Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef SCSI_TRANSPORT_SAS_H
3#define SCSI_TRANSPORT_SAS_H
4
5#include <linux/transport_class.h>
6#include <linux/types.h>
7#include <linux/mutex.h>
8#include <scsi/sas.h>
9#include <linux/bsg-lib.h>
10
11struct scsi_transport_template;
12struct sas_rphy;
13struct request;
14
15#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
16static inline int scsi_is_sas_rphy(const struct device *sdev)
17{
18 return 0;
19}
20#else
21extern int scsi_is_sas_rphy(const struct device *);
22#endif
23
24static inline int sas_protocol_ata(enum sas_protocol proto)
25{
26 return ((proto & SAS_PROTOCOL_SATA) ||
27 (proto & SAS_PROTOCOL_STP))? 1 : 0;
28}
29
30enum sas_linkrate {
31 /* These Values are defined in the SAS standard */
32 SAS_LINK_RATE_UNKNOWN = 0,
33 SAS_PHY_DISABLED = 1,
34 SAS_PHY_RESET_PROBLEM = 2,
35 SAS_SATA_SPINUP_HOLD = 3,
36 SAS_SATA_PORT_SELECTOR = 4,
37 SAS_PHY_RESET_IN_PROGRESS = 5,
38 SAS_LINK_RATE_1_5_GBPS = 8,
39 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
40 SAS_LINK_RATE_3_0_GBPS = 9,
41 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
42 SAS_LINK_RATE_6_0_GBPS = 10,
43 SAS_LINK_RATE_12_0_GBPS = 11,
44 SAS_LINK_RATE_22_5_GBPS = 12,
45 /* These are virtual to the transport class and may never
46 * be signalled normally since the standard defined field
47 * is only 4 bits */
48 SAS_LINK_RATE_FAILED = 0x10,
49 SAS_PHY_VIRTUAL = 0x11,
50};
51
52struct sas_identify {
53 enum sas_device_type device_type;
54 enum sas_protocol initiator_port_protocols;
55 enum sas_protocol target_port_protocols;
56 u64 sas_address;
57 u8 phy_identifier;
58};
59
60struct sas_phy {
61 struct device dev;
62 int number;
63 int enabled;
64
65 /* phy identification */
66 struct sas_identify identify;
67
68 /* phy attributes */
69 enum sas_linkrate negotiated_linkrate;
70 enum sas_linkrate minimum_linkrate_hw;
71 enum sas_linkrate minimum_linkrate;
72 enum sas_linkrate maximum_linkrate_hw;
73 enum sas_linkrate maximum_linkrate;
74
75 /* link error statistics */
76 u32 invalid_dword_count;
77 u32 running_disparity_error_count;
78 u32 loss_of_dword_sync_count;
79 u32 phy_reset_problem_count;
80
81 /* for the list of phys belonging to a port */
82 struct list_head port_siblings;
83
84 /* available to the lldd */
85 void *hostdata;
86};
87
88#define dev_to_phy(d) \
89 container_of((d), struct sas_phy, dev)
90#define transport_class_to_phy(dev) \
91 dev_to_phy((dev)->parent)
92#define phy_to_shost(phy) \
93 dev_to_shost((phy)->dev.parent)
94
95struct request_queue;
96struct sas_rphy {
97 struct device dev;
98 struct sas_identify identify;
99 struct list_head list;
100 struct request_queue *q;
101 u32 scsi_target_id;
102};
103
104#define dev_to_rphy(d) \
105 container_of((d), struct sas_rphy, dev)
106#define transport_class_to_rphy(dev) \
107 dev_to_rphy((dev)->parent)
108#define rphy_to_shost(rphy) \
109 dev_to_shost((rphy)->dev.parent)
110#define target_to_rphy(targ) \
111 dev_to_rphy((targ)->dev.parent)
112
113struct sas_end_device {
114 struct sas_rphy rphy;
115 /* flags */
116 unsigned ready_led_meaning:1;
117 unsigned tlr_supported:1;
118 unsigned tlr_enabled:1;
119 /* parameters */
120 u16 I_T_nexus_loss_timeout;
121 u16 initiator_response_timeout;
122};
123#define rphy_to_end_device(r) \
124 container_of((r), struct sas_end_device, rphy)
125
126struct sas_expander_device {
127 int level;
128 int next_port_id;
129
130 #define SAS_EXPANDER_VENDOR_ID_LEN 8
131 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
132 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
133 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
134 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
135 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
