Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * An rtc driver for the Dallas/Maxim DS1685/DS1687 and related real-time
4 * chips.
5 *
6 * Copyright (C) 2011-2014 Joshua Kinard <kumba@gentoo.org>.
7 * Copyright (C) 2009 Matthias Fuchs <matthias.fuchs@esd-electronics.com>.
8 *
9 * References:
10 * DS1685/DS1687 3V/5V Real-Time Clocks, 19-5215, Rev 4/10.
11 * DS17x85/DS17x87 3V/5V Real-Time Clocks, 19-5222, Rev 4/10.
12 * DS1689/DS1693 3V/5V Serialized Real-Time Clocks, Rev 112105.
13 * Application Note 90, Using the Multiplex Bus RTC Extended Features.
14 */
15
16#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
17
18#include <linux/bcd.h>
19#include <linux/delay.h>
20#include <linux/io.h>
21#include <linux/module.h>
22#include <linux/platform_device.h>
23#include <linux/rtc.h>
24#include <linux/workqueue.h>
25
26#include <linux/rtc/ds1685.h>
27
28#ifdef CONFIG_PROC_FS
29#include <linux/proc_fs.h>
30#endif
31
32
33/* ----------------------------------------------------------------------- */
34/*
35 * Standard read/write
36 * all registers are mapped in CPU address space
37 */
38
39/**
40 * ds1685_read - read a value from an rtc register.
41 * @rtc: pointer to the ds1685 rtc structure.
42 * @reg: the register address to read.
43 */
44static u8
45ds1685_read(struct ds1685_priv *rtc, int reg)
46{
47 return readb((u8 __iomem *)rtc->regs +
48 (reg * rtc->regstep));
49}
50
51/**
52 * ds1685_write - write a value to an rtc register.
53 * @rtc: pointer to the ds1685 rtc structure.
54 * @reg: the register address to write.
55 * @value: value to write to the register.
56 */
57static void
58ds1685_write(struct ds1685_priv *rtc, int reg, u8 value)
59{
60 writeb(value, ((u8 __iomem *)rtc->regs +
61 (reg * rtc->regstep)));
62}
63/* ----------------------------------------------------------------------- */
64
65/*
66 * Indirect read/write functions
67 * access happens via address and data register mapped in CPU address space
68 */
69
70/**
71 * ds1685_indirect_read - read a value from an rtc register.
72 * @rtc: pointer to the ds1685 rtc structure.
73 * @reg: the register address to read.
74 */
75static u8
76ds1685_indirect_read(struct ds1685_priv *rtc, int reg)
77{
78 writeb(reg, rtc->regs);
79 return readb(rtc->data);
80}
81
82/**
83 * ds1685_indirect_write - write a value to an rtc register.
84 * @rtc: pointer to the ds1685 rtc structure.
85 * @reg: the register address to write.
86 * @value: value to write to the register.
87 */
88static void
89ds1685_indirect_write(struct ds1685_priv *rtc, int reg, u8 value)
90{
91 writeb(reg, rtc->regs);
92 writeb(value, rtc->data);
93}
94
95/* ----------------------------------------------------------------------- */
96/* Inlined functions */
97
98/**
99 * ds1685_rtc_bcd2bin - bcd2bin wrapper in case platform doesn't support BCD.
100 * @rtc: pointer to the ds1685 rtc structure.
101 * @val: u8 time value to consider converting.
102 * @bcd_mask: u8 mask value if BCD mode is used.
103 * @bin_mask: u8 mask value if BIN mode is used.
104 *
105 * Returns the value, converted to BIN if originally in BCD and bcd_mode TRUE.
106 */
107static inline u8
108ds1685_rtc_bcd2bin(struct ds1685_priv *rtc, u8 val, u8 bcd_mask, u8 bin_mask)
109{
110 if (rtc->bcd_mode)
111 return (bcd2bin(val) & bcd_mask);
112
113 return (val & bin_mask);
114}
115
116/**
117 * ds1685_rtc_bin2bcd - bin2bcd wrapper in case platform doesn't support BCD.
118 * @rtc: pointer to the ds1685 rtc structure.
119 * @val: u8 time value to consider converting.
120 * @bin_mask: u8 mask value if BIN mode is used.
121 * @bcd_mask: u8 mask value if BCD mode is used.
122 *
123 * Returns the value, converted to BCD if originally in BIN and bcd_mode TRUE.
124 */
125static inline u8
126ds1685_rtc_bin2bcd(struct ds1685_priv *rtc, u8 val, u8 bin_mask, u8 bcd_mask)
127{
128 if (rtc->bcd_mode)
129 return (bin2bcd(val) & bcd_mask);
130
131 return (val & bin_mask);
132}
133
134/**
135 * ds1685_rtc_check_mday - check validity of the day of month.
136 * @rtc: pointer to the ds1685 rtc structure.
137 * @mday: day of month.
138 *
139 * Returns -EDOM if the day of month is not within 1..31 range.
140 */
141static inline int
142ds1685_rtc_check_mday(struct ds1685_priv *rtc, u8 mday)
143{
144 if (rtc->bcd_mode) {
145 if (mday < 0x01 || mday > 0x31 || (mday & 0x0f) > 0x09)
146 return -EDOM;
147 } else {
148 if (mday < 1 || mday > 31)
149 return -EDOM;
150 }
151 return 0;
152}
153
154/**
155 * ds1685_rtc_switch_to_bank0 - switch the rtc to bank 0.
156 * @rtc: pointer to the ds1685 rtc structure.
157 */
158static inline void
159ds1685_rtc_switch_to_bank0(struct ds1685_priv *rtc)
160{
161 rtc->write(rtc, RTC_CTRL_A,
162 (rtc->read(rtc, RTC_CTRL_A) & ~(RTC_CTRL_A_DV0)));
163}
164
165/**
166 * ds1685_rtc_switch_to_bank1 - switch the rtc to bank 1.
167 * @rtc: pointer to the ds1685 rtc structure.
168 */
169static inline void
170ds1685_rtc_switch_to_bank1(struct ds1685_priv *rtc)
171{
172 rtc->write(rtc, RTC_CTRL_A,
173 (rtc->read(rtc, RTC_CTRL_A) | RTC_CTRL_A_DV0));
174}
175
176/**
177 * ds1685_rtc_begin_data_access - prepare the rtc for data access.
178 * @rtc: pointer to the ds1685 rtc structure.
179 *
180 * This takes several steps to prepare the rtc for access to get/set time
181 * and alarm values from the rtc registers:
182 * - Sets the SET bit in Control Register B.
183 * - Reads Ext Control Register 4A and checks the INCR bit.
184 * - If INCR is active, a short delay is added before Ext Control Register 4A
185 * is read again in a loop until INCR is inactive.
186 * - Switches the rtc to bank 1. This allows access to all relevant
187 * data for normal rtc operation, as bank 0 contains only the nvram.
188 */
189static inline void
190ds1685_rtc_begin_data_access(struct ds1685_priv *rtc)
191{
192 /* Set the SET bit in Ctrl B */
193 rtc->write(rtc, RTC_CTRL_B,
194 (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
195
196 /* Switch to Bank 1 */
197 ds1685_rtc_switch_to_bank1(rtc);
198
199 /* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
200 while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
201 cpu_relax();
202}
203
204/**
205 * ds1685_rtc_end_data_access - end data access on the rtc.
206 * @rtc: pointer to the ds1685 rtc structure.
207 *
208 * This ends what was started by ds1685_rtc_begin_data_access:
209 * - Switches the rtc back to bank 0.
210 * - Clears the SET bit in Control Register B.
211 */
212static inline void
213ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
214{
215 /* Switch back to Bank 0 */
216 ds1685_rtc_switch_to_bank0(rtc);
217
218 /* Clear the SET bit in Ctrl B */
219 rtc->write(rtc, RTC_CTRL_B,
220 (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
221}
222
223/**
224 * ds1685_rtc_get_ssn - retrieve the silicon serial number.
225 * @rtc: pointer to the ds1685 rtc structure.
226 * @ssn: u8 array to hold the bits of the silicon serial number.
227 *
228 * This number starts at 0x40, and is 8-bytes long, ending at 0x47. The
229 * first byte is the model number, the next six bytes are the serial number
230 * digits, and the final byte is a CRC check byte. Together, they form the
231 * silicon serial number.
232 *
233 * These values are stored in bank1, so ds1685_rtc_switch_to_bank1 must be
234 * called first before calling this function, else data will be read out of
235 * the bank0 NVRAM. Be sure to call ds1685_rtc_switch_to_bank0 when done.
236 */
237static inline void
238ds1685_rtc_get_ssn(struct ds1685_priv *rtc, u8 *ssn)
239{
240 ssn[0] = rtc->read(rtc, RTC_BANK1_SSN_MODEL);
241 ssn[1] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_1);
242 ssn[2] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_2);
243 ssn[3] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_3);
244 ssn[4] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_4);
245 ssn[5] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_5);
246 ssn[6] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_6);
247 ssn[7] = rtc->read(rtc, RTC_BANK1_SSN_CRC);
248}
249/* ----------------------------------------------------------------------- */
250
251
252/* ----------------------------------------------------------------------- */
253/* Read/Set Time & Alarm functions */
254
255/**
256 * ds1685_rtc_read_time - reads the time registers.
257 * @dev: pointer to device structure.
258 * @tm: pointer to rtc_time structure.
259 */
260static int
261ds1685_rtc_read_time(struct device *dev, struct rtc_time *tm)
262{
263 struct ds1685_priv *rtc = dev_get_drvdata(dev);
264 u8 century;
265 u8 seconds, minutes, hours, wday, mday, month, years;
266
267 /* Fetch the time info from the RTC registers. */
268 ds1685_rtc_begin_data_access(rtc);
269 seconds = rtc->read(rtc, RTC_SECS);
270 minutes = rtc->read(rtc, RTC_MINS);
271 hours = rtc->read(rtc, RTC_HRS);
272 wday = rtc->read(rtc, RTC_WDAY);
273 mday = rtc->read(rtc, RTC_MDAY);
274 month = rtc->read(rtc, RTC_MONTH);
275 years = rtc->read(rtc, RTC_YEAR);
276 century = rtc->read(rtc, RTC_CENTURY);
277 ds1685_rtc_end_data_access(rtc);
278
279 /* bcd2bin if needed, perform fixups, and store to rtc_time. */
280 years = ds1685_rtc_bcd2bin(rtc, years, RTC_YEAR_BCD_MASK,
281 RTC_YEAR_BIN_MASK);
282 century = ds1685_rtc_bcd2bin(rtc, century, RTC_CENTURY_MASK,
283 RTC_CENTURY_MASK);
284 tm->tm_sec = ds1685_rtc_bcd2bin(rtc, seconds, RTC_SECS_BCD_MASK,
285 RTC_SECS_BIN_MASK);
286 tm->tm_min = ds1685_rtc_bcd2bin(rtc, minutes, RTC_MINS_BCD_MASK,
287 RTC_MINS_BIN_MASK);
288 tm->tm_hour = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_24_BCD_MASK,
289 RTC_HRS_24_BIN_MASK);
290 tm->tm_wday = (ds1685_rtc_bcd2bin(rtc, wday, RTC_WDAY_MASK,
291 RTC_WDAY_MASK) - 1);
292 tm->tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
293 RTC_MDAY_BIN_MASK);
294 tm->tm_mon = (ds1685_rtc_bcd2bin(rtc, month, RTC_MONTH_BCD_MASK,
295 RTC_MONTH_BIN_MASK) - 1);
296 tm->tm_year = ((years + (century * 100)) - 1900);
297 tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
298 tm->tm_isdst = 0; /* RTC has hardcoded timezone, so don't use. */
299
300 return 0;
301}
302
303/**
304 * ds1685_rtc_set_time - sets the time registers.
305 * @dev: pointer to device structure.
306 * @tm: pointer to rtc_time structure.
307 */
308static int
309ds1685_rtc_set_time(struct device *dev, struct rtc_time *tm)
310{
311 struct ds1685_priv *rtc = dev_get_drvdata(dev);
312 u8 ctrlb, seconds, minutes, hours, wday, mday, month, years, century;
313
314 /* Fetch the time info from rtc_time. */
315 seconds = ds1685_rtc_bin2bcd(rtc, tm->tm_sec, RTC_SECS_BIN_MASK,
316 RTC_SECS_BCD_MASK);
317 minutes = ds1685_rtc_bin2bcd(rtc, tm->tm_min, RTC_MINS_BIN_MASK,
318 RTC_MINS_BCD_MASK);
319 hours = ds1685_rtc_bin2bcd(rtc, tm->tm_hour, RTC_HRS_24_BIN_MASK,
320 RTC_HRS_24_BCD_MASK);
321 wday = ds1685_rtc_bin2bcd(rtc, (tm->tm_wday + 1), RTC_WDAY_MASK,
322 RTC_WDAY_MASK);
323 mday = ds1685_rtc_bin2bcd(rtc, tm->tm_mday, RTC_MDAY_BIN_MASK,
324 RTC_MDAY_BCD_MASK);
325 month = ds1685_rtc_bin2bcd(rtc, (tm->tm_mon + 1), RTC_MONTH_BIN_MASK,
326 RTC_MONTH_BCD_MASK);
327 years = ds1685_rtc_bin2bcd(rtc, (tm->tm_year % 100),
328 RTC_YEAR_BIN_MASK, RTC_YEAR_BCD_MASK);
329 century = ds1685_rtc_bin2bcd(rtc, ((tm->tm_year + 1900) / 100),
330 RTC_CENTURY_MASK, RTC_CENTURY_MASK);
331
332 /*
333 * Perform Sanity Checks:
334 * - Months: !> 12, Month Day != 0.
335 * - Month Day !> Max days in current month.
336 * - Hours !>= 24, Mins !>= 60, Secs !>= 60, & Weekday !> 7.
337 */
338 if ((tm->tm_mon > 11) || (mday == 0))
339 return -EDOM;
340
341 if (tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year))
342 return -EDOM;
343
344 if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) ||
345 (tm->tm_sec >= 60) || (wday > 7))
346 return -EDOM;
347
348 /*
349 * Set the data mode to use and store the time values in the
350 * RTC registers.
351 */
352 ds1685_rtc_begin_data_access(rtc);
353 ctrlb = rtc->read(rtc, RTC_CTRL_B);
354 if (rtc->bcd_mode)
355 ctrlb &= ~(RTC_CTRL_B_DM);
356 else
357 ctrlb |= RTC_CTRL_B_DM;
358 rtc->write(rtc, RTC_CTRL_B, ctrlb);
359 rtc->write(rtc, RTC_SECS, seconds);
360 rtc->write(rtc, RTC_MINS, minutes);
361 rtc->write(rtc, RTC_HRS, hours);
362 rtc->write(rtc, RTC_WDAY, wday);
363 rtc->write(rtc, RTC_MDAY, mday);
364 rtc->write(rtc, RTC_MONTH, month);
365 rtc->write(rtc, RTC_YEAR, years);
366 rtc->write(rtc, RTC_CENTURY, century);
367 ds1685_rtc_end_data_access(rtc);
368
369 return 0;
370}
371
372/**
373 * ds1685_rtc_read_alarm - reads the alarm registers.
374 * @dev: pointer to device structure.
375 * @alrm: pointer to rtc_wkalrm structure.
376 *
377 * There are three primary alarm registers: seconds, minutes, and hours.
378 * A fourth alarm register for the month date is also available in bank1 for
379 * kickstart/wakeup features. The DS1685/DS1687 manual states that a
380 * "don't care" value ranging from 0xc0 to 0xff may be written into one or
381 * more of the three alarm bytes to act as a wildcard value. The fourth
382 * byte doesn't support a "don't care" value.
383 */
384static int
385ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
386{
387 struct ds1685_priv *rtc = dev_get_drvdata(dev);
388 u8 seconds, minutes, hours, mday, ctrlb, ctrlc;
389 int ret;
390
391 /* Fetch the alarm info from the RTC alarm registers. */
392 ds1685_rtc_begin_data_access(rtc);
393 seconds = rtc->read(rtc, RTC_SECS_ALARM);
394 minutes = rtc->read(rtc, RTC_MINS_ALARM);
395 hours = rtc->read(rtc, RTC_HRS_ALARM);
396 mday = rtc->read(rtc, RTC_MDAY_ALARM);
397 ctrlb = rtc->read(rtc, RTC_CTRL_B);
398 ctrlc = rtc->read(rtc, RTC_CTRL_C);
399 ds1685_rtc_end_data_access(rtc);
400
401 /* Check the month date for validity. */
402 ret = ds1685_rtc_check_mday(rtc, mday);
403 if (ret)
404 return ret;
405
406 /*
407 * Check the three alarm bytes.
408 *
409 * The Linux RTC system doesn't support the "don't care" capability
410 * of this RTC chip. We check for it anyways in case support is
411 * added in the future and only assign when we care.
412 */
413 if (likely(seconds < 0xc0))
414 alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
415 RTC_SECS_BCD_MASK,
416 RTC_SECS_BIN_MASK);
417
418 if (likely(minutes < 0xc0))
419 alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
420 RTC_MINS_BCD_MASK,
421 RTC_MINS_BIN_MASK);
422
423 if (likely(hours < 0xc0))
424 alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
425 RTC_HRS_24_BCD_MASK,
426 RTC_HRS_24_BIN_MASK);
427
428 /* Write the data to rtc_wkalrm. */
429 alrm->time.tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
430 RTC_MDAY_BIN_MASK);
431 alrm->enabled = !!(ctrlb & RTC_CTRL_B_AIE);
432 alrm->pending = !!(ctrlc & RTC_CTRL_C_AF);
433
434 return 0;
435}
436
437/**
438 * ds1685_rtc_set_alarm - sets the alarm in registers.
439 * @dev: pointer to device structure.
440 * @alrm: pointer to rtc_wkalrm structure.
441 */
442static int
443ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
444{
445 struct ds1685_priv *rtc = dev_get_drvdata(dev);
446 u8 ctrlb, seconds, minutes, hours, mday;
447 int ret;
448
449 /* Fetch the alarm info and convert to BCD. */
450 seconds = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_sec,
451 RTC_SECS_BIN_MASK,
452 RTC_SECS_BCD_MASK);
453 minutes = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_min,
454 RTC_MINS_BIN_MASK,
455 RTC_MINS_BCD_MASK);
456 hours = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_hour,
457 RTC_HRS_24_BIN_MASK,
458 RTC_HRS_24_BCD_MASK);
459 mday = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_mday,
460 RTC_MDAY_BIN_MASK,
461 RTC_MDAY_BCD_MASK);
462
463 /* Check the month date for validity. */
464 ret = ds1685_rtc_check_mday(rtc, mday);
465 if (ret)
466 return ret;
467
468 /*
469 * Check the three alarm bytes.
470 *
471 * The Linux RTC system doesn't support the "don't care" capability
472 * of this RTC chip because rtc_valid_tm tries to validate every
473 * field, and we only support four fields. We put the support
474 * here anyways for the future.
