Loading...
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_MTK
23 tristate
24 select FW_LOADER
25
26config BT_HCIBTUSB
27 tristate "HCI USB driver"
28 depends on USB
29 select BT_INTEL
30 help
31 Bluetooth HCI USB driver.
32 This driver is required if you want to use Bluetooth devices with
33 USB interface.
34
35 Say Y here to compile support for Bluetooth USB devices into the
36 kernel or say M to compile it as module (btusb).
37
38config BT_HCIBTUSB_AUTOSUSPEND
39 bool "Enable USB autosuspend for Bluetooth USB devices by default"
40 depends on BT_HCIBTUSB
41 help
42 Say Y here to enable USB autosuspend for Bluetooth USB devices by
43 default.
44
45 This can be overridden by passing btusb.enable_autosuspend=[y|n]
46 on the kernel commandline.
47
48config BT_HCIBTUSB_POLL_SYNC
49 bool "Enable USB poll_sync for Bluetooth USB devices by default"
50 depends on BT_HCIBTUSB
51 default y
52 help
53 poll_sync synchronizes the USB data and event endpoints by
54 prioritizing the later.
55
56 Say Y here to enable USB poll_sync for Bluetooth USB devices by
57 default.
58
59config BT_HCIBTUSB_BCM
60 bool "Broadcom protocol support"
61 depends on BT_HCIBTUSB
62 select BT_BCM
63 default y
64 help
65 The Broadcom protocol support enables firmware and patchram
66 download support for Broadcom Bluetooth controllers.
67
68 Say Y here to compile support for Broadcom protocol.
69
70config BT_HCIBTUSB_MTK
71 bool "MediaTek protocol support"
72 depends on BT_HCIBTUSB
73 select BT_MTK
74 default n
75 help
76 The MediaTek protocol support enables firmware download
77 support and chip initialization for MediaTek Bluetooth
78 USB controllers.
79
80 Say Y here to compile support for MediaTek protocol.
81
82config BT_HCIBTUSB_RTL
83 bool "Realtek protocol support"
84 depends on BT_HCIBTUSB
85 select BT_RTL
86 default y
87 help
88 The Realtek protocol support enables firmware and configuration
89 download support for Realtek Bluetooth controllers.
90
91 Say Y here to compile support for Realtek protocol.
92
93config BT_HCIBTSDIO
94 tristate "HCI SDIO driver"
95 depends on MMC
96 help
97 Bluetooth HCI SDIO driver.
98 This driver is required if you want to use Bluetooth device with
99 SDIO interface.
100
101 Say Y here to compile support for Bluetooth SDIO devices into the
102 kernel or say M to compile it as module (btsdio).
103
104config BT_HCIUART
105 tristate "HCI UART driver"
106 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
107 depends on NVMEM || !NVMEM
108 depends on TTY
109 help
110 Bluetooth HCI UART driver.
111 This driver is required if you want to use Bluetooth devices with
112 serial port interface. You will also need this driver if you have
113 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
114 adapter and BrainBoxes Bluetooth PC Card.
115
116 Say Y here to compile support for Bluetooth UART devices into the
117 kernel or say M to compile it as module (hci_uart).
118
119config BT_HCIUART_SERDEV
120 bool
121 depends on SERIAL_DEV_BUS && BT_HCIUART
122 default y
123
124config BT_HCIUART_H4
125 bool "UART (H4) protocol support"
126 depends on BT_HCIUART
127 help
128 UART (H4) is serial protocol for communication between Bluetooth
129 device and host. This protocol is required for most Bluetooth devices
130 with UART interface, including PCMCIA and CF cards.
131
132 Say Y here to compile support for HCI UART (H4) protocol.
133
134config BT_HCIUART_NOKIA
135 tristate "UART Nokia H4+ protocol support"
136 depends on BT_HCIUART
137 depends on BT_HCIUART_SERDEV
138 depends on GPIOLIB
139 depends on PM
140 select BT_HCIUART_H4
141 select BT_BCM
142 help
143 Nokia H4+ is serial protocol for communication between Bluetooth
144 device and host. This protocol is required for Bluetooth devices
145 with UART interface in Nokia devices.
