1/*
  2 * Copyright 2015 Gábor Nyers
  3 *
  4 * Gábor Nyers <gabor.nyers@gmail.com>
  5 *
  6 * This file is dual-licensed: you can use it either under the terms
  7 * of the GPL or the X11 license, at your option. Note that this dual
  8 * licensing only applies to this file, and not this project as a
  9 * whole.
 10 *
 11 *  a) This file is free software; you can redistribute it and/or
 12 *     modify it under the terms of the GNU General Public License as
 13 *     published by the Free Software Foundation; either version 2 of the
 14 *     License, or (at your option) any later version.
 15 *
 16 *     This file is distributed in the hope that it will be useful,
 17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 19 *     GNU General Public License for more details.
 20 *
 21 * Or, alternatively,
 22 *
 23 *  b) Permission is hereby granted, free of charge, to any person
 24 *     obtaining a copy of this software and associated documentation
 25 *     files (the "Software"), to deal in the Software without
 26 *     restriction, including without limitation the rights to use,
 27 *     copy, modify, merge, publish, distribute, sublicense, and/or
 28 *     sell copies of the Software, and to permit persons to whom the
 29 *     Software is furnished to do so, subject to the following
 30 *     conditions:
 31 *
 32 *     The above copyright notice and this permission notice shall be
 33 *     included in all copies or substantial portions of the Software.
 34 *
 35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 42 *     OTHER DEALINGS IN THE SOFTWARE.
 43 */
 44
 45/dts-v1/;
 46#include "sun4i-a10.dtsi"
 47#include "sunxi-common-regulators.dtsi"
 48
 49#include <dt-bindings/gpio/gpio.h>
 
 50
 51/ {
 52	model = "Jesurun Q5";
 53	compatible = "jesurun,q5", "allwinner,sun4i-a10";
 54
 55	aliases {
 56		serial0 = &uart0;
 57	};
 58
 59	chosen {
 60		stdout-path = "serial0:115200n8";
 61	};
 62
 63	leds {
 64		compatible = "gpio-leds";
 
 
 65
 66		led {
 67			label = "q5:green:usr";
 68			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
 69		};
 70
 71	};
 72
 73	reg_emac_3v3: emac-3v3 {
 74		compatible = "regulator-fixed";
 
 
 75		regulator-name = "emac-3v3";
 76		regulator-min-microvolt = <3300000>;
 77		regulator-max-microvolt = <3300000>;
 78		startup-delay-us = <20000>;
 79		enable-active-high;
 80		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
 81	};
 82};
 83
 84&ahci {
 85	status = "okay";
 86};
 87
 88&ehci0 {
 89	status = "okay";
 90};
 91
 92&ehci1 {
 93	status = "okay";
 94};
 95
 96&emac {
 97	phy-handle = <&phy1>;
 
 
 98	status = "okay";
 99};
100
101&emac_sram {
102	status = "okay";
103};
104
105&i2c0 {
 
 
106	status = "okay";
107
108	axp209: pmic@34 {
109		compatible = "x-powers,axp209";
110		reg = <0x34>;
111		interrupts = <0>;
112
113		interrupt-controller;
114		#interrupt-cells = <1>;
115	};
116};
117
118&ir0 {
119	pinctrl-names = "default";
120	pinctrl-0 = <&ir0_rx_pins>;
121	status = "okay";
122};
123
124&mdio {
125	phy-supply = <&reg_emac_3v3>;
126	status = "okay";
127
128	phy1: ethernet-phy@1 {
129		reg = <1>;
130	};
131};
132
133&mmc0 {
 
 
134	vmmc-supply = <&reg_vcc3v3>;
135	bus-width = <4>;
136	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
 
137	status = "okay";
138};
139
140&ohci0 {
141	status = "okay";
142};
143
144&ohci1 {
145	status = "okay";
146};
147
148&otg_sram {
149	status = "okay";
150};
151
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
152&reg_usb0_vbus {
153	regulator-boot-on;
154	status = "okay";
155};
156
157&reg_usb1_vbus {
158	status = "okay";
159};
160
161&reg_usb2_vbus {
162	status = "okay";
163};
164
165&uart0 {
166	pinctrl-names = "default";
167	pinctrl-0 = <&uart0_pb_pins>;
168	status = "okay";
169};
170
171&usb_otg {
172	dr_mode = "host";
173	status = "okay";
174};
175
176&usbphy {
177	usb0_vbus-supply = <&reg_usb0_vbus>;
178	usb1_vbus-supply = <&reg_usb1_vbus>;
179	usb2_vbus-supply = <&reg_usb2_vbus>;
180	status = "okay";
181};

