Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/* Device tree file for the Zyxel NSA 325 NAS box.
3 *
4 * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
5 *
6 *
7 * Based upon the board setup file created by Peter Schildmann
8 */
9
10/dts-v1/;
11
12#include "kirkwood-nsa3x0-common.dtsi"
13
14/ {
15 model = "ZyXEL NSA325";
16 compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
17
18 memory {
19 device_type = "memory";
20 reg = <0x00000000 0x20000000>;
21 };
22
23 chosen {
24 bootargs = "console=ttyS0,115200";
25 stdout-path = &uart0;
26 };
27
28 ocp@f1000000 {
29 pinctrl: pin-controller@10000 {
30 pinctrl-names = "default";
31
32 pmx_led_hdd2_green: pmx-led-hdd2-green {
33 marvell,pins = "mpp12";
34 marvell,function = "gpio";
35 };
36
37 pmx_led_hdd2_red: pmx-led-hdd2-red {
38 marvell,pins = "mpp13";
39 marvell,function = "gpio";
40 };
41
42 pmx_mcu_data: pmx-mcu-data {
43 marvell,pins = "mpp14";
44 marvell,function = "gpio";
45 };
46
47 pmx_led_usb_green: pmx-led-usb-green {
48 marvell,pins = "mpp15";
49 marvell,function = "gpio";
50 };
51
52 pmx_mcu_clk: pmx-mcu-clk {
53 marvell,pins = "mpp16";
54 marvell,function = "gpio";
55 };
56
57 pmx_mcu_act: pmx-mcu-act {
58 marvell,pins = "mpp17";
59 marvell,function = "gpio";
60 };
61
62 pmx_led_sys_green: pmx-led-sys-green {
63 marvell,pins = "mpp28";
64 marvell,function = "gpio";
65 };
66
67 pmx_led_sys_orange: pmx-led-sys-orange {
68 marvell,pins = "mpp29";
69 marvell,function = "gpio";
70 };
71
72 pmx_led_hdd1_green: pmx-led-hdd1-green {
73 marvell,pins = "mpp41";
74 marvell,function = "gpio";
75 };
76
77 pmx_led_hdd1_red: pmx-led-hdd1-red {
78 marvell,pins = "mpp42";
79 marvell,function = "gpio";
80 };
81
82 pmx_htp: pmx-htp {
83 marvell,pins = "mpp43";
84 marvell,function = "gpio";
85 };
86
87 /*
88 * Buzzer needs to be switched at around 1kHz so is
89 * not compatible with the gpio-beeper driver.
90 */
91 pmx_buzzer: pmx-buzzer {
92 marvell,pins = "mpp44";
93 marvell,function = "gpio";
94 };
95
96 pmx_vid_b1: pmx-vid-b1 {
97 marvell,pins = "mpp45";
98 marvell,function = "gpio";
99 };
100
101 pmx_power_resume_data: pmx-power-resume-data {
102 marvell,pins = "mpp47";
103 marvell,function = "gpio";
104 };
105
106 pmx_power_resume_clk: pmx-power-resume-clk {
107 marvell,pins = "mpp49";
108 marvell,function = "gpio";
109 };
110
111 pmx_pwr_sata1: pmx-pwr-sata1 {
112 marvell,pins = "mpp47";
113 marvell,function = "gpio";
114 };
115 };
116
117 /* This board uses the pcf8563 RTC instead of the SoC RTC */
118 rtc@10300 {
119 status = "disabled";
120 };
121
122 i2c@11000 {
123 status = "okay";
124
125 pcf8563: pcf8563@51 {
126 compatible = "nxp,pcf8563";
127 reg = <0x51>;
128 };
129 };
130 };
131
132 regulators {
133 compatible = "simple-bus";
134 #address-cells = <1>;
135 #size-cells = <0>;
136 pinctrl-0 = <&pmx_pwr_sata1>;
137 pinctrl-names = "default";
138
139 usb0_power: regulator@1 {
140 enable-active-high;
141 };
142
143 sata1_power: regulator@2 {
144 compatible = "regulator-fixed";
145 reg = <2>;
146 regulator-name = "SATA1 Power";
147 regulator-min-microvolt = <5000000>;
148 regulator-max-microvolt = <5000000>;
149 regulator-always-on;
150 regulator-boot-on;
151 enable-active-high;
152 gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
153 };
154 };
155
156 gpio-leds {
157 compatible = "gpio-leds";
158 pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
159 &pmx_led_usb_green
160 &pmx_led_sys_green &pmx_led_sys_orange
161 &pmx_led_copy_green &pmx_led_copy_red
162 &pmx_led_hdd1_green &pmx_led_hdd1_red>;
163 pinctrl-names = "default";
164
165 green-sys {