146
147 Say Y here to compile support for Nokia's H4+ protocol.
148
149config BT_HCIUART_BCSP
150 bool "BCSP protocol support"
151 depends on BT_HCIUART
152 select BITREVERSE
153 help
154 BCSP (BlueCore Serial Protocol) is serial protocol for communication
155 between Bluetooth device and host. This protocol is required for non
156 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
157 CF cards.
158
159 Say Y here to compile support for HCI BCSP protocol.
160
161config BT_HCIUART_ATH3K
162 bool "Atheros AR300x serial support"
163 depends on BT_HCIUART
164 select BT_HCIUART_H4
165 help
166 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
167 communication between host and Atheros AR300x Bluetooth devices.
168 This protocol enables AR300x chips to be enabled with
169 power management support.
170 Enable this if you have Atheros AR300x serial Bluetooth device.
171
172 Say Y here to compile support for HCI UART ATH3K protocol.
173
174config BT_HCIUART_LL
175 bool "HCILL protocol support"
176 depends on BT_HCIUART_SERDEV
177 select BT_HCIUART_H4
178 help
179 HCILL (HCI Low Level) is a serial protocol for communication
180 between Bluetooth device and host. This protocol is required for
181 serial Bluetooth devices that are based on Texas Instruments'
182 BRF chips.
183
184 Say Y here to compile support for HCILL protocol.
185
186config BT_HCIUART_3WIRE
187 bool "Three-wire UART (H5) protocol support"
188 depends on BT_HCIUART
189 depends on BT_HCIUART_SERDEV
190 help
191 The HCI Three-wire UART Transport Layer makes it possible to
192 user the Bluetooth HCI over a serial port interface. The HCI
193 Three-wire UART Transport Layer assumes that the UART
194 communication may have bit errors, overrun errors or burst
195 errors and thereby making CTS/RTS lines unnecessary.
196
197 Say Y here to compile support for Three-wire UART protocol.
198
199config BT_HCIUART_INTEL
200 bool "Intel protocol support"
201 depends on BT_HCIUART
202 depends on GPIOLIB
203 select BT_HCIUART_H4
204 select BT_INTEL
205 help
206 The Intel protocol support enables Bluetooth HCI over serial
207 port interface for Intel Bluetooth controllers.
208
209 Say Y here to compile support for Intel protocol.
210
211config BT_HCIUART_BCM
212 bool "Broadcom protocol support"
213 depends on BT_HCIUART
214 depends on BT_HCIUART_SERDEV
215 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
216 depends on GPIOLIB
217 select BT_HCIUART_H4
218 select BT_BCM
219 help
220 The Broadcom protocol support enables Bluetooth HCI over serial
221 port interface for Broadcom Bluetooth controllers.
222
223 Say Y here to compile support for Broadcom protocol.
224
225config BT_HCIUART_RTL
226 bool "Realtek protocol support"
227 depends on BT_HCIUART
228 depends on BT_HCIUART_SERDEV
229 depends on GPIOLIB
230 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
231 select BT_HCIUART_3WIRE
232 select BT_RTL
233 help
234 The Realtek protocol support enables Bluetooth HCI over 3-Wire
235 serial port interface for Realtek Bluetooth controllers.
236
237 Say Y here to compile support for Realtek protocol.
238
239config BT_HCIUART_QCA
240 bool "Qualcomm Atheros protocol support"
241 depends on BT_HCIUART
242 depends on BT_HCIUART_SERDEV
243 select BT_HCIUART_H4
244 select BT_QCA
245 help
246 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
247 over serial port interface(H4) between controller and host.
248 This protocol is required for UART clock control for QCA Bluetooth
249 devices.
250
251 Say Y here to compile support for QCA protocol.
252
253config BT_HCIUART_AG6XX
254 bool "Intel AG6XX protocol support"
255 depends on BT_HCIUART
256 select BT_HCIUART_H4
257 select BT_INTEL
258 help
259 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
260 port interface for Intel ibt 2.1 Bluetooth controllers.
261
262 Say Y here to compile support for Intel AG6XX protocol.
263
264config BT_HCIUART_MRVL
265 bool "Marvell protocol support"
266 depends on BT_HCIUART
267 depends on BT_HCIUART_SERDEV
268 select BT_HCIUART_H4
269 help
270 Marvell is serial protocol for communication between Bluetooth
271 device and host. This protocol is required for most Marvell Bluetooth
272 devices with UART interface.
273
274 Say Y here to compile support for HCI MRVL protocol.
275
276config BT_HCIBCM203X
277 tristate "HCI BCM203x USB driver"
278 depends on USB
279 select FW_LOADER
280 help
281 Bluetooth HCI BCM203x USB driver.
282 This driver provides the firmware loading mechanism for the Broadcom
283 Blutonium based devices.
284
285 Say Y here to compile support for HCI BCM203x devices into the
286 kernel or say M to compile it as module (bcm203x).