475 */
476 if (unlikely(seconds >= 0xc0))
477 seconds = 0xff;
478
479 if (unlikely(minutes >= 0xc0))
480 minutes = 0xff;
481
482 if (unlikely(hours >= 0xc0))
483 hours = 0xff;
484
485 alrm->time.tm_mon = -1;
486 alrm->time.tm_year = -1;
487 alrm->time.tm_wday = -1;
488 alrm->time.tm_yday = -1;
489 alrm->time.tm_isdst = -1;
490
491 /* Disable the alarm interrupt first. */
492 ds1685_rtc_begin_data_access(rtc);
493 ctrlb = rtc->read(rtc, RTC_CTRL_B);
494 rtc->write(rtc, RTC_CTRL_B, (ctrlb & ~(RTC_CTRL_B_AIE)));
495
496 /* Read ctrlc to clear RTC_CTRL_C_AF. */
497 rtc->read(rtc, RTC_CTRL_C);
498
499 /*
500 * Set the data mode to use and store the time values in the
501 * RTC registers.
502 */
503 ctrlb = rtc->read(rtc, RTC_CTRL_B);
504 if (rtc->bcd_mode)
505 ctrlb &= ~(RTC_CTRL_B_DM);
506 else
507 ctrlb |= RTC_CTRL_B_DM;
508 rtc->write(rtc, RTC_CTRL_B, ctrlb);
509 rtc->write(rtc, RTC_SECS_ALARM, seconds);
510 rtc->write(rtc, RTC_MINS_ALARM, minutes);
511 rtc->write(rtc, RTC_HRS_ALARM, hours);
512 rtc->write(rtc, RTC_MDAY_ALARM, mday);
513
514 /* Re-enable the alarm if needed. */
515 if (alrm->enabled) {
516 ctrlb = rtc->read(rtc, RTC_CTRL_B);
517 ctrlb |= RTC_CTRL_B_AIE;
518 rtc->write(rtc, RTC_CTRL_B, ctrlb);
519 }
520
521 /* Done! */
522 ds1685_rtc_end_data_access(rtc);
523
524 return 0;
525}
526/* ----------------------------------------------------------------------- */
527
528
529/* ----------------------------------------------------------------------- */
530/* /dev/rtcX Interface functions */
531
532/**
533 * ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off.
534 * @dev: pointer to device structure.
535 * @enabled: flag indicating whether to enable or disable.
536 */
537static int
538ds1685_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
539{
540 struct ds1685_priv *rtc = dev_get_drvdata(dev);
541
542 /* Flip the requisite interrupt-enable bit. */
543 if (enabled)
544 rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) |
545 RTC_CTRL_B_AIE));
546 else
547 rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) &
548 ~(RTC_CTRL_B_AIE)));
549
550 /* Read Control C to clear all the flag bits. */
551 rtc->read(rtc, RTC_CTRL_C);
552
553 return 0;
554}
555/* ----------------------------------------------------------------------- */
556
557
558/* ----------------------------------------------------------------------- */
559/* IRQ handler */
560
561/**
562 * ds1685_rtc_extended_irq - take care of extended interrupts
563 * @rtc: pointer to the ds1685 rtc structure.
564 * @pdev: platform device pointer.
565 */
566static void
567ds1685_rtc_extended_irq(struct ds1685_priv *rtc, struct platform_device *pdev)
568{
569 u8 ctrl4a, ctrl4b;
570
571 ds1685_rtc_switch_to_bank1(rtc);
572 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
573 ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
574
575 /*
576 * Check for a kickstart interrupt. With Vcc applied, this
577 * typically means that the power button was pressed, so we
578 * begin the shutdown sequence.
579 */
580 if ((ctrl4b & RTC_CTRL_4B_KSE) && (ctrl4a & RTC_CTRL_4A_KF)) {
581 /* Briefly disable kickstarts to debounce button presses. */
582 rtc->write(rtc, RTC_EXT_CTRL_4B,
583 (rtc->read(rtc, RTC_EXT_CTRL_4B) &
584 ~(RTC_CTRL_4B_KSE)));
585
586 /* Clear the kickstart flag. */
587 rtc->write(rtc, RTC_EXT_CTRL_4A,
588 (ctrl4a & ~(RTC_CTRL_4A_KF)));
589
590
591 /*
592 * Sleep 500ms before re-enabling kickstarts. This allows
593 * adequate time to avoid reading signal jitter as additional
594 * button presses.
595 */
596 msleep(500);
597 rtc->write(rtc, RTC_EXT_CTRL_4B,
598 (rtc->read(rtc, RTC_EXT_CTRL_4B) |
599 RTC_CTRL_4B_KSE));
600
601 /* Call the platform pre-poweroff function. Else, shutdown. */
602 if (rtc->prepare_poweroff != NULL)
603 rtc->prepare_poweroff();
604 else
605 ds1685_rtc_poweroff(pdev);
606 }
607
608 /*
609 * Check for a wake-up interrupt. With Vcc applied, this is
610 * essentially a second alarm interrupt, except it takes into
611 * account the 'date' register in bank1 in addition to the
612 * standard three alarm registers.
613 */
614 if ((ctrl4b & RTC_CTRL_4B_WIE) && (ctrl4a & RTC_CTRL_4A_WF)) {
615 rtc->write(rtc, RTC_EXT_CTRL_4A,
616 (ctrl4a & ~(RTC_CTRL_4A_WF)));
617
618 /* Call the platform wake_alarm function if defined. */
619 if (rtc->wake_alarm != NULL)
620 rtc->wake_alarm();
621 else
622 dev_warn(&pdev->dev,
623 "Wake Alarm IRQ just occurred!\n");
624 }
625
626 /*
627 * Check for a ram-clear interrupt. This happens if RIE=1 and RF=0
628 * when RCE=1 in 4B. This clears all NVRAM bytes in bank0 by setting
629 * each byte to a logic 1. This has no effect on any extended
630 * NV-SRAM that might be present, nor on the time/calendar/alarm
631 * registers. After a ram-clear is completed, there is a minimum
632 * recovery time of ~150ms in which all reads/writes are locked out.
633 * NOTE: A ram-clear can still occur if RCE=1 and RIE=0. We cannot
634 * catch this scenario.
635 */
636 if ((ctrl4b & RTC_CTRL_4B_RIE) && (ctrl4a & RTC_CTRL_4A_RF)) {
637 rtc->write(rtc, RTC_EXT_CTRL_4A,
638 (ctrl4a & ~(RTC_CTRL_4A_RF)));
639 msleep(150);
640
641 /* Call the platform post_ram_clear function if defined. */
642 if (rtc->post_ram_clear != NULL)
643 rtc->post_ram_clear();
644 else
645 dev_warn(&pdev->dev,
646 "RAM-Clear IRQ just occurred!\n");
647 }
648 ds1685_rtc_switch_to_bank0(rtc);
649}
650
651/**
652 * ds1685_rtc_irq_handler - IRQ handler.
653 * @irq: IRQ number.
654 * @dev_id: platform device pointer.
655 */
656static irqreturn_t
657ds1685_rtc_irq_handler(int irq, void *dev_id)
658{
659 struct platform_device *pdev = dev_id;
660 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
661 u8 ctrlb, ctrlc;
662 unsigned long events = 0;
663 u8 num_irqs = 0;
664
665 /* Abort early if the device isn't ready yet (i.e., DEBUG_SHIRQ). */
666 if (unlikely(!rtc))
667 return IRQ_HANDLED;
668
669 rtc_lock(rtc->dev);
670
671 /* Ctrlb holds the interrupt-enable bits and ctrlc the flag bits. */
672 ctrlb = rtc->read(rtc, RTC_CTRL_B);
673 ctrlc = rtc->read(rtc, RTC_CTRL_C);
674
675 /* Is the IRQF bit set? */
676 if (likely(ctrlc & RTC_CTRL_C_IRQF)) {
677 /*
678 * We need to determine if it was one of the standard
679 * events: PF, AF, or UF. If so, we handle them and
680 * update the RTC core.
681 */
682 if (likely(ctrlc & RTC_CTRL_B_PAU_MASK)) {
683 events = RTC_IRQF;
684
685 /* Check for a periodic interrupt. */
686 if ((ctrlb & RTC_CTRL_B_PIE) &&
687 (ctrlc & RTC_CTRL_C_PF)) {
688 events |= RTC_PF;
689 num_irqs++;
690 }
691
692 /* Check for an alarm interrupt. */
693 if ((ctrlb & RTC_CTRL_B_AIE) &&
694 (ctrlc & RTC_CTRL_C_AF)) {
695 events |= RTC_AF;
696 num_irqs++;
697 }
698
699 /* Check for an update interrupt. */
700 if ((ctrlb & RTC_CTRL_B_UIE) &&
701 (ctrlc & RTC_CTRL_C_UF)) {
702 events |= RTC_UF;
703 num_irqs++;
704 }
705 } else {
706 /*
707 * One of the "extended" interrupts was received that
708 * is not recognized by the RTC core.
709 */
710 ds1685_rtc_extended_irq(rtc, pdev);
711 }
712 }
713 rtc_update_irq(rtc->dev, num_irqs, events);
714 rtc_unlock(rtc->dev);
715
716 return events ? IRQ_HANDLED : IRQ_NONE;
717}
718/* ----------------------------------------------------------------------- */
719
720
721/* ----------------------------------------------------------------------- */
722/* ProcFS interface */
723
724#ifdef CONFIG_PROC_FS
725#define NUM_REGS 6 /* Num of control registers. */
726#define NUM_BITS 8 /* Num bits per register. */
727#define NUM_SPACES 4 /* Num spaces between each bit. */
728
729/*
730 * Periodic Interrupt Rates.
731 */
732static const char *ds1685_rtc_pirq_rate[16] = {
733 "none", "3.90625ms", "7.8125ms", "0.122070ms", "0.244141ms",
734 "0.488281ms", "0.9765625ms", "1.953125ms", "3.90625ms", "7.8125ms",
735 "15.625ms", "31.25ms", "62.5ms", "125ms", "250ms", "500ms"
736};
737
738/*
739 * Square-Wave Output Frequencies.
740 */
741static const char *ds1685_rtc_sqw_freq[16] = {
742 "none", "256Hz", "128Hz", "8192Hz", "4096Hz", "2048Hz", "1024Hz",
743 "512Hz", "256Hz", "128Hz", "64Hz", "32Hz", "16Hz", "8Hz", "4Hz", "2Hz"
744};
745
746/**
747 * ds1685_rtc_proc - procfs access function.
748 * @dev: pointer to device structure.
749 * @seq: pointer to seq_file structure.
750 */
751static int
752ds1685_rtc_proc(struct device *dev, struct seq_file *seq)
753{
754 struct ds1685_priv *rtc = dev_get_drvdata(dev);
755 u8 ctrla, ctrlb, ctrld, ctrl4a, ctrl4b, ssn[8];
756 char *model;
757
758 /* Read all the relevant data from the control registers. */
759 ds1685_rtc_switch_to_bank1(rtc);
760 ds1685_rtc_get_ssn(rtc, ssn);
761 ctrla = rtc->read(rtc, RTC_CTRL_A);
762 ctrlb = rtc->read(rtc, RTC_CTRL_B);
763 ctrld = rtc->read(rtc, RTC_CTRL_D);
764 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
765 ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
766 ds1685_rtc_switch_to_bank0(rtc);
767
768 /* Determine the RTC model. */
769 switch (ssn[0]) {
770 case RTC_MODEL_DS1685:
771 model = "DS1685/DS1687\0";
772 break;
773 case RTC_MODEL_DS1689:
774 model = "DS1689/DS1693\0";
775 break;
776 case RTC_MODEL_DS17285:
777 model = "DS17285/DS17287\0";
778 break;
779 case RTC_MODEL_DS17485:
780 model = "DS17485/DS17487\0";
781 break;
782 case RTC_MODEL_DS17885:
783 model = "DS17885/DS17887\0";
784 break;
785 default:
786 model = "Unknown\0";
787 break;
788 }
789
790 /* Print out the information. */
791 seq_printf(seq,
792 "Model\t\t: %s\n"
793 "Oscillator\t: %s\n"
794 "12/24hr\t\t: %s\n"
795 "DST\t\t: %s\n"
796 "Data mode\t: %s\n"
797 "Battery\t\t: %s\n"
798 "Aux batt\t: %s\n"
799 "Update IRQ\t: %s\n"
800 "Periodic IRQ\t: %s\n"
801 "Periodic Rate\t: %s\n"
802 "SQW Freq\t: %s\n"
803 "Serial #\t: %8phC\n",
804 model,
805 ((ctrla & RTC_CTRL_A_DV1) ? "enabled" : "disabled"),
806 ((ctrlb & RTC_CTRL_B_2412) ? "24-hour" : "12-hour"),
807 ((ctrlb & RTC_CTRL_B_DSE) ? "enabled" : "disabled"),
808 ((ctrlb & RTC_CTRL_B_DM) ? "binary" : "BCD"),
809 ((ctrld & RTC_CTRL_D_VRT) ? "ok" : "exhausted or n/a"),
810 ((ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "exhausted or n/a"),
811 ((ctrlb & RTC_CTRL_B_UIE) ? "yes" : "no"),
812 ((ctrlb & RTC_CTRL_B_PIE) ? "yes" : "no"),
813 (!(ctrl4b & RTC_CTRL_4B_E32K) ?
814 ds1685_rtc_pirq_rate[(ctrla & RTC_CTRL_A_RS_MASK)] : "none"),
815 (!((ctrl4b & RTC_CTRL_4B_E32K)) ?
816 ds1685_rtc_sqw_freq[(ctrla & RTC_CTRL_A_RS_MASK)] : "32768Hz"),
817 ssn);
818 return 0;
819}
820#else
821#define ds1685_rtc_proc NULL
822#endif /* CONFIG_PROC_FS */
823/* ----------------------------------------------------------------------- */
824
825
826/* ----------------------------------------------------------------------- */
827/* RTC Class operations */
828
829static const struct rtc_class_ops
830ds1685_rtc_ops = {
831 .proc = ds1685_rtc_proc,
832 .read_time = ds1685_rtc_read_time,
833 .set_time = ds1685_rtc_set_time,
834 .read_alarm = ds1685_rtc_read_alarm,
835 .set_alarm = ds1685_rtc_set_alarm,
836 .alarm_irq_enable = ds1685_rtc_alarm_irq_enable,
837};
838/* ----------------------------------------------------------------------- */
839
840static int ds1685_nvram_read(void *priv, unsigned int pos, void *val,
841 size_t size)
842{
843 struct ds1685_priv *rtc = priv;
844 struct mutex *rtc_mutex = &rtc->dev->ops_lock;
845 ssize_t count;
846 u8 *buf = val;
847 int err;
848
849 err = mutex_lock_interruptible(rtc_mutex);
850 if (err)
851 return err;
852
853 ds1685_rtc_switch_to_bank0(rtc);
854
855 /* Read NVRAM in time and bank0 registers. */
856 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
857 count++, size--) {
858 if (count < NVRAM_SZ_TIME)
859 *buf++ = rtc->read(rtc, (NVRAM_TIME_BASE + pos++));
860 else
861 *buf++ = rtc->read(rtc, (NVRAM_BANK0_BASE + pos++));
862 }
863
864#ifndef CONFIG_RTC_DRV_DS1689
865 if (size > 0) {
866 ds1685_rtc_switch_to_bank1(rtc);
867
868#ifndef CONFIG_RTC_DRV_DS1685
869 /* Enable burst-mode on DS17x85/DS17x87 */
870 rtc->write(rtc, RTC_EXT_CTRL_4A,
871 (rtc->read(rtc, RTC_EXT_CTRL_4A) |
872 RTC_CTRL_4A_BME));
873
874 /* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
875 * reading with burst-mode */
876 rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
877 (pos - NVRAM_TOTAL_SZ_BANK0));
878#endif
879
880 /* Read NVRAM in bank1 registers. */
881 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
882 count++, size--) {
883#ifdef CONFIG_RTC_DRV_DS1685
884 /* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
885 * before each read. */
886 rtc->write(rtc, RTC_BANK1_RAM_ADDR,
887 (pos - NVRAM_TOTAL_SZ_BANK0));
888#endif
889 *buf++ = rtc->read(rtc, RTC_BANK1_RAM_DATA_PORT);
890 pos++;
891 }
892
893#ifndef CONFIG_RTC_DRV_DS1685
894 /* Disable burst-mode on DS17x85/DS17x87 */
895 rtc->write(rtc, RTC_EXT_CTRL_4A,
896 (rtc->read(rtc, RTC_EXT_CTRL_4A) &
897 ~(RTC_CTRL_4A_BME)));
898#endif
899 ds1685_rtc_switch_to_bank0(rtc);
900 }
901#endif /* !CONFIG_RTC_DRV_DS1689 */
902 mutex_unlock(rtc_mutex);
903
904 return 0;
905}
906
907static int ds1685_nvram_write(void *priv, unsigned int pos, void *val,
908 size_t size)
909{
910 struct ds1685_priv *rtc = priv;
911 struct mutex *rtc_mutex = &rtc->dev->ops_lock;
912 ssize_t count;
913 u8 *buf = val;
914 int err;
915
916 err = mutex_lock_interruptible(rtc_mutex);
917 if (err)
918 return err;
919
920 ds1685_rtc_switch_to_bank0(rtc);
921
922 /* Write NVRAM in time and bank0 registers. */
923 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
924 count++, size--)
925 if (count < NVRAM_SZ_TIME)
926 rtc->write(rtc, (NVRAM_TIME_BASE + pos++),
927 *buf++);
928 else
929 rtc->write(rtc, (NVRAM_BANK0_BASE), *buf++);
930
931#ifndef CONFIG_RTC_DRV_DS1689
932 if (size > 0) {
933 ds1685_rtc_switch_to_bank1(rtc);
934
935#ifndef CONFIG_RTC_DRV_DS1685
936 /* Enable burst-mode on DS17x85/DS17x87 */
937 rtc->write(rtc, RTC_EXT_CTRL_4A,
938 (rtc->read(rtc, RTC_EXT_CTRL_4A) |
939 RTC_CTRL_4A_BME));
940
941 /* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
942 * writing with burst-mode */
943 rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
944 (pos - NVRAM_TOTAL_SZ_BANK0));
945#endif
946
947 /* Write NVRAM in bank1 registers. */
948 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
949 count++, size--) {
950#ifdef CONFIG_RTC_DRV_DS1685
951 /* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
952 * before each read. */
953 rtc->write(rtc, RTC_BANK1_RAM_ADDR,
954 (pos - NVRAM_TOTAL_SZ_BANK0));
955#endif
956 rtc->write(rtc, RTC_BANK1_RAM_DATA_PORT, *buf++);
957 pos++;
958 }
959
960#ifndef CONFIG_RTC_DRV_DS1685
961 /* Disable burst-mode on DS17x85/DS17x87 */
962 rtc->write(rtc, RTC_EXT_CTRL_4A,
963 (rtc->read(rtc, RTC_EXT_CTRL_4A) &
964 ~(RTC_CTRL_4A_BME)));
965#endif
966 ds1685_rtc_switch_to_bank0(rtc);
967 }
968#endif /* !CONFIG_RTC_DRV_DS1689 */
969 mutex_unlock(rtc_mutex);
970
971 return 0;
972}
973
974/* ----------------------------------------------------------------------- */
975/* SysFS interface */
976
977/**
978 * ds1685_rtc_sysfs_battery_show - sysfs file for main battery status.
