Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2config SND_SOC_TEGRA
3 tristate "SoC Audio for the Tegra System-on-Chip"
4 depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
5 depends on COMMON_CLK
6 depends on RESET_CONTROLLER
7 select REGMAP_MMIO
8 select SND_SOC_GENERIC_DMAENGINE_PCM
9 help
10 Say Y or M here if you want support for SoC audio on Tegra.
11
12if SND_SOC_TEGRA
13
14config SND_SOC_TEGRA20_AC97
15 tristate "Tegra20 AC97 interface"
16 select SND_SOC_AC97_BUS
17 select SND_SOC_TEGRA20_DAS
18 help
19 Say Y or M if you want to add support for codecs attached to the
20 Tegra20 AC97 interface. You will also need to select the individual
21 machine drivers to support below.
22
23config SND_SOC_TEGRA20_DAS
24 tristate "Tegra20 DAS module"
25 help
26 Say Y or M if you want to add support for the Tegra20 DAS module.
27 You will also need to select the individual machine drivers to
28 support below.
29
30config SND_SOC_TEGRA20_I2S
31 tristate "Tegra20 I2S interface"
32 select SND_SOC_TEGRA20_DAS
33 help
34 Say Y or M if you want to add support for codecs attached to the
35 Tegra20 I2S interface. You will also need to select the individual
36 machine drivers to support below.
37
38config SND_SOC_TEGRA20_SPDIF
39 tristate "Tegra20 SPDIF interface"
40 help
41 Say Y or M if you want to add support for the Tegra20 SPDIF interface.
42 You will also need to select the individual machine drivers to support
43 below.
44
45config SND_SOC_TEGRA30_AHUB
46 tristate "Tegra30 AHUB module"
47 help
48 Say Y or M if you want to add support for the Tegra30 AHUB module.
49 You will also need to select the individual machine drivers to
50 support below.
51
52config SND_SOC_TEGRA30_I2S
53 tristate "Tegra30 I2S interface"
54 select SND_SOC_TEGRA30_AHUB
55 help
56 Say Y or M if you want to add support for codecs attached to the
57 Tegra30 I2S interface. You will also need to select the individual
58 machine drivers to support below.
59
60config SND_SOC_TEGRA210_AHUB
61 tristate "Tegra210 AHUB module"
62 help
63 Config to enable Audio Hub (AHUB) module, which comprises of a
64 switch called Audio Crossbar (AXBAR) used to configure or modify
65 the audio routing path between various HW accelerators present in
66 AHUB.
67 Say Y or M if you want to add support for Tegra210 AHUB module.
68
69config SND_SOC_TEGRA210_DMIC
70 tristate "Tegra210 DMIC module"
71 help
72 Config to enable the Digital MIC (DMIC) controller which is used
73 to interface with Pulse Density Modulation (PDM) input devices.
74 The DMIC controller implements a converter to convert PDM signals
75 to Pulse Code Modulation (PCM) signals. This can be viewed as a
76 PDM receiver.
77 Say Y or M if you want to add support for Tegra210 DMIC module.
78
79config SND_SOC_TEGRA210_I2S
80 tristate "Tegra210 I2S module"
81 help
82 Config to enable the Inter-IC Sound (I2S) Controller which
83 implements full-duplex and bidirectional and single direction
84 point-to-point serial interfaces. It can interface with I2S
85 compatible devices.
86 Say Y or M if you want to add support for Tegra210 I2S module.
87
88config SND_SOC_TEGRA210_OPE
89 tristate "Tegra210 OPE module"
90 help
91 Config to enable the Output Processing Engine (OPE) which includes
92 Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor
93 (MBDRC) sub blocks for data processing. It can support up to 8
94 channels.
95 Say Y or M if you want to add support for Tegra210 OPE module.
96
97config SND_SOC_TEGRA186_ASRC
98 tristate "Tegra186 ASRC module"
99 help
100 Config to enable the Asynchronous Sample Rate Converter (ASRC),
101 which converts the sampling frequency of the input signal from
102 one frequency to another. It can handle over a wide range of
103 sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
104 ASRC has two modes of operation. One where ratio can be programmed
105 in SW and the other where it gets information from ratio estimator
106 module.
