Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11 /* these are used by bootloader for disabling nodes */
12 aliases {
13 led0 = &led0;
14 led1 = &led1;
15 led2 = &led2;
16 nand = &gpmi;
17 ssi0 = &ssi1;
18 usb0 = &usbh1;
19 usb1 = &usbotg;
20 };
21
22 chosen {
23 bootargs = "console=ttymxc1,115200";
24 };
25
26 backlight {
27 compatible = "pwm-backlight";
28 pwms = <&pwm4 0 5000000>;
29 brightness-levels = <0 4 8 16 32 64 128 255>;
30 default-brightness-level = <7>;
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35
36 user-pb {
37 label = "user_pb";
38 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
39 linux,code = <BTN_0>;
40 };
41
42 user-pb1x {
43 label = "user_pb1x";
44 linux,code = <BTN_1>;
45 interrupt-parent = <&gsc>;
46 interrupts = <0>;
47 };
48
49 key-erased {
50 label = "key-erased";
51 linux,code = <BTN_2>;
52 interrupt-parent = <&gsc>;
53 interrupts = <1>;
54 };
55
56 eeprom-wp {
57 label = "eeprom_wp";
58 linux,code = <BTN_3>;
59 interrupt-parent = <&gsc>;
60 interrupts = <2>;
61 };
62
63 tamper {
64 label = "tamper";
65 linux,code = <BTN_4>;
66 interrupt-parent = <&gsc>;
67 interrupts = <5>;
68 };
69
70 switch-hold {
71 label = "switch_hold";
72 linux,code = <BTN_5>;
73 interrupt-parent = <&gsc>;
74 interrupts = <7>;
75 };
76 };
77
78 leds {
79 compatible = "gpio-leds";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_gpio_leds>;
82
83 led0: user1 {
84 label = "user1";
85 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
86 default-state = "on";
87 linux,default-trigger = "heartbeat";
88 };
89
90 led1: user2 {
91 label = "user2";
92 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
93 default-state = "off";
94 };
95
96 led2: user3 {
97 label = "user3";
98 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
99 default-state = "off";
100 };
101 };
102
103 memory@10000000 {
104 device_type = "memory";
105 reg = <0x10000000 0x40000000>;
106 };
107
108 pps {
109 compatible = "pps-gpio";
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_pps>;
112 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
113 status = "okay";
114 };
115
116 reg_1p0v: regulator-1p0v {
117 compatible = "regulator-fixed";
118 regulator-name = "1P0V";
119 regulator-min-microvolt = <1000000>;
120 regulator-max-microvolt = <1000000>;
121 regulator-always-on;
122 };
123
124 reg_3p3v: regulator-3p3v {
125 compatible = "regulator-fixed";
126 regulator-name = "3P3V";
127 regulator-min-microvolt = <3300000>;
128 regulator-max-microvolt = <3300000>;
129 regulator-always-on;
130 };
131
132 reg_can1_stby: regulator-can1-stby {
133 compatible = "regulator-fixed";
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_reg_can1>;
136 regulator-name = "can1_stby";
137 gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
138 regulator-min-microvolt = <3300000>;
139 regulator-max-microvolt = <3300000>;
140 };
141
142 reg_usb_h1_vbus: regulator-usb-h1-vbus {
143 compatible = "regulator-fixed";
144 regulator-name = "usb_h1_vbus";
145 regulator-min-microvolt = <5000000>;
146 regulator-max-microvolt = <5000000>;
147 regulator-always-on;
148 };
149
150 reg_usb_otg_vbus: regulator-usb-otg-vbus {
151 compatible = "regulator-fixed";
152 regulator-name = "usb_otg_vbus";
153 regulator-min-microvolt = <5000000>;
154 regulator-max-microvolt = <5000000>;
155 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
156 enable-active-high;
157 };
158
159 sound {
160 compatible = "fsl,imx6q-ventana-sgtl5000",
161 "fsl,imx-audio-sgtl5000";
162 model = "sgtl5000-audio";
163 ssi-controller = <&ssi1>;
164 audio-codec = <&codec>;
165 audio-routing =
166 "MIC_IN", "Mic Jack",
167 "Mic Jack", "Mic Bias",
168 "Headphone Jack", "HP_OUT";
169 mux-int-port = <1>;
170 mux-ext-port = <4>;
171 };
172};
173
174&audmux {
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_audmux>;
177 status = "okay";
178};
179
180&can1 {
181 pinctrl-names = "default";
182 pinctrl-0 = <&pinctrl_flexcan1>;
183 xceiver-supply = <®_can1_stby>;
184 status = "okay";
185};
186
187&clks {
188 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
189 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
190 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
191 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
192};
193
194&fec {
195 pinctrl-names = "default";
196 pinctrl-0 = <&pinctrl_enet>;
197 phy-mode = "rgmii-id";
198 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
199 status = "okay";
200};
201
202&gpmi {
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_gpmi_nand>;
205 status = "okay";
206};
207
208&hdmi {
209 ddc-i2c-bus = <&i2c3>;
210 status = "okay";
211};
212
213&i2c1 {
214 clock-frequency = <100000>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_i2c1>;
