1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
  4 */
  5
  6/dts-v1/;
  7
  8#include "bcm4709.dtsi"
  9
 10/ {
 11	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
 12	model = "TP-LINK Archer C9 V1";
 13
 14	chosen {
 15		bootargs = "console=ttyS0,115200 earlycon";
 16	};
 17
 18	memory@0 {
 19		device_type = "memory";
 20		reg = <0x00000000 0x08000000>;
 21	};
 22
 23	leds {
 24		compatible = "gpio-leds";
 25
 26		led-lan {
 27			label = "bcm53xx:blue:lan";
 28			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 29		};
 30
 31		led-wps {
 32			label = "bcm53xx:blue:wps";
 33			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 34		};
 35
 36		led-2ghz {
 37			label = "bcm53xx:blue:2ghz";
 38			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 39		};
 40
 41		led-5ghz {
 42			label = "bcm53xx:blue:5ghz";
 43			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 44		};
 45
 46		led-usb3 {
 47			label = "bcm53xx:blue:usb3";
 48			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 49			trigger-sources = <&ohci_port1>, <&ehci_port1>,
 50					  <&xhci_port1>;
 51			linux,default-trigger = "usbport";
 52		};
 53
 54		led-usb2 {
 55			label = "bcm53xx:blue:usb2";
 56			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 57			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 58			linux,default-trigger = "usbport";
 59		};
 60
 61		led-wan-blue {
 62			label = "bcm53xx:blue:wan";
 63			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 64		};
 65
 66		led-wan-amber {
 67			label = "bcm53xx:amber:wan";
 68			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 69		};
 70
 71		led-power {
 72			label = "bcm53xx:blue:power";
 73			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 74			linux,default-trigger = "default-on";
 75		};
 76	};
 77
 78	gpio-keys {
 79		compatible = "gpio-keys";
 80
 81		button-wps {
 82			label = "WPS";
 83			linux,code = <KEY_WPS_BUTTON>;
 84			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 85		};
 86
 87		button-restart {
 88			label = "Reset";
 89			linux,code = <KEY_RESTART>;
 90			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 91		};
 92	};
 93};
 94
 95&usb2 {
 96	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 97};
 98
 99&usb3 {
100	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
101};
102
103&spi_nor {
104	status = "okay";
105
106	partitions {
107		compatible = "tplink,safeloader-partitions";
108		partitions-table-offset = <0xe50000>;
109
110		partition-os-image {
111			compatible = "brcm,trx";
112		};
113
114		partition-file-system {
115			linux,rootfs;
116		};
117	};
118};
119
120&usb3_phy {
121	status = "okay";
122};