Loading...
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2005-2008 Cavium Networks, Inc
7 */
8#ifndef __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
9#define __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
10
11#define CP0_CVMCTL_REG $9, 7
12#define CP0_CVMMEMCTL_REG $11,7
13#define CP0_PRID_REG $15, 0
14#define CP0_DCACHE_ERR_REG $27, 1
15#define CP0_PRID_OCTEON_PASS1 0x000d0000
16#define CP0_PRID_OCTEON_CN30XX 0x000d0200
17
18.macro kernel_entry_setup
19 # Registers set by bootloader:
20 # (only 32 bits set by bootloader, all addresses are physical
21 # addresses, and need to have the appropriate memory region set
22 # by the kernel
23 # a0 = argc
24 # a1 = argv (kseg0 compat addr)
25 # a2 = 1 if init core, zero otherwise
26 # a3 = address of boot descriptor block
27 .set push
28 .set arch=octeon
29 # Read the cavium mem control register
30 dmfc0 v0, CP0_CVMMEMCTL_REG
31 # Clear the lower 6 bits, the CVMSEG size
32 dins v0, $0, 0, 6
33 ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
34 dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register
35 dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register
36 # Disable unaligned load/store support but leave HW fixup enabled
37 # Needed for octeon specific memcpy
38 or v0, v0, 0x5001
39 xor v0, v0, 0x1001
40 # First clear off CvmCtl[IPPCI] bit and move the performance
41 # counters interrupt to IRQ 6
42 dli v1, ~(7 << 7)
43 and v0, v0, v1
44 ori v0, v0, (6 << 7)
45
46 mfc0 v1, CP0_PRID_REG
47 and t1, v1, 0xfff8
48 xor t1, t1, 0x9000 # 63-P1
49 beqz t1, 4f
50 and t1, v1, 0xfff8
51 xor t1, t1, 0x9008 # 63-P2
52 beqz t1, 4f
53 and t1, v1, 0xfff8
54 xor t1, t1, 0x9100 # 68-P1
55 beqz t1, 4f
56 and t1, v1, 0xff00
57 xor t1, t1, 0x9200 # 66-PX
58 bnez t1, 5f # Skip WAR for others.
59 and t1, v1, 0x00ff
60 slti t1, t1, 2 # 66-P1.2 and later good.
61 beqz t1, 5f
62
634: # core-16057 work around
64 or v0, v0, 0x2000 # Set IPREF bit.
65
665: # No core-16057 work around
67 # Write the cavium control register
68 dmtc0 v0, CP0_CVMCTL_REG
69 sync
70 # Flush dcache after config change
71 cache 9, 0($0)
72 # Zero all of CVMSEG to make sure parity is correct
73 dli v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
74 dsll v0, 7
75 beqz v0, 2f
761: dsubu v0, 8
77 sd $0, -32768(v0)
78 bnez v0, 1b
792:
80 mfc0 v0, CP0_PRID_REG
81 bbit0 v0, 15, 1f
82 # OCTEON II or better have bit 15 set. Clear the error bits.
83 and t1, v0, 0xff00
84 dli v0, 0x9500
85 bge t1, v0, 1f # OCTEON III has no DCACHE_ERR_REG COP0
86 dli v0, 0x27
87 dmtc0 v0, CP0_DCACHE_ERR_REG
881:
89 # Get my core id
90 rdhwr v0, $0
91 # Jump the master to kernel_entry
92 bne a2, zero, octeon_main_processor
93 nop
94
95#ifdef CONFIG_SMP
96
97 #
98 # All cores other than the master need to wait here for SMP bootstrap
99 # to begin
100 #
101
102octeon_spin_wait_boot:
103#ifdef CONFIG_RELOCATABLE
104 PTR_LA t0, octeon_processor_relocated_kernel_entry
105 LONG_L t0, (t0)
106 beq zero, t0, 1f
107 nop
108
109 jr t0
110 nop
1111:
112#endif /* CONFIG_RELOCATABLE */
113
114 # This is the variable where the next core to boot is stored
115 PTR_LA t0, octeon_processor_boot
116 # Get the core id of the next to be booted
117 LONG_L t1, (t0)
118 # Keep looping if it isn't me
119 bne t1, v0, octeon_spin_wait_boot
120 nop
121 # Get my GP from the global variable
122 PTR_LA t0, octeon_processor_gp
123 LONG_L gp, (t0)
124 # Get my SP from the global variable
125 PTR_LA t0, octeon_processor_sp
126 LONG_L sp, (t0)
127 # Set the SP global variable to zero so the master knows we've started
128 LONG_S zero, (t0)
129#ifdef __OCTEON__
130 syncw
131 syncw
132#else
133 sync
134#endif
135 # Jump to the normal Linux SMP entry point
136 j smp_bootstrap
137 nop
138#else /* CONFIG_SMP */
139
140 #
141 # Someone tried to boot SMP with a non SMP kernel. All extra cores
142 # will halt here.
143 #
144octeon_wait_forever:
145 wait
146 b octeon_wait_forever
147 nop
148
149#endif /* CONFIG_SMP */
150octeon_main_processor:
151 .set pop
152.endm
153
154/*
155 * Do SMP slave processor setup necessary before we can safely execute C code.