217 status = "okay";
218
219 gsc: gsc@20 {
220 compatible = "gw,gsc";
221 reg = <0x20>;
222 interrupt-parent = <&gpio1>;
223 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
224 interrupt-controller;
225 #interrupt-cells = <1>;
226 #size-cells = <0>;
227
228 adc {
229 compatible = "gw,gsc-adc";
230 #address-cells = <1>;
231 #size-cells = <0>;
232
233 channel@0 {
234 gw,mode = <0>;
235 reg = <0x00>;
236 label = "temp";
237 };
238
239 channel@2 {
240 gw,mode = <1>;
241 reg = <0x02>;
242 label = "vdd_vin";
243 };
244
245 channel@5 {
246 gw,mode = <1>;
247 reg = <0x05>;
248 label = "vdd_3p3";
249 };
250
251 channel@8 {
252 gw,mode = <1>;
253 reg = <0x08>;
254 label = "vdd_bat";
255 };
256
257 channel@b {
258 gw,mode = <1>;
259 reg = <0x0b>;
260 label = "vdd_5p0";
261 };
262
263 channel@e {
264 gw,mode = <1>;
265 reg = <0xe>;
266 label = "vdd_arm";
267 };
268
269 channel@11 {
270 gw,mode = <1>;
271 reg = <0x11>;
272 label = "vdd_soc";
273 };
274
275 channel@14 {
276 gw,mode = <1>;
277 reg = <0x14>;
278 label = "vdd_3p0";
279 };
280
281 channel@17 {
282 gw,mode = <1>;
283 reg = <0x17>;
284 label = "vdd_1p5";
285 };
286
287 channel@1d {
288 gw,mode = <1>;
289 reg = <0x1d>;
290 label = "vdd_1p8";
291 };
292
293 channel@20 {
294 gw,mode = <1>;
295 reg = <0x20>;
296 label = "vdd_1p0";
297 };
298
299 channel@23 {
300 gw,mode = <1>;
301 reg = <0x23>;
302 label = "vdd_2p5";
303 };
304
305 channel@26 {
306 gw,mode = <1>;
307 reg = <0x26>;
308 label = "vdd_gps";
309 };
310
311 channel@29 {
312 gw,mode = <1>;
313 reg = <0x29>;
314 label = "vdd_an1";
315 };
316 };
317 };
318
319 gsc_gpio: gpio@23 {
320 compatible = "nxp,pca9555";
321 reg = <0x23>;
322 gpio-controller;
323 #gpio-cells = <2>;
324 interrupt-parent = <&gsc>;
325 interrupts = <4>;
326 };
327
328 eeprom1: eeprom@50 {
329 compatible = "atmel,24c02";
330 reg = <0x50>;
331 pagesize = <16>;
332 };
333
334 eeprom2: eeprom@51 {
335 compatible = "atmel,24c02";
336 reg = <0x51>;
337 pagesize = <16>;
338 };
339
340 eeprom3: eeprom@52 {
341 compatible = "atmel,24c02";
342 reg = <0x52>;
343 pagesize = <16>;
344 };
345
346 eeprom4: eeprom@53 {
347 compatible = "atmel,24c02";
348 reg = <0x53>;
349 pagesize = <16>;
350 };
351
352 rtc: ds1672@68 {
353 compatible = "dallas,ds1672";
354 reg = <0x68>;
355 };
356};
357
358&i2c2 {
359 clock-frequency = <100000>;
360 pinctrl-names = "default";
361 pinctrl-0 = <&pinctrl_i2c2>;
362 status = "okay";
363
364 ltc3676: pmic@3c {
365 compatible = "lltc,ltc3676";
366 reg = <0x3c>;
367 interrupt-parent = <&gpio1>;
368 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
369
370 regulators {
371 /* VDD_SOC (1+R1/R2 = 1.635) */
372 reg_vdd_soc: sw1 {
373 regulator-name = "vddsoc";
374 regulator-min-microvolt = <674400>;
375 regulator-max-microvolt = <1308000>;
376 lltc,fb-voltage-divider = <127000 200000>;
377 regulator-ramp-delay = <7000>;
378 regulator-boot-on;
379 regulator-always-on;
380 };
381
382 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
383 reg_1p8v: sw2 {
384 regulator-name = "vdd1p8";
385 regulator-min-microvolt = <1033310>;
386 regulator-max-microvolt = <2004000>;
387 lltc,fb-voltage-divider = <301000 200000>;
388 regulator-ramp-delay = <7000>;
389 regulator-boot-on;
390 regulator-always-on;
391 };
392
393 /* VDD_ARM (1+R1/R2 = 1.635) */
394 reg_vdd_arm: sw3 {
395 regulator-name = "vddarm";
396 regulator-min-microvolt = <674400>;
397 regulator-max-microvolt = <1308000>;
398 lltc,fb-voltage-divider = <127000 200000>;
399 regulator-ramp-delay = <7000>;
400 regulator-boot-on;
401 regulator-always-on;
402 };
403
404 /* VDD_DDR (1+R1/R2 = 2.105) */
405 reg_vdd_ddr: sw4 {
406 regulator-name = "vddddr";
407 regulator-min-microvolt = <868310>;
408 regulator-max-microvolt = <1684000>;
409 lltc,fb-voltage-divider = <221000 200000>;
410 regulator-ramp-delay = <7000>;
411 regulator-boot-on;
412 regulator-always-on;
413 };
414
415 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
416 reg_2p5v: ldo2 {
417 regulator-name = "vdd2p5";
418 regulator-min-microvolt = <2490375>;
419 regulator-max-microvolt = <2490375>;
420 lltc,fb-voltage-divider = <487000 200000>;
421 regulator-boot-on;
422 regulator-always-on;
423 };
424
425 /* VDD_AUD_1P8: Audio codec */
426 reg_aud_1p8v: ldo3 {
427 regulator-name = "vdd1p8a";
428 regulator-min-microvolt = <1800000>;
429 regulator-max-microvolt = <1800000>;
430 regulator-boot-on;
431 };
432
433 /* VDD_HIGH (1+R1/R2 = 4.17) */
434 reg_3p0v: ldo4 {
435 regulator-name = "vdd3p0";
436 regulator-min-microvolt = <3023250>;
437 regulator-max-microvolt = <3023250>;
438 lltc,fb-voltage-divider = <634000 200000>;
439 regulator-boot-on;
440 regulator-always-on;
441 };
442 };
443 };
444};
445
446&i2c3 {
447 clock-frequency = <100000>;