166 label = "nsa325:green:sys";
167 gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
168 };
169 orange-sys {
170 label = "nsa325:orange:sys";
171 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
172 };
173 green-hdd1 {
174 label = "nsa325:green:hdd1";
175 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
176 };
177 red-hdd1 {
178 label = "nsa325:red:hdd1";
179 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
180 };
181 green-hdd2 {
182 label = "nsa325:green:hdd2";
183 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
184 };
185 red-hdd2 {
186 label = "nsa325:red:hdd2";
187 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
188 };
189 green-usb {
190 label = "nsa325:green:usb";
191 gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
192 };
193 green-copy {
194 label = "nsa325:green:copy";
195 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
196 };
197 red-copy {
198 label = "nsa325:red:copy";
199 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
200 };
201
202 /* The following pins are currently not assigned to a driver,
203 some of them should be configured as inputs.
204 pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
205 &pmx_htp &pmx_vid_b1
206 &pmx_power_resume_data &pmx_power_resume_clk>; */
207 };
208
209
210};
211
212&mdio {
213 status = "okay";
214 ethphy0: ethernet-phy@1 {
215 reg = <1>;
216 };
217};
218
219ð0 {
220 status = "okay";
221 ethernet0-port@0 {
222 phy-handle = <ðphy0>;
223 };
224};
225
226&pciec {
227 status = "okay";
228};
229
230&pcie0 {
231 status = "okay";
232};
1/* Device tree file for the Zyxel NSA 325 NAS box.
2 *
3 * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version
8 * 2 of the License, or (at your option) any later version.
9 *
10 * Based upon the board setup file created by Peter Schildmann
11 */
12
13/dts-v1/;
14
15#include "kirkwood-nsa3x0-common.dtsi"
16
17/ {
18 model = "ZyXEL NSA325";
19 compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
20
21 memory {
22 device_type = "memory";
23 reg = <0x00000000 0x20000000>;
24 };
25
26 chosen {
27 bootargs = "console=ttyS0,115200";
28 stdout-path = &uart0;
29 };
30
31 mbus {
32 pcie-controller {
33 status = "okay";
34
35 pcie@1,0 {
36 status = "okay";
37 };
38 };
39 };
40
41 ocp@f1000000 {
42 pinctrl: pin-controller@10000 {
43 pinctrl-names = "default";
44
45 pmx_led_hdd2_green: pmx-led-hdd2-green {
46 marvell,pins = "mpp12";
47 marvell,function = "gpio";
48 };
49
50 pmx_led_hdd2_red: pmx-led-hdd2-red {
51 marvell,pins = "mpp13";
52 marvell,function = "gpio";
53 };
54
55 pmx_mcu_data: pmx-mcu-data {
56 marvell,pins = "mpp14";
57 marvell,function = "gpio";
58 };
59
60 pmx_led_usb_green: pmx-led-usb-green {
61 marvell,pins = "mpp15";
62 marvell,function = "gpio";
63 };
64
65 pmx_mcu_clk: pmx-mcu-clk {
66 marvell,pins = "mpp16";
67 marvell,function = "gpio";
68 };
69
70 pmx_mcu_act: pmx-mcu-act {
71 marvell,pins = "mpp17";
72 marvell,function = "gpio";
73 };
74
75 pmx_led_sys_green: pmx-led-sys-green {
76 marvell,pins = "mpp28";
77 marvell,function = "gpio";
78 };
79
80 pmx_led_sys_orange: pmx-led-sys-orange {
81 marvell,pins = "mpp29";
82 marvell,function = "gpio";
83 };
84
85 pmx_led_hdd1_green: pmx-led-hdd1-green {
86 marvell,pins = "mpp41";
87 marvell,function = "gpio";
88 };
89
90 pmx_led_hdd1_red: pmx-led-hdd1-red {
91 marvell,pins = "mpp42";
92 marvell,function = "gpio";
93 };
94
95 pmx_htp: pmx-htp {
96 marvell,pins = "mpp43";
97 marvell,function = "gpio";
98 };
99
100 /*
101 * Buzzer needs to be switched at around 1kHz so is
102 * not compatible with the gpio-beeper driver.
