 pins =
595 "GPIO163_C20", /* ACCEL_IRQ1 */
596 "GPIO164_B21"; /* ACCEL_IRQ2 */
597 ste,config = <&gpio_in_pu>;
598 };
599 };
600 };
601 gyro {
602 gyro_snowball_mode: gyro_snowball {
603 snowball_cfg1 {
604 pins =
605 "GPIO166_A22", /* DRDY */
606 "GPIO169_D22"; /* INT */
607 ste,config = <&gpio_in_pu>;
608 };
609 };
610 };
611 magnetometer {
612 magneto_snowball_mode: magneto_snowball {
613 snowball_cfg1 {
614 pins = "GPIO165_C21"; /* MAG_DRDY */
615 ste,config = <&gpio_in_pu>;
616 };
617 };
618 };
619 gbf {
620 gbf_snowball_mode: gbf_snowball {
621 /*
622 * GBF (GPS, Bluetooth, FM-radio) interface,
623 * pull low to reset state
624 */
625 snowball_cfg1 {
626 pins = "GPIO171_D23"; /* GBF_ENA_RESET */
627 ste,config = <&gpio_out_lo>;
628 };
629 };
630 };
631 wlan {
632 wlan_snowball_mode: wlan_snowball {
633 /*
634 * Activate this mode with the WLAN chip.
635 * These are plain GPIO pins used by WLAN
636 */
637 snowball_cfg1 {
638 pins =
639 "GPIO161_D21", /* WLAN_PMU_EN */
640 "GPIO215_AH13"; /* WLAN_ENA */
641 ste,config = <&gpio_out_lo>;
642 };
643 snowball_cfg2 {
644 pins = "GPIO216_AG12"; /* WLAN_IRQ */
645 ste,config = <&gpio_in_pu>;
646 };
647 };
648 };
649 };
650
651 mcde@a0350000 {
652 pinctrl-names = "default", "sleep";
653 pinctrl-0 = <&lcd_default_mode>;
654 pinctrl-1 = <&lcd_sleep_mode>;
655 };
656 };
657};
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2011 ST-Ericsson AB
4 */
5
6/dts-v1/;
7#include "ste-dbx5x0.dtsi"
8#include "ste-href-ab8500.dtsi"
9#include "ste-href-family-pinctrl.dtsi"
10
11/ {
12 model = "Calao Systems Snowball platform with device tree";
13 compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
14
15 /* This stablilizes the serial port enumeration */
16 aliases {
17 serial0 = &ux500_serial0;
18 serial1 = &ux500_serial1;
19 serial2 = &ux500_serial2;
20 };
21
22 memory {
23 device_type = "memory";
24 reg = <0x00000000 0x20000000>;
25 };
26
27 en_3v3_reg: en_3v3 {
28 compatible = "regulator-fixed";
29 regulator-name = "en-3v3-fixed-supply";
30 regulator-min-microvolt = <3300000>;
31 regulator-max-microvolt = <3300000>;
32 /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
33 gpio = <&ab8500_gpio 25 0x4>;
34 startup-delay-us = <5000>;
35 enable-active-high;
36 };
37
38 gpio_keys {
39 compatible = "gpio-keys";
40 #address-cells = <1>;
41 #size-cells = <0>;
42
43 button@1 {
44 debounce-interval = <50>;
45 wakeup-source;
46 linux,code = <2>;
47 label = "userpb";
48 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
49 };
50 button@2 {
51 debounce-interval = <50>;
52 wakeup-source;
53 linux,code = <3>;
54 label = "extkb1";
55 gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
56 };
57 button@3 {
58 debounce-interval = <50>;
59 wakeup-source;
60 linux,code = <4>;
61 label = "extkb2";
62 gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
63 };
64 button@4 {
65 debounce-interval = <50>;
66 wakeup-source;
67 linux,code = <5>;
68 label = "extkb3";
69 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
70 };
71 button@5 {
72 debounce-interval = <50>;
73 wakeup-source;
74 linux,code = <6>;
75 label = "extkb4";
76 gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
77 };
78 };
79
80 leds {
81 compatible = "gpio-leds";
82 pinctrl-names = "default";
83 pinctrl-0 = <&gpioled_snowball_mode>;
84 used-led {
85 label = "user_led";
86 gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
87 default-state = "on";
