Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * OpenRISC setup.c
4 *
5 * Linux architectural port borrowing liberally from similar works of
6 * others. All original copyrights apply as per the original source
7 * declaration.
8 *
9 * Modifications for the OpenRISC architecture:
10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
12 *
13 * This file handles the architecture-dependent parts of initialization
14 */
15
16#include <linux/errno.h>
17#include <linux/sched.h>
18#include <linux/kernel.h>
19#include <linux/mm.h>
20#include <linux/stddef.h>
21#include <linux/unistd.h>
22#include <linux/ptrace.h>
23#include <linux/slab.h>
24#include <linux/tty.h>
25#include <linux/ioport.h>
26#include <linux/delay.h>
27#include <linux/console.h>
28#include <linux/init.h>
29#include <linux/memblock.h>
30#include <linux/seq_file.h>
31#include <linux/serial.h>
32#include <linux/initrd.h>
33#include <linux/of_fdt.h>
34#include <linux/of.h>
35#include <linux/device.h>
36
37#include <asm/sections.h>
38#include <asm/types.h>
39#include <asm/setup.h>
40#include <asm/io.h>
41#include <asm/cpuinfo.h>
42#include <asm/delay.h>
43
44#include "vmlinux.h"
45
46static void __init setup_memory(void)
47{
48 unsigned long ram_start_pfn;
49 unsigned long ram_end_pfn;
50 phys_addr_t memory_start, memory_end;
51
52 memory_end = memory_start = 0;
53
54 /* Find main memory where is the kernel, we assume its the only one */
55 memory_start = memblock_start_of_DRAM();
56 memory_end = memblock_end_of_DRAM();
57
58 if (!memory_end) {
59 panic("No memory!");
60 }
61
62 ram_start_pfn = PFN_UP(memory_start);
63 ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
64
65 /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */
66 min_low_pfn = ram_start_pfn;
67 max_low_pfn = ram_end_pfn;
68 max_pfn = ram_end_pfn;
69
70 /*
71 * initialize the boot-time allocator (with low memory only).
72 *
73 * This makes the memory from the end of the kernel to the end of
74 * RAM usable.
75 */
76 memblock_reserve(__pa(_stext), _end - _stext);
77
78#ifdef CONFIG_BLK_DEV_INITRD
79 /* Then reserve the initrd, if any */
80 if (initrd_start && (initrd_end > initrd_start)) {
81 unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE);
82 unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE);
83
84 memblock_reserve(__pa(aligned_start), aligned_end - aligned_start);
85 }
86#endif /* CONFIG_BLK_DEV_INITRD */
87
88 early_init_fdt_reserve_self();
89 early_init_fdt_scan_reserved_mem();
90
91 memblock_dump_all();
92}
93
94struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS];
95
96static void print_cpuinfo(void)
97{
98 unsigned long upr = mfspr(SPR_UPR);
99 unsigned long vr = mfspr(SPR_VR);
100 unsigned int version;
101 unsigned int revision;
102 struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()];
103
104 version = (vr & SPR_VR_VER) >> 24;
105 revision = (vr & SPR_VR_REV);
106
107 printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
108 version, revision, cpuinfo->clock_frequency / 1000000);
109
110 if (!(upr & SPR_UPR_UP)) {
111 printk(KERN_INFO
112 "-- no UPR register... unable to detect configuration\n");
113 return;
114 }
115
116 if (upr & SPR_UPR_DCP)
117 printk(KERN_INFO
118 "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
119 cpuinfo->dcache_size, cpuinfo->dcache_block_size,
120 cpuinfo->dcache_ways);
121 else
122 printk(KERN_INFO "-- dcache disabled\n");
123 if (upr & SPR_UPR_ICP)
124 printk(KERN_INFO
125 "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
126 cpuinfo->icache_size, cpuinfo->icache_block_size,
127 cpuinfo->icache_ways);
128 else
129 printk(KERN_INFO "-- icache disabled\n");
130
131 if (upr & SPR_UPR_DMP)
132 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
133 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
134 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
135 if (upr & SPR_UPR_IMP)
136 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
137 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
138 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
139
140 printk(KERN_INFO "-- additional features:\n");
141 if (upr & SPR_UPR_DUP)
142 printk(KERN_INFO "-- debug unit\n");
143 if (upr & SPR_UPR_PCUP)
144 printk(KERN_INFO "-- performance counters\n");
145 if (upr & SPR_UPR_PMP)
146 printk(KERN_INFO "-- power management\n");
147 if (upr & SPR_UPR_PICP)
148 printk(KERN_INFO "-- PIC\n");
149 if (upr & SPR_UPR_TTP)
150 printk(KERN_INFO "-- timer\n");
151 if (upr & SPR_UPR_CUP)
152 printk(KERN_INFO "-- custom unit(s)\n");
153}
154
