Loading...
1// SPDX-License-Identifier: GPL-2.0
2
3/*
4 * Clocksource driver for the synthetic counter and timers
5 * provided by the Hyper-V hypervisor to guest VMs, as described
6 * in the Hyper-V Top Level Functional Spec (TLFS). This driver
7 * is instruction set architecture independent.
8 *
9 * Copyright (C) 2019, Microsoft, Inc.
10 *
11 * Author: Michael Kelley <mikelley@microsoft.com>
12 */
13
14#include <linux/percpu.h>
15#include <linux/cpumask.h>
16#include <linux/clockchips.h>
17#include <linux/clocksource.h>
18#include <linux/sched_clock.h>
19#include <linux/mm.h>
20#include <linux/cpuhotplug.h>
21#include <linux/interrupt.h>
22#include <linux/irq.h>
23#include <linux/acpi.h>
24#include <linux/hyperv.h>
25#include <clocksource/hyperv_timer.h>
26#include <asm/hyperv-tlfs.h>
27#include <asm/mshyperv.h>
28
29static struct clock_event_device __percpu *hv_clock_event;
30static u64 hv_sched_clock_offset __ro_after_init;
31
32/*
33 * If false, we're using the old mechanism for stimer0 interrupts
34 * where it sends a VMbus message when it expires. The old
35 * mechanism is used when running on older versions of Hyper-V
36 * that don't support Direct Mode. While Hyper-V provides
37 * four stimer's per CPU, Linux uses only stimer0.
38 *
39 * Because Direct Mode does not require processing a VMbus
40 * message, stimer interrupts can be enabled earlier in the
41 * process of booting a CPU, and consistent with when timer
42 * interrupts are enabled for other clocksource drivers.
43 * However, for legacy versions of Hyper-V when Direct Mode
44 * is not enabled, setting up stimer interrupts must be
45 * delayed until VMbus is initialized and can process the
46 * interrupt message.
47 */
48static bool direct_mode_enabled;
49
50static int stimer0_irq = -1;
51static int stimer0_message_sint;
52static DEFINE_PER_CPU(long, stimer0_evt);
53
54/*
55 * Common code for stimer0 interrupts coming via Direct Mode or
56 * as a VMbus message.
57 */
58void hv_stimer0_isr(void)
59{
60 struct clock_event_device *ce;
61
62 ce = this_cpu_ptr(hv_clock_event);
63 ce->event_handler(ce);
64}
65EXPORT_SYMBOL_GPL(hv_stimer0_isr);
66
67/*
68 * stimer0 interrupt handler for architectures that support
69 * per-cpu interrupts, which also implies Direct Mode.
70 */
71static irqreturn_t hv_stimer0_percpu_isr(int irq, void *dev_id)
72{
73 hv_stimer0_isr();
74 return IRQ_HANDLED;
75}
76
77static int hv_ce_set_next_event(unsigned long delta,
78 struct clock_event_device *evt)
79{
80 u64 current_tick;
81
82 current_tick = hv_read_reference_counter();
83 current_tick += delta;
84 hv_set_register(HV_REGISTER_STIMER0_COUNT, current_tick);
85 return 0;
86}
87
88static int hv_ce_shutdown(struct clock_event_device *evt)
89{
90 hv_set_register(HV_REGISTER_STIMER0_COUNT, 0);
91 hv_set_register(HV_REGISTER_STIMER0_CONFIG, 0);
92 if (direct_mode_enabled && stimer0_irq >= 0)
93 disable_percpu_irq(stimer0_irq);
94
95 return 0;
96}
97
98static int hv_ce_set_oneshot(struct clock_event_device *evt)
99{
100 union hv_stimer_config timer_cfg;
101
102 timer_cfg.as_uint64 = 0;
103 timer_cfg.enable = 1;
104 timer_cfg.auto_enable = 1;
105 if (direct_mode_enabled) {
106 /*
107 * When it expires, the timer will directly interrupt
108 * on the specified hardware vector/IRQ.
109 */
110 timer_cfg.direct_mode = 1;
111 timer_cfg.apic_vector = HYPERV_STIMER0_VECTOR;
112 if (stimer0_irq >= 0)
113 enable_percpu_irq(stimer0_irq, IRQ_TYPE_NONE);
114 } else {
115 /*
116 * When it expires, the timer will generate a VMbus message,
117 * to be handled by the normal VMbus interrupt handler.
