Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Crystalfontz America, Inc.
4 * Copyright 2013 Free Electrons
5 */
6
7/*
8 * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
9 * need to include the CFA-10036 DTS.
10 */
11#include "imx28-cfa10036.dts"
12
13/ {
14 model = "Crystalfontz CFA-10058 Board";
15 compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
16
17 apb@80000000 {
18 apbh@80000000 {
19 pinctrl@80018000 {
20 usb_pins_cfa10058: usb-10058@0 {
21 reg = <0>;
22 fsl,pinmux-ids = <
23 MX28_PAD_GPMI_D07__GPIO_0_7
24 >;
25 fsl,drive-strength = <MXS_DRIVE_4mA>;
26 fsl,voltage = <MXS_VOLTAGE_HIGH>;
27 fsl,pull-up = <MXS_PULL_DISABLE>;
28 };
29
30 lcdif_pins_cfa10058: lcdif-10058@0 {
31 reg = <0>;
32 fsl,pinmux-ids = <
33 MX28_PAD_LCD_RD_E__LCD_VSYNC
34 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
35 MX28_PAD_LCD_RS__LCD_DOTCLK
36 MX28_PAD_LCD_CS__LCD_ENABLE
37 >;
38 fsl,drive-strength = <MXS_DRIVE_4mA>;
39 fsl,voltage = <MXS_VOLTAGE_HIGH>;
40 fsl,pull-up = <MXS_PULL_DISABLE>;
41 };
42 };
43
44 lcdif@80030000 {
45 pinctrl-names = "default";
46 pinctrl-0 = <&lcdif_24bit_pins_a
47 &lcdif_pins_cfa10058>;
48 display = <&display0>;
49 status = "okay";
50
51 display0: display0 {
52 bits-per-pixel = <32>;
53 bus-width = <24>;
54
55 display-timings {
56 native-mode = <&timing0>;
57 timing0: timing0 {
58 clock-frequency = <30000000>;
59 hactive = <800>;
60 vactive = <480>;
61 hback-porch = <40>;
62 hfront-porch = <40>;
63 vback-porch = <13>;
64 vfront-porch = <29>;
65 hsync-len = <8>;
66 vsync-len = <8>;
67 hsync-active = <0>;
68 vsync-active = <0>;
69 de-active = <1>;
70 pixelclk-active = <1>;
71 };
72 };
73 };
74 };
75 };
76
77 apbx@80040000 {
78 lradc@80050000 {
79 fsl,lradc-touchscreen-wires = <4>;
80 status = "okay";
81 };
82
83 pwm: pwm@80064000 {
84 pinctrl-names = "default";
85 pinctrl-0 = <&pwm3_pins_b>;
86 status = "okay";
87 };
88
89 usbphy1: usbphy@8007e000 {
90 status = "okay";
91 };
92 };
93 };
94
95 ahb@80080000 {
96 usb1: usb@80090000 {
97 vbus-supply = <®_usb1_vbus>;
98 pinctrl-0 = <&usb1_pins_a>;
99 pinctrl-names = "default";
100 status = "okay";
101 };
102 };
103
104 regulators {
105 compatible = "simple-bus";
106 #address-cells = <1>;
107 #size-cells = <0>;
108
109 reg_usb1_vbus: regulator@0 {
110 pinctrl-names = "default";
111 pinctrl-0 = <&usb_pins_cfa10058>;
112 compatible = "regulator-fixed";
113 reg = <0>;
114 regulator-name = "usb1_vbus";
115 regulator-min-microvolt = <5000000>;
116 regulator-max-microvolt = <5000000>;
117 gpio = <&gpio0 7 1>;
118 };
119 };
120
121 ahb@80080000 {
122 mac0: ethernet@800f0000 {
123 phy-mode = "rmii";
124 pinctrl-names = "default";
125 pinctrl-0 = <&mac0_pins_a>;
126 phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
127 phy-reset-duration = <100>;
128 status = "okay";
129 };
130 };
131
132 backlight {
133 compatible = "pwm-backlight";
134 pwms = <&pwm 3 5000000>;
135 brightness-levels = <0 4 8 16 32 64 128 255>;
136 default-brightness-level = <6>;
137 };
138};
1/*
2 * Copyright 2013 Crystalfontz America, Inc.
