Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * AHCI SATA platform library
4 *
5 * Copyright 2004-2005 Red Hat, Inc.
6 * Jeff Garzik <jgarzik@pobox.com>
7 * Copyright 2010 MontaVista Software, LLC.
8 * Anton Vorontsov <avorontsov@ru.mvista.com>
9 */
10
11#include <linux/clk.h>
12#include <linux/kernel.h>
13#include <linux/gfp.h>
14#include <linux/module.h>
15#include <linux/pm.h>
16#include <linux/interrupt.h>
17#include <linux/device.h>
18#include <linux/platform_device.h>
19#include <linux/libata.h>
20#include <linux/ahci_platform.h>
21#include <linux/phy/phy.h>
22#include <linux/pm_runtime.h>
23#include <linux/of_platform.h>
24#include <linux/reset.h>
25#include "ahci.h"
26
27static void ahci_host_stop(struct ata_host *host);
28
29struct ata_port_operations ahci_platform_ops = {
30 .inherits = &ahci_ops,
31 .host_stop = ahci_host_stop,
32};
33EXPORT_SYMBOL_GPL(ahci_platform_ops);
34
35/**
36 * ahci_platform_enable_phys - Enable PHYs
37 * @hpriv: host private area to store config values
38 *
39 * This function enables all the PHYs found in hpriv->phys, if any.
40 * If a PHY fails to be enabled, it disables all the PHYs already
41 * enabled in reverse order and returns an error.
42 *
43 * RETURNS:
44 * 0 on success otherwise a negative error code
45 */
46int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
47{
48 int rc, i;
49
50 for (i = 0; i < hpriv->nports; i++) {
51 rc = phy_init(hpriv->phys[i]);
52 if (rc)
53 goto disable_phys;
54
55 rc = phy_set_mode(hpriv->phys[i], PHY_MODE_SATA);
56 if (rc) {
57 phy_exit(hpriv->phys[i]);
58 goto disable_phys;
59 }
60
61 rc = phy_power_on(hpriv->phys[i]);
62 if (rc) {
63 phy_exit(hpriv->phys[i]);
64 goto disable_phys;
65 }
66 }
67
68 return 0;
69
70disable_phys:
71 while (--i >= 0) {
72 phy_power_off(hpriv->phys[i]);
73 phy_exit(hpriv->phys[i]);
74 }
75 return rc;
76}
77EXPORT_SYMBOL_GPL(ahci_platform_enable_phys);
78
79/**
80 * ahci_platform_disable_phys - Disable PHYs
81 * @hpriv: host private area to store config values
82 *
83 * This function disables all PHYs found in hpriv->phys.
84 */
85void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
86{
87 int i;
88
89 for (i = 0; i < hpriv->nports; i++) {
90 phy_power_off(hpriv->phys[i]);
91 phy_exit(hpriv->phys[i]);
92 }
93}
94EXPORT_SYMBOL_GPL(ahci_platform_disable_phys);
95
96/**
97 * ahci_platform_find_clk - Find platform clock
98 * @hpriv: host private area to store config values
99 * @con_id: clock connection ID
100 *
101 * This function returns a pointer to the clock descriptor of the clock with
102 * the passed ID.
103 *
104 * RETURNS:
105 * Pointer to the clock descriptor on success otherwise NULL
106 */
107struct clk *ahci_platform_find_clk(struct ahci_host_priv *hpriv, const char *con_id)
108{
109 int i;
110
111 for (i = 0; i < hpriv->n_clks; i++) {
112 if (hpriv->clks[i].id && !strcmp(hpriv->clks[i].id, con_id))
113 return hpriv->clks[i].clk;
114 }
115
116 return NULL;
117}
118EXPORT_SYMBOL_GPL(ahci_platform_find_clk);
119
120/**
121 * ahci_platform_enable_clks - Enable platform clocks
122 * @hpriv: host private area to store config values
123 *
124 * This function enables all the clks found for the AHCI device.
125 *
126 * RETURNS:
127 * 0 on success otherwise a negative error code
128 */
129int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
130{
131 return clk_bulk_prepare_enable(hpriv->n_clks, hpriv->clks);
132}
133EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
134
135/**
136 * ahci_platform_disable_clks - Disable platform clocks
137 * @hpriv: host private area to store config values
138 *
139 * This function disables all the clocks enabled before
140 * (bulk-clocks-disable function is supposed to do that in reverse
141 * from the enabling procedure order).
142 */
143void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
144{
145 clk_bulk_disable_unprepare(hpriv->n_clks, hpriv->clks);
146}
147EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
148
149/**
150 * ahci_platform_deassert_rsts - Deassert/trigger platform resets
151 * @hpriv: host private area to store config values
152 *
153 * This function deasserts or triggers all the reset lines found for
154 * the AHCI device.
155 *
156 * RETURNS:
157 * 0 on success otherwise a negative error code
158 */
159int ahci_platform_deassert_rsts(struct ahci_host_priv *hpriv)
160{
161 if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER)
162 return reset_control_reset(hpriv->rsts);
163
164 return reset_control_deassert(hpriv->rsts);
165}
166EXPORT_SYMBOL_GPL(ahci_platform_deassert_rsts);
167
168/**
169 * ahci_platform_assert_rsts - Assert/rearm platform resets
170 * @hpriv: host private area to store config values
171 *
172 * This function asserts or rearms (for self-deasserting resets) all
173 * the reset controls found for the AHCI device.
174 *
175 * RETURNS:
176 * 0 on success otherwise a negative error code
177 */
178int ahci_platform_assert_rsts(struct ahci_host_priv *hpriv)
179{
180 if (hpriv->f_rsts & AHCI_PLATFORM_RST_TRIGGER)
181 return reset_control_rearm(hpriv->rsts);
182
183 return reset_control_assert(hpriv->rsts);
184}
185EXPORT_SYMBOL_GPL(ahci_platform_assert_rsts);
186
187/**
188 * ahci_platform_enable_regulators - Enable regulators
189 * @hpriv: host private area to store config values
190 *
191 * This function enables all the regulators found in controller and
192 * hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
193 * disables all the regulators already enabled in reverse order and
194 * returns an error.