118 */
119 timer_cfg.direct_mode = 0;
120 timer_cfg.sintx = stimer0_message_sint;
121 }
122 hv_set_register(HV_REGISTER_STIMER0_CONFIG, timer_cfg.as_uint64);
123 return 0;
124}
125
126/*
127 * hv_stimer_init - Per-cpu initialization of the clockevent
128 */
129static int hv_stimer_init(unsigned int cpu)
130{
131 struct clock_event_device *ce;
132
133 if (!hv_clock_event)
134 return 0;
135
136 ce = per_cpu_ptr(hv_clock_event, cpu);
137 ce->name = "Hyper-V clockevent";
138 ce->features = CLOCK_EVT_FEAT_ONESHOT;
139 ce->cpumask = cpumask_of(cpu);
140 ce->rating = 1000;
141 ce->set_state_shutdown = hv_ce_shutdown;
142 ce->set_state_oneshot = hv_ce_set_oneshot;
143 ce->set_next_event = hv_ce_set_next_event;
144
145 clockevents_config_and_register(ce,
146 HV_CLOCK_HZ,
147 HV_MIN_DELTA_TICKS,
148 HV_MAX_MAX_DELTA_TICKS);
149 return 0;
150}
151
152/*
153 * hv_stimer_cleanup - Per-cpu cleanup of the clockevent
154 */
155int hv_stimer_cleanup(unsigned int cpu)
156{
157 struct clock_event_device *ce;
158
159 if (!hv_clock_event)
160 return 0;
161
162 /*
163 * In the legacy case where Direct Mode is not enabled
164 * (which can only be on x86/64), stimer cleanup happens
165 * relatively early in the CPU offlining process. We
166 * must unbind the stimer-based clockevent device so
167 * that the LAPIC timer can take over until clockevents
168 * are no longer needed in the offlining process. Note
169 * that clockevents_unbind_device() eventually calls
170 * hv_ce_shutdown().
171 *
172 * The unbind should not be done when Direct Mode is
173 * enabled because we may be on an architecture where
174 * there are no other clockevent devices to fallback to.
175 */
176 ce = per_cpu_ptr(hv_clock_event, cpu);
177 if (direct_mode_enabled)
178 hv_ce_shutdown(ce);
179 else
180 clockevents_unbind_device(ce, cpu);
181
182 return 0;
183}
184EXPORT_SYMBOL_GPL(hv_stimer_cleanup);
185
186/*
187 * These placeholders are overridden by arch specific code on
188 * architectures that need special setup of the stimer0 IRQ because
189 * they don't support per-cpu IRQs (such as x86/x64).
190 */
191void __weak hv_setup_stimer0_handler(void (*handler)(void))
192{
193};
194
195void __weak hv_remove_stimer0_handler(void)
196{
197};
198
199/* Called only on architectures with per-cpu IRQs (i.e., not x86/x64) */
200static int hv_setup_stimer0_irq(void)
201{
202 int ret;
203
204 ret = acpi_register_gsi(NULL, HYPERV_STIMER0_VECTOR,
205 ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_HIGH);
206 if (ret < 0) {
207 pr_err("Can't register Hyper-V stimer0 GSI. Error %d", ret);
208 return ret;
209 }
210 stimer0_irq = ret;
211
212 ret = request_percpu_irq(stimer0_irq, hv_stimer0_percpu_isr,
213 "Hyper-V stimer0", &stimer0_evt);
214 if (ret) {
215 pr_err("Can't request Hyper-V stimer0 IRQ %d. Error %d",
216 stimer0_irq, ret);
217 acpi_unregister_gsi(stimer0_irq);
218 stimer0_irq = -1;
219 }
220 return ret;
221}
222
223static void hv_remove_stimer0_irq(void)
224{
225 if (stimer0_irq == -1) {
226 hv_remove_stimer0_handler();
227 } else {
228 free_percpu_irq(stimer0_irq, &stimer0_evt);
229 acpi_unregister_gsi(stimer0_irq);
230 stimer0_irq = -1;
231 }
232}
233
234/* hv_stimer_alloc - Global initialization of the clockevent and stimer0 */
235int hv_stimer_alloc(bool have_percpu_irqs)
236{
237 int ret;
238
239 /*
240 * Synthetic timers are always available except on old versions of
241 * Hyper-V on x86. In that case, return as error as Linux will use a
242 * clockevent based on emulated LAPIC timer hardware.
243 */
244 if (!(ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE))
245 return -EINVAL;
246
247 hv_clock_event = alloc_percpu(struct clock_event_device);
248 if (!hv_clock_event)
249 return -ENOMEM;
250
251 direct_mode_enabled = ms_hyperv.misc_features &
252 HV_STIMER_DIRECT_MODE_AVAILABLE;
253
254 /*
255 * If Direct Mode isn't enabled, the remainder of the initialization
256 * is done later by hv_stimer_legacy_init()
257 */
258 if (!direct_mode_enabled)
259 return 0;
260
261 if (have_percpu_irqs) {
262 ret = hv_setup_stimer0_irq();
263 if (ret)
264 goto free_clock_event;
265 } else {
266 hv_setup_stimer0_handler(hv_stimer0_isr);
267 }
268
269 /*
270 * Since we are in Direct Mode, stimer initialization
271 * can be done now with a CPUHP value in the same range
272 * as other clockevent devices.
273 */
274 ret = cpuhp_setup_state(CPUHP_AP_HYPERV_TIMER_STARTING,
275 "clockevents/hyperv/stimer:starting",
276 hv_stimer_init, hv_stimer_cleanup);
277 if (ret < 0) {
278 hv_remove_stimer0_irq();
279 goto free_clock_event;
280 }
281 return ret;
282
283free_clock_event:
284 free_percpu(hv_clock_event);
285 hv_clock_event = NULL;
286 return ret;
287}
288EXPORT_SYMBOL_GPL(hv_stimer_alloc);
289
290/*
291 * hv_stimer_legacy_init -- Called from the VMbus driver to handle
292 * the case when Direct Mode is not enabled, and the stimer
293 * must be initialized late in the CPU onlining process.