287
288
289config BT_HCIBCM4377
290 tristate "HCI BCM4377/4378/4387 PCIe driver"
291 depends on PCI
292 select FW_LOADER
293 help
294 Support for Broadcom BCM4377/4378/4387 Bluetooth chipsets attached via
295 PCIe. These are usually found in Apple machines.
296
297 Say Y here to compile support for HCI BCM4377 family devices into the
298 kernel or say M to compile it as module (hci_bcm4377).
299
300config BT_HCIBPA10X
301 tristate "HCI BPA10x USB driver"
302 depends on USB
303 help
304 Bluetooth HCI BPA10x USB driver.
305 This driver provides support for the Digianswer BPA 100/105 Bluetooth
306 sniffer devices.
307
308 Say Y here to compile support for HCI BPA10x devices into the
309 kernel or say M to compile it as module (bpa10x).
310
311config BT_HCIBFUSB
312 tristate "HCI BlueFRITZ! USB driver"
313 depends on USB
314 select FW_LOADER
315 help
316 Bluetooth HCI BlueFRITZ! USB driver.
317 This driver provides support for Bluetooth USB devices with AVM
318 interface:
319 AVM BlueFRITZ! USB
320
321 Say Y here to compile support for HCI BFUSB devices into the
322 kernel or say M to compile it as module (bfusb).
323
324config BT_HCIDTL1
325 tristate "HCI DTL1 (PC Card) driver"
326 depends on PCMCIA
327 help
328 Bluetooth HCI DTL1 (PC Card) driver.
329 This driver provides support for Bluetooth PCMCIA devices with
330 Nokia DTL1 interface:
331 Nokia Bluetooth Card
332 Socket Bluetooth CF Card
333
334 Say Y here to compile support for HCI DTL1 devices into the
335 kernel or say M to compile it as module (dtl1_cs).
336
337config BT_HCIBT3C
338 tristate "HCI BT3C (PC Card) driver"
339 depends on PCMCIA
340 select FW_LOADER
341 help
342 Bluetooth HCI BT3C (PC Card) driver.
343 This driver provides support for Bluetooth PCMCIA devices with
344 3Com BT3C interface:
345 3Com Bluetooth Card (3CRWB6096)
346 HP Bluetooth Card
347
348 Say Y here to compile support for HCI BT3C devices into the
349 kernel or say M to compile it as module (bt3c_cs).
350
351config BT_HCIBLUECARD
352 tristate "HCI BlueCard (PC Card) driver"
353 depends on PCMCIA
354 help
355 Bluetooth HCI BlueCard (PC Card) driver.
356 This driver provides support for Bluetooth PCMCIA devices with
357 Anycom BlueCard interface:
358 Anycom Bluetooth PC Card
359 Anycom Bluetooth CF Card
360
361 Say Y here to compile support for HCI BlueCard devices into the
362 kernel or say M to compile it as module (bluecard_cs).
363
364config BT_HCIVHCI
365 tristate "HCI VHCI (Virtual HCI device) driver"
366 help
367 Bluetooth Virtual HCI device driver.
368 This driver is required if you want to use HCI Emulation software.
369
370 Say Y here to compile support for virtual HCI devices into the
371 kernel or say M to compile it as module (hci_vhci).
372
373config BT_MRVL
374 tristate "Marvell Bluetooth driver support"
375 help
376 The core driver to support Marvell Bluetooth devices.
377
378 This driver is required if you want to support
379 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
380
381 Say Y here to compile Marvell Bluetooth driver
382 into the kernel or say M to compile it as module.
383
384config BT_MRVL_SDIO
385 tristate "Marvell BT-over-SDIO driver"
386 depends on BT_MRVL && MMC
387 select FW_LOADER
388 select WANT_DEV_COREDUMP
389 help
390 The driver for Marvell Bluetooth chipsets with SDIO interface.
391
392 This driver is required if you want to use Marvell Bluetooth
393 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
394 chipsets are supported.
395
396 Say Y here to compile support for Marvell BT-over-SDIO driver
397 into the kernel or say M to compile it as module.
398
399config BT_ATH3K
400 tristate "Atheros firmware download driver"
401 depends on BT_HCIBTUSB
402 select FW_LOADER
403 help
404 Bluetooth firmware download driver.
405 This driver loads the firmware into the Atheros Bluetooth
406 chipset.
