1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
  4 *
  5 *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
  6 */
  7/dts-v1/;
  8#include "at91sam9260.dtsi"
  9
 10/ {
 11	model = "Olimex sam9-l9260";
 12	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
 13
 14	chosen {
 15		stdout-path = "serial0:115200n8";
 16	};
 17
 18	memory@20000000 {
 19		reg = <0x20000000 0x4000000>;
 20	};
 21
 22	clocks {
 23		slow_xtal {
 24			clock-frequency = <32768>;
 25		};
 26
 27		main_xtal {
 28			clock-frequency = <18432000>;
 29		};
 30	};
 31
 32	ahb {
 33		apb {
 34			tcb0: timer@fffa0000 {
 35				timer@0 {
 36					compatible = "atmel,tcb-timer";
 37					reg = <0>, <1>;
 38				};
 39
 40				timer@2 {
 41					compatible = "atmel,tcb-timer";
 42					reg = <2>;
 43				};
 44			};
 45
 46			mmc0: mmc@fffa8000 {
 47				pinctrl-0 = <
 48					&pinctrl_board_mmc0
 49					&pinctrl_mmc0_clk
 50					&pinctrl_mmc0_slot1_cmd_dat0
 51					&pinctrl_mmc0_slot1_dat1_3>;
 52				pinctrl-names = "default";
 53				status = "okay";
 54
 55				slot@1 {
 56					reg = <1>;
 57					bus-width = <4>;
 58					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
 59					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
 60				};
 61			};
 62
 63			macb0: ethernet@fffc4000 {
 64				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
 65				phy-mode = "mii";
 66				#address-cells = <1>;
 67				#size-cells = <0>;
 68				status = "okay";
 69
 70				ethernet-phy@1 {
 71					reg = <0x1>;
 72				};
 73			};
 74
 75			spi0: spi@fffc8000 {
 76				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
 77				status = "okay";
 78
 79				flash@0 {
 80					compatible = "atmel,at45", "atmel,dataflash";
 81					spi-max-frequency = <15000000>;
 82					reg = <0>;
 83				};
 84			};
 85
 86			dbgu: serial@fffff200 {
 87				status = "okay";
 88			};
 89
 90			pinctrl@fffff400 {
 91				mmc0 {
 92					pinctrl_board_mmc0: mmc0-board {
 93						atmel,pins =
 94							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
 95							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
 96					};
 97				};
 98			};
 99		};
100
101		nand0: nand@40000000 {
102			nand-bus-width = <8>;
103			nand-ecc-mode = "soft";
104			nand-on-flash-bbt;
105			status = "okay";
106		};
107
108		usb0: ohci@500000 {
109			status = "okay";
110		};
111
112	};
113
114	i2c-gpio-0 {
115		status = "okay";
116	};
117
118	leds {
119		compatible = "gpio-leds";
120
121		pwr_led {
122			label = "sam9-l9260:yellow:pwr";
123			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
124			linux,default-trigger = "cpu0";
125		};
126
127		status_led {
128			label = "sam9-l9260:green:status";
129			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
130			linux,default-trigger = "timer";
131		};
132	};
133};