88 linux,default-trigger = "heartbeat";
89 };
90 };
91
92 soc {
93 /* Name the GPIO muxed rails on the Snowball board */
94 gpio@8012e000 {
95 /* GPIOs 0 - 31 */
96 gpio-line-names = "", "", "", "", "", "", "", "",
97 "", "", "", "", "", "", "", "",
98 "", "", "", "", "", "", "", "",
99 "", "", "", "", "", "", "",
100 "AP_GPIO31";
101 };
102
103 gpio@8012e080 {
104 /* GPIOs 32 - 63 */
105 gpio-line-names = "USR PB", "", "", "", "", "", "", "",
106 "", "", "", "", "", "", "", "",
107 "", "", "", "", "", "", "", "",
108 "", "", "", "", "", "", "", "";
109 };
110
111 gpio@8000e000 {
112 /* GPIOs 64 - 95 */
113 gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
114 "", "", "", "", "", "", "", "",
115 "", "", "", "", "", "", "", "",
116 "", "", "", "", "", "", "", "";
117 };
118
119 gpio@8000e100 {
120 /* GPIOs 128 - 159 */
121 gpio-line-names = "", "", "", "", "", "", "", "",
122 "", "", "", "", "IRQ_LAN", "RSTn_LAN",
123 "USR_LED", "", "", "", "", "", "",
124 "", "", "AP_GPIO151", "AP_GPIO152",
125 "", "", "", "", "", "", "";
126 };
127
128 gpio@8000e180 {
129 /* GPIOs 160 - 191 */
130 gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
131 "ACCELEROMETER_INT1_RDY",
132 "ACCELEROMETER_INT2", "MAG_DRDY",
133 "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
134 "GYRO_INT", "UART_WAKE", "GBF_RESET",
135 "", "", "", "",
136 "", "", "", "", "", "", "", "",
137 "", "", "", "", "", "", "", "";
138 };
139
140 gpio@8011e000 {
141 /* GPIOs 192 - 223 */
142 gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
143 "", "", "", "", "", "", "", "", "",
144 "", "", "", "", "", "", "", "", "",
145 "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
146 "MMC_CD", "", "", "", "", "";
147 };
148
149 gpio@8011e080 {
150 /* GPIOs 224 - 255 */
151 gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
152 "", "", "", "", "", "", "", "",
153 "", "", "", "", "", "", "", "",
154 "", "", "", "", "", "", "", "";
155 };
156
157 msp0: msp@80123000 {
158 pinctrl-names = "default";
159 pinctrl-0 = <&msp0_default_mode>;
160 status = "okay";
161 };
162
163 msp1: msp@80124000 {
164 pinctrl-names = "default";
165 pinctrl-0 = <&msp1_default_mode>;
166 status = "okay";
167 };
168
169 msp2: msp@80117000 {
170 pinctrl-names = "default";
171 pinctrl-0 = <&msp2_default_mode>;
172 };
173
174 msp3: msp@80125000 {
175 status = "okay";
176 };
177
178 external-bus@50000000 {
179 status = "okay";
180
181 ethernet@0 {
182 compatible = "smsc,lan9115";
183 reg = <0 0x10000>;
184 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
185 interrupt-parent = <&gpio4>;
186 vdd33a-supply = <&en_3v3_reg>;
187 vddvario-supply = <&db8500_vape_reg>;
188 pinctrl-names = "default";
189 pinctrl-0 = <ð_snowball_mode>;
190
191 reg-shift = <1>;
192 reg-io-width = <2>;
193 smsc,force-internal-phy;
194 smsc,irq-active-high;
195 smsc,irq-push-pull;
196
197 clocks = <&prcc_pclk 3 0>;
198 };
199 };
200
201 /* ST6G3244ME level translator for 1.8/2.9 V */
202 vmmci: regulator-gpio {
203 compatible = "regulator-gpio";
204
205 /* GPIO228 SD_SEL */
206 gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
207 /* GPIO217 MMC_EN */
208 enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
209 enable-active-high;
210
211 regulator-min-microvolt = <1800000>;
212 regulator-max-microvolt = <2900000>;
213 regulator-name = "mmci-reg";
214 regulator-type = "voltage";
215
216 startup-delay-us = <100>;
217