103 */
104 pmx_buzzer: pmx-buzzer {
105 marvell,pins = "mpp44";
106 marvell,function = "gpio";
107 };
108
109 pmx_vid_b1: pmx-vid-b1 {
110 marvell,pins = "mpp45";
111 marvell,function = "gpio";
112 };
113
114 pmx_power_resume_data: pmx-power-resume-data {
115 marvell,pins = "mpp47";
116 marvell,function = "gpio";
117 };
118
119 pmx_power_resume_clk: pmx-power-resume-clk {
120 marvell,pins = "mpp49";
121 marvell,function = "gpio";
122 };
123
124 pmx_pwr_sata1: pmx-pwr-sata1 {
125 marvell,pins = "mpp47";
126 marvell,function = "gpio";
127 };
128 };
129
130 /* This board uses the pcf8563 RTC instead of the SoC RTC */
131 rtc@10300 {
132 status = "disabled";
133 };
134
135 i2c@11000 {
136 status = "okay";
137
138 pcf8563: pcf8563@51 {
139 compatible = "nxp,pcf8563";
140 reg = <0x51>;
141 };
142 };
143 };
144
145 regulators {
146 compatible = "simple-bus";
147 #address-cells = <1>;
148 #size-cells = <0>;
149 pinctrl-0 = <&pmx_pwr_sata1>;
150 pinctrl-names = "default";
151
152 usb0_power: regulator@1 {
153 enable-active-high;
154 };
155
156 sata1_power: regulator@2 {
157 compatible = "regulator-fixed";
158 reg = <2>;
159 regulator-name = "SATA1 Power";
160 regulator-min-microvolt = <5000000>;
161 regulator-max-microvolt = <5000000>;
162 regulator-always-on;
163 regulator-boot-on;
164 enable-active-high;
165 gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
166 };
167 };
168
169 gpio-leds {
170 compatible = "gpio-leds";
171 pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
172 &pmx_led_usb_green
173 &pmx_led_sys_green &pmx_led_sys_orange
174 &pmx_led_copy_green &pmx_led_copy_red
175 &pmx_led_hdd1_green &pmx_led_hdd1_red>;
176 pinctrl-names = "default";
177
178 green-sys {
179 label = "nsa325:green:sys";
180 gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
181 };
182 orange-sys {
183 label = "nsa325:orange:sys";
184 gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
185 };
186 green-hdd1 {
187 label = "nsa325:green:hdd1";
188 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
189 };
190 red-hdd1 {
191 label = "nsa325:red:hdd1";
192 gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
193 };
194 green-hdd2 {
195 label = "nsa325:green:hdd2";
196 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
197 };
198 red-hdd2 {
199 label = "nsa325:red:hdd2";
200 gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
201 };
202 green-usb {
203 label = "nsa325:green:usb";
204 gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
205 };
206 green-copy {
207 label = "nsa325:green:copy";
208 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
209 };
210 red-copy {
211 label = "nsa325:red:copy";
212 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
213 };
214
215 /* The following pins are currently not assigned to a driver,
216 some of them should be configured as inputs.
217 pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
218 &pmx_htp &pmx_vid_b1
219 &pmx_power_resume_data &pmx_power_resume_clk>; */
220 };
221
222
223};
224
225&mdio {
226 status = "okay";
227 ethphy0: ethernet-phy@1 {
228 reg = <1>;
229 };
230};
231
232ð0 {
233 status = "okay";
234 ethernet0-port@0 {
235 phy-handle = <ðphy0>;
236 };
237};
238