1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for Samsung platforms
  4#
  5config PHY_EXYNOS_DP_VIDEO
  6	tristate "Exynos SoC series Display Port PHY driver"
  7	depends on OF
  8	depends on ARCH_EXYNOS || COMPILE_TEST
  9	default ARCH_EXYNOS
 10	select GENERIC_PHY
 11	help
 12	  Support for Display Port PHY found on Samsung Exynos SoCs.
 13
 14config PHY_EXYNOS_MIPI_VIDEO
 15	tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver"
 16	depends on HAS_IOMEM
 17	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 18	select GENERIC_PHY
 19	default y if ARCH_S5PV210 || ARCH_EXYNOS
 20	help
 21	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
 22	  and Exynos SoCs.
 23
 24config PHY_EXYNOS_PCIE
 25	bool "Exynos PCIe PHY driver"
 26	depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
 27	select GENERIC_PHY
 28	help
 29	  Enable PCIe PHY support for Exynos SoC series.
 30	  This driver provides PHY interface for Exynos PCIe controller.
 31
 32config PHY_SAMSUNG_UFS
 33	tristate "Exynos SoC series UFS PHY driver"
 34	depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
 35	select GENERIC_PHY
 36	help
 37	  Enable this to support the Samsung Exynos SoC UFS PHY driver for
 38	  Samsung Exynos SoCs. This driver provides the interface for UFS host
 39	  controller to do PHY related programming.
 40
 41config PHY_SAMSUNG_USB2
 42	tristate "S5P/Exynos SoC series USB 2.0 PHY driver"
 43	depends on HAS_IOMEM
 44	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
 45	select GENERIC_PHY
 46	select MFD_SYSCON
 47	default ARCH_EXYNOS
 48	help
 49	  Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 50	  S5Pv210 and Exynos SoCs. This driver provides the interface for USB
 51	  2.0 PHY. Support for particular PHYs will be enabled based on the SoC
 52	  type in addition to this driver.
 53
 54config PHY_EXYNOS4210_USB2
 55	bool
 56	depends on PHY_SAMSUNG_USB2
 57	default CPU_EXYNOS4210
 58
 59config PHY_EXYNOS4X12_USB2
 60	bool
 61	depends on PHY_SAMSUNG_USB2
 62	default SOC_EXYNOS3250 || SOC_EXYNOS4412
 63
 64config PHY_EXYNOS5250_USB2
 65	bool
 66	depends on PHY_SAMSUNG_USB2
 67	default SOC_EXYNOS5250 || SOC_EXYNOS5420
 68
 69config PHY_S5PV210_USB2
 70	bool "Support for S5PV210"
 71	depends on PHY_SAMSUNG_USB2
 72	depends on ARCH_S5PV210 || COMPILE_TEST
 73	help
 74	  Enable USB PHY support for S5PV210. This option requires that Samsung
 75	  USB 2.0 PHY driver is enabled and means that support for this
 76	  particular SoC is compiled in the driver. In case of S5PV210 two phys
 77	  are available - device and host.
 78
 79config PHY_EXYNOS5_USBDRD
 80	tristate "Exynos5 SoC series USB DRD PHY driver"
 81	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
 82	depends on HAS_IOMEM
 83	depends on USB_DWC3_EXYNOS
 84	select GENERIC_PHY
 85	select MFD_SYSCON
 86	default y
 87	help
 88	  Enable USB DRD PHY support for Exynos 5 SoC series.
 89	  This driver provides PHY interface for USB 3.0 DRD controller
 90	  present on Exynos5 SoC series.
 91
 92config PHY_EXYNOS5250_SATA
 93	tristate "Exynos5250 Sata SerDes/PHY driver"
 94	depends on SOC_EXYNOS5250
 95	depends on HAS_IOMEM
 96	depends on OF
 97	select GENERIC_PHY
 98	select I2C
 99	select I2C_S3C2410
100	select MFD_SYSCON
101	help
102	  Enable this to support SATA SerDes/Phy found on Samsung's
103	  Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
104	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
105	  port to accept one SATA device.