294 *
295 */
296void hv_stimer_legacy_init(unsigned int cpu, int sint)
297{
298 if (direct_mode_enabled)
299 return;
300
301 /*
302 * This function gets called by each vCPU, so setting the
303 * global stimer_message_sint value each time is conceptually
304 * not ideal, but the value passed in is always the same and
305 * it avoids introducing yet another interface into this
306 * clocksource driver just to set the sint in the legacy case.
307 */
308 stimer0_message_sint = sint;
309 (void)hv_stimer_init(cpu);
310}
311EXPORT_SYMBOL_GPL(hv_stimer_legacy_init);
312
313/*
314 * hv_stimer_legacy_cleanup -- Called from the VMbus driver to
315 * handle the case when Direct Mode is not enabled, and the
316 * stimer must be cleaned up early in the CPU offlining
317 * process.
318 */
319void hv_stimer_legacy_cleanup(unsigned int cpu)
320{
321 if (direct_mode_enabled)
322 return;
323 (void)hv_stimer_cleanup(cpu);
324}
325EXPORT_SYMBOL_GPL(hv_stimer_legacy_cleanup);
326
327/*
328 * Do a global cleanup of clockevents for the cases of kexec and
329 * vmbus exit
330 */
331void hv_stimer_global_cleanup(void)
332{
333 int cpu;
334
335 /*
336 * hv_stime_legacy_cleanup() will stop the stimer if Direct
337 * Mode is not enabled, and fallback to the LAPIC timer.
338 */
339 for_each_present_cpu(cpu) {
340 hv_stimer_legacy_cleanup(cpu);
341 }
342
343 if (!hv_clock_event)
344 return;
345
346 if (direct_mode_enabled) {
347 cpuhp_remove_state(CPUHP_AP_HYPERV_TIMER_STARTING);
348 hv_remove_stimer0_irq();
349 stimer0_irq = -1;
350 }
351 free_percpu(hv_clock_event);
352 hv_clock_event = NULL;
353
354}
355EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
356
357/*
358 * Code and definitions for the Hyper-V clocksources. Two
359 * clocksources are defined: one that reads the Hyper-V defined MSR, and
360 * the other that uses the TSC reference page feature as defined in the
361 * TLFS. The MSR version is for compatibility with old versions of
362 * Hyper-V and 32-bit x86. The TSC reference page version is preferred.
363 */
364
365static union {
366 struct ms_hyperv_tsc_page page;
367 u8 reserved[PAGE_SIZE];
368} tsc_pg __aligned(PAGE_SIZE);
369
370static struct ms_hyperv_tsc_page *tsc_page = &tsc_pg.page;
371static unsigned long tsc_pfn;
372
373unsigned long hv_get_tsc_pfn(void)
374{
375 return tsc_pfn;
376}
377EXPORT_SYMBOL_GPL(hv_get_tsc_pfn);
378
379struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
380{
381 return tsc_page;
382}
383EXPORT_SYMBOL_GPL(hv_get_tsc_page);
384
385static u64 notrace read_hv_clock_tsc(void)
386{
387 u64 current_tick = hv_read_tsc_page(hv_get_tsc_page());
388
389 if (current_tick == U64_MAX)
390 current_tick = hv_get_register(HV_REGISTER_TIME_REF_COUNT);
391
392 return current_tick;
393}
394
395static u64 notrace read_hv_clock_tsc_cs(struct clocksource *arg)
396{
397 return read_hv_clock_tsc();
398}
399
400static u64 notrace read_hv_sched_clock_tsc(void)
401{
402 return (read_hv_clock_tsc() - hv_sched_clock_offset) *
403 (NSEC_PER_SEC / HV_CLOCK_HZ);
404}
405
406static void suspend_hv_clock_tsc(struct clocksource *arg)
407{
408 union hv_reference_tsc_msr tsc_msr;
409
410 /* Disable the TSC page */
411 tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
412 tsc_msr.enable = 0;
413 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
414}
415
416
417static void resume_hv_clock_tsc(struct clocksource *arg)
418{
419 union hv_reference_tsc_msr tsc_msr;
420
421 /* Re-enable the TSC page */
422 tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
423 tsc_msr.enable = 1;
424 tsc_msr.pfn = tsc_pfn;
425 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
426}
427
428#ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
429static int hv_cs_enable(struct clocksource *cs)
430{
431 vclocks_set_used(VDSO_CLOCKMODE_HVCLOCK);
432 return 0;
433}
434#endif
435
436static struct clocksource hyperv_cs_tsc = {
437 .name = "hyperv_clocksource_tsc_page",
438 .rating = 500,
439 .read = read_hv_clock_tsc_cs,
440 .mask = CLOCKSOURCE_MASK(64),
441 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
442 .suspend= suspend_hv_clock_tsc,
443 .resume = resume_hv_clock_tsc,
444#ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
445 .enable = hv_cs_enable,
446 .vdso_clock_mode = VDSO_CLOCKMODE_HVCLOCK,
447#else
448 .vdso_clock_mode = VDSO_CLOCKMODE_NONE,
449#endif
450};
451
452static u64 notrace read_hv_clock_msr(void)
453{
454 /*
455 * Read the partition counter to get the current tick count. This count
456 * is set to 0 when the partition is created and is incremented in
457 * 100 nanosecond units.