448 pinctrl-names = "default";
449 pinctrl-0 = <&pinctrl_i2c3>;
450 status = "okay";
451
452 codec: sgtl5000@a {
453 compatible = "fsl,sgtl5000";
454 reg = <0x0a>;
455 clocks = <&clks IMX6QDL_CLK_CKO>;
456 VDDA-supply = <®_1p8v>;
457 VDDIO-supply = <®_3p3v>;
458 };
459
460 touchscreen: egalax_ts@4 {
461 compatible = "eeti,egalax_ts";
462 reg = <0x04>;
463 interrupt-parent = <&gpio1>;
464 interrupts = <11 2>;
465 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
466 };
467
468 accel@1e {
469 compatible = "nxp,fxos8700";
470 reg = <0x1e>;
471 };
472};
473
474&ldb {
475 status = "okay";
476
477 lvds-channel@0 {
478 fsl,data-mapping = "spwg";
479 fsl,data-width = <18>;
480 status = "okay";
481
482 display-timings {
483 native-mode = <&timing0>;
484 timing0: hsd100pxn1 {
485 clock-frequency = <65000000>;
486 hactive = <1024>;
487 vactive = <768>;
488 hback-porch = <220>;
489 hfront-porch = <40>;
490 vback-porch = <21>;
491 vfront-porch = <7>;
492 hsync-len = <60>;
493 vsync-len = <10>;
494 };
495 };
496 };
497};
498
499&pcie {
500 pinctrl-names = "default";
501 pinctrl-0 = <&pinctrl_pcie>;
502 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
503 status = "okay";
504};
505
506&pwm2 {
507 pinctrl-names = "default";
508 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
509 status = "disabled";
510};
511
512&pwm3 {
513 pinctrl-names = "default";
514 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
515 status = "disabled";
516};
517
518&pwm4 {
519 #pwm-cells = <2>;
520 pinctrl-names = "default";
521 pinctrl-0 = <&pinctrl_pwm4>;
522 status = "okay";
523};
524
525&ssi1 {
526 status = "okay";
527};
528
529&uart1 {
530 pinctrl-names = "default";
531 pinctrl-0 = <&pinctrl_uart1>;
532 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
533 status = "okay";
534};
535
536&uart2 {
537 pinctrl-names = "default";
538 pinctrl-0 = <&pinctrl_uart2>;
539 status = "okay";
540};
541
542&uart5 {
543 pinctrl-names = "default";
544 pinctrl-0 = <&pinctrl_uart5>;
545 status = "okay";
546};
547
548&usbotg {
549 vbus-supply = <®_usb_otg_vbus>;
550 pinctrl-names = "default";
551 pinctrl-0 = <&pinctrl_usbotg>;
552 disable-over-current;
553 status = "okay";
554};
555
556&usbh1 {
557 vbus-supply = <®_usb_h1_vbus>;
558 status = "okay";
559};
560
561&usdhc3 {
562 pinctrl-names = "default", "state_100mhz", "state_200mhz";
563 pinctrl-0 = <&pinctrl_usdhc3>;
564 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
565 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
566 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
567 vmmc-supply = <®_3p3v>;
568 no-1-8-v; /* firmware will remove if board revision supports */
569 status = "okay";
570};
571
572&wdog1 {
573 pinctrl-names = "default";
574 pinctrl-0 = <&pinctrl_wdog>;
575 fsl,ext-reset-output;
576};
577
578&iomuxc {
579 pinctrl_audmux: audmuxgrp {
580 fsl,pins = <
581 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
582 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
583 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
584 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
585 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
586 >;
587 };
588
589 pinctrl_enet: enetgrp {
590 fsl,pins = <
591 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
592 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
593 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
594 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
595 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
596 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
597 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
598 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
599 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
600 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
601 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
602 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
603 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
604 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
605 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
606 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
607 >;
608 };
609
610 pinctrl_flexcan1: flexcan1grp {
611 fsl,pins = <
612 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
613 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
614 >;
615 };
616
617 pinctrl_gpio_leds: gpioledsgrp {
618 fsl,pins = <
619 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
620 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
621 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
622 >;
623 };
624
625 pinctrl_gpmi_nand: gpminandgrp {
626 fsl,pins = <
627 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