  1/*
  2 * Copyright 2015 Gábor Nyers
  3 *
  4 * Gábor Nyers <gabor.nyers@gmail.com>
  5 *
  6 * This file is dual-licensed: you can use it either under the terms
  7 * of the GPL or the X11 license, at your option. Note that this dual
  8 * licensing only applies to this file, and not this project as a
  9 * whole.
 10 *
 11 *  a) This file is free software; you can redistribute it and/or
 12 *     modify it under the terms of the GNU General Public License as
 13 *     published by the Free Software Foundation; either version 2 of the
 14 *     License, or (at your option) any later version.
 15 *
 16 *     This file is distributed in the hope that it will be useful,
 17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 19 *     GNU General Public License for more details.
 20 *
 21 * Or, alternatively,
 22 *
 23 *  b) Permission is hereby granted, free of charge, to any person
 24 *     obtaining a copy of this software and associated documentation
 25 *     files (the "Software"), to deal in the Software without
 26 *     restriction, including without limitation the rights to use,
 27 *     copy, modify, merge, publish, distribute, sublicense, and/or
 28 *     sell copies of the Software, and to permit persons to whom the
 29 *     Software is furnished to do so, subject to the following
 30 *     conditions:
 31 *
 32 *     The above copyright notice and this permission notice shall be
 33 *     included in all copies or substantial portions of the Software.
 34 *
 35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 42 *     OTHER DEALINGS IN THE SOFTWARE.
 43 */
 44
 45/dts-v1/;
 46#include "sun4i-a10.dtsi"
 47#include "sunxi-common-regulators.dtsi"
 48
 49#include <dt-bindings/gpio/gpio.h>
 50#include <dt-bindings/pinctrl/sun4i-a10.h>
 51
 52/ {
 53	model = "Jesurun Q5";
 54	compatible = "jesurun,q5", "allwinner,sun4i-a10";
 55
 56	aliases {
 57		serial0 = &uart0;
 58	};
 59
 60	chosen {
 61		stdout-path = "serial0:115200n8";
 62	};
 63
 64	leds {
 65		compatible = "gpio-leds";
 66		pinctrl-names = "default";
 67		pinctrl-0 = <&led_pins_q5>;
 68
 69		green {
 70			label = "q5:green:usr";
 71			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
 72		};
 73
 74	};
 75
 76	reg_emac_3v3: emac-3v3 {
 77		compatible = "regulator-fixed";
 78		pinctrl-names = "default";
 79		pinctrl-0 = <&emac_power_pin_q5>;
 80		regulator-name = "emac-3v3";
 81		regulator-min-microvolt = <3300000>;
 82		regulator-max-microvolt = <3300000>;
 
 83		enable-active-high;
 84		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
 85	};
 86};
 87
 88&ahci {
 89	status = "okay";
 90};
 91
 92&ehci0 {
 93	status = "okay";
 94};
 95
 96&ehci1 {
 97	status = "okay";
 98};
 99
100&emac {
101	pinctrl-names = "default";
102	pinctrl-0 = <&emac_pins_a>;
103	phy = <&phy1>;
104	status = "okay";
105};
106
107&emac_sram {
108	status = "okay";
109};
110
111&i2c0 {
112	pinctrl-names = "default";
113	pinctrl-0 = <&i2c0_pins_a>;
114	status = "okay";
115
116	axp209: pmic@34 {
117		compatible = "x-powers,axp209";
118		reg = <0x34>;
119		interrupts = <0>;
120
121		interrupt-controller;
122		#interrupt-cells = <1>;
123	};
124};
125
126&ir0 {
127	pinctrl-names = "default";
128	pinctrl-0 = <&ir0_rx_pins_a>;
129	status = "okay";
130};
131
132&mdio {
133	phy-supply = <&reg_emac_3v3>;
134	status = "okay";
135
136	phy1: ethernet-phy@1 {
137		reg = <1>;
138	};
139};
140
141&mmc0 {
142	pinctrl-names = "default";
143	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
144	vmmc-supply = <&reg_vcc3v3>;
145	bus-width = <4>;
146	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
147	cd-inverted;
148	status = "okay";
149};
150
151&ohci0 {
152	status = "okay";
153};
154
155&ohci1 {
156	status = "okay";
157};
158
159&otg_sram {
160	status = "okay";
161};
162
163&pio {
164	emac_power_pin_q5: emac_power_pin@0 {
165		allwinner,pins = "PH19";
166		allwinner,function = "gpio_out";
167		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
168		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
169	};
170
171	led_pins_q5: led_pins@0 {
172		allwinner,pins = "PH20";
173		allwinner,function = "gpio_out";
174		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
175		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
176	};
177};
178
179&reg_usb0_vbus {
180	regulator-boot-on;
181	status = "okay";
182};
183
184&reg_usb1_vbus {
185	status = "okay";
186};
187
188&reg_usb2_vbus {
189	status = "okay";
190};
191
192&uart0 {
193	pinctrl-names = "default";
194	pinctrl-0 = <&uart0_pins_a>;
195	status = "okay";
196};
197
198&usb_otg {
199	dr_mode = "host";
200	status = "okay";
201};
202
203&usbphy {
204	usb0_vbus-supply = <&reg_usb0_vbus>;
205	usb1_vbus-supply = <&reg_usb1_vbus>;
206	usb2_vbus-supply = <&reg_usb2_vbus>;
207	status = "okay";
208};