Linux Audio

Check our new training course

Loading...
v6.2
  1# SPDX-License-Identifier: GPL-2.0-only
  2menu "Audio support for Texas Instruments SoCs"
  3depends on DMA_OMAP || TI_EDMA || TI_K3_UDMA || COMPILE_TEST
  4
  5config SND_SOC_TI_EDMA_PCM
  6	tristate
  7	select SND_SOC_GENERIC_DMAENGINE_PCM
  8
  9config SND_SOC_TI_SDMA_PCM
 10	tristate
 11	select SND_SOC_GENERIC_DMAENGINE_PCM
 12
 13config SND_SOC_TI_UDMA_PCM
 14	tristate
 15	select SND_SOC_GENERIC_DMAENGINE_PCM
 16
 17comment "Texas Instruments DAI support for:"
 18config SND_SOC_DAVINCI_ASP
 19	tristate "daVinci Audio Serial Port (ASP) or McBSP support"
 20	depends on ARCH_DAVINCI || COMPILE_TEST
 21	select SND_SOC_TI_EDMA_PCM
 22	help
 23	  Say Y or M here if you want audio support via daVinci ASP or McBSP.
 24	  The driver only implements the ASP support which is a subset of
 25	  daVinci McBSP (w/o the multichannel support).
 26
 27config SND_SOC_DAVINCI_MCASP
 28	tristate "Multichannel Audio Serial Port (McASP) support"
 29	depends on COMMON_CLK
 30	select SND_SOC_TI_EDMA_PCM
 31	select SND_SOC_TI_SDMA_PCM
 32	select SND_SOC_TI_UDMA_PCM
 33	help
 34	  Say Y or M here if you want to have support for McASP IP found in
 35	  various Texas Instruments SoCs like:
 36	  - daVinci devices
 37	  - Sitara line of SoCs (AM335x, AM438x, etc)
 38	  - OMAP4
 39	  - DRA7x devices
 40	  - Keystone devices
 41	  - K3 devices (am654, j721e)
 42
 43config SND_SOC_DAVINCI_VCIF
 44	tristate "daVinci Voice Interface (VCIF) support"
 45	depends on ARCH_DAVINCI || COMPILE_TEST
 46	select SND_SOC_TI_EDMA_PCM
 47	help
 48	  Say Y or M here if you want audio support via daVinci VCIF.
 49
 50config SND_SOC_OMAP_DMIC
 51	tristate "Digital Microphone Module (DMIC) support"
 52	depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST && COMMON_CLK
 53	select SND_SOC_TI_SDMA_PCM
 54	help
 55	  Say Y or M here if you want to have support for DMIC IP found in
 56	  OMAP4 and OMAP5.
 57
 58config SND_SOC_OMAP_MCBSP
 59	tristate "Multichannel Buffered Serial Port (McBSP) support"
 60	depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST && COMMON_CLK
 61	select SND_SOC_TI_SDMA_PCM
 62	help
 63	  Say Y or M here if you want to have support for McBSP IP found in
 64	  Texas Instruments OMAP1/2/3/4/5 SoCs.
 65
 66config SND_SOC_OMAP_MCPDM
 67	tristate "Multichannel PDM Controller (McPDM) support"
 68	depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
 69	select SND_SOC_TI_SDMA_PCM
 70	help
 71	  Say Y or M here if you want to have support for McPDM IP found in
 72	  OMAP4 and OMAP5.
 73
 74comment "Audio support for boards with Texas Instruments SoCs"
 75config SND_SOC_NOKIA_N810
 76	tristate "SoC Audio support for Nokia N810"
 77	depends on MACH_NOKIA_N810 && I2C
 78	select SND_SOC_OMAP_MCBSP
 79	select SND_SOC_TLV320AIC3X
 80	help
 81	  Say Y or M if you want to add support for SoC audio on Nokia N810.
 82
 83config SND_SOC_NOKIA_RX51
 84	tristate "SoC Audio support for Nokia RX-51"
 85	depends on ARCH_OMAP3 && I2C && GPIOLIB
 86	select SND_SOC_OMAP_MCBSP
 87	select SND_SOC_TLV320AIC3X
 88	select SND_SOC_TPA6130A2
 89	help
 90	  Say Y or M if you want to add support for SoC audio on Nokia RX-51
 91	  hardware. This is also known as Nokia N900 product.