979 * @dev: pointer to device structure.
980 * @attr: pointer to device_attribute structure.
981 * @buf: pointer to char array to hold the output.
982 */
983static ssize_t
984ds1685_rtc_sysfs_battery_show(struct device *dev,
985 struct device_attribute *attr, char *buf)
986{
987 struct ds1685_priv *rtc = dev_get_drvdata(dev->parent);
988 u8 ctrld;
989
990 ctrld = rtc->read(rtc, RTC_CTRL_D);
991
992 return sprintf(buf, "%s\n",
993 (ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
994}
995static DEVICE_ATTR(battery, S_IRUGO, ds1685_rtc_sysfs_battery_show, NULL);
996
997/**
998 * ds1685_rtc_sysfs_auxbatt_show - sysfs file for aux battery status.
999 * @dev: pointer to device structure.
1000 * @attr: pointer to device_attribute structure.
1001 * @buf: pointer to char array to hold the output.
1002 */
1003static ssize_t
1004ds1685_rtc_sysfs_auxbatt_show(struct device *dev,
1005 struct device_attribute *attr, char *buf)
1006{
1007 struct ds1685_priv *rtc = dev_get_drvdata(dev->parent);
1008 u8 ctrl4a;
1009
1010 ds1685_rtc_switch_to_bank1(rtc);
1011 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
1012 ds1685_rtc_switch_to_bank0(rtc);
1013
1014 return sprintf(buf, "%s\n",
1015 (ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
1016}
1017static DEVICE_ATTR(auxbatt, S_IRUGO, ds1685_rtc_sysfs_auxbatt_show, NULL);
1018
1019/**
1020 * ds1685_rtc_sysfs_serial_show - sysfs file for silicon serial number.
1021 * @dev: pointer to device structure.
1022 * @attr: pointer to device_attribute structure.
1023 * @buf: pointer to char array to hold the output.
1024 */
1025static ssize_t
1026ds1685_rtc_sysfs_serial_show(struct device *dev,
1027 struct device_attribute *attr, char *buf)
1028{
1029 struct ds1685_priv *rtc = dev_get_drvdata(dev->parent);
1030 u8 ssn[8];
1031
1032 ds1685_rtc_switch_to_bank1(rtc);
1033 ds1685_rtc_get_ssn(rtc, ssn);
1034 ds1685_rtc_switch_to_bank0(rtc);
1035
1036 return sprintf(buf, "%8phC\n", ssn);
1037}
1038static DEVICE_ATTR(serial, S_IRUGO, ds1685_rtc_sysfs_serial_show, NULL);
1039
1040/*
1041 * struct ds1685_rtc_sysfs_misc_attrs - list for misc RTC features.
1042 */
1043static struct attribute*
1044ds1685_rtc_sysfs_misc_attrs[] = {
1045 &dev_attr_battery.attr,
1046 &dev_attr_auxbatt.attr,
1047 &dev_attr_serial.attr,
1048 NULL,
1049};
1050
1051/*
1052 * struct ds1685_rtc_sysfs_misc_grp - attr group for misc RTC features.
1053 */
1054static const struct attribute_group
1055ds1685_rtc_sysfs_misc_grp = {
1056 .name = "misc",
1057 .attrs = ds1685_rtc_sysfs_misc_attrs,
1058};
1059
1060/* ----------------------------------------------------------------------- */
1061/* Driver Probe/Removal */
1062
1063/**
1064 * ds1685_rtc_probe - initializes rtc driver.
1065 * @pdev: pointer to platform_device structure.
1066 */
1067static int
1068ds1685_rtc_probe(struct platform_device *pdev)
1069{
1070 struct rtc_device *rtc_dev;
1071 struct ds1685_priv *rtc;
1072 struct ds1685_rtc_platform_data *pdata;
1073 u8 ctrla, ctrlb, hours;
1074 unsigned char am_pm;
1075 int ret = 0;
1076 struct nvmem_config nvmem_cfg = {
1077 .name = "ds1685_nvram",
1078 .size = NVRAM_TOTAL_SZ,
1079 .reg_read = ds1685_nvram_read,
1080 .reg_write = ds1685_nvram_write,
1081 };
1082
1083 /* Get the platform data. */
1084 pdata = (struct ds1685_rtc_platform_data *) pdev->dev.platform_data;
1085 if (!pdata)
1086 return -ENODEV;
1087
1088 /* Allocate memory for the rtc device. */
1089 rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
1090 if (!rtc)
1091 return -ENOMEM;
1092
1093 /* Setup resources and access functions */
1094 switch (pdata->access_type) {
1095 case ds1685_reg_direct:
1096 rtc->regs = devm_platform_ioremap_resource(pdev, 0);
1097 if (IS_ERR(rtc->regs))
1098 return PTR_ERR(rtc->regs);
1099 rtc->read = ds1685_read;
1100 rtc->write = ds1685_write;
1101 break;
1102 case ds1685_reg_indirect:
1103 rtc->regs = devm_platform_ioremap_resource(pdev, 0);
1104 if (IS_ERR(rtc->regs))
1105 return PTR_ERR(rtc->regs);
1106 rtc->data = devm_platform_ioremap_resource(pdev, 1);
1107 if (IS_ERR(rtc->data))
1108 return PTR_ERR(rtc->data);
1109 rtc->read = ds1685_indirect_read;
1110 rtc->write = ds1685_indirect_write;
1111 break;
1112 }
1113
1114 if (!rtc->read || !rtc->write)
1115 return -ENXIO;
1116
1117 /* Get the register step size. */
1118 if (pdata->regstep > 0)
1119 rtc->regstep = pdata->regstep;
1120 else
1121 rtc->regstep = 1;
1122
1123 /* Platform pre-shutdown function, if defined. */
1124 if (pdata->plat_prepare_poweroff)
1125 rtc->prepare_poweroff = pdata->plat_prepare_poweroff;
1126
1127 /* Platform wake_alarm function, if defined. */
1128 if (pdata->plat_wake_alarm)
1129 rtc->wake_alarm = pdata->plat_wake_alarm;
1130
1131 /* Platform post_ram_clear function, if defined. */
1132 if (pdata->plat_post_ram_clear)
1133 rtc->post_ram_clear = pdata->plat_post_ram_clear;
1134
1135 /* set the driver data. */
1136 platform_set_drvdata(pdev, rtc);
1137
1138 /* Turn the oscillator on if is not already on (DV1 = 1). */
1139 ctrla = rtc->read(rtc, RTC_CTRL_A);
1140 if (!(ctrla & RTC_CTRL_A_DV1))
1141 ctrla |= RTC_CTRL_A_DV1;
1142
1143 /* Enable the countdown chain (DV2 = 0) */
1144 ctrla &= ~(RTC_CTRL_A_DV2);
1145
1146 /* Clear RS3-RS0 in Control A. */
1147 ctrla &= ~(RTC_CTRL_A_RS_MASK);
1148
1149 /*
1150 * All done with Control A. Switch to Bank 1 for the remainder of
1151 * the RTC setup so we have access to the extended functions.
1152 */
1153 ctrla |= RTC_CTRL_A_DV0;
1154 rtc->write(rtc, RTC_CTRL_A, ctrla);
1155
1156 /* Default to 32768kHz output. */
1157 rtc->write(rtc, RTC_EXT_CTRL_4B,
1158 (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_E32K));
1159
1160 /* Set the SET bit in Control B so we can do some housekeeping. */
1161 rtc->write(rtc, RTC_CTRL_B,
1162 (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
1163
1164 /* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
1165 while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
1166 cpu_relax();
1167
1168 /*
1169 * If the platform supports BCD mode, then set DM=0 in Control B.
1170 * Otherwise, set DM=1 for BIN mode.
1171 */
1172 ctrlb = rtc->read(rtc, RTC_CTRL_B);
1173 if (pdata->bcd_mode)
1174 ctrlb &= ~(RTC_CTRL_B_DM);
1175 else
1176 ctrlb |= RTC_CTRL_B_DM;
1177 rtc->bcd_mode = pdata->bcd_mode;
1178
1179 /*
1180 * Disable Daylight Savings Time (DSE = 0).
1181 * The RTC has hardcoded timezone information that is rendered
1182 * obselete. We'll let the OS deal with DST settings instead.
1183 */
1184 if (ctrlb & RTC_CTRL_B_DSE)
1185 ctrlb &= ~(RTC_CTRL_B_DSE);
1186
1187 /* Force 24-hour mode (2412 = 1). */
1188 if (!(ctrlb & RTC_CTRL_B_2412)) {
1189 /* Reinitialize the time hours. */
1190 hours = rtc->read(rtc, RTC_HRS);
1191 am_pm = hours & RTC_HRS_AMPM_MASK;
1192 hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
1193 RTC_HRS_12_BIN_MASK);
1194 hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
1195
1196 /* Enable 24-hour mode. */
1197 ctrlb |= RTC_CTRL_B_2412;
1198
1199 /* Write back to Control B, including DM & DSE bits. */
1200 rtc->write(rtc, RTC_CTRL_B, ctrlb);
1201
1202 /* Write the time hours back. */
1203 rtc->write(rtc, RTC_HRS,
1204 ds1685_rtc_bin2bcd(rtc, hours,
1205 RTC_HRS_24_BIN_MASK,
1206 RTC_HRS_24_BCD_MASK));
1207
1208 /* Reinitialize the alarm hours. */
1209 hours = rtc->read(rtc, RTC_HRS_ALARM);
1210 am_pm = hours & RTC_HRS_AMPM_MASK;
1211 hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
1212 RTC_HRS_12_BIN_MASK);
1213 hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
1214
1215 /* Write the alarm hours back. */
1216 rtc->write(rtc, RTC_HRS_ALARM,
1217 ds1685_rtc_bin2bcd(rtc, hours,
1218 RTC_HRS_24_BIN_MASK,
1219 RTC_HRS_24_BCD_MASK));
1220 } else {
1221 /* 24-hour mode is already set, so write Control B back. */
1222 rtc->write(rtc, RTC_CTRL_B, ctrlb);
1223 }
1224
1225 /* Unset the SET bit in Control B so the RTC can update. */
1226 rtc->write(rtc, RTC_CTRL_B,
1227 (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
1228
1229 /* Check the main battery. */
1230 if (!(rtc->read(rtc, RTC_CTRL_D) & RTC_CTRL_D_VRT))
1231 dev_warn(&pdev->dev,
1232 "Main battery is exhausted! RTC may be invalid!\n");
1233
1234 /* Check the auxillary battery. It is optional. */
1235 if (!(rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_VRT2))
1236 dev_warn(&pdev->dev,
1237 "Aux battery is exhausted or not available.\n");
1238
1239 /* Read Ctrl B and clear PIE/AIE/UIE. */
1240 rtc->write(rtc, RTC_CTRL_B,
1241 (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_PAU_MASK)));
1242
1243 /* Reading Ctrl C auto-clears PF/AF/UF. */
1244 rtc->read(rtc, RTC_CTRL_C);
1245
1246 /* Read Ctrl 4B and clear RIE/WIE/KSE. */
1247 rtc->write(rtc, RTC_EXT_CTRL_4B,
1248 (rtc->read(rtc, RTC_EXT_CTRL_4B) & ~(RTC_CTRL_4B_RWK_MASK)));
1249
1250 /* Clear RF/WF/KF in Ctrl 4A. */
1251 rtc->write(rtc, RTC_EXT_CTRL_4A,
1252 (rtc->read(rtc, RTC_EXT_CTRL_4A) & ~(RTC_CTRL_4A_RWK_MASK)));
1253
1254 /*
1255 * Re-enable KSE to handle power button events. We do not enable
1256 * WIE or RIE by default.
1257 */
1258 rtc->write(rtc, RTC_EXT_CTRL_4B,
1259 (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_KSE));
1260
1261 rtc_dev = devm_rtc_allocate_device(&pdev->dev);
1262 if (IS_ERR(rtc_dev))
1263 return PTR_ERR(rtc_dev);
1264
1265 rtc_dev->ops = &ds1685_rtc_ops;
1266
1267 /* Century bit is useless because leap year fails in 1900 and 2100 */
1268 rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
1269 rtc_dev->range_max = RTC_TIMESTAMP_END_2099;
1270
1271 /* Maximum periodic rate is 8192Hz (0.122070ms). */
1272 rtc_dev->max_user_freq = RTC_MAX_USER_FREQ;
1273
1274 /* See if the platform doesn't support UIE. */
1275 if (pdata->uie_unsupported)
1276 clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc_dev->features);
1277
1278 rtc->dev = rtc_dev;
1279
1280 /*
1281 * Fetch the IRQ and setup the interrupt handler.
1282 *
1283 * Not all platforms have the IRQF pin tied to something. If not, the
1284 * RTC will still set the *IE / *F flags and raise IRQF in ctrlc, but
1285 * there won't be an automatic way of notifying the kernel about it,
1286 * unless ctrlc is explicitly polled.
1287 */
1288 rtc->irq_num = platform_get_irq(pdev, 0);
1289 if (rtc->irq_num <= 0) {
1290 clear_bit(RTC_FEATURE_ALARM, rtc_dev->features);
1291 } else {
1292 /* Request an IRQ. */
1293 ret = devm_request_threaded_irq(&pdev->dev, rtc->irq_num,
1294 NULL, ds1685_rtc_irq_handler,
1295 IRQF_SHARED | IRQF_ONESHOT,
1296 pdev->name, pdev);
1297
1298 /* Check to see if something came back. */
1299 if (unlikely(ret)) {
1300 dev_warn(&pdev->dev,
1301 "RTC interrupt not available\n");
1302 rtc->irq_num = 0;
1303 }
1304 }
1305
1306 /* Setup complete. */
1307 ds1685_rtc_switch_to_bank0(rtc);
1308
1309 ret = rtc_add_group(rtc_dev, &ds1685_rtc_sysfs_misc_grp);
1310 if (ret)
1311 return ret;
1312
1313 nvmem_cfg.priv = rtc;
1314 ret = devm_rtc_nvmem_register(rtc_dev, &nvmem_cfg);
1315 if (ret)
1316 return ret;
1317
1318 return devm_rtc_register_device(rtc_dev);
1319}
1320
1321/**
1322 * ds1685_rtc_remove - removes rtc driver.
1323 * @pdev: pointer to platform_device structure.
1324 */
1325static int
1326ds1685_rtc_remove(struct platform_device *pdev)
1327{
1328 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1329
1330 /* Read Ctrl B and clear PIE/AIE/UIE. */
1331 rtc->write(rtc, RTC_CTRL_B,
1332 (rtc->read(rtc, RTC_CTRL_B) &
1333 ~(RTC_CTRL_B_PAU_MASK)));
1334
1335 /* Reading Ctrl C auto-clears PF/AF/UF. */
1336 rtc->read(rtc, RTC_CTRL_C);
1337
1338 /* Read Ctrl 4B and clear RIE/WIE/KSE. */
1339 rtc->write(rtc, RTC_EXT_CTRL_4B,
1340 (rtc->read(rtc, RTC_EXT_CTRL_4B) &
1341 ~(RTC_CTRL_4B_RWK_MASK)));
1342
1343 /* Manually clear RF/WF/KF in Ctrl 4A. */
1344 rtc->write(rtc, RTC_EXT_CTRL_4A,
1345 (rtc->read(rtc, RTC_EXT_CTRL_4A) &
1346 ~(RTC_CTRL_4A_RWK_MASK)));
1347
1348 return 0;
1349}
1350
1351/*
1352 * ds1685_rtc_driver - rtc driver properties.
1353 */
1354static struct platform_driver ds1685_rtc_driver = {
1355 .driver = {
1356 .name = "rtc-ds1685",
1357 },
1358 .probe = ds1685_rtc_probe,
1359 .remove = ds1685_rtc_remove,
1360};
1361module_platform_driver(ds1685_rtc_driver);
1362/* ----------------------------------------------------------------------- */
1363
1364
1365/* ----------------------------------------------------------------------- */
1366/* Poweroff function */
1367
1368/**
1369 * ds1685_rtc_poweroff - uses the RTC chip to power the system off.
1370 * @pdev: pointer to platform_device structure.
1371 */
1372void __noreturn
1373ds1685_rtc_poweroff(struct platform_device *pdev)
1374{
1375 u8 ctrla, ctrl4a, ctrl4b;
1376 struct ds1685_priv *rtc;
1377
1378 /* Check for valid RTC data, else, spin forever. */
1379 if (unlikely(!pdev)) {
1380 pr_emerg("platform device data not available, spinning forever ...\n");
1381 while(1);
1382 unreachable();
1383 } else {
1384 /* Get the rtc data. */
1385 rtc = platform_get_drvdata(pdev);
1386
1387 /*
1388 * Disable our IRQ. We're powering down, so we're not
1389 * going to worry about cleaning up. Most of that should
1390 * have been taken care of by the shutdown scripts and this
1391 * is the final function call.
1392 */
1393 if (rtc->irq_num)
1394 disable_irq_nosync(rtc->irq_num);
1395
1396 /* Oscillator must be on and the countdown chain enabled. */
1397 ctrla = rtc->read(rtc, RTC_CTRL_A);
1398 ctrla |= RTC_CTRL_A_DV1;
1399 ctrla &= ~(RTC_CTRL_A_DV2);
1400 rtc->write(rtc, RTC_CTRL_A, ctrla);
1401
1402 /*
1403 * Read Control 4A and check the status of the auxillary
1404 * battery. This must be present and working (VRT2 = 1)
1405 * for wakeup and kickstart functionality to be useful.
1406 */
1407 ds1685_rtc_switch_to_bank1(rtc);
1408 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
1409 if (ctrl4a & RTC_CTRL_4A_VRT2) {
1410 /* Clear all of the interrupt flags on Control 4A. */
1411 ctrl4a &= ~(RTC_CTRL_4A_RWK_MASK);
1412 rtc->write(rtc, RTC_EXT_CTRL_4A, ctrl4a);
1413
1414 /*
1415 * The auxillary battery is present and working.
1416 * Enable extended functions (ABE=1), enable
1417 * wake-up (WIE=1), and enable kickstart (KSE=1)
1418 * in Control 4B.