136 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
137 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
138 u16 component_id;
139 u8 component_revision_id;
140
141 struct sas_rphy rphy;
142
143};
144#define rphy_to_expander_device(r) \
145 container_of((r), struct sas_expander_device, rphy)
146
147struct sas_port {
148 struct device dev;
149
150 int port_identifier;
151 int num_phys;
152 /* port flags */
153 unsigned int is_backlink:1;
154
155 /* the other end of the link */
156 struct sas_rphy *rphy;
157
158 struct mutex phy_list_mutex;
159 struct list_head phy_list;
160 struct list_head del_list; /* libsas only */
161};
162
163#define dev_to_sas_port(d) \
164 container_of((d), struct sas_port, dev)
165#define transport_class_to_sas_port(dev) \
166 dev_to_sas_port((dev)->parent)
167
168struct sas_phy_linkrates {
169 enum sas_linkrate maximum_linkrate;
170 enum sas_linkrate minimum_linkrate;
171};
172
173/* The functions by which the transport class and the driver communicate */
174struct sas_function_template {
175 int (*get_linkerrors)(struct sas_phy *);
176 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
177 int (*get_bay_identifier)(struct sas_rphy *);
178 int (*phy_reset)(struct sas_phy *, int);
179 int (*phy_enable)(struct sas_phy *, int);
180 int (*phy_setup)(struct sas_phy *);
181 void (*phy_release)(struct sas_phy *);
182 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
183 void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
184 struct sas_rphy *);
185};
186
187
188void sas_remove_children(struct device *);
189extern void sas_remove_host(struct Scsi_Host *);
190
191extern struct sas_phy *sas_phy_alloc(struct device *, int);
192extern void sas_phy_free(struct sas_phy *);
193extern int sas_phy_add(struct sas_phy *);
194extern void sas_phy_delete(struct sas_phy *);
195extern int scsi_is_sas_phy(const struct device *);
196
197u64 sas_get_address(struct scsi_device *);
198unsigned int sas_tlr_supported(struct scsi_device *);
199unsigned int sas_is_tlr_enabled(struct scsi_device *);
200void sas_disable_tlr(struct scsi_device *);
201void sas_enable_tlr(struct scsi_device *);
202
203extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
204extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
205void sas_rphy_free(struct sas_rphy *);
206extern int sas_rphy_add(struct sas_rphy *);
207extern void sas_rphy_remove(struct sas_rphy *);
208extern void sas_rphy_delete(struct sas_rphy *);
209extern void sas_rphy_unlink(struct sas_rphy *);
210
211struct sas_port *sas_port_alloc(struct device *, int);
212struct sas_port *sas_port_alloc_num(struct device *);
213int sas_port_add(struct sas_port *);
214void sas_port_free(struct sas_port *);
215void sas_port_delete(struct sas_port *);
216void sas_port_add_phy(struct sas_port *, struct sas_phy *);
217void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
218void sas_port_mark_backlink(struct sas_port *);
219int scsi_is_sas_port(const struct device *);
220struct sas_phy *sas_port_get_phy(struct sas_port *port);
221static inline void sas_port_put_phy(struct sas_phy *phy)
222{
223 if (phy)
224 put_device(&phy->dev);
225}
226
227extern struct scsi_transport_template *
228sas_attach_transport(struct sas_function_template *);
229extern void sas_release_transport(struct scsi_transport_template *);
230int sas_read_port_mode_page(struct scsi_device *);
231
232static inline int
233scsi_is_sas_expander_device(struct device *dev)
234{
235 struct sas_rphy *rphy;
236 if (!scsi_is_sas_rphy(dev))
237 return 0;
238 rphy = dev_to_rphy(dev);
239 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
240 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
241}
242
243#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