628 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
629 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
630 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
631 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
632 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
633 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
634 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
635 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
636 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
637 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
638 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
639 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
640 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
641 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
642 >;
643 };
644
645 pinctrl_i2c1: i2c1grp {
646 fsl,pins = <
647 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
648 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
649 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
650 >;
651 };
652
653 pinctrl_i2c2: i2c2grp {
654 fsl,pins = <
655 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
656 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
657 >;
658 };
659
660 pinctrl_i2c3: i2c3grp {
661 fsl,pins = <
662 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
663 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
664 >;
665 };
666
667 pinctrl_pcie: pciegrp {
668 fsl,pins = <
669 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
670 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
671 >;
672 };
673
674 pinctrl_pmic: pmicgrp {
675 fsl,pins = <
676 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
677 >;
678 };
679
680 pinctrl_pps: ppsgrp {
681 fsl,pins = <
682 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
683 >;
684 };
685
686 pinctrl_pwm2: pwm2grp {
687 fsl,pins = <
688 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
689 >;
690 };
691
692 pinctrl_pwm3: pwm3grp {
693 fsl,pins = <
694 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
695 >;
696 };
697
698 pinctrl_pwm4: pwm4grp {
699 fsl,pins = <
700 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
701 >;
702 };
703
704 pinctrl_reg_can1: regcan1grp {
705 fsl,pins = <
706 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
707 >;
708 };
709
710 pinctrl_uart1: uart1grp {
711 fsl,pins = <
712 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
713 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
714 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
715 >;
716 };
717
718 pinctrl_uart2: uart2grp {
719 fsl,pins = <
720 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
721 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
722 >;
723 };
724
725 pinctrl_uart5: uart5grp {
726 fsl,pins = <
727 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
728 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
729 >;
730 };
731
732 pinctrl_usbotg: usbotggrp {
733 fsl,pins = <
734 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
735 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
736 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
737 >;
738 };
739
740 pinctrl_usdhc3: usdhc3grp {
741 fsl,pins = <
742 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
743 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
744 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
745 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
746 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
747 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
748 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
749 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
750 >;
751 };
752
753 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
754 fsl,pins = <
755 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
756 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
757 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
758 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
759 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
760 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
761 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
762 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
763 >;
764 };
765
766 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
767 fsl,pins = <
768 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
769 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
770 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
771 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
772 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
773 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
774 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
