Loading...
1/*
2 * Copyright (C) 2014 Red Hat
3 * Copyright (C) 2014 Intel Corp.
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining a
6 * copy of this software and associated documentation files (the "Software"),
7 * to deal in the Software without restriction, including without limitation
8 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
9 * and/or sell copies of the Software, and to permit persons to whom the
10 * Software is furnished to do so, subject to the following conditions:
11 *
12 * The above copyright notice and this permission notice shall be included in
13 * all copies or substantial portions of the Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
19 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
20 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
21 * OTHER DEALINGS IN THE SOFTWARE.
22 *
23 * Authors:
24 * Rob Clark <robdclark@gmail.com>
25 * Daniel Vetter <daniel.vetter@ffwll.ch>
26 */
27
28#ifndef DRM_ATOMIC_H_
29#define DRM_ATOMIC_H_
30
31#include <drm/drm_crtc.h>
32#include <drm/drm_util.h>
33
34/**
35 * struct drm_crtc_commit - track modeset commits on a CRTC
36 *
37 * This structure is used to track pending modeset changes and atomic commit on
38 * a per-CRTC basis. Since updating the list should never block, this structure
39 * is reference counted to allow waiters to safely wait on an event to complete,
40 * without holding any locks.
41 *
42 * It has 3 different events in total to allow a fine-grained synchronization
43 * between outstanding updates::
44 *
45 * atomic commit thread hardware
46 *
47 * write new state into hardware ----> ...
48 * signal hw_done
49 * switch to new state on next
50 * ... v/hblank
51 *
52 * wait for buffers to show up ...
53 *
54 * ... send completion irq
55 * irq handler signals flip_done
56 * cleanup old buffers
57 *
58 * signal cleanup_done
59 *
60 * wait for flip_done <----
61 * clean up atomic state
62 *
63 * The important bit to know is that &cleanup_done is the terminal event, but the
64 * ordering between &flip_done and &hw_done is entirely up to the specific driver
65 * and modeset state change.
66 *
67 * For an implementation of how to use this look at
68 * drm_atomic_helper_setup_commit() from the atomic helper library.
69 *
70 * See also drm_crtc_commit_wait().
71 */
72struct drm_crtc_commit {
73 /**
74 * @crtc:
75 *
76 * DRM CRTC for this commit.
77 */
78 struct drm_crtc *crtc;
79
80 /**
81 * @ref:
82 *
83 * Reference count for this structure. Needed to allow blocking on
84 * completions without the risk of the completion disappearing
85 * meanwhile.
86 */
87 struct kref ref;
88
89 /**
90 * @flip_done:
91 *
92 * Will be signaled when the hardware has flipped to the new set of
93 * buffers. Signals at the same time as when the drm event for this
94 * commit is sent to userspace, or when an out-fence is singalled. Note
95 * that for most hardware, in most cases this happens after @hw_done is
96 * signalled.
97 *
98 * Completion of this stage is signalled implicitly by calling
99 * drm_crtc_send_vblank_event() on &drm_crtc_state.event.
100 */
101 struct completion flip_done;
102
103 /**
104 * @hw_done:
105 *
106 * Will be signalled when all hw register changes for this commit have
107 * been written out. Especially when disabling a pipe this can be much
108 * later than @flip_done, since that can signal already when the
109 * screen goes black, whereas to fully shut down a pipe more register
110 * I/O is required.
111 *
112 * Note that this does not need to include separately reference-counted
113 * resources like backing storage buffer pinning, or runtime pm
114 * management.
115 *
116 * Drivers should call drm_atomic_helper_commit_hw_done() to signal
117 * completion of this stage.
118 */
119 struct completion hw_done;
120
121 /**
122 * @cleanup_done:
123 *
124 * Will be signalled after old buffers have been cleaned up by calling
125 * drm_atomic_helper_cleanup_planes(). Since this can only happen after
126 * a vblank wait completed it might be a bit later. This completion is
127 * useful to throttle updates and avoid hardware updates getting ahead
128 * of the buffer cleanup too much.
129 *
130 * Drivers should call drm_atomic_helper_commit_cleanup_done() to signal
131 * completion of this stage.
132 */
133 struct completion cleanup_done;
134
135 /**
136 * @commit_entry:
137 *
138 * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
139 * $drm_crtc.commit_lock.
140 */
141 struct list_head commit_entry;
142
143 /**
144 * @event:
145 *
146 * &drm_pending_vblank_event pointer to clean up private events.
147 */
148 struct drm_pending_vblank_event *event;
149
150 /**
151 * @abort_completion:
152 *
153 * A flag that's set after drm_atomic_helper_setup_commit() takes a
154 * second reference for the completion of $drm_crtc_state.event. It's
155 * used by the free code to remove the second reference if commit fails.
156 */
157 bool abort_completion;
158};
159
160struct __drm_planes_state {
161 struct drm_plane *ptr;
162 struct drm_plane_state *state, *old_state, *new_state;
163};
164
165struct __drm_crtcs_state {
166 struct drm_crtc *ptr;
167 struct drm_crtc_state *state, *old_state, *new_state;
168
169 /**
170 * @commit:
171 *
172 * A reference to the CRTC commit object that is kept for use by
173 * drm_atomic_helper_wait_for_flip_done() after
174 * drm_atomic_helper_commit_hw_done() is called. This ensures that a
175 * concurrent commit won't free a commit object that is still in use.
176 */
177 struct drm_crtc_commit *commit;
178
179 s32 __user *out_fence_ptr;
180 u64 last_vblank_count;
181};
182
183struct __drm_connnectors_state {
184 struct drm_connector *ptr;
185 struct drm_connector_state *state, *old_state, *new_state;
186 /**
187 * @out_fence_ptr:
188 *
189 * User-provided pointer which the kernel uses to return a sync_file
190 * file descriptor. Used by writeback connectors to signal completion of
191 * the writeback.
192 */
193 s32 __user *out_fence_ptr;
194};
195
196struct drm_private_obj;
197struct drm_private_state;
198
199/**
200 * struct drm_private_state_funcs - atomic state functions for private objects
201 *
202 * These hooks are used by atomic helpers to create, swap and destroy states of
203 * private objects. The structure itself is used as a vtable to identify the
204 * associated private object type. Each private object type that needs to be
205 * added to the atomic states is expected to have an implementation of these
206 * hooks and pass a pointer to its drm_private_state_funcs struct to
207 * drm_atomic_get_private_obj_state().
208 */
209struct drm_private_state_funcs {
210 /**
211 * @atomic_duplicate_state:
212 *
213 * Duplicate the current state of the private object and return it. It
214 * is an error to call this before obj->state has been initialized.
215 *
216 * RETURNS:
217 *
218 * Duplicated atomic state or NULL when obj->state is not
219 * initialized or allocation failed.
220 */
221 struct drm_private_state *(*atomic_duplicate_state)(struct drm_private_obj *obj);
222
223 /**
224 * @atomic_destroy_state:
225 *
226 * Frees the private object state created with @atomic_duplicate_state.
227 */
228 void (*atomic_destroy_state)(struct drm_private_obj *obj,
229 struct drm_private_state *state);
230
231 /**
232 * @atomic_print_state:
233 *
234 * If driver subclasses &struct drm_private_state, it should implement
235 * this optional hook for printing additional driver specific state.
236 *
237 * Do not call this directly, use drm_atomic_private_obj_print_state()
238 * instead.
239 */
240 void (*atomic_print_state)(struct drm_printer *p,
241 const struct drm_private_state *state);
242};
243
244/**
245 * struct drm_private_obj - base struct for driver private atomic object
246 *
247 * A driver private object is initialized by calling
248 * drm_atomic_private_obj_init() and cleaned up by calling
249 * drm_atomic_private_obj_fini().
250 *
251 * Currently only tracks the state update functions and the opaque driver
252 * private state itself, but in the future might also track which
253 * &drm_modeset_lock is required to duplicate and update this object's state.
254 *
255 * All private objects must be initialized before the DRM device they are
256 * attached to is registered to the DRM subsystem (call to drm_dev_register())
257 * and should stay around until this DRM device is unregistered (call to
258 * drm_dev_unregister()). In other words, private objects lifetime is tied
259 * to the DRM device lifetime. This implies that:
260 *
261 * 1/ all calls to drm_atomic_private_obj_init() must be done before calling
262 * drm_dev_register()
263 * 2/ all calls to drm_atomic_private_obj_fini() must be done after calling
264 * drm_dev_unregister()
265 *
266 * If that private object is used to store a state shared by multiple
267 * CRTCs, proper care must be taken to ensure that non-blocking commits are
268 * properly ordered to avoid a use-after-free issue.
269 *
270 * Indeed, assuming a sequence of two non-blocking &drm_atomic_commit on two
271 * different &drm_crtc using different &drm_plane and &drm_connector, so with no
272 * resources shared, there's no guarantee on which commit is going to happen
273 * first. However, the second &drm_atomic_commit will consider the first
274 * &drm_private_obj its old state, and will be in charge of freeing it whenever
275 * the second &drm_atomic_commit is done.
276 *
277 * If the first &drm_atomic_commit happens after it, it will consider its
278 * &drm_private_obj the new state and will be likely to access it, resulting in
279 * an access to a freed memory region. Drivers should store (and get a reference
280 * to) the &drm_crtc_commit structure in our private state in
281 * &drm_mode_config_helper_funcs.atomic_commit_setup, and then wait for that
282 * commit to complete as the first step of
283 * &drm_mode_config_helper_funcs.atomic_commit_tail, similar to
284 * drm_atomic_helper_wait_for_dependencies().
285 */
286struct drm_private_obj {
287 /**
288 * @head: List entry used to attach a private object to a &drm_device
289 * (queued to &drm_mode_config.privobj_list).
290 */
291 struct list_head head;
292
293 /**
294 * @lock: Modeset lock to protect the state object.
295 */
296 struct drm_modeset_lock lock;
297
298 /**
299 * @state: Current atomic state for this driver private object.
300 */
301 struct drm_private_state *state;
302
303 /**
304 * @funcs:
305 *
306 * Functions to manipulate the state of this driver private object, see
307 * &drm_private_state_funcs.
