Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * This header file contains public constants and structures used by
4 * both the SCSI initiator and the SCSI target code.
5 *
6 * For documentation on the OPCODES, MESSAGES, and SENSE values,
7 * please consult the SCSI standard.
8 */
9
10#ifndef _SCSI_PROTO_H_
11#define _SCSI_PROTO_H_
12
13#include <linux/types.h>
14
15/*
16 * SCSI opcodes
17 */
18
19#define TEST_UNIT_READY 0x00
20#define REZERO_UNIT 0x01
21#define REQUEST_SENSE 0x03
22#define FORMAT_UNIT 0x04
23#define READ_BLOCK_LIMITS 0x05
24#define REASSIGN_BLOCKS 0x07
25#define INITIALIZE_ELEMENT_STATUS 0x07
26#define READ_6 0x08
27#define WRITE_6 0x0a
28#define SEEK_6 0x0b
29#define READ_REVERSE 0x0f
30#define WRITE_FILEMARKS 0x10
31#define SPACE 0x11
32#define INQUIRY 0x12
33#define RECOVER_BUFFERED_DATA 0x14
34#define MODE_SELECT 0x15
35#define RESERVE 0x16
36#define RELEASE 0x17
37#define COPY 0x18
38#define ERASE 0x19
39#define MODE_SENSE 0x1a
40#define START_STOP 0x1b
41#define RECEIVE_DIAGNOSTIC 0x1c
42#define SEND_DIAGNOSTIC 0x1d
43#define ALLOW_MEDIUM_REMOVAL 0x1e
44
45#define READ_FORMAT_CAPACITIES 0x23
46#define SET_WINDOW 0x24
47#define READ_CAPACITY 0x25
48#define READ_10 0x28
49#define WRITE_10 0x2a
50#define SEEK_10 0x2b
51#define POSITION_TO_ELEMENT 0x2b
52#define WRITE_VERIFY 0x2e
53#define VERIFY 0x2f
54#define SEARCH_HIGH 0x30
55#define SEARCH_EQUAL 0x31
56#define SEARCH_LOW 0x32
57#define SET_LIMITS 0x33
58#define PRE_FETCH 0x34
59#define READ_POSITION 0x34
60#define SYNCHRONIZE_CACHE 0x35
61#define LOCK_UNLOCK_CACHE 0x36
62#define READ_DEFECT_DATA 0x37
63#define MEDIUM_SCAN 0x38
64#define COMPARE 0x39
65#define COPY_VERIFY 0x3a
66#define WRITE_BUFFER 0x3b
67#define READ_BUFFER 0x3c
68#define UPDATE_BLOCK 0x3d
69#define READ_LONG 0x3e
70#define WRITE_LONG 0x3f
71#define CHANGE_DEFINITION 0x40
72#define WRITE_SAME 0x41
73#define UNMAP 0x42
74#define READ_TOC 0x43
75#define READ_HEADER 0x44
76#define GET_EVENT_STATUS_NOTIFICATION 0x4a
77#define LOG_SELECT 0x4c
78#define LOG_SENSE 0x4d
79#define XDWRITEREAD_10 0x53
80#define MODE_SELECT_10 0x55
81#define RESERVE_10 0x56
82#define RELEASE_10 0x57
83#define MODE_SENSE_10 0x5a
84#define PERSISTENT_RESERVE_IN 0x5e
85#define PERSISTENT_RESERVE_OUT 0x5f
86#define VARIABLE_LENGTH_CMD 0x7f
87#define REPORT_LUNS 0xa0
88#define SECURITY_PROTOCOL_IN 0xa2
89#define MAINTENANCE_IN 0xa3
90#define MAINTENANCE_OUT 0xa4
91#define MOVE_MEDIUM 0xa5
92#define EXCHANGE_MEDIUM 0xa6
93#define READ_12 0xa8
94#define SERVICE_ACTION_OUT_12 0xa9
95#define WRITE_12 0xaa
96#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
97#define SERVICE_ACTION_IN_12 0xab
98#define WRITE_VERIFY_12 0xae
99#define VERIFY_12 0xaf
100#define SEARCH_HIGH_12 0xb0
101#define SEARCH_EQUAL_12 0xb1
102#define SEARCH_LOW_12 0xb2
103#define SECURITY_PROTOCOL_OUT 0xb5
