Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Support for CompuLab CM-T3730
4 */
5/dts-v1/;
6
7#include "omap36xx.dtsi"
8#include "omap3-cm-t3x30.dtsi"
9
10/ {
11 model = "CompuLab CM-T3730";
12 compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
13
14 wl12xx_vmmc2: wl12xx_vmmc2 {
15 compatible = "regulator-fixed";
16 regulator-name = "vw1271";
17 pinctrl-names = "default";
18 pinctrl-0 = <&wl12xx_gpio>;
19 regulator-min-microvolt = <1800000>;
20 regulator-max-microvolt = <1800000>;
21 gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */
22 startup-delay-us = <20000>;
23 enable-active-high;
24 };
25
26 wl12xx_vaux2: wl12xx_vaux2 {
27 compatible = "regulator-fixed";
28 regulator-name = "vwl1271_vaux2";
29 regulator-min-microvolt = <1800000>;
30 regulator-max-microvolt = <1800000>;
31 vin-supply = <&vaux2>;
32 };
33};
34
35&omap3_pmx_wkup {
36 dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
37 pinctrl-single,pins = <
38 OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
39 OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
40 OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
41 OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
42 OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
43 OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
44 >;
45 };
46};
47
48&omap3_pmx_core {
49
50 mmc2_pins: pinmux_mmc2_pins {
51 pinctrl-single,pins = <
52 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
53 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
54 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
55 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
56 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
57 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
58 >;
59 };
60
61 wl12xx_gpio: pinmux_wl12xx_gpio {
62 pinctrl-single,pins = <
63 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
64 OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
65 >;
66 };
67};
68
69&mmc2 {
70 pinctrl-names = "default";
71 pinctrl-0 = <&mmc2_pins>;
72 vmmc-supply = <&wl12xx_vmmc2>;
73 vqmmc-supply = <&wl12xx_vaux2>;
74 non-removable;
75 bus-width = <4>;
76 cap-power-off-card;
77
78 #address-cells = <1>;
79 #size-cells = <0>;
80 wlcore: wlcore@2 {
81 compatible = "ti,wl1271";
82 reg = <2>;
83 interrupt-parent = <&gpio5>;
84 interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
85 ref-clock-frequency = <38400000>;
86 };
87};
88
89&dss {
90 status = "okay";
91
92 pinctrl-names = "default";
93 pinctrl-0 = <
94 &dss_dpi_pins_common
95 &dss_dpi_pins_cm_t3730
96 >;
97};
98
1/*
2 * Support for CompuLab CM-T3730
3 */
4/dts-v1/;
5
6#include "omap36xx.dtsi"
7#include "omap3-cm-t3x30.dtsi"
8
9/ {
10 model = "CompuLab CM-T3730";
11 compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
12
13 wl12xx_vmmc2: wl12xx_vmmc2 {
14 compatible = "regulator-fixed";
15 regulator-name = "vw1271";
16 pinctrl-names = "default";
17 pinctrl-0 = <&wl12xx_gpio>;
18 regulator-min-microvolt = <1800000>;
19 regulator-max-microvolt = <1800000>;
20 gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */
21 startup-delay-us = <20000>;
22 enable-active-high;
23 };
24
25 wl12xx_vaux2: wl12xx_vaux2 {
26 compatible = "regulator-fixed";
27 regulator-name = "vwl1271_vaux2";
28 regulator-min-microvolt = <1800000>;
29 regulator-max-microvolt = <1800000>;
30 vin-supply = <&vaux2>;
31 };
32};
33
34&omap3_pmx_wkup {
35 dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
36 pinctrl-single,pins = <
37 OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
38 OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
39 OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
40 OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
41 OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
42 OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
43 >;
44 };
45};
46
47&omap3_pmx_core {
48
49 mmc2_pins: pinmux_mmc2_pins {
50 pinctrl-single,pins = <
51 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
52 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
53 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
54 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
55 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
56 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
57 >;
58 };
59
60 wl12xx_gpio: pinmux_wl12xx_gpio {
61 pinctrl-single,pins = <
62 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
63 OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
64 >;
65 };
66};
67
68&mmc2 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&mmc2_pins>;
71 vmmc-supply = <&wl12xx_vmmc2>;
72 vmmc_aux-supply = <&wl12xx_vaux2>;
73 non-removable;
74 bus-width = <4>;
75 cap-power-off-card;
76
77 #address-cells = <1>;
78 #size-cells = <0>;
79 wlcore: wlcore@2 {
80 compatible = "ti,wl1271";
81 reg = <2>;
82 interrupt-parent = <&gpio5>;
83 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
84 ref-clock-frequency = <38400000>;
85 };
86};
87
88&dss {
89 status = "ok";
90
91 pinctrl-names = "default";
92 pinctrl-0 = <
93 &dss_dpi_pins_common
94 &dss_dpi_pins_cm_t3730
95 >;
96};
97