458 */
459 return hv_get_register(HV_REGISTER_TIME_REF_COUNT);
460}
461
462static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg)
463{
464 return read_hv_clock_msr();
465}
466
467static u64 notrace read_hv_sched_clock_msr(void)
468{
469 return (read_hv_clock_msr() - hv_sched_clock_offset) *
470 (NSEC_PER_SEC / HV_CLOCK_HZ);
471}
472
473static struct clocksource hyperv_cs_msr = {
474 .name = "hyperv_clocksource_msr",
475 .rating = 500,
476 .read = read_hv_clock_msr_cs,
477 .mask = CLOCKSOURCE_MASK(64),
478 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
479};
480
481/*
482 * Reference to pv_ops must be inline so objtool
483 * detection of noinstr violations can work correctly.
484 */
485#ifdef CONFIG_GENERIC_SCHED_CLOCK
486static __always_inline void hv_setup_sched_clock(void *sched_clock)
487{
488 /*
489 * We're on an architecture with generic sched clock (not x86/x64).
490 * The Hyper-V sched clock read function returns nanoseconds, not
491 * the normal 100ns units of the Hyper-V synthetic clock.
492 */
493 sched_clock_register(sched_clock, 64, NSEC_PER_SEC);
494}
495#elif defined CONFIG_PARAVIRT
496static __always_inline void hv_setup_sched_clock(void *sched_clock)
497{
498 /* We're on x86/x64 *and* using PV ops */
499 paravirt_set_sched_clock(sched_clock);
500}
501#else /* !CONFIG_GENERIC_SCHED_CLOCK && !CONFIG_PARAVIRT */
502static __always_inline void hv_setup_sched_clock(void *sched_clock) {}
503#endif /* CONFIG_GENERIC_SCHED_CLOCK */
504
505static bool __init hv_init_tsc_clocksource(void)
506{
507 union hv_reference_tsc_msr tsc_msr;
508
509 if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
510 return false;
511
512 /*
513 * If Hyper-V offers TSC_INVARIANT, then the virtualized TSC correctly
514 * handles frequency and offset changes due to live migration,
515 * pause/resume, and other VM management operations. So lower the
516 * Hyper-V Reference TSC rating, causing the generic TSC to be used.
517 * TSC_INVARIANT is not offered on ARM64, so the Hyper-V Reference
518 * TSC will be preferred over the virtualized ARM64 arch counter.
519 * While the Hyper-V MSR clocksource won't be used since the
520 * Reference TSC clocksource is present, change its rating as
521 * well for consistency.
522 */
523 if (ms_hyperv.features & HV_ACCESS_TSC_INVARIANT) {
524 hyperv_cs_tsc.rating = 250;
525 hyperv_cs_msr.rating = 250;
526 }
527
528 hv_read_reference_counter = read_hv_clock_tsc;
529
530 /*
531 * TSC page mapping works differently in root compared to guest.
532 * - In guest partition the guest PFN has to be passed to the
533 * hypervisor.
534 * - In root partition it's other way around: it has to map the PFN
535 * provided by the hypervisor.
536 * But it can't be mapped right here as it's too early and MMU isn't
537 * ready yet. So, we only set the enable bit here and will remap the
538 * page later in hv_remap_tsc_clocksource().
539 *
540 * It worth mentioning, that TSC clocksource read function
541 * (read_hv_clock_tsc) has a MSR-based fallback mechanism, used when
542 * TSC page is zeroed (which is the case until the PFN is remapped) and
543 * thus TSC clocksource will work even without the real TSC page
544 * mapped.
545 */
546 tsc_msr.as_uint64 = hv_get_register(HV_REGISTER_REFERENCE_TSC);
547 if (hv_root_partition)
548 tsc_pfn = tsc_msr.pfn;
549 else
550 tsc_pfn = HVPFN_DOWN(virt_to_phys(tsc_page));
551 tsc_msr.enable = 1;
552 tsc_msr.pfn = tsc_pfn;
553 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr.as_uint64);
554
555 clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
556
557 hv_sched_clock_offset = hv_read_reference_counter();
558 hv_setup_sched_clock(read_hv_sched_clock_tsc);
559
560 return true;
561}
562
563void __init hv_init_clocksource(void)
564{
565 /*
566 * Try to set up the TSC page clocksource. If it succeeds, we're
567 * done. Otherwise, set up the MSR clocksource. At least one of
568 * these will always be available except on very old versions of
569 * Hyper-V on x86. In that case we won't have a Hyper-V
570 * clocksource, but Linux will still run with a clocksource based
571 * on the emulated PIT or LAPIC timer.
572 */
573 if (hv_init_tsc_clocksource())
574 return;
575
576 if (!(ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE))
577 return;
578
579 hv_read_reference_counter = read_hv_clock_msr;
580 clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
581
582 hv_sched_clock_offset = hv_read_reference_counter();
583 hv_setup_sched_clock(read_hv_sched_clock_msr);
584}
585
586void __init hv_remap_tsc_clocksource(void)
587{
588 if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
589 return;
590
591 if (!hv_root_partition) {
592 WARN(1, "%s: attempt to remap TSC page in guest partition\n",
593 __func__);
594 return;
595 }
596
597 tsc_page = memremap(tsc_pfn << HV_HYP_PAGE_SHIFT, sizeof(tsc_pg),
598 MEMREMAP_WB);
599 if (!tsc_page)
600 pr_err("Failed to remap Hyper-V TSC page.\n");
601}
1// SPDX-License-Identifier: GPL-2.0
2
3/*
4 * Clocksource driver for the synthetic counter and timers
5 * provided by the Hyper-V hypervisor to guest VMs, as described
6 * in the Hyper-V Top Level Functional Spec (TLFS). This driver
7 * is instruction set architecture independent.