218 states = <1800000 0x1
219 2900000 0x0>;
220 };
221
222 // External Micro SD slot
223 sdi0_per1@80126000 {
224 arm,primecell-periphid = <0x10480180>;
225 max-frequency = <100000000>;
226 bus-width = <4>;
227 cap-sd-highspeed;
228 cap-mmc-highspeed;
229 sd-uhs-sdr12;
230 sd-uhs-sdr25;
231 /* All direction control is used */
232 st,sig-dir-cmd;
233 st,sig-dir-dat0;
234 st,sig-dir-dat2;
235 st,sig-dir-dat31;
236 st,sig-pin-fbclk;
237 full-pwr-cycle;
238 vmmc-supply = <&ab8500_ldo_aux3_reg>;
239 vqmmc-supply = <&vmmci>;
240 pinctrl-names = "default", "sleep";
241 pinctrl-0 = <&sdi0_default_mode>;
242 pinctrl-1 = <&sdi0_sleep_mode>;
243
244 /* GPIO218 MMC_CD */
245 cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
246
247 status = "okay";
248 };
249
250 // WLAN SDIO channel
251 sdi1_per2@80118000 {
252 arm,primecell-periphid = <0x10480180>;
253 max-frequency = <100000000>;
254 bus-width = <4>;
255 pinctrl-names = "default", "sleep";
256 pinctrl-0 = <&sdi1_default_mode>;
257 pinctrl-1 = <&sdi1_sleep_mode>;
258
259 status = "okay";
260 };
261
262 // Unused PoP eMMC - register and put it to sleep by default */
263 sdi2_per3@80005000 {
264 arm,primecell-periphid = <0x10480180>;
265 pinctrl-names = "default";
266 pinctrl-0 = <&sdi2_sleep_mode>;
267
268 status = "okay";
269 };
270
271 // On-board eMMC
272 sdi4_per2@80114000 {
273 arm,primecell-periphid = <0x10480180>;
274 max-frequency = <100000000>;
275 bus-width = <8>;
276 cap-mmc-highspeed;
277 vmmc-supply = <&ab8500_ldo_aux2_reg>;
278 pinctrl-names = "default", "sleep";
279 pinctrl-0 = <&sdi4_default_mode>;
280 pinctrl-1 = <&sdi4_sleep_mode>;
281
282 status = "okay";
283 };
284
285 uart@80120000 {
286 pinctrl-names = "default", "sleep";
287 pinctrl-0 = <&uart0_default_mode>;
288 pinctrl-1 = <&uart0_sleep_mode>;
289 status = "okay";
290 };
291
292 /* This UART is unused and thus left disabled */
293 uart@80121000 {
294 pinctrl-names = "default", "sleep";
295 pinctrl-0 = <&uart1_default_mode>;
296 pinctrl-1 = <&uart1_sleep_mode>;
297 };
298
299 uart@80007000 {
300 pinctrl-names = "default", "sleep";
301 pinctrl-0 = <&uart2_default_mode>;
302 pinctrl-1 = <&uart2_sleep_mode>;
303 status = "okay";
304 };
305
306 i2c@80004000 {
307 pinctrl-names = "default","sleep";
308 pinctrl-0 = <&i2c0_default_mode>;
309 pinctrl-1 = <&i2c0_sleep_mode>;
310 };
311
312 i2c@80122000 {
313 pinctrl-names = "default","sleep";
314 pinctrl-0 = <&i2c1_default_mode>;
315 pinctrl-1 = <&i2c1_sleep_mode>;
316 };
317
318 i2c@80128000 {
319 pinctrl-names = "default","sleep";
320 pinctrl-0 = <&i2c2_default_mode>;
321 pinctrl-1 = <&i2c2_sleep_mode>;
322 lsm303dlh@18 {
323 /* Accelerometer */
324 compatible = "st,lsm303dlh-accel";
325 st,drdy-int-pin = <1>;
326 reg = <0x18>;
327 vdd-supply = <&ab8500_ldo_aux1_reg>;
328 vddio-supply = <&db8500_vsmps2_reg>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&accel_snowball_mode>;
331 interrupt-parent = <&gpio5>;
332 interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
333 <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
334 };
335 lsm303dlh@1e {
336 /* Magnetometer */
337 compatible = "st,lsm303dlh-magn";
338 reg = <0x1e>;
339 vdd-supply = <&ab8500_ldo_aux1_reg>;
340 vddio-supply = <&db8500_vsmps2_reg>;
341 pinctrl-names = "default";
342 pinctrl-0 = <&magneto_snowball_mode>;
343 interrupt-parent = <&gpio5>;
344 interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
345 };
346 l3g4200d@68 {