244
245#endif /* SCSI_TRANSPORT_SAS_H */
1#ifndef SCSI_TRANSPORT_SAS_H
2#define SCSI_TRANSPORT_SAS_H
3
4#include <linux/transport_class.h>
5#include <linux/types.h>
6#include <linux/mutex.h>
7#include <scsi/sas.h>
8
9struct scsi_transport_template;
10struct sas_rphy;
11struct request;
12
13#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
14static inline int is_sas_attached(struct scsi_device *sdev)
15{
16 return 0;
17}
18#else
19extern int is_sas_attached(struct scsi_device *sdev);
20#endif
21
22static inline int sas_protocol_ata(enum sas_protocol proto)
23{
24 return ((proto & SAS_PROTOCOL_SATA) ||
25 (proto & SAS_PROTOCOL_STP))? 1 : 0;
26}
27
28enum sas_linkrate {
29 /* These Values are defined in the SAS standard */
30 SAS_LINK_RATE_UNKNOWN = 0,
31 SAS_PHY_DISABLED = 1,
32 SAS_PHY_RESET_PROBLEM = 2,
33 SAS_SATA_SPINUP_HOLD = 3,
34 SAS_SATA_PORT_SELECTOR = 4,
35 SAS_PHY_RESET_IN_PROGRESS = 5,
36 SAS_LINK_RATE_1_5_GBPS = 8,
37 SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
38 SAS_LINK_RATE_3_0_GBPS = 9,
39 SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
40 SAS_LINK_RATE_6_0_GBPS = 10,
41 SAS_LINK_RATE_12_0_GBPS = 11,
42 /* These are virtual to the transport class and may never
43 * be signalled normally since the standard defined field
44 * is only 4 bits */
45 SAS_LINK_RATE_FAILED = 0x10,
46 SAS_PHY_VIRTUAL = 0x11,
47};
48
49struct sas_identify {
50 enum sas_device_type device_type;
51 enum sas_protocol initiator_port_protocols;
52 enum sas_protocol target_port_protocols;
53 u64 sas_address;
54 u8 phy_identifier;
55};
56
57struct sas_phy {
58 struct device dev;
59 int number;
60 int enabled;
61
62 /* phy identification */
63 struct sas_identify identify;
64
65 /* phy attributes */
66 enum sas_linkrate negotiated_linkrate;
67 enum sas_linkrate minimum_linkrate_hw;
68 enum sas_linkrate minimum_linkrate;
69 enum sas_linkrate maximum_linkrate_hw;
70 enum sas_linkrate maximum_linkrate;
71
72 /* link error statistics */
73 u32 invalid_dword_count;
74 u32 running_disparity_error_count;
75 u32 loss_of_dword_sync_count;
76 u32 phy_reset_problem_count;
77
78 /* for the list of phys belonging to a port */
79 struct list_head port_siblings;
80
81 /* available to the lldd */
82 void *hostdata;
83};
84
85#define dev_to_phy(d) \
86 container_of((d), struct sas_phy, dev)
87#define transport_class_to_phy(dev) \
88 dev_to_phy((dev)->parent)
89#define phy_to_shost(phy) \
90 dev_to_shost((phy)->dev.parent)
91
92struct request_queue;
93struct sas_rphy {
94 struct device dev;
95 struct sas_identify identify;
96 struct list_head list;
97 struct request_queue *q;
98 u32 scsi_target_id;
99};
100
101#define dev_to_rphy(d) \
102 container_of((d), struct sas_rphy, dev)
103#define transport_class_to_rphy(dev) \
104 dev_to_rphy((dev)->parent)
105#define rphy_to_shost(rphy) \
106 dev_to_shost((rphy)->dev.parent)
107#define target_to_rphy(targ) \
108 dev_to_rphy((targ)->dev.parent)
109
110struct sas_end_device {
111 struct sas_rphy rphy;
112 /* flags */
113 unsigned ready_led_meaning:1;
114 unsigned tlr_supported:1;
115 unsigned tlr_enabled:1;
116 /* parameters */
117 u16 I_T_nexus_loss_timeout;
118 u16 initiator_response_timeout;
119};
120#define rphy_to_end_device(r) \
121 container_of((r), struct sas_end_device, rphy)
122
123struct sas_expander_device {
124 int level;
125 int next_port_id;
126
127 #define SAS_EXPANDER_VENDOR_ID_LEN 8
128 char vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
129 #define SAS_EXPANDER_PRODUCT_ID_LEN 16
130 char product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
131 #define SAS_EXPANDER_PRODUCT_REV_LEN 4
132 char product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
133 #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN 8