8 *
9 * Copyright (C) 2019, Microsoft, Inc.
10 *
11 * Author: Michael Kelley <mikelley@microsoft.com>
12 */
13
14#include <linux/percpu.h>
15#include <linux/cpumask.h>
16#include <linux/clockchips.h>
17#include <linux/clocksource.h>
18#include <linux/sched_clock.h>
19#include <linux/mm.h>
20#include <linux/cpuhotplug.h>
21#include <linux/interrupt.h>
22#include <linux/irq.h>
23#include <linux/acpi.h>
24#include <clocksource/hyperv_timer.h>
25#include <asm/hyperv-tlfs.h>
26#include <asm/mshyperv.h>
27
28static struct clock_event_device __percpu *hv_clock_event;
29static u64 hv_sched_clock_offset __ro_after_init;
30
31/*
32 * If false, we're using the old mechanism for stimer0 interrupts
33 * where it sends a VMbus message when it expires. The old
34 * mechanism is used when running on older versions of Hyper-V
35 * that don't support Direct Mode. While Hyper-V provides
36 * four stimer's per CPU, Linux uses only stimer0.
37 *
38 * Because Direct Mode does not require processing a VMbus
39 * message, stimer interrupts can be enabled earlier in the
40 * process of booting a CPU, and consistent with when timer
41 * interrupts are enabled for other clocksource drivers.
42 * However, for legacy versions of Hyper-V when Direct Mode
43 * is not enabled, setting up stimer interrupts must be
44 * delayed until VMbus is initialized and can process the
45 * interrupt message.
46 */
47static bool direct_mode_enabled;
48
49static int stimer0_irq = -1;
50static int stimer0_message_sint;
51static DEFINE_PER_CPU(long, stimer0_evt);
52
53/*
54 * Common code for stimer0 interrupts coming via Direct Mode or
55 * as a VMbus message.
56 */
57void hv_stimer0_isr(void)
58{
59 struct clock_event_device *ce;
60
61 ce = this_cpu_ptr(hv_clock_event);
62 ce->event_handler(ce);
63}
64EXPORT_SYMBOL_GPL(hv_stimer0_isr);
65
66/*
67 * stimer0 interrupt handler for architectures that support
68 * per-cpu interrupts, which also implies Direct Mode.
69 */
70static irqreturn_t hv_stimer0_percpu_isr(int irq, void *dev_id)
71{
72 hv_stimer0_isr();
73 return IRQ_HANDLED;
74}
75
76static int hv_ce_set_next_event(unsigned long delta,
77 struct clock_event_device *evt)
78{
79 u64 current_tick;
80
81 current_tick = hv_read_reference_counter();
82 current_tick += delta;
83 hv_set_register(HV_REGISTER_STIMER0_COUNT, current_tick);
84 return 0;
85}
86
87static int hv_ce_shutdown(struct clock_event_device *evt)
88{
89 hv_set_register(HV_REGISTER_STIMER0_COUNT, 0);
90 hv_set_register(HV_REGISTER_STIMER0_CONFIG, 0);
91 if (direct_mode_enabled && stimer0_irq >= 0)
92 disable_percpu_irq(stimer0_irq);
93
94 return 0;
95}
96
97static int hv_ce_set_oneshot(struct clock_event_device *evt)
98{
99 union hv_stimer_config timer_cfg;
100
101 timer_cfg.as_uint64 = 0;
102 timer_cfg.enable = 1;
103 timer_cfg.auto_enable = 1;
104 if (direct_mode_enabled) {
105 /*
106 * When it expires, the timer will directly interrupt
107 * on the specified hardware vector/IRQ.
108 */
109 timer_cfg.direct_mode = 1;
110 timer_cfg.apic_vector = HYPERV_STIMER0_VECTOR;
111 if (stimer0_irq >= 0)
112 enable_percpu_irq(stimer0_irq, IRQ_TYPE_NONE);
113 } else {
114 /*
115 * When it expires, the timer will generate a VMbus message,
116 * to be handled by the normal VMbus interrupt handler.