308 */
309 const struct drm_private_state_funcs *funcs;
310};
311
312/**
313 * drm_for_each_privobj() - private object iterator
314 *
315 * @privobj: pointer to the current private object. Updated after each
316 * iteration
317 * @dev: the DRM device we want get private objects from
318 *
319 * Allows one to iterate over all private objects attached to @dev
320 */
321#define drm_for_each_privobj(privobj, dev) \
322 list_for_each_entry(privobj, &(dev)->mode_config.privobj_list, head)
323
324/**
325 * struct drm_private_state - base struct for driver private object state
326 *
327 * Currently only contains a backpointer to the overall atomic update,
328 * and the relevant private object but in the future also might hold
329 * synchronization information similar to e.g. &drm_crtc.commit.
330 */
331struct drm_private_state {
332 /**
333 * @state: backpointer to global drm_atomic_state
334 */
335 struct drm_atomic_state *state;
336
337 /**
338 * @obj: backpointer to the private object
339 */
340 struct drm_private_obj *obj;
341};
342
343struct __drm_private_objs_state {
344 struct drm_private_obj *ptr;
345 struct drm_private_state *state, *old_state, *new_state;
346};
347
348/**
349 * struct drm_atomic_state - the global state object for atomic updates
350 * @ref: count of all references to this state (will not be freed until zero)
351 * @dev: parent DRM device
352 * @async_update: hint for asynchronous plane update
353 * @planes: pointer to array of structures with per-plane data
354 * @crtcs: pointer to array of CRTC pointers
355 * @num_connector: size of the @connectors and @connector_states arrays
356 * @connectors: pointer to array of structures with per-connector data
357 * @num_private_objs: size of the @private_objs array
358 * @private_objs: pointer to array of private object pointers
359 * @acquire_ctx: acquire context for this atomic modeset state update
360 *
361 * States are added to an atomic update by calling drm_atomic_get_crtc_state(),
362 * drm_atomic_get_plane_state(), drm_atomic_get_connector_state(), or for
363 * private state structures, drm_atomic_get_private_obj_state().
364 */
365struct drm_atomic_state {
366 struct kref ref;
367
368 struct drm_device *dev;
369
370 /**
371 * @allow_modeset:
372 *
373 * Allow full modeset. This is used by the ATOMIC IOCTL handler to
374 * implement the DRM_MODE_ATOMIC_ALLOW_MODESET flag. Drivers should
375 * never consult this flag, instead looking at the output of
376 * drm_atomic_crtc_needs_modeset().
377 */
378 bool allow_modeset : 1;
379 /**
380 * @legacy_cursor_update:
381 *
382 * Hint to enforce legacy cursor IOCTL semantics.
383 *
384 * WARNING: This is thoroughly broken and pretty much impossible to
385 * implement correctly. Drivers must ignore this and should instead
386 * implement &drm_plane_helper_funcs.atomic_async_check and
387 * &drm_plane_helper_funcs.atomic_async_commit hooks. New users of this
388 * flag are not allowed.
389 */
390 bool legacy_cursor_update : 1;
391 bool async_update : 1;
392 /**
393 * @duplicated:
394 *
395 * Indicates whether or not this atomic state was duplicated using
396 * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers
397 * should use this to fixup normal inconsistencies in duplicated
398 * states.
399 */
400 bool duplicated : 1;
401 struct __drm_planes_state *planes;
402 struct __drm_crtcs_state *crtcs;
403 int num_connector;
404 struct __drm_connnectors_state *connectors;
405 int num_private_objs;
406 struct __drm_private_objs_state *private_objs;
407
408 struct drm_modeset_acquire_ctx *acquire_ctx;
409
410 /**
411 * @fake_commit:
412 *
413 * Used for signaling unbound planes/connectors.
414 * When a connector or plane is not bound to any CRTC, it's still important
415 * to preserve linearity to prevent the atomic states from being freed to early.
416 *
417 * This commit (if set) is not bound to any CRTC, but will be completed when
418 * drm_atomic_helper_commit_hw_done() is called.
419 */
420 struct drm_crtc_commit *fake_commit;
421
422 /**
423 * @commit_work:
424 *
425 * Work item which can be used by the driver or helpers to execute the
426 * commit without blocking.
427 */
428 struct work_struct commit_work;
429};
430
431void __drm_crtc_commit_free(struct kref *kref);
432
433/**
434 * drm_crtc_commit_get - acquire a reference to the CRTC commit
435 * @commit: CRTC commit
436 *
437 * Increases the reference of @commit.
438 *
439 * Returns:
440 * The pointer to @commit, with reference increased.
441 */
442static inline struct drm_crtc_commit *drm_crtc_commit_get(struct drm_crtc_commit *commit)
443{
444 kref_get(&commit->ref);
445 return commit;
446}
447
448/**
449 * drm_crtc_commit_put - release a reference to the CRTC commmit
450 * @commit: CRTC commit
451 *
452 * This releases a reference to @commit which is freed after removing the
453 * final reference. No locking required and callable from any context.
454 */
455static inline void drm_crtc_commit_put(struct drm_crtc_commit *commit)
456{
457 kref_put(&commit->ref, __drm_crtc_commit_free);
458}
459
460int drm_crtc_commit_wait(struct drm_crtc_commit *commit);
461
462struct drm_atomic_state * __must_check
463drm_atomic_state_alloc(struct drm_device *dev);
464void drm_atomic_state_clear(struct drm_atomic_state *state);
465
466/**
467 * drm_atomic_state_get - acquire a reference to the atomic state
468 * @state: The atomic state
469 *
470 * Returns a new reference to the @state
471 */
472static inline struct drm_atomic_state *
473drm_atomic_state_get(struct drm_atomic_state *state)
474{
475 kref_get(&state->ref);
476 return state;
477}
478
479void __drm_atomic_state_free(struct kref *ref);
480
481/**
482 * drm_atomic_state_put - release a reference to the atomic state
483 * @state: The atomic state
484 *
485 * This releases a reference to @state which is freed after removing the
486 * final reference. No locking required and callable from any context.
487 */
488static inline void drm_atomic_state_put(struct drm_atomic_state *state)
489{
490 kref_put(&state->ref, __drm_atomic_state_free);
491}
492
493int __must_check
494drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state);
495void drm_atomic_state_default_clear(struct drm_atomic_state *state);
496void drm_atomic_state_default_release(struct drm_atomic_state *state);
497
498struct drm_crtc_state * __must_check
499drm_atomic_get_crtc_state(struct drm_atomic_state *state,
500 struct drm_crtc *crtc);
501struct drm_plane_state * __must_check
502drm_atomic_get_plane_state(struct drm_atomic_state *state,
503 struct drm_plane *plane);
504struct drm_connector_state * __must_check
505drm_atomic_get_connector_state(struct drm_atomic_state *state,
506 struct drm_connector *connector);
507
508void drm_atomic_private_obj_init(struct drm_device *dev,
509 struct drm_private_obj *obj,
510 struct drm_private_state *state,
511 const struct drm_private_state_funcs *funcs);
512void drm_atomic_private_obj_fini(struct drm_private_obj *obj);
513
514struct drm_private_state * __must_check
515drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
516 struct drm_private_obj *obj);
517struct drm_private_state *
518drm_atomic_get_old_private_obj_state(struct drm_atomic_state *state,
519 struct drm_private_obj *obj);
520struct drm_private_state *
521drm_atomic_get_new_private_obj_state(struct drm_atomic_state *state,
522 struct drm_private_obj *obj);
523
524struct drm_connector *
525drm_atomic_get_old_connector_for_encoder(struct drm_atomic_state *state,
526 struct drm_encoder *encoder);
527struct drm_connector *
528drm_atomic_get_new_connector_for_encoder(struct drm_atomic_state *state,
529 struct drm_encoder *encoder);
530
531/**
532 * drm_atomic_get_existing_crtc_state - get CRTC state, if it exists
533 * @state: global atomic state object
534 * @crtc: CRTC to grab
535 *
536 * This function returns the CRTC state for the given CRTC, or NULL
537 * if the CRTC is not part of the global atomic state.
538 *
539 * This function is deprecated, @drm_atomic_get_old_crtc_state or
540 * @drm_atomic_get_new_crtc_state should be used instead.
541 */
542static inline struct drm_crtc_state *
543drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state,
544 struct drm_crtc *crtc)
545{
546 return state->crtcs[drm_crtc_index(crtc)].state;
547}
548
549/**
550 * drm_atomic_get_old_crtc_state - get old CRTC state, if it exists
551 * @state: global atomic state object
552 * @crtc: CRTC to grab
553 *
554 * This function returns the old CRTC state for the given CRTC, or
555 * NULL if the CRTC is not part of the global atomic state.
556 */
557static inline struct drm_crtc_state *
558drm_atomic_get_old_crtc_state(struct drm_atomic_state *state,
559 struct drm_crtc *crtc)
560{
561 return state->crtcs[drm_crtc_index(crtc)].old_state;
562}
563/**
564 * drm_atomic_get_new_crtc_state - get new CRTC state, if it exists
565 * @state: global atomic state object
566 * @crtc: CRTC to grab
567 *
568 * This function returns the new CRTC state for the given CRTC, or
569 * NULL if the CRTC is not part of the global atomic state.
570 */
571static inline struct drm_crtc_state *
572drm_atomic_get_new_crtc_state(struct drm_atomic_state *state,
573 struct drm_crtc *crtc)
574{
575 return state->crtcs[drm_crtc_index(crtc)].new_state;
576}
577
578/**
579 * drm_atomic_get_existing_plane_state - get plane state, if it exists
580 * @state: global atomic state object
581 * @plane: plane to grab
582 *
583 * This function returns the plane state for the given plane, or NULL
584 * if the plane is not part of the global atomic state.
585 *
586 * This function is deprecated, @drm_atomic_get_old_plane_state or
587 * @drm_atomic_get_new_plane_state should be used instead.
588 */
589static inline struct drm_plane_state *
590drm_atomic_get_existing_plane_state(struct drm_atomic_state *state,
591 struct drm_plane *plane)
592{
593 return state->planes[drm_plane_index(plane)].state;
594}
595
596/**
597 * drm_atomic_get_old_plane_state - get plane state, if it exists
598 * @state: global atomic state object
599 * @plane: plane to grab
600 *
601 * This function returns the old plane state for the given plane, or
602 * NULL if the plane is not part of the global atomic state.
603 */
604static inline struct drm_plane_state *
605drm_atomic_get_old_plane_state(struct drm_atomic_state *state,
606 struct drm_plane *plane)
607{
608 return state->planes[drm_plane_index(plane)].old_state;
609}
610
611/**
612 * drm_atomic_get_new_plane_state - get plane state, if it exists
613 * @state: global atomic state object
614 * @plane: plane to grab
615 *
616 * This function returns the new plane state for the given plane, or
617 * NULL if the plane is not part of the global atomic state.
