Loading...
1/*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39 model = "NorthStar Plus SVK (BCM988312HR)";
40 compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
41
42 chosen {
43 stdout-path = "serial0:115200n8";
44 };
45
46 memory@60000000 {
47 device_type = "memory";
48 reg = <0x60000000 0x80000000>;
49 };
50
51 gpio-restart {
52 compatible = "gpio-restart";
53 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
54 open-source;
55 priority = <200>;
56 };
57};
58
59/* USB 3 support needed to be complete */
60
61&dma {
62 status = "okay";
63};
64
65&amac0 {
66 status = "okay";
67};
68
69&amac1 {
70 status = "okay";
71};
72
73&amac2 {
74 status = "okay";
75};
76
77&ehci0 {
78 status = "okay";
79};
80
81&nand_controller {
82 nand@0 {
83 compatible = "brcm,nandcs";
84 reg = <0>;
85 nand-on-flash-bbt;
86
87 #address-cells = <1>;
88 #size-cells = <1>;
89
90 nand-ecc-strength = <24>;
91 nand-ecc-step-size = <1024>;
92
93 brcm,nand-oob-sector-size = <27>;
94
95 partition@0 {
96 label = "nboot";
97 reg = <0x00000000 0x00200000>;
98 read-only;
99 };
100 partition@200000 {
101 label = "nenv";
102 reg = <0x00200000 0x00400000>;
103 };
104 partition@600000 {
105 label = "nsystem";
106 reg = <0x00600000 0x00a00000>;
107 };
108 partition@1000000 {
109 label = "nrootfs";
110 reg = <0x01000000 0x03000000>;
111 };
112 partition@4000000 {
113 label = "ncustfs";
114 reg = <0x04000000 0x3c000000>;
115 };
116 };
117};
118
119&ohci0 {
120 status = "okay";
121};
122
123&pcie0 {
124 status = "okay";
125};
126
127&pcie1 {
128 status = "okay";
129};
130
131&pinctrl {
132 pinctrl-names = "default";
133 pinctrl-0 = <&nand_sel>;
134 nand_sel: nand_sel {
135 function = "nand";
136 groups = "nand_grp";
137 };
138};
139
140&qspi {
141 status = "okay";
142 bspi-sel = <0>;
143 flash: flash@0 {
144 #address-cells = <1>;
145 #size-cells = <1>;
146 compatible = "m25p80";
147 reg = <0x0>;
148 spi-max-frequency = <12500000>;
149 m25p,fast-read;
150 spi-cpol;
151 spi-cpha;
152
153 partition@0 {
154 label = "boot";
155 reg = <0x00000000 0x000a0000>;
156 };
157
158 partition@a0000 {
159 label = "env";
160 reg = <0x000a0000 0x00060000>;
161 };
162
163 partition@100000 {
164 label = "system";
165 reg = <0x00100000 0x00600000>;
166 };
167
168 partition@700000 {
169 label = "rootfs";
170 reg = <0x00700000 0x01900000>;
171 };
172 };
173};
174
175&sata_phy0 {
176 status = "okay";
177};
178
179&sata_phy1 {
180 status = "okay";
181};
182
183&sata {
184 status = "okay";
185};
186
187&srab {
188 compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
189 status = "okay";
190
191 ports {
192 port@0 {
193 label = "port0";
194 reg = <0>;
195 };
196
197 port@1 {
198 label = "port1";
199 reg = <1>;
200 };
201
202 port@2 {
203 label = "port2";
204 reg = <2>;
205 };
206
207 port@3 {
208 label = "port3";
209 reg = <3>;
210 };
211
212 port@4 {
213 label = "port4";
214 reg = <4>;
215 };
216
217 port@8 {
218 ethernet = <&amac2>;
219 label = "cpu";
220 reg = <8>;
221 fixed-link {
222 speed = <1000>;
223 full-duplex;
224 };
225 };
226 };
227};