195 *
196 * RETURNS:
197 * 0 on success otherwise a negative error code
198 */
199int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
200{
201 int rc, i;
202
203 rc = regulator_enable(hpriv->ahci_regulator);
204 if (rc)
205 return rc;
206
207 rc = regulator_enable(hpriv->phy_regulator);
208 if (rc)
209 goto disable_ahci_pwrs;
210
211 for (i = 0; i < hpriv->nports; i++) {
212 if (!hpriv->target_pwrs[i])
213 continue;
214
215 rc = regulator_enable(hpriv->target_pwrs[i]);
216 if (rc)
217 goto disable_target_pwrs;
218 }
219
220 return 0;
221
222disable_target_pwrs:
223 while (--i >= 0)
224 if (hpriv->target_pwrs[i])
225 regulator_disable(hpriv->target_pwrs[i]);
226
227 regulator_disable(hpriv->phy_regulator);
228disable_ahci_pwrs:
229 regulator_disable(hpriv->ahci_regulator);
230 return rc;
231}
232EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
233
234/**
235 * ahci_platform_disable_regulators - Disable regulators
236 * @hpriv: host private area to store config values
237 *
238 * This function disables all regulators found in hpriv->target_pwrs and
239 * AHCI controller.
240 */
241void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
242{
243 int i;
244
245 for (i = 0; i < hpriv->nports; i++) {
246 if (!hpriv->target_pwrs[i])
247 continue;
248 regulator_disable(hpriv->target_pwrs[i]);
249 }
250
251 regulator_disable(hpriv->ahci_regulator);
252 regulator_disable(hpriv->phy_regulator);
253}
254EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
255/**
256 * ahci_platform_enable_resources - Enable platform resources
257 * @hpriv: host private area to store config values
258 *
259 * This function enables all ahci_platform managed resources in the
260 * following order:
261 * 1) Regulator
262 * 2) Clocks (through ahci_platform_enable_clks)
263 * 3) Resets
264 * 4) Phys
265 *
266 * If resource enabling fails at any point the previous enabled resources
267 * are disabled in reverse order.
268 *
269 * RETURNS:
270 * 0 on success otherwise a negative error code
271 */
272int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
273{
274 int rc;
275
276 rc = ahci_platform_enable_regulators(hpriv);
277 if (rc)
278 return rc;
279
280 rc = ahci_platform_enable_clks(hpriv);
281 if (rc)
282 goto disable_regulator;
283
284 rc = ahci_platform_deassert_rsts(hpriv);
285 if (rc)
286 goto disable_clks;
287
288 rc = ahci_platform_enable_phys(hpriv);
289 if (rc)
290 goto disable_rsts;
291
292 return 0;
293
294disable_rsts:
295 ahci_platform_assert_rsts(hpriv);
296
297disable_clks:
298 ahci_platform_disable_clks(hpriv);
299
300disable_regulator:
301 ahci_platform_disable_regulators(hpriv);
302
303 return rc;
304}
305EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
306
307/**
308 * ahci_platform_disable_resources - Disable platform resources
309 * @hpriv: host private area to store config values
310 *
311 * This function disables all ahci_platform managed resources in the
312 * following order:
313 * 1) Phys
314 * 2) Resets
315 * 3) Clocks (through ahci_platform_disable_clks)
316 * 4) Regulator
317 */
318void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
319{
320 ahci_platform_disable_phys(hpriv);
321
322 ahci_platform_assert_rsts(hpriv);
323
324 ahci_platform_disable_clks(hpriv);
325
326 ahci_platform_disable_regulators(hpriv);
327}
328EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
329
330static void ahci_platform_put_resources(struct device *dev, void *res)
331{
332 struct ahci_host_priv *hpriv = res;
333 int c;
334
335 if (hpriv->got_runtime_pm) {
336 pm_runtime_put_sync(dev);
337 pm_runtime_disable(dev);
338 }
339
340 /*
341 * The regulators are tied to child node device and not to the
342 * SATA device itself. So we can't use devm for automatically
343 * releasing them. We have to do it manually here.
344 */
345 for (c = 0; c < hpriv->nports; c++)
346 if (hpriv->target_pwrs && hpriv->target_pwrs[c])
347 regulator_put(hpriv->target_pwrs[c]);
348
349 kfree(hpriv->target_pwrs);
350}
351
352static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
353 struct device *dev, struct device_node *node)
354{
355 int rc;
356
357 hpriv->phys[port] = devm_of_phy_get(dev, node, NULL);
358
359 if (!IS_ERR(hpriv->phys[port]))
360 return 0;
361
362 rc = PTR_ERR(hpriv->phys[port]);
363 switch (rc) {
364 case -ENOSYS:
365 /* No PHY support. Check if PHY is required. */
366 if (of_find_property(node, "phys", NULL)) {
367 dev_err(dev,
368 "couldn't get PHY in node %pOFn: ENOSYS\n",
369 node);
370 break;
371 }
372 fallthrough;
373 case -ENODEV:
374 /* continue normally */
375 hpriv->phys[port] = NULL;
376 rc = 0;
377 break;
378 case -EPROBE_DEFER:
379 /* Do not complain yet */
380 break;
381
382 default:
383 dev_err(dev,
384 "couldn't get PHY in node %pOFn: %d\n",
385 node, rc);
386
387 break;
388 }
389
390 return rc;
391}
392
393static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
394 struct device *dev)
395{
396 struct regulator *target_pwr;
397 int rc = 0;
398
399 target_pwr = regulator_get(dev, "target");
400
401 if (!IS_ERR(target_pwr))
402 hpriv->target_pwrs[port] = target_pwr;
403 else
404 rc = PTR_ERR(target_pwr);
405
406 return rc;
407}
408
409static int ahci_platform_get_firmware(struct ahci_host_priv *hpriv,
410 struct device *dev)
411{
412 struct device_node *child;
413 u32 port;
414
415 if (!of_property_read_u32(dev->of_node, "hba-cap", &hpriv->saved_cap))
416 hpriv->saved_cap &= (HOST_CAP_SSS | HOST_CAP_MPS);
417
418 of_property_read_u32(dev->of_node,
419 "ports-implemented", &hpriv->saved_port_map);
420
421 for_each_child_of_node(dev->of_node, child) {
422 if (!of_device_is_available(child))
423 continue;
424
425 if (of_property_read_u32(child, "reg", &port)) {
426 of_node_put(child);
427 return -EINVAL;
428 }
429
430 if (!of_property_read_u32(child, "hba-port-cap", &hpriv->saved_port_cap[port]))
431 hpriv->saved_port_cap[port] &= PORT_CMD_CAP;
432 }
433
434 return 0;
435}
436
437/**
438 * ahci_platform_get_resources - Get platform resources
439 * @pdev: platform device to get resources for
440 * @flags: bitmap representing the resource to get
441 *
442 * This function allocates an ahci_host_priv struct, and gets the following
443 * resources, storing a reference to them inside the returned struct:
444 *
445 * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
446 * 2) regulator for controlling the targets power (optional)
447 * regulator for controlling the AHCI controller (optional)
448 * 3) all clocks specified in the devicetree node, or a single
449 * clock for non-OF platforms (optional)
450 * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
451 * 5) phys (optional)
452 *
453 * RETURNS:
454 * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
455 */
456struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
457 unsigned int flags)
458{
459 int child_nodes, rc = -ENOMEM, enabled_ports = 0;
460 struct device *dev = &pdev->dev;
461 struct ahci_host_priv *hpriv;
462 struct device_node *child;
463 u32 mask_port_map = 0;
464
465 if (!devres_open_group(dev, NULL, GFP_KERNEL))
466 return ERR_PTR(-ENOMEM);
467
468 hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
469 GFP_KERNEL);
470 if (!hpriv)
471 goto err_out;
472
473 devres_add(dev, hpriv);
474
475 /*
476 * If the DT provided an "ahci" named resource, use it. Otherwise,
477 * fallback to using the default first resource for the device node.