 92
 93config SND_SOC_OMAP3_PANDORA
 94	tristate "SoC Audio support for OMAP3 Pandora"
 95	depends on ARCH_OMAP3
 96	depends on TWL4030_CORE
 97	select SND_SOC_OMAP_MCBSP
 98	select SND_SOC_TWL4030
 99	help
100	  Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora.
101
102config SND_SOC_OMAP3_TWL4030
103	tristate "SoC Audio support for OMAP3 based boards with twl4030 codec"
104	depends on ARCH_OMAP3 || COMPILE_TEST && COMMON_CLK
105	depends on TWL4030_CORE
106	select SND_SOC_OMAP_MCBSP
107	select SND_SOC_TWL4030
108	help
109	  Say Y or M if you want to add support for SoC audio on OMAP3 based
110	  boards using twl4030 as codec. This driver currently supports:
111	  - Beagleboard or Devkit8000
112	  - Gumstix Overo or CompuLab CM-T35/CM-T3730
113	  - IGEP v2
114	  - OMAP3EVM
115	  - SDP3430
116	  - Zoom2
117
118config SND_SOC_OMAP_ABE_TWL6040
119	tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
120	depends on TWL6040_CORE && COMMON_CLK
121	depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
122	select SND_SOC_OMAP_DMIC
123	select SND_SOC_OMAP_MCPDM
124	select SND_SOC_TWL6040
125	help
126	  Say Y or M if you want to add support for SoC audio on OMAP boards
127	  using ABE and twl6040 codec. This driver currently supports:
128	  - SDP4430/Blaze boards
129	  - PandaBoard (4430)
130	  - PandaBoardES (4460)
131	  - OMAP5 uEVM
132
133config SND_SOC_OMAP_AMS_DELTA
134	tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
135	depends on MACH_AMS_DELTA && TTY
136	select SND_SOC_OMAP_MCBSP
137	select SND_SOC_CX20442
138	help
139	  Say Y  or M if you want to add support  for SoC audio device
140	  connected to a handset and a speakerphone found on Amstrad E3 (Delta)
141	  videophone.
142
143	  Note that in order to get those devices fully supported,  you have to
144	  build  the kernel  with  standard  serial port  driver  included  and
145	  configured for at least 4 ports.  Then, from userspace, you must load
146	  a line discipline #19 on the modem (ttyS3) serial line.  The simplest
147	  way to achieve this is to install util-linux-ng  and use the included
148	  ldattach  utility.  This  can be  started  automatically  from  udev,
149	  a simple rule like this one should do the trick (it does for me):
150		ACTION=="add", KERNEL=="controlC0", \
151				RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
152
153config SND_SOC_OMAP_HDMI
154	tristate "OMAP4/5 HDMI audio support"
155	depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST
156	select SND_SOC_TI_SDMA_PCM
157	help
158	  For HDMI audio to work OMAPDSS HDMI support should be
159	  enabled.
160	  The hdmi audio driver implements cpu-dai component using the
161	  callbacks provided by OMAPDSS and registers the component
162	  under DSS HDMI device. Omap-pcm is registered for platform
163	  component also under DSS HDMI device. Dummy codec is used as
164	  as codec component. The hdmi audio driver implements also
165	  the card and registers it under its own platform device.
166	  The device for the driver is registered by OMAPDSS hdmi
167	  driver.
