Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
4 *
5 * Bus Glue for the EHCI controllers in OMAP3/4
6 * Tested on several OMAP3 boards, and OMAP4 Pandaboard
7 *
8 * Copyright (C) 2007-2013 Texas Instruments, Inc.
9 * Author: Vikram Pandita <vikram.pandita@ti.com>
10 * Author: Anand Gadiyar <gadiyar@ti.com>
11 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
12 * Author: Roger Quadros <rogerq@ti.com>
13 *
14 * Copyright (C) 2009 Nokia Corporation
15 * Contact: Felipe Balbi <felipe.balbi@nokia.com>
16 *
17 * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
18 */
19
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/io.h>
23#include <linux/platform_device.h>
24#include <linux/slab.h>
25#include <linux/usb/ulpi.h>
26#include <linux/pm_runtime.h>
27#include <linux/clk.h>
28#include <linux/usb.h>
29#include <linux/usb/hcd.h>
30#include <linux/of.h>
31#include <linux/dma-mapping.h>
32
33#include "ehci.h"
34
35#include <linux/platform_data/usb-omap.h>
36
37/* EHCI Register Set */
38#define EHCI_INSNREG04 (0xA0)
39#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
40#define EHCI_INSNREG05_ULPI (0xA4)
41#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
42#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
43#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
44#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
45#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
46#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
47
48#define DRIVER_DESC "OMAP-EHCI Host Controller driver"
49
50static const char hcd_name[] = "ehci-omap";
51
52/*-------------------------------------------------------------------------*/
53
54struct omap_hcd {
55 struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
56 int nports;
57};
58
59static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
60{
61 __raw_writel(val, base + reg);
62}
63
64/* configure so an HC device and id are always provided */
65/* always called with process context; sleeping is OK */
66
67static struct hc_driver __read_mostly ehci_omap_hc_driver;
68
69static const struct ehci_driver_overrides ehci_omap_overrides __initconst = {
70 .extra_priv_size = sizeof(struct omap_hcd),
71};
72
73/**
74 * ehci_hcd_omap_probe - initialize TI-based HCDs
75 * @pdev: Pointer to this platform device's information
76 *
77 * Allocates basic resources for this USB host controller, and
78 * then invokes the start() method for the HCD associated with it
79 * through the hotplug entry's driver_data.
80 */
81static int ehci_hcd_omap_probe(struct platform_device *pdev)
82{
83 struct device *dev = &pdev->dev;
84 struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
85 struct resource *res;
86 struct usb_hcd *hcd;
87 void __iomem *regs;
88 int ret;
89 int irq;
90 int i;
91 struct omap_hcd *omap;
92
93 if (usb_disabled())
94 return -ENODEV;
95
96 if (!dev->parent) {
97 dev_err(dev, "Missing parent device\n");
98 return -ENODEV;
99 }
100
101 /* For DT boot, get platform data from parent. i.e. usbhshost */
102 if (dev->of_node) {
103 pdata = dev_get_platdata(dev->parent);
104 dev->platform_data = pdata;
105 }
106
107 if (!pdata) {
108 dev_err(dev, "Missing platform data\n");
109 return -ENODEV;
110 }
111
112 irq = platform_get_irq(pdev, 0);
113 if (irq < 0)
114 return irq;
115
116 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
117 regs = devm_ioremap_resource(dev, res);
118 if (IS_ERR(regs))
119 return PTR_ERR(regs);
120
121 /*
122 * Right now device-tree probed devices don't get dma_mask set.
123 * Since shared usb code relies on it, set it here for now.
124 * Once we have dma capability bindings this can go away.
125 */
126 ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
127 if (ret)
128 return ret;
129
130 ret = -ENODEV;
131 hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
132 dev_name(dev));
133 if (!hcd) {
134 dev_err(dev, "Failed to create HCD\n");
135 return -ENOMEM;
136 }
137
138 hcd->rsrc_start = res->start;
139 hcd->rsrc_len = resource_size(res);
140 hcd->regs = regs;
141 hcd_to_ehci(hcd)->caps = regs;
142
143 omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
144 omap->nports = pdata->nports;
145
146 platform_set_drvdata(pdev, hcd);
147
148 /* get the PHY devices if needed */
149 for (i = 0 ; i < omap->nports ; i++) {
150 struct usb_phy *phy;
151
152 /* get the PHY device */
153 phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
154 if (IS_ERR(phy)) {
155 ret = PTR_ERR(phy);
156 if (ret == -ENODEV) { /* no PHY */
157 phy = NULL;
158 continue;
159 }
160
161 if (ret != -EPROBE_DEFER)
162 dev_err(dev, "Can't get PHY for port %d: %d\n",
163 i, ret);
164 goto err_phy;
165 }
166
167 omap->phy[i] = phy;
168
169 if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
170 usb_phy_init(omap->phy[i]);
171 /* bring PHY out of suspend */
172 usb_phy_set_suspend(omap->phy[i], 0);
173 }
174 }
175
176 pm_runtime_enable(dev);
177 pm_runtime_get_sync(dev);
178
179 /*
180 * An undocumented "feature" in the OMAP3 EHCI controller,
181 * causes suspended ports to be taken out of suspend when
182 * the USBCMD.Run/Stop bit is cleared (for example when
183 * we do ehci_bus_suspend).