107 Say Y or M if you want to add support for Tegra186 ASRC module.
108
109config SND_SOC_TEGRA186_DSPK
110 tristate "Tegra186 DSPK module"
111 help
112 Config to enable the Digital Speaker Controller (DSPK) which
113 converts the multi-bit Pulse Code Modulation (PCM) audio input to
114 oversampled 1-bit Pulse Density Modulation (PDM) output. From the
115 signal flow perspective DSPK can be viewed as a PDM transmitter
116 that up-samples the input to the desired sampling rate by
117 interpolation and then converts the oversampled PCM input to
118 the desired 1-bit output via Delta Sigma Modulation (DSM).
119 Say Y or M if you want to add support for Tegra186 DSPK module.
120
121config SND_SOC_TEGRA210_ADMAIF
122 tristate "Tegra210 ADMAIF module"
123 help
124 Config to enable ADMAIF which is the interface between ADMA and
125 Audio Hub (AHUB). Each ADMA channel that sends/receives data to/
126 from AHUB must interface through an ADMAIF channel. ADMA channel
127 sending data to AHUB pairs with an ADMAIF Tx channel, where as
128 ADMA channel receiving data from AHUB pairs with an ADMAIF Rx
129 channel. Buffer size is configurable for each ADMAIIF channel.
130 Say Y or M if you want to add support for Tegra210 ADMAIF module.
131
132config SND_SOC_TEGRA210_MVC
133 tristate "Tegra210 MVC module"
134 help
135 Config to enable the digital Master Volume Controller (MVC) which
136 provides gain or attenuation to a digital signal path. It can be
137 used in input or output signal path. It can be used either for
138 per-stream volume control or for master volume control.
139 Say Y or M if you want to add support for Tegra210 MVC module.
140
141config SND_SOC_TEGRA210_SFC
142 tristate "Tegra210 SFC module"
143 help
144 Config to enable the Sampling Frequency Converter (SFC) which
145 converts the sampling frequency of input signal to another
146 frequency. It supports sampling frequency conversion of streams
147 upto 2 channels (stereo).
148 Say Y or M if you want to add support for Tegra210 SFC module.
149
150config SND_SOC_TEGRA210_AMX
151 tristate "Tegra210 AMX module"
152 help
153 Config to enable the Audio Multiplexer (AMX) which can multiplex
154 four input streams (each of up to 16 channels) and generate
155 output stream (of up to 16 channels). A byte RAM helps to form an
156 output frame by any combination of bytes from the input frames.
157 Say Y or M if you want to add support for Tegra210 AMX module.
158
159config SND_SOC_TEGRA210_ADX
160 tristate "Tegra210 ADX module"
161 help
162 Config to enable the Audio Demultiplexer (ADX) which takes an
163 input stream (up to 16 channels) and demultiplexes it into four
164 output streams (each of up to 16 channels). A byte RAM helps to
165 form output frames by any combination of bytes from the input
166 frame. Its design is identical to that of byte RAM in the AMX
167 except that the data flow direction is reversed.
168 Say Y or M if you want to add support for Tegra210 ADX module.
169
170config SND_SOC_TEGRA210_MIXER
171 tristate "Tegra210 Mixer module"
172 help
173 Config to enable the Mixer module which can help to mix multiple
174 audio streams. It supports mixing of upto 10 input streams,
175 where each stream can contain maximum of 8 channels. It supports
176 5 output each of which can be a mix of any combination of 10
177 input streams.
178 Say Y or M if you want to add support for Tegra210 Mixer module.
179
180config SND_SOC_TEGRA_AUDIO_GRAPH_CARD
181 tristate "Audio Graph Card based Tegra driver"
182 depends on SND_AUDIO_GRAPH_CARD
183 help
184 Config to enable Tegra audio machine driver based on generic
185 audio graph driver. It is a thin driver written to customize
186 few things for Tegra audio. Most of the code is re-used from
187 audio graph driver and the same DT bindings are used.
188
189config SND_SOC_TEGRA_MACHINE_DRV
190 tristate
191
192config SND_SOC_TEGRA_RT5640
193 tristate "SoC Audio support for Tegra boards using an RT5640 codec"
194 depends on I2C && GPIOLIB
195 select SND_SOC_TEGRA_MACHINE_DRV
196 select SND_SOC_RT5640
197 help
198 Say Y or M here if you want to add support for SoC audio on Tegra
199 boards using the RT5640 codec, such as Dalmore.
