Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Serial port routines for use during early boot reporting. This code is
4 * included from both the compressed kernel and the regular kernel.
5 */
6#include "boot.h"
7
8#define DEFAULT_SERIAL_PORT 0x3f8 /* ttyS0 */
9
10#define DLAB 0x80
11
12#define TXR 0 /* Transmit register (WRITE) */
13#define RXR 0 /* Receive register (READ) */
14#define IER 1 /* Interrupt Enable */
15#define IIR 2 /* Interrupt ID */
16#define FCR 2 /* FIFO control */
17#define LCR 3 /* Line control */
18#define MCR 4 /* Modem control */
19#define LSR 5 /* Line Status */
20#define MSR 6 /* Modem Status */
21#define DLL 0 /* Divisor Latch Low */
22#define DLH 1 /* Divisor latch High */
23
24#define DEFAULT_BAUD 9600
25
26static void early_serial_init(int port, int baud)
27{
28 unsigned char c;
29 unsigned divisor;
30
31 outb(0x3, port + LCR); /* 8n1 */
32 outb(0, port + IER); /* no interrupt */
33 outb(0, port + FCR); /* no fifo */
34 outb(0x3, port + MCR); /* DTR + RTS */
35
36 divisor = 115200 / baud;
37 c = inb(port + LCR);
38 outb(c | DLAB, port + LCR);
39 outb(divisor & 0xff, port + DLL);
40 outb((divisor >> 8) & 0xff, port + DLH);
41 outb(c & ~DLAB, port + LCR);
42
43 early_serial_base = port;
44}
45
46static void parse_earlyprintk(void)
47{
48 int baud = DEFAULT_BAUD;
49 char arg[32];
50 int pos = 0;
51 int port = 0;
52
53 if (cmdline_find_option("earlyprintk", arg, sizeof(arg)) > 0) {
54 char *e;
55
56 if (!strncmp(arg, "serial", 6)) {
57 port = DEFAULT_SERIAL_PORT;
58 pos += 6;
59 }
60
61 if (arg[pos] == ',')
62 pos++;
63
64 /*
65 * make sure we have
66 * "serial,0x3f8,115200"
67 * "serial,ttyS0,115200"
68 * "ttyS0,115200"
69 */
70 if (pos == 7 && !strncmp(arg + pos, "0x", 2)) {
71 port = simple_strtoull(arg + pos, &e, 16);
72 if (port == 0 || arg + pos == e)
73 port = DEFAULT_SERIAL_PORT;
74 else
75 pos = e - arg;
76 } else if (!strncmp(arg + pos, "ttyS", 4)) {
77 static const int bases[] = { 0x3f8, 0x2f8 };
78 int idx = 0;
79
80 /* += strlen("ttyS"); */
81 pos += 4;
82
83 if (arg[pos++] == '1')
84 idx = 1;
85
86 port = bases[idx];
87 }
88
89 if (arg[pos] == ',')
90 pos++;
91
92 baud = simple_strtoull(arg + pos, &e, 0);
93 if (baud == 0 || arg + pos == e)
94 baud = DEFAULT_BAUD;
95 }
96
97 if (port)
98 early_serial_init(port, baud);
99}
100
101#define BASE_BAUD (1843200/16)
102static unsigned int probe_baud(int port)
103{
104 unsigned char lcr, dll, dlh;
105 unsigned int quot;
106
107 lcr = inb(port + LCR);
108 outb(lcr | DLAB, port + LCR);
109 dll = inb(port + DLL);
110 dlh = inb(port + DLH);
111 outb(lcr, port + LCR);
112 quot = (dlh << 8) | dll;
113
114 return BASE_BAUD / quot;
115}
116
117static void parse_console_uart8250(void)
118{
119 char optstr[64], *options;
120 int baud = DEFAULT_BAUD;
121 int port = 0;
122
123 /*
124 * console=uart8250,io,0x3f8,115200n8
125 * need to make sure it is last one console !