155static struct device_node *setup_find_cpu_node(int cpu)
156{
157 u32 hwid;
158 struct device_node *cpun;
159
160 for_each_of_cpu_node(cpun) {
161 if (of_property_read_u32(cpun, "reg", &hwid))
162 continue;
163 if (hwid == cpu)
164 return cpun;
165 }
166
167 return NULL;
168}
169
170void __init setup_cpuinfo(void)
171{
172 struct device_node *cpu;
173 unsigned long iccfgr, dccfgr;
174 unsigned long cache_set_size;
175 int cpu_id = smp_processor_id();
176 struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id];
177
178 cpu = setup_find_cpu_node(cpu_id);
179 if (!cpu)
180 panic("Couldn't find CPU%d in device tree...\n", cpu_id);
181
182 iccfgr = mfspr(SPR_ICCFGR);
183 cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
184 cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
185 cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
186 cpuinfo->icache_size =
187 cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size;
188
189 dccfgr = mfspr(SPR_DCCFGR);
190 cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
191 cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
192 cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
193 cpuinfo->dcache_size =
194 cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size;
195
196 if (of_property_read_u32(cpu, "clock-frequency",
197 &cpuinfo->clock_frequency)) {
198 printk(KERN_WARNING
199 "Device tree missing CPU 'clock-frequency' parameter."
200 "Assuming frequency 25MHZ"
201 "This is probably not what you want.");
202 }
203
204 cpuinfo->coreid = mfspr(SPR_COREID);
205
206 of_node_put(cpu);
207
208 print_cpuinfo();
209}
210
211/**
212 * or1k_early_setup
213 * @fdt: pointer to the start of the device tree in memory or NULL
214 *
215 * Handles the pointer to the device tree that this kernel is to use
216 * for establishing the available platform devices.
217 *
218 * Falls back on built-in device tree in case null pointer is passed.
219 */
220
221void __init or1k_early_setup(void *fdt)
222{
223 if (fdt)
224 pr_info("FDT at %p\n", fdt);
225 else {
226 fdt = __dtb_start;
227 pr_info("Compiled-in FDT at %p\n", fdt);
228 }
229 early_init_devtree(fdt);
230}
231
232static inline unsigned long extract_value_bits(unsigned long reg,
233 short bit_nr, short width)
234{
235 return (reg >> bit_nr) & (0 << width);
236}
237
238static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
239{
240 while (!(mask & 0x1)) {
241 reg = reg >> 1;
242 mask = mask >> 1;
243 }
244 return mask & reg;
245}
246
247/*
248 * calibrate_delay
249 *
250 * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
251 * from the clock frequency passed in via the device tree
252 *
253 */
254
255void calibrate_delay(void)
256{
257 const int *val;
258 struct device_node *cpu = setup_find_cpu_node(smp_processor_id());
259
260 val = of_get_property(cpu, "clock-frequency", NULL);
261 if (!val)
262 panic("no cpu 'clock-frequency' parameter in device tree");
263 loops_per_jiffy = *val / HZ;
264 pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
265 loops_per_jiffy / (500000 / HZ),
266 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
267
268 of_node_put(cpu);
269}
270
271void __init setup_arch(char **cmdline_p)
272{
273 unflatten_and_copy_device_tree();
274
275 setup_cpuinfo();
276
277#ifdef CONFIG_SMP
278 smp_init_cpus();
279#endif
280
281 /* process 1's initial memory region is the kernel code/data */
282 setup_initial_init_mm(_stext, _etext, _edata, _end);
283
284#ifdef CONFIG_BLK_DEV_INITRD
285 if (initrd_start == initrd_end) {
286 printk(KERN_INFO "Initial ramdisk not found\n");
287 initrd_start = 0;
288 initrd_end = 0;
289 } else {
290 printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
291 (void *)(initrd_start), initrd_end - initrd_start);
292 initrd_below_start_ok = 1;
293 }
294#endif
295
296 /* setup memblock allocator */
297 setup_memory();
298
299 /* paging_init() sets up the MMU and marks all pages as reserved */
300 paging_init();
301
302 *cmdline_p = boot_command_line;
303
304 printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
305}
306
307static int show_cpuinfo(struct seq_file *m, void *v)
308{
309 unsigned int vr, cpucfgr;
310 unsigned int avr;
311 unsigned int version;
312 struct cpuinfo_or1k *cpuinfo = v;
313
314 vr = mfspr(SPR_VR);
315 cpucfgr = mfspr(SPR_CPUCFGR);
316
317#ifdef CONFIG_SMP
318 seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid);
319#endif
320 if (vr & SPR_VR_UVRP) {
321 vr = mfspr(SPR_VR2);
322 version = vr & SPR_VR2_VER;
323 avr = mfspr(SPR_AVR);
324 seq_printf(m, "cpu architecture\t: "
325 "OpenRISC 1000 (%d.%d-rev%d)\n",