1419 */
1420 ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
1421 ctrl4b |= (RTC_CTRL_4B_ABE | RTC_CTRL_4B_WIE |
1422 RTC_CTRL_4B_KSE);
1423 rtc->write(rtc, RTC_EXT_CTRL_4B, ctrl4b);
1424 }
1425
1426 /* Set PAB to 1 in Control 4A to power the system down. */
1427 dev_warn(&pdev->dev, "Powerdown.\n");
1428 msleep(20);
1429 rtc->write(rtc, RTC_EXT_CTRL_4A,
1430 (ctrl4a | RTC_CTRL_4A_PAB));
1431
1432 /* Spin ... we do not switch back to bank0. */
1433 while(1);
1434 unreachable();
1435 }
1436}
1437EXPORT_SYMBOL(ds1685_rtc_poweroff);
1438/* ----------------------------------------------------------------------- */
1439
1440
1441MODULE_AUTHOR("Joshua Kinard <kumba@gentoo.org>");
1442MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd-electronics.com>");
1443MODULE_DESCRIPTION("Dallas/Maxim DS1685/DS1687-series RTC driver");
1444MODULE_LICENSE("GPL");
1445MODULE_ALIAS("platform:rtc-ds1685");
1/*
2 * An rtc driver for the Dallas/Maxim DS1685/DS1687 and related real-time
3 * chips.
4 *
5 * Copyright (C) 2011-2014 Joshua Kinard <kumba@gentoo.org>.
6 * Copyright (C) 2009 Matthias Fuchs <matthias.fuchs@esd-electronics.com>.
7 *
8 * References:
9 * DS1685/DS1687 3V/5V Real-Time Clocks, 19-5215, Rev 4/10.
10 * DS17x85/DS17x87 3V/5V Real-Time Clocks, 19-5222, Rev 4/10.
11 * DS1689/DS1693 3V/5V Serialized Real-Time Clocks, Rev 112105.
12 * Application Note 90, Using the Multiplex Bus RTC Extended Features.
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
17 */
18
19#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20
21#include <linux/bcd.h>
22#include <linux/delay.h>
23#include <linux/io.h>
24#include <linux/module.h>
25#include <linux/platform_device.h>
26#include <linux/rtc.h>
27#include <linux/workqueue.h>
28
29#include <linux/rtc/ds1685.h>
30
31#ifdef CONFIG_PROC_FS
32#include <linux/proc_fs.h>
33#endif
34
35#define DRV_VERSION "0.42.0"
36
37
38/* ----------------------------------------------------------------------- */
39/* Standard read/write functions if platform does not provide overrides */
40
41/**
42 * ds1685_read - read a value from an rtc register.
43 * @rtc: pointer to the ds1685 rtc structure.
44 * @reg: the register address to read.
45 */
46static u8
47ds1685_read(struct ds1685_priv *rtc, int reg)
48{
49 return readb((u8 __iomem *)rtc->regs +
50 (reg * rtc->regstep));
51}
52
53/**
54 * ds1685_write - write a value to an rtc register.
55 * @rtc: pointer to the ds1685 rtc structure.
56 * @reg: the register address to write.
57 * @value: value to write to the register.
58 */
59static void
60ds1685_write(struct ds1685_priv *rtc, int reg, u8 value)
61{
62 writeb(value, ((u8 __iomem *)rtc->regs +
63 (reg * rtc->regstep)));
64}
65/* ----------------------------------------------------------------------- */
66
67
68/* ----------------------------------------------------------------------- */
69/* Inlined functions */
70
71/**
72 * ds1685_rtc_bcd2bin - bcd2bin wrapper in case platform doesn't support BCD.
73 * @rtc: pointer to the ds1685 rtc structure.
74 * @val: u8 time value to consider converting.
75 * @bcd_mask: u8 mask value if BCD mode is used.
76 * @bin_mask: u8 mask value if BIN mode is used.
77 *
78 * Returns the value, converted to BIN if originally in BCD and bcd_mode TRUE.
79 */
80static inline u8
81ds1685_rtc_bcd2bin(struct ds1685_priv *rtc, u8 val, u8 bcd_mask, u8 bin_mask)
82{
83 if (rtc->bcd_mode)
84 return (bcd2bin(val) & bcd_mask);
85
86 return (val & bin_mask);
87}
88
89/**
90 * ds1685_rtc_bin2bcd - bin2bcd wrapper in case platform doesn't support BCD.
91 * @rtc: pointer to the ds1685 rtc structure.
92 * @val: u8 time value to consider converting.
93 * @bin_mask: u8 mask value if BIN mode is used.
94 * @bcd_mask: u8 mask value if BCD mode is used.
95 *
96 * Returns the value, converted to BCD if originally in BIN and bcd_mode TRUE.
97 */
98static inline u8
99ds1685_rtc_bin2bcd(struct ds1685_priv *rtc, u8 val, u8 bin_mask, u8 bcd_mask)
100{
101 if (rtc->bcd_mode)
102 return (bin2bcd(val) & bcd_mask);
103
104 return (val & bin_mask);
105}
106
107/**
108 * ds1685_rtc_switch_to_bank0 - switch the rtc to bank 0.
109 * @rtc: pointer to the ds1685 rtc structure.
110 */
111static inline void
112ds1685_rtc_switch_to_bank0(struct ds1685_priv *rtc)
113{
114 rtc->write(rtc, RTC_CTRL_A,
115 (rtc->read(rtc, RTC_CTRL_A) & ~(RTC_CTRL_A_DV0)));
116}
117
118/**
119 * ds1685_rtc_switch_to_bank1 - switch the rtc to bank 1.
120 * @rtc: pointer to the ds1685 rtc structure.
121 */
122static inline void
123ds1685_rtc_switch_to_bank1(struct ds1685_priv *rtc)
124{
125 rtc->write(rtc, RTC_CTRL_A,
126 (rtc->read(rtc, RTC_CTRL_A) | RTC_CTRL_A_DV0));
127}
128
129/**
130 * ds1685_rtc_begin_data_access - prepare the rtc for data access.
131 * @rtc: pointer to the ds1685 rtc structure.
132 *
133 * This takes several steps to prepare the rtc for access to get/set time
134 * and alarm values from the rtc registers:
135 * - Sets the SET bit in Control Register B.
136 * - Reads Ext Control Register 4A and checks the INCR bit.
137 * - If INCR is active, a short delay is added before Ext Control Register 4A
138 * is read again in a loop until INCR is inactive.
139 * - Switches the rtc to bank 1. This allows access to all relevant
140 * data for normal rtc operation, as bank 0 contains only the nvram.
141 */
142static inline void
143ds1685_rtc_begin_data_access(struct ds1685_priv *rtc)
144{
145 /* Set the SET bit in Ctrl B */
146 rtc->write(rtc, RTC_CTRL_B,
147 (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
148
149 /* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
150 while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
151 cpu_relax();
152
153 /* Switch to Bank 1 */
154 ds1685_rtc_switch_to_bank1(rtc);
155}
156
157/**
158 * ds1685_rtc_end_data_access - end data access on the rtc.
159 * @rtc: pointer to the ds1685 rtc structure.
160 *
161 * This ends what was started by ds1685_rtc_begin_data_access:
162 * - Switches the rtc back to bank 0.
163 * - Clears the SET bit in Control Register B.
164 */
165static inline void
166ds1685_rtc_end_data_access(struct ds1685_priv *rtc)
167{
168 /* Switch back to Bank 0 */
169 ds1685_rtc_switch_to_bank1(rtc);
170
171 /* Clear the SET bit in Ctrl B */
172 rtc->write(rtc, RTC_CTRL_B,
173 (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
174}
175
176/**
177 * ds1685_rtc_begin_ctrl_access - prepare the rtc for ctrl access.
178 * @rtc: pointer to the ds1685 rtc structure.
179 * @flags: irq flags variable for spin_lock_irqsave.
180 *
181 * This takes several steps to prepare the rtc for access to read just the
182 * control registers:
183 * - Sets a spinlock on the rtc IRQ.
184 * - Switches the rtc to bank 1. This allows access to the two extended
185 * control registers.
186 *
187 * Only use this where you are certain another lock will not be held.
188 */
189static inline void
190ds1685_rtc_begin_ctrl_access(struct ds1685_priv *rtc, unsigned long *flags)
191{
192 spin_lock_irqsave(&rtc->lock, *flags);
193 ds1685_rtc_switch_to_bank1(rtc);
194}
195
196/**
197 * ds1685_rtc_end_ctrl_access - end ctrl access on the rtc.
198 * @rtc: pointer to the ds1685 rtc structure.
199 * @flags: irq flags variable for spin_unlock_irqrestore.
200 *
201 * This ends what was started by ds1685_rtc_begin_ctrl_access:
202 * - Switches the rtc back to bank 0.
203 * - Unsets the spinlock on the rtc IRQ.
204 */
205static inline void
206ds1685_rtc_end_ctrl_access(struct ds1685_priv *rtc, unsigned long flags)
207{
208 ds1685_rtc_switch_to_bank0(rtc);
209 spin_unlock_irqrestore(&rtc->lock, flags);
210}
211
212/**
213 * ds1685_rtc_get_ssn - retrieve the silicon serial number.
214 * @rtc: pointer to the ds1685 rtc structure.
215 * @ssn: u8 array to hold the bits of the silicon serial number.
216 *
217 * This number starts at 0x40, and is 8-bytes long, ending at 0x47. The
218 * first byte is the model number, the next six bytes are the serial number
219 * digits, and the final byte is a CRC check byte. Together, they form the
220 * silicon serial number.
221 *
222 * These values are stored in bank1, so ds1685_rtc_switch_to_bank1 must be
223 * called first before calling this function, else data will be read out of
224 * the bank0 NVRAM. Be sure to call ds1685_rtc_switch_to_bank0 when done.
225 */
226static inline void
227ds1685_rtc_get_ssn(struct ds1685_priv *rtc, u8 *ssn)
228{
229 ssn[0] = rtc->read(rtc, RTC_BANK1_SSN_MODEL);
230 ssn[1] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_1);
231 ssn[2] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_2);
232 ssn[3] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_3);
233 ssn[4] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_4);
234 ssn[5] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_5);
235 ssn[6] = rtc->read(rtc, RTC_BANK1_SSN_BYTE_6);
236 ssn[7] = rtc->read(rtc, RTC_BANK1_SSN_CRC);
237}
238/* ----------------------------------------------------------------------- */
239
240
241/* ----------------------------------------------------------------------- */
242/* Read/Set Time & Alarm functions */
243
244/**
245 * ds1685_rtc_read_time - reads the time registers.
246 * @dev: pointer to device structure.
247 * @tm: pointer to rtc_time structure.
248 */
249static int
250ds1685_rtc_read_time(struct device *dev, struct rtc_time *tm)
251{
252 struct platform_device *pdev = to_platform_device(dev);
253 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
254 u8 ctrlb, century;
255 u8 seconds, minutes, hours, wday, mday, month, years;
256
257 /* Fetch the time info from the RTC registers. */
258 ds1685_rtc_begin_data_access(rtc);
259 seconds = rtc->read(rtc, RTC_SECS);
260 minutes = rtc->read(rtc, RTC_MINS);
261 hours = rtc->read(rtc, RTC_HRS);
262 wday = rtc->read(rtc, RTC_WDAY);
263 mday = rtc->read(rtc, RTC_MDAY);
264 month = rtc->read(rtc, RTC_MONTH);
265 years = rtc->read(rtc, RTC_YEAR);
266 century = rtc->read(rtc, RTC_CENTURY);
267 ctrlb = rtc->read(rtc, RTC_CTRL_B);
268 ds1685_rtc_end_data_access(rtc);
269
270 /* bcd2bin if needed, perform fixups, and store to rtc_time. */
271 years = ds1685_rtc_bcd2bin(rtc, years, RTC_YEAR_BCD_MASK,
272 RTC_YEAR_BIN_MASK);
273 century = ds1685_rtc_bcd2bin(rtc, century, RTC_CENTURY_MASK,
274 RTC_CENTURY_MASK);
275 tm->tm_sec = ds1685_rtc_bcd2bin(rtc, seconds, RTC_SECS_BCD_MASK,
276 RTC_SECS_BIN_MASK);
277 tm->tm_min = ds1685_rtc_bcd2bin(rtc, minutes, RTC_MINS_BCD_MASK,
278 RTC_MINS_BIN_MASK);
279 tm->tm_hour = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_24_BCD_MASK,
280 RTC_HRS_24_BIN_MASK);
281 tm->tm_wday = (ds1685_rtc_bcd2bin(rtc, wday, RTC_WDAY_MASK,
282 RTC_WDAY_MASK) - 1);
283 tm->tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
284 RTC_MDAY_BIN_MASK);
285 tm->tm_mon = (ds1685_rtc_bcd2bin(rtc, month, RTC_MONTH_BCD_MASK,
286 RTC_MONTH_BIN_MASK) - 1);
287 tm->tm_year = ((years + (century * 100)) - 1900);
288 tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
289 tm->tm_isdst = 0; /* RTC has hardcoded timezone, so don't use. */
290
291 return rtc_valid_tm(tm);
292}
293
294/**
295 * ds1685_rtc_set_time - sets the time registers.
296 * @dev: pointer to device structure.
297 * @tm: pointer to rtc_time structure.
298 */
299static int
300ds1685_rtc_set_time(struct device *dev, struct rtc_time *tm)
301{
302 struct platform_device *pdev = to_platform_device(dev);
303 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
304 u8 ctrlb, seconds, minutes, hours, wday, mday, month, years, century;
305
306 /* Fetch the time info from rtc_time. */
307 seconds = ds1685_rtc_bin2bcd(rtc, tm->tm_sec, RTC_SECS_BIN_MASK,
308 RTC_SECS_BCD_MASK);
309 minutes = ds1685_rtc_bin2bcd(rtc, tm->tm_min, RTC_MINS_BIN_MASK,
310 RTC_MINS_BCD_MASK);
311 hours = ds1685_rtc_bin2bcd(rtc, tm->tm_hour, RTC_HRS_24_BIN_MASK,
312 RTC_HRS_24_BCD_MASK);
313 wday = ds1685_rtc_bin2bcd(rtc, (tm->tm_wday + 1), RTC_WDAY_MASK,
314 RTC_WDAY_MASK);
315 mday = ds1685_rtc_bin2bcd(rtc, tm->tm_mday, RTC_MDAY_BIN_MASK,
316 RTC_MDAY_BCD_MASK);
317 month = ds1685_rtc_bin2bcd(rtc, (tm->tm_mon + 1), RTC_MONTH_BIN_MASK,
318 RTC_MONTH_BCD_MASK);
319 years = ds1685_rtc_bin2bcd(rtc, (tm->tm_year % 100),
320 RTC_YEAR_BIN_MASK, RTC_YEAR_BCD_MASK);
321 century = ds1685_rtc_bin2bcd(rtc, ((tm->tm_year + 1900) / 100),
322 RTC_CENTURY_MASK, RTC_CENTURY_MASK);
323
324 /*
325 * Perform Sanity Checks:
326 * - Months: !> 12, Month Day != 0.
327 * - Month Day !> Max days in current month.
328 * - Hours !>= 24, Mins !>= 60, Secs !>= 60, & Weekday !> 7.
329 */
330 if ((tm->tm_mon > 11) || (mday == 0))
331 return -EDOM;
332
333 if (tm->tm_mday > rtc_month_days(tm->tm_mon, tm->tm_year))
334 return -EDOM;
335
336 if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) ||
337 (tm->tm_sec >= 60) || (wday > 7))
338 return -EDOM;
339
340 /*
341 * Set the data mode to use and store the time values in the
342 * RTC registers.
343 */
344 ds1685_rtc_begin_data_access(rtc);
345 ctrlb = rtc->read(rtc, RTC_CTRL_B);
346 if (rtc->bcd_mode)
347 ctrlb &= ~(RTC_CTRL_B_DM);
348 else
349 ctrlb |= RTC_CTRL_B_DM;
350 rtc->write(rtc, RTC_CTRL_B, ctrlb);
351 rtc->write(rtc, RTC_SECS, seconds);
352 rtc->write(rtc, RTC_MINS, minutes);
353 rtc->write(rtc, RTC_HRS, hours);
354 rtc->write(rtc, RTC_WDAY, wday);
355 rtc->write(rtc, RTC_MDAY, mday);
356 rtc->write(rtc, RTC_MONTH, month);
357 rtc->write(rtc, RTC_YEAR, years);
358 rtc->write(rtc, RTC_CENTURY, century);
359 ds1685_rtc_end_data_access(rtc);
360
361 return 0;
362}
363
364/**
365 * ds1685_rtc_read_alarm - reads the alarm registers.
366 * @dev: pointer to device structure.
367 * @alrm: pointer to rtc_wkalrm structure.
368 *
369 * There are three primary alarm registers: seconds, minutes, and hours.
370 * A fourth alarm register for the month date is also available in bank1 for
371 * kickstart/wakeup features. The DS1685/DS1687 manual states that a
372 * "don't care" value ranging from 0xc0 to 0xff may be written into one or
373 * more of the three alarm bytes to act as a wildcard value. The fourth
374 * byte doesn't support a "don't care" value.
375 */
376static int
377ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
378{
379 struct platform_device *pdev = to_platform_device(dev);
380 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
381 u8 seconds, minutes, hours, mday, ctrlb, ctrlc;
382
383 /* Fetch the alarm info from the RTC alarm registers. */
384 ds1685_rtc_begin_data_access(rtc);
385 seconds = rtc->read(rtc, RTC_SECS_ALARM);
386 minutes = rtc->read(rtc, RTC_MINS_ALARM);
387 hours = rtc->read(rtc, RTC_HRS_ALARM);
388 mday = rtc->read(rtc, RTC_MDAY_ALARM);
389 ctrlb = rtc->read(rtc, RTC_CTRL_B);
390 ctrlc = rtc->read(rtc, RTC_CTRL_C);
391 ds1685_rtc_end_data_access(rtc);
392
393 /* Check month date. */
394 if (!(mday >= 1) && (mday <= 31))
395 return -EDOM;
396
397 /*
398 * Check the three alarm bytes.
399 *
400 * The Linux RTC system doesn't support the "don't care" capability
401 * of this RTC chip. We check for it anyways in case support is
402 * added in the future.
403 */
404 if (unlikely(seconds >= 0xc0))
405 alrm->time.tm_sec = -1;
406 else
407 alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds,
408 RTC_SECS_BCD_MASK,
409 RTC_SECS_BIN_MASK);
410
411 if (unlikely(minutes >= 0xc0))
412 alrm->time.tm_min = -1;
413 else
414 alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes,
415 RTC_MINS_BCD_MASK,
416 RTC_MINS_BIN_MASK);
417
418 if (unlikely(hours >= 0xc0))
419 alrm->time.tm_hour = -1;
420 else
421 alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours,
422 RTC_HRS_24_BCD_MASK,
423 RTC_HRS_24_BIN_MASK);
424
425 /* Write the data to rtc_wkalrm. */
426 alrm->time.tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK,
427 RTC_MDAY_BIN_MASK);
428 alrm->time.tm_mon = -1;
429 alrm->time.tm_year = -1;
430 alrm->time.tm_wday = -1;
431 alrm->time.tm_yday = -1;
432 alrm->time.tm_isdst = -1;
433 alrm->enabled = !!(ctrlb & RTC_CTRL_B_AIE);
434 alrm->pending = !!(ctrlc & RTC_CTRL_C_AF);
435
436 return 0;
437}
438
439/**
440 * ds1685_rtc_set_alarm - sets the alarm in registers.
