Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/dts-v1/;
3
4#include "dm816x.dtsi"
5#include <dt-bindings/interrupt-controller/irq.h>
6
7/ {
8 model = "DM8168 EVM";
9 compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
10
11 memory@80000000 {
12 device_type = "memory";
13 reg = <0x80000000 0x40000000 /* 1 GB */
14 0xc0000000 0x40000000>; /* 1 GB */
15 };
16
17 /* FDC6331L controlled by SD_POW pin */
18 vmmcsd_fixed: fixedregulator0 {
19 compatible = "regulator-fixed";
20 regulator-name = "vmmcsd_fixed";
21 regulator-min-microvolt = <3300000>;
22 regulator-max-microvolt = <3300000>;
23 };
24
25 sata_refclk: fixedclock0 {
26 compatible = "fixed-clock";
27 #clock-cells = <0>;
28 clock-frequency = <100000000>;
29 };
30};
31
32&dm816x_pinmux {
33 mcspi1_pins: pinmux_mcspi1_pins {
34 pinctrl-single,pins = <
35 DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
36 DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
37 DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
38 DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
39 >;
40 };
41
42 mmc_pins: pinmux_mmc_pins {
43 pinctrl-single,pins = <
44 DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
45 DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
46 DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
47 DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
48 DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
49 DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
50 DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
51 DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
52 DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
53 >;
54 };
55
56 usb0_pins: pinmux_usb0_pins {
57 pinctrl-single,pins = <
58 DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
59 >;
60 };
61
62 usb1_pins: pinmux_usb1_pins {
63 pinctrl-single,pins = <
64 DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
65 >;
66 };
67
68 nandflash_pins: nandflash_pins {
69 pinctrl-single,pins = <
70 DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0) /* PINCTRL207 GPMC_CS0*/
71 DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0) /* PINCTRL217 GPMC_ADV_ALE */
72 DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0) /* PINCTRL214 GPMC_OE_RE */
73 DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0) /* PINCTRL215 GPMC_BE0_CLE */
74 DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0) /* PINCTRL213 GPMC_WE */
75 DM816X_IOPAD(0x0b6c, MUX_MODE0) /* PINCTRL220 GPMC_WAIT */
76 DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0) /* PINCTRL250 GPMC_CLK */
77 DM816X_IOPAD(0x0ba4, MUX_MODE0) /* PINCTRL234 GPMC_D0 */
78 DM816X_IOPAD(0x0ba8, MUX_MODE0) /* PINCTRL234 GPMC_D1 */
79 DM816X_IOPAD(0x0bac, MUX_MODE0) /* PINCTRL234 GPMC_D2 */
80 DM816X_IOPAD(0x0bb0, MUX_MODE0) /* PINCTRL234 GPMC_D3 */
81 DM816X_IOPAD(0x0bb4, MUX_MODE0) /* PINCTRL234 GPMC_D4 */
82 DM816X_IOPAD(0x0bb8, MUX_MODE0) /* PINCTRL234 GPMC_D5 */
83 DM816X_IOPAD(0x0bbc, MUX_MODE0) /* PINCTRL234 GPMC_D6 */
84 DM816X_IOPAD(0x0bc0, MUX_MODE0) /* PINCTRL234 GPMC_D7 */
85 DM816X_IOPAD(0x0bc4, MUX_MODE0) /* PINCTRL234 GPMC_D8 */
86 DM816X_IOPAD(0x0bc8, MUX_MODE0) /* PINCTRL234 GPMC_D9 */
87 DM816X_IOPAD(0x0bcc, MUX_MODE0) /* PINCTRL234 GPMC_D10 */