775 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
776 >;
777 };
778
779 pinctrl_wdog: wdoggrp {
780 fsl,pins = <
781 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
782 >;
783 };
784};
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11 /* these are used by bootloader for disabling nodes */
12 aliases {
13 led0 = &led0;
14 led1 = &led1;
15 led2 = &led2;
16 nand = &gpmi;
17 ssi0 = &ssi1;
18 usb0 = &usbh1;
19 usb1 = &usbotg;
20 };
21
22 chosen {
23 bootargs = "console=ttymxc1,115200";
24 };
25
26 backlight {
27 compatible = "pwm-backlight";
28 pwms = <&pwm4 0 5000000>;
29 brightness-levels = <0 4 8 16 32 64 128 255>;
30 default-brightness-level = <7>;
31 };
32
33 gpio-keys {
34 compatible = "gpio-keys";
35
36 user-pb {
37 label = "user_pb";
38 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
39 linux,code = <BTN_0>;
40 };
41
42 user-pb1x {
43 label = "user_pb1x";
44 linux,code = <BTN_1>;
45 interrupt-parent = <&gsc>;
46 interrupts = <0>;
47 };
48
49 key-erased {
50 label = "key-erased";
51 linux,code = <BTN_2>;
52 interrupt-parent = <&gsc>;
53 interrupts = <1>;
54 };
55
56 eeprom-wp {
57 label = "eeprom_wp";
58 linux,code = <BTN_3>;
59 interrupt-parent = <&gsc>;
60 interrupts = <2>;
61 };
62
63 tamper {
64 label = "tamper";
65 linux,code = <BTN_4>;
66 interrupt-parent = <&gsc>;
67 interrupts = <5>;
68 };
69
70 switch-hold {
71 label = "switch_hold";
72 linux,code = <BTN_5>;
73 interrupt-parent = <&gsc>;
74 interrupts = <7>;
75 };
76 };
77
78 leds {
79 compatible = "gpio-leds";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_gpio_leds>;
82
83 led0: user1 {
84 label = "user1";
85 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
86 default-state = "on";
87 linux,default-trigger = "heartbeat";
88 };
89
90 led1: user2 {
91 label = "user2";
92 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
93 default-state = "off";
94 };
95
96 led2: user3 {
97 label = "user3";
98 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
99 default-state = "off";
100 };
101 };
102
103 memory@10000000 {
104 device_type = "memory";
105 reg = <0x10000000 0x40000000>;
106 };
107
108 pps {
109 compatible = "pps-gpio";
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_pps>;
112 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
113 status = "okay";
114 };
115
116 reg_1p0v: regulator-1p0v {
117 compatible = "regulator-fixed";
118 regulator-name = "1P0V";
119 regulator-min-microvolt = <1000000>;
120 regulator-max-microvolt = <1000000>;
121 regulator-always-on;
122 };
123
124 reg_3p3v: regulator-3p3v {
125 compatible = "regulator-fixed";
126 regulator-name = "3P3V";
127 regulator-min-microvolt = <3300000>;
128 regulator-max-microvolt = <3300000>;
129 regulator-always-on;
130 };
131
132 reg_usb_h1_vbus: regulator-usb-h1-vbus {
133 compatible = "regulator-fixed";
134 regulator-name = "usb_h1_vbus";
135 regulator-min-microvolt = <5000000>;
136 regulator-max-microvolt = <5000000>;
137 regulator-always-on;
138 };
139
140 reg_usb_otg_vbus: regulator-usb-otg-vbus {
141 compatible = "regulator-fixed";
142 regulator-name = "usb_otg_vbus";
143 regulator-min-microvolt = <5000000>;
144 regulator-max-microvolt = <5000000>;
145 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
146 enable-active-high;
147 };
148
149 sound {
150 compatible = "fsl,imx6q-ventana-sgtl5000",
151 "fsl,imx-audio-sgtl5000";
152 model = "sgtl5000-audio";
153 ssi-controller = <&ssi1>;
154 audio-codec = <&codec>;
155 audio-routing =
156 "MIC_IN", "Mic Jack",
157 "Mic Jack", "Mic Bias",
158 "Headphone Jack", "HP_OUT";
159 mux-int-port = <1>;
160 mux-ext-port = <4>;
161 };
162};
163
164&audmux {
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_audmux>;
167 status = "okay";
168};
169
170&can1 {
171 pinctrl-names = "default";
172 pinctrl-0 = <&pinctrl_flexcan1>;
173 status = "okay";
174};
175
176&clks {
177 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
178 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
179 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
180 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
181};
182
183&fec {
184 pinctrl-names = "default";
185 pinctrl-0 = <&pinctrl_enet>;
186 phy-mode = "rgmii-id";
187 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
188 status = "okay";
189};
190
191&gpmi {
192 pinctrl-names = "default";
193 pinctrl-0 = <&pinctrl_gpmi_nand>;
194 status = "okay";
195};
196
197&hdmi {
198 ddc-i2c-bus = <&i2c3>;
199 status = "okay";
200};
201
202&i2c1 {
203 clock-frequency = <100000>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_i2c1>;
206 status = "okay";
207
208 gsc: gsc@20 {
209 compatible = "gw,gsc";
210 reg = <0x20>;
211 interrupt-parent = <&gpio1>;