3 * Copyright 2013 Free Electrons
4 *
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
8 *
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
11 */
12
13/*
14 * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
15 * need to include the CFA-10036 DTS.
16 */
17#include "imx28-cfa10036.dts"
18
19/ {
20 model = "Crystalfontz CFA-10058 Board";
21 compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
22
23 apb@80000000 {
24 apbh@80000000 {
25 pinctrl@80018000 {
26 usb_pins_cfa10058: usb-10058@0 {
27 reg = <0>;
28 fsl,pinmux-ids = <
29 MX28_PAD_GPMI_D07__GPIO_0_7
30 >;
31 fsl,drive-strength = <MXS_DRIVE_4mA>;
32 fsl,voltage = <MXS_VOLTAGE_HIGH>;
33 fsl,pull-up = <MXS_PULL_DISABLE>;
34 };
35
36 lcdif_pins_cfa10058: lcdif-10058@0 {
37 reg = <0>;
38 fsl,pinmux-ids = <
39 MX28_PAD_LCD_RD_E__LCD_VSYNC
40 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
41 MX28_PAD_LCD_RS__LCD_DOTCLK
42 MX28_PAD_LCD_CS__LCD_ENABLE
43 >;
44 fsl,drive-strength = <MXS_DRIVE_4mA>;
45 fsl,voltage = <MXS_VOLTAGE_HIGH>;
46 fsl,pull-up = <MXS_PULL_DISABLE>;
47 };
48 };
49
50 lcdif@80030000 {
51 pinctrl-names = "default";
52 pinctrl-0 = <&lcdif_24bit_pins_a
53 &lcdif_pins_cfa10058>;
54 display = <&display0>;
55 status = "okay";
56
57 display0: display0 {
58 bits-per-pixel = <32>;
59 bus-width = <24>;
60
61 display-timings {
62 native-mode = <&timing0>;
63 timing0: timing0 {
64 clock-frequency = <30000000>;
65 hactive = <800>;
66 vactive = <480>;
67 hback-porch = <40>;
68 hfront-porch = <40>;
69 vback-porch = <13>;
70 vfront-porch = <29>;
71 hsync-len = <8>;
72 vsync-len = <8>;
73 hsync-active = <0>;
74 vsync-active = <0>;
75 de-active = <1>;
76 pixelclk-active = <1>;
77 };
78 };
79 };
80 };
81 };
82
83 apbx@80040000 {
84 lradc@80050000 {
85 fsl,lradc-touchscreen-wires = <4>;
86 status = "okay";
87 };
88
89 pwm: pwm@80064000 {
90 pinctrl-names = "default";
91 pinctrl-0 = <&pwm3_pins_b>;
92 status = "okay";
93 };
94
95 usbphy1: usbphy@8007e000 {
96 status = "okay";
97 };
98 };
99 };
100
101 ahb@80080000 {
102 usb1: usb@80090000 {
103 vbus-supply = <®_usb1_vbus>;
104 pinctrl-0 = <&usb1_pins_a>;
105 pinctrl-names = "default";
106 status = "okay";
107 };
108 };
109
110 regulators {
111 compatible = "simple-bus";
112 #address-cells = <1>;
113 #size-cells = <0>;
114
115 reg_usb1_vbus: regulator@0 {
116 pinctrl-names = "default";
117 pinctrl-0 = <&usb_pins_cfa10058>;
118 compatible = "regulator-fixed";
119 reg = <0>;
120 regulator-name = "usb1_vbus";
121 regulator-min-microvolt = <5000000>;
122 regulator-max-microvolt = <5000000>;
123 gpio = <&gpio0 7 1>;
124 };
125 };
126
127 ahb@80080000 {
128 mac0: ethernet@800f0000 {
129 phy-mode = "rmii";
130 pinctrl-names = "default";
131 pinctrl-0 = <&mac0_pins_a>;
132 phy-reset-gpios = <&gpio2 21 0>;
133 phy-reset-duration = <100>;
134 status = "okay";
135 };
136 };
137
138 backlight {
139 compatible = "pwm-backlight";
140 pwms = <&pwm 3 5000000>;
141 brightness-levels = <0 4 8 16 32 64 128 255>;
142 default-brightness-level = <6>;
143 };
144};