326 (avr >> 24) & 0xff,
327 (avr >> 16) & 0xff,
328 (avr >> 8) & 0xff);
329 seq_printf(m, "cpu implementation id\t: 0x%x\n",
330 (vr & SPR_VR2_CPUID) >> 24);
331 seq_printf(m, "cpu version\t\t: 0x%x\n", version);
332 } else {
333 version = (vr & SPR_VR_VER) >> 24;
334 seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version);
335 seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV);
336 }
337 seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ);
338 seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size);
339 seq_printf(m, "dcache block size\t: %d bytes\n",
340 cpuinfo->dcache_block_size);
341 seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways);
342 seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size);
343 seq_printf(m, "icache block size\t: %d bytes\n",
344 cpuinfo->icache_block_size);
345 seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways);
346 seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n",
347 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
348 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
349 seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n",
350 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
351 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
352 seq_printf(m, "bogomips\t\t: %lu.%02lu\n",
353 (loops_per_jiffy * HZ) / 500000,
354 ((loops_per_jiffy * HZ) / 5000) % 100);
355
356 seq_puts(m, "features\t\t: ");
357 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : "");
358 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : "");
359 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : "");
360 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : "");
361 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : "");
362 seq_puts(m, "\n");
363
364 seq_puts(m, "\n");
365
366 return 0;
367}
368
369static void *c_start(struct seq_file *m, loff_t *pos)
370{
371 *pos = cpumask_next(*pos - 1, cpu_online_mask);
372 if ((*pos) < nr_cpu_ids)
373 return &cpuinfo_or1k[*pos];
374 return NULL;
375}
376
377static void *c_next(struct seq_file *m, void *v, loff_t *pos)
378{
379 (*pos)++;
380 return c_start(m, pos);
381}
382
383static void c_stop(struct seq_file *m, void *v)
384{
385}
386
387const struct seq_operations cpuinfo_op = {
388 .start = c_start,
389 .next = c_next,
390 .stop = c_stop,
391 .show = show_cpuinfo,
392};
1/*
2 * OpenRISC setup.c
3 *
4 * Linux architectural port borrowing liberally from similar works of
5 * others. All original copyrights apply as per the original source
6 * declaration.
7 *
8 * Modifications for the OpenRISC architecture:
9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
10 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
16 *
17 * This file handles the architecture-dependent parts of initialization
18 */
19
20#include <linux/errno.h>
21#include <linux/sched.h>
22#include <linux/kernel.h>
23#include <linux/mm.h>
24#include <linux/stddef.h>
25#include <linux/unistd.h>
26#include <linux/ptrace.h>
27#include <linux/slab.h>
28#include <linux/tty.h>
29#include <linux/ioport.h>
30#include <linux/delay.h>
31#include <linux/console.h>
32#include <linux/init.h>
33#include <linux/bootmem.h>
34#include <linux/seq_file.h>
35#include <linux/serial.h>
36#include <linux/initrd.h>
37#include <linux/of_fdt.h>
38#include <linux/of.h>
39#include <linux/memblock.h>
40#include <linux/device.h>
41#include <linux/of_platform.h>
42
43#include <asm/sections.h>
44#include <asm/segment.h>
45#include <asm/pgtable.h>
46#include <asm/types.h>
47#include <asm/setup.h>
48#include <asm/io.h>
49#include <asm/cpuinfo.h>
50#include <asm/delay.h>
51
52#include "vmlinux.h"
53
54static unsigned long __init setup_memory(void)
55{
56 unsigned long bootmap_size;
57 unsigned long ram_start_pfn;
58 unsigned long free_ram_start_pfn;
59 unsigned long ram_end_pfn;
60 phys_addr_t memory_start, memory_end;
61 struct memblock_region *region;
62
63 memory_end = memory_start = 0;
64
65 /* Find main memory where is the kernel */
66 for_each_memblock(memory, region) {
67 memory_start = region->base;
68 memory_end = region->base + region->size;
69 printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
70 memory_start, memory_end);
71 }
72
73 if (!memory_end) {
74 panic("No memory!");
75 }
76
77 ram_start_pfn = PFN_UP(memory_start);
78 /* free_ram_start_pfn is first page after kernel */
79 free_ram_start_pfn = PFN_UP(__pa(_end));
80 ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
81
82 max_pfn = ram_end_pfn;
83
84 /*
85 * initialize the boot-time allocator (with low memory only).