184 * This breaks suspend-resume if the root-hub is allowed
185 * to suspend. Writing 1 to this undocumented register bit
186 * disables this feature and restores normal behavior.
187 */
188 ehci_write(regs, EHCI_INSNREG04,
189 EHCI_INSNREG04_DISABLE_UNSUSPEND);
190
191 ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
192 if (ret) {
193 dev_err(dev, "failed to add hcd with err %d\n", ret);
194 goto err_pm_runtime;
195 }
196 device_wakeup_enable(hcd->self.controller);
197
198 /*
199 * Bring PHYs out of reset for non PHY modes.
200 * Even though HSIC mode is a PHY-less mode, the reset
201 * line exists between the chips and can be modelled
202 * as a PHY device for reset control.
203 */
204 for (i = 0; i < omap->nports; i++) {
205 if (!omap->phy[i] ||
206 pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
207 continue;
208
209 usb_phy_init(omap->phy[i]);
210 /* bring PHY out of suspend */
211 usb_phy_set_suspend(omap->phy[i], 0);
212 }
213
214 return 0;
215
216err_pm_runtime:
217 pm_runtime_put_sync(dev);
218 pm_runtime_disable(dev);
219
220err_phy:
221 for (i = 0; i < omap->nports; i++) {
222 if (omap->phy[i])
223 usb_phy_shutdown(omap->phy[i]);
224 }
225
226 usb_put_hcd(hcd);
227
228 return ret;
229}
230
231
232/**
233 * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
234 * @pdev: USB Host Controller being removed
235 *
236 * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
237 * the HCD's stop() method. It is always called from a thread
238 * context, normally "rmmod", "apmd", or something similar.
239 */
240static int ehci_hcd_omap_remove(struct platform_device *pdev)
241{
242 struct device *dev = &pdev->dev;
243 struct usb_hcd *hcd = dev_get_drvdata(dev);
244 struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
245 int i;
246
247 usb_remove_hcd(hcd);
248
249 for (i = 0; i < omap->nports; i++) {
250 if (omap->phy[i])
251 usb_phy_shutdown(omap->phy[i]);
252 }
253
254 usb_put_hcd(hcd);
255 pm_runtime_put_sync(dev);
256 pm_runtime_disable(dev);
257
258 return 0;
259}
260
261static const struct of_device_id omap_ehci_dt_ids[] = {
262 { .compatible = "ti,ehci-omap" },
263 { }
264};
265
266MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
267
268static struct platform_driver ehci_hcd_omap_driver = {
269 .probe = ehci_hcd_omap_probe,
270 .remove = ehci_hcd_omap_remove,
271 .shutdown = usb_hcd_platform_shutdown,
272 /*.suspend = ehci_hcd_omap_suspend, */
273 /*.resume = ehci_hcd_omap_resume, */
274 .driver = {
275 .name = hcd_name,
276 .of_match_table = omap_ehci_dt_ids,
277 }
278};
279
280/*-------------------------------------------------------------------------*/
281
282static int __init ehci_omap_init(void)
283{
284 if (usb_disabled())
285 return -ENODEV;
286
287 ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
288 return platform_driver_register(&ehci_hcd_omap_driver);
289}
290module_init(ehci_omap_init);
291
292static void __exit ehci_omap_cleanup(void)
293{
294 platform_driver_unregister(&ehci_hcd_omap_driver);
295}
296module_exit(ehci_omap_cleanup);
297
298MODULE_ALIAS("platform:ehci-omap");
299MODULE_AUTHOR("Texas Instruments, Inc.");
300MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
301MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
302
303MODULE_DESCRIPTION(DRIVER_DESC);
304MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
4 *
5 * Bus Glue for the EHCI controllers in OMAP3/4
6 * Tested on several OMAP3 boards, and OMAP4 Pandaboard
7 *
8 * Copyright (C) 2007-2013 Texas Instruments, Inc.