104#define READ_ELEMENT_STATUS 0xb8
105#define SEND_VOLUME_TAG 0xb6
106#define WRITE_LONG_2 0xea
107#define EXTENDED_COPY 0x83
108#define RECEIVE_COPY_RESULTS 0x84
109#define ACCESS_CONTROL_IN 0x86
110#define ACCESS_CONTROL_OUT 0x87
111#define READ_16 0x88
112#define COMPARE_AND_WRITE 0x89
113#define WRITE_16 0x8a
114#define READ_ATTRIBUTE 0x8c
115#define WRITE_ATTRIBUTE 0x8d
116#define WRITE_VERIFY_16 0x8e
117#define VERIFY_16 0x8f
118#define SYNCHRONIZE_CACHE_16 0x91
119#define WRITE_SAME_16 0x93
120#define ZBC_OUT 0x94
121#define ZBC_IN 0x95
122#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
123#define SERVICE_ACTION_IN_16 0x9e
124#define SERVICE_ACTION_OUT_16 0x9f
125/* values for service action in */
126#define SAI_READ_CAPACITY_16 0x10
127#define SAI_GET_LBA_STATUS 0x12
128#define SAI_REPORT_REFERRALS 0x13
129/* values for maintenance in */
130#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
131#define MI_REPORT_TARGET_PGS 0x0a
132#define MI_REPORT_ALIASES 0x0b
133#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
134#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
135#define MI_REPORT_PRIORITY 0x0e
136#define MI_REPORT_TIMESTAMP 0x0f
137#define MI_MANAGEMENT_PROTOCOL_IN 0x10
138/* value for MI_REPORT_TARGET_PGS ext header */
139#define MI_EXT_HDR_PARAM_FMT 0x20
140/* values for maintenance out */
141#define MO_SET_IDENTIFYING_INFORMATION 0x06
142#define MO_SET_TARGET_PGS 0x0a
143#define MO_CHANGE_ALIASES 0x0b
144#define MO_SET_PRIORITY 0x0e
145#define MO_SET_TIMESTAMP 0x0f
146#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
147/* values for ZBC_IN */
148#define ZI_REPORT_ZONES 0x00
149/* values for ZBC_OUT */
150#define ZO_CLOSE_ZONE 0x01
151#define ZO_FINISH_ZONE 0x02
152#define ZO_OPEN_ZONE 0x03
153#define ZO_RESET_WRITE_POINTER 0x04
154/* values for variable length command */
155#define XDREAD_32 0x03
156#define XDWRITE_32 0x04
157#define XPWRITE_32 0x06
158#define XDWRITEREAD_32 0x07
159#define READ_32 0x09
160#define VERIFY_32 0x0a
161#define WRITE_32 0x0b
162#define WRITE_VERIFY_32 0x0c
163#define WRITE_SAME_32 0x0d
164#define ATA_32 0x1ff0
165
166/* Values for T10/04-262r7 */
167#define ATA_16 0x85 /* 16-byte pass-thru */
168#define ATA_12 0xa1 /* 12-byte pass-thru */
169
170/* Vendor specific CDBs start here */
171#define VENDOR_SPECIFIC_CDB 0xc0
172
173/*
174 * SCSI command lengths
175 */
176
177#define SCSI_MAX_VARLEN_CDB_SIZE 260
178
179/* defined in T10 SCSI Primary Commands-2 (SPC2) */
180struct scsi_varlen_cdb_hdr {
181 __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
182 __u8 control;
183 __u8 misc[5];
184 __u8 additional_cdb_length; /* total cdb length - 8 */
185 __be16 service_action;
186 /* service specific data follows */
187};
188
189/*
190 * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
191 * T10/1561-D Revision 4 Draft dated 7th November 2002.