168
169config SND_SOC_OMAP_OSK5912
170	tristate "SoC Audio support for omap osk5912"
171	depends on MACH_OMAP_OSK && I2C
172	select SND_SOC_OMAP_MCBSP
173	select SND_SOC_TLV320AIC23_I2C
174	help
175	  Say Y or M if you want to add support for SoC audio on osk5912.
176
177config SND_SOC_DAVINCI_EVM
178	tristate "SoC Audio support for DaVinci EVMs"
179	depends on ARCH_DAVINCI && I2C
180	select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM
181	select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC
182	select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC
183	select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446
184	select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM
185	select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM
186	select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM
187	select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM
188	select SND_SOC_TLV320AIC3X
189	help
190	  Say Y if you want to add support for SoC audio on the following TI
191	  DaVinci EVM platforms:
192	  - DM355
193	  - DM365
194	  - DM6446
195	  - DM6447
196	  - DM830
197	  - DM850
198
199choice
200	prompt "DM365 codec select"
201	depends on SND_SOC_DAVINCI_EVM
202	depends on MACH_DAVINCI_DM365_EVM
203
204config SND_SOC_DM365_AIC3X_CODEC
205	bool "Audio Codec - AIC3101"
206	help
207	  Say Y if you want to add support for AIC3101 audio codec
208
209config SND_SOC_DM365_VOICE_CODEC
210	bool "Voice Codec - CQ93VC"
211	help
212	  Say Y if you want to add support for SoC On-chip voice codec
213endchoice
214
215config SND_SOC_DM365_SELECT_VOICE_CODECS
216	def_tristate y
217	depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC
218	select MFD_DAVINCI_VOICECODEC
219	select SND_SOC_CQ0093VC
220	help
221	  The is an internal symbol needed to ensure that the codec
222	  and MFD driver can be built as loadable modules if necessary.
223
224config SND_SOC_J721E_EVM
225	tristate "SoC Audio support for j721e EVM"
226	depends on ARCH_K3 || COMPILE_TEST && COMMON_CLK
227	depends on I2C
228	select SND_SOC_PCM3168A_I2C
229	select SND_SOC_DAVINCI_MCASP
230	help
231	  Say Y if you want to add support for SoC audio on j721e Common
232	  Processor Board and Infotainment expansion board.
233endmenu
234
v5.14.15
  1# SPDX-License-Identifier: GPL-2.0-only
  2menu "Audio support for Texas Instruments SoCs"
  3depends on DMA_OMAP || TI_EDMA || TI_K3_UDMA || COMPILE_TEST
  4
  5config SND_SOC_TI_EDMA_PCM
  6	tristate
  7	select SND_SOC_GENERIC_DMAENGINE_PCM
  8
  9config SND_SOC_TI_SDMA_PCM
 10	tristate
 11	select SND_SOC_GENERIC_DMAENGINE_PCM
 12
 13config SND_SOC_TI_UDMA_PCM
 14	tristate
 15	select SND_SOC_GENERIC_DMAENGINE_PCM
 16
 17comment "Texas Instruments DAI support for:"
 18config SND_SOC_DAVINCI_ASP
 19	tristate "daVinci Audio Serial Port (ASP) or McBSP support"
 20	depends on ARCH_DAVINCI || COMPILE_TEST
 21	select SND_SOC_TI_EDMA_PCM
 22	help
 23	  Say Y or M here if you want audio support via daVinci ASP or McBSP.
 24	  The driver only implements the ASP support which is a subset of
 25	  daVinci McBSP (w/o the multichannel support).
 26
 27config SND_SOC_DAVINCI_MCASP
 28	tristate "Multichannel Audio Serial Port (McASP) support"
 29	depends on COMMON_CLK
 30	select SND_SOC_TI_EDMA_PCM
 31	select SND_SOC_TI_SDMA_PCM
 32	select SND_SOC_TI_UDMA_PCM
 33	help
 34	  Say Y or M here if you want to have support for McASP IP found in
 35	  various Texas Instruments SoCs like:
 36	  - daVinci devices
 37	  - Sitara line of SoCs (AM335x, AM438x, etc)
 
 38	  - DRA7x devices
 39	  - Keystone devices
 40	  - K3 devices (am654, j721e)
 41
 42config SND_SOC_DAVINCI_VCIF
 43	tristate "daVinci Voice Interface (VCIF) support"