212 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
213 interrupt-controller;
214 #interrupt-cells = <1>;
215 #size-cells = <0>;
216
217 adc {
218 compatible = "gw,gsc-adc";
219 #address-cells = <1>;
220 #size-cells = <0>;
221
222 channel@0 {
223 gw,mode = <0>;
224 reg = <0x00>;
225 label = "temp";
226 };
227
228 channel@2 {
229 gw,mode = <1>;
230 reg = <0x02>;
231 label = "vdd_vin";
232 };
233
234 channel@5 {
235 gw,mode = <1>;
236 reg = <0x05>;
237 label = "vdd_3p3";
238 };
239
240 channel@8 {
241 gw,mode = <1>;
242 reg = <0x08>;
243 label = "vdd_bat";
244 };
245
246 channel@b {
247 gw,mode = <1>;
248 reg = <0x0b>;
249 label = "vdd_5p0";
250 };
251
252 channel@e {
253 gw,mode = <1>;
254 reg = <0xe>;
255 label = "vdd_arm";
256 };
257
258 channel@11 {
259 gw,mode = <1>;
260 reg = <0x11>;
261 label = "vdd_soc";
262 };
263
264 channel@14 {
265 gw,mode = <1>;
266 reg = <0x14>;
267 label = "vdd_3p0";
268 };
269
270 channel@17 {
271 gw,mode = <1>;
272 reg = <0x17>;
273 label = "vdd_1p5";
274 };
275
276 channel@1d {
277 gw,mode = <1>;
278 reg = <0x1d>;
279 label = "vdd_1p8";
280 };
281
282 channel@20 {
283 gw,mode = <1>;
284 reg = <0x20>;
285 label = "vdd_1p0";
286 };
287
288 channel@23 {
289 gw,mode = <1>;
290 reg = <0x23>;
291 label = "vdd_2p5";
292 };
293
294 channel@26 {
295 gw,mode = <1>;
296 reg = <0x26>;
297 label = "vdd_gps";
298 };
299
300 channel@29 {
301 gw,mode = <1>;
302 reg = <0x29>;
303 label = "vdd_an1";
304 };
305 };
306 };
307
308 gsc_gpio: gpio@23 {
309 compatible = "nxp,pca9555";
310 reg = <0x23>;
311 gpio-controller;
312 #gpio-cells = <2>;
313 interrupt-parent = <&gsc>;
314 interrupts = <4>;
315 };
316
317 eeprom1: eeprom@50 {
318 compatible = "atmel,24c02";
319 reg = <0x50>;
320 pagesize = <16>;
321 };
322
323 eeprom2: eeprom@51 {
324 compatible = "atmel,24c02";
325 reg = <0x51>;
326 pagesize = <16>;
327 };
328
329 eeprom3: eeprom@52 {
330 compatible = "atmel,24c02";
331 reg = <0x52>;
332 pagesize = <16>;
333 };
334
335 eeprom4: eeprom@53 {
336 compatible = "atmel,24c02";
337 reg = <0x53>;
338 pagesize = <16>;
339 };
340
341 rtc: ds1672@68 {
342 compatible = "dallas,ds1672";
343 reg = <0x68>;
344 };
345};
346
347&i2c2 {
348 clock-frequency = <100000>;
349 pinctrl-names = "default";
350 pinctrl-0 = <&pinctrl_i2c2>;
351 status = "okay";
352
353 ltc3676: pmic@3c {
354 compatible = "lltc,ltc3676";
355 reg = <0x3c>;
356 interrupt-parent = <&gpio1>;
357 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
358
359 regulators {
360 /* VDD_SOC (1+R1/R2 = 1.635) */
361 reg_vdd_soc: sw1 {
362 regulator-name = "vddsoc";
363 regulator-min-microvolt = <674400>;
364 regulator-max-microvolt = <1308000>;
365 lltc,fb-voltage-divider = <127000 200000>;
366 regulator-ramp-delay = <7000>;
367 regulator-boot-on;
368 regulator-always-on;
369 };
370
371 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
372 reg_1p8v: sw2 {
373 regulator-name = "vdd1p8";
374 regulator-min-microvolt = <1033310>;
375 regulator-max-microvolt = <2004000>;
376 lltc,fb-voltage-divider = <301000 200000>;
377 regulator-ramp-delay = <7000>;
378 regulator-boot-on;
379 regulator-always-on;
380 };
381
382 /* VDD_ARM (1+R1/R2 = 1.635) */
383 reg_vdd_arm: sw3 {
384 regulator-name = "vddarm";
385 regulator-min-microvolt = <674400>;
386 regulator-max-microvolt = <1308000>;
387 lltc,fb-voltage-divider = <127000 200000>;
388 regulator-ramp-delay = <7000>;
389 regulator-boot-on;
390 regulator-always-on;
391 };
392
393 /* VDD_DDR (1+R1/R2 = 2.105) */
394 reg_vdd_ddr: sw4 {
395 regulator-name = "vddddr";
396 regulator-min-microvolt = <868310>;
397 regulator-max-microvolt = <1684000>;
398 lltc,fb-voltage-divider = <221000 200000>;
399 regulator-ramp-delay = <7000>;
400 regulator-boot-on;
401 regulator-always-on;
402 };
403
404 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
405 reg_2p5v: ldo2 {
406 regulator-name = "vdd2p5";
407 regulator-min-microvolt = <2490375>;
408 regulator-max-microvolt = <2490375>;
409 lltc,fb-voltage-divider = <487000 200000>;
410 regulator-boot-on;
411 regulator-always-on;
412 };
413
414 /* VDD_AUD_1P8: Audio codec */
415 reg_aud_1p8v: ldo3 {
416 regulator-name = "vdd1p8a";
417 regulator-min-microvolt = <1800000>;
418 regulator-max-microvolt = <1800000>;
419 regulator-boot-on;
420 };
421
422 /* VDD_HIGH (1+R1/R2 = 4.17) */
423 reg_3p0v: ldo4 {
424 regulator-name = "vdd3p0";
425 regulator-min-microvolt = <3023250>;
426 regulator-max-microvolt = <3023250>;
427 lltc,fb-voltage-divider = <634000 200000>;
428 regulator-boot-on;
429 regulator-always-on;
430 };
431 };
432 };
433};
434
435&i2c3 {
436 clock-frequency = <100000>;
437 pinctrl-names = "default";
438 pinctrl-0 = <&pinctrl_i2c3>;
439 status = "okay";
440
441 codec: sgtl5000@a {
442 compatible = "fsl,sgtl5000";