117 */
118 timer_cfg.direct_mode = 0;
119 timer_cfg.sintx = stimer0_message_sint;
120 }
121 hv_set_register(HV_REGISTER_STIMER0_CONFIG, timer_cfg.as_uint64);
122 return 0;
123}
124
125/*
126 * hv_stimer_init - Per-cpu initialization of the clockevent
127 */
128static int hv_stimer_init(unsigned int cpu)
129{
130 struct clock_event_device *ce;
131
132 if (!hv_clock_event)
133 return 0;
134
135 ce = per_cpu_ptr(hv_clock_event, cpu);
136 ce->name = "Hyper-V clockevent";
137 ce->features = CLOCK_EVT_FEAT_ONESHOT;
138 ce->cpumask = cpumask_of(cpu);
139 ce->rating = 1000;
140 ce->set_state_shutdown = hv_ce_shutdown;
141 ce->set_state_oneshot = hv_ce_set_oneshot;
142 ce->set_next_event = hv_ce_set_next_event;
143
144 clockevents_config_and_register(ce,
145 HV_CLOCK_HZ,
146 HV_MIN_DELTA_TICKS,
147 HV_MAX_MAX_DELTA_TICKS);
148 return 0;
149}
150
151/*
152 * hv_stimer_cleanup - Per-cpu cleanup of the clockevent
153 */
154int hv_stimer_cleanup(unsigned int cpu)
155{
156 struct clock_event_device *ce;
157
158 if (!hv_clock_event)
159 return 0;
160
161 /*
162 * In the legacy case where Direct Mode is not enabled
163 * (which can only be on x86/64), stimer cleanup happens
164 * relatively early in the CPU offlining process. We
165 * must unbind the stimer-based clockevent device so
166 * that the LAPIC timer can take over until clockevents
167 * are no longer needed in the offlining process. Note
168 * that clockevents_unbind_device() eventually calls
169 * hv_ce_shutdown().
170 *
171 * The unbind should not be done when Direct Mode is
172 * enabled because we may be on an architecture where
173 * there are no other clockevent devices to fallback to.
174 */
175 ce = per_cpu_ptr(hv_clock_event, cpu);
176 if (direct_mode_enabled)
177 hv_ce_shutdown(ce);
178 else
179 clockevents_unbind_device(ce, cpu);
180
181 return 0;
182}
183EXPORT_SYMBOL_GPL(hv_stimer_cleanup);
184
185/*
186 * These placeholders are overridden by arch specific code on
187 * architectures that need special setup of the stimer0 IRQ because
188 * they don't support per-cpu IRQs (such as x86/x64).
189 */
190void __weak hv_setup_stimer0_handler(void (*handler)(void))
191{
192};
193
194void __weak hv_remove_stimer0_handler(void)
195{
196};
197
198/* Called only on architectures with per-cpu IRQs (i.e., not x86/x64) */
199static int hv_setup_stimer0_irq(void)
200{
201 int ret;
202
203 ret = acpi_register_gsi(NULL, HYPERV_STIMER0_VECTOR,
204 ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_HIGH);
205 if (ret < 0) {
206 pr_err("Can't register Hyper-V stimer0 GSI. Error %d", ret);
207 return ret;
208 }
209 stimer0_irq = ret;
210
211 ret = request_percpu_irq(stimer0_irq, hv_stimer0_percpu_isr,
212 "Hyper-V stimer0", &stimer0_evt);
213 if (ret) {
214 pr_err("Can't request Hyper-V stimer0 IRQ %d. Error %d",
215 stimer0_irq, ret);
216 acpi_unregister_gsi(stimer0_irq);
217 stimer0_irq = -1;
218 }
219 return ret;
220}
221
222static void hv_remove_stimer0_irq(void)
223{
224 if (stimer0_irq == -1) {
225 hv_remove_stimer0_handler();
226 } else {
227 free_percpu_irq(stimer0_irq, &stimer0_evt);
228 acpi_unregister_gsi(stimer0_irq);
229 stimer0_irq = -1;
230 }
231}
232
233/* hv_stimer_alloc - Global initialization of the clockevent and stimer0 */
234int hv_stimer_alloc(bool have_percpu_irqs)
235{
236 int ret;
237
238 /*
239 * Synthetic timers are always available except on old versions of
240 * Hyper-V on x86. In that case, return as error as Linux will use a
241 * clockevent based on emulated LAPIC timer hardware.
242 */
243 if (!(ms_hyperv.features & HV_MSR_SYNTIMER_AVAILABLE))
244 return -EINVAL;
245
246 hv_clock_event = alloc_percpu(struct clock_event_device);
247 if (!hv_clock_event)
248 return -ENOMEM;
249
250 direct_mode_enabled = ms_hyperv.misc_features &
251 HV_STIMER_DIRECT_MODE_AVAILABLE;
252
253 /*
254 * If Direct Mode isn't enabled, the remainder of the initialization
255 * is done later by hv_stimer_legacy_init()
256 */
257 if (!direct_mode_enabled)
258 return 0;
259
260 if (have_percpu_irqs) {
261 ret = hv_setup_stimer0_irq();
262 if (ret)
263 goto free_clock_event;
264 } else {
265 hv_setup_stimer0_handler(hv_stimer0_isr);
266 }
267
268 /*
269 * Since we are in Direct Mode, stimer initialization
270 * can be done now with a CPUHP value in the same range
271 * as other clockevent devices.
272 */
273 ret = cpuhp_setup_state(CPUHP_AP_HYPERV_TIMER_STARTING,
274 "clockevents/hyperv/stimer:starting",
275 hv_stimer_init, hv_stimer_cleanup);
276 if (ret < 0) {
277 hv_remove_stimer0_irq();
278 goto free_clock_event;
279 }
280 return ret;
281
282free_clock_event:
283 free_percpu(hv_clock_event);
284 hv_clock_event = NULL;
285 return ret;
286}
287EXPORT_SYMBOL_GPL(hv_stimer_alloc);
288
289/*
290 * hv_stimer_legacy_init -- Called from the VMbus driver to handle
291 * the case when Direct Mode is not enabled, and the stimer
292 * must be initialized late in the CPU onlining process.