478 */
479 if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"))
480 hpriv->mmio = devm_platform_ioremap_resource_byname(pdev, "ahci");
481 else
482 hpriv->mmio = devm_platform_ioremap_resource(pdev, 0);
483 if (IS_ERR(hpriv->mmio)) {
484 rc = PTR_ERR(hpriv->mmio);
485 goto err_out;
486 }
487
488 /*
489 * Bulk clocks getting procedure can fail to find any clock due to
490 * running on a non-OF platform or due to the clocks being defined in
491 * bypass of the DT firmware (like da850, spear13xx). In that case we
492 * fallback to getting a single clock source right from the dev clocks
493 * list.
494 */
495 rc = devm_clk_bulk_get_all(dev, &hpriv->clks);
496 if (rc < 0)
497 goto err_out;
498
499 if (rc > 0) {
500 /* Got clocks in bulk */
501 hpriv->n_clks = rc;
502 } else {
503 /*
504 * No clock bulk found: fallback to manually getting
505 * the optional clock.
506 */
507 hpriv->clks = devm_kzalloc(dev, sizeof(*hpriv->clks), GFP_KERNEL);
508 if (!hpriv->clks) {
509 rc = -ENOMEM;
510 goto err_out;
511 }
512 hpriv->clks->clk = devm_clk_get_optional(dev, NULL);
513 if (IS_ERR(hpriv->clks->clk)) {
514 rc = PTR_ERR(hpriv->clks->clk);
515 goto err_out;
516 } else if (hpriv->clks->clk) {
517 hpriv->clks->id = "ahci";
518 hpriv->n_clks = 1;
519 }
520 }
521
522 hpriv->ahci_regulator = devm_regulator_get(dev, "ahci");
523 if (IS_ERR(hpriv->ahci_regulator)) {
524 rc = PTR_ERR(hpriv->ahci_regulator);
525 if (rc != 0)
526 goto err_out;
527 }
528
529 hpriv->phy_regulator = devm_regulator_get(dev, "phy");
530 if (IS_ERR(hpriv->phy_regulator)) {
531 rc = PTR_ERR(hpriv->phy_regulator);
532 goto err_out;
533 }
534
535 if (flags & AHCI_PLATFORM_GET_RESETS) {
536 hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
537 if (IS_ERR(hpriv->rsts)) {
538 rc = PTR_ERR(hpriv->rsts);
539 goto err_out;
540 }
541
542 hpriv->f_rsts = flags & AHCI_PLATFORM_RST_TRIGGER;
543 }
544
545 /*
546 * Too many sub-nodes most likely means having something wrong with
547 * the firmware.
548 */
549 child_nodes = of_get_child_count(dev->of_node);
550 if (child_nodes > AHCI_MAX_PORTS) {
551 rc = -EINVAL;
552 goto err_out;
553 }
554
555 /*
556 * If no sub-node was found, we still need to set nports to
557 * one in order to be able to use the
558 * ahci_platform_[en|dis]able_[phys|regulators] functions.
559 */
560 if (child_nodes)
561 hpriv->nports = child_nodes;
562 else
563 hpriv->nports = 1;
564
565 hpriv->phys = devm_kcalloc(dev, hpriv->nports, sizeof(*hpriv->phys), GFP_KERNEL);
566 if (!hpriv->phys) {
567 rc = -ENOMEM;
568 goto err_out;
569 }
570 /*
571 * We cannot use devm_ here, since ahci_platform_put_resources() uses
572 * target_pwrs after devm_ have freed memory
573 */
574 hpriv->target_pwrs = kcalloc(hpriv->nports, sizeof(*hpriv->target_pwrs), GFP_KERNEL);
575 if (!hpriv->target_pwrs) {
576 rc = -ENOMEM;
577 goto err_out;
578 }
579
580 if (child_nodes) {
581 for_each_child_of_node(dev->of_node, child) {
582 u32 port;
583 struct platform_device *port_dev __maybe_unused;
584
585 if (!of_device_is_available(child))
586 continue;
587
588 if (of_property_read_u32(child, "reg", &port)) {
589 rc = -EINVAL;
590 of_node_put(child);
591 goto err_out;
592 }
593
594 if (port >= hpriv->nports) {
595 dev_warn(dev, "invalid port number %d\n", port);
596 continue;
597 }
598 mask_port_map |= BIT(port);
599
600#ifdef CONFIG_OF_ADDRESS
601 of_platform_device_create(child, NULL, NULL);
602
603 port_dev = of_find_device_by_node(child);
604
605 if (port_dev) {
606 rc = ahci_platform_get_regulator(hpriv, port,
607 &port_dev->dev);
608 if (rc == -EPROBE_DEFER) {
609 of_node_put(child);
610 goto err_out;
611 }
612 }
613#endif
614
615 rc = ahci_platform_get_phy(hpriv, port, dev, child);
616 if (rc) {
617 of_node_put(child);
618 goto err_out;
619 }
620
621 enabled_ports++;
622 }
623 if (!enabled_ports) {
624 dev_warn(dev, "No port enabled\n");
625 rc = -ENODEV;
626 goto err_out;
627 }
628
629 if (!hpriv->mask_port_map)
630 hpriv->mask_port_map = mask_port_map;
631 } else {
632 /*
633 * If no sub-node was found, keep this for device tree
634 * compatibility
635 */
636 rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node);
637 if (rc)
638 goto err_out;
639
640 rc = ahci_platform_get_regulator(hpriv, 0, dev);
641 if (rc == -EPROBE_DEFER)
642 goto err_out;
643 }
644
645 /*
646 * Retrieve firmware-specific flags which then will be used to set
647 * the HW-init fields of HBA and its ports
648 */
649 rc = ahci_platform_get_firmware(hpriv, dev);
650 if (rc)
651 goto err_out;
652
653 pm_runtime_enable(dev);
654 pm_runtime_get_sync(dev);
655 hpriv->got_runtime_pm = true;
656
657 devres_remove_group(dev, NULL);
658 return hpriv;
659
660err_out:
661 devres_release_group(dev, NULL);
662 return ERR_PTR(rc);
663}
664EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
665
666/**
667 * ahci_platform_init_host - Bring up an ahci-platform host
668 * @pdev: platform device pointer for the host
669 * @hpriv: ahci-host private data for the host
670 * @pi_template: template for the ata_port_info to use
671 * @sht: scsi_host_template to use when registering
672 *
673 * This function does all the usual steps needed to bring up an
674 * ahci-platform host, note any necessary resources (ie clks, phys, etc.)
