Loading...
Note: File does not exist in v5.14.15.
1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-apq8064-v2.0.dtsi"
3#include <dt-bindings/gpio/gpio.h>
4#include <dt-bindings/input/input.h>
5#include <dt-bindings/mfd/qcom-rpm.h>
6#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
7
8/ {
9 model = "Sony Xperia Z";
10 compatible = "sony,xperia-yuga", "qcom,apq8064";
11 chassis-type = "handset";
12
13 aliases {
14 serial0 = &gsbi5_serial;
15 };
16
17 chosen {
18 stdout-path = "serial0:115200n8";
19 };
20
21 gpio-keys {
22 compatible = "gpio-keys";
23
24 pinctrl-names = "default";
25 pinctrl-0 = <&gpio_keys_pin_a>;
26
27 key-camera-focus {
28 label = "camera_focus";
29 gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
30 linux,input-type = <1>;
31 linux,code = <KEY_CAMERA_FOCUS>;
32 };
33
34 key-camera-snapshot {
35 label = "camera_snapshot";
36 gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
37 linux,input-type = <1>;
38 linux,code = <KEY_CAMERA>;
39 };
40
41 key-volume-down {
42 label = "volume_down";
43 gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
44 linux,input-type = <1>;
45 linux,code = <KEY_VOLUMEDOWN>;
46 };
47
48 key-volume-up {
49 label = "volume_up";
50 gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
51 linux,input-type = <1>;
52 linux,code = <KEY_VOLUMEUP>;
53 };
54 };
55};
56
57&gsbi5 {
58 qcom,mode = <GSBI_PROT_I2C_UART>;
59 status = "okay";
60};
61
62&gsbi5_serial {
63 pinctrl-names = "default";
64 pinctrl-0 = <&gsbi5_uart_pin_a>;
65 status = "okay";
66};
67
68&pm8921_gpio {
69 gpio_keys_pin_a: gpio-keys-active-state {
70 pins = "gpio3", "gpio4", "gpio29", "gpio35";
71 function = "normal";
72
73 bias-pull-up;
74 drive-push-pull;
75 input-enable;
76 power-source = <2>;
77 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
78 qcom,pull-up-strength = <0>;
79 };
80};
81
82&riva {
83 pinctrl-names = "default";
84 pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
85 status = "okay";
86};
87
88&rpm {
89 regulators {
90 vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
91 vin_lvs_1_3_6-supply = <&pm8921_s4>;
92 vin_lvs_4_5_7-supply = <&pm8921_s4>;
93 vin_ncp-supply = <&pm8921_l6>;
94 vin_lvs2-supply = <&pm8921_s4>;
95 vin_l24-supply = <&pm8921_s1>;
96 vin_l25-supply = <&pm8921_s1>;
97 vin_l27-supply = <&pm8921_s7>;
98 vin_l28-supply = <&pm8921_s7>;
99
100 /* Buck SMPS */
101 s1 {
102 regulator-always-on;
103 regulator-min-microvolt = <1225000>;
104 regulator-max-microvolt = <1225000>;
105 qcom,switch-mode-frequency = <3200000>;
106 bias-pull-down;
107 };
108
109 s2 {
110 regulator-min-microvolt = <1300000>;
111 regulator-max-microvolt = <1300000>;
112 qcom,switch-mode-frequency = <1600000>;
113 bias-pull-down;
114 };
115
116 s3 {
117 regulator-min-microvolt = <500000>;
118 regulator-max-microvolt = <1150000>;
119 qcom,switch-mode-frequency = <4800000>;
120 bias-pull-down;
121 };
122
123 s4 {
124 regulator-always-on;
125 regulator-min-microvolt = <1800000>;
126 regulator-max-microvolt = <1800000>;
127 qcom,switch-mode-frequency = <1600000>;
128 bias-pull-down;
129 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
130 };
131
132 s7 {
133 regulator-min-microvolt = <1300000>;
134 regulator-max-microvolt = <1300000>;
135 qcom,switch-mode-frequency = <3200000>;
136 };
137
138 s8 {
139 regulator-min-microvolt = <2200000>;
140 regulator-max-microvolt = <2200000>;
141 qcom,switch-mode-frequency = <1600000>;
142 };
143
144 /* PMOS LDO */
145 l1 {
146 regulator-always-on;
147 regulator-min-microvolt = <1100000>;
148 regulator-max-microvolt = <1100000>;
149 bias-pull-down;
150 };
151
152 l2 {
153 regulator-min-microvolt = <1200000>;
154 regulator-max-microvolt = <1200000>;
155 bias-pull-down;
156 };
157
158 l3 {
159 regulator-min-microvolt = <3075000>;
160 regulator-max-microvolt = <3075000>;
161 bias-pull-down;
162 };
163
164 l4 {
165 regulator-always-on;
166 regulator-min-microvolt = <1800000>;
167 regulator-max-microvolt = <1800000>;
168 bias-pull-down;
169 };
170
171 l5 {