293 *
294 */
295void hv_stimer_legacy_init(unsigned int cpu, int sint)
296{
297 if (direct_mode_enabled)
298 return;
299
300 /*
301 * This function gets called by each vCPU, so setting the
302 * global stimer_message_sint value each time is conceptually
303 * not ideal, but the value passed in is always the same and
304 * it avoids introducing yet another interface into this
305 * clocksource driver just to set the sint in the legacy case.
306 */
307 stimer0_message_sint = sint;
308 (void)hv_stimer_init(cpu);
309}
310EXPORT_SYMBOL_GPL(hv_stimer_legacy_init);
311
312/*
313 * hv_stimer_legacy_cleanup -- Called from the VMbus driver to
314 * handle the case when Direct Mode is not enabled, and the
315 * stimer must be cleaned up early in the CPU offlining
316 * process.
317 */
318void hv_stimer_legacy_cleanup(unsigned int cpu)
319{
320 if (direct_mode_enabled)
321 return;
322 (void)hv_stimer_cleanup(cpu);
323}
324EXPORT_SYMBOL_GPL(hv_stimer_legacy_cleanup);
325
326/*
327 * Do a global cleanup of clockevents for the cases of kexec and
328 * vmbus exit
329 */
330void hv_stimer_global_cleanup(void)
331{
332 int cpu;
333
334 /*
335 * hv_stime_legacy_cleanup() will stop the stimer if Direct
336 * Mode is not enabled, and fallback to the LAPIC timer.
337 */
338 for_each_present_cpu(cpu) {
339 hv_stimer_legacy_cleanup(cpu);
340 }
341
342 if (!hv_clock_event)
343 return;
344
345 if (direct_mode_enabled) {
346 cpuhp_remove_state(CPUHP_AP_HYPERV_TIMER_STARTING);
347 hv_remove_stimer0_irq();
348 stimer0_irq = -1;
349 }
350 free_percpu(hv_clock_event);
351 hv_clock_event = NULL;
352
353}
354EXPORT_SYMBOL_GPL(hv_stimer_global_cleanup);
355
356/*
357 * Code and definitions for the Hyper-V clocksources. Two
358 * clocksources are defined: one that reads the Hyper-V defined MSR, and
359 * the other that uses the TSC reference page feature as defined in the
360 * TLFS. The MSR version is for compatibility with old versions of
361 * Hyper-V and 32-bit x86. The TSC reference page version is preferred.
362 */
363
364u64 (*hv_read_reference_counter)(void);
365EXPORT_SYMBOL_GPL(hv_read_reference_counter);
366
367static union {
368 struct ms_hyperv_tsc_page page;
369 u8 reserved[PAGE_SIZE];
370} tsc_pg __aligned(PAGE_SIZE);
371
372struct ms_hyperv_tsc_page *hv_get_tsc_page(void)
373{
374 return &tsc_pg.page;
375}
376EXPORT_SYMBOL_GPL(hv_get_tsc_page);
377
378static u64 notrace read_hv_clock_tsc(void)
379{
380 u64 current_tick = hv_read_tsc_page(hv_get_tsc_page());
381
382 if (current_tick == U64_MAX)
383 current_tick = hv_get_register(HV_REGISTER_TIME_REF_COUNT);
384
385 return current_tick;
386}
387
388static u64 notrace read_hv_clock_tsc_cs(struct clocksource *arg)
389{
390 return read_hv_clock_tsc();
391}
392
393static u64 notrace read_hv_sched_clock_tsc(void)
394{
395 return (read_hv_clock_tsc() - hv_sched_clock_offset) *
396 (NSEC_PER_SEC / HV_CLOCK_HZ);
397}
398
399static void suspend_hv_clock_tsc(struct clocksource *arg)
400{
401 u64 tsc_msr;
402
403 /* Disable the TSC page */
404 tsc_msr = hv_get_register(HV_REGISTER_REFERENCE_TSC);
405 tsc_msr &= ~BIT_ULL(0);
406 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr);
407}
408
409
410static void resume_hv_clock_tsc(struct clocksource *arg)
411{
412 phys_addr_t phys_addr = virt_to_phys(&tsc_pg);
413 u64 tsc_msr;
414
415 /* Re-enable the TSC page */
416 tsc_msr = hv_get_register(HV_REGISTER_REFERENCE_TSC);
417 tsc_msr &= GENMASK_ULL(11, 0);
418 tsc_msr |= BIT_ULL(0) | (u64)phys_addr;
419 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr);
420}
421
422#ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
423static int hv_cs_enable(struct clocksource *cs)
424{
425 vclocks_set_used(VDSO_CLOCKMODE_HVCLOCK);
426 return 0;
427}
428#endif
429
430static struct clocksource hyperv_cs_tsc = {
431 .name = "hyperv_clocksource_tsc_page",
432 .rating = 500,
433 .read = read_hv_clock_tsc_cs,
434 .mask = CLOCKSOURCE_MASK(64),
435 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
436 .suspend= suspend_hv_clock_tsc,
437 .resume = resume_hv_clock_tsc,
438#ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK
439 .enable = hv_cs_enable,
440 .vdso_clock_mode = VDSO_CLOCKMODE_HVCLOCK,
441#else
442 .vdso_clock_mode = VDSO_CLOCKMODE_NONE,
443#endif
444};
445
446static u64 notrace read_hv_clock_msr(void)
447{
448 /*
449 * Read the partition counter to get the current tick count. This count
450 * is set to 0 when the partition is created and is incremented in
451 * 100 nanosecond units.
