Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/boot/bootp/init.S
4 *
5 * Copyright (C) 2000-2003 Russell King.
6 *
7 * "Header" file for splitting kernel + initrd. Note that we pass
8 * r0 through to r3 straight through.
9 *
10 * This demonstrates how to append code to the start of the kernel
11 * zImage, and boot the kernel without copying it around. This
12 * example would be simpler; if we didn't have an object of unknown
13 * size immediately following the kernel, we could build this into
14 * a binary blob, and concatenate the zImage using the cat command.
15 */
16 .section .start, "ax"
17 .type _start, #function
18 .globl _start
19
20_start: add lr, pc, #-0x8 @ lr = current load addr
21 adr r13, data
22 ldmia r13!, {r4-r6} @ r5 = dest, r6 = length
23 add r4, r4, lr @ r4 = initrd_start + load addr
24 bl move @ move the initrd
25
26/*
27 * Setup the initrd parameters to pass to the kernel. This can only be
28 * passed in via the tagged list.
29 */
30 ldmia r13, {r5-r9} @ get size and addr of initrd
31 @ r5 = ATAG_CORE
32 @ r6 = ATAG_INITRD2
33 @ r7 = initrd start
34 @ r8 = initrd end
35 @ r9 = param_struct address
36
37 ldr r10, [r9, #4] @ get first tag
38 teq r10, r5 @ is it ATAG_CORE?
39/*
40 * If we didn't find a valid tag list, create a dummy ATAG_CORE entry.
41 */
42 movne r10, #0 @ terminator
43 movne r4, #2 @ Size of this entry (2 words)
44 stmiane r9, {r4, r5, r10} @ Size, ATAG_CORE, terminator
45
46/*
47 * find the end of the tag list, and then add an INITRD tag on the end.
48 * If there is already an INITRD tag, then we ignore it; the last INITRD
49 * tag takes precedence.
50 */
51taglist: ldr r10, [r9, #0] @ tag length
52 teq r10, #0 @ last tag (zero length)?
53 addne r9, r9, r10, lsl #2
54 bne taglist
55
56 mov r5, #4 @ Size of initrd tag (4 words)
57 stmia r9, {r5, r6, r7, r8, r10}
58 b kernel_start @ call kernel
59
60/*
61 * Move the block of memory length r6 from address r4 to address r5
62 */
63move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
64 stmia r5!, {r7 - r10}
65 ldmia r4!, {r7 - r10}
66 stmia r5!, {r7 - r10}
67 subs r6, r6, #8 * 4
68 bcs move
69 mov pc, lr
70
71 .size _start, . - _start
72
73 .align
74
75 .type data,#object
76data: .word initrd_start @ source initrd address
77 .word initrd_phys @ destination initrd address
78 .word initrd_size @ initrd size
79
80 .word 0x54410001 @ r5 = ATAG_CORE
81 .word 0x54420005 @ r6 = ATAG_INITRD2
82 .word initrd_phys @ r7
83 .word initrd_size @ r8
84 .word params_phys @ r9
85 .size data, . - data
1/*
2 * linux/arch/arm/boot/bootp/init.S
3 *
4 * Copyright (C) 2000-2003 Russell King.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * "Header" file for splitting kernel + initrd. Note that we pass
11 * r0 through to r3 straight through.
12 *
13 * This demonstrates how to append code to the start of the kernel
14 * zImage, and boot the kernel without copying it around. This
15 * example would be simpler; if we didn't have an object of unknown
16 * size immediately following the kernel, we could build this into
17 * a binary blob, and concatenate the zImage using the cat command.
18 */
19 .section .start,#alloc,#execinstr
20 .type _start, #function
21 .globl _start
22
23_start: add lr, pc, #-0x8 @ lr = current load addr
24 adr r13, data
25 ldmia r13!, {r4-r6} @ r5 = dest, r6 = length
26 add r4, r4, lr @ r4 = initrd_start + load addr
27 bl move @ move the initrd
28
29/*
30 * Setup the initrd parameters to pass to the kernel. This can only be
31 * passed in via the tagged list.
32 */
33 ldmia r13, {r5-r9} @ get size and addr of initrd
34 @ r5 = ATAG_CORE
35 @ r6 = ATAG_INITRD2
36 @ r7 = initrd start
37 @ r8 = initrd end
38 @ r9 = param_struct address
39
40 ldr r10, [r9, #4] @ get first tag
41 teq r10, r5 @ is it ATAG_CORE?
42/*
43 * If we didn't find a valid tag list, create a dummy ATAG_CORE entry.
44 */
45 movne r10, #0 @ terminator
46 movne r4, #2 @ Size of this entry (2 words)
47 stmneia r9, {r4, r5, r10} @ Size, ATAG_CORE, terminator
48
49/*
50 * find the end of the tag list, and then add an INITRD tag on the end.
51 * If there is already an INITRD tag, then we ignore it; the last INITRD
52 * tag takes precedence.
53 */
54taglist: ldr r10, [r9, #0] @ tag length
55 teq r10, #0 @ last tag (zero length)?
56 addne r9, r9, r10, lsl #2
57 bne taglist
58
59 mov r5, #4 @ Size of initrd tag (4 words)
60 stmia r9, {r5, r6, r7, r8, r10}
61 b kernel_start @ call kernel
62
63/*
64 * Move the block of memory length r6 from address r4 to address r5
65 */
66move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
67 stmia r5!, {r7 - r10}
68 ldmia r4!, {r7 - r10}
69 stmia r5!, {r7 - r10}
70 subs r6, r6, #8 * 4
71 bcs move
72 mov pc, lr
73
74 .size _start, . - _start
75
76 .align
77
78 .type data,#object
79data: .word initrd_start @ source initrd address
80 .word initrd_phys @ destination initrd address
81 .word initrd_size @ initrd size
82
83 .word 0x54410001 @ r5 = ATAG_CORE
84 .word 0x54420005 @ r6 = ATAG_INITRD2
85 .word initrd_phys @ r7
86 .word initrd_size @ r8
87 .word params_phys @ r9
88 .size data, . - data