192 */
193enum sam_status {
194 SAM_STAT_GOOD = 0x00,
195 SAM_STAT_CHECK_CONDITION = 0x02,
196 SAM_STAT_CONDITION_MET = 0x04,
197 SAM_STAT_BUSY = 0x08,
198 SAM_STAT_INTERMEDIATE = 0x10,
199 SAM_STAT_INTERMEDIATE_CONDITION_MET = 0x14,
200 SAM_STAT_RESERVATION_CONFLICT = 0x18,
201 SAM_STAT_COMMAND_TERMINATED = 0x22, /* obsolete in SAM-3 */
202 SAM_STAT_TASK_SET_FULL = 0x28,
203 SAM_STAT_ACA_ACTIVE = 0x30,
204 SAM_STAT_TASK_ABORTED = 0x40,
205};
206
207#define STATUS_MASK 0xfe
208
209/*
210 * SENSE KEYS
211 */
212#define NO_SENSE 0x00
213#define RECOVERED_ERROR 0x01
214#define NOT_READY 0x02
215#define MEDIUM_ERROR 0x03
216#define HARDWARE_ERROR 0x04
217#define ILLEGAL_REQUEST 0x05
218#define UNIT_ATTENTION 0x06
219#define DATA_PROTECT 0x07
220#define BLANK_CHECK 0x08
221#define VENDOR_SPECIFIC 0x09
222#define COPY_ABORTED 0x0a
223#define ABORTED_COMMAND 0x0b
224#define VOLUME_OVERFLOW 0x0d
225#define MISCOMPARE 0x0e
226#define COMPLETED 0x0f
227
228/*
229 * DEVICE TYPES
230 * Please keep them in 0x%02x format for $MODALIAS to work
231 */
232
233#define TYPE_DISK 0x00
234#define TYPE_TAPE 0x01
235#define TYPE_PRINTER 0x02
236#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
237#define TYPE_WORM 0x04 /* Treated as ROM by our system */
238#define TYPE_ROM 0x05
239#define TYPE_SCANNER 0x06
240#define TYPE_MOD 0x07 /* Magneto-optical disk -
241 * - treated as TYPE_DISK */
242#define TYPE_MEDIUM_CHANGER 0x08
243#define TYPE_COMM 0x09 /* Communications device */
244#define TYPE_RAID 0x0c
245#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
246#define TYPE_RBC 0x0e
247#define TYPE_OSD 0x11
248#define TYPE_ZBC 0x14
249#define TYPE_WLUN 0x1e /* well-known logical unit */
250#define TYPE_NO_LUN 0x7f
251
252/* SCSI protocols; these are taken from SPC-3 section 7.5 */
253enum scsi_protocol {
254 SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
255 SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
256 SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
257 SCSI_PROTOCOL_SBP = 3, /* firewire */
258 SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
259 SCSI_PROTOCOL_ISCSI = 5,
260 SCSI_PROTOCOL_SAS = 6,
261 SCSI_PROTOCOL_ADT = 7, /* Media Changers */
262 SCSI_PROTOCOL_ATA = 8,
263 SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
264};
265
266/*
267 * ScsiLun: 8 byte LUN.