407
408 Say Y here to compile support for "Atheros firmware download driver"
409 into the kernel or say M to compile it as module (ath3k).
410
411config BT_MTKSDIO
412 tristate "MediaTek HCI SDIO driver"
413 depends on MMC
414 select BT_MTK
415 help
416 MediaTek Bluetooth HCI SDIO driver.
417 This driver is required if you want to use MediaTek Bluetooth
418 with SDIO interface.
419
420 Say Y here to compile support for MediaTek Bluetooth SDIO devices
421 into the kernel or say M to compile it as module (btmtksdio).
422
423config BT_MTKUART
424 tristate "MediaTek HCI UART driver"
425 depends on SERIAL_DEV_BUS
426 select BT_MTK
427 help
428 MediaTek Bluetooth HCI UART driver.
429 This driver is required if you want to use MediaTek Bluetooth
430 with serial interface.
431
432 Say Y here to compile support for MediaTek Bluetooth UART devices
433 into the kernel or say M to compile it as module (btmtkuart).
434
435config BT_QCOMSMD
436 tristate "Qualcomm SMD based HCI support"
437 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
438 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
439 select BT_QCA
440 help
441 Qualcomm SMD based HCI driver.
442 This driver is used to bridge HCI data onto the shared memory
443 channels to the WCNSS core.
444
445 Say Y here to compile support for HCI over Qualcomm SMD into the
446 kernel or say M to compile as a module.
447
448config BT_HCIRSI
449 tristate
450 help
451 Redpine BT driver.
452 This driver handles BT traffic from upper layers and pass
453 to the RSI_91x coex module for further scheduling to device
454
455 Say Y here to compile support for HCI over Redpine into the
456 kernel or say M to compile as a module.
457
458config BT_VIRTIO
459 tristate "Virtio Bluetooth driver"
460 depends on VIRTIO
461 help
462 Virtio Bluetooth support driver.
463 This driver supports Virtio Bluetooth devices.
464
465 Say Y here to compile support for HCI over Virtio into the
466 kernel or say M to compile as a module.
467
468endmenu
1
2menu "Bluetooth device drivers"
3 depends on BT
4
5config BT_INTEL
6 tristate
7 select REGMAP
8
9config BT_BCM
10 tristate
11 select FW_LOADER
12
13config BT_RTL
14 tristate
15 select FW_LOADER
16
17config BT_QCA
18 tristate
19 select FW_LOADER
20
21config BT_HCIBTUSB
22 tristate "HCI USB driver"
23 depends on USB
24 select BT_INTEL
25 help
26 Bluetooth HCI USB driver.
27 This driver is required if you want to use Bluetooth devices with
28 USB interface.
29
30 Say Y here to compile support for Bluetooth USB devices into the
31 kernel or say M to compile it as module (btusb).
32
33config BT_HCIBTUSB_BCM
34 bool "Broadcom protocol support"
35 depends on BT_HCIBTUSB
36 select BT_BCM
37 default y
38 help
39 The Broadcom protocol support enables firmware and patchram
40 download support for Broadcom Bluetooth controllers.
41
42 Say Y here to compile support for Broadcom protocol.
43
44config BT_HCIBTUSB_RTL
45 bool "Realtek protocol support"
46 depends on BT_HCIBTUSB
47 select BT_RTL
48 default y
49 help
50 The Realtek protocol support enables firmware and configuration
51 download support for Realtek Bluetooth controllers.
52
53 Say Y here to compile support for Realtek protocol.
54
55config BT_HCIBTSDIO
56 tristate "HCI SDIO driver"
57 depends on MMC
58 help
59 Bluetooth HCI SDIO driver.
60 This driver is required if you want to use Bluetooth device with
61 SDIO interface.
62
63 Say Y here to compile support for Bluetooth SDIO devices into the
64 kernel or say M to compile it as module (btsdio).
65
66config BT_HCIUART
67 tristate "HCI UART driver"
68 depends on TTY
69 help
70 Bluetooth HCI UART driver.
71 This driver is required if you want to use Bluetooth devices with
72 serial port interface. You will also need this driver if you have
73 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
74 adapter and BrainBoxes Bluetooth PC Card.
75
76 Say Y here to compile support for Bluetooth UART devices into the
77 kernel or say M to compile it as module (hci_uart).
78
79config BT_HCIUART_H4
80 bool "UART (H4) protocol support"
81 depends on BT_HCIUART
82 help
83 UART (H4) is serial protocol for communication between Bluetooth
84 device and host. This protocol is required for most Bluetooth devices
85 with UART interface, including PCMCIA and CF cards.