675 * must be initialized / enabled before calling this.
676 *
677 * RETURNS:
678 * 0 on success otherwise a negative error code
679 */
680int ahci_platform_init_host(struct platform_device *pdev,
681 struct ahci_host_priv *hpriv,
682 const struct ata_port_info *pi_template,
683 struct scsi_host_template *sht)
684{
685 struct device *dev = &pdev->dev;
686 struct ata_port_info pi = *pi_template;
687 const struct ata_port_info *ppi[] = { &pi, NULL };
688 struct ata_host *host;
689 int i, irq, n_ports, rc;
690
691 irq = platform_get_irq(pdev, 0);
692 if (irq < 0)
693 return irq;
694 if (!irq)
695 return -EINVAL;
696
697 hpriv->irq = irq;
698
699 /* prepare host */
700 pi.private_data = (void *)(unsigned long)hpriv->flags;
701
702 ahci_save_initial_config(dev, hpriv);
703
704 if (hpriv->cap & HOST_CAP_NCQ)
705 pi.flags |= ATA_FLAG_NCQ;
706
707 if (hpriv->cap & HOST_CAP_PMP)
708 pi.flags |= ATA_FLAG_PMP;
709
710 ahci_set_em_messages(hpriv, &pi);
711
712 /* CAP.NP sometimes indicate the index of the last enabled
713 * port, at other times, that of the last possible port, so
714 * determining the maximum port number requires looking at
715 * both CAP.NP and port_map.
716 */
717 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
718
719 host = ata_host_alloc_pinfo(dev, ppi, n_ports);
720 if (!host)
721 return -ENOMEM;
722
723 host->private_data = hpriv;
724
725 if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
726 host->flags |= ATA_HOST_PARALLEL_SCAN;
727 else
728 dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
729
730 if (pi.flags & ATA_FLAG_EM)
731 ahci_reset_em(host);
732
733 for (i = 0; i < host->n_ports; i++) {
734 struct ata_port *ap = host->ports[i];
735
736 ata_port_desc(ap, "mmio %pR",
737 platform_get_resource(pdev, IORESOURCE_MEM, 0));
738 ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
739
740 /* set enclosure management message type */
741 if (ap->flags & ATA_FLAG_EM)
742 ap->em_message_type = hpriv->em_msg_type;
743
744 /* disabled/not-implemented port */
745 if (!(hpriv->port_map & (1 << i)))
746 ap->ops = &ata_dummy_port_ops;
747 }
748
749 if (hpriv->cap & HOST_CAP_64) {
750 rc = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
751 if (rc) {
752 dev_err(dev, "Failed to enable 64-bit DMA.\n");
753 return rc;
754 }
755 }
756
757 rc = ahci_reset_controller(host);
758 if (rc)
759 return rc;
760
761 ahci_init_controller(host);
762 ahci_print_info(host, "platform");
763
764 return ahci_host_activate(host, sht);
765}
766EXPORT_SYMBOL_GPL(ahci_platform_init_host);
767
768static void ahci_host_stop(struct ata_host *host)
769{
770 struct ahci_host_priv *hpriv = host->private_data;
771
772 ahci_platform_disable_resources(hpriv);
773}
774
775/**
776 * ahci_platform_shutdown - Disable interrupts and stop DMA for host ports
777 * @pdev: platform device pointer for the host
778 *
779 * This function is called during system shutdown and performs the minimal
780 * deconfiguration required to ensure that an ahci_platform host cannot
781 * corrupt or otherwise interfere with a new kernel being started with kexec.
782 */
783void ahci_platform_shutdown(struct platform_device *pdev)
784{
785 struct ata_host *host = platform_get_drvdata(pdev);
786 struct ahci_host_priv *hpriv = host->private_data;
787 void __iomem *mmio = hpriv->mmio;
788 int i;
789
790 for (i = 0; i < host->n_ports; i++) {
791 struct ata_port *ap = host->ports[i];
792
793 /* Disable port interrupts */
794 if (ap->ops->freeze)
795 ap->ops->freeze(ap);
796
797 /* Stop the port DMA engines */
798 if (ap->ops->port_stop)
799 ap->ops->port_stop(ap);
800 }
801
802 /* Disable and clear host interrupts */
803 writel(readl(mmio + HOST_CTL) & ~HOST_IRQ_EN, mmio + HOST_CTL);
804 readl(mmio + HOST_CTL); /* flush */
805 writel(GENMASK(host->n_ports, 0), mmio + HOST_IRQ_STAT);
806}
807EXPORT_SYMBOL_GPL(ahci_platform_shutdown);
808
809#ifdef CONFIG_PM_SLEEP
810/**
811 * ahci_platform_suspend_host - Suspend an ahci-platform host
812 * @dev: device pointer for the host
813 *
814 * This function does all the usual steps needed to suspend an
815 * ahci-platform host, note any necessary resources (ie clks, phys, etc.)
816 * must be disabled after calling this.