9 * Author: Vikram Pandita <vikram.pandita@ti.com>
10 * Author: Anand Gadiyar <gadiyar@ti.com>
11 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
12 * Author: Roger Quadros <rogerq@ti.com>
13 *
14 * Copyright (C) 2009 Nokia Corporation
15 * Contact: Felipe Balbi <felipe.balbi@nokia.com>
16 *
17 * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
18 */
19
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/io.h>
23#include <linux/platform_device.h>
24#include <linux/slab.h>
25#include <linux/usb/ulpi.h>
26#include <linux/pm_runtime.h>
27#include <linux/clk.h>
28#include <linux/usb.h>
29#include <linux/usb/hcd.h>
30#include <linux/of.h>
31#include <linux/dma-mapping.h>
32
33#include "ehci.h"
34
35#include <linux/platform_data/usb-omap.h>
36
37/* EHCI Register Set */
38#define EHCI_INSNREG04 (0xA0)
39#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
40#define EHCI_INSNREG05_ULPI (0xA4)
41#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
42#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
43#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
44#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
45#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
46#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
47
48#define DRIVER_DESC "OMAP-EHCI Host Controller driver"
49
50static const char hcd_name[] = "ehci-omap";
51
52/*-------------------------------------------------------------------------*/
53
54struct omap_hcd {
55 struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
56 int nports;
57};
58
59static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
60{
61 __raw_writel(val, base + reg);
62}
63
64static inline u32 ehci_read(void __iomem *base, u32 reg)
65{
66 return __raw_readl(base + reg);
67}
68
69/* configure so an HC device and id are always provided */
70/* always called with process context; sleeping is OK */
71
72static struct hc_driver __read_mostly ehci_omap_hc_driver;
73
74static const struct ehci_driver_overrides ehci_omap_overrides __initconst = {
75 .extra_priv_size = sizeof(struct omap_hcd),
76};
77
78/**
79 * ehci_hcd_omap_probe - initialize TI-based HCDs
80 * @pdev: Pointer to this platform device's information
81 *
82 * Allocates basic resources for this USB host controller, and
83 * then invokes the start() method for the HCD associated with it
84 * through the hotplug entry's driver_data.
85 */
86static int ehci_hcd_omap_probe(struct platform_device *pdev)
87{
88 struct device *dev = &pdev->dev;
89 struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
90 struct resource *res;
91 struct usb_hcd *hcd;
92 void __iomem *regs;
93 int ret;
94 int irq;
95 int i;
96 struct omap_hcd *omap;
97
98 if (usb_disabled())
99 return -ENODEV;
100
101 if (!dev->parent) {
102 dev_err(dev, "Missing parent device\n");
103 return -ENODEV;
104 }
105
106 /* For DT boot, get platform data from parent. i.e. usbhshost */
107 if (dev->of_node) {
108 pdata = dev_get_platdata(dev->parent);
109 dev->platform_data = pdata;
110 }
111
112 if (!pdata) {
113 dev_err(dev, "Missing platform data\n");
114 return -ENODEV;
115 }
116
117 irq = platform_get_irq(pdev, 0);
118 if (irq < 0)
119 return irq;
120
121 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
122 regs = devm_ioremap_resource(dev, res);
123 if (IS_ERR(regs))
124 return PTR_ERR(regs);
125
126 /*
127 * Right now device-tree probed devices don't get dma_mask set.
128 * Since shared usb code relies on it, set it here for now.
129 * Once we have dma capability bindings this can go away.
130 */
131 ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
132 if (ret)
133 return ret;
134
135 ret = -ENODEV;
136 hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
137 dev_name(dev));
138 if (!hcd) {
139 dev_err(dev, "Failed to create HCD\n");
140 return -ENOMEM;
141 }
142
143 hcd->rsrc_start = res->start;
144 hcd->rsrc_len = resource_size(res);
145 hcd->regs = regs;
146 hcd_to_ehci(hcd)->caps = regs;
147
148 omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
149 omap->nports = pdata->nports;
150
151 platform_set_drvdata(pdev, hcd);
152
153 /* get the PHY devices if needed */
154 for (i = 0 ; i < omap->nports ; i++) {
155 struct usb_phy *phy;
156
157 /* get the PHY device */
158 phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
159 if (IS_ERR(phy)) {
160 ret = PTR_ERR(phy);
161 if (ret == -ENODEV) { /* no PHY */
162 phy = NULL;
163 continue;
164 }
165
166 if (ret != -EPROBE_DEFER)
167 dev_err(dev, "Can't get PHY for port %d: %d\n",
168 i, ret);
169 goto err_phy;
170 }
171
172 omap->phy[i] = phy;
173
174 if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
175 usb_phy_init(omap->phy[i]);
176 /* bring PHY out of suspend */
177 usb_phy_set_suspend(omap->phy[i], 0);
178 }
179 }
180
181 pm_runtime_enable(dev);
182 pm_runtime_get_sync(dev);
183
184 /*
185 * An undocumented "feature" in the OMAP3 EHCI controller,
186 * causes suspended ports to be taken out of suspend when
187 * the USBCMD.Run/Stop bit is cleared (for example when
188 * we do ehci_bus_suspend).