443 reg = <0x0a>;
444 clocks = <&clks IMX6QDL_CLK_CKO>;
445 VDDA-supply = <®_1p8v>;
446 VDDIO-supply = <®_3p3v>;
447 };
448
449 touchscreen: egalax_ts@4 {
450 compatible = "eeti,egalax_ts";
451 reg = <0x04>;
452 interrupt-parent = <&gpio1>;
453 interrupts = <11 2>;
454 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
455 };
456
457 accel@1e {
458 compatible = "nxp,fxos8700";
459 reg = <0x1e>;
460 };
461};
462
463&ldb {
464 status = "okay";
465
466 lvds-channel@0 {
467 fsl,data-mapping = "spwg";
468 fsl,data-width = <18>;
469 status = "okay";
470
471 display-timings {
472 native-mode = <&timing0>;
473 timing0: hsd100pxn1 {
474 clock-frequency = <65000000>;
475 hactive = <1024>;
476 vactive = <768>;
477 hback-porch = <220>;
478 hfront-porch = <40>;
479 vback-porch = <21>;
480 vfront-porch = <7>;
481 hsync-len = <60>;
482 vsync-len = <10>;
483 };
484 };
485 };
486};
487
488&pcie {
489 pinctrl-names = "default";
490 pinctrl-0 = <&pinctrl_pcie>;
491 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
492 status = "okay";
493};
494
495&pwm2 {
496 pinctrl-names = "default";
497 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
498 status = "disabled";
499};
500
501&pwm3 {
502 pinctrl-names = "default";
503 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
504 status = "disabled";
505};
506
507&pwm4 {
508 #pwm-cells = <2>;
509 pinctrl-names = "default";
510 pinctrl-0 = <&pinctrl_pwm4>;
511 status = "okay";
512};
513
514&ssi1 {
515 status = "okay";
516};
517
518&uart1 {
519 pinctrl-names = "default";
520 pinctrl-0 = <&pinctrl_uart1>;
521 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
522 status = "okay";
523};
524
525&uart2 {
526 pinctrl-names = "default";
527 pinctrl-0 = <&pinctrl_uart2>;
528 status = "okay";
529};
530
531&uart5 {
532 pinctrl-names = "default";
533 pinctrl-0 = <&pinctrl_uart5>;
534 status = "okay";
535};
536
537&usbotg {
538 vbus-supply = <®_usb_otg_vbus>;
539 pinctrl-names = "default";
540 pinctrl-0 = <&pinctrl_usbotg>;
541 disable-over-current;
542 status = "okay";
543};
544
545&usbh1 {
546 vbus-supply = <®_usb_h1_vbus>;
547 status = "okay";
548};
549
550&usdhc3 {
551 pinctrl-names = "default", "state_100mhz", "state_200mhz";
552 pinctrl-0 = <&pinctrl_usdhc3>;
553 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
554 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
555 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
556 vmmc-supply = <®_3p3v>;
557 no-1-8-v; /* firmware will remove if board revision supports */
558 status = "okay";
559};
560
561&wdog1 {
562 pinctrl-names = "default";
563 pinctrl-0 = <&pinctrl_wdog>;
564 fsl,ext-reset-output;
565};
566
567&iomuxc {
568 pinctrl_audmux: audmuxgrp {
569 fsl,pins = <
570 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
571 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
572 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
573 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
574 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
575 >;
576 };
577
578 pinctrl_enet: enetgrp {
579 fsl,pins = <
580 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
581 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
582 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
583 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
584 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
585 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
586 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
587 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
588 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
589 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
590 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
591 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
592 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
593 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
594 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
595 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
596 >;
597 };
598
599 pinctrl_flexcan1: flexcan1grp {
600 fsl,pins = <
601 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
602 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
603 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
604 >;
605 };
606
607 pinctrl_gpio_leds: gpioledsgrp {
608 fsl,pins = <
609 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
610 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
611 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
612 >;
613 };
614
615 pinctrl_gpmi_nand: gpminandgrp {
616 fsl,pins = <
617 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
618 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
619 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
