1// SPDX-License-Identifier: GPL-2.0 OR MIT
 2/*
 3 * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 4 */
 5
 6/dts-v1/;
 7#include <dt-bindings/gpio/gpio.h>
 8#include "meson8.dtsi"
 9
10/ {
11	model = "MINIX NEO-X8";
12	compatible = "minix,neo-x8", "amlogic,meson8";
13
14	aliases {
15		serial0 = &uart_AO;
16	};
17
18	chosen {
19		stdout-path = "serial0:115200n8";
20	};
21
22	memory {
23		device_type = "memory";
24		reg = <0x40000000 0x80000000>;
25	};
26
27	gpio-leds {
28		compatible = "gpio-leds";
29
30		blue {
31			label = "x8:blue:power";
32			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
33		};
34	};
35};
36
37&uart_AO {
38	status = "okay";
39	pinctrl-0 = <&uart_ao_a_pins>;
40	pinctrl-names = "default";
41};
42
43&i2c_AO {
44	status = "okay";
45	pinctrl-0 = <&i2c_ao_pins>;
46	pinctrl-names = "default";
47
48	pmic@32 {
49		compatible = "ricoh,rn5t618";
50		reg = <0x32>;
51		system-power-controller;
52
53		regulators {
54		};
55	};
56
57	rtc@51 {
58		compatible = "nxp,pcf8563";
59		reg = <0x51>;
60	};
61};
62
63&spifc {
64	status = "okay";
65	pinctrl-0 = <&spi_nor_pins>;
66	pinctrl-names = "default";
67
68	flash@0 {
69		compatible = "mxicy,mx25l1606e";
70		#address-cells = <1>;
71		#size-cells = <1>;
72		reg = <0>;
73		spi-max-frequency = <30000000>;
74
75		partition@0 {
76			label = "boot";
77			reg = <0x0 0x100000>;
78		};
79
80		partition@100000 {
81			label = "env";
82			reg = <0x100000 0x10000>;
83		};
84	};
85};
86
87&ir_receiver {
88	status = "okay";
89	pinctrl-0 = <&ir_recv_pins>;
90	pinctrl-names = "default";
91};
92
93&ethmac {
94	status = "okay";
95	pinctrl-0 = <&eth_pins>;
96	pnictrl-names = "default";
97};

 
  1/*
  2 * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
  3 *
  4 * This file is dual-licensed: you can use it either under the terms
  5 * of the GPL or the X11 license, at your option. Note that this dual
  6 * licensing only applies to this file, and not this project as a
  7 * whole.
  8 *
  9 *  a) This library is free software; you can redistribute it and/or
 10 *     modify it under the terms of the GNU General Public License as
 11 *     published by the Free Software Foundation; either version 2 of the
 12 *     License, or (at your option) any later version.
 13 *
 14 *     This library is distributed in the hope that it will be useful,
 15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 17 *     GNU General Public License for more details.
 18 *
 19 * Or, alternatively,
 20 *
 21 *  b) Permission is hereby granted, free of charge, to any person
 22 *     obtaining a copy of this software and associated documentation
 23 *     files (the "Software"), to deal in the Software without
 24 *     restriction, including without limitation the rights to use,
 25 *     copy, modify, merge, publish, distribute, sublicense, and/or
 26 *     sell copies of the Software, and to permit persons to whom the
 27 *     Software is furnished to do so, subject to the following
 28 *     conditions:
 29 *
 30 *     The above copyright notice and this permission notice shall be
 31 *     included in all copies or substantial portions of the Software.
 32 *
 33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 40 *     OTHER DEALINGS IN THE SOFTWARE.
 41 */
 42
 43/dts-v1/;
 44#include <dt-bindings/gpio/gpio.h>
 45#include "meson8.dtsi"
 46
 47/ {
 48	model = "MINIX NEO-X8";
 49	compatible = "minix,neo-x8", "amlogic,meson8";
 50
 51	aliases {
 52		serial0 = &uart_AO;
 53	};
 54
 
 
 
 
 55	memory {
 
 56		reg = <0x40000000 0x80000000>;
 57	};
 58
 59	gpio-leds {
 60		compatible = "gpio-leds";
 61
 62		blue {
 63			label = "x8:blue:power";
 64			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
 65		};
 66	};
 67};
 68
 69&uart_AO {
 70	status = "okay";
 71	pinctrl-0 = <&uart_ao_a_pins>;
 72	pinctrl-names = "default";
 73};
 74
 75&i2c_AO {
 76	status = "okay";
 77	pinctrl-0 = <&i2c_ao_pins>;
 78	pinctrl-names = "default";
 79
 80	pmic@32 {
 81		compatible = "ricoh,rn5t618";
 82		reg = <0x32>;
 
 83
 84		regulators {
 85		};
 86	};
 87
 88	rtc@51 {
 89		compatible = "nxp,pcf8563";
 90		reg = <0x51>;
 91	};
 92};
 93
 94&spifc {
 95	status = "okay";
 96	pinctrl-0 = <&spi_nor_pins>;
 97	pinctrl-names = "default";
 98
 99	spi-flash@0 {
100		compatible = "mxicy,mx25l1606e";
101		#address-cells = <1>;
102		#size-cells = <1>;
103		reg = <0>;
104		spi-max-frequency = <30000000>;
105
106		partition@0 {
107			label = "boot";
108			reg = <0x0 0x100000>;
109		};
110
111		partition@100000 {
112			label = "env";
113			reg = <0x100000 0x10000>;
114		};
115	};
116};
117
118&ir_receiver {
119	status = "okay";
120	pinctrl-0 = <&ir_recv_pins>;
121	pinctrl-names = "default";
122};
123
124&ethmac {
125	status = "okay";
126	pinctrl-0 = <&eth_pins>;
127	pnictrl-names = "default";
128};