441 * @dev: pointer to device structure.
442 * @alrm: pointer to rtc_wkalrm structure.
443 */
444static int
445ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
446{
447 struct platform_device *pdev = to_platform_device(dev);
448 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
449 u8 ctrlb, seconds, minutes, hours, mday;
450
451 /* Fetch the alarm info and convert to BCD. */
452 seconds = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_sec,
453 RTC_SECS_BIN_MASK,
454 RTC_SECS_BCD_MASK);
455 minutes = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_min,
456 RTC_MINS_BIN_MASK,
457 RTC_MINS_BCD_MASK);
458 hours = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_hour,
459 RTC_HRS_24_BIN_MASK,
460 RTC_HRS_24_BCD_MASK);
461 mday = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_mday,
462 RTC_MDAY_BIN_MASK,
463 RTC_MDAY_BCD_MASK);
464
465 /* Check the month date for validity. */
466 if (!(mday >= 1) && (mday <= 31))
467 return -EDOM;
468
469 /*
470 * Check the three alarm bytes.
471 *
472 * The Linux RTC system doesn't support the "don't care" capability
473 * of this RTC chip because rtc_valid_tm tries to validate every
474 * field, and we only support four fields. We put the support
475 * here anyways for the future.
476 */
477 if (unlikely(seconds >= 0xc0))
478 seconds = 0xff;
479
480 if (unlikely(minutes >= 0xc0))
481 minutes = 0xff;
482
483 if (unlikely(hours >= 0xc0))
484 hours = 0xff;
485
486 alrm->time.tm_mon = -1;
487 alrm->time.tm_year = -1;
488 alrm->time.tm_wday = -1;
489 alrm->time.tm_yday = -1;
490 alrm->time.tm_isdst = -1;
491
492 /* Disable the alarm interrupt first. */
493 ds1685_rtc_begin_data_access(rtc);
494 ctrlb = rtc->read(rtc, RTC_CTRL_B);
495 rtc->write(rtc, RTC_CTRL_B, (ctrlb & ~(RTC_CTRL_B_AIE)));
496
497 /* Read ctrlc to clear RTC_CTRL_C_AF. */
498 rtc->read(rtc, RTC_CTRL_C);
499
500 /*
501 * Set the data mode to use and store the time values in the
502 * RTC registers.
503 */
504 ctrlb = rtc->read(rtc, RTC_CTRL_B);
505 if (rtc->bcd_mode)
506 ctrlb &= ~(RTC_CTRL_B_DM);
507 else
508 ctrlb |= RTC_CTRL_B_DM;
509 rtc->write(rtc, RTC_CTRL_B, ctrlb);
510 rtc->write(rtc, RTC_SECS_ALARM, seconds);
511 rtc->write(rtc, RTC_MINS_ALARM, minutes);
512 rtc->write(rtc, RTC_HRS_ALARM, hours);
513 rtc->write(rtc, RTC_MDAY_ALARM, mday);
514
515 /* Re-enable the alarm if needed. */
516 if (alrm->enabled) {
517 ctrlb = rtc->read(rtc, RTC_CTRL_B);
518 ctrlb |= RTC_CTRL_B_AIE;
519 rtc->write(rtc, RTC_CTRL_B, ctrlb);
520 }
521
522 /* Done! */
523 ds1685_rtc_end_data_access(rtc);
524
525 return 0;
526}
527/* ----------------------------------------------------------------------- */
528
529
530/* ----------------------------------------------------------------------- */
531/* /dev/rtcX Interface functions */
532
533/**
534 * ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off.
535 * @dev: pointer to device structure.
536 * @enabled: flag indicating whether to enable or disable.
537 */
538static int
539ds1685_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
540{
541 struct ds1685_priv *rtc = dev_get_drvdata(dev);
542 unsigned long flags = 0;
543
544 /* Enable/disable the Alarm IRQ-Enable flag. */
545 spin_lock_irqsave(&rtc->lock, flags);
546
547 /* Flip the requisite interrupt-enable bit. */
548 if (enabled)
549 rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) |
550 RTC_CTRL_B_AIE));
551 else
552 rtc->write(rtc, RTC_CTRL_B, (rtc->read(rtc, RTC_CTRL_B) &
553 ~(RTC_CTRL_B_AIE)));
554
555 /* Read Control C to clear all the flag bits. */
556 rtc->read(rtc, RTC_CTRL_C);
557 spin_unlock_irqrestore(&rtc->lock, flags);
558
559 return 0;
560}
561/* ----------------------------------------------------------------------- */
562
563
564/* ----------------------------------------------------------------------- */
565/* IRQ handler & workqueue. */
566
567/**
568 * ds1685_rtc_irq_handler - IRQ handler.
569 * @irq: IRQ number.
570 * @dev_id: platform device pointer.
571 */
572static irqreturn_t
573ds1685_rtc_irq_handler(int irq, void *dev_id)
574{
575 struct platform_device *pdev = dev_id;
576 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
577 u8 ctrlb, ctrlc;
578 unsigned long events = 0;
579 u8 num_irqs = 0;
580
581 /* Abort early if the device isn't ready yet (i.e., DEBUG_SHIRQ). */
582 if (unlikely(!rtc))
583 return IRQ_HANDLED;
584
585 /* Ctrlb holds the interrupt-enable bits and ctrlc the flag bits. */
586 spin_lock(&rtc->lock);
587 ctrlb = rtc->read(rtc, RTC_CTRL_B);
588 ctrlc = rtc->read(rtc, RTC_CTRL_C);
589
590 /* Is the IRQF bit set? */
591 if (likely(ctrlc & RTC_CTRL_C_IRQF)) {
592 /*
593 * We need to determine if it was one of the standard
594 * events: PF, AF, or UF. If so, we handle them and
595 * update the RTC core.
596 */
597 if (likely(ctrlc & RTC_CTRL_B_PAU_MASK)) {
598 events = RTC_IRQF;
599
600 /* Check for a periodic interrupt. */
601 if ((ctrlb & RTC_CTRL_B_PIE) &&
602 (ctrlc & RTC_CTRL_C_PF)) {
603 events |= RTC_PF;
604 num_irqs++;
605 }
606
607 /* Check for an alarm interrupt. */
608 if ((ctrlb & RTC_CTRL_B_AIE) &&
609 (ctrlc & RTC_CTRL_C_AF)) {
610 events |= RTC_AF;
611 num_irqs++;
612 }
613
614 /* Check for an update interrupt. */
615 if ((ctrlb & RTC_CTRL_B_UIE) &&
616 (ctrlc & RTC_CTRL_C_UF)) {
617 events |= RTC_UF;
618 num_irqs++;
619 }
620
621 rtc_update_irq(rtc->dev, num_irqs, events);
622 } else {
623 /*
624 * One of the "extended" interrupts was received that
625 * is not recognized by the RTC core. These need to
626 * be handled in task context as they can call other
627 * functions and the time spent in irq context needs
628 * to be minimized. Schedule them into a workqueue
629 * and inform the RTC core that the IRQs were handled.
630 */
631 spin_unlock(&rtc->lock);
632 schedule_work(&rtc->work);
633 rtc_update_irq(rtc->dev, 0, 0);
634 return IRQ_HANDLED;
635 }
636 }
637 spin_unlock(&rtc->lock);
638
639 return events ? IRQ_HANDLED : IRQ_NONE;
640}
641
642/**
643 * ds1685_rtc_work_queue - work queue handler.
644 * @work: work_struct containing data to work on in task context.
645 */
646static void
647ds1685_rtc_work_queue(struct work_struct *work)
648{
649 struct ds1685_priv *rtc = container_of(work,
650 struct ds1685_priv, work);
651 struct platform_device *pdev = to_platform_device(&rtc->dev->dev);
652 struct mutex *rtc_mutex = &rtc->dev->ops_lock;
653 u8 ctrl4a, ctrl4b;
654
655 mutex_lock(rtc_mutex);
656
657 ds1685_rtc_switch_to_bank1(rtc);
658 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
659 ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
660
661 /*
662 * Check for a kickstart interrupt. With Vcc applied, this
663 * typically means that the power button was pressed, so we
664 * begin the shutdown sequence.
665 */
666 if ((ctrl4b & RTC_CTRL_4B_KSE) && (ctrl4a & RTC_CTRL_4A_KF)) {
667 /* Briefly disable kickstarts to debounce button presses. */
668 rtc->write(rtc, RTC_EXT_CTRL_4B,
669 (rtc->read(rtc, RTC_EXT_CTRL_4B) &
670 ~(RTC_CTRL_4B_KSE)));
671
672 /* Clear the kickstart flag. */
673 rtc->write(rtc, RTC_EXT_CTRL_4A,
674 (ctrl4a & ~(RTC_CTRL_4A_KF)));
675
676
677 /*
678 * Sleep 500ms before re-enabling kickstarts. This allows
679 * adequate time to avoid reading signal jitter as additional
680 * button presses.
681 */
682 msleep(500);
683 rtc->write(rtc, RTC_EXT_CTRL_4B,
684 (rtc->read(rtc, RTC_EXT_CTRL_4B) |
685 RTC_CTRL_4B_KSE));
686
687 /* Call the platform pre-poweroff function. Else, shutdown. */
688 if (rtc->prepare_poweroff != NULL)
689 rtc->prepare_poweroff();
690 else
691 ds1685_rtc_poweroff(pdev);
692 }
693
694 /*
695 * Check for a wake-up interrupt. With Vcc applied, this is
696 * essentially a second alarm interrupt, except it takes into
697 * account the 'date' register in bank1 in addition to the
698 * standard three alarm registers.
699 */
700 if ((ctrl4b & RTC_CTRL_4B_WIE) && (ctrl4a & RTC_CTRL_4A_WF)) {
701 rtc->write(rtc, RTC_EXT_CTRL_4A,
702 (ctrl4a & ~(RTC_CTRL_4A_WF)));
703
704 /* Call the platform wake_alarm function if defined. */
705 if (rtc->wake_alarm != NULL)
706 rtc->wake_alarm();
707 else
708 dev_warn(&pdev->dev,
709 "Wake Alarm IRQ just occurred!\n");
710 }
711
712 /*
713 * Check for a ram-clear interrupt. This happens if RIE=1 and RF=0
714 * when RCE=1 in 4B. This clears all NVRAM bytes in bank0 by setting
715 * each byte to a logic 1. This has no effect on any extended
716 * NV-SRAM that might be present, nor on the time/calendar/alarm
717 * registers. After a ram-clear is completed, there is a minimum
718 * recovery time of ~150ms in which all reads/writes are locked out.
719 * NOTE: A ram-clear can still occur if RCE=1 and RIE=0. We cannot
720 * catch this scenario.
721 */
722 if ((ctrl4b & RTC_CTRL_4B_RIE) && (ctrl4a & RTC_CTRL_4A_RF)) {
723 rtc->write(rtc, RTC_EXT_CTRL_4A,
724 (ctrl4a & ~(RTC_CTRL_4A_RF)));
725 msleep(150);
726
727 /* Call the platform post_ram_clear function if defined. */
728 if (rtc->post_ram_clear != NULL)
729 rtc->post_ram_clear();
730 else
731 dev_warn(&pdev->dev,
732 "RAM-Clear IRQ just occurred!\n");
733 }
734 ds1685_rtc_switch_to_bank0(rtc);
735
736 mutex_unlock(rtc_mutex);
737}
738/* ----------------------------------------------------------------------- */
739
740
741/* ----------------------------------------------------------------------- */
742/* ProcFS interface */
743
744#ifdef CONFIG_PROC_FS
745#define NUM_REGS 6 /* Num of control registers. */
746#define NUM_BITS 8 /* Num bits per register. */
747#define NUM_SPACES 4 /* Num spaces between each bit. */
748
749/*
750 * Periodic Interrupt Rates.
751 */
752static const char *ds1685_rtc_pirq_rate[16] = {
753 "none", "3.90625ms", "7.8125ms", "0.122070ms", "0.244141ms",
754 "0.488281ms", "0.9765625ms", "1.953125ms", "3.90625ms", "7.8125ms",
755 "15.625ms", "31.25ms", "62.5ms", "125ms", "250ms", "500ms"
756};
757
758/*
759 * Square-Wave Output Frequencies.
760 */
761static const char *ds1685_rtc_sqw_freq[16] = {
762 "none", "256Hz", "128Hz", "8192Hz", "4096Hz", "2048Hz", "1024Hz",
763 "512Hz", "256Hz", "128Hz", "64Hz", "32Hz", "16Hz", "8Hz", "4Hz", "2Hz"
764};
765
766#ifdef CONFIG_RTC_DS1685_PROC_REGS
767/**
768 * ds1685_rtc_print_regs - helper function to print register values.
769 * @hex: hex byte to convert into binary bits.
770 * @dest: destination char array.
771 *
772 * This is basically a hex->binary function, just with extra spacing between
773 * the digits. It only works on 1-byte values (8 bits).
774 */
775static char*
776ds1685_rtc_print_regs(u8 hex, char *dest)
777{
778 u32 i, j;
779 char *tmp = dest;
780
781 for (i = 0; i < NUM_BITS; i++) {
782 *tmp++ = ((hex & 0x80) != 0 ? '1' : '0');
783 for (j = 0; j < NUM_SPACES; j++)
784 *tmp++ = ' ';
785 hex <<= 1;
786 }
787 *tmp++ = '\0';
788
789 return dest;
790}
791#endif
792
793/**
794 * ds1685_rtc_proc - procfs access function.
795 * @dev: pointer to device structure.
796 * @seq: pointer to seq_file structure.
797 */
798static int
799ds1685_rtc_proc(struct device *dev, struct seq_file *seq)
800{
801 struct platform_device *pdev = to_platform_device(dev);
802 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
803 u8 ctrla, ctrlb, ctrlc, ctrld, ctrl4a, ctrl4b, ssn[8];
804 char *model;
805#ifdef CONFIG_RTC_DS1685_PROC_REGS
806 char bits[NUM_REGS][(NUM_BITS * NUM_SPACES) + NUM_BITS + 1];
807#endif
808
809 /* Read all the relevant data from the control registers. */
810 ds1685_rtc_switch_to_bank1(rtc);
811 ds1685_rtc_get_ssn(rtc, ssn);
812 ctrla = rtc->read(rtc, RTC_CTRL_A);
813 ctrlb = rtc->read(rtc, RTC_CTRL_B);
814 ctrlc = rtc->read(rtc, RTC_CTRL_C);
815 ctrld = rtc->read(rtc, RTC_CTRL_D);
816 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
817 ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
818 ds1685_rtc_switch_to_bank0(rtc);
819
820 /* Determine the RTC model. */
821 switch (ssn[0]) {
822 case RTC_MODEL_DS1685:
823 model = "DS1685/DS1687\0";
824 break;
825 case RTC_MODEL_DS1689:
826 model = "DS1689/DS1693\0";
827 break;
828 case RTC_MODEL_DS17285:
829 model = "DS17285/DS17287\0";
830 break;
831 case RTC_MODEL_DS17485:
832 model = "DS17485/DS17487\0";
833 break;
834 case RTC_MODEL_DS17885:
835 model = "DS17885/DS17887\0";
836 break;
837 default:
838 model = "Unknown\0";
839 break;
840 }
841
842 /* Print out the information. */
843 seq_printf(seq,
844 "Model\t\t: %s\n"
845 "Oscillator\t: %s\n"
846 "12/24hr\t\t: %s\n"
847 "DST\t\t: %s\n"
848 "Data mode\t: %s\n"
849 "Battery\t\t: %s\n"
850 "Aux batt\t: %s\n"
851 "Update IRQ\t: %s\n"
852 "Periodic IRQ\t: %s\n"
853 "Periodic Rate\t: %s\n"
854 "SQW Freq\t: %s\n"
855#ifdef CONFIG_RTC_DS1685_PROC_REGS
856 "Serial #\t: %8phC\n"
857 "Register Status\t:\n"
858 " Ctrl A\t: UIP DV2 DV1 DV0 RS3 RS2 RS1 RS0\n"
859 "\t\t: %s\n"
860 " Ctrl B\t: SET PIE AIE UIE SQWE DM 2412 DSE\n"
861 "\t\t: %s\n"
862 " Ctrl C\t: IRQF PF AF UF --- --- --- ---\n"
863 "\t\t: %s\n"
864 " Ctrl D\t: VRT --- --- --- --- --- --- ---\n"
865 "\t\t: %s\n"
866#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
867 " Ctrl 4A\t: VRT2 INCR BME --- PAB RF WF KF\n"
868#else
869 " Ctrl 4A\t: VRT2 INCR --- --- PAB RF WF KF\n"
870#endif
871 "\t\t: %s\n"
872 " Ctrl 4B\t: ABE E32k CS RCE PRS RIE WIE KSE\n"
873 "\t\t: %s\n",
874#else
875 "Serial #\t: %8phC\n",
876#endif
877 model,
878 ((ctrla & RTC_CTRL_A_DV1) ? "enabled" : "disabled"),
879 ((ctrlb & RTC_CTRL_B_2412) ? "24-hour" : "12-hour"),
880 ((ctrlb & RTC_CTRL_B_DSE) ? "enabled" : "disabled"),
881 ((ctrlb & RTC_CTRL_B_DM) ? "binary" : "BCD"),
882 ((ctrld & RTC_CTRL_D_VRT) ? "ok" : "exhausted or n/a"),
883 ((ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "exhausted or n/a"),
884 ((ctrlb & RTC_CTRL_B_UIE) ? "yes" : "no"),
885 ((ctrlb & RTC_CTRL_B_PIE) ? "yes" : "no"),
886 (!(ctrl4b & RTC_CTRL_4B_E32K) ?
887 ds1685_rtc_pirq_rate[(ctrla & RTC_CTRL_A_RS_MASK)] : "none"),
888 (!((ctrl4b & RTC_CTRL_4B_E32K)) ?
889 ds1685_rtc_sqw_freq[(ctrla & RTC_CTRL_A_RS_MASK)] : "32768Hz"),
890#ifdef CONFIG_RTC_DS1685_PROC_REGS
891 ssn,
892 ds1685_rtc_print_regs(ctrla, bits[0]),
893 ds1685_rtc_print_regs(ctrlb, bits[1]),
894 ds1685_rtc_print_regs(ctrlc, bits[2]),
895 ds1685_rtc_print_regs(ctrld, bits[3]),
896 ds1685_rtc_print_regs(ctrl4a, bits[4]),
897 ds1685_rtc_print_regs(ctrl4b, bits[5]));
898#else
899 ssn);
900#endif
901 return 0;
902}
903#else
904#define ds1685_rtc_proc NULL
905#endif /* CONFIG_PROC_FS */
906/* ----------------------------------------------------------------------- */
907
908
909/* ----------------------------------------------------------------------- */
910/* RTC Class operations */
911
912static const struct rtc_class_ops
913ds1685_rtc_ops = {
914 .proc = ds1685_rtc_proc,
915 .read_time = ds1685_rtc_read_time,
916 .set_time = ds1685_rtc_set_time,
917 .read_alarm = ds1685_rtc_read_alarm,
918 .set_alarm = ds1685_rtc_set_alarm,
919 .alarm_irq_enable = ds1685_rtc_alarm_irq_enable,
920};
921/* ----------------------------------------------------------------------- */
922
923
924/* ----------------------------------------------------------------------- */
925/* SysFS interface */
926
927#ifdef CONFIG_SYSFS
928/**
929 * ds1685_rtc_sysfs_nvram_read - reads rtc nvram via sysfs.
