Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8 model = "MPL CEC4";
9 compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x20000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 };
20
21 ocp@f1000000 {
22 pinctrl: pin-controller@10000 {
23 pmx_led_health: pmx-led-health {
24 marvell,pins = "mpp7";
25 marvell,function = "gpo";
26 };
27
28 pmx_sata1: pmx-sata1 {
29 marvell,pins = "mpp34";
30 marvell,function = "sata1";
31 };
32
33 pmx_sata0: pmx-sata0 {
34 marvell,pins = "mpp35";
35 marvell,function = "sata0";
36 };
37
38 pmx_led_user1o: pmx-led-user1o {
39 marvell,pins = "mpp40";
40 marvell,function = "gpio";
41 };
42
43 pmx_led_user1g: pmx-led-user1g {
44 marvell,pins = "mpp41";
45 marvell,function = "gpio";
46 };
47
48 pmx_led_user0o: pmx-led-user0o {
49 marvell,pins = "mpp44";
50 marvell,function = "gpio";
51 };
52
53 pmx_led_user0g: pmx-led-user0g {
54 marvell,pins = "mpp45";
55 marvell,function = "gpio";
56 };
57
58 pmx_led_misc: pmx-led-misc {
59 marvell,pins = "mpp46";
60 marvell,function = "gpio";
61 };
62
63 pmx_sdio_cd: pmx-sdio-cd {
64 marvell,pins = "mpp47";
65 marvell,function = "gpio";
66 };
67 };
68
69 i2c@11000 {
70 status = "okay";
71
72 rtc@51 {
73 compatible = "nxp,pcf8563";
74 reg = <0x51>;
75 };
76
77 eeprom@57 {
78 compatible = "atmel,24c02";
79 reg = <0x57>;
80 };
81
82 };
83
84 serial@12000 {
85 status = "okay";
86 };
87
88 rtc@10300 {
89 status = "disabled";
90 };
91
92 sata@80000 {
93 pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
94 pinctrl-names = "default";
95 nr-ports = <2>;
96 status = "okay";
97 };
98
99 mvsdio@90000 {
100 pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
101 pinctrl-names = "default";
102 status = "okay";
103 cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
104 /* No WP GPIO */
105 };
106 };
107
108 gpio-leds {
109 compatible = "gpio-leds";
110 pinctrl-0 = < &pmx_led_health
111 &pmx_led_user1o
112 &pmx_led_user1g &pmx_led_user0o
113 &pmx_led_user0g &pmx_led_misc
114 >;
115 pinctrl-names = "default";
116
117 health {
118 label = "status:green:health";
119 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
120 };
121
122 user1o {
123 label = "user1:orange";
124 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
125 default-state = "on";
126 };
127
128 user1g {
129 label = "user1:green";
130 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
131 default-state = "on";
132 };
133
134 user0o {
135 label = "user0:orange";
136 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
137 default-state = "on";
138 };
139
140 user0g {
141 label = "user0:green";
142 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
143 default-state = "on";
144 };
145
146 misc {
147 label = "status:orange:misc";
148 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
149 default-state = "on";
150 };
151
152 };
153};
154
155&nand {
156 status = "okay";
157
158 partition@0 {
159 label = "uboot";
160 reg = <0x0000000 0x100000>;
161 };
162
163 partition@100000 {
164 label = "env";
165 reg = <0x100000 0x80000>;
166 };
167
168 partition@180000 {
169 label = "fdt";
170 reg = <0x180000 0x80000>;
171 };
172
173 partition@200000 {
174 label = "kernel";
175 reg = <0x200000 0x400000>;
176 };
177
178 partition@600000 {
179 label = "rootfs";
180 reg = <0x600000 0x1fa00000>;
181 };
182};
183
184&mdio {
185 status = "okay";
186
187 ethphy0: ethernet-phy@1 {
188 reg = <1>;
189 };
190
191 ethphy1: ethernet-phy@2 {
192 reg = <2>;
193 };
194};
195
196ð0 {
197 status = "okay";
198 ethernet0-port@0 {
199 phy-handle = <ðphy0>;
200 };
201};
202
203ð1 {
204 status = "okay";
205 ethernet1-port@0 {
206 phy-handle = <ðphy1>;
207 };
208};
209
210&pciec {
211 status = "okay";
212};
213
214&pcie0 {
215 status = "okay";
216};
1/dts-v1/;
2
3#include "kirkwood.dtsi"
4#include "kirkwood-6281.dtsi"
5
6/ {