88 DM816X_IOPAD(0x0bd0, MUX_MODE0) /* PINCTRL234 GPMC_D11 */
89 DM816X_IOPAD(0x0bd4, MUX_MODE0) /* PINCTRL234 GPMC_D12 */
90 DM816X_IOPAD(0x0bd8, MUX_MODE0) /* PINCTRL234 GPMC_D13 */
91 DM816X_IOPAD(0x0bdc, MUX_MODE0) /* PINCTRL234 GPMC_D14 */
92 DM816X_IOPAD(0x0be0, MUX_MODE0) /* PINCTRL234 GPMC_D15 */
93 >;
94 };
95};
96
97&i2c1 {
98 extgpio0: pcf8575@20 {
99 compatible = "nxp,pcf8575";
100 reg = <0x20>;
101 gpio-controller;
102 #gpio-cells = <2>;
103 };
104};
105
106&i2c2 {
107 extgpio1: pcf8575@20 {
108 compatible = "nxp,pcf8575";
109 reg = <0x20>;
110 gpio-controller;
111 #gpio-cells = <2>;
112 };
113};
114
115&gpmc {
116 ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
117 pinctrl-names = "default";
118 pinctrl-0 = <&nandflash_pins>;
119
120 nand@0,0 {
121 compatible = "ti,omap2-nand";
122 linux,mtd-name = "micron,mt29f2g16aadwp";
123 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
124 interrupt-parent = <&gpmc>;
125 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
126 <1 IRQ_TYPE_NONE>; /* termcount */
127 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
128 #address-cells = <1>;
129 #size-cells = <1>;
130 ti,nand-ecc-opt = "bch8";
131 ti,elm-id = <&elm>;
132 nand-bus-width = <16>;
133 gpmc,device-width = <2>;
134 gpmc,sync-clk-ps = <0>;
135 gpmc,cs-on-ns = <0>;
136 gpmc,cs-rd-off-ns = <44>;
137 gpmc,cs-wr-off-ns = <44>;
138 gpmc,adv-on-ns = <6>;
139 gpmc,adv-rd-off-ns = <34>;
140 gpmc,adv-wr-off-ns = <44>;
141 gpmc,we-on-ns = <0>;
142 gpmc,we-off-ns = <40>;
143 gpmc,oe-on-ns = <0>;
144 gpmc,oe-off-ns = <54>;
145 gpmc,access-ns = <64>;
146 gpmc,rd-cycle-ns = <82>;
147 gpmc,wr-cycle-ns = <82>;
148 gpmc,bus-turnaround-ns = <0>;
149 gpmc,cycle2cycle-delay-ns = <0>;
150 gpmc,clk-activation-ns = <0>;
151 gpmc,wr-access-ns = <40>;
152 gpmc,wr-data-mux-bus-ns = <0>;
153 partition@0 {
154 label = "X-Loader";
155 reg = <0 0x80000>;
156 };
157 partition@80000 {
158 label = "U-Boot";
159 reg = <0x80000 0x1c0000>;
160 };
161 partition@1c0000 {
162 label = "Environment";
163 reg = <0x240000 0x40000>;
164 };
165 partition@280000 {
166 label = "Kernel";
167 reg = <0x280000 0x500000>;
168 };
169 partition@780000 {
170 label = "Filesystem";
171 reg = <0x780000 0xf880000>;
172 };
173 };
174};
175
176&mcspi1 {
177 pinctrl-names = "default";
178 pinctrl-0 = <&mcspi1_pins>;
179
180 flash@0 {
181 compatible = "w25x32";
182 spi-max-frequency = <48000000>;
183 reg = <0>;
184 #address-cells = <1>;
185 #size-cells = <1>;
186 };
187};
188
189&mmc1 {
190 pinctrl-names = "default";
191 pinctrl-0 = <&mmc_pins>;
192 vmmc-supply = <&vmmcsd_fixed>;
193 bus-width = <4>;
194 cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
195 wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
196};
197
198/* At least dm8168-evm rev c won't support multipoint, later may */
199&usb0 {
200 pinctrl-names = "default";
201 pinctrl-0 = <&usb0_pins>;
202 mentor,multipoint = <0>;
203};
204
205&usb1 {
206 pinctrl-names = "default";
207 pinctrl-0 = <&usb1_pins>;
208 mentor,multipoint = <0>;
209};
210
211&sata {
212 clocks = <&sysclk5_ck>, <&sata_refclk>;
213};
1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License version 2 as
4 * published by the Free Software Foundation.