930 * @file: pointer to file structure.
931 * @kobj: pointer to kobject structure.
932 * @bin_attr: pointer to bin_attribute structure.
933 * @buf: pointer to char array to hold the output.
934 * @pos: current file position pointer.
935 * @size: size of the data to read.
936 */
937static ssize_t
938ds1685_rtc_sysfs_nvram_read(struct file *filp, struct kobject *kobj,
939 struct bin_attribute *bin_attr, char *buf,
940 loff_t pos, size_t size)
941{
942 struct platform_device *pdev =
943 to_platform_device(container_of(kobj, struct device, kobj));
944 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
945 ssize_t count;
946 unsigned long flags = 0;
947
948 spin_lock_irqsave(&rtc->lock, flags);
949 ds1685_rtc_switch_to_bank0(rtc);
950
951 /* Read NVRAM in time and bank0 registers. */
952 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
953 count++, size--) {
954 if (count < NVRAM_SZ_TIME)
955 *buf++ = rtc->read(rtc, (NVRAM_TIME_BASE + pos++));
956 else
957 *buf++ = rtc->read(rtc, (NVRAM_BANK0_BASE + pos++));
958 }
959
960#ifndef CONFIG_RTC_DRV_DS1689
961 if (size > 0) {
962 ds1685_rtc_switch_to_bank1(rtc);
963
964#ifndef CONFIG_RTC_DRV_DS1685
965 /* Enable burst-mode on DS17x85/DS17x87 */
966 rtc->write(rtc, RTC_EXT_CTRL_4A,
967 (rtc->read(rtc, RTC_EXT_CTRL_4A) |
968 RTC_CTRL_4A_BME));
969
970 /* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
971 * reading with burst-mode */
972 rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
973 (pos - NVRAM_TOTAL_SZ_BANK0));
974#endif
975
976 /* Read NVRAM in bank1 registers. */
977 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
978 count++, size--) {
979#ifdef CONFIG_RTC_DRV_DS1685
980 /* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
981 * before each read. */
982 rtc->write(rtc, RTC_BANK1_RAM_ADDR,
983 (pos - NVRAM_TOTAL_SZ_BANK0));
984#endif
985 *buf++ = rtc->read(rtc, RTC_BANK1_RAM_DATA_PORT);
986 pos++;
987 }
988
989#ifndef CONFIG_RTC_DRV_DS1685
990 /* Disable burst-mode on DS17x85/DS17x87 */
991 rtc->write(rtc, RTC_EXT_CTRL_4A,
992 (rtc->read(rtc, RTC_EXT_CTRL_4A) &
993 ~(RTC_CTRL_4A_BME)));
994#endif
995 ds1685_rtc_switch_to_bank0(rtc);
996 }
997#endif /* !CONFIG_RTC_DRV_DS1689 */
998 spin_unlock_irqrestore(&rtc->lock, flags);
999
1000 /*
1001 * XXX: Bug? this appears to cause the function to get executed
1002 * several times in succession. But it's the only way to actually get
1003 * data written out to a file.
1004 */
1005 return count;
1006}
1007
1008/**
1009 * ds1685_rtc_sysfs_nvram_write - writes rtc nvram via sysfs.
1010 * @file: pointer to file structure.
1011 * @kobj: pointer to kobject structure.
1012 * @bin_attr: pointer to bin_attribute structure.
1013 * @buf: pointer to char array to hold the input.
1014 * @pos: current file position pointer.
1015 * @size: size of the data to write.
1016 */
1017static ssize_t
1018ds1685_rtc_sysfs_nvram_write(struct file *filp, struct kobject *kobj,
1019 struct bin_attribute *bin_attr, char *buf,
1020 loff_t pos, size_t size)
1021{
1022 struct platform_device *pdev =
1023 to_platform_device(container_of(kobj, struct device, kobj));
1024 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1025 ssize_t count;
1026 unsigned long flags = 0;
1027
1028 spin_lock_irqsave(&rtc->lock, flags);
1029 ds1685_rtc_switch_to_bank0(rtc);
1030
1031 /* Write NVRAM in time and bank0 registers. */
1032 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ_BANK0;
1033 count++, size--)
1034 if (count < NVRAM_SZ_TIME)
1035 rtc->write(rtc, (NVRAM_TIME_BASE + pos++),
1036 *buf++);
1037 else
1038 rtc->write(rtc, (NVRAM_BANK0_BASE), *buf++);
1039
1040#ifndef CONFIG_RTC_DRV_DS1689
1041 if (size > 0) {
1042 ds1685_rtc_switch_to_bank1(rtc);
1043
1044#ifndef CONFIG_RTC_DRV_DS1685
1045 /* Enable burst-mode on DS17x85/DS17x87 */
1046 rtc->write(rtc, RTC_EXT_CTRL_4A,
1047 (rtc->read(rtc, RTC_EXT_CTRL_4A) |
1048 RTC_CTRL_4A_BME));
1049
1050 /* We need one write to RTC_BANK1_RAM_ADDR_LSB to start
1051 * writing with burst-mode */
1052 rtc->write(rtc, RTC_BANK1_RAM_ADDR_LSB,
1053 (pos - NVRAM_TOTAL_SZ_BANK0));
1054#endif
1055
1056 /* Write NVRAM in bank1 registers. */
1057 for (count = 0; size > 0 && pos < NVRAM_TOTAL_SZ;
1058 count++, size--) {
1059#ifdef CONFIG_RTC_DRV_DS1685
1060 /* DS1685/DS1687 has to write to RTC_BANK1_RAM_ADDR
1061 * before each read. */
1062 rtc->write(rtc, RTC_BANK1_RAM_ADDR,
1063 (pos - NVRAM_TOTAL_SZ_BANK0));
1064#endif
1065 rtc->write(rtc, RTC_BANK1_RAM_DATA_PORT, *buf++);
1066 pos++;
1067 }
1068
1069#ifndef CONFIG_RTC_DRV_DS1685
1070 /* Disable burst-mode on DS17x85/DS17x87 */
1071 rtc->write(rtc, RTC_EXT_CTRL_4A,
1072 (rtc->read(rtc, RTC_EXT_CTRL_4A) &
1073 ~(RTC_CTRL_4A_BME)));
1074#endif
1075 ds1685_rtc_switch_to_bank0(rtc);
1076 }
1077#endif /* !CONFIG_RTC_DRV_DS1689 */
1078 spin_unlock_irqrestore(&rtc->lock, flags);
1079
1080 return count;
1081}
1082
1083/**
1084 * struct ds1685_rtc_sysfs_nvram_attr - sysfs attributes for rtc nvram.
1085 * @attr: nvram attributes.
1086 * @read: nvram read function.
1087 * @write: nvram write function.
1088 * @size: nvram total size (bank0 + extended).
1089 */
1090static struct bin_attribute
1091ds1685_rtc_sysfs_nvram_attr = {
1092 .attr = {
1093 .name = "nvram",
1094 .mode = S_IRUGO | S_IWUSR,
1095 },
1096 .read = ds1685_rtc_sysfs_nvram_read,
1097 .write = ds1685_rtc_sysfs_nvram_write,
1098 .size = NVRAM_TOTAL_SZ
1099};
1100
1101/**
1102 * ds1685_rtc_sysfs_battery_show - sysfs file for main battery status.
1103 * @dev: pointer to device structure.
1104 * @attr: pointer to device_attribute structure.
1105 * @buf: pointer to char array to hold the output.
1106 */
1107static ssize_t
1108ds1685_rtc_sysfs_battery_show(struct device *dev,
1109 struct device_attribute *attr, char *buf)
1110{
1111 struct platform_device *pdev = to_platform_device(dev);
1112 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1113 u8 ctrld;
1114
1115 ctrld = rtc->read(rtc, RTC_CTRL_D);
1116
1117 return sprintf(buf, "%s\n",
1118 (ctrld & RTC_CTRL_D_VRT) ? "ok" : "not ok or N/A");
1119}
1120static DEVICE_ATTR(battery, S_IRUGO, ds1685_rtc_sysfs_battery_show, NULL);
1121
1122/**
1123 * ds1685_rtc_sysfs_auxbatt_show - sysfs file for aux battery status.
1124 * @dev: pointer to device structure.
1125 * @attr: pointer to device_attribute structure.
1126 * @buf: pointer to char array to hold the output.
1127 */
1128static ssize_t
1129ds1685_rtc_sysfs_auxbatt_show(struct device *dev,
1130 struct device_attribute *attr, char *buf)
1131{
1132 struct platform_device *pdev = to_platform_device(dev);
1133 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1134 u8 ctrl4a;
1135
1136 ds1685_rtc_switch_to_bank1(rtc);
1137 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
1138 ds1685_rtc_switch_to_bank0(rtc);
1139
1140 return sprintf(buf, "%s\n",
1141 (ctrl4a & RTC_CTRL_4A_VRT2) ? "ok" : "not ok or N/A");
1142}
1143static DEVICE_ATTR(auxbatt, S_IRUGO, ds1685_rtc_sysfs_auxbatt_show, NULL);
1144
1145/**
1146 * ds1685_rtc_sysfs_serial_show - sysfs file for silicon serial number.
1147 * @dev: pointer to device structure.
1148 * @attr: pointer to device_attribute structure.
1149 * @buf: pointer to char array to hold the output.
1150 */
1151static ssize_t
1152ds1685_rtc_sysfs_serial_show(struct device *dev,
1153 struct device_attribute *attr, char *buf)
1154{
1155 struct platform_device *pdev = to_platform_device(dev);
1156 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
1157 u8 ssn[8];
1158
1159 ds1685_rtc_switch_to_bank1(rtc);
1160 ds1685_rtc_get_ssn(rtc, ssn);
1161 ds1685_rtc_switch_to_bank0(rtc);
1162
1163 return sprintf(buf, "%8phC\n", ssn);
1164}
1165static DEVICE_ATTR(serial, S_IRUGO, ds1685_rtc_sysfs_serial_show, NULL);
1166
1167/**
1168 * struct ds1685_rtc_sysfs_misc_attrs - list for misc RTC features.
1169 */
1170static struct attribute*
1171ds1685_rtc_sysfs_misc_attrs[] = {
1172 &dev_attr_battery.attr,
1173 &dev_attr_auxbatt.attr,
1174 &dev_attr_serial.attr,
1175 NULL,
1176};
1177
1178/**
1179 * struct ds1685_rtc_sysfs_misc_grp - attr group for misc RTC features.
1180 */
1181static const struct attribute_group
1182ds1685_rtc_sysfs_misc_grp = {
1183 .name = "misc",
1184 .attrs = ds1685_rtc_sysfs_misc_attrs,
1185};
1186
1187#ifdef CONFIG_RTC_DS1685_SYSFS_REGS
1188/**
1189 * struct ds1685_rtc_ctrl_regs.
1190 * @name: char pointer for the bit name.
1191 * @reg: control register the bit is in.
1192 * @bit: the bit's offset in the register.
1193 */
1194struct ds1685_rtc_ctrl_regs {
1195 const char *name;
1196 const u8 reg;
1197 const u8 bit;
1198};
1199
1200/*
1201 * Ctrl register bit lookup table.
1202 */
1203static const struct ds1685_rtc_ctrl_regs
1204ds1685_ctrl_regs_table[] = {
1205 { "uip", RTC_CTRL_A, RTC_CTRL_A_UIP },
1206 { "dv2", RTC_CTRL_A, RTC_CTRL_A_DV2 },
1207 { "dv1", RTC_CTRL_A, RTC_CTRL_A_DV1 },
1208 { "dv0", RTC_CTRL_A, RTC_CTRL_A_DV0 },
1209 { "rs3", RTC_CTRL_A, RTC_CTRL_A_RS3 },
1210 { "rs2", RTC_CTRL_A, RTC_CTRL_A_RS2 },
1211 { "rs1", RTC_CTRL_A, RTC_CTRL_A_RS1 },
1212 { "rs0", RTC_CTRL_A, RTC_CTRL_A_RS0 },
1213 { "set", RTC_CTRL_B, RTC_CTRL_B_SET },
1214 { "pie", RTC_CTRL_B, RTC_CTRL_B_PIE },
1215 { "aie", RTC_CTRL_B, RTC_CTRL_B_AIE },
1216 { "uie", RTC_CTRL_B, RTC_CTRL_B_UIE },
1217 { "sqwe", RTC_CTRL_B, RTC_CTRL_B_SQWE },
1218 { "dm", RTC_CTRL_B, RTC_CTRL_B_DM },
1219 { "2412", RTC_CTRL_B, RTC_CTRL_B_2412 },
1220 { "dse", RTC_CTRL_B, RTC_CTRL_B_DSE },
1221 { "irqf", RTC_CTRL_C, RTC_CTRL_C_IRQF },
1222 { "pf", RTC_CTRL_C, RTC_CTRL_C_PF },
1223 { "af", RTC_CTRL_C, RTC_CTRL_C_AF },
1224 { "uf", RTC_CTRL_C, RTC_CTRL_C_UF },
1225 { "vrt", RTC_CTRL_D, RTC_CTRL_D_VRT },
1226 { "vrt2", RTC_EXT_CTRL_4A, RTC_CTRL_4A_VRT2 },
1227 { "incr", RTC_EXT_CTRL_4A, RTC_CTRL_4A_INCR },
1228 { "pab", RTC_EXT_CTRL_4A, RTC_CTRL_4A_PAB },
1229 { "rf", RTC_EXT_CTRL_4A, RTC_CTRL_4A_RF },
1230 { "wf", RTC_EXT_CTRL_4A, RTC_CTRL_4A_WF },
1231 { "kf", RTC_EXT_CTRL_4A, RTC_CTRL_4A_KF },
1232#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
1233 { "bme", RTC_EXT_CTRL_4A, RTC_CTRL_4A_BME },
1234#endif
1235 { "abe", RTC_EXT_CTRL_4B, RTC_CTRL_4B_ABE },
1236 { "e32k", RTC_EXT_CTRL_4B, RTC_CTRL_4B_E32K },
1237 { "cs", RTC_EXT_CTRL_4B, RTC_CTRL_4B_CS },
1238 { "rce", RTC_EXT_CTRL_4B, RTC_CTRL_4B_RCE },
1239 { "prs", RTC_EXT_CTRL_4B, RTC_CTRL_4B_PRS },
1240 { "rie", RTC_EXT_CTRL_4B, RTC_CTRL_4B_RIE },
1241 { "wie", RTC_EXT_CTRL_4B, RTC_CTRL_4B_WIE },
1242 { "kse", RTC_EXT_CTRL_4B, RTC_CTRL_4B_KSE },
1243 { NULL, 0, 0 },
1244};
1245
1246/**
1247 * ds1685_rtc_sysfs_ctrl_regs_lookup - ctrl register bit lookup function.
1248 * @name: ctrl register bit to look up in ds1685_ctrl_regs_table.
1249 */
1250static const struct ds1685_rtc_ctrl_regs*
1251ds1685_rtc_sysfs_ctrl_regs_lookup(const char *name)
1252{
1253 const struct ds1685_rtc_ctrl_regs *p = ds1685_ctrl_regs_table;
1254
1255 for (; p->name != NULL; ++p)
1256 if (strcmp(p->name, name) == 0)
1257 return p;
1258
1259 return NULL;
1260}
1261
1262/**
1263 * ds1685_rtc_sysfs_ctrl_regs_show - reads a ctrl register bit via sysfs.
1264 * @dev: pointer to device structure.
1265 * @attr: pointer to device_attribute structure.
1266 * @buf: pointer to char array to hold the output.
1267 */
1268static ssize_t
1269ds1685_rtc_sysfs_ctrl_regs_show(struct device *dev,
1270 struct device_attribute *attr, char *buf)
1271{
1272 u8 tmp;
1273 struct ds1685_priv *rtc = dev_get_drvdata(dev);
1274 const struct ds1685_rtc_ctrl_regs *reg_info =
1275 ds1685_rtc_sysfs_ctrl_regs_lookup(attr->attr.name);
1276
1277 /* Make sure we actually matched something. */
1278 if (!reg_info)
1279 return -EINVAL;
1280
1281 /* No spinlock during a read -- mutex is already held. */
1282 ds1685_rtc_switch_to_bank1(rtc);
1283 tmp = rtc->read(rtc, reg_info->reg) & reg_info->bit;
1284 ds1685_rtc_switch_to_bank0(rtc);
1285
1286 return sprintf(buf, "%d\n", (tmp ? 1 : 0));
1287}
1288
1289/**
1290 * ds1685_rtc_sysfs_ctrl_regs_store - writes a ctrl register bit via sysfs.
1291 * @dev: pointer to device structure.
1292 * @attr: pointer to device_attribute structure.
1293 * @buf: pointer to char array to hold the output.
1294 * @count: number of bytes written.
1295 */
1296static ssize_t
1297ds1685_rtc_sysfs_ctrl_regs_store(struct device *dev,
1298 struct device_attribute *attr,
1299 const char *buf, size_t count)
1300{
1301 struct ds1685_priv *rtc = dev_get_drvdata(dev);
1302 u8 reg = 0, bit = 0, tmp;
1303 unsigned long flags;
1304 long int val = 0;
1305 const struct ds1685_rtc_ctrl_regs *reg_info =
1306 ds1685_rtc_sysfs_ctrl_regs_lookup(attr->attr.name);
1307
1308 /* We only accept numbers. */
1309 if (kstrtol(buf, 10, &val) < 0)
1310 return -EINVAL;
1311
1312 /* bits are binary, 0 or 1 only. */
1313 if ((val != 0) && (val != 1))
1314 return -ERANGE;
1315
1316 /* Make sure we actually matched something. */
1317 if (!reg_info)
1318 return -EINVAL;
1319
1320 reg = reg_info->reg;
1321 bit = reg_info->bit;
1322
1323 /* Safe to spinlock during a write. */
1324 ds1685_rtc_begin_ctrl_access(rtc, &flags);
1325 tmp = rtc->read(rtc, reg);
1326 rtc->write(rtc, reg, (val ? (tmp | bit) : (tmp & ~(bit))));
1327 ds1685_rtc_end_ctrl_access(rtc, flags);
1328
1329 return count;
1330}
1331
1332/**
1333 * DS1685_RTC_SYSFS_CTRL_REG_RO - device_attribute for read-only register bit.
1334 * @bit: bit to read.
1335 */
1336#define DS1685_RTC_SYSFS_CTRL_REG_RO(bit) \
1337 static DEVICE_ATTR(bit, S_IRUGO, \
1338 ds1685_rtc_sysfs_ctrl_regs_show, NULL)
1339
1340/**
1341 * DS1685_RTC_SYSFS_CTRL_REG_RW - device_attribute for read-write register bit.