268 */
269struct scsi_lun {
270 __u8 scsi_lun[8];
271};
272
273/* SPC asymmetric access states */
274#define SCSI_ACCESS_STATE_OPTIMAL 0x00
275#define SCSI_ACCESS_STATE_ACTIVE 0x01
276#define SCSI_ACCESS_STATE_STANDBY 0x02
277#define SCSI_ACCESS_STATE_UNAVAILABLE 0x03
278#define SCSI_ACCESS_STATE_LBA 0x04
279#define SCSI_ACCESS_STATE_OFFLINE 0x0e
280#define SCSI_ACCESS_STATE_TRANSITIONING 0x0f
281
282/* Values for REPORT TARGET GROUP STATES */
283#define SCSI_ACCESS_STATE_MASK 0x0f
284#define SCSI_ACCESS_STATE_PREFERRED 0x80
285
286/* Reporting options for REPORT ZONES */
287enum zbc_zone_reporting_options {
288 ZBC_ZONE_REPORTING_OPTION_ALL = 0x00,
289 ZBC_ZONE_REPORTING_OPTION_EMPTY = 0x01,
290 ZBC_ZONE_REPORTING_OPTION_IMPLICIT_OPEN = 0x02,
291 ZBC_ZONE_REPORTING_OPTION_EXPLICIT_OPEN = 0x03,
292 ZBC_ZONE_REPORTING_OPTION_CLOSED = 0x04,
293 ZBC_ZONE_REPORTING_OPTION_FULL = 0x05,
294 ZBC_ZONE_REPORTING_OPTION_READONLY = 0x06,
295 ZBC_ZONE_REPORTING_OPTION_OFFLINE = 0x07,
296 /* 0x08 to 0x0f are reserved */
297 ZBC_ZONE_REPORTING_OPTION_NEED_RESET_WP = 0x10,
298 ZBC_ZONE_REPORTING_OPTION_NON_SEQWRITE = 0x11,
299 /* 0x12 to 0x3e are reserved */
300 ZBC_ZONE_REPORTING_OPTION_NON_WP = 0x3f,
301};
302
303#define ZBC_REPORT_ZONE_PARTIAL 0x80
304
305/* Zone types of REPORT ZONES zone descriptors */
306enum zbc_zone_type {
307 ZBC_ZONE_TYPE_CONV = 0x1,
308 ZBC_ZONE_TYPE_SEQWRITE_REQ = 0x2,
309 ZBC_ZONE_TYPE_SEQWRITE_PREF = 0x3,
310 ZBC_ZONE_TYPE_SEQ_OR_BEFORE_REQ = 0x4,
311 ZBC_ZONE_TYPE_GAP = 0x5,
312 /* 0x6 to 0xf are reserved */
313};
314
315/* Zone conditions of REPORT ZONES zone descriptors */
316enum zbc_zone_cond {
317 ZBC_ZONE_COND_NO_WP = 0x0,
318 ZBC_ZONE_COND_EMPTY = 0x1,
319 ZBC_ZONE_COND_IMP_OPEN = 0x2,
320 ZBC_ZONE_COND_EXP_OPEN = 0x3,
321 ZBC_ZONE_COND_CLOSED = 0x4,
322 /* 0x5 to 0xc are reserved */
323 ZBC_ZONE_COND_READONLY = 0xd,
324 ZBC_ZONE_COND_FULL = 0xe,
325 ZBC_ZONE_COND_OFFLINE = 0xf,
326};
327
328enum zbc_zone_alignment_method {
329 ZBC_CONSTANT_ZONE_LENGTH = 0x1,
330 ZBC_CONSTANT_ZONE_START_OFFSET = 0x8,
331};
332
333/* Version descriptor values for INQUIRY */
334enum scsi_version_descriptor {
335 SCSI_VERSION_DESCRIPTOR_FCP4 = 0x0a40,
336 SCSI_VERSION_DESCRIPTOR_ISCSI = 0x0960,
337 SCSI_VERSION_DESCRIPTOR_SAM5 = 0x00a0,
338 SCSI_VERSION_DESCRIPTOR_SAS3 = 0x0c60,
339 SCSI_VERSION_DESCRIPTOR_SBC3 = 0x04c0,
340 SCSI_VERSION_DESCRIPTOR_SBP3 = 0x0980,
341 SCSI_VERSION_DESCRIPTOR_SPC4 = 0x0460,
342 SCSI_VERSION_DESCRIPTOR_SRP = 0x0940
343};
344
345enum scsi_support_opcode {
346 SCSI_SUPPORT_NO_INFO = 0,
347 SCSI_SUPPORT_NOT_SUPPORTED = 1,
348 SCSI_SUPPORT_FULL = 3,
349 SCSI_SUPPORT_VENDOR = 5,
350};
351
352#define SCSI_CONTROL_MASK 0
353#define SCSI_GROUP_NUMBER_MASK 0
354
355#endif /* _SCSI_PROTO_H_ */
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * This header file contains public constants and structures used by
4 * both the SCSI initiator and the SCSI target code.