452 */
453 return hv_get_register(HV_REGISTER_TIME_REF_COUNT);
454}
455
456static u64 notrace read_hv_clock_msr_cs(struct clocksource *arg)
457{
458 return read_hv_clock_msr();
459}
460
461static u64 notrace read_hv_sched_clock_msr(void)
462{
463 return (read_hv_clock_msr() - hv_sched_clock_offset) *
464 (NSEC_PER_SEC / HV_CLOCK_HZ);
465}
466
467static struct clocksource hyperv_cs_msr = {
468 .name = "hyperv_clocksource_msr",
469 .rating = 500,
470 .read = read_hv_clock_msr_cs,
471 .mask = CLOCKSOURCE_MASK(64),
472 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
473};
474
475/*
476 * Reference to pv_ops must be inline so objtool
477 * detection of noinstr violations can work correctly.
478 */
479#ifdef CONFIG_GENERIC_SCHED_CLOCK
480static __always_inline void hv_setup_sched_clock(void *sched_clock)
481{
482 /*
483 * We're on an architecture with generic sched clock (not x86/x64).
484 * The Hyper-V sched clock read function returns nanoseconds, not
485 * the normal 100ns units of the Hyper-V synthetic clock.
486 */
487 sched_clock_register(sched_clock, 64, NSEC_PER_SEC);
488}
489#elif defined CONFIG_PARAVIRT
490static __always_inline void hv_setup_sched_clock(void *sched_clock)
491{
492 /* We're on x86/x64 *and* using PV ops */
493 paravirt_set_sched_clock(sched_clock);
494}
495#else /* !CONFIG_GENERIC_SCHED_CLOCK && !CONFIG_PARAVIRT */
496static __always_inline void hv_setup_sched_clock(void *sched_clock) {}
497#endif /* CONFIG_GENERIC_SCHED_CLOCK */
498
499static bool __init hv_init_tsc_clocksource(void)
500{
501 u64 tsc_msr;
502 phys_addr_t phys_addr;
503
504 if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE))
505 return false;
506
507 if (hv_root_partition)
508 return false;
509
510 /*
511 * If Hyper-V offers TSC_INVARIANT, then the virtualized TSC correctly
512 * handles frequency and offset changes due to live migration,
513 * pause/resume, and other VM management operations. So lower the
514 * Hyper-V Reference TSC rating, causing the generic TSC to be used.
515 * TSC_INVARIANT is not offered on ARM64, so the Hyper-V Reference
516 * TSC will be preferred over the virtualized ARM64 arch counter.
517 * While the Hyper-V MSR clocksource won't be used since the
518 * Reference TSC clocksource is present, change its rating as
519 * well for consistency.
520 */
521 if (ms_hyperv.features & HV_ACCESS_TSC_INVARIANT) {
522 hyperv_cs_tsc.rating = 250;
523 hyperv_cs_msr.rating = 250;
524 }
525
526 hv_read_reference_counter = read_hv_clock_tsc;
527 phys_addr = virt_to_phys(hv_get_tsc_page());
528
529 /*
530 * The Hyper-V TLFS specifies to preserve the value of reserved
531 * bits in registers. So read the existing value, preserve the
532 * low order 12 bits, and add in the guest physical address
533 * (which already has at least the low 12 bits set to zero since
534 * it is page aligned). Also set the "enable" bit, which is bit 0.
535 */
536 tsc_msr = hv_get_register(HV_REGISTER_REFERENCE_TSC);
537 tsc_msr &= GENMASK_ULL(11, 0);
538 tsc_msr = tsc_msr | 0x1 | (u64)phys_addr;
539 hv_set_register(HV_REGISTER_REFERENCE_TSC, tsc_msr);
540
541 clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100);
542
543 hv_sched_clock_offset = hv_read_reference_counter();
544 hv_setup_sched_clock(read_hv_sched_clock_tsc);
545
546 return true;
547}
548
549void __init hv_init_clocksource(void)
550{
551 /*
552 * Try to set up the TSC page clocksource. If it succeeds, we're
553 * done. Otherwise, set up the MSR clocksource. At least one of
554 * these will always be available except on very old versions of
555 * Hyper-V on x86. In that case we won't have a Hyper-V
556 * clocksource, but Linux will still run with a clocksource based
557 * on the emulated PIT or LAPIC timer.
558 */
559 if (hv_init_tsc_clocksource())
560 return;
561
562 if (!(ms_hyperv.features & HV_MSR_TIME_REF_COUNT_AVAILABLE))
563 return;
564
565 hv_read_reference_counter = read_hv_clock_msr;
566 clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100);
567
568 hv_sched_clock_offset = hv_read_reference_counter();
569 hv_setup_sched_clock(read_hv_sched_clock_msr);
570}
571EXPORT_SYMBOL_GPL(hv_init_clocksource);