347 /* Gyroscope */
348 compatible = "st,l3g4200d-gyro";
349 st,drdy-int-pin = <2>;
350 reg = <0x68>;
351 vdd-supply = <&ab8500_ldo_aux1_reg>;
352 vddio-supply = <&db8500_vsmps2_reg>;
353 pinctrl-names = "default";
354 pinctrl-0 = <&gyro_snowball_mode>;
355 interrupt-parent = <&gpio5>;
356 interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
357 <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
358 };
359 lsp001wm@5c {
360 /* Barometer/pressure sensor */
361 compatible = "st,lps001wp-press";
362 reg = <0x5c>;
363 vdd-supply = <&ab8500_ldo_aux1_reg>;
364 vddio-supply = <&db8500_vsmps2_reg>;
365 };
366 };
367
368 i2c@80110000 {
369 pinctrl-names = "default","sleep";
370 pinctrl-0 = <&i2c3_default_mode>;
371 pinctrl-1 = <&i2c3_sleep_mode>;
372 };
373
374 spi@80002000 {
375 pinctrl-names = "default";
376 pinctrl-0 = <&ssp0_snowball_mode>;
377 };
378
379 prcmu@80157000 {
380 cpufreq {
381 status = "okay";
382 };
383
384 ab8500 {
385 ab8500-gpio {
386 /*
387 * AB8500 GPIOs are numbered starting from 1, so the first
388 * index 0 is what in the datasheet is called "GPIO1", and
389 * the second is "GPIO2" and so forth. Confusingly, the
390 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
391 * while later naming "GPIO4" as "PM_GPIO4".
392 */
393 gpio-line-names = "", /* AB8500 GPIO1 */
394 "PM_GPIO1", /* AB8500 GPIO2 */
395 "WLAN_CLK_REQ", /* AB8500 GPIO3 */
396 "PM_GPIO4", /* AB8500 GPIO4 */
397 "", "", "", "", "", "", "", "", "", "", "",
398 "EN_3V6", /* AB8500 GPIO16 */
399 "", "", "", "" ,"", "", "", "", "",
400 "EN_3V3", /* AB8500 GPIO26 */
401 "", "", "", "", "", "", "", "", "", "", "", "", "",
402 "PM_GPIO40", /* AB8500 GPIO40 */
403 "PM_GPIO41", /* AB8500 GPIO41 */
404 "PM_GPIO42"; /* AB8500 GPIO42 */
405 };
406
407 ab8500_usb {
408 pinctrl-names = "default", "sleep";
409 pinctrl-0 = <&musb_default_mode>;
410 pinctrl-1 = <&musb_sleep_mode>;
411 };
412
413 ext_regulators: ab8500-ext-regulators {
414 ab8500_ext1_reg: ab8500_ext1 {
415 regulator-name = "ab8500-ext-supply1";
416 };
417
418 ab8500_ext2_reg_reg: ab8500_ext2 {
419 regulator-name = "ab8500-ext-supply2";
420 };
421
422 ab8500_ext3_reg_reg: ab8500_ext3 {
423 regulator-name = "ab8500-ext-supply3";
424 };
425 };
426
427 ab8500-regulators {
428 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
429 regulator-name = "V-DISPLAY";
430 };
431
432 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
433 regulator-name = "V-eMMC1";
434 };
435
436 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
437 regulator-name = "V-MMC-SD";
438 };
439
440 ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
441 regulator-name = "V-INTCORE";
442 };
443
444 ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
445 regulator-name = "V-TVOUT";
446 };
447
448 ab8500_ldo_audio_reg: ab8500_ldo_audio {
449 regulator-name = "V-AUD";
450 };
451
452 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
453 regulator-name = "V-AMIC1";
454 };
455
456 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
457 regulator-name = "V-AMIC2";
458 };
459
460 ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
461 regulator-name = "V-DMIC";
462 };
463
464 ab8500_ldo_ana_reg: ab8500_ldo_ana {
465 regulator-name = "V-CSI/DSI";
466 };
467 };
468 };
469 };
470
471 pinctrl {
472 /*
473 * Set this up using hogs, as time goes by and as seems fit, these
474 * can be moved over to being controlled by respective device.