200
201config SND_SOC_TEGRA_WM8753
202 tristate "SoC Audio support for Tegra boards using a WM8753 codec"
203 depends on I2C && GPIOLIB
204 select SND_SOC_TEGRA_MACHINE_DRV
205 select SND_SOC_WM8753
206 help
207 Say Y or M here if you want to add support for SoC audio on Tegra
208 boards using the WM8753 codec, such as Whistler.
209
210config SND_SOC_TEGRA_WM8903
211 tristate "SoC Audio support for Tegra boards using a WM8903 codec"
212 depends on I2C && GPIOLIB
213 select SND_SOC_TEGRA_MACHINE_DRV
214 select SND_SOC_WM8903
215 help
216 Say Y or M here if you want to add support for SoC audio on Tegra
217 boards using the WM8093 codec. Currently, the supported boards are
218 Harmony, Ventana, Seaboard, Kaen, and Aebl.
219
220config SND_SOC_TEGRA_WM9712
221 tristate "SoC Audio support for Tegra boards using a WM9712 codec"
222 depends on GPIOLIB
223 select SND_SOC_TEGRA_MACHINE_DRV
224 select SND_SOC_TEGRA20_AC97
225 select SND_SOC_WM9712
226 help
227 Say Y or M here if you want to add support for SoC audio on Tegra
228 boards using the WM9712 (or compatible) codec.
229
230config SND_SOC_TEGRA_TRIMSLICE
231 tristate "SoC Audio support for TrimSlice board"
232 depends on I2C
233 select SND_SOC_TEGRA_MACHINE_DRV
234 select SND_SOC_TLV320AIC23_I2C
235 help
236 Say Y or M here if you want to add support for SoC audio on the
237 TrimSlice platform.
238
239config SND_SOC_TEGRA_ALC5632
240 tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
241 depends on I2C && GPIOLIB
242 select SND_SOC_TEGRA_MACHINE_DRV
243 select SND_SOC_ALC5632
244 help
245 Say Y or M here if you want to add support for SoC audio on the
246 Toshiba AC100 netbook.
247
248config SND_SOC_TEGRA_MAX98090
249 tristate "SoC Audio support for Tegra boards using a MAX98090 codec"
250 depends on I2C && GPIOLIB
251 select SND_SOC_TEGRA_MACHINE_DRV
252 select SND_SOC_MAX98090
253 help
254 Say Y or M here if you want to add support for SoC audio on Tegra
255 boards using the MAX98090 codec, such as Venice2.
256
257config SND_SOC_TEGRA_RT5677
258 tristate "SoC Audio support for Tegra boards using a RT5677 codec"
259 depends on I2C && GPIOLIB
260 select SND_SOC_TEGRA_MACHINE_DRV
261 select SND_SOC_RT5677
262 help
263 Say Y or M here if you want to add support for SoC audio on Tegra
264 boards using the RT5677 codec, such as Ryu.
265
266config SND_SOC_TEGRA_SGTL5000
267 tristate "SoC Audio support for Tegra boards using a SGTL5000 codec"
268 depends on I2C && GPIOLIB
269 select SND_SOC_TEGRA_MACHINE_DRV
270 select SND_SOC_SGTL5000
271 help
272 Say Y or M here if you want to add support for SoC audio on Tegra
273 boards using the SGTL5000 codec, such as Apalis T30, Apalis TK1 or
274 Colibri T30.
275
276endif
1config SND_SOC_TEGRA
2 tristate "SoC Audio for the Tegra System-on-Chip"
3 depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
4 depends on COMMON_CLK
5 depends on RESET_CONTROLLER
6 select REGMAP_MMIO
7 select SND_SOC_GENERIC_DMAENGINE_PCM
8 help
9 Say Y or M here if you want support for SoC audio on Tegra.
10
11config SND_SOC_TEGRA20_AC97
12 tristate
13 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
14 select SND_SOC_AC97_BUS
15 select SND_SOC_TEGRA20_DAS
16 help
17 Say Y or M if you want to add support for codecs attached to the
18 Tegra20 AC97 interface. You will also need to select the individual
19 machine drivers to support below.
20
21config SND_SOC_TEGRA20_DAS
22 tristate
23 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
24 help
25 Say Y or M if you want to add support for the Tegra20 DAS module.
26 You will also need to select the individual machine drivers to
27 support below.