86
87 Say Y here to compile support for HCI UART (H4) protocol.
88
89config BT_HCIUART_BCSP
90 bool "BCSP protocol support"
91 depends on BT_HCIUART
92 select BITREVERSE
93 help
94 BCSP (BlueCore Serial Protocol) is serial protocol for communication
95 between Bluetooth device and host. This protocol is required for non
96 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
97 CF cards.
98
99 Say Y here to compile support for HCI BCSP protocol.
100
101config BT_HCIUART_ATH3K
102 bool "Atheros AR300x serial support"
103 depends on BT_HCIUART
104 select BT_HCIUART_H4
105 help
106 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
107 communication between host and Atheros AR300x Bluetooth devices.
108 This protocol enables AR300x chips to be enabled with
109 power management support.
110 Enable this if you have Atheros AR300x serial Bluetooth device.
111
112 Say Y here to compile support for HCI UART ATH3K protocol.
113
114config BT_HCIUART_LL
115 bool "HCILL protocol support"
116 depends on BT_HCIUART
117 help
118 HCILL (HCI Low Level) is a serial protocol for communication
119 between Bluetooth device and host. This protocol is required for
120 serial Bluetooth devices that are based on Texas Instruments'
121 BRF chips.
122
123 Say Y here to compile support for HCILL protocol.
124
125config BT_HCIUART_3WIRE
126 bool "Three-wire UART (H5) protocol support"
127 depends on BT_HCIUART
128 help
129 The HCI Three-wire UART Transport Layer makes it possible to
130 user the Bluetooth HCI over a serial port interface. The HCI
131 Three-wire UART Transport Layer assumes that the UART
132 communication may have bit errors, overrun errors or burst
133 errors and thereby making CTS/RTS lines unnecessary.
134
135 Say Y here to compile support for Three-wire UART protocol.
136
137config BT_HCIUART_INTEL
138 bool "Intel protocol support"
139 depends on BT_HCIUART
140 select BT_HCIUART_H4
141 select BT_INTEL
142 help
143 The Intel protocol support enables Bluetooth HCI over serial
144 port interface for Intel Bluetooth controllers.
145
146 Say Y here to compile support for Intel protocol.
147
148config BT_HCIUART_BCM
149 bool "Broadcom protocol support"
150 depends on BT_HCIUART
151 select BT_HCIUART_H4
152 select BT_BCM
153 help
154 The Broadcom protocol support enables Bluetooth HCI over serial
155 port interface for Broadcom Bluetooth controllers.
156
157 Say Y here to compile support for Broadcom protocol.
158
159config BT_HCIUART_QCA
160 bool "Qualcomm Atheros protocol support"
161 depends on BT_HCIUART
162 select BT_HCIUART_H4
163 select BT_QCA
164 help
165 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
166 over serial port interface(H4) between controller and host.
167 This protocol is required for UART clock control for QCA Bluetooth
168 devices.
169
170 Say Y here to compile support for QCA protocol.
171
172config BT_HCIUART_AG6XX
173 bool "Intel AG6XX protocol support"
174 depends on BT_HCIUART
175 select BT_HCIUART_H4
176 select BT_INTEL
177 help
178 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
179 port interface for Intel ibt 2.1 Bluetooth controllers.
180
181 Say Y here to compile support for Intel AG6XX protocol.
182
183config BT_HCIBCM203X
184 tristate "HCI BCM203x USB driver"
185 depends on USB
186 select FW_LOADER
187 help
188 Bluetooth HCI BCM203x USB driver.
189 This driver provides the firmware loading mechanism for the Broadcom
190 Blutonium based devices.
191
192 Say Y here to compile support for HCI BCM203x devices into the
193 kernel or say M to compile it as module (bcm203x).
194
195config BT_HCIBPA10X
196 tristate "HCI BPA10x USB driver"
197 depends on USB && BT_HCIUART
198 select BT_HCIUART_H4
199 help
200 Bluetooth HCI BPA10x USB driver.
201 This driver provides support for the Digianswer BPA 100/105 Bluetooth
202 sniffer devices.
203
204 Say Y here to compile support for HCI BPA10x devices into the
205 kernel or say M to compile it as module (bpa10x).