817 *
818 * RETURNS:
819 * 0 on success otherwise a negative error code
820 */
821int ahci_platform_suspend_host(struct device *dev)
822{
823 struct ata_host *host = dev_get_drvdata(dev);
824 struct ahci_host_priv *hpriv = host->private_data;
825 void __iomem *mmio = hpriv->mmio;
826 u32 ctl;
827
828 if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
829 dev_err(dev, "firmware update required for suspend/resume\n");
830 return -EIO;
831 }
832
833 /*
834 * AHCI spec rev1.1 section 8.3.3:
835 * Software must disable interrupts prior to requesting a
836 * transition of the HBA to D3 state.
837 */
838 ctl = readl(mmio + HOST_CTL);
839 ctl &= ~HOST_IRQ_EN;
840 writel(ctl, mmio + HOST_CTL);
841 readl(mmio + HOST_CTL); /* flush */
842
843 if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
844 ahci_platform_disable_phys(hpriv);
845
846 ata_host_suspend(host, PMSG_SUSPEND);
847 return 0;
848}
849EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
850
851/**
852 * ahci_platform_resume_host - Resume an ahci-platform host
853 * @dev: device pointer for the host
854 *
855 * This function does all the usual steps needed to resume an ahci-platform
856 * host, note any necessary resources (ie clks, phys, etc.) must be
857 * initialized / enabled before calling this.
858 *
859 * RETURNS:
860 * 0 on success otherwise a negative error code
861 */
862int ahci_platform_resume_host(struct device *dev)
863{
864 struct ata_host *host = dev_get_drvdata(dev);
865 struct ahci_host_priv *hpriv = host->private_data;
866 int rc;
867
868 if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
869 rc = ahci_reset_controller(host);
870 if (rc)
871 return rc;
872
873 ahci_init_controller(host);
874 }
875
876 if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS)
877 ahci_platform_enable_phys(hpriv);
878
879 ata_host_resume(host);
880
881 return 0;
882}
883EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
884
885/**
886 * ahci_platform_suspend - Suspend an ahci-platform device
887 * @dev: the platform device to suspend
888 *
889 * This function suspends the host associated with the device, followed by
890 * disabling all the resources of the device.
891 *
892 * RETURNS:
893 * 0 on success otherwise a negative error code
894 */
895int ahci_platform_suspend(struct device *dev)
896{
897 struct ata_host *host = dev_get_drvdata(dev);
898 struct ahci_host_priv *hpriv = host->private_data;
899 int rc;
900
901 rc = ahci_platform_suspend_host(dev);
902 if (rc)
903 return rc;
904
905 ahci_platform_disable_resources(hpriv);
906
907 return 0;
908}
909EXPORT_SYMBOL_GPL(ahci_platform_suspend);
910
911/**
912 * ahci_platform_resume - Resume an ahci-platform device
913 * @dev: the platform device to resume
914 *
915 * This function enables all the resources of the device followed by
916 * resuming the host associated with the device.
917 *
918 * RETURNS:
919 * 0 on success otherwise a negative error code
920 */
921int ahci_platform_resume(struct device *dev)
922{
923 struct ata_host *host = dev_get_drvdata(dev);
924 struct ahci_host_priv *hpriv = host->private_data;
925 int rc;
926
927 rc = ahci_platform_enable_resources(hpriv);
928 if (rc)
929 return rc;
930
931 rc = ahci_platform_resume_host(dev);
932 if (rc)
933 goto disable_resources;
934
935 /* We resumed so update PM runtime state */
936 pm_runtime_disable(dev);
937 pm_runtime_set_active(dev);
938 pm_runtime_enable(dev);
939
940 return 0;
941
942disable_resources:
943 ahci_platform_disable_resources(hpriv);
944
945 return rc;
946}
947EXPORT_SYMBOL_GPL(ahci_platform_resume);
948#endif
949
950MODULE_DESCRIPTION("AHCI SATA platform library");
951MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
952MODULE_LICENSE("GPL");
1/*
2 * AHCI SATA platform library
3 *
4 * Copyright 2004-2005 Red Hat, Inc.
5 * Jeff Garzik <jgarzik@pobox.com>
6 * Copyright 2010 MontaVista Software, LLC.
7 * Anton Vorontsov <avorontsov@ru.mvista.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2, or (at your option)
12 * any later version.
13 */
14
15#include <linux/clk.h>
16#include <linux/kernel.h>
17#include <linux/gfp.h>
18#include <linux/module.h>
19#include <linux/pm.h>
20#include <linux/interrupt.h>
21#include <linux/device.h>
22#include <linux/platform_device.h>
23#include <linux/libata.h>
24#include <linux/ahci_platform.h>
25#include <linux/phy/phy.h>
26#include <linux/pm_runtime.h>
27#include <linux/of_platform.h>
28#include "ahci.h"
29
30static void ahci_host_stop(struct ata_host *host);
31
32struct ata_port_operations ahci_platform_ops = {
33 .inherits = &ahci_ops,
34 .host_stop = ahci_host_stop,
35};
36EXPORT_SYMBOL_GPL(ahci_platform_ops);
37
38/**
39 * ahci_platform_enable_phys - Enable PHYs
40 * @hpriv: host private area to store config values
41 *
42 * This function enables all the PHYs found in hpriv->phys, if any.
43 * If a PHY fails to be enabled, it disables all the PHYs already
44 * enabled in reverse order and returns an error.
45 *
46 * RETURNS:
47 * 0 on success otherwise a negative error code
48 */
49static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
50{
51 int rc, i;
52
53 for (i = 0; i < hpriv->nports; i++) {
54 rc = phy_init(hpriv->phys[i]);
55 if (rc)
56 goto disable_phys;
57
58 rc = phy_power_on(hpriv->phys[i]);
59 if (rc) {
60 phy_exit(hpriv->phys[i]);
61 goto disable_phys;
62 }
63 }
64
65 return 0;
66
67disable_phys:
68 while (--i >= 0) {
69 phy_power_off(hpriv->phys[i]);
70 phy_exit(hpriv->phys[i]);
71 }
72 return rc;
73}
74
75/**
76 * ahci_platform_disable_phys - Disable PHYs
77 * @hpriv: host private area to store config values
78 *
79 * This function disables all PHYs found in hpriv->phys.