28
29config SND_SOC_TEGRA20_I2S
30 tristate
31 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
32 select SND_SOC_TEGRA20_DAS
33 help
34 Say Y or M if you want to add support for codecs attached to the
35 Tegra20 I2S interface. You will also need to select the individual
36 machine drivers to support below.
37
38config SND_SOC_TEGRA20_SPDIF
39 tristate
40 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
41 default m
42 help
43 Say Y or M if you want to add support for the Tegra20 SPDIF interface.
44 You will also need to select the individual machine drivers to support
45 below.
46
47config SND_SOC_TEGRA30_AHUB
48 tristate
49 depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
50 help
51 Say Y or M if you want to add support for the Tegra20 AHUB module.
52 You will also need to select the individual machine drivers to
53 support below.
54
55config SND_SOC_TEGRA30_I2S
56 tristate
57 depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
58 select SND_SOC_TEGRA30_AHUB
59 help
60 Say Y or M if you want to add support for codecs attached to the
61 Tegra30 I2S interface. You will also need to select the individual
62 machine drivers to support below.
63
64config SND_SOC_TEGRA_RT5640
65 tristate "SoC Audio support for Tegra boards using an RT5640 codec"
66 depends on SND_SOC_TEGRA && I2C && GPIOLIB
67 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
68 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
69 select SND_SOC_RT5640
70 help
71 Say Y or M here if you want to add support for SoC audio on Tegra
72 boards using the RT5640 codec, such as Dalmore.
73
74config SND_SOC_TEGRA_WM8753
75 tristate "SoC Audio support for Tegra boards using a WM8753 codec"
76 depends on SND_SOC_TEGRA && I2C && GPIOLIB
77 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
78 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
79 select SND_SOC_WM8753
80 help
81 Say Y or M here if you want to add support for SoC audio on Tegra
82 boards using the WM8753 codec, such as Whistler.
83
84config SND_SOC_TEGRA_WM8903
85 tristate "SoC Audio support for Tegra boards using a WM8903 codec"
86 depends on SND_SOC_TEGRA && I2C && GPIOLIB
87 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
88 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
89 select SND_SOC_WM8903
90 help
91 Say Y or M here if you want to add support for SoC audio on Tegra
92 boards using the WM8093 codec. Currently, the supported boards are
93 Harmony, Ventana, Seaboard, Kaen, and Aebl.
94
95config SND_SOC_TEGRA_WM9712
96 tristate "SoC Audio support for Tegra boards using a WM9712 codec"
97 depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC && GPIOLIB
98 select SND_SOC_TEGRA20_AC97
99 select SND_SOC_WM9712
100 help
101 Say Y or M here if you want to add support for SoC audio on Tegra
102 boards using the WM9712 (or compatible) codec.
103
104config SND_SOC_TEGRA_TRIMSLICE
105 tristate "SoC Audio support for TrimSlice board"
106 depends on SND_SOC_TEGRA && I2C
107 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
108 select SND_SOC_TLV320AIC23_I2C
109 help
110 Say Y or M here if you want to add support for SoC audio on the
111 TrimSlice platform.
112
113config SND_SOC_TEGRA_ALC5632
114 tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
115 depends on SND_SOC_TEGRA && I2C && GPIOLIB
116 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
117 select SND_SOC_ALC5632
118 help
119 Say Y or M here if you want to add support for SoC audio on the
120 Toshiba AC100 netbook.
121
122config SND_SOC_TEGRA_MAX98090
123 tristate "SoC Audio support for Tegra boards using a MAX98090 codec"
124 depends on SND_SOC_TEGRA && I2C && GPIOLIB
125 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
126 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
127 select SND_SOC_MAX98090
128 help
129 Say Y or M here if you want to add support for SoC audio on Tegra
130 boards using the MAX98090 codec, such as Venice2.
131
132config SND_SOC_TEGRA_RT5677
133 tristate "SoC Audio support for Tegra boards using a RT5677 codec"
134 depends on SND_SOC_TEGRA && I2C && GPIOLIB
135 select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
136 select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
137 select SND_SOC_RT5677
138 help
139 Say Y or M here if you want to add support for SoC audio on Tegra
140 boards using the RT5677 codec, such as Ryu.