206
207config BT_HCIBFUSB
208 tristate "HCI BlueFRITZ! USB driver"
209 depends on USB
210 select FW_LOADER
211 help
212 Bluetooth HCI BlueFRITZ! USB driver.
213 This driver provides support for Bluetooth USB devices with AVM
214 interface:
215 AVM BlueFRITZ! USB
216
217 Say Y here to compile support for HCI BFUSB devices into the
218 kernel or say M to compile it as module (bfusb).
219
220config BT_HCIDTL1
221 tristate "HCI DTL1 (PC Card) driver"
222 depends on PCMCIA
223 help
224 Bluetooth HCI DTL1 (PC Card) driver.
225 This driver provides support for Bluetooth PCMCIA devices with
226 Nokia DTL1 interface:
227 Nokia Bluetooth Card
228 Socket Bluetooth CF Card
229
230 Say Y here to compile support for HCI DTL1 devices into the
231 kernel or say M to compile it as module (dtl1_cs).
232
233config BT_HCIBT3C
234 tristate "HCI BT3C (PC Card) driver"
235 depends on PCMCIA
236 select FW_LOADER
237 help
238 Bluetooth HCI BT3C (PC Card) driver.
239 This driver provides support for Bluetooth PCMCIA devices with
240 3Com BT3C interface:
241 3Com Bluetooth Card (3CRWB6096)
242 HP Bluetooth Card
243
244 Say Y here to compile support for HCI BT3C devices into the
245 kernel or say M to compile it as module (bt3c_cs).
246
247config BT_HCIBLUECARD
248 tristate "HCI BlueCard (PC Card) driver"
249 depends on PCMCIA
250 help
251 Bluetooth HCI BlueCard (PC Card) driver.
252 This driver provides support for Bluetooth PCMCIA devices with
253 Anycom BlueCard interface:
254 Anycom Bluetooth PC Card
255 Anycom Bluetooth CF Card
256
257 Say Y here to compile support for HCI BlueCard devices into the
258 kernel or say M to compile it as module (bluecard_cs).
259
260config BT_HCIBTUART
261 tristate "HCI UART (PC Card) device driver"
262 depends on PCMCIA
263 help
264 Bluetooth HCI UART (PC Card) driver.
265 This driver provides support for Bluetooth PCMCIA devices with
266 an UART interface:
267 Xircom CreditCard Bluetooth Adapter
268 Xircom RealPort2 Bluetooth Adapter
269 Sphinx PICO Card
270 H-Soft blue+Card
271 Cyber-blue Compact Flash Card
272
273 Say Y here to compile support for HCI UART devices into the
274 kernel or say M to compile it as module (btuart_cs).
275
276config BT_HCIVHCI
277 tristate "HCI VHCI (Virtual HCI device) driver"
278 help
279 Bluetooth Virtual HCI device driver.
280 This driver is required if you want to use HCI Emulation software.
281
282 Say Y here to compile support for virtual HCI devices into the
283 kernel or say M to compile it as module (hci_vhci).
284
285config BT_MRVL
286 tristate "Marvell Bluetooth driver support"
287 help
288 The core driver to support Marvell Bluetooth devices.
289
290 This driver is required if you want to support
291 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
292
293 Say Y here to compile Marvell Bluetooth driver
294 into the kernel or say M to compile it as module.
295
296config BT_MRVL_SDIO
297 tristate "Marvell BT-over-SDIO driver"
298 depends on BT_MRVL && MMC
299 select FW_LOADER
300 select WANT_DEV_COREDUMP
301 help
302 The driver for Marvell Bluetooth chipsets with SDIO interface.
303
304 This driver is required if you want to use Marvell Bluetooth
305 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
306 chipsets are supported.
307
308 Say Y here to compile support for Marvell BT-over-SDIO driver
309 into the kernel or say M to compile it as module.
310
311config BT_ATH3K
312 tristate "Atheros firmware download driver"
313 depends on BT_HCIBTUSB
314 select FW_LOADER
315 help
316 Bluetooth firmware download driver.
317 This driver loads the firmware into the Atheros Bluetooth
318 chipset.
319
320 Say Y here to compile support for "Atheros firmware download driver"
321 into the kernel or say M to compile it as module (ath3k).
322
323config BT_WILINK
324 tristate "Texas Instruments WiLink7 driver"
325 depends on TI_ST
326 help
327 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
328 combo devices. This makes use of shared transport line discipline
329 core driver to communicate with the BT core of the combo chip.
330
331 Say Y here to compile support for Texas Instrument's WiLink7 driver
332 into the kernel or say M to compile it as module (btwilink).
333
334endmenu