5 */
6/dts-v1/;
7
8#include "dm816x.dtsi"
9#include <dt-bindings/interrupt-controller/irq.h>
10
11/ {
12 model = "DM8168 EVM";
13 compatible = "ti,dm8168-evm", "ti,dm8168";
14
15 memory {
16 device_type = "memory";
17 reg = <0x80000000 0x40000000 /* 1 GB */
18 0xc0000000 0x40000000>; /* 1 GB */
19 };
20
21 /* FDC6331L controlled by SD_POW pin */
22 vmmcsd_fixed: fixedregulator@0 {
23 compatible = "regulator-fixed";
24 regulator-name = "vmmcsd_fixed";
25 regulator-min-microvolt = <3300000>;
26 regulator-max-microvolt = <3300000>;
27 };
28};
29
30&dm816x_pinmux {
31 mcspi1_pins: pinmux_mcspi1_pins {
32 pinctrl-single,pins = <
33 DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
34 DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
35 DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
36 DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
37 >;
38 };
39
40 mmc_pins: pinmux_mmc_pins {
41 pinctrl-single,pins = <
42 DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
43 DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
44 DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
45 DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
46 DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
47 DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
48 DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
49 DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
50 DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
51 >;
52 };
53
54 usb0_pins: pinmux_usb0_pins {
55 pinctrl-single,pins = <
56 DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
57 >;
58 };
59
60 usb1_pins: pinmux_usb1_pins {
61 pinctrl-single,pins = <
62 DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
63 >;
64 };
65};
66
67&i2c1 {
68 extgpio0: pcf8575@20 {
69 compatible = "nxp,pcf8575";
70 reg = <0x20>;
71 gpio-controller;
72 #gpio-cells = <2>;
73 };
74};
75
76&i2c2 {
77 extgpio1: pcf8575@20 {
78 compatible = "nxp,pcf8575";
79 reg = <0x20>;
80 gpio-controller;
81 #gpio-cells = <2>;
82 };
83};
84
85&gpmc {
86 ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
87
88 nand@0,0 {
89 compatible = "ti,omap2-nand";
90 linux,mtd-name= "micron,mt29f2g16aadwp";
91 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
92 interrupt-parent = <&gpmc>;
93 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
94 <1 IRQ_TYPE_NONE>; /* termcount */
95 #address-cells = <1>;
96 #size-cells = <1>;
97 ti,nand-ecc-opt = "bch8";
98 nand-bus-width = <16>;
99 gpmc,device-width = <2>;
100 gpmc,sync-clk-ps = <0>;
101 gpmc,cs-on-ns = <0>;
102 gpmc,cs-rd-off-ns = <44>;
103 gpmc,cs-wr-off-ns = <44>;
104 gpmc,adv-on-ns = <6>;
105 gpmc,adv-rd-off-ns = <34>;
106 gpmc,adv-wr-off-ns = <44>;
107 gpmc,we-on-ns = <0>;
108 gpmc,we-off-ns = <40>;
109 gpmc,oe-on-ns = <0>;
110 gpmc,oe-off-ns = <54>;
111 gpmc,access-ns = <64>;
112 gpmc,rd-cycle-ns = <82>;
113 gpmc,wr-cycle-ns = <82>;
114 gpmc,bus-turnaround-ns = <0>;
115 gpmc,cycle2cycle-delay-ns = <0>;
116 gpmc,clk-activation-ns = <0>;
117 gpmc,wr-access-ns = <40>;
118 gpmc,wr-data-mux-bus-ns = <0>;
119 partition@0 {
120 label = "X-Loader";
121 reg = <0 0x80000>;
122 };
123 partition@0x80000 {
124 label = "U-Boot";
125 reg = <0x80000 0x1c0000>;
126 };
127 partition@0x1c0000 {
128 label = "Environment";
129 reg = <0x240000 0x40000>;
130 };
131 partition@0x280000 {
132 label = "Kernel";
133 reg = <0x280000 0x500000>;
134 };
135 partition@0x780000 {
136 label = "Filesystem";
137 reg = <0x780000 0xf880000>;
138 };
139 };
140};
141
142&mcspi1 {
143 pinctrl-names = "default";
144 pinctrl-0 = <&mcspi1_pins>;
145
146 m25p80@0 {
147 compatible = "w25x32";
148 spi-max-frequency = <48000000>;
149 reg = <0>;
150 #address-cells = <1>;
151 #size-cells = <1>;
152 };
153};
154
155&mmc1 {
156 pinctrl-names = "default";
157 pinctrl-0 = <&mmc_pins>;
158 vmmc-supply = <&vmmcsd_fixed>;
159 bus-width = <4>;
160 cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
161 wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
162};
163
164/* At least dm8168-evm rev c won't support multipoint, later may */
165&usb0 {
166 pinctrl-names = "default";
167 pinctrl-0 = <&usb0_pins>;
168 mentor,multipoint = <0>;
169};
170
171&usb1 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&usb1_pins>;
174 mentor,multipoint = <0>;
175};