80 */
81static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
82{
83 int i;
84
85 for (i = 0; i < hpriv->nports; i++) {
86 phy_power_off(hpriv->phys[i]);
87 phy_exit(hpriv->phys[i]);
88 }
89}
90
91/**
92 * ahci_platform_enable_clks - Enable platform clocks
93 * @hpriv: host private area to store config values
94 *
95 * This function enables all the clks found in hpriv->clks, starting at
96 * index 0. If any clk fails to enable it disables all the clks already
97 * enabled in reverse order, and then returns an error.
98 *
99 * RETURNS:
100 * 0 on success otherwise a negative error code
101 */
102int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
103{
104 int c, rc;
105
106 for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
107 rc = clk_prepare_enable(hpriv->clks[c]);
108 if (rc)
109 goto disable_unprepare_clk;
110 }
111 return 0;
112
113disable_unprepare_clk:
114 while (--c >= 0)
115 clk_disable_unprepare(hpriv->clks[c]);
116 return rc;
117}
118EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
119
120/**
121 * ahci_platform_disable_clks - Disable platform clocks
122 * @hpriv: host private area to store config values
123 *
124 * This function disables all the clks found in hpriv->clks, in reverse
125 * order of ahci_platform_enable_clks (starting at the end of the array).
126 */
127void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
128{
129 int c;
130
131 for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
132 if (hpriv->clks[c])
133 clk_disable_unprepare(hpriv->clks[c]);
134}
135EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
136
137/**
138 * ahci_platform_enable_regulators - Enable regulators
139 * @hpriv: host private area to store config values
140 *
141 * This function enables all the regulators found in
142 * hpriv->target_pwrs, if any. If a regulator fails to be enabled, it
143 * disables all the regulators already enabled in reverse order and
144 * returns an error.
145 *
146 * RETURNS:
147 * 0 on success otherwise a negative error code
148 */
149int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
150{
151 int rc, i;
152
153 for (i = 0; i < hpriv->nports; i++) {
154 if (!hpriv->target_pwrs[i])
155 continue;
156
157 rc = regulator_enable(hpriv->target_pwrs[i]);
158 if (rc)
159 goto disable_target_pwrs;
160 }
161
162 return 0;
163
164disable_target_pwrs:
165 while (--i >= 0)
166 if (hpriv->target_pwrs[i])
167 regulator_disable(hpriv->target_pwrs[i]);
168
169 return rc;
170}
171EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
172
173/**
174 * ahci_platform_disable_regulators - Disable regulators
175 * @hpriv: host private area to store config values
176 *
177 * This function disables all regulators found in hpriv->target_pwrs.
178 */
179void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
180{
181 int i;
182
183 for (i = 0; i < hpriv->nports; i++) {
184 if (!hpriv->target_pwrs[i])
185 continue;
186 regulator_disable(hpriv->target_pwrs[i]);
187 }
188}
189EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
190/**
191 * ahci_platform_enable_resources - Enable platform resources
192 * @hpriv: host private area to store config values
193 *
194 * This function enables all ahci_platform managed resources in the
195 * following order:
196 * 1) Regulator
197 * 2) Clocks (through ahci_platform_enable_clks)
198 * 3) Phys
199 *
200 * If resource enabling fails at any point the previous enabled resources
201 * are disabled in reverse order.
202 *
203 * RETURNS:
204 * 0 on success otherwise a negative error code
205 */
206int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
207{
208 int rc;
209
210 rc = ahci_platform_enable_regulators(hpriv);
211 if (rc)
212 return rc;
213
214 rc = ahci_platform_enable_clks(hpriv);
215 if (rc)
216 goto disable_regulator;
217
218 rc = ahci_platform_enable_phys(hpriv);
219 if (rc)
220 goto disable_clks;
221
222 return 0;
223
224disable_clks:
225 ahci_platform_disable_clks(hpriv);
226
227disable_regulator:
228 ahci_platform_disable_regulators(hpriv);
229
230 return rc;
231}
232EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
233
234/**
235 * ahci_platform_disable_resources - Disable platform resources
236 * @hpriv: host private area to store config values
237 *
238 * This function disables all ahci_platform managed resources in the
239 * following order:
240 * 1) Phys
241 * 2) Clocks (through ahci_platform_disable_clks)
242 * 3) Regulator
243 */
244void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
245{
246 ahci_platform_disable_phys(hpriv);
247
248 ahci_platform_disable_clks(hpriv);
249
250 ahci_platform_disable_regulators(hpriv);
251}
252EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
253
254static void ahci_platform_put_resources(struct device *dev, void *res)
255{
256 struct ahci_host_priv *hpriv = res;
257 int c;
258
259 if (hpriv->got_runtime_pm) {
260 pm_runtime_put_sync(dev);
261 pm_runtime_disable(dev);
262 }
263
264 for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
265 clk_put(hpriv->clks[c]);
266 /*
267 * The regulators are tied to child node device and not to the
268 * SATA device itself. So we can't use devm for automatically
269 * releasing them. We have to do it manually here.