189 * This breaks suspend-resume if the root-hub is allowed
190 * to suspend. Writing 1 to this undocumented register bit
191 * disables this feature and restores normal behavior.
192 */
193 ehci_write(regs, EHCI_INSNREG04,
194 EHCI_INSNREG04_DISABLE_UNSUSPEND);
195
196 ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
197 if (ret) {
198 dev_err(dev, "failed to add hcd with err %d\n", ret);
199 goto err_pm_runtime;
200 }
201 device_wakeup_enable(hcd->self.controller);
202
203 /*
204 * Bring PHYs out of reset for non PHY modes.
205 * Even though HSIC mode is a PHY-less mode, the reset
206 * line exists between the chips and can be modelled
207 * as a PHY device for reset control.
208 */
209 for (i = 0; i < omap->nports; i++) {
210 if (!omap->phy[i] ||
211 pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
212 continue;
213
214 usb_phy_init(omap->phy[i]);
215 /* bring PHY out of suspend */
216 usb_phy_set_suspend(omap->phy[i], 0);
217 }
218
219 return 0;
220
221err_pm_runtime:
222 pm_runtime_put_sync(dev);
223 pm_runtime_disable(dev);
224
225err_phy:
226 for (i = 0; i < omap->nports; i++) {
227 if (omap->phy[i])
228 usb_phy_shutdown(omap->phy[i]);
229 }
230
231 usb_put_hcd(hcd);
232
233 return ret;
234}
235
236
237/**
238 * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
239 * @pdev: USB Host Controller being removed
240 *
241 * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
242 * the HCD's stop() method. It is always called from a thread
243 * context, normally "rmmod", "apmd", or something similar.
244 */
245static int ehci_hcd_omap_remove(struct platform_device *pdev)
246{
247 struct device *dev = &pdev->dev;
248 struct usb_hcd *hcd = dev_get_drvdata(dev);
249 struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
250 int i;
251
252 usb_remove_hcd(hcd);
253
254 for (i = 0; i < omap->nports; i++) {
255 if (omap->phy[i])
256 usb_phy_shutdown(omap->phy[i]);
257 }
258
259 usb_put_hcd(hcd);
260 pm_runtime_put_sync(dev);
261 pm_runtime_disable(dev);
262
263 return 0;
264}
265
266static const struct of_device_id omap_ehci_dt_ids[] = {
267 { .compatible = "ti,ehci-omap" },
268 { }
269};
270
271MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
272
273static struct platform_driver ehci_hcd_omap_driver = {
274 .probe = ehci_hcd_omap_probe,
275 .remove = ehci_hcd_omap_remove,
276 .shutdown = usb_hcd_platform_shutdown,
277 /*.suspend = ehci_hcd_omap_suspend, */
278 /*.resume = ehci_hcd_omap_resume, */
279 .driver = {
280 .name = hcd_name,
281 .of_match_table = omap_ehci_dt_ids,
282 }
283};
284
285/*-------------------------------------------------------------------------*/
286
287static int __init ehci_omap_init(void)
288{
289 if (usb_disabled())
290 return -ENODEV;
291
292 pr_info("%s: " DRIVER_DESC "\n", hcd_name);
293
294 ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
295 return platform_driver_register(&ehci_hcd_omap_driver);
296}
297module_init(ehci_omap_init);
298
299static void __exit ehci_omap_cleanup(void)
300{
301 platform_driver_unregister(&ehci_hcd_omap_driver);
302}
303module_exit(ehci_omap_cleanup);
304
305MODULE_ALIAS("platform:ehci-omap");
306MODULE_AUTHOR("Texas Instruments, Inc.");
307MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
308MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
309
310MODULE_DESCRIPTION(DRIVER_DESC);
311MODULE_LICENSE("GPL");