228
229&uart0 {
230 status = "okay";
231};
1/*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39 model = "NorthStar Plus SVK (BCM988312HR)";
40 compatible = "brcm,bcm88312", "brcm,nsp";
41
42 chosen {
43 stdout-path = "serial0:115200n8";
44 };
45
46 memory@60000000 {
47 device_type = "memory";
48 reg = <0x60000000 0x80000000>;
49 };
50
51 gpio-restart {
52 compatible = "gpio-restart";
53 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
54 open-source;
55 priority = <200>;
56 };
57};
58
59/* USB 3 support needed to be complete */
60
61&amac0 {
62 status = "okay";
63};
64
65&amac1 {
66 status = "okay";
67};
68
69&amac2 {
70 status = "okay";
71};
72
73&ehci0 {
74 status = "okay";
75};
76
77&nand_controller {
78 nand@0 {
79 compatible = "brcm,nandcs";
80 reg = <0>;
81 nand-on-flash-bbt;
82
83 #address-cells = <1>;
84 #size-cells = <1>;
85
86 nand-ecc-strength = <24>;
87 nand-ecc-step-size = <1024>;
88
89 brcm,nand-oob-sector-size = <27>;
90
91 partition@0 {
92 label = "nboot";
93 reg = <0x00000000 0x00200000>;
94 read-only;
95 };
96 partition@200000 {
97 label = "nenv";
98 reg = <0x00200000 0x00400000>;
99 };
100 partition@600000 {
101 label = "nsystem";
102 reg = <0x00600000 0x00a00000>;
103 };
104 partition@1000000 {
105 label = "nrootfs";
106 reg = <0x01000000 0x03000000>;
107 };
108 partition@4000000 {
109 label = "ncustfs";
110 reg = <0x04000000 0x3c000000>;
111 };
112 };
113};
114
115&ohci0 {
116 status = "okay";
117};
118
119&pcie0 {
120 status = "okay";
121};
122
123&pcie1 {
124 status = "okay";
125};
126
127&pinctrl {
128 pinctrl-names = "default";
129 pinctrl-0 = <&nand_sel>;
130 nand_sel: nand_sel {
131 function = "nand";
132 groups = "nand_grp";
133 };
134};
135
136&qspi {
137 bspi-sel = <0>;
138 flash: m25p80@0 {
139 #address-cells = <1>;
140 #size-cells = <1>;
141 compatible = "m25p80";
142 reg = <0x0>;
143 spi-max-frequency = <12500000>;
144 m25p,fast-read;
145 spi-cpol;
146 spi-cpha;
147
148 partition@0 {
149 label = "boot";
150 reg = <0x00000000 0x000a0000>;
151 };
152
153 partition@a0000 {
154 label = "env";
155 reg = <0x000a0000 0x00060000>;
156 };
157
158 partition@100000 {
159 label = "system";
160 reg = <0x00100000 0x00600000>;
161 };
162
163 partition@700000 {
164 label = "rootfs";
165 reg = <0x00700000 0x01900000>;
166 };
167 };
168};
169
170&sata_phy0 {
171 status = "okay";
172};
173
174&sata_phy1 {
175 status = "okay";
176};
177
178&sata {
179 status = "okay";
180};
181
182&srab {
183 compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
184 status = "okay";
185
186 ports {
187 port@0 {
188 label = "port0";
189 reg = <0>;
190 };
191
192 port@1 {
193 label = "port1";
194 reg = <1>;
195 };
196
197 port@2 {
198 label = "port2";
199 reg = <2>;
200 };
201
202 port@3 {
203 label = "port3";
204 reg = <3>;
205 };
206
207 port@4 {
208 label = "port4";
209 reg = <4>;
210 };
211
212 port@8 {
213 ethernet = <&amac2>;
214 label = "cpu";
215 reg = <8>;
216 fixed-link {
217 speed = <1000>;
218 full-duplex;
219 };
220 };
221 };
222};
223
224&uart0 {
225 status = "okay";
226};