5 *
6 * For documentation on the OPCODES, MESSAGES, and SENSE values,
7 * please consult the SCSI standard.
8 */
9
10#ifndef _SCSI_PROTO_H_
11#define _SCSI_PROTO_H_
12
13#include <linux/types.h>
14
15/*
16 * SCSI opcodes
17 */
18
19#define TEST_UNIT_READY 0x00
20#define REZERO_UNIT 0x01
21#define REQUEST_SENSE 0x03
22#define FORMAT_UNIT 0x04
23#define READ_BLOCK_LIMITS 0x05
24#define REASSIGN_BLOCKS 0x07
25#define INITIALIZE_ELEMENT_STATUS 0x07
26#define READ_6 0x08
27#define WRITE_6 0x0a
28#define SEEK_6 0x0b
29#define READ_REVERSE 0x0f
30#define WRITE_FILEMARKS 0x10
31#define SPACE 0x11
32#define INQUIRY 0x12
33#define RECOVER_BUFFERED_DATA 0x14
34#define MODE_SELECT 0x15
35#define RESERVE 0x16
36#define RELEASE 0x17
37#define COPY 0x18
38#define ERASE 0x19
39#define MODE_SENSE 0x1a
40#define START_STOP 0x1b
41#define RECEIVE_DIAGNOSTIC 0x1c
42#define SEND_DIAGNOSTIC 0x1d
43#define ALLOW_MEDIUM_REMOVAL 0x1e
44
45#define READ_FORMAT_CAPACITIES 0x23
46#define SET_WINDOW 0x24
47#define READ_CAPACITY 0x25
48#define READ_10 0x28
49#define WRITE_10 0x2a
50#define SEEK_10 0x2b
51#define POSITION_TO_ELEMENT 0x2b
52#define WRITE_VERIFY 0x2e
53#define VERIFY 0x2f
54#define SEARCH_HIGH 0x30
55#define SEARCH_EQUAL 0x31
56#define SEARCH_LOW 0x32
57#define SET_LIMITS 0x33
58#define PRE_FETCH 0x34
59#define READ_POSITION 0x34
60#define SYNCHRONIZE_CACHE 0x35
61#define LOCK_UNLOCK_CACHE 0x36
62#define READ_DEFECT_DATA 0x37
63#define MEDIUM_SCAN 0x38
64#define COMPARE 0x39
65#define COPY_VERIFY 0x3a
66#define WRITE_BUFFER 0x3b
67#define READ_BUFFER 0x3c
68#define UPDATE_BLOCK 0x3d
69#define READ_LONG 0x3e
70#define WRITE_LONG 0x3f
71#define CHANGE_DEFINITION 0x40
72#define WRITE_SAME 0x41
73#define UNMAP 0x42
74#define READ_TOC 0x43
75#define READ_HEADER 0x44
76#define GET_EVENT_STATUS_NOTIFICATION 0x4a
77#define LOG_SELECT 0x4c
78#define LOG_SENSE 0x4d
79#define XDWRITEREAD_10 0x53
80#define MODE_SELECT_10 0x55
81#define RESERVE_10 0x56
82#define RELEASE_10 0x57
83#define MODE_SENSE_10 0x5a
84#define PERSISTENT_RESERVE_IN 0x5e
85#define PERSISTENT_RESERVE_OUT 0x5f
86#define VARIABLE_LENGTH_CMD 0x7f
87#define REPORT_LUNS 0xa0
88#define SECURITY_PROTOCOL_IN 0xa2
89#define MAINTENANCE_IN 0xa3
90#define MAINTENANCE_OUT 0xa4
91#define MOVE_MEDIUM 0xa5
92#define EXCHANGE_MEDIUM 0xa6
93#define READ_12 0xa8
94#define SERVICE_ACTION_OUT_12 0xa9
95#define WRITE_12 0xaa
96#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
97#define SERVICE_ACTION_IN_12 0xab
98#define WRITE_VERIFY_12 0xae
99#define VERIFY_12 0xaf
100#define SEARCH_HIGH_12 0xb0
101#define SEARCH_EQUAL_12 0xb1
102#define SEARCH_LOW_12 0xb2
103#define SECURITY_PROTOCOL_OUT 0xb5
104#define READ_ELEMENT_STATUS 0xb8
105#define SEND_VOLUME_TAG 0xb6
106#define WRITE_LONG_2 0xea