618 */
619static inline struct drm_plane_state *
620drm_atomic_get_new_plane_state(struct drm_atomic_state *state,
621 struct drm_plane *plane)
622{
623 return state->planes[drm_plane_index(plane)].new_state;
624}
625
626/**
627 * drm_atomic_get_existing_connector_state - get connector state, if it exists
628 * @state: global atomic state object
629 * @connector: connector to grab
630 *
631 * This function returns the connector state for the given connector,
632 * or NULL if the connector is not part of the global atomic state.
633 *
634 * This function is deprecated, @drm_atomic_get_old_connector_state or
635 * @drm_atomic_get_new_connector_state should be used instead.
636 */
637static inline struct drm_connector_state *
638drm_atomic_get_existing_connector_state(struct drm_atomic_state *state,
639 struct drm_connector *connector)
640{
641 int index = drm_connector_index(connector);
642
643 if (index >= state->num_connector)
644 return NULL;
645
646 return state->connectors[index].state;
647}
648
649/**
650 * drm_atomic_get_old_connector_state - get connector state, if it exists
651 * @state: global atomic state object
652 * @connector: connector to grab
653 *
654 * This function returns the old connector state for the given connector,
655 * or NULL if the connector is not part of the global atomic state.
656 */
657static inline struct drm_connector_state *
658drm_atomic_get_old_connector_state(struct drm_atomic_state *state,
659 struct drm_connector *connector)
660{
661 int index = drm_connector_index(connector);
662
663 if (index >= state->num_connector)
664 return NULL;
665
666 return state->connectors[index].old_state;
667}
668
669/**
670 * drm_atomic_get_new_connector_state - get connector state, if it exists
671 * @state: global atomic state object
672 * @connector: connector to grab
673 *
674 * This function returns the new connector state for the given connector,
675 * or NULL if the connector is not part of the global atomic state.
676 */
677static inline struct drm_connector_state *
678drm_atomic_get_new_connector_state(struct drm_atomic_state *state,
679 struct drm_connector *connector)
680{
681 int index = drm_connector_index(connector);
682
683 if (index >= state->num_connector)
684 return NULL;
685
686 return state->connectors[index].new_state;
687}
688
689/**
690 * __drm_atomic_get_current_plane_state - get current plane state
691 * @state: global atomic state object
692 * @plane: plane to grab
693 *
694 * This function returns the plane state for the given plane, either from
695 * @state, or if the plane isn't part of the atomic state update, from @plane.
696 * This is useful in atomic check callbacks, when drivers need to peek at, but
697 * not change, state of other planes, since it avoids threading an error code
698 * back up the call chain.
699 *
700 * WARNING:
701 *
702 * Note that this function is in general unsafe since it doesn't check for the
703 * required locking for access state structures. Drivers must ensure that it is
704 * safe to access the returned state structure through other means. One common
705 * example is when planes are fixed to a single CRTC, and the driver knows that
706 * the CRTC lock is held already. In that case holding the CRTC lock gives a
707 * read-lock on all planes connected to that CRTC. But if planes can be
708 * reassigned things get more tricky. In that case it's better to use
709 * drm_atomic_get_plane_state and wire up full error handling.
710 *
711 * Returns:
712 *
713 * Read-only pointer to the current plane state.
714 */
715static inline const struct drm_plane_state *
716__drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
717 struct drm_plane *plane)
718{
719 if (state->planes[drm_plane_index(plane)].state)
720 return state->planes[drm_plane_index(plane)].state;
721
722 return plane->state;
723}
724
725int __must_check
726drm_atomic_add_encoder_bridges(struct drm_atomic_state *state,
727 struct drm_encoder *encoder);
728int __must_check
729drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
730 struct drm_crtc *crtc);
731int __must_check
732drm_atomic_add_affected_planes(struct drm_atomic_state *state,
733 struct drm_crtc *crtc);
734
735int __must_check drm_atomic_check_only(struct drm_atomic_state *state);
736int __must_check drm_atomic_commit(struct drm_atomic_state *state);
737int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state);
738
739void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
740
741/**
742 * for_each_oldnew_connector_in_state - iterate over all connectors in an atomic update
743 * @__state: &struct drm_atomic_state pointer
744 * @connector: &struct drm_connector iteration cursor
745 * @old_connector_state: &struct drm_connector_state iteration cursor for the
746 * old state
747 * @new_connector_state: &struct drm_connector_state iteration cursor for the
748 * new state
749 * @__i: int iteration cursor, for macro-internal use
750 *
751 * This iterates over all connectors in an atomic update, tracking both old and
752 * new state. This is useful in places where the state delta needs to be
753 * considered, for example in atomic check functions.
754 */
755#define for_each_oldnew_connector_in_state(__state, connector, old_connector_state, new_connector_state, __i) \
756 for ((__i) = 0; \
757 (__i) < (__state)->num_connector; \
758 (__i)++) \
759 for_each_if ((__state)->connectors[__i].ptr && \
760 ((connector) = (__state)->connectors[__i].ptr, \
761 (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
762 (old_connector_state) = (__state)->connectors[__i].old_state, \
763 (new_connector_state) = (__state)->connectors[__i].new_state, 1))
764
765/**
766 * for_each_old_connector_in_state - iterate over all connectors in an atomic update
767 * @__state: &struct drm_atomic_state pointer
768 * @connector: &struct drm_connector iteration cursor
769 * @old_connector_state: &struct drm_connector_state iteration cursor for the
770 * old state
771 * @__i: int iteration cursor, for macro-internal use
772 *
773 * This iterates over all connectors in an atomic update, tracking only the old
774 * state. This is useful in disable functions, where we need the old state the
775 * hardware is still in.
776 */
777#define for_each_old_connector_in_state(__state, connector, old_connector_state, __i) \
778 for ((__i) = 0; \
779 (__i) < (__state)->num_connector; \
780 (__i)++) \
781 for_each_if ((__state)->connectors[__i].ptr && \
782 ((connector) = (__state)->connectors[__i].ptr, \
783 (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
784 (old_connector_state) = (__state)->connectors[__i].old_state, 1))
785
786/**
787 * for_each_new_connector_in_state - iterate over all connectors in an atomic update
788 * @__state: &struct drm_atomic_state pointer
789 * @connector: &struct drm_connector iteration cursor
790 * @new_connector_state: &struct drm_connector_state iteration cursor for the
791 * new state
792 * @__i: int iteration cursor, for macro-internal use
793 *
794 * This iterates over all connectors in an atomic update, tracking only the new
795 * state. This is useful in enable functions, where we need the new state the
796 * hardware should be in when the atomic commit operation has completed.
797 */
798#define for_each_new_connector_in_state(__state, connector, new_connector_state, __i) \
799 for ((__i) = 0; \
800 (__i) < (__state)->num_connector; \
801 (__i)++) \
802 for_each_if ((__state)->connectors[__i].ptr && \
803 ((connector) = (__state)->connectors[__i].ptr, \
804 (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
805 (new_connector_state) = (__state)->connectors[__i].new_state, \
806 (void)(new_connector_state) /* Only to avoid unused-but-set-variable warning */, 1))
807
808/**
809 * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
810 * @__state: &struct drm_atomic_state pointer
811 * @crtc: &struct drm_crtc iteration cursor
812 * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state
813 * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state
814 * @__i: int iteration cursor, for macro-internal use
815 *
816 * This iterates over all CRTCs in an atomic update, tracking both old and
817 * new state. This is useful in places where the state delta needs to be
818 * considered, for example in atomic check functions.
819 */
820#define for_each_oldnew_crtc_in_state(__state, crtc, old_crtc_state, new_crtc_state, __i) \
821 for ((__i) = 0; \
822 (__i) < (__state)->dev->mode_config.num_crtc; \
823 (__i)++) \
824 for_each_if ((__state)->crtcs[__i].ptr && \
825 ((crtc) = (__state)->crtcs[__i].ptr, \
826 (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
827 (old_crtc_state) = (__state)->crtcs[__i].old_state, \
828 (void)(old_crtc_state) /* Only to avoid unused-but-set-variable warning */, \
829 (new_crtc_state) = (__state)->crtcs[__i].new_state, \
830 (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
831
832/**
833 * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update
834 * @__state: &struct drm_atomic_state pointer
835 * @crtc: &struct drm_crtc iteration cursor
836 * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state
837 * @__i: int iteration cursor, for macro-internal use
838 *
839 * This iterates over all CRTCs in an atomic update, tracking only the old
840 * state. This is useful in disable functions, where we need the old state the
841 * hardware is still in.
842 */
843#define for_each_old_crtc_in_state(__state, crtc, old_crtc_state, __i) \
844 for ((__i) = 0; \
845 (__i) < (__state)->dev->mode_config.num_crtc; \
846 (__i)++) \
847 for_each_if ((__state)->crtcs[__i].ptr && \
848 ((crtc) = (__state)->crtcs[__i].ptr, \
849 (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
850 (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))
851
852/**
853 * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update
854 * @__state: &struct drm_atomic_state pointer
855 * @crtc: &struct drm_crtc iteration cursor
856 * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state
857 * @__i: int iteration cursor, for macro-internal use
858 *
859 * This iterates over all CRTCs in an atomic update, tracking only the new
860 * state. This is useful in enable functions, where we need the new state the
861 * hardware should be in when the atomic commit operation has completed.
862 */
863#define for_each_new_crtc_in_state(__state, crtc, new_crtc_state, __i) \
864 for ((__i) = 0; \
865 (__i) < (__state)->dev->mode_config.num_crtc; \
866 (__i)++) \
867 for_each_if ((__state)->crtcs[__i].ptr && \
868 ((crtc) = (__state)->crtcs[__i].ptr, \
869 (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
870 (new_crtc_state) = (__state)->crtcs[__i].new_state, \
871 (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
872
873/**
874 * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
875 * @__state: &struct drm_atomic_state pointer
876 * @plane: &struct drm_plane iteration cursor
877 * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
878 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
879 * @__i: int iteration cursor, for macro-internal use
880 *
881 * This iterates over all planes in an atomic update, tracking both old and
882 * new state. This is useful in places where the state delta needs to be
883 * considered, for example in atomic check functions.