172 regulator-min-microvolt = <2950000>;
173 regulator-max-microvolt = <2950000>;
174 bias-pull-down;
175 };
176
177 l6 {
178 regulator-min-microvolt = <2950000>;
179 regulator-max-microvolt = <2950000>;
180 bias-pull-down;
181 };
182
183 l7 {
184 regulator-min-microvolt = <1850000>;
185 regulator-max-microvolt = <2950000>;
186 bias-pull-down;
187 };
188
189 l8 {
190 regulator-min-microvolt = <2800000>;
191 regulator-max-microvolt = <2800000>;
192 bias-pull-down;
193 };
194
195 l9 {
196 regulator-min-microvolt = <3000000>;
197 regulator-max-microvolt = <3000000>;
198 bias-pull-down;
199 };
200
201 l10 {
202 regulator-min-microvolt = <2900000>;
203 regulator-max-microvolt = <2900000>;
204 bias-pull-down;
205 };
206
207 l11 {
208 regulator-min-microvolt = <3000000>;
209 regulator-max-microvolt = <3000000>;
210 bias-pull-down;
211 };
212
213 l12 {
214 regulator-min-microvolt = <1200000>;
215 regulator-max-microvolt = <1200000>;
216 bias-pull-down;
217 };
218
219 l14 {
220 regulator-min-microvolt = <1800000>;
221 regulator-max-microvolt = <1800000>;
222 bias-pull-down;
223 };
224
225 l15 {
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <2950000>;
228 bias-pull-down;
229 };
230
231 l16 {
232 regulator-min-microvolt = <2800000>;
233 regulator-max-microvolt = <2800000>;
234 bias-pull-down;
235 };
236
237 l17 {
238 regulator-min-microvolt = <2000000>;
239 regulator-max-microvolt = <2000000>;
240 bias-pull-down;
241 };
242
243 l18 {
244 regulator-min-microvolt = <1200000>;
245 regulator-max-microvolt = <1200000>;
246 bias-pull-down;
247 };
248
249 l21 {
250 regulator-min-microvolt = <1050000>;
251 regulator-max-microvolt = <1050000>;
252 bias-pull-down;
253 };
254
255 l22 {
256 regulator-min-microvolt = <2600000>;
257 regulator-max-microvolt = <2600000>;
258 bias-pull-down;
259 };
260
261 l23 {
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <1800000>;
264 bias-pull-down;
265 };
266
267 l24 {
268 regulator-min-microvolt = <750000>;
269 regulator-max-microvolt = <1150000>;
270 bias-pull-down;
271 };
272
273 l25 {
274 regulator-always-on;
275 regulator-min-microvolt = <1250000>;
276 regulator-max-microvolt = <1250000>;
277 bias-pull-down;
278 };
279
280 l27 {
281 regulator-min-microvolt = <1100000>;
282 regulator-max-microvolt = <1100000>;
283 };
284
285 l28 {
286 regulator-min-microvolt = <1050000>;
287 regulator-max-microvolt = <1050000>;
288 bias-pull-down;
289 };
290
291 l29 {
292 regulator-min-microvolt = <2000000>;
293 regulator-max-microvolt = <2000000>;
294 bias-pull-down;
295 };
296
297 /* Low Voltage Switch */
298 lvs1 {
299 bias-pull-down;
300 };
301
302 lvs2 {
303 bias-pull-down;
304 };
305
306 lvs3 {
307 bias-pull-down;
308 };
309
310 lvs4 {
311 bias-pull-down;
312 };
313
314 lvs5 {
315 bias-pull-down;
316 };
317
318 lvs6 {
319 bias-pull-down;
320 };
321
322 lvs7 {
323 bias-pull-down;
324 };
325
326 usb-switch {};
327
328 hdmi-switch {};
329
330 ncp {
331 regulator-min-microvolt = <1800000>;
332 regulator-max-microvolt = <1800000>;
333 qcom,switch-mode-frequency = <1600000>;
334 };
335 };
336};
337
338&sdcc1 {
339 vmmc-supply = <&pm8921_l5>;
340 vqmmc-supply = <&pm8921_s4>;
341 status = "okay";
342};
343
344&sdcc3 {
345 vmmc-supply = <&pm8921_l6>;
346 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
347
348 pinctrl-names = "default";
349 pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
350
351 status = "okay";
352};
353
354&tlmm_pinmux {
355 gsbi5_uart_pin_a: gsbi5-uart-pin-active {
356 rx {
357 pins = "gpio52";
358 function = "gsbi5";
359 drive-strength = <2>;
360 bias-pull-up;
361 };
362
363 tx {
364 pins = "gpio51";
365 function = "gsbi5";
366 drive-strength = <4>;
367 bias-disable;
368 };
369 };
370
371
372 sdcc3_cd_pin_a: sdcc3-cd-pin-active {
373 pins = "gpio26";
374 function = "gpio";
375
376 drive-strength = <2>;
377 bias-disable;
378 };
379};
380
381&usb_hs1_phy {
382 v3p3-supply = <&pm8921_l3>;
383 v1p8-supply = <&pm8921_l4>;
384};
385
386&usb1 {
387 dr_mode = "otg";
388 status = "okay";
389};