Loading...
Note: File does not exist in v4.6.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/*
7 * VScom OnRISC
8 * http://www.vscom.de
9 */
10
11/dts-v1/;
12
13#include "am335x-baltos.dtsi"
14#include "am335x-baltos-leds.dtsi"
15
16/ {
17 model = "OnRISC Baltos iR 3220";
18};
19
20&am33xx_pinmux {
21 tca6416_pins: pinmux_tca6416_pins {
22 pinctrl-single,pins = <
23 AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
24 >;
25 };
26
27 uart1_pins: pinmux_uart1_pins {
28 pinctrl-single,pins = <
29 AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
30 AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
31 AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
32 AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
33 AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
34 AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
35 AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
36 AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
37 >;
38 };
39
40 uart2_pins: pinmux_uart2_pins {
41 pinctrl-single,pins = <
42 AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
43 AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
44 AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
45 AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
46 AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
47 AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
48 AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
49 AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
50
51 AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
52 >;
53 };
54
55 mmc1_pins: pinmux_mmc1_pins {
56 pinctrl-single,pins = <
57 AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
58 >;
59 };
60};
61
62&uart1 {
63 pinctrl-names = "default";
64 pinctrl-0 = <&uart1_pins>;
65 dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
66 dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
67 dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
68 rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
69
70 status = "okay";
71};
72
73&uart2 {
74 pinctrl-names = "default";
75 pinctrl-0 = <&uart2_pins>;
76 dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
77 dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
78 dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
79 rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
80
81 status = "okay";
82};
83
84&i2c1 {
85 tca6416: gpio@20 {
86 compatible = "ti,tca6416";
87 reg = <0x20>;
88 gpio-controller;
89 #gpio-cells = <2>;
90 interrupt-parent = <&gpio0>;
91 interrupts = <20 IRQ_TYPE_EDGE_RISING>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&tca6416_pins>;
94 gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
95 "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
96 "ModeA0", "ModeA1", "ModeA2", "ModeA3",
97 "ModeB0", "ModeB1", "ModeB2", "ModeB3";
98 };
99};
100
101&usb0_phy {
102 status = "okay";
103};
104
105&usb0 {
106 status = "okay";
107 dr_mode = "host";
108};
109
110&cpsw_port1 {
111 phy-mode = "rmii";
112 ti,dual-emac-pvid = <1>;
113 fixed-link {
114 speed = <100>;
115 full-duplex;
116 };
117};
118
119&cpsw_port2 {
120 phy-mode = "rgmii-id";
121 ti,dual-emac-pvid = <2>;
122 phy-handle = <&phy1>;
123};
124
125&mmc1 {
126 pinctrl-names = "default";
127 pinctrl-0 = <&mmc1_pins>;
128 cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
129};
130
131&gpio0 {
132 gpio-line-names =
133 "MDIO",
134 "MDC",
135 "UART2_RX",
136 "UART2_TX",
137 "I2C1_SDA",
138 "I2C1_SCL",
139 "WLAN_BTN",
140 "W_DISABLE",
141 "NC",
142 "NC",
143 "NC",
144 "NC",
145 "UART1_CTSN",
146 "UART1_RTSN",
147 "UART1_RX",
148 "UART1_TX",
149 "onrisc:blue:wlan",
150 "onrisc:green:app",
151 "USB0_DRVVBUS",
152 "ETH2_INT",
153 "TCA6416_INT",
154 "RMII1_TXD1",
155 "MMC1_DAT0",
156 "MMC1_DAT1",
157 "NC",
158 "NC",
159 "MMC1_DAT2",
160 "MMC1_DAT3",
161 "RMII1_TXD0",
162 "NC",
163 "GPMC_WAIT0",
164 "GPMC_WP_N";
165};
166
167&gpio1 {
168 gpio-line-names =
169 "GPMC_AD0",
170 "GPMC_AD1",
171 "GPMC_AD2",
172 "GPMC_AD3",
173 "GPMC_AD4",
174 "GPMC_AD5",
175 "GPMC_AD6",
176 "GPMC_AD7",
177 "NC",
178 "NC",
179 "CONSOLE_RX",
180 "CONSOLE_TX",
181 "UART2_DTR",
182 "UART2_DSR",
183 "UART2_DCD",
184 "UART2_RI",
185 "RGMII2_TCTL",
186 "RGMII2_RCTL",
187 "RGMII2_TD3",
188 "RGMII2_TD2",
189 "RGMII2_TD1",
190 "RGMII2_TD0",
191 "RGMII2_TCLK",
192 "RGMII2_RCLK",
193 "RGMII2_RD3",
194 "RGMII2_RD2",
195 "RGMII2_RD1",
196 "RGMII2_RD0",
197 "PMIC_INT1",
198 "GPMC_CSN0_Flash",
199 "MMC1_CLK",
200 "MMC1_CMD";
201};
202
203&gpio2 {
204 gpio-line-names =
205 "GPMC_CSN3_BUS",
206 "GPMC_CLK",
207 "GPMC_ADVN_ALE",
208 "GPMC_OEN_RE_N",
209 "GPMC_WE_N",
210 "GPMC_BEN0_CLE",
211 "NC",
212 "NC",
213 "NC",
214 "NC",
215 "NC",
216 "NC",
217 "NC",
218 "NC",
219 "NC",
220 "NC",
221 "NC",
222 "NC",
223 "SD_CD",
224 "SD_WP",
225 "RMII1_RXD1",
226 "RMII1_RXD0",
227 "UART1_DTR",
228 "UART1_DSR",
229 "UART1_DCD",
230 "UART1_RI",
231 "MMC0_DAT3",
232 "MMC0_DAT2",
233 "MMC0_DAT1",
234 "MMC0_DAT0",
235 "MMC0_CLK",
236 "MMC0_CMD";
237};
238
239&gpio3 {
240 gpio-line-names =
241 "onrisc:red:power",
242 "RMII1_CRS_DV",
243 "RMII1_RXER",
244 "RMII1_TXEN",
245 "3G_PWR_EN",
246 "UART2_CTSN",
247 "UART2_RTSN",
248 "WLAN_IRQ",
249 "WLAN_EN",
250 "NC",
251 "NC",
252 "NC",
253 "NC",
254 "USB1_DRVVBUS",
255 "NC",
256 "NC",
257 "NC",
258 "NC",
259 "NC",
260 "NC",
261 "NC",
262 "NC",
263 "NC",
264 "NC",
265 "NC",
266 "NC",
267 "NC",
268 "NC",
269 "NC",
270 "NC",
271 "NC",
272 "NC";
273};