884 */
885#define for_each_oldnew_plane_in_state(__state, plane, old_plane_state, new_plane_state, __i) \
886 for ((__i) = 0; \
887 (__i) < (__state)->dev->mode_config.num_total_plane; \
888 (__i)++) \
889 for_each_if ((__state)->planes[__i].ptr && \
890 ((plane) = (__state)->planes[__i].ptr, \
891 (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
892 (old_plane_state) = (__state)->planes[__i].old_state,\
893 (new_plane_state) = (__state)->planes[__i].new_state, 1))
894
895/**
896 * for_each_oldnew_plane_in_state_reverse - iterate over all planes in an atomic
897 * update in reverse order
898 * @__state: &struct drm_atomic_state pointer
899 * @plane: &struct drm_plane iteration cursor
900 * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
901 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
902 * @__i: int iteration cursor, for macro-internal use
903 *
904 * This iterates over all planes in an atomic update in reverse order,
905 * tracking both old and new state. This is useful in places where the
906 * state delta needs to be considered, for example in atomic check functions.
907 */
908#define for_each_oldnew_plane_in_state_reverse(__state, plane, old_plane_state, new_plane_state, __i) \
909 for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1); \
910 (__i) >= 0; \
911 (__i)--) \
912 for_each_if ((__state)->planes[__i].ptr && \
913 ((plane) = (__state)->planes[__i].ptr, \
914 (old_plane_state) = (__state)->planes[__i].old_state,\
915 (new_plane_state) = (__state)->planes[__i].new_state, 1))
916
917/**
918 * for_each_new_plane_in_state_reverse - other than only tracking new state,
919 * it's the same as for_each_oldnew_plane_in_state_reverse
920 * @__state: &struct drm_atomic_state pointer
921 * @plane: &struct drm_plane iteration cursor
922 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
923 * @__i: int iteration cursor, for macro-internal use
924 */
925#define for_each_new_plane_in_state_reverse(__state, plane, new_plane_state, __i) \
926 for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1); \
927 (__i) >= 0; \
928 (__i)--) \
929 for_each_if ((__state)->planes[__i].ptr && \
930 ((plane) = (__state)->planes[__i].ptr, \
931 (new_plane_state) = (__state)->planes[__i].new_state, 1))
932
933/**
934 * for_each_old_plane_in_state - iterate over all planes in an atomic update
935 * @__state: &struct drm_atomic_state pointer
936 * @plane: &struct drm_plane iteration cursor
937 * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
938 * @__i: int iteration cursor, for macro-internal use
939 *
940 * This iterates over all planes in an atomic update, tracking only the old
941 * state. This is useful in disable functions, where we need the old state the
942 * hardware is still in.
943 */
944#define for_each_old_plane_in_state(__state, plane, old_plane_state, __i) \
945 for ((__i) = 0; \
946 (__i) < (__state)->dev->mode_config.num_total_plane; \
947 (__i)++) \
948 for_each_if ((__state)->planes[__i].ptr && \
949 ((plane) = (__state)->planes[__i].ptr, \
950 (old_plane_state) = (__state)->planes[__i].old_state, 1))
951/**
952 * for_each_new_plane_in_state - iterate over all planes in an atomic update
953 * @__state: &struct drm_atomic_state pointer
954 * @plane: &struct drm_plane iteration cursor
955 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
956 * @__i: int iteration cursor, for macro-internal use
957 *
958 * This iterates over all planes in an atomic update, tracking only the new
959 * state. This is useful in enable functions, where we need the new state the
960 * hardware should be in when the atomic commit operation has completed.
961 */
962#define for_each_new_plane_in_state(__state, plane, new_plane_state, __i) \
963 for ((__i) = 0; \
964 (__i) < (__state)->dev->mode_config.num_total_plane; \
965 (__i)++) \
966 for_each_if ((__state)->planes[__i].ptr && \
967 ((plane) = (__state)->planes[__i].ptr, \
968 (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
969 (new_plane_state) = (__state)->planes[__i].new_state, \
970 (void)(new_plane_state) /* Only to avoid unused-but-set-variable warning */, 1))
971
972/**
973 * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
974 * @__state: &struct drm_atomic_state pointer
975 * @obj: &struct drm_private_obj iteration cursor
976 * @old_obj_state: &struct drm_private_state iteration cursor for the old state
977 * @new_obj_state: &struct drm_private_state iteration cursor for the new state
978 * @__i: int iteration cursor, for macro-internal use
979 *
980 * This iterates over all private objects in an atomic update, tracking both
981 * old and new state. This is useful in places where the state delta needs
982 * to be considered, for example in atomic check functions.
983 */
984#define for_each_oldnew_private_obj_in_state(__state, obj, old_obj_state, new_obj_state, __i) \
985 for ((__i) = 0; \
986 (__i) < (__state)->num_private_objs && \
987 ((obj) = (__state)->private_objs[__i].ptr, \
988 (old_obj_state) = (__state)->private_objs[__i].old_state, \
989 (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
990 (__i)++)
991
992/**
993 * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update
994 * @__state: &struct drm_atomic_state pointer
995 * @obj: &struct drm_private_obj iteration cursor
996 * @old_obj_state: &struct drm_private_state iteration cursor for the old state
997 * @__i: int iteration cursor, for macro-internal use
998 *
999 * This iterates over all private objects in an atomic update, tracking only
1000 * the old state. This is useful in disable functions, where we need the old
1001 * state the hardware is still in.
1002 */
1003#define for_each_old_private_obj_in_state(__state, obj, old_obj_state, __i) \
1004 for ((__i) = 0; \
1005 (__i) < (__state)->num_private_objs && \
1006 ((obj) = (__state)->private_objs[__i].ptr, \
1007 (old_obj_state) = (__state)->private_objs[__i].old_state, 1); \
1008 (__i)++)
1009
1010/**
1011 * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update
1012 * @__state: &struct drm_atomic_state pointer
1013 * @obj: &struct drm_private_obj iteration cursor
1014 * @new_obj_state: &struct drm_private_state iteration cursor for the new state
1015 * @__i: int iteration cursor, for macro-internal use
1016 *
1017 * This iterates over all private objects in an atomic update, tracking only
1018 * the new state. This is useful in enable functions, where we need the new state the
1019 * hardware should be in when the atomic commit operation has completed.
1020 */
1021#define for_each_new_private_obj_in_state(__state, obj, new_obj_state, __i) \
1022 for ((__i) = 0; \
1023 (__i) < (__state)->num_private_objs && \
1024 ((obj) = (__state)->private_objs[__i].ptr, \
1025 (void)(obj) /* Only to avoid unused-but-set-variable warning */, \
1026 (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
1027 (__i)++)
1028
1029/**
1030 * drm_atomic_crtc_needs_modeset - compute combined modeset need
1031 * @state: &drm_crtc_state for the CRTC
1032 *
1033 * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track
1034 * whether the state CRTC changed enough to need a full modeset cycle:
1035 * mode_changed, active_changed and connectors_changed. This helper simply
1036 * combines these three to compute the overall need for a modeset for @state.
1037 *
1038 * The atomic helper code sets these booleans, but drivers can and should
1039 * change them appropriately to accurately represent whether a modeset is
1040 * really needed. In general, drivers should avoid full modesets whenever
1041 * possible.
1042 *
1043 * For example if the CRTC mode has changed, and the hardware is able to enact
1044 * the requested mode change without going through a full modeset, the driver
1045 * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
1046 * implementation.
1047 */
1048static inline bool
1049drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
1050{
1051 return state->mode_changed || state->active_changed ||
1052 state->connectors_changed;
1053}
1054
1055/**
1056 * drm_atomic_crtc_effectively_active - compute whether CRTC is actually active
1057 * @state: &drm_crtc_state for the CRTC
1058 *
1059 * When in self refresh mode, the crtc_state->active value will be false, since
1060 * the CRTC is off. However in some cases we're interested in whether the CRTC
1061 * is active, or effectively active (ie: it's connected to an active display).
1062 * In these cases, use this function instead of just checking active.
1063 */
1064static inline bool
1065drm_atomic_crtc_effectively_active(const struct drm_crtc_state *state)
1066{
1067 return state->active || state->self_refresh_active;
1068}
1069
1070/**
1071 * struct drm_bus_cfg - bus configuration
1072 *
1073 * This structure stores the configuration of a physical bus between two
1074 * components in an output pipeline, usually between two bridges, an encoder
1075 * and a bridge, or a bridge and a connector.
1076 *
1077 * The bus configuration is stored in &drm_bridge_state separately for the
1078 * input and output buses, as seen from the point of view of each bridge. The
1079 * bus configuration of a bridge output is usually identical to the
1080 * configuration of the next bridge's input, but may differ if the signals are
1081 * modified between the two bridges, for instance by an inverter on the board.
1082 * The input and output configurations of a bridge may differ if the bridge
1083 * modifies the signals internally, for instance by performing format
1084 * conversion, or modifying signals polarities.
1085 */
1086struct drm_bus_cfg {
1087 /**
1088 * @format: format used on this bus (one of the MEDIA_BUS_FMT_* format)
1089 *
1090 * This field should not be directly modified by drivers
1091 * (drm_atomic_bridge_chain_select_bus_fmts() takes care of the bus
1092 * format negotiation).
1093 */
1094 u32 format;
1095
1096 /**
1097 * @flags: DRM_BUS_* flags used on this bus
1098 */
1099 u32 flags;
1100};
1101
1102/**
1103 * struct drm_bridge_state - Atomic bridge state object
1104 */
1105struct drm_bridge_state {
1106 /**
1107 * @base: inherit from &drm_private_state
1108 */
1109 struct drm_private_state base;
1110
1111 /**
1112 * @bridge: the bridge this state refers to
1113 */
1114 struct drm_bridge *bridge;
1115
1116 /**
1117 * @input_bus_cfg: input bus configuration
1118 */
1119 struct drm_bus_cfg input_bus_cfg;
1120
1121 /**
1122 * @output_bus_cfg: input bus configuration
1123 */
1124 struct drm_bus_cfg output_bus_cfg;
1125};
1126
1127static inline struct drm_bridge_state *
1128drm_priv_to_bridge_state(struct drm_private_state *priv)
1129{
1130 return container_of(priv, struct drm_bridge_state, base);
1131}
1132
1133struct drm_bridge_state *
1134drm_atomic_get_bridge_state(struct drm_atomic_state *state,
1135 struct drm_bridge *bridge);
1136struct drm_bridge_state *
1137drm_atomic_get_old_bridge_state(struct drm_atomic_state *state,
1138 struct drm_bridge *bridge);
1139struct drm_bridge_state *
1140drm_atomic_get_new_bridge_state(struct drm_atomic_state *state,
1141 struct drm_bridge *bridge);
1142
1143#endif /* DRM_ATOMIC_H_ */
1/*
2 * Copyright (C) 2014 Red Hat
3 * Copyright (C) 2014 Intel Corp.