1342 * @bit: bit to read or write.
1343 */
1344#define DS1685_RTC_SYSFS_CTRL_REG_RW(bit) \
1345 static DEVICE_ATTR(bit, S_IRUGO | S_IWUSR, \
1346 ds1685_rtc_sysfs_ctrl_regs_show, \
1347 ds1685_rtc_sysfs_ctrl_regs_store)
1348
1349/*
1350 * Control Register A bits.
1351 */
1352DS1685_RTC_SYSFS_CTRL_REG_RO(uip);
1353DS1685_RTC_SYSFS_CTRL_REG_RW(dv2);
1354DS1685_RTC_SYSFS_CTRL_REG_RW(dv1);
1355DS1685_RTC_SYSFS_CTRL_REG_RO(dv0);
1356DS1685_RTC_SYSFS_CTRL_REG_RW(rs3);
1357DS1685_RTC_SYSFS_CTRL_REG_RW(rs2);
1358DS1685_RTC_SYSFS_CTRL_REG_RW(rs1);
1359DS1685_RTC_SYSFS_CTRL_REG_RW(rs0);
1360
1361static struct attribute*
1362ds1685_rtc_sysfs_ctrla_attrs[] = {
1363 &dev_attr_uip.attr,
1364 &dev_attr_dv2.attr,
1365 &dev_attr_dv1.attr,
1366 &dev_attr_dv0.attr,
1367 &dev_attr_rs3.attr,
1368 &dev_attr_rs2.attr,
1369 &dev_attr_rs1.attr,
1370 &dev_attr_rs0.attr,
1371 NULL,
1372};
1373
1374static const struct attribute_group
1375ds1685_rtc_sysfs_ctrla_grp = {
1376 .name = "ctrla",
1377 .attrs = ds1685_rtc_sysfs_ctrla_attrs,
1378};
1379
1380
1381/*
1382 * Control Register B bits.
1383 */
1384DS1685_RTC_SYSFS_CTRL_REG_RO(set);
1385DS1685_RTC_SYSFS_CTRL_REG_RW(pie);
1386DS1685_RTC_SYSFS_CTRL_REG_RW(aie);
1387DS1685_RTC_SYSFS_CTRL_REG_RW(uie);
1388DS1685_RTC_SYSFS_CTRL_REG_RW(sqwe);
1389DS1685_RTC_SYSFS_CTRL_REG_RO(dm);
1390DS1685_RTC_SYSFS_CTRL_REG_RO(2412);
1391DS1685_RTC_SYSFS_CTRL_REG_RO(dse);
1392
1393static struct attribute*
1394ds1685_rtc_sysfs_ctrlb_attrs[] = {
1395 &dev_attr_set.attr,
1396 &dev_attr_pie.attr,
1397 &dev_attr_aie.attr,
1398 &dev_attr_uie.attr,
1399 &dev_attr_sqwe.attr,
1400 &dev_attr_dm.attr,
1401 &dev_attr_2412.attr,
1402 &dev_attr_dse.attr,
1403 NULL,
1404};
1405
1406static const struct attribute_group
1407ds1685_rtc_sysfs_ctrlb_grp = {
1408 .name = "ctrlb",
1409 .attrs = ds1685_rtc_sysfs_ctrlb_attrs,
1410};
1411
1412/*
1413 * Control Register C bits.
1414 *
1415 * Reading Control C clears these bits! Reading them individually can
1416 * possibly cause an interrupt to be missed. Use the /proc interface
1417 * to see all the bits in this register simultaneously.
1418 */
1419DS1685_RTC_SYSFS_CTRL_REG_RO(irqf);
1420DS1685_RTC_SYSFS_CTRL_REG_RO(pf);
1421DS1685_RTC_SYSFS_CTRL_REG_RO(af);
1422DS1685_RTC_SYSFS_CTRL_REG_RO(uf);
1423
1424static struct attribute*
1425ds1685_rtc_sysfs_ctrlc_attrs[] = {
1426 &dev_attr_irqf.attr,
1427 &dev_attr_pf.attr,
1428 &dev_attr_af.attr,
1429 &dev_attr_uf.attr,
1430 NULL,
1431};
1432
1433static const struct attribute_group
1434ds1685_rtc_sysfs_ctrlc_grp = {
1435 .name = "ctrlc",
1436 .attrs = ds1685_rtc_sysfs_ctrlc_attrs,
1437};
1438
1439/*
1440 * Control Register D bits.
1441 */
1442DS1685_RTC_SYSFS_CTRL_REG_RO(vrt);
1443
1444static struct attribute*
1445ds1685_rtc_sysfs_ctrld_attrs[] = {
1446 &dev_attr_vrt.attr,
1447 NULL,
1448};
1449
1450static const struct attribute_group
1451ds1685_rtc_sysfs_ctrld_grp = {
1452 .name = "ctrld",
1453 .attrs = ds1685_rtc_sysfs_ctrld_attrs,
1454};
1455
1456/*
1457 * Control Register 4A bits.
1458 */
1459DS1685_RTC_SYSFS_CTRL_REG_RO(vrt2);
1460DS1685_RTC_SYSFS_CTRL_REG_RO(incr);
1461DS1685_RTC_SYSFS_CTRL_REG_RW(pab);
1462DS1685_RTC_SYSFS_CTRL_REG_RW(rf);
1463DS1685_RTC_SYSFS_CTRL_REG_RW(wf);
1464DS1685_RTC_SYSFS_CTRL_REG_RW(kf);
1465#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
1466DS1685_RTC_SYSFS_CTRL_REG_RO(bme);
1467#endif
1468
1469static struct attribute*
1470ds1685_rtc_sysfs_ctrl4a_attrs[] = {
1471 &dev_attr_vrt2.attr,
1472 &dev_attr_incr.attr,
1473 &dev_attr_pab.attr,
1474 &dev_attr_rf.attr,
1475 &dev_attr_wf.attr,
1476 &dev_attr_kf.attr,
1477#if !defined(CONFIG_RTC_DRV_DS1685) && !defined(CONFIG_RTC_DRV_DS1689)
1478 &dev_attr_bme.attr,
1479#endif
1480 NULL,
1481};
1482
1483static const struct attribute_group
1484ds1685_rtc_sysfs_ctrl4a_grp = {
1485 .name = "ctrl4a",
1486 .attrs = ds1685_rtc_sysfs_ctrl4a_attrs,
1487};
1488
1489/*
1490 * Control Register 4B bits.
1491 */
1492DS1685_RTC_SYSFS_CTRL_REG_RW(abe);
1493DS1685_RTC_SYSFS_CTRL_REG_RW(e32k);
1494DS1685_RTC_SYSFS_CTRL_REG_RO(cs);
1495DS1685_RTC_SYSFS_CTRL_REG_RW(rce);
1496DS1685_RTC_SYSFS_CTRL_REG_RW(prs);
1497DS1685_RTC_SYSFS_CTRL_REG_RW(rie);
1498DS1685_RTC_SYSFS_CTRL_REG_RW(wie);
1499DS1685_RTC_SYSFS_CTRL_REG_RW(kse);
1500
1501static struct attribute*
1502ds1685_rtc_sysfs_ctrl4b_attrs[] = {
1503 &dev_attr_abe.attr,
1504 &dev_attr_e32k.attr,
1505 &dev_attr_cs.attr,
1506 &dev_attr_rce.attr,
1507 &dev_attr_prs.attr,
1508 &dev_attr_rie.attr,
1509 &dev_attr_wie.attr,
1510 &dev_attr_kse.attr,
1511 NULL,
1512};
1513
1514static const struct attribute_group
1515ds1685_rtc_sysfs_ctrl4b_grp = {
1516 .name = "ctrl4b",
1517 .attrs = ds1685_rtc_sysfs_ctrl4b_attrs,
1518};
1519
1520
1521/**
1522 * struct ds1685_rtc_ctrl_regs.
1523 * @name: char pointer for the bit name.
1524 * @reg: control register the bit is in.
1525 * @bit: the bit's offset in the register.
1526 */
1527struct ds1685_rtc_time_regs {
1528 const char *name;
1529 const u8 reg;
1530 const u8 mask;
1531 const u8 min;
1532 const u8 max;
1533};
1534
1535/*
1536 * Time/Date register lookup tables.
1537 */
1538static const struct ds1685_rtc_time_regs
1539ds1685_time_regs_bcd_table[] = {
1540 { "seconds", RTC_SECS, RTC_SECS_BCD_MASK, 0, 59 },
1541 { "minutes", RTC_MINS, RTC_MINS_BCD_MASK, 0, 59 },
1542 { "hours", RTC_HRS, RTC_HRS_24_BCD_MASK, 0, 23 },
1543 { "wday", RTC_WDAY, RTC_WDAY_MASK, 1, 7 },
1544 { "mday", RTC_MDAY, RTC_MDAY_BCD_MASK, 1, 31 },
1545 { "month", RTC_MONTH, RTC_MONTH_BCD_MASK, 1, 12 },
1546 { "year", RTC_YEAR, RTC_YEAR_BCD_MASK, 0, 99 },
1547 { "century", RTC_CENTURY, RTC_CENTURY_MASK, 0, 99 },
1548 { "alarm_seconds", RTC_SECS_ALARM, RTC_SECS_BCD_MASK, 0, 59 },
1549 { "alarm_minutes", RTC_MINS_ALARM, RTC_MINS_BCD_MASK, 0, 59 },
1550 { "alarm_hours", RTC_HRS_ALARM, RTC_HRS_24_BCD_MASK, 0, 23 },
1551 { "alarm_mday", RTC_MDAY_ALARM, RTC_MDAY_ALARM_MASK, 1, 31 },
1552 { NULL, 0, 0, 0, 0 },
1553};
1554
1555static const struct ds1685_rtc_time_regs
1556ds1685_time_regs_bin_table[] = {
1557 { "seconds", RTC_SECS, RTC_SECS_BIN_MASK, 0x00, 0x3b },
1558 { "minutes", RTC_MINS, RTC_MINS_BIN_MASK, 0x00, 0x3b },
1559 { "hours", RTC_HRS, RTC_HRS_24_BIN_MASK, 0x00, 0x17 },
1560 { "wday", RTC_WDAY, RTC_WDAY_MASK, 0x01, 0x07 },
1561 { "mday", RTC_MDAY, RTC_MDAY_BIN_MASK, 0x01, 0x1f },
1562 { "month", RTC_MONTH, RTC_MONTH_BIN_MASK, 0x01, 0x0c },
1563 { "year", RTC_YEAR, RTC_YEAR_BIN_MASK, 0x00, 0x63 },
1564 { "century", RTC_CENTURY, RTC_CENTURY_MASK, 0x00, 0x63 },
1565 { "alarm_seconds", RTC_SECS_ALARM, RTC_SECS_BIN_MASK, 0x00, 0x3b },
1566 { "alarm_minutes", RTC_MINS_ALARM, RTC_MINS_BIN_MASK, 0x00, 0x3b },
1567 { "alarm_hours", RTC_HRS_ALARM, RTC_HRS_24_BIN_MASK, 0x00, 0x17 },
1568 { "alarm_mday", RTC_MDAY_ALARM, RTC_MDAY_ALARM_MASK, 0x01, 0x1f },
1569 { NULL, 0, 0, 0x00, 0x00 },
1570};
1571
1572/**
1573 * ds1685_rtc_sysfs_time_regs_bcd_lookup - time/date reg bit lookup function.
1574 * @name: register bit to look up in ds1685_time_regs_bcd_table.
1575 */
1576static const struct ds1685_rtc_time_regs*
1577ds1685_rtc_sysfs_time_regs_lookup(const char *name, bool bcd_mode)
1578{
1579 const struct ds1685_rtc_time_regs *p;
1580
1581 if (bcd_mode)
1582 p = ds1685_time_regs_bcd_table;
1583 else
1584 p = ds1685_time_regs_bin_table;
1585
1586 for (; p->name != NULL; ++p)
1587 if (strcmp(p->name, name) == 0)
1588 return p;
1589
1590 return NULL;
1591}
1592
1593/**
1594 * ds1685_rtc_sysfs_time_regs_show - reads a time/date register via sysfs.
1595 * @dev: pointer to device structure.
1596 * @attr: pointer to device_attribute structure.
1597 * @buf: pointer to char array to hold the output.
1598 */
1599static ssize_t
1600ds1685_rtc_sysfs_time_regs_show(struct device *dev,
1601 struct device_attribute *attr, char *buf)
1602{
1603 u8 tmp;
1604 struct ds1685_priv *rtc = dev_get_drvdata(dev);
1605 const struct ds1685_rtc_time_regs *bcd_reg_info =
1606 ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, true);
1607 const struct ds1685_rtc_time_regs *bin_reg_info =
1608 ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
1609
1610 /* Make sure we actually matched something. */
1611 if (!bcd_reg_info || !bin_reg_info)
1612 return -EINVAL;
1613
1614 /* bcd_reg_info->reg == bin_reg_info->reg. */
1615 ds1685_rtc_begin_data_access(rtc);
1616 tmp = rtc->read(rtc, bcd_reg_info->reg);
1617 ds1685_rtc_end_data_access(rtc);
1618
1619 tmp = ds1685_rtc_bcd2bin(rtc, tmp, bcd_reg_info->mask,
1620 bin_reg_info->mask);
1621
1622 return sprintf(buf, "%d\n", tmp);
1623}
1624
1625/**
1626 * ds1685_rtc_sysfs_time_regs_store - writes a time/date register via sysfs.
1627 * @dev: pointer to device structure.
1628 * @attr: pointer to device_attribute structure.
1629 * @buf: pointer to char array to hold the output.
1630 * @count: number of bytes written.
1631 */
1632static ssize_t
1633ds1685_rtc_sysfs_time_regs_store(struct device *dev,
1634 struct device_attribute *attr,
1635 const char *buf, size_t count)
1636{
1637 long int val = 0;
1638 struct ds1685_priv *rtc = dev_get_drvdata(dev);
1639 const struct ds1685_rtc_time_regs *bcd_reg_info =
1640 ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, true);
1641 const struct ds1685_rtc_time_regs *bin_reg_info =
1642 ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false);
1643
1644 /* We only accept numbers. */
1645 if (kstrtol(buf, 10, &val) < 0)
1646 return -EINVAL;
1647
1648 /* Make sure we actually matched something. */
1649 if (!bcd_reg_info || !bin_reg_info)
1650 return -EINVAL;
1651
1652 /* Check for a valid range. */
1653 if (rtc->bcd_mode) {
1654 if ((val < bcd_reg_info->min) || (val > bcd_reg_info->max))
1655 return -ERANGE;
1656 } else {
1657 if ((val < bin_reg_info->min) || (val > bin_reg_info->max))
1658 return -ERANGE;
1659 }
1660
1661 val = ds1685_rtc_bin2bcd(rtc, val, bin_reg_info->mask,
1662 bcd_reg_info->mask);
1663
1664 /* bcd_reg_info->reg == bin_reg_info->reg. */
1665 ds1685_rtc_begin_data_access(rtc);
1666 rtc->write(rtc, bcd_reg_info->reg, val);
1667 ds1685_rtc_end_data_access(rtc);
1668
1669 return count;
1670}
1671
1672/**
1673 * DS1685_RTC_SYSFS_REG_RW - device_attribute for a read-write time register.
1674 * @reg: time/date register to read or write.
1675 */
1676#define DS1685_RTC_SYSFS_TIME_REG_RW(reg) \
1677 static DEVICE_ATTR(reg, S_IRUGO | S_IWUSR, \
1678 ds1685_rtc_sysfs_time_regs_show, \
1679 ds1685_rtc_sysfs_time_regs_store)
1680
1681/*
1682 * Time/Date Register bits.
1683 */
1684DS1685_RTC_SYSFS_TIME_REG_RW(seconds);
1685DS1685_RTC_SYSFS_TIME_REG_RW(minutes);
1686DS1685_RTC_SYSFS_TIME_REG_RW(hours);
1687DS1685_RTC_SYSFS_TIME_REG_RW(wday);
1688DS1685_RTC_SYSFS_TIME_REG_RW(mday);
1689DS1685_RTC_SYSFS_TIME_REG_RW(month);
1690DS1685_RTC_SYSFS_TIME_REG_RW(year);
1691DS1685_RTC_SYSFS_TIME_REG_RW(century);
1692DS1685_RTC_SYSFS_TIME_REG_RW(alarm_seconds);
1693DS1685_RTC_SYSFS_TIME_REG_RW(alarm_minutes);
1694DS1685_RTC_SYSFS_TIME_REG_RW(alarm_hours);
1695DS1685_RTC_SYSFS_TIME_REG_RW(alarm_mday);
1696
1697static struct attribute*
1698ds1685_rtc_sysfs_time_attrs[] = {
1699 &dev_attr_seconds.attr,
1700 &dev_attr_minutes.attr,
1701 &dev_attr_hours.attr,
1702 &dev_attr_wday.attr,
1703 &dev_attr_mday.attr,
1704 &dev_attr_month.attr,
1705 &dev_attr_year.attr,
1706 &dev_attr_century.attr,
1707 NULL,
1708};
1709
1710static const struct attribute_group
1711ds1685_rtc_sysfs_time_grp = {
1712 .name = "datetime",
1713 .attrs = ds1685_rtc_sysfs_time_attrs,
1714};
1715
1716static struct attribute*
1717ds1685_rtc_sysfs_alarm_attrs[] = {
1718 &dev_attr_alarm_seconds.attr,
1719 &dev_attr_alarm_minutes.attr,
1720 &dev_attr_alarm_hours.attr,
1721 &dev_attr_alarm_mday.attr,
1722 NULL,
1723};
1724
1725static const struct attribute_group
1726ds1685_rtc_sysfs_alarm_grp = {
1727 .name = "alarm",
1728 .attrs = ds1685_rtc_sysfs_alarm_attrs,
1729};
1730#endif /* CONFIG_RTC_DS1685_SYSFS_REGS */
1731
1732
1733/**
1734 * ds1685_rtc_sysfs_register - register sysfs files.
1735 * @dev: pointer to device structure.
1736 */
1737static int
1738ds1685_rtc_sysfs_register(struct device *dev)
1739{
1740 int ret = 0;
1741
1742 sysfs_bin_attr_init(&ds1685_rtc_sysfs_nvram_attr);
1743 ret = sysfs_create_bin_file(&dev->kobj, &ds1685_rtc_sysfs_nvram_attr);
1744 if (ret)
1745 return ret;
1746
1747 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_misc_grp);
1748 if (ret)
1749 return ret;
1750
1751#ifdef CONFIG_RTC_DS1685_SYSFS_REGS
1752 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrla_grp);
1753 if (ret)
1754 return ret;
1755
1756 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlb_grp);
1757 if (ret)
1758 return ret;
1759
1760 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlc_grp);
1761 if (ret)
1762 return ret;
1763
1764 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrld_grp);
1765 if (ret)
1766 return ret;
1767
1768 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4a_grp);
1769 if (ret)
1770 return ret;
1771
1772 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4b_grp);
1773 if (ret)
1774 return ret;
1775
1776 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_time_grp);
1777 if (ret)
1778 return ret;
1779
1780 ret = sysfs_create_group(&dev->kobj, &ds1685_rtc_sysfs_alarm_grp);
1781 if (ret)
1782 return ret;
1783#endif
1784 return 0;
1785}
1786
1787/**
1788 * ds1685_rtc_sysfs_unregister - unregister sysfs files.