620 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
621 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
622 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
623 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
624 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
625 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
626 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
627 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
628 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
629 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
630 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
631 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
632 >;
633 };
634
635 pinctrl_i2c1: i2c1grp {
636 fsl,pins = <
637 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
638 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
639 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
640 >;
641 };
642
643 pinctrl_i2c2: i2c2grp {
644 fsl,pins = <
645 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
646 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
647 >;
648 };
649
650 pinctrl_i2c3: i2c3grp {
651 fsl,pins = <
652 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
653 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
654 >;
655 };
656
657 pinctrl_pcie: pciegrp {
658 fsl,pins = <
659 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
660 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
661 >;
662 };
663
664 pinctrl_pmic: pmicgrp {
665 fsl,pins = <
666 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
667 >;
668 };
669
670 pinctrl_pps: ppsgrp {
671 fsl,pins = <
672 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
673 >;
674 };
675
676 pinctrl_pwm2: pwm2grp {
677 fsl,pins = <
678 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
679 >;
680 };
681
682 pinctrl_pwm3: pwm3grp {
683 fsl,pins = <
684 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
685 >;
686 };
687
688 pinctrl_pwm4: pwm4grp {
689 fsl,pins = <
690 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
691 >;
692 };
693
694 pinctrl_uart1: uart1grp {
695 fsl,pins = <
696 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
697 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
698 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
699 >;
700 };
701
702 pinctrl_uart2: uart2grp {
703 fsl,pins = <
704 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
705 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
706 >;
707 };
708
709 pinctrl_uart5: uart5grp {
710 fsl,pins = <
711 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
712 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
713 >;
714 };
715
716 pinctrl_usbotg: usbotggrp {
717 fsl,pins = <
718 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
719 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
720 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
721 >;
722 };
723
724 pinctrl_usdhc3: usdhc3grp {
725 fsl,pins = <
726 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
727 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
728 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
729 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
730 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
731 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
732 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
733 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
734 >;
735 };
736
737 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
738 fsl,pins = <
739 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
740 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
741 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
742 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
743 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
744 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
745 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
746 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
747 >;
748 };
749
750 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
751 fsl,pins = <
752 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
753 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
754 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
755 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
756 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
757 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
758 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
759 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
760 >;
761 };
762
763 pinctrl_wdog: wdoggrp {
764 fsl,pins = <
765 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
766 >;
767 };
768};