 44	depends on ARCH_DAVINCI || COMPILE_TEST
 45	select SND_SOC_TI_EDMA_PCM
 46	help
 47	  Say Y or M here if you want audio support via daVinci VCIF.
 48
 49config SND_SOC_OMAP_DMIC
 50	tristate "Digital Microphone Module (DMIC) support"
 51	depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST && COMMON_CLK
 52	select SND_SOC_TI_SDMA_PCM
 53	help
 54	  Say Y or M here if you want to have support for DMIC IP found in
 55	  OMAP4 and OMAP5.
 56
 57config SND_SOC_OMAP_MCBSP
 58	tristate "Multichannel Buffered Serial Port (McBSP) support"
 59	depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST && COMMON_CLK
 60	select SND_SOC_TI_SDMA_PCM
 61	help
 62	  Say Y or M here if you want to have support for McBSP IP found in
 63	  Texas Instruments OMAP1/2/3/4/5 SoCs.
 64
 65config SND_SOC_OMAP_MCPDM
 66	tristate "Multichannel PDM Controller (McPDM) support"
 67	depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
 68	select SND_SOC_TI_SDMA_PCM
 69	help
 70	  Say Y or M here if you want to have support for McPDM IP found in
 71	  OMAP4 and OMAP5.
 72
 73comment "Audio support for boards with Texas Instruments SoCs"
 74config SND_SOC_NOKIA_N810
 75	tristate "SoC Audio support for Nokia N810"
 76	depends on MACH_NOKIA_N810 && I2C
 77	select SND_SOC_OMAP_MCBSP
 78	select SND_SOC_TLV320AIC3X
 79	help
 80	  Say Y or M if you want to add support for SoC audio on Nokia N810.
 81
 82config SND_SOC_NOKIA_RX51
 83	tristate "SoC Audio support for Nokia RX-51"
 84	depends on ARCH_OMAP3 && I2C && GPIOLIB
 85	select SND_SOC_OMAP_MCBSP
 86	select SND_SOC_TLV320AIC3X
 87	select SND_SOC_TPA6130A2
 88	help
 89	  Say Y or M if you want to add support for SoC audio on Nokia RX-51
 90	  hardware. This is also known as Nokia N900 product.
 91
 92config SND_SOC_OMAP3_PANDORA
 93	tristate "SoC Audio support for OMAP3 Pandora"
 94	depends on ARCH_OMAP3
 95	depends on TWL4030_CORE
 96	select SND_SOC_OMAP_MCBSP
 97	select SND_SOC_TWL4030
 98	help
 99	  Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora.
100
101config SND_SOC_OMAP3_TWL4030
102	tristate "SoC Audio support for OMAP3 based boards with twl4030 codec"
103	depends on ARCH_OMAP3 || COMPILE_TEST && COMMON_CLK
104	depends on TWL4030_CORE
105	select SND_SOC_OMAP_MCBSP
106	select SND_SOC_TWL4030
107	help
108	  Say Y or M if you want to add support for SoC audio on OMAP3 based
109	  boards using twl4030 as codec. This driver currently supports:
110	  - Beagleboard or Devkit8000
111	  - Gumstix Overo or CompuLab CM-T35/CM-T3730
112	  - IGEP v2
113	  - OMAP3EVM
114	  - SDP3430
115	  - Zoom2
116
117config SND_SOC_OMAP_ABE_TWL6040
118	tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
119	depends on TWL6040_CORE && COMMON_CLK
120	depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
121	select SND_SOC_OMAP_DMIC
122	select SND_SOC_OMAP_MCPDM
123	select SND_SOC_TWL6040
124	help
125	  Say Y or M if you want to add support for SoC audio on OMAP boards
126	  using ABE and twl6040 codec. This driver currently supports:
127	  - SDP4430/Blaze boards
128	  - PandaBoard (4430)
129	  - PandaBoardES (4460)
130	  - OMAP5 uEVM
131
132config SND_SOC_OMAP_AMS_DELTA
133	tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
134	depends on MACH_AMS_DELTA && TTY
135	select SND_SOC_OMAP_MCBSP
136	select SND_SOC_CX20442
137	help
138	  Say Y  or M if you want to add support  for SoC audio device
139	  connected to a handset and a speakerphone found on Amstrad E3 (Delta)
140	  videophone.