126 */
127 if (cmdline_find_option("console", optstr, sizeof(optstr)) <= 0)
128 return;
129
130 options = optstr;
131
132 if (!strncmp(options, "uart8250,io,", 12))
133 port = simple_strtoull(options + 12, &options, 0);
134 else if (!strncmp(options, "uart,io,", 8))
135 port = simple_strtoull(options + 8, &options, 0);
136 else
137 return;
138
139 if (options && (options[0] == ','))
140 baud = simple_strtoull(options + 1, &options, 0);
141 else
142 baud = probe_baud(port);
143
144 if (port)
145 early_serial_init(port, baud);
146}
147
148void console_init(void)
149{
150 parse_earlyprintk();
151
152 if (!early_serial_base)
153 parse_console_uart8250();
154}
1#include "boot.h"
2
3#define DEFAULT_SERIAL_PORT 0x3f8 /* ttyS0 */
4
5#define DLAB 0x80
6
7#define TXR 0 /* Transmit register (WRITE) */
8#define RXR 0 /* Receive register (READ) */
9#define IER 1 /* Interrupt Enable */
10#define IIR 2 /* Interrupt ID */
11#define FCR 2 /* FIFO control */
12#define LCR 3 /* Line control */
13#define MCR 4 /* Modem control */
14#define LSR 5 /* Line Status */
15#define MSR 6 /* Modem Status */
16#define DLL 0 /* Divisor Latch Low */
17#define DLH 1 /* Divisor latch High */
18
19#define DEFAULT_BAUD 9600
20
21static void early_serial_init(int port, int baud)
22{
23 unsigned char c;
24 unsigned divisor;
25
26 outb(0x3, port + LCR); /* 8n1 */
27 outb(0, port + IER); /* no interrupt */
28 outb(0, port + FCR); /* no fifo */
29 outb(0x3, port + MCR); /* DTR + RTS */
30
31 divisor = 115200 / baud;
32 c = inb(port + LCR);
33 outb(c | DLAB, port + LCR);
34 outb(divisor & 0xff, port + DLL);
35 outb((divisor >> 8) & 0xff, port + DLH);
36 outb(c & ~DLAB, port + LCR);
37
38 early_serial_base = port;
39}
40
41static void parse_earlyprintk(void)
42{
43 int baud = DEFAULT_BAUD;
44 char arg[32];
45 int pos = 0;
46 int port = 0;
47
48 if (cmdline_find_option("earlyprintk", arg, sizeof arg) > 0) {
49 char *e;
50
51 if (!strncmp(arg, "serial", 6)) {
52 port = DEFAULT_SERIAL_PORT;
53 pos += 6;
54 }
55
56 if (arg[pos] == ',')
57 pos++;
58
59 /*
60 * make sure we have
61 * "serial,0x3f8,115200"
62 * "serial,ttyS0,115200"
63 * "ttyS0,115200"
64 */
65 if (pos == 7 && !strncmp(arg + pos, "0x", 2)) {
66 port = simple_strtoull(arg + pos, &e, 16);
67 if (port == 0 || arg + pos == e)
68 port = DEFAULT_SERIAL_PORT;
69 else
70 pos = e - arg;
71 } else if (!strncmp(arg + pos, "ttyS", 4)) {
72 static const int bases[] = { 0x3f8, 0x2f8 };
73 int idx = 0;
74
75 /* += strlen("ttyS"); */
76 pos += 4;
77
78 if (arg[pos++] == '1')
79 idx = 1;
80
81 port = bases[idx];
82 }
83
84 if (arg[pos] == ',')
85 pos++;
86
87 baud = simple_strtoull(arg + pos, &e, 0);
88 if (baud == 0 || arg + pos == e)
89 baud = DEFAULT_BAUD;
90 }
91
92 if (port)
93 early_serial_init(port, baud);
94}
95
96#define BASE_BAUD (1843200/16)
97static unsigned int probe_baud(int port)
98{
99 unsigned char lcr, dll, dlh;
100 unsigned int quot;
101
102 lcr = inb(port + LCR);
103 outb(lcr | DLAB, port + LCR);
104 dll = inb(port + DLL);
105 dlh = inb(port + DLH);
106 outb(lcr, port + LCR);
107 quot = (dlh << 8) | dll;
108
109 return BASE_BAUD / quot;
110}
111
112static void parse_console_uart8250(void)
113{
114 char optstr[64], *options;
115 int baud = DEFAULT_BAUD;
116 int port = 0;
117
118 /*
119 * console=uart8250,io,0x3f8,115200n8
120 * need to make sure it is last one console !
121 */
122 if (cmdline_find_option("console", optstr, sizeof optstr) <= 0)
123 return;
124
125 options = optstr;
126
127 if (!strncmp(options, "uart8250,io,", 12))
128 port = simple_strtoull(options + 12, &options, 0);
129 else if (!strncmp(options, "uart,io,", 8))
130 port = simple_strtoull(options + 8, &options, 0);
131 else
132 return;
133
134 if (options && (options[0] == ','))
135 baud = simple_strtoull(options + 1, &options, 0);
136 else
137 baud = probe_baud(port);
138
139 if (port)
140 early_serial_init(port, baud);
141}
142
143void console_init(void)
144{
145 parse_earlyprintk();
146
147 if (!early_serial_base)
148 parse_console_uart8250();
149}