1// SPDX-License-Identifier: GPL-2.0
 2// Copyright (c) 2018, The Linux Foundation. All rights reserved.
 3
 4#include <dt-bindings/gpio/gpio.h>
 5#include "qcom-ipq4019-ap.dk07.1.dtsi"
 6
 7/ {
 8	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
 9	compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
10
11	soc {
12		pci@40000000 {
13			status = "okay";
14			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
15		};
16
17		spi@78b6000 {
18			status = "okay";
19		};
20
21		pinctrl@1000000 {
22			serial_1_pins: serial1-pinmux {
23				pins = "gpio8", "gpio9",
24					"gpio10", "gpio11";
25				function = "blsp_uart1";
26				bias-disable;
27			};
28
29			spi_0_pins: spi-0-pinmux {
30				pinmux {
31					function = "blsp_spi0";
32					pins = "gpio13", "gpio14", "gpio15";
33					bias-disable;
34				};
35				pinmux_cs {
36					function = "gpio";
37					pins = "gpio12";
38					bias-disable;
39					output-high;
40				};
41			};
42		};
43
44		serial@78b0000 {
45			pinctrl-0 = <&serial_1_pins>;
46			pinctrl-names = "default";
47			status = "okay";
48		};
49
50		spi@78b5000 {
51			pinctrl-0 = <&spi_0_pins>;
52			pinctrl-names = "default";
53			status = "okay";
54			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
55
56			flash@0 {
57				#address-cells = <1>;
58				#size-cells = <1>;
59				reg = <0>;
60				compatible = "micron,n25q128a11", "jedec,spi-nor";
61				spi-max-frequency = <24000000>;
62			};
63		};
64	};
65};

 1// SPDX-License-Identifier: GPL-2.0
 2// Copyright (c) 2018, The Linux Foundation. All rights reserved.
 3
 
 4#include "qcom-ipq4019-ap.dk07.1.dtsi"
 5
 6/ {
 7	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
 8	compatible = "qcom,ipq4019-ap-dk07.1-c1";
 9
10	soc {
11		pci@40000000 {
12			status = "ok";
13			perst-gpio = <&tlmm 38 0x1>;
14		};
15
16		spi@78b6000 {
17			status = "ok";
18		};
19
20		pinctrl@1000000 {
21			serial_1_pins: serial1-pinmux {
22				pins = "gpio8", "gpio9",
23					"gpio10", "gpio11";
24				function = "blsp_uart1";
25				bias-disable;
26			};
27
28			spi_0_pins: spi-0-pinmux {
29				pinmux {
30					function = "blsp_spi0";
31					pins = "gpio13", "gpio14", "gpio15";
32					bias-disable;
33				};
34				pinmux_cs {
35					function = "gpio";
36					pins = "gpio12";
37					bias-disable;
38					output-high;
39				};
40			};
41		};
42
43		serial@78b0000 {
44			pinctrl-0 = <&serial_1_pins>;
45			pinctrl-names = "default";
46			status = "ok";
47		};
48
49		spi@78b5000 {
50			pinctrl-0 = <&spi_0_pins>;
51			pinctrl-names = "default";
52			status = "ok";
53			cs-gpios = <&tlmm 12 0>;
54
55			m25p80@0 {
56				#address-cells = <1>;
57				#size-cells = <1>;
58				reg = <0>;
59				compatible = "n25q128a11";
60				spi-max-frequency = <24000000>;
61			};
62		};
63	};
64};