475 */
476 pinctrl-names = "default";
477 pinctrl-0 = <&gbf_snowball_mode>,
478 <&wlan_snowball_mode>;
479
480 ethernet {
481 /*
482 * Mux in "SM" which is used for the
483 * SMSC911x Ethernet adapter
484 */
485 eth_snowball_mode: eth_snowball {
486 snowball_mux {
487 function = "sm";
488 groups = "sm_b_1";
489 };
490 /* LAN IRQ pin */
491 snowball_cfg1 {
492 pins = "GPIO140_B11";
493 ste,config = <&in_nopull>;
494 };
495 /* LAN reset pin */
496 snowball_cfg2 {
497 pins = "GPIO141_C12";
498 ste,config = <&gpio_out_hi>;
499 };
500
501 };
502 };
503 sdi0 {
504 sdi0_default_mode: sdi0_default {
505 snowball_mux {
506 function = "mc0";
507 /* Add the DAT31 pin even if it is not really used */
508 groups = "mc0dat31dir_a_1";
509 };
510 snowball_cfg1 {
511 pins = "GPIO21_AB3"; /* DAT31DIR */
512 ste,config = <&out_hi>;
513 };
514 /* SD card detect GPIO pin, extend default state */
515 snowball_cfg2 {
516 pins = "GPIO218_AH11";
517 ste,config = <&gpio_in_pu>;
518 };
519 /* VMMCI level-shifter enable */
520 snowball_cfg3 {
521 pins = "GPIO217_AH12";
522 ste,config = <&gpio_out_hi>;
523 };
524 /* VMMCI level-shifter voltage select */
525 snowball_cfg4 {
526 pins = "GPIO228_AJ6";
527 ste,config = <&gpio_out_hi>;
528 };
529 };
530 };
531 ssp0 {
532 ssp0_snowball_mode: ssp0_snowball_default {
533 snowball_mux {
534 function = "ssp0";
535 groups = "ssp0_a_1";
536 };
537 snowball_cfg1 {
538 pins = "GPIO144_B13"; /* FRM */
539 ste,config = <&gpio_out_hi>;
540 };
541 snowball_cfg2 {
542 pins = "GPIO145_C13"; /* RXD */
543 ste,config = <&in_pd>;
544 };
545 snowball_cfg3 {
546 pins =
547 "GPIO146_D13", /* TXD */
548 "GPIO143_D12"; /* CLK */
549 ste,config = <&out_lo>;
550 };
551
552 };
553 };
554 gpio_led {
555 gpioled_snowball_mode: gpioled_default {
556 snowball_cfg1 {
557 pins = "GPIO142_C11";
558 ste,config = <&gpio_out_hi>;
559 };
560
561 };
562 };
563 accelerometer {
564 accel_snowball_mode: accel_snowball {
565 /* Accelerometer lines */
566 snowball_cfg1 {
567 pins =
568 "GPIO163_C20", /* ACCEL_IRQ1 */
569 "GPIO164_B21"; /* ACCEL_IRQ2 */
570 ste,config = <&gpio_in_pu>;
571 };
572 };
573 };
574 gyro {
575 gyro_snowball_mode: gyro_snowball {
576 snowball_cfg1 {
577 pins =
578 "GPIO166_A22", /* DRDY */
579 "GPIO169_D22"; /* INT */
580 ste,config = <&gpio_in_pu>;
581 };
582 };
583 };
584 magnetometer {
585 magneto_snowball_mode: magneto_snowball {
586 snowball_cfg1 {
587 pins = "GPIO165_C21"; /* MAG_DRDY */
588 ste,config = <&gpio_in_pu>;
589 };
590 };
591 };
592 gbf {
593 gbf_snowball_mode: gbf_snowball {
594 /*
595 * GBF (GPS, Bluetooth, FM-radio) interface,
596 * pull low to reset state
597 */
598 snowball_cfg1 {
599 pins = "GPIO171_D23"; /* GBF_ENA_RESET */
600 ste,config = <&gpio_out_lo>;
601 };
602 };
603 };
604 wlan {
605 wlan_snowball_mode: wlan_snowball {
606 /*
607 * Activate this mode with the WLAN chip.
608 * These are plain GPIO pins used by WLAN
609 */
610 snowball_cfg1 {
611 pins =
612 "GPIO161_D21", /* WLAN_PMU_EN */
613 "GPIO215_AH13"; /* WLAN_ENA */
614 ste,config = <&gpio_out_lo>;
615 };
616 snowball_cfg2 {
617 pins = "GPIO216_AG12"; /* WLAN_IRQ */
618 ste,config = <&gpio_in_pu>;
619 };
620 };
621 };
622 };
623
624 mcde@a0350000 {
625 pinctrl-names = "default", "sleep";
626 pinctrl-0 = <&lcd_default_mode>;
627 pinctrl-1 = <&lcd_sleep_mode>;
628 };
629 };
630};