107#define EXTENDED_COPY 0x83
108#define RECEIVE_COPY_RESULTS 0x84
109#define ACCESS_CONTROL_IN 0x86
110#define ACCESS_CONTROL_OUT 0x87
111#define READ_16 0x88
112#define COMPARE_AND_WRITE 0x89
113#define WRITE_16 0x8a
114#define READ_ATTRIBUTE 0x8c
115#define WRITE_ATTRIBUTE 0x8d
116#define WRITE_VERIFY_16 0x8e
117#define VERIFY_16 0x8f
118#define SYNCHRONIZE_CACHE_16 0x91
119#define WRITE_SAME_16 0x93
120#define ZBC_OUT 0x94
121#define ZBC_IN 0x95
122#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
123#define SERVICE_ACTION_IN_16 0x9e
124#define SERVICE_ACTION_OUT_16 0x9f
125/* values for service action in */
126#define SAI_READ_CAPACITY_16 0x10
127#define SAI_GET_LBA_STATUS 0x12
128#define SAI_REPORT_REFERRALS 0x13
129/* values for maintenance in */
130#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
131#define MI_REPORT_TARGET_PGS 0x0a
132#define MI_REPORT_ALIASES 0x0b
133#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
134#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
135#define MI_REPORT_PRIORITY 0x0e
136#define MI_REPORT_TIMESTAMP 0x0f
137#define MI_MANAGEMENT_PROTOCOL_IN 0x10
138/* value for MI_REPORT_TARGET_PGS ext header */
139#define MI_EXT_HDR_PARAM_FMT 0x20
140/* values for maintenance out */
141#define MO_SET_IDENTIFYING_INFORMATION 0x06
142#define MO_SET_TARGET_PGS 0x0a
143#define MO_CHANGE_ALIASES 0x0b
144#define MO_SET_PRIORITY 0x0e
145#define MO_SET_TIMESTAMP 0x0f
146#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
147/* values for ZBC_IN */
148#define ZI_REPORT_ZONES 0x00
149/* values for ZBC_OUT */
150#define ZO_CLOSE_ZONE 0x01
151#define ZO_FINISH_ZONE 0x02
152#define ZO_OPEN_ZONE 0x03
153#define ZO_RESET_WRITE_POINTER 0x04
154/* values for variable length command */
155#define XDREAD_32 0x03
156#define XDWRITE_32 0x04
157#define XPWRITE_32 0x06
158#define XDWRITEREAD_32 0x07
159#define READ_32 0x09
160#define VERIFY_32 0x0a
161#define WRITE_32 0x0b
162#define WRITE_VERIFY_32 0x0c
163#define WRITE_SAME_32 0x0d
164#define ATA_32 0x1ff0
165
166/* Values for T10/04-262r7 */
167#define ATA_16 0x85 /* 16-byte pass-thru */
168#define ATA_12 0xa1 /* 12-byte pass-thru */
169
170/* Vendor specific CDBs start here */
171#define VENDOR_SPECIFIC_CDB 0xc0
172
173/*
174 * SCSI command lengths
175 */
176
177#define SCSI_MAX_VARLEN_CDB_SIZE 260
178
179/* defined in T10 SCSI Primary Commands-2 (SPC2) */
180struct scsi_varlen_cdb_hdr {
181 __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
182 __u8 control;
183 __u8 misc[5];
184 __u8 additional_cdb_length; /* total cdb length - 8 */
185 __be16 service_action;
186 /* service specific data follows */
187};
188
189/*
190 * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
191 * T10/1561-D Revision 4 Draft dated 7th November 2002.