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining a
6 * copy of this software and associated documentation files (the "Software"),
7 * to deal in the Software without restriction, including without limitation
8 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
9 * and/or sell copies of the Software, and to permit persons to whom the
10 * Software is furnished to do so, subject to the following conditions:
11 *
12 * The above copyright notice and this permission notice shall be included in
13 * all copies or substantial portions of the Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
19 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
20 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
21 * OTHER DEALINGS IN THE SOFTWARE.
22 *
23 * Authors:
24 * Rob Clark <robdclark@gmail.com>
25 * Daniel Vetter <daniel.vetter@ffwll.ch>
26 */
27
28#ifndef DRM_ATOMIC_H_
29#define DRM_ATOMIC_H_
30
31#include <drm/drm_crtc.h>
32#include <drm/drm_util.h>
33
34/**
35 * struct drm_crtc_commit - track modeset commits on a CRTC
36 *
37 * This structure is used to track pending modeset changes and atomic commit on
38 * a per-CRTC basis. Since updating the list should never block, this structure
39 * is reference counted to allow waiters to safely wait on an event to complete,
40 * without holding any locks.
41 *
42 * It has 3 different events in total to allow a fine-grained synchronization
43 * between outstanding updates::
44 *
45 * atomic commit thread hardware
46 *
47 * write new state into hardware ----> ...
48 * signal hw_done
49 * switch to new state on next
50 * ... v/hblank
51 *
52 * wait for buffers to show up ...
53 *
54 * ... send completion irq
55 * irq handler signals flip_done
56 * cleanup old buffers
57 *
58 * signal cleanup_done
59 *
60 * wait for flip_done <----
61 * clean up atomic state
62 *
63 * The important bit to know is that &cleanup_done is the terminal event, but the
64 * ordering between &flip_done and &hw_done is entirely up to the specific driver
65 * and modeset state change.
66 *
67 * For an implementation of how to use this look at
68 * drm_atomic_helper_setup_commit() from the atomic helper library.
69 *
70 * See also drm_crtc_commit_wait().
71 */
72struct drm_crtc_commit {
73 /**
74 * @crtc:
75 *
76 * DRM CRTC for this commit.
77 */
78 struct drm_crtc *crtc;
79
80 /**
81 * @ref:
82 *
83 * Reference count for this structure. Needed to allow blocking on
84 * completions without the risk of the completion disappearing
85 * meanwhile.
86 */
87 struct kref ref;
88
89 /**
90 * @flip_done:
91 *
92 * Will be signaled when the hardware has flipped to the new set of
93 * buffers. Signals at the same time as when the drm event for this
94 * commit is sent to userspace, or when an out-fence is singalled. Note
95 * that for most hardware, in most cases this happens after @hw_done is
96 * signalled.
97 *
98 * Completion of this stage is signalled implicitly by calling
99 * drm_crtc_send_vblank_event() on &drm_crtc_state.event.
100 */
101 struct completion flip_done;
102
103 /**
104 * @hw_done:
105 *
106 * Will be signalled when all hw register changes for this commit have
107 * been written out. Especially when disabling a pipe this can be much
108 * later than @flip_done, since that can signal already when the
109 * screen goes black, whereas to fully shut down a pipe more register
110 * I/O is required.
111 *
112 * Note that this does not need to include separately reference-counted
113 * resources like backing storage buffer pinning, or runtime pm
114 * management.
115 *
116 * Drivers should call drm_atomic_helper_commit_hw_done() to signal
117 * completion of this stage.
118 */
119 struct completion hw_done;
120
121 /**
122 * @cleanup_done:
123 *
124 * Will be signalled after old buffers have been cleaned up by calling
125 * drm_atomic_helper_cleanup_planes(). Since this can only happen after
126 * a vblank wait completed it might be a bit later. This completion is
127 * useful to throttle updates and avoid hardware updates getting ahead
128 * of the buffer cleanup too much.
129 *
130 * Drivers should call drm_atomic_helper_commit_cleanup_done() to signal
131 * completion of this stage.
132 */
133 struct completion cleanup_done;
134
135 /**
136 * @commit_entry:
137 *
138 * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
139 * $drm_crtc.commit_lock.
140 */
141 struct list_head commit_entry;
142
143 /**
144 * @event:
145 *
146 * &drm_pending_vblank_event pointer to clean up private events.
147 */
148 struct drm_pending_vblank_event *event;
149
150 /**
151 * @abort_completion:
152 *
153 * A flag that's set after drm_atomic_helper_setup_commit() takes a
154 * second reference for the completion of $drm_crtc_state.event. It's
155 * used by the free code to remove the second reference if commit fails.
156 */
157 bool abort_completion;
158};
159
160struct __drm_planes_state {
161 struct drm_plane *ptr;
162 struct drm_plane_state *state, *old_state, *new_state;
163};
164
165struct __drm_crtcs_state {
166 struct drm_crtc *ptr;
167 struct drm_crtc_state *state, *old_state, *new_state;
168
169 /**
170 * @commit:
171 *
172 * A reference to the CRTC commit object that is kept for use by
173 * drm_atomic_helper_wait_for_flip_done() after
174 * drm_atomic_helper_commit_hw_done() is called. This ensures that a
175 * concurrent commit won't free a commit object that is still in use.
176 */
177 struct drm_crtc_commit *commit;
178
179 s32 __user *out_fence_ptr;
180 u64 last_vblank_count;
181};
182
183struct __drm_connnectors_state {
184 struct drm_connector *ptr;
185 struct drm_connector_state *state, *old_state, *new_state;
186 /**
187 * @out_fence_ptr:
188 *
189 * User-provided pointer which the kernel uses to return a sync_file
190 * file descriptor. Used by writeback connectors to signal completion of
191 * the writeback.
192 */
193 s32 __user *out_fence_ptr;
194};
195
196struct drm_private_obj;
197struct drm_private_state;
198
199/**
200 * struct drm_private_state_funcs - atomic state functions for private objects
201 *
202 * These hooks are used by atomic helpers to create, swap and destroy states of
203 * private objects. The structure itself is used as a vtable to identify the
204 * associated private object type. Each private object type that needs to be
205 * added to the atomic states is expected to have an implementation of these
206 * hooks and pass a pointer to its drm_private_state_funcs struct to
207 * drm_atomic_get_private_obj_state().
208 */
209struct drm_private_state_funcs {
210 /**
211 * @atomic_duplicate_state:
212 *
213 * Duplicate the current state of the private object and return it. It
214 * is an error to call this before obj->state has been initialized.
215 *
216 * RETURNS:
217 *
218 * Duplicated atomic state or NULL when obj->state is not
219 * initialized or allocation failed.
220 */
221 struct drm_private_state *(*atomic_duplicate_state)(struct drm_private_obj *obj);
222
223 /**
224 * @atomic_destroy_state:
225 *
226 * Frees the private object state created with @atomic_duplicate_state.
227 */
228 void (*atomic_destroy_state)(struct drm_private_obj *obj,
229 struct drm_private_state *state);
230};
231
232/**
233 * struct drm_private_obj - base struct for driver private atomic object
234 *
235 * A driver private object is initialized by calling
236 * drm_atomic_private_obj_init() and cleaned up by calling
237 * drm_atomic_private_obj_fini().
238 *
239 * Currently only tracks the state update functions and the opaque driver
240 * private state itself, but in the future might also track which
241 * &drm_modeset_lock is required to duplicate and update this object's state.
242 *
243 * All private objects must be initialized before the DRM device they are
244 * attached to is registered to the DRM subsystem (call to drm_dev_register())
245 * and should stay around until this DRM device is unregistered (call to
246 * drm_dev_unregister()). In other words, private objects lifetime is tied
247 * to the DRM device lifetime. This implies that:
248 *
249 * 1/ all calls to drm_atomic_private_obj_init() must be done before calling
250 * drm_dev_register()
251 * 2/ all calls to drm_atomic_private_obj_fini() must be done after calling
252 * drm_dev_unregister()
253 *
254 * If that private object is used to store a state shared by multiple
255 * CRTCs, proper care must be taken to ensure that non-blocking commits are
256 * properly ordered to avoid a use-after-free issue.
257 *
258 * Indeed, assuming a sequence of two non-blocking &drm_atomic_commit on two
259 * different &drm_crtc using different &drm_plane and &drm_connector, so with no
260 * resources shared, there's no guarantee on which commit is going to happen
261 * first. However, the second &drm_atomic_commit will consider the first
262 * &drm_private_obj its old state, and will be in charge of freeing it whenever
263 * the second &drm_atomic_commit is done.
264 *
265 * If the first &drm_atomic_commit happens after it, it will consider its
266 * &drm_private_obj the new state and will be likely to access it, resulting in
267 * an access to a freed memory region. Drivers should store (and get a reference
268 * to) the &drm_crtc_commit structure in our private state in
269 * &drm_mode_config_helper_funcs.atomic_commit_setup, and then wait for that
270 * commit to complete as the first step of
271 * &drm_mode_config_helper_funcs.atomic_commit_tail, similar to
272 * drm_atomic_helper_wait_for_dependencies().
273 */
274struct drm_private_obj {
275 /**
276 * @head: List entry used to attach a private object to a &drm_device
277 * (queued to &drm_mode_config.privobj_list).
278 */
279 struct list_head head;
280
281 /**
282 * @lock: Modeset lock to protect the state object.
283 */
284 struct drm_modeset_lock lock;
285
286 /**
287 * @state: Current atomic state for this driver private object.
288 */
289 struct drm_private_state *state;
290
291 /**
292 * @funcs:
293 *
294 * Functions to manipulate the state of this driver private object, see
295 * &drm_private_state_funcs.
296 */
297 const struct drm_private_state_funcs *funcs;
298};
299
300/**
301 * drm_for_each_privobj() - private object iterator
302 *
303 * @privobj: pointer to the current private object. Updated after each
304 * iteration
305 * @dev: the DRM device we want get private objects from
306 *
307 * Allows one to iterate over all private objects attached to @dev
308 */
309#define drm_for_each_privobj(privobj, dev) \
310 list_for_each_entry(privobj, &(dev)->mode_config.privobj_list, head)
311
312/**
313 * struct drm_private_state - base struct for driver private object state
314 * @state: backpointer to global drm_atomic_state
315 *
316 * Currently only contains a backpointer to the overall atomic update, but in
317 * the future also might hold synchronization information similar to e.g.