86 *
87 * This makes the memory from the end of the kernel to the end of
88 * RAM usable.
89 * init_bootmem sets the global values min_low_pfn, max_low_pfn.
90 */
91 bootmap_size = init_bootmem(free_ram_start_pfn,
92 ram_end_pfn - ram_start_pfn);
93 free_bootmem(PFN_PHYS(free_ram_start_pfn),
94 (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
95 reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
96 BOOTMEM_DEFAULT);
97
98 for_each_memblock(reserved, region) {
99 printk(KERN_INFO "Reserved - 0x%08x-0x%08x\n",
100 (u32) region->base, (u32) region->size);
101 reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
102 }
103
104 return ram_end_pfn;
105}
106
107struct cpuinfo cpuinfo;
108
109static void print_cpuinfo(void)
110{
111 unsigned long upr = mfspr(SPR_UPR);
112 unsigned long vr = mfspr(SPR_VR);
113 unsigned int version;
114 unsigned int revision;
115
116 version = (vr & SPR_VR_VER) >> 24;
117 revision = (vr & SPR_VR_REV);
118
119 printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
120 version, revision, cpuinfo.clock_frequency / 1000000);
121
122 if (!(upr & SPR_UPR_UP)) {
123 printk(KERN_INFO
124 "-- no UPR register... unable to detect configuration\n");
125 return;
126 }
127
128 if (upr & SPR_UPR_DCP)
129 printk(KERN_INFO
130 "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
131 cpuinfo.dcache_size, cpuinfo.dcache_block_size, 1);
132 else
133 printk(KERN_INFO "-- dcache disabled\n");
134 if (upr & SPR_UPR_ICP)
135 printk(KERN_INFO
136 "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
137 cpuinfo.icache_size, cpuinfo.icache_block_size, 1);
138 else
139 printk(KERN_INFO "-- icache disabled\n");
140
141 if (upr & SPR_UPR_DMP)
142 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
143 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
144 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
145 if (upr & SPR_UPR_IMP)
146 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
147 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
148 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
149
150 printk(KERN_INFO "-- additional features:\n");
151 if (upr & SPR_UPR_DUP)
152 printk(KERN_INFO "-- debug unit\n");
153 if (upr & SPR_UPR_PCUP)
154 printk(KERN_INFO "-- performance counters\n");
155 if (upr & SPR_UPR_PMP)
156 printk(KERN_INFO "-- power management\n");
157 if (upr & SPR_UPR_PICP)
158 printk(KERN_INFO "-- PIC\n");
159 if (upr & SPR_UPR_TTP)
160 printk(KERN_INFO "-- timer\n");
161 if (upr & SPR_UPR_CUP)
162 printk(KERN_INFO "-- custom unit(s)\n");
163}
164
165void __init setup_cpuinfo(void)
166{
167 struct device_node *cpu;
168 unsigned long iccfgr, dccfgr;
169 unsigned long cache_set_size, cache_ways;
170
171 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
172 if (!cpu)
173 panic("No compatible CPU found in device tree...\n");
174
175 iccfgr = mfspr(SPR_ICCFGR);
176 cache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
177 cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
178 cpuinfo.icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
179 cpuinfo.icache_size =
180 cache_set_size * cache_ways * cpuinfo.icache_block_size;
181
182 dccfgr = mfspr(SPR_DCCFGR);
183 cache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
184 cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
185 cpuinfo.dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
186 cpuinfo.dcache_size =
187 cache_set_size * cache_ways * cpuinfo.dcache_block_size;
188
189 if (of_property_read_u32(cpu, "clock-frequency",
190 &cpuinfo.clock_frequency)) {
191 printk(KERN_WARNING
192 "Device tree missing CPU 'clock-frequency' parameter."
193 "Assuming frequency 25MHZ"
194 "This is probably not what you want.");
195 }
196
197 of_node_put(cpu);
198
199 print_cpuinfo();
200}
201
202/**
203 * or32_early_setup
204 *
205 * Handles the pointer to the device tree that this kernel is to use
206 * for establishing the available platform devices.
207 *
208 * Falls back on built-in device tree in case null pointer is passed.