134 char component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
135 u16 component_id;
136 u8 component_revision_id;
137
138 struct sas_rphy rphy;
139
140};
141#define rphy_to_expander_device(r) \
142 container_of((r), struct sas_expander_device, rphy)
143
144struct sas_port {
145 struct device dev;
146
147 int port_identifier;
148 int num_phys;
149 /* port flags */
150 unsigned int is_backlink:1;
151
152 /* the other end of the link */
153 struct sas_rphy *rphy;
154
155 struct mutex phy_list_mutex;
156 struct list_head phy_list;
157};
158
159#define dev_to_sas_port(d) \
160 container_of((d), struct sas_port, dev)
161#define transport_class_to_sas_port(dev) \
162 dev_to_sas_port((dev)->parent)
163
164struct sas_phy_linkrates {
165 enum sas_linkrate maximum_linkrate;
166 enum sas_linkrate minimum_linkrate;
167};
168
169/* The functions by which the transport class and the driver communicate */
170struct sas_function_template {
171 int (*get_linkerrors)(struct sas_phy *);
172 int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
173 int (*get_bay_identifier)(struct sas_rphy *);
174 int (*phy_reset)(struct sas_phy *, int);
175 int (*phy_enable)(struct sas_phy *, int);
176 int (*phy_setup)(struct sas_phy *);
177 void (*phy_release)(struct sas_phy *);
178 int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
179 int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
180};
181
182
183void sas_remove_children(struct device *);
184extern void sas_remove_host(struct Scsi_Host *);
185
186extern struct sas_phy *sas_phy_alloc(struct device *, int);
187extern void sas_phy_free(struct sas_phy *);
188extern int sas_phy_add(struct sas_phy *);
189extern void sas_phy_delete(struct sas_phy *);
190extern int scsi_is_sas_phy(const struct device *);
191
192u64 sas_get_address(struct scsi_device *);
193unsigned int sas_tlr_supported(struct scsi_device *);
194unsigned int sas_is_tlr_enabled(struct scsi_device *);
195void sas_disable_tlr(struct scsi_device *);
196void sas_enable_tlr(struct scsi_device *);
197
198extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
199extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
200void sas_rphy_free(struct sas_rphy *);
201extern int sas_rphy_add(struct sas_rphy *);
202extern void sas_rphy_remove(struct sas_rphy *);
203extern void sas_rphy_delete(struct sas_rphy *);
204extern void sas_rphy_unlink(struct sas_rphy *);
205extern int scsi_is_sas_rphy(const struct device *);
206
207struct sas_port *sas_port_alloc(struct device *, int);
208struct sas_port *sas_port_alloc_num(struct device *);
209int sas_port_add(struct sas_port *);
210void sas_port_free(struct sas_port *);
211void sas_port_delete(struct sas_port *);
212void sas_port_add_phy(struct sas_port *, struct sas_phy *);
213void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
214void sas_port_mark_backlink(struct sas_port *);
215int scsi_is_sas_port(const struct device *);
216struct sas_phy *sas_port_get_phy(struct sas_port *port);
217static inline void sas_port_put_phy(struct sas_phy *phy)
218{
219 if (phy)
220 put_device(&phy->dev);
221}
222
223extern struct scsi_transport_template *
224sas_attach_transport(struct sas_function_template *);
225extern void sas_release_transport(struct scsi_transport_template *);
226int sas_read_port_mode_page(struct scsi_device *);
227
228static inline int
229scsi_is_sas_expander_device(struct device *dev)
230{
231 struct sas_rphy *rphy;
232 if (!scsi_is_sas_rphy(dev))
233 return 0;
234 rphy = dev_to_rphy(dev);
235 return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
236 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
237}
238
239#define scsi_is_sas_phy_local(phy) scsi_is_host_device((phy)->dev.parent)
240
241#endif /* SCSI_TRANSPORT_SAS_H */