318 * &drm_crtc.commit.
319 */
320struct drm_private_state {
321 struct drm_atomic_state *state;
322};
323
324struct __drm_private_objs_state {
325 struct drm_private_obj *ptr;
326 struct drm_private_state *state, *old_state, *new_state;
327};
328
329/**
330 * struct drm_atomic_state - the global state object for atomic updates
331 * @ref: count of all references to this state (will not be freed until zero)
332 * @dev: parent DRM device
333 * @async_update: hint for asynchronous plane update
334 * @planes: pointer to array of structures with per-plane data
335 * @crtcs: pointer to array of CRTC pointers
336 * @num_connector: size of the @connectors and @connector_states arrays
337 * @connectors: pointer to array of structures with per-connector data
338 * @num_private_objs: size of the @private_objs array
339 * @private_objs: pointer to array of private object pointers
340 * @acquire_ctx: acquire context for this atomic modeset state update
341 *
342 * States are added to an atomic update by calling drm_atomic_get_crtc_state(),
343 * drm_atomic_get_plane_state(), drm_atomic_get_connector_state(), or for
344 * private state structures, drm_atomic_get_private_obj_state().
345 */
346struct drm_atomic_state {
347 struct kref ref;
348
349 struct drm_device *dev;
350
351 /**
352 * @allow_modeset:
353 *
354 * Allow full modeset. This is used by the ATOMIC IOCTL handler to
355 * implement the DRM_MODE_ATOMIC_ALLOW_MODESET flag. Drivers should
356 * never consult this flag, instead looking at the output of
357 * drm_atomic_crtc_needs_modeset().
358 */
359 bool allow_modeset : 1;
360 /**
361 * @legacy_cursor_update:
362 *
363 * Hint to enforce legacy cursor IOCTL semantics.
364 *
365 * WARNING: This is thoroughly broken and pretty much impossible to
366 * implement correctly. Drivers must ignore this and should instead
367 * implement &drm_plane_helper_funcs.atomic_async_check and
368 * &drm_plane_helper_funcs.atomic_async_commit hooks. New users of this
369 * flag are not allowed.
370 */
371 bool legacy_cursor_update : 1;
372 bool async_update : 1;
373 /**
374 * @duplicated:
375 *
376 * Indicates whether or not this atomic state was duplicated using
377 * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers
378 * should use this to fixup normal inconsistencies in duplicated
379 * states.
380 */
381 bool duplicated : 1;
382 struct __drm_planes_state *planes;
383 struct __drm_crtcs_state *crtcs;
384 int num_connector;
385 struct __drm_connnectors_state *connectors;
386 int num_private_objs;
387 struct __drm_private_objs_state *private_objs;
388
389 struct drm_modeset_acquire_ctx *acquire_ctx;
390
391 /**
392 * @fake_commit:
393 *
394 * Used for signaling unbound planes/connectors.
395 * When a connector or plane is not bound to any CRTC, it's still important
396 * to preserve linearity to prevent the atomic states from being freed to early.
397 *
398 * This commit (if set) is not bound to any CRTC, but will be completed when
399 * drm_atomic_helper_commit_hw_done() is called.
400 */
401 struct drm_crtc_commit *fake_commit;
402
403 /**
404 * @commit_work:
405 *
406 * Work item which can be used by the driver or helpers to execute the
407 * commit without blocking.
408 */
409 struct work_struct commit_work;
410};
411
412void __drm_crtc_commit_free(struct kref *kref);
413
414/**
415 * drm_crtc_commit_get - acquire a reference to the CRTC commit
416 * @commit: CRTC commit
417 *
418 * Increases the reference of @commit.
419 *
420 * Returns:
421 * The pointer to @commit, with reference increased.
422 */
423static inline struct drm_crtc_commit *drm_crtc_commit_get(struct drm_crtc_commit *commit)
424{
425 kref_get(&commit->ref);
426 return commit;
427}
428
429/**
430 * drm_crtc_commit_put - release a reference to the CRTC commmit
431 * @commit: CRTC commit
432 *
433 * This releases a reference to @commit which is freed after removing the
434 * final reference. No locking required and callable from any context.
435 */
436static inline void drm_crtc_commit_put(struct drm_crtc_commit *commit)
437{
438 kref_put(&commit->ref, __drm_crtc_commit_free);
439}
440
441int drm_crtc_commit_wait(struct drm_crtc_commit *commit);
442
443struct drm_atomic_state * __must_check
444drm_atomic_state_alloc(struct drm_device *dev);
445void drm_atomic_state_clear(struct drm_atomic_state *state);
446
447/**
448 * drm_atomic_state_get - acquire a reference to the atomic state
449 * @state: The atomic state
450 *
451 * Returns a new reference to the @state
452 */
453static inline struct drm_atomic_state *
454drm_atomic_state_get(struct drm_atomic_state *state)
455{
456 kref_get(&state->ref);
457 return state;
458}
459
460void __drm_atomic_state_free(struct kref *ref);
461
462/**
463 * drm_atomic_state_put - release a reference to the atomic state
464 * @state: The atomic state
465 *
466 * This releases a reference to @state which is freed after removing the
467 * final reference. No locking required and callable from any context.
468 */
469static inline void drm_atomic_state_put(struct drm_atomic_state *state)
470{
471 kref_put(&state->ref, __drm_atomic_state_free);
472}
473
474int __must_check
475drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state);
476void drm_atomic_state_default_clear(struct drm_atomic_state *state);
477void drm_atomic_state_default_release(struct drm_atomic_state *state);
478
479struct drm_crtc_state * __must_check
480drm_atomic_get_crtc_state(struct drm_atomic_state *state,
481 struct drm_crtc *crtc);
482struct drm_plane_state * __must_check
483drm_atomic_get_plane_state(struct drm_atomic_state *state,
484 struct drm_plane *plane);
485struct drm_connector_state * __must_check
486drm_atomic_get_connector_state(struct drm_atomic_state *state,
487 struct drm_connector *connector);
488
489void drm_atomic_private_obj_init(struct drm_device *dev,
490 struct drm_private_obj *obj,
491 struct drm_private_state *state,
492 const struct drm_private_state_funcs *funcs);
493void drm_atomic_private_obj_fini(struct drm_private_obj *obj);
494
495struct drm_private_state * __must_check
496drm_atomic_get_private_obj_state(struct drm_atomic_state *state,
497 struct drm_private_obj *obj);
498struct drm_private_state *
499drm_atomic_get_old_private_obj_state(struct drm_atomic_state *state,
500 struct drm_private_obj *obj);
501struct drm_private_state *
502drm_atomic_get_new_private_obj_state(struct drm_atomic_state *state,
503 struct drm_private_obj *obj);
504
505struct drm_connector *
506drm_atomic_get_old_connector_for_encoder(struct drm_atomic_state *state,
507 struct drm_encoder *encoder);
508struct drm_connector *
509drm_atomic_get_new_connector_for_encoder(struct drm_atomic_state *state,
510 struct drm_encoder *encoder);
511
512/**
513 * drm_atomic_get_existing_crtc_state - get CRTC state, if it exists
514 * @state: global atomic state object
515 * @crtc: CRTC to grab
516 *
517 * This function returns the CRTC state for the given CRTC, or NULL
518 * if the CRTC is not part of the global atomic state.
519 *
520 * This function is deprecated, @drm_atomic_get_old_crtc_state or
521 * @drm_atomic_get_new_crtc_state should be used instead.
522 */
523static inline struct drm_crtc_state *
524drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state,
525 struct drm_crtc *crtc)
526{
527 return state->crtcs[drm_crtc_index(crtc)].state;
528}
529
530/**
531 * drm_atomic_get_old_crtc_state - get old CRTC state, if it exists
532 * @state: global atomic state object
533 * @crtc: CRTC to grab
534 *
535 * This function returns the old CRTC state for the given CRTC, or
536 * NULL if the CRTC is not part of the global atomic state.
537 */
538static inline struct drm_crtc_state *
539drm_atomic_get_old_crtc_state(struct drm_atomic_state *state,
540 struct drm_crtc *crtc)
541{
542 return state->crtcs[drm_crtc_index(crtc)].old_state;
543}
544/**
545 * drm_atomic_get_new_crtc_state - get new CRTC state, if it exists
546 * @state: global atomic state object
547 * @crtc: CRTC to grab
548 *
549 * This function returns the new CRTC state for the given CRTC, or
550 * NULL if the CRTC is not part of the global atomic state.
551 */
552static inline struct drm_crtc_state *
553drm_atomic_get_new_crtc_state(struct drm_atomic_state *state,
554 struct drm_crtc *crtc)
555{
556 return state->crtcs[drm_crtc_index(crtc)].new_state;
557}
558
559/**
560 * drm_atomic_get_existing_plane_state - get plane state, if it exists
561 * @state: global atomic state object
562 * @plane: plane to grab
563 *
564 * This function returns the plane state for the given plane, or NULL
565 * if the plane is not part of the global atomic state.
566 *
567 * This function is deprecated, @drm_atomic_get_old_plane_state or
568 * @drm_atomic_get_new_plane_state should be used instead.
569 */
570static inline struct drm_plane_state *
571drm_atomic_get_existing_plane_state(struct drm_atomic_state *state,
572 struct drm_plane *plane)
573{
574 return state->planes[drm_plane_index(plane)].state;
575}
576
577/**
578 * drm_atomic_get_old_plane_state - get plane state, if it exists
579 * @state: global atomic state object
580 * @plane: plane to grab
581 *
582 * This function returns the old plane state for the given plane, or
583 * NULL if the plane is not part of the global atomic state.
584 */
585static inline struct drm_plane_state *
586drm_atomic_get_old_plane_state(struct drm_atomic_state *state,
587 struct drm_plane *plane)
588{
589 return state->planes[drm_plane_index(plane)].old_state;
590}
591
592/**
593 * drm_atomic_get_new_plane_state - get plane state, if it exists
594 * @state: global atomic state object
595 * @plane: plane to grab
596 *
597 * This function returns the new plane state for the given plane, or
598 * NULL if the plane is not part of the global atomic state.