141
142	  Note that in order to get those devices fully supported,  you have to
143	  build  the kernel  with  standard  serial port  driver  included  and
144	  configured for at least 4 ports.  Then, from userspace, you must load
145	  a line discipline #19 on the modem (ttyS3) serial line.  The simplest
146	  way to achieve this is to install util-linux-ng  and use the included
147	  ldattach  utility.  This  can be  started  automatically  from  udev,
148	  a simple rule like this one should do the trick (it does for me):
149		ACTION=="add", KERNEL=="controlC0", \
150				RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
151
152config SND_SOC_OMAP_HDMI
153	tristate "OMAP4/5 HDMI audio support"
154	depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST
155	select SND_SOC_TI_SDMA_PCM
156	help
157	  For HDMI audio to work OMAPDSS HDMI support should be
158	  enabled.
159	  The hdmi audio driver implements cpu-dai component using the
160	  callbacks provided by OMAPDSS and registers the component
161	  under DSS HDMI device. Omap-pcm is registered for platform
162	  component also under DSS HDMI device. Dummy codec is used as
163	  as codec component. The hdmi audio driver implements also
164	  the card and registers it under its own platform device.
165	  The device for the driver is registered by OMAPDSS hdmi
166	  driver.
167
168config SND_SOC_OMAP_OSK5912
169	tristate "SoC Audio support for omap osk5912"
170	depends on MACH_OMAP_OSK && I2C
171	select SND_SOC_OMAP_MCBSP
172	select SND_SOC_TLV320AIC23_I2C
173	help
174	  Say Y or M if you want to add support for SoC audio on osk5912.
175
176config SND_SOC_DAVINCI_EVM
177	tristate "SoC Audio support for DaVinci EVMs"
178	depends on ARCH_DAVINCI && I2C
179	select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM
180	select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC
181	select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC
182	select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446
183	select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM
184	select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM
185	select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM
186	select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM
187	select SND_SOC_TLV320AIC3X
188	help
189	  Say Y if you want to add support for SoC audio on the following TI
190	  DaVinci EVM platforms:
191	  - DM355
192	  - DM365
193	  - DM6446
194	  - DM6447
195	  - DM830
196	  - DM850
197
198choice
199	prompt "DM365 codec select"
200	depends on SND_SOC_DAVINCI_EVM
201	depends on MACH_DAVINCI_DM365_EVM
202
203config SND_SOC_DM365_AIC3X_CODEC
204	bool "Audio Codec - AIC3101"
205	help
206	  Say Y if you want to add support for AIC3101 audio codec
207
208config SND_SOC_DM365_VOICE_CODEC
209	bool "Voice Codec - CQ93VC"
210	help
211	  Say Y if you want to add support for SoC On-chip voice codec
212endchoice
213
214config SND_SOC_DM365_VOICE_CODEC_MODULE
215	def_tristate y
216	depends on SND_SOC_DM365_VOICE_CODEC && SND_SOC
217	select MFD_DAVINCI_VOICECODEC
218	select SND_SOC_CQ0093VC
219	help
220	  The is an internal symbol needed to ensure that the codec
221	  and MFD driver can be built as loadable modules if necessary.
222
223config SND_SOC_J721E_EVM
224	tristate "SoC Audio support for j721e EVM"
225	depends on ARCH_K3 || COMPILE_TEST && COMMON_CLK
226	depends on I2C
227	select SND_SOC_PCM3168A_I2C
228	select SND_SOC_DAVINCI_MCASP
229	help
230	  Say Y if you want to add support for SoC audio on j721e Common
231	  Processor Board and Infotainment expansion board.
232endmenu
233