  1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for Samsung platforms
  4#
  5config PHY_EXYNOS_DP_VIDEO
  6	tristate "Exynos SoC series Display Port PHY driver"
  7	depends on OF
  8	depends on ARCH_EXYNOS || COMPILE_TEST
  9	default ARCH_EXYNOS
 10	select GENERIC_PHY
 11	help
 12	  Support for Display Port PHY found on Samsung Exynos SoCs.
 13
 14config PHY_EXYNOS_MIPI_VIDEO
 15	tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver"
 16	depends on HAS_IOMEM
 17	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 18	select GENERIC_PHY
 19	default y if ARCH_S5PV210 || ARCH_EXYNOS
 20	help
 21	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
 22	  and Exynos SoCs.
 23
 24config PHY_EXYNOS_PCIE
 25	bool "Exynos PCIe PHY driver"
 26	depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
 27	select GENERIC_PHY
 28	help
 29	  Enable PCIe PHY support for Exynos SoC series.
 30	  This driver provides PHY interface for Exynos PCIe controller.
 31
 32config PHY_SAMSUNG_UFS
 33	tristate "SAMSUNG SoC series UFS PHY driver"
 34	depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
 35	select GENERIC_PHY
 36	help
 37	  Enable this to support the Samsung UFS PHY driver for
 38	  Samsung SoCs. This driver provides the interface for UFS
 39	  host controller to do PHY related programming.
 40
 41config PHY_SAMSUNG_USB2
 42	tristate "Samsung USB 2.0 PHY driver"
 43	depends on HAS_IOMEM
 44	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
 45	select GENERIC_PHY
 46	select MFD_SYSCON
 47	default ARCH_EXYNOS
 48	help
 49	  Enable this to support the Samsung USB 2.0 PHY driver for Samsung
 50	  SoCs. This driver provides the interface for USB 2.0 PHY. Support
 51	  for particular PHYs will be enabled based on the SoC type in addition
 52	  to this driver.
 53
 54config PHY_EXYNOS4210_USB2
 55	bool
 56	depends on PHY_SAMSUNG_USB2
 57	default CPU_EXYNOS4210
 58
 59config PHY_EXYNOS4X12_USB2
 60	bool
 61	depends on PHY_SAMSUNG_USB2
 62	default SOC_EXYNOS3250 || SOC_EXYNOS4412
 63
 64config PHY_EXYNOS5250_USB2
 65	bool
 66	depends on PHY_SAMSUNG_USB2
 67	default SOC_EXYNOS5250 || SOC_EXYNOS5420
 68
 69config PHY_S5PV210_USB2
 70	bool "Support for S5PV210"
 71	depends on PHY_SAMSUNG_USB2
 72	depends on ARCH_S5PV210 || COMPILE_TEST
 73	help
 74	  Enable USB PHY support for S5PV210. This option requires that Samsung
 75	  USB 2.0 PHY driver is enabled and means that support for this
 76	  particular SoC is compiled in the driver. In case of S5PV210 two phys
 77	  are available - device and host.
 78
 79config PHY_EXYNOS5_USBDRD
 80	tristate "Exynos5 SoC series USB DRD PHY driver"
 81	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
 82	depends on HAS_IOMEM
 83	depends on USB_DWC3_EXYNOS
 84	select GENERIC_PHY
 85	select MFD_SYSCON
 86	default y
 87	help
 88	  Enable USB DRD PHY support for Exynos 5 SoC series.
 89	  This driver provides PHY interface for USB 3.0 DRD controller
 90	  present on Exynos5 SoC series.
 91
 92config PHY_EXYNOS5250_SATA
 93	tristate "Exynos5250 Sata SerDes/PHY driver"
 94	depends on SOC_EXYNOS5250
 95	depends on HAS_IOMEM
 96	depends on OF
 97	select GENERIC_PHY
 98	select I2C
 99	select I2C_S3C2410
100	select MFD_SYSCON
101	help
102	  Enable this to support SATA SerDes/Phy found on Samsung's
103	  Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
104	  SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
105	  port to accept one SATA device.