599 */
600static inline struct drm_plane_state *
601drm_atomic_get_new_plane_state(struct drm_atomic_state *state,
602 struct drm_plane *plane)
603{
604 return state->planes[drm_plane_index(plane)].new_state;
605}
606
607/**
608 * drm_atomic_get_existing_connector_state - get connector state, if it exists
609 * @state: global atomic state object
610 * @connector: connector to grab
611 *
612 * This function returns the connector state for the given connector,
613 * or NULL if the connector is not part of the global atomic state.
614 *
615 * This function is deprecated, @drm_atomic_get_old_connector_state or
616 * @drm_atomic_get_new_connector_state should be used instead.
617 */
618static inline struct drm_connector_state *
619drm_atomic_get_existing_connector_state(struct drm_atomic_state *state,
620 struct drm_connector *connector)
621{
622 int index = drm_connector_index(connector);
623
624 if (index >= state->num_connector)
625 return NULL;
626
627 return state->connectors[index].state;
628}
629
630/**
631 * drm_atomic_get_old_connector_state - get connector state, if it exists
632 * @state: global atomic state object
633 * @connector: connector to grab
634 *
635 * This function returns the old connector state for the given connector,
636 * or NULL if the connector is not part of the global atomic state.
637 */
638static inline struct drm_connector_state *
639drm_atomic_get_old_connector_state(struct drm_atomic_state *state,
640 struct drm_connector *connector)
641{
642 int index = drm_connector_index(connector);
643
644 if (index >= state->num_connector)
645 return NULL;
646
647 return state->connectors[index].old_state;
648}
649
650/**
651 * drm_atomic_get_new_connector_state - get connector state, if it exists
652 * @state: global atomic state object
653 * @connector: connector to grab
654 *
655 * This function returns the new connector state for the given connector,
656 * or NULL if the connector is not part of the global atomic state.
657 */
658static inline struct drm_connector_state *
659drm_atomic_get_new_connector_state(struct drm_atomic_state *state,
660 struct drm_connector *connector)
661{
662 int index = drm_connector_index(connector);
663
664 if (index >= state->num_connector)
665 return NULL;
666
667 return state->connectors[index].new_state;
668}
669
670/**
671 * __drm_atomic_get_current_plane_state - get current plane state
672 * @state: global atomic state object
673 * @plane: plane to grab
674 *
675 * This function returns the plane state for the given plane, either from
676 * @state, or if the plane isn't part of the atomic state update, from @plane.
677 * This is useful in atomic check callbacks, when drivers need to peek at, but
678 * not change, state of other planes, since it avoids threading an error code
679 * back up the call chain.
680 *
681 * WARNING:
682 *
683 * Note that this function is in general unsafe since it doesn't check for the
684 * required locking for access state structures. Drivers must ensure that it is
685 * safe to access the returned state structure through other means. One common
686 * example is when planes are fixed to a single CRTC, and the driver knows that
687 * the CRTC lock is held already. In that case holding the CRTC lock gives a
688 * read-lock on all planes connected to that CRTC. But if planes can be
689 * reassigned things get more tricky. In that case it's better to use
690 * drm_atomic_get_plane_state and wire up full error handling.
691 *
692 * Returns:
693 *
694 * Read-only pointer to the current plane state.
695 */
696static inline const struct drm_plane_state *
697__drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
698 struct drm_plane *plane)
699{
700 if (state->planes[drm_plane_index(plane)].state)
701 return state->planes[drm_plane_index(plane)].state;
702
703 return plane->state;
704}
705
706int __must_check
707drm_atomic_add_encoder_bridges(struct drm_atomic_state *state,
708 struct drm_encoder *encoder);
709int __must_check
710drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
711 struct drm_crtc *crtc);
712int __must_check
713drm_atomic_add_affected_planes(struct drm_atomic_state *state,
714 struct drm_crtc *crtc);
715
716int __must_check drm_atomic_check_only(struct drm_atomic_state *state);
717int __must_check drm_atomic_commit(struct drm_atomic_state *state);
718int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state);
719
720void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
721
722/**
723 * for_each_oldnew_connector_in_state - iterate over all connectors in an atomic update
724 * @__state: &struct drm_atomic_state pointer
725 * @connector: &struct drm_connector iteration cursor
726 * @old_connector_state: &struct drm_connector_state iteration cursor for the
727 * old state
728 * @new_connector_state: &struct drm_connector_state iteration cursor for the
729 * new state
730 * @__i: int iteration cursor, for macro-internal use
731 *
732 * This iterates over all connectors in an atomic update, tracking both old and
733 * new state. This is useful in places where the state delta needs to be
734 * considered, for example in atomic check functions.
735 */
736#define for_each_oldnew_connector_in_state(__state, connector, old_connector_state, new_connector_state, __i) \
737 for ((__i) = 0; \
738 (__i) < (__state)->num_connector; \
739 (__i)++) \
740 for_each_if ((__state)->connectors[__i].ptr && \
741 ((connector) = (__state)->connectors[__i].ptr, \
742 (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
743 (old_connector_state) = (__state)->connectors[__i].old_state, \
744 (new_connector_state) = (__state)->connectors[__i].new_state, 1))
745
746/**
747 * for_each_old_connector_in_state - iterate over all connectors in an atomic update
748 * @__state: &struct drm_atomic_state pointer
749 * @connector: &struct drm_connector iteration cursor
750 * @old_connector_state: &struct drm_connector_state iteration cursor for the
751 * old state
752 * @__i: int iteration cursor, for macro-internal use
753 *
754 * This iterates over all connectors in an atomic update, tracking only the old
755 * state. This is useful in disable functions, where we need the old state the
756 * hardware is still in.
757 */
758#define for_each_old_connector_in_state(__state, connector, old_connector_state, __i) \
759 for ((__i) = 0; \
760 (__i) < (__state)->num_connector; \
761 (__i)++) \
762 for_each_if ((__state)->connectors[__i].ptr && \
763 ((connector) = (__state)->connectors[__i].ptr, \
764 (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
765 (old_connector_state) = (__state)->connectors[__i].old_state, 1))
766
767/**
768 * for_each_new_connector_in_state - iterate over all connectors in an atomic update
769 * @__state: &struct drm_atomic_state pointer
770 * @connector: &struct drm_connector iteration cursor
771 * @new_connector_state: &struct drm_connector_state iteration cursor for the
772 * new state
773 * @__i: int iteration cursor, for macro-internal use
774 *
775 * This iterates over all connectors in an atomic update, tracking only the new
776 * state. This is useful in enable functions, where we need the new state the
777 * hardware should be in when the atomic commit operation has completed.
778 */
779#define for_each_new_connector_in_state(__state, connector, new_connector_state, __i) \
780 for ((__i) = 0; \
781 (__i) < (__state)->num_connector; \
782 (__i)++) \
783 for_each_if ((__state)->connectors[__i].ptr && \
784 ((connector) = (__state)->connectors[__i].ptr, \
785 (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
786 (new_connector_state) = (__state)->connectors[__i].new_state, \
787 (void)(new_connector_state) /* Only to avoid unused-but-set-variable warning */, 1))
788
789/**
790 * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
791 * @__state: &struct drm_atomic_state pointer
792 * @crtc: &struct drm_crtc iteration cursor
793 * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state
794 * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state
795 * @__i: int iteration cursor, for macro-internal use
796 *
797 * This iterates over all CRTCs in an atomic update, tracking both old and
798 * new state. This is useful in places where the state delta needs to be
799 * considered, for example in atomic check functions.
800 */
801#define for_each_oldnew_crtc_in_state(__state, crtc, old_crtc_state, new_crtc_state, __i) \
802 for ((__i) = 0; \
803 (__i) < (__state)->dev->mode_config.num_crtc; \
804 (__i)++) \
805 for_each_if ((__state)->crtcs[__i].ptr && \
806 ((crtc) = (__state)->crtcs[__i].ptr, \
807 (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
808 (old_crtc_state) = (__state)->crtcs[__i].old_state, \
809 (void)(old_crtc_state) /* Only to avoid unused-but-set-variable warning */, \
810 (new_crtc_state) = (__state)->crtcs[__i].new_state, \
811 (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
812
813/**
814 * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update
815 * @__state: &struct drm_atomic_state pointer
816 * @crtc: &struct drm_crtc iteration cursor
817 * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state
818 * @__i: int iteration cursor, for macro-internal use
819 *
820 * This iterates over all CRTCs in an atomic update, tracking only the old
821 * state. This is useful in disable functions, where we need the old state the
822 * hardware is still in.
823 */
824#define for_each_old_crtc_in_state(__state, crtc, old_crtc_state, __i) \
825 for ((__i) = 0; \
826 (__i) < (__state)->dev->mode_config.num_crtc; \
827 (__i)++) \
828 for_each_if ((__state)->crtcs[__i].ptr && \
829 ((crtc) = (__state)->crtcs[__i].ptr, \
830 (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
831 (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))
832
833/**
834 * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update
835 * @__state: &struct drm_atomic_state pointer
836 * @crtc: &struct drm_crtc iteration cursor
837 * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state
838 * @__i: int iteration cursor, for macro-internal use
839 *
840 * This iterates over all CRTCs in an atomic update, tracking only the new
841 * state. This is useful in enable functions, where we need the new state the
842 * hardware should be in when the atomic commit operation has completed.
843 */
844#define for_each_new_crtc_in_state(__state, crtc, new_crtc_state, __i) \
845 for ((__i) = 0; \
846 (__i) < (__state)->dev->mode_config.num_crtc; \
847 (__i)++) \
848 for_each_if ((__state)->crtcs[__i].ptr && \
849 ((crtc) = (__state)->crtcs[__i].ptr, \
850 (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
851 (new_crtc_state) = (__state)->crtcs[__i].new_state, \
852 (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
853
854/**
855 * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
856 * @__state: &struct drm_atomic_state pointer
857 * @plane: &struct drm_plane iteration cursor
858 * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
859 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
860 * @__i: int iteration cursor, for macro-internal use
861 *
862 * This iterates over all planes in an atomic update, tracking both old and
863 * new state. This is useful in places where the state delta needs to be
864 * considered, for example in atomic check functions.