192 */
193#define SAM_STAT_GOOD 0x00
194#define SAM_STAT_CHECK_CONDITION 0x02
195#define SAM_STAT_CONDITION_MET 0x04
196#define SAM_STAT_BUSY 0x08
197#define SAM_STAT_INTERMEDIATE 0x10
198#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
199#define SAM_STAT_RESERVATION_CONFLICT 0x18
200#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
201#define SAM_STAT_TASK_SET_FULL 0x28
202#define SAM_STAT_ACA_ACTIVE 0x30
203#define SAM_STAT_TASK_ABORTED 0x40
204
205/*
206 * Status codes. These are deprecated as they are shifted 1 bit right
207 * from those found in the SCSI standards. This causes confusion for
208 * applications that are ported to several OSes. Prefer SAM Status codes
209 * above.
210 */
211
212#define GOOD 0x00
213#define CHECK_CONDITION 0x01
214#define CONDITION_GOOD 0x02
215#define BUSY 0x04
216#define INTERMEDIATE_GOOD 0x08
217#define INTERMEDIATE_C_GOOD 0x0a
218#define RESERVATION_CONFLICT 0x0c
219#define COMMAND_TERMINATED 0x11
220#define QUEUE_FULL 0x14
221#define ACA_ACTIVE 0x18
222#define TASK_ABORTED 0x20
223
224#define STATUS_MASK 0xfe
225
226/*
227 * SENSE KEYS
228 */
229
230#define NO_SENSE 0x00
231#define RECOVERED_ERROR 0x01
232#define NOT_READY 0x02
233#define MEDIUM_ERROR 0x03
234#define HARDWARE_ERROR 0x04
235#define ILLEGAL_REQUEST 0x05
236#define UNIT_ATTENTION 0x06
237#define DATA_PROTECT 0x07
238#define BLANK_CHECK 0x08
239#define VENDOR_SPECIFIC 0x09
240#define COPY_ABORTED 0x0a
241#define ABORTED_COMMAND 0x0b
242#define VOLUME_OVERFLOW 0x0d
243#define MISCOMPARE 0x0e
244
245
246/*
247 * DEVICE TYPES
248 * Please keep them in 0x%02x format for $MODALIAS to work
249 */
250
251#define TYPE_DISK 0x00
252#define TYPE_TAPE 0x01
253#define TYPE_PRINTER 0x02
254#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
255#define TYPE_WORM 0x04 /* Treated as ROM by our system */
256#define TYPE_ROM 0x05
257#define TYPE_SCANNER 0x06
258#define TYPE_MOD 0x07 /* Magneto-optical disk -
259 * - treated as TYPE_DISK */
260#define TYPE_MEDIUM_CHANGER 0x08
261#define TYPE_COMM 0x09 /* Communications device */
262#define TYPE_RAID 0x0c
263#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
264#define TYPE_RBC 0x0e
265#define TYPE_OSD 0x11
266#define TYPE_ZBC 0x14
267#define TYPE_WLUN 0x1e /* well-known logical unit */
268#define TYPE_NO_LUN 0x7f
269
270/* SCSI protocols; these are taken from SPC-3 section 7.5 */
271enum scsi_protocol {
272 SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
273 SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
274 SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
275 SCSI_PROTOCOL_SBP = 3, /* firewire */
276 SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
277 SCSI_PROTOCOL_ISCSI = 5,
278 SCSI_PROTOCOL_SAS = 6,
279 SCSI_PROTOCOL_ADT = 7, /* Media Changers */
280 SCSI_PROTOCOL_ATA = 8,
281 SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
282};
283
284/*
285 * ScsiLun: 8 byte LUN.