1789 * @dev: pointer to device structure.
1790 */
1791static int
1792ds1685_rtc_sysfs_unregister(struct device *dev)
1793{
1794 sysfs_remove_bin_file(&dev->kobj, &ds1685_rtc_sysfs_nvram_attr);
1795 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_misc_grp);
1796
1797#ifdef CONFIG_RTC_DS1685_SYSFS_REGS
1798 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrla_grp);
1799 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlb_grp);
1800 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrlc_grp);
1801 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrld_grp);
1802 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4a_grp);
1803 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_ctrl4b_grp);
1804 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_time_grp);
1805 sysfs_remove_group(&dev->kobj, &ds1685_rtc_sysfs_alarm_grp);
1806#endif
1807
1808 return 0;
1809}
1810#endif /* CONFIG_SYSFS */
1811
1812
1813
1814/* ----------------------------------------------------------------------- */
1815/* Driver Probe/Removal */
1816
1817/**
1818 * ds1685_rtc_probe - initializes rtc driver.
1819 * @pdev: pointer to platform_device structure.
1820 */
1821static int
1822ds1685_rtc_probe(struct platform_device *pdev)
1823{
1824 struct rtc_device *rtc_dev;
1825 struct resource *res;
1826 struct ds1685_priv *rtc;
1827 struct ds1685_rtc_platform_data *pdata;
1828 u8 ctrla, ctrlb, hours;
1829 unsigned char am_pm;
1830 int ret = 0;
1831
1832 /* Get the platform data. */
1833 pdata = (struct ds1685_rtc_platform_data *) pdev->dev.platform_data;
1834 if (!pdata)
1835 return -ENODEV;
1836
1837 /* Allocate memory for the rtc device. */
1838 rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
1839 if (!rtc)
1840 return -ENOMEM;
1841
1842 /*
1843 * Allocate/setup any IORESOURCE_MEM resources, if required. Not all
1844 * platforms put the RTC in an easy-access place. Like the SGI Octane,
1845 * which attaches the RTC to a "ByteBus", hooked to a SuperIO chip
1846 * that sits behind the IOC3 PCI metadevice.
1847 */
1848 if (pdata->alloc_io_resources) {
1849 /* Get the platform resources. */
1850 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1851 if (!res)
1852 return -ENXIO;
1853 rtc->size = resource_size(res);
1854
1855 /* Request a memory region. */
1856 /* XXX: mmio-only for now. */
1857 if (!devm_request_mem_region(&pdev->dev, res->start, rtc->size,
1858 pdev->name))
1859 return -EBUSY;
1860
1861 /*
1862 * Set the base address for the rtc, and ioremap its
1863 * registers.
1864 */
1865 rtc->baseaddr = res->start;
1866 rtc->regs = devm_ioremap(&pdev->dev, res->start, rtc->size);
1867 if (!rtc->regs)
1868 return -ENOMEM;
1869 }
1870 rtc->alloc_io_resources = pdata->alloc_io_resources;
1871
1872 /* Get the register step size. */
1873 if (pdata->regstep > 0)
1874 rtc->regstep = pdata->regstep;
1875 else
1876 rtc->regstep = 1;
1877
1878 /* Platform read function, else default if mmio setup */
1879 if (pdata->plat_read)
1880 rtc->read = pdata->plat_read;
1881 else
1882 if (pdata->alloc_io_resources)
1883 rtc->read = ds1685_read;
1884 else
1885 return -ENXIO;
1886
1887 /* Platform write function, else default if mmio setup */
1888 if (pdata->plat_write)
1889 rtc->write = pdata->plat_write;
1890 else
1891 if (pdata->alloc_io_resources)
1892 rtc->write = ds1685_write;
1893 else
1894 return -ENXIO;
1895
1896 /* Platform pre-shutdown function, if defined. */
1897 if (pdata->plat_prepare_poweroff)
1898 rtc->prepare_poweroff = pdata->plat_prepare_poweroff;
1899
1900 /* Platform wake_alarm function, if defined. */
1901 if (pdata->plat_wake_alarm)
1902 rtc->wake_alarm = pdata->plat_wake_alarm;
1903
1904 /* Platform post_ram_clear function, if defined. */
1905 if (pdata->plat_post_ram_clear)
1906 rtc->post_ram_clear = pdata->plat_post_ram_clear;
1907
1908 /* Init the spinlock, workqueue, & set the driver data. */
1909 spin_lock_init(&rtc->lock);
1910 INIT_WORK(&rtc->work, ds1685_rtc_work_queue);
1911 platform_set_drvdata(pdev, rtc);
1912
1913 /* Turn the oscillator on if is not already on (DV1 = 1). */
1914 ctrla = rtc->read(rtc, RTC_CTRL_A);
1915 if (!(ctrla & RTC_CTRL_A_DV1))
1916 ctrla |= RTC_CTRL_A_DV1;
1917
1918 /* Enable the countdown chain (DV2 = 0) */
1919 ctrla &= ~(RTC_CTRL_A_DV2);
1920
1921 /* Clear RS3-RS0 in Control A. */
1922 ctrla &= ~(RTC_CTRL_A_RS_MASK);
1923
1924 /*
1925 * All done with Control A. Switch to Bank 1 for the remainder of
1926 * the RTC setup so we have access to the extended functions.
1927 */
1928 ctrla |= RTC_CTRL_A_DV0;
1929 rtc->write(rtc, RTC_CTRL_A, ctrla);
1930
1931 /* Default to 32768kHz output. */
1932 rtc->write(rtc, RTC_EXT_CTRL_4B,
1933 (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_E32K));
1934
1935 /* Set the SET bit in Control B so we can do some housekeeping. */
1936 rtc->write(rtc, RTC_CTRL_B,
1937 (rtc->read(rtc, RTC_CTRL_B) | RTC_CTRL_B_SET));
1938
1939 /* Read Ext Ctrl 4A and check the INCR bit to avoid a lockout. */
1940 while (rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_INCR)
1941 cpu_relax();
1942
1943 /*
1944 * If the platform supports BCD mode, then set DM=0 in Control B.
1945 * Otherwise, set DM=1 for BIN mode.
1946 */
1947 ctrlb = rtc->read(rtc, RTC_CTRL_B);
1948 if (pdata->bcd_mode)
1949 ctrlb &= ~(RTC_CTRL_B_DM);
1950 else
1951 ctrlb |= RTC_CTRL_B_DM;
1952 rtc->bcd_mode = pdata->bcd_mode;
1953
1954 /*
1955 * Disable Daylight Savings Time (DSE = 0).
1956 * The RTC has hardcoded timezone information that is rendered
1957 * obselete. We'll let the OS deal with DST settings instead.
1958 */
1959 if (ctrlb & RTC_CTRL_B_DSE)
1960 ctrlb &= ~(RTC_CTRL_B_DSE);
1961
1962 /* Force 24-hour mode (2412 = 1). */
1963 if (!(ctrlb & RTC_CTRL_B_2412)) {
1964 /* Reinitialize the time hours. */
1965 hours = rtc->read(rtc, RTC_HRS);
1966 am_pm = hours & RTC_HRS_AMPM_MASK;
1967 hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
1968 RTC_HRS_12_BIN_MASK);
1969 hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
1970
1971 /* Enable 24-hour mode. */
1972 ctrlb |= RTC_CTRL_B_2412;
1973
1974 /* Write back to Control B, including DM & DSE bits. */
1975 rtc->write(rtc, RTC_CTRL_B, ctrlb);
1976
1977 /* Write the time hours back. */
1978 rtc->write(rtc, RTC_HRS,
1979 ds1685_rtc_bin2bcd(rtc, hours,
1980 RTC_HRS_24_BIN_MASK,
1981 RTC_HRS_24_BCD_MASK));
1982
1983 /* Reinitialize the alarm hours. */
1984 hours = rtc->read(rtc, RTC_HRS_ALARM);
1985 am_pm = hours & RTC_HRS_AMPM_MASK;
1986 hours = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_12_BCD_MASK,
1987 RTC_HRS_12_BIN_MASK);
1988 hours = ((hours == 12) ? 0 : ((am_pm) ? hours + 12 : hours));
1989
1990 /* Write the alarm hours back. */
1991 rtc->write(rtc, RTC_HRS_ALARM,
1992 ds1685_rtc_bin2bcd(rtc, hours,
1993 RTC_HRS_24_BIN_MASK,
1994 RTC_HRS_24_BCD_MASK));
1995 } else {
1996 /* 24-hour mode is already set, so write Control B back. */
1997 rtc->write(rtc, RTC_CTRL_B, ctrlb);
1998 }
1999
2000 /* Unset the SET bit in Control B so the RTC can update. */
2001 rtc->write(rtc, RTC_CTRL_B,
2002 (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_SET)));
2003
2004 /* Check the main battery. */
2005 if (!(rtc->read(rtc, RTC_CTRL_D) & RTC_CTRL_D_VRT))
2006 dev_warn(&pdev->dev,
2007 "Main battery is exhausted! RTC may be invalid!\n");
2008
2009 /* Check the auxillary battery. It is optional. */
2010 if (!(rtc->read(rtc, RTC_EXT_CTRL_4A) & RTC_CTRL_4A_VRT2))
2011 dev_warn(&pdev->dev,
2012 "Aux battery is exhausted or not available.\n");
2013
2014 /* Read Ctrl B and clear PIE/AIE/UIE. */
2015 rtc->write(rtc, RTC_CTRL_B,
2016 (rtc->read(rtc, RTC_CTRL_B) & ~(RTC_CTRL_B_PAU_MASK)));
2017
2018 /* Reading Ctrl C auto-clears PF/AF/UF. */
2019 rtc->read(rtc, RTC_CTRL_C);
2020
2021 /* Read Ctrl 4B and clear RIE/WIE/KSE. */
2022 rtc->write(rtc, RTC_EXT_CTRL_4B,
2023 (rtc->read(rtc, RTC_EXT_CTRL_4B) & ~(RTC_CTRL_4B_RWK_MASK)));
2024
2025 /* Clear RF/WF/KF in Ctrl 4A. */
2026 rtc->write(rtc, RTC_EXT_CTRL_4A,
2027 (rtc->read(rtc, RTC_EXT_CTRL_4A) & ~(RTC_CTRL_4A_RWK_MASK)));
2028
2029 /*
2030 * Re-enable KSE to handle power button events. We do not enable
2031 * WIE or RIE by default.
2032 */
2033 rtc->write(rtc, RTC_EXT_CTRL_4B,
2034 (rtc->read(rtc, RTC_EXT_CTRL_4B) | RTC_CTRL_4B_KSE));
2035
2036 /*
2037 * Fetch the IRQ and setup the interrupt handler.
2038 *
2039 * Not all platforms have the IRQF pin tied to something. If not, the
2040 * RTC will still set the *IE / *F flags and raise IRQF in ctrlc, but
2041 * there won't be an automatic way of notifying the kernel about it,
2042 * unless ctrlc is explicitly polled.
2043 */
2044 if (!pdata->no_irq) {
2045 ret = platform_get_irq(pdev, 0);
2046 if (ret > 0) {
2047 rtc->irq_num = ret;
2048
2049 /* Request an IRQ. */
2050 ret = devm_request_irq(&pdev->dev, rtc->irq_num,
2051 ds1685_rtc_irq_handler,
2052 IRQF_SHARED, pdev->name, pdev);
2053
2054 /* Check to see if something came back. */
2055 if (unlikely(ret)) {
2056 dev_warn(&pdev->dev,
2057 "RTC interrupt not available\n");
2058 rtc->irq_num = 0;
2059 }
2060 } else
2061 return ret;
2062 }
2063 rtc->no_irq = pdata->no_irq;
2064
2065 /* Setup complete. */
2066 ds1685_rtc_switch_to_bank0(rtc);
2067
2068 /* Register the device as an RTC. */
2069 rtc_dev = rtc_device_register(pdev->name, &pdev->dev,
2070 &ds1685_rtc_ops, THIS_MODULE);
2071
2072 /* Success? */
2073 if (IS_ERR(rtc_dev))
2074 return PTR_ERR(rtc_dev);
2075
2076 /* Maximum periodic rate is 8192Hz (0.122070ms). */
2077 rtc_dev->max_user_freq = RTC_MAX_USER_FREQ;
2078
2079 /* See if the platform doesn't support UIE. */
2080 if (pdata->uie_unsupported)
2081 rtc_dev->uie_unsupported = 1;
2082 rtc->uie_unsupported = pdata->uie_unsupported;
2083
2084 rtc->dev = rtc_dev;
2085
2086#ifdef CONFIG_SYSFS
2087 ret = ds1685_rtc_sysfs_register(&pdev->dev);
2088 if (ret)
2089 rtc_device_unregister(rtc->dev);
2090#endif
2091
2092 /* Done! */
2093 return ret;
2094}
2095
2096/**
2097 * ds1685_rtc_remove - removes rtc driver.
2098 * @pdev: pointer to platform_device structure.
2099 */
2100static int
2101ds1685_rtc_remove(struct platform_device *pdev)
2102{
2103 struct ds1685_priv *rtc = platform_get_drvdata(pdev);
2104
2105#ifdef CONFIG_SYSFS
2106 ds1685_rtc_sysfs_unregister(&pdev->dev);
2107#endif
2108
2109 rtc_device_unregister(rtc->dev);
2110
2111 /* Read Ctrl B and clear PIE/AIE/UIE. */
2112 rtc->write(rtc, RTC_CTRL_B,
2113 (rtc->read(rtc, RTC_CTRL_B) &
2114 ~(RTC_CTRL_B_PAU_MASK)));
2115
2116 /* Reading Ctrl C auto-clears PF/AF/UF. */
2117 rtc->read(rtc, RTC_CTRL_C);
2118
2119 /* Read Ctrl 4B and clear RIE/WIE/KSE. */
2120 rtc->write(rtc, RTC_EXT_CTRL_4B,
2121 (rtc->read(rtc, RTC_EXT_CTRL_4B) &
2122 ~(RTC_CTRL_4B_RWK_MASK)));
2123
2124 /* Manually clear RF/WF/KF in Ctrl 4A. */
2125 rtc->write(rtc, RTC_EXT_CTRL_4A,
2126 (rtc->read(rtc, RTC_EXT_CTRL_4A) &
2127 ~(RTC_CTRL_4A_RWK_MASK)));
2128
2129 cancel_work_sync(&rtc->work);
2130
2131 return 0;
2132}
2133
2134/**
2135 * ds1685_rtc_driver - rtc driver properties.
2136 */
2137static struct platform_driver ds1685_rtc_driver = {
2138 .driver = {
2139 .name = "rtc-ds1685",
2140 },
2141 .probe = ds1685_rtc_probe,
2142 .remove = ds1685_rtc_remove,
2143};
2144module_platform_driver(ds1685_rtc_driver);
2145/* ----------------------------------------------------------------------- */
2146
2147
2148/* ----------------------------------------------------------------------- */
2149/* Poweroff function */
2150
2151/**
2152 * ds1685_rtc_poweroff - uses the RTC chip to power the system off.
2153 * @pdev: pointer to platform_device structure.
2154 */
2155void __noreturn
2156ds1685_rtc_poweroff(struct platform_device *pdev)
2157{
2158 u8 ctrla, ctrl4a, ctrl4b;
2159 struct ds1685_priv *rtc;
2160
2161 /* Check for valid RTC data, else, spin forever. */
2162 if (unlikely(!pdev)) {
2163 pr_emerg("platform device data not available, spinning forever ...\n");
2164 while(1);
2165 unreachable();
2166 } else {
2167 /* Get the rtc data. */
2168 rtc = platform_get_drvdata(pdev);
2169
2170 /*
2171 * Disable our IRQ. We're powering down, so we're not
2172 * going to worry about cleaning up. Most of that should
2173 * have been taken care of by the shutdown scripts and this
2174 * is the final function call.
2175 */
2176 if (!rtc->no_irq)
2177 disable_irq_nosync(rtc->irq_num);
2178
2179 /* Oscillator must be on and the countdown chain enabled. */
2180 ctrla = rtc->read(rtc, RTC_CTRL_A);
2181 ctrla |= RTC_CTRL_A_DV1;
2182 ctrla &= ~(RTC_CTRL_A_DV2);
2183 rtc->write(rtc, RTC_CTRL_A, ctrla);
2184
2185 /*
2186 * Read Control 4A and check the status of the auxillary
2187 * battery. This must be present and working (VRT2 = 1)
2188 * for wakeup and kickstart functionality to be useful.
2189 */
2190 ds1685_rtc_switch_to_bank1(rtc);
2191 ctrl4a = rtc->read(rtc, RTC_EXT_CTRL_4A);
2192 if (ctrl4a & RTC_CTRL_4A_VRT2) {
2193 /* Clear all of the interrupt flags on Control 4A. */
2194 ctrl4a &= ~(RTC_CTRL_4A_RWK_MASK);
2195 rtc->write(rtc, RTC_EXT_CTRL_4A, ctrl4a);
2196
2197 /*
2198 * The auxillary battery is present and working.
2199 * Enable extended functions (ABE=1), enable
2200 * wake-up (WIE=1), and enable kickstart (KSE=1)
2201 * in Control 4B.
2202 */
2203 ctrl4b = rtc->read(rtc, RTC_EXT_CTRL_4B);
2204 ctrl4b |= (RTC_CTRL_4B_ABE | RTC_CTRL_4B_WIE |
2205 RTC_CTRL_4B_KSE);
2206 rtc->write(rtc, RTC_EXT_CTRL_4B, ctrl4b);
2207 }
2208
2209 /* Set PAB to 1 in Control 4A to power the system down. */
2210 dev_warn(&pdev->dev, "Powerdown.\n");
2211 msleep(20);
2212 rtc->write(rtc, RTC_EXT_CTRL_4A,
2213 (ctrl4a | RTC_CTRL_4A_PAB));
2214
2215 /* Spin ... we do not switch back to bank0. */
2216 unreachable();
2217 }
2218}
2219EXPORT_SYMBOL(ds1685_rtc_poweroff);
2220/* ----------------------------------------------------------------------- */
2221
2222
2223MODULE_AUTHOR("Joshua Kinard <kumba@gentoo.org>");
2224MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd-electronics.com>");
2225MODULE_DESCRIPTION("Dallas/Maxim DS1685/DS1687-series RTC driver");
2226MODULE_LICENSE("GPL");
2227MODULE_VERSION(DRV_VERSION);
2228MODULE_ALIAS("platform:rtc-ds1685");