7 model = "MPL CEC4";
8 compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
9
10 memory {
11 device_type = "memory";
12 reg = <0x00000000 0x20000000>;
13 };
14
15 chosen {
16 bootargs = "console=ttyS0,115200n8 earlyprintk";
17 stdout-path = &uart0;
18 };
19
20 mbus {
21 pcie-controller {
22 status = "okay";
23
24 pcie@1,0 {
25 status = "okay";
26 };
27 };
28 };
29
30 ocp@f1000000 {
31 pinctrl: pin-controller@10000 {
32 pmx_led_health: pmx-led-health {
33 marvell,pins = "mpp7";
34 marvell,function = "gpo";
35 };
36
37 pmx_sata1: pmx-sata1 {
38 marvell,pins = "mpp34";
39 marvell,function = "sata1";
40 };
41
42 pmx_sata0: pmx-sata0 {
43 marvell,pins = "mpp35";
44 marvell,function = "sata0";
45 };
46
47 pmx_led_user1o: pmx-led-user1o {
48 marvell,pins = "mpp40";
49 marvell,function = "gpio";
50 };
51
52 pmx_led_user1g: pmx-led-user1g {
53 marvell,pins = "mpp41";
54 marvell,function = "gpio";
55 };
56
57 pmx_led_user0o: pmx-led-user0o {
58 marvell,pins = "mpp44";
59 marvell,function = "gpio";
60 };
61
62 pmx_led_user0g: pmx-led-user0g {
63 marvell,pins = "mpp45";
64 marvell,function = "gpio";
65 };
66
67 pmx_led_misc: pmx-led-misc {
68 marvell,pins = "mpp46";
69 marvell,function = "gpio";
70 };
71
72 pmx_sdio_cd: pmx-sdio-cd {
73 marvell,pins = "mpp47";
74 marvell,function = "gpio";
75 };
76 };
77
78 i2c@11000 {
79 status = "okay";
80
81 rtc@51 {
82 compatible = "nxp,pcf8563";
83 reg = <0x51>;
84 };
85
86 eeprom@57 {
87 compatible = "atmel,24c02";
88 reg = <0x57>;
89 };
90
91 };
92
93 serial@12000 {
94 status = "okay";
95 };
96
97 rtc@10300 {
98 status = "disabled";
99 };
100
101 sata@80000 {
102 pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
103 pinctrl-names = "default";
104 nr-ports = <2>;
105 status = "okay";
106 };
107
108 mvsdio@90000 {
109 pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
110 pinctrl-names = "default";
111 status = "okay";
112 cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
113 /* No WP GPIO */
114 };
115 };
116
117 gpio-leds {
118 compatible = "gpio-leds";
119 pinctrl-0 = < &pmx_led_health
120 &pmx_led_user1o
121 &pmx_led_user1g &pmx_led_user0o
122 &pmx_led_user0g &pmx_led_misc
123 >;
124 pinctrl-names = "default";
125
126 health {
127 label = "status:green:health";
128 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
129 };
130
131 user1o {
132 label = "user1:orange";
133 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
134 default-state = "on";
135 };
136
137 user1g {
138 label = "user1:green";
139 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
140 default-state = "on";
141 };
142
143 user0o {
144 label = "user0:orange";
145 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
146 default-state = "on";
147 };
148
149 user0g {
150 label = "user0:green";
151 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
152 default-state = "on";
153 };
154
155 misc {
156 label = "status:orange:misc";
157 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
158 default-state = "on";
159 };
160
161 };
162};
163
164&nand {
165 status = "okay";
166
167 partition@0 {
168 label = "uboot";
169 reg = <0x0000000 0x100000>;
170 };
171
172 partition@100000 {
173 label = "env";
174 reg = <0x100000 0x80000>;
175 };
176
177 partition@180000 {
178 label = "fdt";
179 reg = <0x180000 0x80000>;
180 };
181
182 partition@200000 {
183 label = "kernel";
184 reg = <0x200000 0x400000>;
185 };
186
187 partition@600000 {
188 label = "rootfs";
189 reg = <0x600000 0x1fa00000>;
190 };
191};
192
193&mdio {
194 status = "okay";
195
196 ethphy0: ethernet-phy@1 {
197 reg = <1>;
198 };
199
200 ethphy1: ethernet-phy@2 {
201 reg = <2>;
202 };
203};
204
205ð0 {
206 status = "okay";
207 ethernet0-port@0 {
208 phy-handle = <ðphy0>;
209 };
210};
211
212ð1 {
213 status = "okay";
214 ethernet1-port@0 {
215 phy-handle = <ðphy1>;
216 };
217};