270 */
271 for (c = 0; c < hpriv->nports; c++)
272 if (hpriv->target_pwrs && hpriv->target_pwrs[c])
273 regulator_put(hpriv->target_pwrs[c]);
274
275 kfree(hpriv->target_pwrs);
276}
277
278static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
279 struct device *dev, struct device_node *node)
280{
281 int rc;
282
283 hpriv->phys[port] = devm_of_phy_get(dev, node, NULL);
284
285 if (!IS_ERR(hpriv->phys[port]))
286 return 0;
287
288 rc = PTR_ERR(hpriv->phys[port]);
289 switch (rc) {
290 case -ENOSYS:
291 /* No PHY support. Check if PHY is required. */
292 if (of_find_property(node, "phys", NULL)) {
293 dev_err(dev,
294 "couldn't get PHY in node %s: ENOSYS\n",
295 node->name);
296 break;
297 }
298 case -ENODEV:
299 /* continue normally */
300 hpriv->phys[port] = NULL;
301 rc = 0;
302 break;
303
304 default:
305 dev_err(dev,
306 "couldn't get PHY in node %s: %d\n",
307 node->name, rc);
308
309 break;
310 }
311
312 return rc;
313}
314
315static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
316 struct device *dev)
317{
318 struct regulator *target_pwr;
319 int rc = 0;
320
321 target_pwr = regulator_get_optional(dev, "target");
322
323 if (!IS_ERR(target_pwr))
324 hpriv->target_pwrs[port] = target_pwr;
325 else
326 rc = PTR_ERR(target_pwr);
327
328 return rc;
329}
330
331/**
332 * ahci_platform_get_resources - Get platform resources
333 * @pdev: platform device to get resources for
334 *
335 * This function allocates an ahci_host_priv struct, and gets the following
336 * resources, storing a reference to them inside the returned struct:
337 *
338 * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
339 * 2) regulator for controlling the targets power (optional)
340 * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
341 * or for non devicetree enabled platforms a single clock
342 * 4) phys (optional)
343 *
344 * RETURNS:
345 * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
346 */
347struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
348{
349 struct device *dev = &pdev->dev;
350 struct ahci_host_priv *hpriv;
351 struct clk *clk;
352 struct device_node *child;
353 int i, sz, enabled_ports = 0, rc = -ENOMEM, child_nodes;
354 u32 mask_port_map = 0;
355
356 if (!devres_open_group(dev, NULL, GFP_KERNEL))
357 return ERR_PTR(-ENOMEM);
358
359 hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
360 GFP_KERNEL);
361 if (!hpriv)
362 goto err_out;
363
364 devres_add(dev, hpriv);
365
366 hpriv->mmio = devm_ioremap_resource(dev,
367 platform_get_resource(pdev, IORESOURCE_MEM, 0));
368 if (IS_ERR(hpriv->mmio)) {
369 dev_err(dev, "no mmio space\n");
370 rc = PTR_ERR(hpriv->mmio);
371 goto err_out;
372 }
373
374 for (i = 0; i < AHCI_MAX_CLKS; i++) {
375 /*
376 * For now we must use clk_get(dev, NULL) for the first clock,
377 * because some platforms (da850, spear13xx) are not yet
378 * converted to use devicetree for clocks. For new platforms
379 * this is equivalent to of_clk_get(dev->of_node, 0).
380 */
381 if (i == 0)
382 clk = clk_get(dev, NULL);
383 else
384 clk = of_clk_get(dev->of_node, i);
385
386 if (IS_ERR(clk)) {
387 rc = PTR_ERR(clk);
388 if (rc == -EPROBE_DEFER)
389 goto err_out;
390 break;
391 }
392 hpriv->clks[i] = clk;
393 }
394
395 hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
396
397 /*
398 * If no sub-node was found, we still need to set nports to
399 * one in order to be able to use the
400 * ahci_platform_[en|dis]able_[phys|regulators] functions.
401 */
402 if (!child_nodes)
403 hpriv->nports = 1;
404
405 sz = hpriv->nports * sizeof(*hpriv->phys);
406 hpriv->phys = devm_kzalloc(dev, sz, GFP_KERNEL);
407 if (!hpriv->phys) {
408 rc = -ENOMEM;
409 goto err_out;
410 }
411 sz = hpriv->nports * sizeof(*hpriv->target_pwrs);
412 hpriv->target_pwrs = kzalloc(sz, GFP_KERNEL);
413 if (!hpriv->target_pwrs) {
414 rc = -ENOMEM;
415 goto err_out;
416 }
417
418 if (child_nodes) {
419 for_each_child_of_node(dev->of_node, child) {
420 u32 port;
421 struct platform_device *port_dev __maybe_unused;
422
423 if (!of_device_is_available(child))
424 continue;
425
426 if (of_property_read_u32(child, "reg", &port)) {
427 rc = -EINVAL;
428 goto err_out;
429 }
430
431 if (port >= hpriv->nports) {
432 dev_warn(dev, "invalid port number %d\n", port);
433 continue;
434 }
435 mask_port_map |= BIT(port);
436
437#ifdef CONFIG_OF_ADDRESS
438 of_platform_device_create(child, NULL, NULL);
439
440 port_dev = of_find_device_by_node(child);
441
442 if (port_dev) {
443 rc = ahci_platform_get_regulator(hpriv, port,
444 &port_dev->dev);
445 if (rc == -EPROBE_DEFER)
446 goto err_out;
447 }
448#endif
449
450 rc = ahci_platform_get_phy(hpriv, port, dev, child);
451 if (rc)
452 goto err_out;
453
454 enabled_ports++;
455 }
456 if (!enabled_ports) {
457 dev_warn(dev, "No port enabled\n");
458 rc = -ENODEV;
459 goto err_out;
460 }
461
462 if (!hpriv->mask_port_map)
463 hpriv->mask_port_map = mask_port_map;
464 } else {
465 /*
466 * If no sub-node was found, keep this for device tree
467 * compatibility
468 */
469 rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node);
470 if (rc)
471 goto err_out;
472
473 rc = ahci_platform_get_regulator(hpriv, 0, dev);
474 if (rc == -EPROBE_DEFER)
475 goto err_out;
476 }
477 pm_runtime_enable(dev);
478 pm_runtime_get_sync(dev);
479 hpriv->got_runtime_pm = true;
480
481 devres_remove_group(dev, NULL);
482 return hpriv;
483
484err_out:
485 devres_release_group(dev, NULL);
486 return ERR_PTR(rc);
487}
488EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
489
490/**
491 * ahci_platform_init_host - Bring up an ahci-platform host
492 * @pdev: platform device pointer for the host
493 * @hpriv: ahci-host private data for the host
494 * @pi_template: template for the ata_port_info to use
495 * @sht: scsi_host_template to use when registering
496 *
497 * This function does all the usual steps needed to bring up an
498 * ahci-platform host, note any necessary resources (ie clks, phys, etc.)
499 * must be initialized / enabled before calling this.
500 *
501 * RETURNS:
502 * 0 on success otherwise a negative error code
503 */
504int ahci_platform_init_host(struct platform_device *pdev,
505 struct ahci_host_priv *hpriv,
506 const struct ata_port_info *pi_template,
507 struct scsi_host_template *sht)
508{
509 struct device *dev = &pdev->dev;
510 struct ata_port_info pi = *pi_template;
511 const struct ata_port_info *ppi[] = { &pi, NULL };
512 struct ata_host *host;
513 int i, irq, n_ports, rc;
514
515 irq = platform_get_irq(pdev, 0);
516 if (irq <= 0) {
517 dev_err(dev, "no irq\n");
518 return -EINVAL;
519 }
520
521 hpriv->irq = irq;
522
523 /* prepare host */
524 pi.private_data = (void *)(unsigned long)hpriv->flags;
525
526 ahci_save_initial_config(dev, hpriv);
527
528 if (hpriv->cap & HOST_CAP_NCQ)
529 pi.flags |= ATA_FLAG_NCQ;
530
531 if (hpriv->cap & HOST_CAP_PMP)
532 pi.flags |= ATA_FLAG_PMP;
533
534 ahci_set_em_messages(hpriv, &pi);
535
536 /* CAP.NP sometimes indicate the index of the last enabled
537 * port, at other times, that of the last possible port, so
538 * determining the maximum port number requires looking at
539 * both CAP.NP and port_map.