865 */
866#define for_each_oldnew_plane_in_state(__state, plane, old_plane_state, new_plane_state, __i) \
867 for ((__i) = 0; \
868 (__i) < (__state)->dev->mode_config.num_total_plane; \
869 (__i)++) \
870 for_each_if ((__state)->planes[__i].ptr && \
871 ((plane) = (__state)->planes[__i].ptr, \
872 (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
873 (old_plane_state) = (__state)->planes[__i].old_state,\
874 (new_plane_state) = (__state)->planes[__i].new_state, 1))
875
876/**
877 * for_each_oldnew_plane_in_state_reverse - iterate over all planes in an atomic
878 * update in reverse order
879 * @__state: &struct drm_atomic_state pointer
880 * @plane: &struct drm_plane iteration cursor
881 * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
882 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
883 * @__i: int iteration cursor, for macro-internal use
884 *
885 * This iterates over all planes in an atomic update in reverse order,
886 * tracking both old and new state. This is useful in places where the
887 * state delta needs to be considered, for example in atomic check functions.
888 */
889#define for_each_oldnew_plane_in_state_reverse(__state, plane, old_plane_state, new_plane_state, __i) \
890 for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1); \
891 (__i) >= 0; \
892 (__i)--) \
893 for_each_if ((__state)->planes[__i].ptr && \
894 ((plane) = (__state)->planes[__i].ptr, \
895 (old_plane_state) = (__state)->planes[__i].old_state,\
896 (new_plane_state) = (__state)->planes[__i].new_state, 1))
897
898/**
899 * for_each_new_plane_in_state_reverse - other than only tracking new state,
900 * it's the same as for_each_oldnew_plane_in_state_reverse
901 * @__state: &struct drm_atomic_state pointer
902 * @plane: &struct drm_plane iteration cursor
903 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
904 * @__i: int iteration cursor, for macro-internal use
905 */
906#define for_each_new_plane_in_state_reverse(__state, plane, new_plane_state, __i) \
907 for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1); \
908 (__i) >= 0; \
909 (__i)--) \
910 for_each_if ((__state)->planes[__i].ptr && \
911 ((plane) = (__state)->planes[__i].ptr, \
912 (new_plane_state) = (__state)->planes[__i].new_state, 1))
913
914/**
915 * for_each_old_plane_in_state - iterate over all planes in an atomic update
916 * @__state: &struct drm_atomic_state pointer
917 * @plane: &struct drm_plane iteration cursor
918 * @old_plane_state: &struct drm_plane_state iteration cursor for the old state
919 * @__i: int iteration cursor, for macro-internal use
920 *
921 * This iterates over all planes in an atomic update, tracking only the old
922 * state. This is useful in disable functions, where we need the old state the
923 * hardware is still in.
924 */
925#define for_each_old_plane_in_state(__state, plane, old_plane_state, __i) \
926 for ((__i) = 0; \
927 (__i) < (__state)->dev->mode_config.num_total_plane; \
928 (__i)++) \
929 for_each_if ((__state)->planes[__i].ptr && \
930 ((plane) = (__state)->planes[__i].ptr, \
931 (old_plane_state) = (__state)->planes[__i].old_state, 1))
932/**
933 * for_each_new_plane_in_state - iterate over all planes in an atomic update
934 * @__state: &struct drm_atomic_state pointer
935 * @plane: &struct drm_plane iteration cursor
936 * @new_plane_state: &struct drm_plane_state iteration cursor for the new state
937 * @__i: int iteration cursor, for macro-internal use
938 *
939 * This iterates over all planes in an atomic update, tracking only the new
940 * state. This is useful in enable functions, where we need the new state the
941 * hardware should be in when the atomic commit operation has completed.
942 */
943#define for_each_new_plane_in_state(__state, plane, new_plane_state, __i) \
944 for ((__i) = 0; \
945 (__i) < (__state)->dev->mode_config.num_total_plane; \
946 (__i)++) \
947 for_each_if ((__state)->planes[__i].ptr && \
948 ((plane) = (__state)->planes[__i].ptr, \
949 (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
950 (new_plane_state) = (__state)->planes[__i].new_state, \
951 (void)(new_plane_state) /* Only to avoid unused-but-set-variable warning */, 1))
952
953/**
954 * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
955 * @__state: &struct drm_atomic_state pointer
956 * @obj: &struct drm_private_obj iteration cursor
957 * @old_obj_state: &struct drm_private_state iteration cursor for the old state
958 * @new_obj_state: &struct drm_private_state iteration cursor for the new state
959 * @__i: int iteration cursor, for macro-internal use
960 *
961 * This iterates over all private objects in an atomic update, tracking both
962 * old and new state. This is useful in places where the state delta needs
963 * to be considered, for example in atomic check functions.
964 */
965#define for_each_oldnew_private_obj_in_state(__state, obj, old_obj_state, new_obj_state, __i) \
966 for ((__i) = 0; \
967 (__i) < (__state)->num_private_objs && \
968 ((obj) = (__state)->private_objs[__i].ptr, \
969 (old_obj_state) = (__state)->private_objs[__i].old_state, \
970 (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
971 (__i)++)
972
973/**
974 * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update
975 * @__state: &struct drm_atomic_state pointer
976 * @obj: &struct drm_private_obj iteration cursor
977 * @old_obj_state: &struct drm_private_state iteration cursor for the old state
978 * @__i: int iteration cursor, for macro-internal use
979 *
980 * This iterates over all private objects in an atomic update, tracking only
981 * the old state. This is useful in disable functions, where we need the old
982 * state the hardware is still in.
983 */
984#define for_each_old_private_obj_in_state(__state, obj, old_obj_state, __i) \
985 for ((__i) = 0; \
986 (__i) < (__state)->num_private_objs && \
987 ((obj) = (__state)->private_objs[__i].ptr, \
988 (old_obj_state) = (__state)->private_objs[__i].old_state, 1); \
989 (__i)++)
990
991/**
992 * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update
993 * @__state: &struct drm_atomic_state pointer
994 * @obj: &struct drm_private_obj iteration cursor
995 * @new_obj_state: &struct drm_private_state iteration cursor for the new state
996 * @__i: int iteration cursor, for macro-internal use
997 *
998 * This iterates over all private objects in an atomic update, tracking only
999 * the new state. This is useful in enable functions, where we need the new state the
1000 * hardware should be in when the atomic commit operation has completed.
1001 */
1002#define for_each_new_private_obj_in_state(__state, obj, new_obj_state, __i) \
1003 for ((__i) = 0; \
1004 (__i) < (__state)->num_private_objs && \
1005 ((obj) = (__state)->private_objs[__i].ptr, \
1006 (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
1007 (__i)++)
1008
1009/**
1010 * drm_atomic_crtc_needs_modeset - compute combined modeset need
1011 * @state: &drm_crtc_state for the CRTC
1012 *
1013 * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track
1014 * whether the state CRTC changed enough to need a full modeset cycle:
1015 * mode_changed, active_changed and connectors_changed. This helper simply
1016 * combines these three to compute the overall need for a modeset for @state.
1017 *
1018 * The atomic helper code sets these booleans, but drivers can and should
1019 * change them appropriately to accurately represent whether a modeset is
1020 * really needed. In general, drivers should avoid full modesets whenever
1021 * possible.
1022 *
1023 * For example if the CRTC mode has changed, and the hardware is able to enact
1024 * the requested mode change without going through a full modeset, the driver
1025 * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
1026 * implementation.
1027 */
1028static inline bool
1029drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
1030{
1031 return state->mode_changed || state->active_changed ||
1032 state->connectors_changed;
1033}
1034
1035/**
1036 * drm_atomic_crtc_effectively_active - compute whether CRTC is actually active
1037 * @state: &drm_crtc_state for the CRTC
1038 *
1039 * When in self refresh mode, the crtc_state->active value will be false, since
1040 * the CRTC is off. However in some cases we're interested in whether the CRTC
1041 * is active, or effectively active (ie: it's connected to an active display).
1042 * In these cases, use this function instead of just checking active.
1043 */
1044static inline bool
1045drm_atomic_crtc_effectively_active(const struct drm_crtc_state *state)
1046{
1047 return state->active || state->self_refresh_active;
1048}
1049
1050/**
1051 * struct drm_bus_cfg - bus configuration
1052 *
1053 * This structure stores the configuration of a physical bus between two
1054 * components in an output pipeline, usually between two bridges, an encoder
1055 * and a bridge, or a bridge and a connector.
1056 *
1057 * The bus configuration is stored in &drm_bridge_state separately for the
1058 * input and output buses, as seen from the point of view of each bridge. The
1059 * bus configuration of a bridge output is usually identical to the
1060 * configuration of the next bridge's input, but may differ if the signals are
1061 * modified between the two bridges, for instance by an inverter on the board.
1062 * The input and output configurations of a bridge may differ if the bridge
1063 * modifies the signals internally, for instance by performing format
1064 * conversion, or modifying signals polarities.
1065 */
1066struct drm_bus_cfg {
1067 /**
1068 * @format: format used on this bus (one of the MEDIA_BUS_FMT_* format)
1069 *
1070 * This field should not be directly modified by drivers
1071 * (drm_atomic_bridge_chain_select_bus_fmts() takes care of the bus
1072 * format negotiation).
1073 */
1074 u32 format;
1075
1076 /**
1077 * @flags: DRM_BUS_* flags used on this bus
1078 */
1079 u32 flags;
1080};
1081
1082/**
1083 * struct drm_bridge_state - Atomic bridge state object
1084 */
1085struct drm_bridge_state {
1086 /**
1087 * @base: inherit from &drm_private_state
1088 */
1089 struct drm_private_state base;
1090
1091 /**
1092 * @bridge: the bridge this state refers to
1093 */
1094 struct drm_bridge *bridge;
1095
1096 /**
1097 * @input_bus_cfg: input bus configuration
1098 */
1099 struct drm_bus_cfg input_bus_cfg;
1100
1101 /**
1102 * @output_bus_cfg: input bus configuration
1103 */
1104 struct drm_bus_cfg output_bus_cfg;
1105};
1106
1107static inline struct drm_bridge_state *
1108drm_priv_to_bridge_state(struct drm_private_state *priv)
1109{
1110 return container_of(priv, struct drm_bridge_state, base);
1111}
1112
1113struct drm_bridge_state *
1114drm_atomic_get_bridge_state(struct drm_atomic_state *state,
1115 struct drm_bridge *bridge);
1116struct drm_bridge_state *
1117drm_atomic_get_old_bridge_state(struct drm_atomic_state *state,
1118 struct drm_bridge *bridge);
1119struct drm_bridge_state *
1120drm_atomic_get_new_bridge_state(struct drm_atomic_state *state,
1121 struct drm_bridge *bridge);
1122
1123#endif /* DRM_ATOMIC_H_ */