286 */
287struct scsi_lun {
288 __u8 scsi_lun[8];
289};
290
291/* SPC asymmetric access states */
292#define SCSI_ACCESS_STATE_OPTIMAL 0x00
293#define SCSI_ACCESS_STATE_ACTIVE 0x01
294#define SCSI_ACCESS_STATE_STANDBY 0x02
295#define SCSI_ACCESS_STATE_UNAVAILABLE 0x03
296#define SCSI_ACCESS_STATE_LBA 0x04
297#define SCSI_ACCESS_STATE_OFFLINE 0x0e
298#define SCSI_ACCESS_STATE_TRANSITIONING 0x0f
299
300/* Values for REPORT TARGET GROUP STATES */
301#define SCSI_ACCESS_STATE_MASK 0x0f
302#define SCSI_ACCESS_STATE_PREFERRED 0x80
303
304/* Reporting options for REPORT ZONES */
305enum zbc_zone_reporting_options {
306 ZBC_ZONE_REPORTING_OPTION_ALL = 0x00,
307 ZBC_ZONE_REPORTING_OPTION_EMPTY = 0x01,
308 ZBC_ZONE_REPORTING_OPTION_IMPLICIT_OPEN = 0x02,
309 ZBC_ZONE_REPORTING_OPTION_EXPLICIT_OPEN = 0x03,
310 ZBC_ZONE_REPORTING_OPTION_CLOSED = 0x04,
311 ZBC_ZONE_REPORTING_OPTION_FULL = 0x05,
312 ZBC_ZONE_REPORTING_OPTION_READONLY = 0x06,
313 ZBC_ZONE_REPORTING_OPTION_OFFLINE = 0x07,
314 /* 0x08 to 0x0f are reserved */
315 ZBC_ZONE_REPORTING_OPTION_NEED_RESET_WP = 0x10,
316 ZBC_ZONE_REPORTING_OPTION_NON_SEQWRITE = 0x11,
317 /* 0x12 to 0x3e are reserved */
318 ZBC_ZONE_REPORTING_OPTION_NON_WP = 0x3f,
319};
320
321#define ZBC_REPORT_ZONE_PARTIAL 0x80
322
323/* Zone types of REPORT ZONES zone descriptors */
324enum zbc_zone_type {
325 ZBC_ZONE_TYPE_CONV = 0x1,
326 ZBC_ZONE_TYPE_SEQWRITE_REQ = 0x2,
327 ZBC_ZONE_TYPE_SEQWRITE_PREF = 0x3,
328 /* 0x4 to 0xf are reserved */
329};
330
331/* Zone conditions of REPORT ZONES zone descriptors */
332enum zbc_zone_cond {
333 ZBC_ZONE_COND_NO_WP = 0x0,
334 ZBC_ZONE_COND_EMPTY = 0x1,
335 ZBC_ZONE_COND_IMP_OPEN = 0x2,
336 ZBC_ZONE_COND_EXP_OPEN = 0x3,
337 ZBC_ZONE_COND_CLOSED = 0x4,
338 /* 0x5 to 0xc are reserved */
339 ZBC_ZONE_COND_READONLY = 0xd,
340 ZBC_ZONE_COND_FULL = 0xe,
341 ZBC_ZONE_COND_OFFLINE = 0xf,
342};
343
344#endif /* _SCSI_PROTO_H_ */