540 */
541 n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
542
543 host = ata_host_alloc_pinfo(dev, ppi, n_ports);
544 if (!host)
545 return -ENOMEM;
546
547 host->private_data = hpriv;
548
549 if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
550 host->flags |= ATA_HOST_PARALLEL_SCAN;
551 else
552 dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
553
554 if (pi.flags & ATA_FLAG_EM)
555 ahci_reset_em(host);
556
557 for (i = 0; i < host->n_ports; i++) {
558 struct ata_port *ap = host->ports[i];
559
560 ata_port_desc(ap, "mmio %pR",
561 platform_get_resource(pdev, IORESOURCE_MEM, 0));
562 ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
563
564 /* set enclosure management message type */
565 if (ap->flags & ATA_FLAG_EM)
566 ap->em_message_type = hpriv->em_msg_type;
567
568 /* disabled/not-implemented port */
569 if (!(hpriv->port_map & (1 << i)))
570 ap->ops = &ata_dummy_port_ops;
571 }
572
573 if (hpriv->cap & HOST_CAP_64) {
574 rc = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
575 if (rc) {
576 rc = dma_coerce_mask_and_coherent(dev,
577 DMA_BIT_MASK(32));
578 if (rc) {
579 dev_err(dev, "Failed to enable 64-bit DMA.\n");
580 return rc;
581 }
582 dev_warn(dev, "Enable 32-bit DMA instead of 64-bit.\n");
583 }
584 }
585
586 rc = ahci_reset_controller(host);
587 if (rc)
588 return rc;
589
590 ahci_init_controller(host);
591 ahci_print_info(host, "platform");
592
593 return ahci_host_activate(host, sht);
594}
595EXPORT_SYMBOL_GPL(ahci_platform_init_host);
596
597static void ahci_host_stop(struct ata_host *host)
598{
599 struct ahci_host_priv *hpriv = host->private_data;
600
601 ahci_platform_disable_resources(hpriv);
602}
603
604#ifdef CONFIG_PM_SLEEP
605/**
606 * ahci_platform_suspend_host - Suspend an ahci-platform host
607 * @dev: device pointer for the host
608 *
609 * This function does all the usual steps needed to suspend an
610 * ahci-platform host, note any necessary resources (ie clks, phys, etc.)
611 * must be disabled after calling this.
612 *
613 * RETURNS:
614 * 0 on success otherwise a negative error code
615 */
616int ahci_platform_suspend_host(struct device *dev)
617{
618 struct ata_host *host = dev_get_drvdata(dev);
619 struct ahci_host_priv *hpriv = host->private_data;
620 void __iomem *mmio = hpriv->mmio;
621 u32 ctl;
622
623 if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
624 dev_err(dev, "firmware update required for suspend/resume\n");
625 return -EIO;
626 }
627
628 /*
629 * AHCI spec rev1.1 section 8.3.3:
630 * Software must disable interrupts prior to requesting a
631 * transition of the HBA to D3 state.
632 */
633 ctl = readl(mmio + HOST_CTL);
634 ctl &= ~HOST_IRQ_EN;
635 writel(ctl, mmio + HOST_CTL);
636 readl(mmio + HOST_CTL); /* flush */
637
638 return ata_host_suspend(host, PMSG_SUSPEND);
639}
640EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
641
642/**
643 * ahci_platform_resume_host - Resume an ahci-platform host
644 * @dev: device pointer for the host
645 *
646 * This function does all the usual steps needed to resume an ahci-platform
647 * host, note any necessary resources (ie clks, phys, etc.) must be
648 * initialized / enabled before calling this.
649 *
650 * RETURNS:
651 * 0 on success otherwise a negative error code
652 */
653int ahci_platform_resume_host(struct device *dev)
654{
655 struct ata_host *host = dev_get_drvdata(dev);
656 int rc;
657
658 if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
659 rc = ahci_reset_controller(host);
660 if (rc)
661 return rc;
662
663 ahci_init_controller(host);
664 }
665
666 ata_host_resume(host);
667
668 return 0;
669}
670EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
671
672/**
673 * ahci_platform_suspend - Suspend an ahci-platform device
674 * @dev: the platform device to suspend
675 *
676 * This function suspends the host associated with the device, followed by
677 * disabling all the resources of the device.
678 *
679 * RETURNS:
680 * 0 on success otherwise a negative error code
681 */
682int ahci_platform_suspend(struct device *dev)
683{
684 struct ata_host *host = dev_get_drvdata(dev);
685 struct ahci_host_priv *hpriv = host->private_data;
686 int rc;
687
688 rc = ahci_platform_suspend_host(dev);
689 if (rc)
690 return rc;
691
692 ahci_platform_disable_resources(hpriv);
693
694 return 0;
695}
696EXPORT_SYMBOL_GPL(ahci_platform_suspend);
697
698/**
699 * ahci_platform_resume - Resume an ahci-platform device
700 * @dev: the platform device to resume
701 *
702 * This function enables all the resources of the device followed by
703 * resuming the host associated with the device.
704 *
705 * RETURNS:
706 * 0 on success otherwise a negative error code
707 */
708int ahci_platform_resume(struct device *dev)
709{
710 struct ata_host *host = dev_get_drvdata(dev);
711 struct ahci_host_priv *hpriv = host->private_data;
712 int rc;
713
714 rc = ahci_platform_enable_resources(hpriv);
715 if (rc)
716 return rc;
717
718 rc = ahci_platform_resume_host(dev);
719 if (rc)
720 goto disable_resources;
721
722 /* We resumed so update PM runtime state */
723 pm_runtime_disable(dev);
724 pm_runtime_set_active(dev);
725 pm_runtime_enable(dev);
726
727 return 0;
728
729disable_resources:
730 ahci_platform_disable_resources(hpriv);
731
732 return rc;
733}
734EXPORT_SYMBOL_GPL(ahci_platform_resume);
735#endif
736
737MODULE_DESCRIPTION("AHCI SATA platform library");
738MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
739MODULE_LICENSE("GPL");