209 */
210
211void __init or32_early_setup(void *fdt)
212{
213 if (fdt)
214 pr_info("FDT at %p\n", fdt);
215 else {
216 fdt = __dtb_start;
217 pr_info("Compiled-in FDT at %p\n", fdt);
218 }
219 early_init_devtree(fdt);
220}
221
222static int __init openrisc_device_probe(void)
223{
224 of_platform_populate(NULL, NULL, NULL, NULL);
225
226 return 0;
227}
228
229device_initcall(openrisc_device_probe);
230
231static inline unsigned long extract_value_bits(unsigned long reg,
232 short bit_nr, short width)
233{
234 return (reg >> bit_nr) & (0 << width);
235}
236
237static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
238{
239 while (!(mask & 0x1)) {
240 reg = reg >> 1;
241 mask = mask >> 1;
242 }
243 return mask & reg;
244}
245
246void __init detect_unit_config(unsigned long upr, unsigned long mask,
247 char *text, void (*func) (void))
248{
249 if (text != NULL)
250 printk("%s", text);
251
252 if (upr & mask) {
253 if (func != NULL)
254 func();
255 else
256 printk("present\n");
257 } else
258 printk("not present\n");
259}
260
261/*
262 * calibrate_delay
263 *
264 * Lightweight calibrate_delay implementation that calculates loops_per_jiffy
265 * from the clock frequency passed in via the device tree
266 *
267 */
268
269void calibrate_delay(void)
270{
271 const int *val;
272 struct device_node *cpu = NULL;
273 cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
274 val = of_get_property(cpu, "clock-frequency", NULL);
275 if (!val)
276 panic("no cpu 'clock-frequency' parameter in device tree");
277 loops_per_jiffy = *val / HZ;
278 pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
279 loops_per_jiffy / (500000 / HZ),
280 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
281}
282
283void __init setup_arch(char **cmdline_p)
284{
285 unsigned long max_low_pfn;
286
287 unflatten_and_copy_device_tree();
288
289 setup_cpuinfo();
290
291 /* process 1's initial memory region is the kernel code/data */
292 init_mm.start_code = (unsigned long)_stext;
293 init_mm.end_code = (unsigned long)_etext;
294 init_mm.end_data = (unsigned long)_edata;
295 init_mm.brk = (unsigned long)_end;
296
297#ifdef CONFIG_BLK_DEV_INITRD
298 initrd_start = (unsigned long)&__initrd_start;
299 initrd_end = (unsigned long)&__initrd_end;
300 if (initrd_start == initrd_end) {
301 initrd_start = 0;
302 initrd_end = 0;
303 }
304 initrd_below_start_ok = 1;
305#endif
306
307 /* setup bootmem allocator */
308 max_low_pfn = setup_memory();
309
310 /* paging_init() sets up the MMU and marks all pages as reserved */
311 paging_init();
312
313#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
314 if (!conswitchp)
315 conswitchp = &dummy_con;
316#endif
317
318 *cmdline_p = boot_command_line;
319
320 printk(KERN_INFO "OpenRISC Linux -- http://openrisc.net\n");
321}
322
323static int show_cpuinfo(struct seq_file *m, void *v)
324{
325 unsigned long vr;
326 int version, revision;
327
328 vr = mfspr(SPR_VR);
329 version = (vr & SPR_VR_VER) >> 24;
330 revision = vr & SPR_VR_REV;
331
332 seq_printf(m,
333 "cpu\t\t: OpenRISC-%x\n"
334 "revision\t: %d\n"
335 "frequency\t: %ld\n"
336 "dcache size\t: %d bytes\n"
337 "dcache block size\t: %d bytes\n"
338 "icache size\t: %d bytes\n"
339 "icache block size\t: %d bytes\n"
340 "immu\t\t: %d entries, %lu ways\n"
341 "dmmu\t\t: %d entries, %lu ways\n"
342 "bogomips\t: %lu.%02lu\n",
343 version,
344 revision,
345 loops_per_jiffy * HZ,
346 cpuinfo.dcache_size,
347 cpuinfo.dcache_block_size,
348 cpuinfo.icache_size,
349 cpuinfo.icache_block_size,
350 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
351 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW),
352 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
353 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW),
354 (loops_per_jiffy * HZ) / 500000,
355 ((loops_per_jiffy * HZ) / 5000) % 100);
356
357 return 0;
358}
359
360static void *c_start(struct seq_file *m, loff_t * pos)
361{
362 /* We only have one CPU... */
363 return *pos < 1 ? (void *)1 : NULL;
364}
365
366static void *c_next(struct seq_file *m, void *v, loff_t * pos)
367{
368 ++*pos;
369 return NULL;
370}
371
372static void c_stop(struct seq_file *m, void *v)
373{
374}
375
376const struct seq_operations cpuinfo_op = {
377 .start = c_start,
378 .next = c_next,
379 .stop = c_stop,
380 .show = show_cpuinfo,
381};