156 */
157 .macro smp_slave_setup
158 .endm
159
160#define USE_KEXEC_SMP_WAIT_FINAL
161 .macro kexec_smp_wait_final
162 .set push
163 .set noreorder
164 synci 0($0)
165 .set pop
166 .endm
167
168#endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2005-2008 Cavium Networks, Inc
7 */
8#ifndef __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
9#define __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
10
11#define CP0_CVMCTL_REG $9, 7
12#define CP0_CVMMEMCTL_REG $11,7
13#define CP0_PRID_REG $15, 0
14#define CP0_DCACHE_ERR_REG $27, 1
15#define CP0_PRID_OCTEON_PASS1 0x000d0000
16#define CP0_PRID_OCTEON_CN30XX 0x000d0200
17
18.macro kernel_entry_setup
19 # Registers set by bootloader:
20 # (only 32 bits set by bootloader, all addresses are physical
21 # addresses, and need to have the appropriate memory region set
22 # by the kernel
23 # a0 = argc
24 # a1 = argv (kseg0 compat addr)
25 # a2 = 1 if init core, zero otherwise
26 # a3 = address of boot descriptor block
27 .set push
28 .set arch=octeon
29 # Read the cavium mem control register
30 dmfc0 v0, CP0_CVMMEMCTL_REG
31 # Clear the lower 6 bits, the CVMSEG size
32 dins v0, $0, 0, 6
33 ori v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
34 dmtc0 v0, CP0_CVMMEMCTL_REG # Write the cavium mem control register
35 dmfc0 v0, CP0_CVMCTL_REG # Read the cavium control register
36 # Disable unaligned load/store support but leave HW fixup enabled
37 # Needed for octeon specific memcpy
38 or v0, v0, 0x5001
39 xor v0, v0, 0x1001
40 # First clear off CvmCtl[IPPCI] bit and move the performance
41 # counters interrupt to IRQ 6
42 dli v1, ~(7 << 7)
43 and v0, v0, v1
44 ori v0, v0, (6 << 7)
45
46 mfc0 v1, CP0_PRID_REG
47 and t1, v1, 0xfff8
48 xor t1, t1, 0x9000 # 63-P1
49 beqz t1, 4f
50 and t1, v1, 0xfff8
51 xor t1, t1, 0x9008 # 63-P2
52 beqz t1, 4f
53 and t1, v1, 0xfff8
54 xor t1, t1, 0x9100 # 68-P1
55 beqz t1, 4f
56 and t1, v1, 0xff00
57 xor t1, t1, 0x9200 # 66-PX
58 bnez t1, 5f # Skip WAR for others.
59 and t1, v1, 0x00ff
60 slti t1, t1, 2 # 66-P1.2 and later good.
61 beqz t1, 5f
62
634: # core-16057 work around
64 or v0, v0, 0x2000 # Set IPREF bit.
65
665: # No core-16057 work around
67 # Write the cavium control register
68 dmtc0 v0, CP0_CVMCTL_REG
69 sync
70 # Flush dcache after config change
71 cache 9, 0($0)
72 # Zero all of CVMSEG to make sure parity is correct
73 dli v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
74 dsll v0, 7
75 beqz v0, 2f
761: dsubu v0, 8
77 sd $0, -32768(v0)
78 bnez v0, 1b
792:
80 mfc0 v0, CP0_PRID_REG
81 bbit0 v0, 15, 1f
82 # OCTEON II or better have bit 15 set. Clear the error bits.
83 and t1, v0, 0xff00
84 dli v0, 0x9500
85 bge t1, v0, 1f # OCTEON III has no DCACHE_ERR_REG COP0
86 dli v0, 0x27
87 dmtc0 v0, CP0_DCACHE_ERR_REG
881:
89 # Get my core id
90 rdhwr v0, $0
91 # Jump the master to kernel_entry
92 bne a2, zero, octeon_main_processor
93 nop
94
95#ifdef CONFIG_SMP
96
97 #
98 # All cores other than the master need to wait here for SMP bootstrap
99 # to begin
100 #
101
102octeon_spin_wait_boot:
103#ifdef CONFIG_RELOCATABLE
104 PTR_LA t0, octeon_processor_relocated_kernel_entry
105 LONG_L t0, (t0)
106 beq zero, t0, 1f
107 nop
108
109 jr t0
110 nop
1111:
112#endif /* CONFIG_RELOCATABLE */
113
114 # This is the variable where the next core to boot is stored
115 PTR_LA t0, octeon_processor_boot
116 # Get the core id of the next to be booted
117 LONG_L t1, (t0)
118 # Keep looping if it isn't me
119 bne t1, v0, octeon_spin_wait_boot
120 nop
121 # Get my GP from the global variable
122 PTR_LA t0, octeon_processor_gp
123 LONG_L gp, (t0)
124 # Get my SP from the global variable
125 PTR_LA t0, octeon_processor_sp
126 LONG_L sp, (t0)
127 # Set the SP global variable to zero so the master knows we've started
128 LONG_S zero, (t0)
129#ifdef __OCTEON__
130 syncw
131 syncw
132#else
133 sync
134#endif
135 # Jump to the normal Linux SMP entry point
136 j smp_bootstrap
137 nop
138#else /* CONFIG_SMP */
139
140 #
141 # Someone tried to boot SMP with a non SMP kernel. All extra cores
142 # will halt here.
143 #
144octeon_wait_forever:
145 wait
146 b octeon_wait_forever
147 nop
148
149#endif /* CONFIG_SMP */
150octeon_main_processor:
151 .set pop
152.endm
153
154/*
155 * Do SMP slave processor setup necessary before we can safely execute C code.
156 */
157 .macro smp_slave_setup
158 .endm
159
160#define USE_KEXEC_SMP_WAIT_FINAL
161 .macro kexec_smp_wait_final
162 .set push
163 .set noreorder
164 synci 0($0)
165 .set pop
166 .endm
167
168#endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */