Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright Linus Torvalds 1999
4 * (C) Copyright Johannes Erdfelt 1999-2001
5 * (C) Copyright Andreas Gal 1999
6 * (C) Copyright Gregory P. Smith 1999
7 * (C) Copyright Deti Fliegl 1999
8 * (C) Copyright Randy Dunlap 2000
9 * (C) Copyright David Brownell 2000-2002
10 */
11
12#include <linux/bcd.h>
13#include <linux/module.h>
14#include <linux/version.h>
15#include <linux/kernel.h>
16#include <linux/sched/task_stack.h>
17#include <linux/slab.h>
18#include <linux/completion.h>
19#include <linux/utsname.h>
20#include <linux/mm.h>
21#include <asm/io.h>
22#include <linux/device.h>
23#include <linux/dma-mapping.h>
24#include <linux/mutex.h>
25#include <asm/irq.h>
26#include <asm/byteorder.h>
27#include <asm/unaligned.h>
28#include <linux/platform_device.h>
29#include <linux/workqueue.h>
30#include <linux/pm_runtime.h>
31#include <linux/types.h>
32#include <linux/genalloc.h>
33#include <linux/io.h>
34#include <linux/kcov.h>
35
36#include <linux/phy/phy.h>
37#include <linux/usb.h>
38#include <linux/usb/hcd.h>
39#include <linux/usb/otg.h>
40
41#include "usb.h"
42#include "phy.h"
43
44
45/*-------------------------------------------------------------------------*/
46
47/*
48 * USB Host Controller Driver framework
49 *
50 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
51 * HCD-specific behaviors/bugs.
52 *
53 * This does error checks, tracks devices and urbs, and delegates to a
54 * "hc_driver" only for code (and data) that really needs to know about
55 * hardware differences. That includes root hub registers, i/o queues,
56 * and so on ... but as little else as possible.
57 *
58 * Shared code includes most of the "root hub" code (these are emulated,
59 * though each HC's hardware works differently) and PCI glue, plus request
60 * tracking overhead. The HCD code should only block on spinlocks or on
61 * hardware handshaking; blocking on software events (such as other kernel
62 * threads releasing resources, or completing actions) is all generic.
63 *
64 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
65 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
66 * only by the hub driver ... and that neither should be seen or used by
67 * usb client device drivers.
68 *
69 * Contributors of ideas or unattributed patches include: David Brownell,
70 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
71 *
72 * HISTORY:
73 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
74 * associated cleanup. "usb_hcd" still != "usb_bus".
75 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
76 */
77
78/*-------------------------------------------------------------------------*/
79
80/* Keep track of which host controller drivers are loaded */
81unsigned long usb_hcds_loaded;
82EXPORT_SYMBOL_GPL(usb_hcds_loaded);
83
84/* host controllers we manage */
85DEFINE_IDR (usb_bus_idr);
86EXPORT_SYMBOL_GPL (usb_bus_idr);
87
88/* used when allocating bus numbers */
89#define USB_MAXBUS 64
90
91/* used when updating list of hcds */
92DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
93EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
94
95/* used for controlling access to virtual root hubs */
96static DEFINE_SPINLOCK(hcd_root_hub_lock);
97
98/* used when updating an endpoint's URB list */
99static DEFINE_SPINLOCK(hcd_urb_list_lock);
100
101/* used to protect against unlinking URBs after the device is gone */
102static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
103
104/* wait queue for synchronous unlinks */
105DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
106
107/*-------------------------------------------------------------------------*/
108
109/*
110 * Sharable chunks of root hub code.
111 */
112
113/*-------------------------------------------------------------------------*/
114#define KERNEL_REL bin2bcd(LINUX_VERSION_MAJOR)
115#define KERNEL_VER bin2bcd(LINUX_VERSION_PATCHLEVEL)
116
117/* usb 3.1 root hub device descriptor */
118static const u8 usb31_rh_dev_descriptor[18] = {
119 0x12, /* __u8 bLength; */
120 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
121 0x10, 0x03, /* __le16 bcdUSB; v3.1 */
122
123 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
124 0x00, /* __u8 bDeviceSubClass; */
125 0x03, /* __u8 bDeviceProtocol; USB 3 hub */
126 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
127
128 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
129 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
130 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
131
132 0x03, /* __u8 iManufacturer; */
133 0x02, /* __u8 iProduct; */
134 0x01, /* __u8 iSerialNumber; */
135 0x01 /* __u8 bNumConfigurations; */
136};
137
138/* usb 3.0 root hub device descriptor */
139static const u8 usb3_rh_dev_descriptor[18] = {
140 0x12, /* __u8 bLength; */
141 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
142 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
143
144 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
145 0x00, /* __u8 bDeviceSubClass; */
146 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
147 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
148
149 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
150 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
151 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
152
153 0x03, /* __u8 iManufacturer; */
154 0x02, /* __u8 iProduct; */
155 0x01, /* __u8 iSerialNumber; */
156 0x01 /* __u8 bNumConfigurations; */
157};
158
159/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
160static const u8 usb25_rh_dev_descriptor[18] = {
161 0x12, /* __u8 bLength; */
162 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
163 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
164
165 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
166 0x00, /* __u8 bDeviceSubClass; */
167 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
168 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
169
170 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
171 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
172 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
173
174 0x03, /* __u8 iManufacturer; */
175 0x02, /* __u8 iProduct; */
176 0x01, /* __u8 iSerialNumber; */
177 0x01 /* __u8 bNumConfigurations; */
178};
179
180/* usb 2.0 root hub device descriptor */
181static const u8 usb2_rh_dev_descriptor[18] = {
182 0x12, /* __u8 bLength; */
183 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
184 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
185
186 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
187 0x00, /* __u8 bDeviceSubClass; */
188 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
189 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
190
191 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
192 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
193 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
194
195 0x03, /* __u8 iManufacturer; */
196 0x02, /* __u8 iProduct; */
197 0x01, /* __u8 iSerialNumber; */
198 0x01 /* __u8 bNumConfigurations; */
199};
200
201/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
202
203/* usb 1.1 root hub device descriptor */
204static const u8 usb11_rh_dev_descriptor[18] = {
205 0x12, /* __u8 bLength; */
206 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
207 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
208
209 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
210 0x00, /* __u8 bDeviceSubClass; */
211 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
212 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
213
214 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
215 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
216 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
217
218 0x03, /* __u8 iManufacturer; */
219 0x02, /* __u8 iProduct; */
220 0x01, /* __u8 iSerialNumber; */
221 0x01 /* __u8 bNumConfigurations; */
222};
223
224
225/*-------------------------------------------------------------------------*/
226
227/* Configuration descriptors for our root hubs */
228
229static const u8 fs_rh_config_descriptor[] = {
230
231 /* one configuration */
232 0x09, /* __u8 bLength; */
233 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
234 0x19, 0x00, /* __le16 wTotalLength; */
235 0x01, /* __u8 bNumInterfaces; (1) */
236 0x01, /* __u8 bConfigurationValue; */
237 0x00, /* __u8 iConfiguration; */
238 0xc0, /* __u8 bmAttributes;
239 Bit 7: must be set,
240 6: Self-powered,
241 5: Remote wakeup,
242 4..0: resvd */
243 0x00, /* __u8 MaxPower; */
244
245 /* USB 1.1:
246 * USB 2.0, single TT organization (mandatory):
247 * one interface, protocol 0
248 *
249 * USB 2.0, multiple TT organization (optional):
250 * two interfaces, protocols 1 (like single TT)
251 * and 2 (multiple TT mode) ... config is
252 * sometimes settable
253 * NOT IMPLEMENTED
254 */
255
256 /* one interface */
257 0x09, /* __u8 if_bLength; */
258 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
259 0x00, /* __u8 if_bInterfaceNumber; */
260 0x00, /* __u8 if_bAlternateSetting; */
261 0x01, /* __u8 if_bNumEndpoints; */
262 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
263 0x00, /* __u8 if_bInterfaceSubClass; */
264 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
265 0x00, /* __u8 if_iInterface; */
266
267 /* one endpoint (status change endpoint) */
268 0x07, /* __u8 ep_bLength; */
269 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
270 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
271 0x03, /* __u8 ep_bmAttributes; Interrupt */
272 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
273 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
274};
275
276static const u8 hs_rh_config_descriptor[] = {
277
278 /* one configuration */
279 0x09, /* __u8 bLength; */
280 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
281 0x19, 0x00, /* __le16 wTotalLength; */
282 0x01, /* __u8 bNumInterfaces; (1) */
283 0x01, /* __u8 bConfigurationValue; */
284 0x00, /* __u8 iConfiguration; */
285 0xc0, /* __u8 bmAttributes;
286 Bit 7: must be set,
287 6: Self-powered,
288 5: Remote wakeup,
289 4..0: resvd */
290 0x00, /* __u8 MaxPower; */
291
292 /* USB 1.1:
293 * USB 2.0, single TT organization (mandatory):
294 * one interface, protocol 0
295 *
296 * USB 2.0, multiple TT organization (optional):
297 * two interfaces, protocols 1 (like single TT)
298 * and 2 (multiple TT mode) ... config is
299 * sometimes settable
300 * NOT IMPLEMENTED
301 */
302
303 /* one interface */
304 0x09, /* __u8 if_bLength; */
305 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
306 0x00, /* __u8 if_bInterfaceNumber; */
307 0x00, /* __u8 if_bAlternateSetting; */
308 0x01, /* __u8 if_bNumEndpoints; */
309 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
310 0x00, /* __u8 if_bInterfaceSubClass; */
311 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
312 0x00, /* __u8 if_iInterface; */
313
314 /* one endpoint (status change endpoint) */
315 0x07, /* __u8 ep_bLength; */
316 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
317 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
318 0x03, /* __u8 ep_bmAttributes; Interrupt */
319 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
320 * see hub.c:hub_configure() for details. */
321 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
322 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
323};
324
325static const u8 ss_rh_config_descriptor[] = {
326 /* one configuration */
327 0x09, /* __u8 bLength; */
328 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
329 0x1f, 0x00, /* __le16 wTotalLength; */
330 0x01, /* __u8 bNumInterfaces; (1) */
331 0x01, /* __u8 bConfigurationValue; */
332 0x00, /* __u8 iConfiguration; */
333 0xc0, /* __u8 bmAttributes;
334 Bit 7: must be set,
335 6: Self-powered,
336 5: Remote wakeup,
337 4..0: resvd */
338 0x00, /* __u8 MaxPower; */
339
340 /* one interface */
341 0x09, /* __u8 if_bLength; */
342 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
343 0x00, /* __u8 if_bInterfaceNumber; */
344 0x00, /* __u8 if_bAlternateSetting; */
345 0x01, /* __u8 if_bNumEndpoints; */
346 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
347 0x00, /* __u8 if_bInterfaceSubClass; */
348 0x00, /* __u8 if_bInterfaceProtocol; */
349 0x00, /* __u8 if_iInterface; */
350
351 /* one endpoint (status change endpoint) */
352 0x07, /* __u8 ep_bLength; */
353 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
354 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
355 0x03, /* __u8 ep_bmAttributes; Interrupt */
356 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
357 * see hub.c:hub_configure() for details. */
358 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
359 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
360
361 /* one SuperSpeed endpoint companion descriptor */
362 0x06, /* __u8 ss_bLength */
363 USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
364 /* Companion */
365 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
366 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
367 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
368};
369
370/* authorized_default behaviour:
371 * -1 is authorized for all devices except wireless (old behaviour)
372 * 0 is unauthorized for all devices
373 * 1 is authorized for all devices
374 * 2 is authorized for internal devices
375 */
376#define USB_AUTHORIZE_WIRED -1
377#define USB_AUTHORIZE_NONE 0
378#define USB_AUTHORIZE_ALL 1
379#define USB_AUTHORIZE_INTERNAL 2
380
381static int authorized_default = USB_AUTHORIZE_WIRED;
382module_param(authorized_default, int, S_IRUGO|S_IWUSR);
383MODULE_PARM_DESC(authorized_default,
384 "Default USB device authorization: 0 is not authorized, 1 is "
385 "authorized, 2 is authorized for internal devices, -1 is "
386 "authorized except for wireless USB (default, old behaviour)");
387/*-------------------------------------------------------------------------*/
388
389/**
390 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
391 * @s: Null-terminated ASCII (actually ISO-8859-1) string
392 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
393 * @len: Length (in bytes; may be odd) of descriptor buffer.
394 *
395 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
396 * whichever is less.
397 *
398 * Note:
399 * USB String descriptors can contain at most 126 characters; input
400 * strings longer than that are truncated.
401 */
402static unsigned
403ascii2desc(char const *s, u8 *buf, unsigned len)
404{
405 unsigned n, t = 2 + 2*strlen(s);
406
407 if (t > 254)
408 t = 254; /* Longest possible UTF string descriptor */
409 if (len > t)
410 len = t;
411
412 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
413
414 n = len;
415 while (n--) {
416 *buf++ = t;
417 if (!n--)
418 break;
419 *buf++ = t >> 8;
420 t = (unsigned char)*s++;
421 }
422 return len;
423}
424
425/**
426 * rh_string() - provides string descriptors for root hub
427 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
428 * @hcd: the host controller for this root hub
429 * @data: buffer for output packet
430 * @len: length of the provided buffer
431 *
432 * Produces either a manufacturer, product or serial number string for the
433 * virtual root hub device.
434 *
435 * Return: The number of bytes filled in: the length of the descriptor or
436 * of the provided buffer, whichever is less.
437 */
438static unsigned
439rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
440{
441 char buf[100];
442 char const *s;
443 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
444
445 /* language ids */
446 switch (id) {
447 case 0:
448 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
449 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
450 if (len > 4)
451 len = 4;
452 memcpy(data, langids, len);
453 return len;
454 case 1:
455 /* Serial number */
456 s = hcd->self.bus_name;
457 break;
458 case 2:
459 /* Product name */
460 s = hcd->product_desc;
461 break;
462 case 3:
463 /* Manufacturer */
464 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
465 init_utsname()->release, hcd->driver->description);
466 s = buf;
467 break;
468 default:
469 /* Can't happen; caller guarantees it */
470 return 0;
471 }
472
473 return ascii2desc(s, data, len);
474}
475
476
477/* Root hub control transfers execute synchronously */
478static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
479{
480 struct usb_ctrlrequest *cmd;
481 u16 typeReq, wValue, wIndex, wLength;
482 u8 *ubuf = urb->transfer_buffer;
483 unsigned len = 0;
484 int status;
485 u8 patch_wakeup = 0;
486 u8 patch_protocol = 0;
487 u16 tbuf_size;
488 u8 *tbuf = NULL;
489 const u8 *bufp;
490
491 might_sleep();
492
493 spin_lock_irq(&hcd_root_hub_lock);
494 status = usb_hcd_link_urb_to_ep(hcd, urb);
495 spin_unlock_irq(&hcd_root_hub_lock);
496 if (status)
497 return status;
498 urb->hcpriv = hcd; /* Indicate it's queued */
499
500 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
501 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
502 wValue = le16_to_cpu (cmd->wValue);
503 wIndex = le16_to_cpu (cmd->wIndex);
504 wLength = le16_to_cpu (cmd->wLength);
505
506 if (wLength > urb->transfer_buffer_length)
507 goto error;
508
509 /*
510 * tbuf should be at least as big as the
511 * USB hub descriptor.
512 */
513 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
514 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
515 if (!tbuf) {
516 status = -ENOMEM;
517 goto err_alloc;
518 }
519
520 bufp = tbuf;
521
522
523 urb->actual_length = 0;
524 switch (typeReq) {
525
526 /* DEVICE REQUESTS */
527
528 /* The root hub's remote wakeup enable bit is implemented using
529 * driver model wakeup flags. If this system supports wakeup
530 * through USB, userspace may change the default "allow wakeup"
531 * policy through sysfs or these calls.
532 *
533 * Most root hubs support wakeup from downstream devices, for
534 * runtime power management (disabling USB clocks and reducing
535 * VBUS power usage). However, not all of them do so; silicon,
536 * board, and BIOS bugs here are not uncommon, so these can't
537 * be treated quite like external hubs.
538 *
539 * Likewise, not all root hubs will pass wakeup events upstream,
540 * to wake up the whole system. So don't assume root hub and
541 * controller capabilities are identical.
542 */
543
544 case DeviceRequest | USB_REQ_GET_STATUS:
545 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
546 << USB_DEVICE_REMOTE_WAKEUP)
547 | (1 << USB_DEVICE_SELF_POWERED);
548 tbuf[1] = 0;
549 len = 2;
550 break;
551 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
552 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
553 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
554 else
555 goto error;
556 break;
557 case DeviceOutRequest | USB_REQ_SET_FEATURE:
558 if (device_can_wakeup(&hcd->self.root_hub->dev)
559 && wValue == USB_DEVICE_REMOTE_WAKEUP)
560 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
561 else
562 goto error;
563 break;
564 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
565 tbuf[0] = 1;
566 len = 1;
567 fallthrough;
568 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
569 break;
570 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
571 switch (wValue & 0xff00) {
572 case USB_DT_DEVICE << 8:
573 switch (hcd->speed) {
574 case HCD_USB32:
575 case HCD_USB31:
576 bufp = usb31_rh_dev_descriptor;
577 break;
578 case HCD_USB3:
579 bufp = usb3_rh_dev_descriptor;
580 break;
581 case HCD_USB25:
582 bufp = usb25_rh_dev_descriptor;
583 break;
584 case HCD_USB2:
585 bufp = usb2_rh_dev_descriptor;
586 break;
587 case HCD_USB11:
588 bufp = usb11_rh_dev_descriptor;
589 break;
590 default:
591 goto error;
592 }
593 len = 18;
594 if (hcd->has_tt)
595 patch_protocol = 1;
596 break;
597 case USB_DT_CONFIG << 8:
598 switch (hcd->speed) {
599 case HCD_USB32:
600 case HCD_USB31:
601 case HCD_USB3:
602 bufp = ss_rh_config_descriptor;
603 len = sizeof ss_rh_config_descriptor;
604 break;
605 case HCD_USB25:
606 case HCD_USB2:
607 bufp = hs_rh_config_descriptor;
608 len = sizeof hs_rh_config_descriptor;
609 break;
610 case HCD_USB11:
611 bufp = fs_rh_config_descriptor;
612 len = sizeof fs_rh_config_descriptor;
613 break;
614 default:
615 goto error;
616 }
617 if (device_can_wakeup(&hcd->self.root_hub->dev))
618 patch_wakeup = 1;
619 break;
620 case USB_DT_STRING << 8:
621 if ((wValue & 0xff) < 4)
622 urb->actual_length = rh_string(wValue & 0xff,
623 hcd, ubuf, wLength);
624 else /* unsupported IDs --> "protocol stall" */
625 goto error;
626 break;
627 case USB_DT_BOS << 8:
628 goto nongeneric;
629 default:
630 goto error;
631 }
632 break;
633 case DeviceRequest | USB_REQ_GET_INTERFACE:
634 tbuf[0] = 0;
635 len = 1;
636 fallthrough;
637 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
638 break;
639 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
640 /* wValue == urb->dev->devaddr */
641 dev_dbg (hcd->self.controller, "root hub device address %d\n",
642 wValue);
643 break;
644
645 /* INTERFACE REQUESTS (no defined feature/status flags) */
646
647 /* ENDPOINT REQUESTS */
648
649 case EndpointRequest | USB_REQ_GET_STATUS:
650 /* ENDPOINT_HALT flag */
651 tbuf[0] = 0;
652 tbuf[1] = 0;
653 len = 2;
654 fallthrough;
655 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
656 case EndpointOutRequest | USB_REQ_SET_FEATURE:
657 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
658 break;
659
660 /* CLASS REQUESTS (and errors) */
661
662 default:
663nongeneric:
664 /* non-generic request */
665 switch (typeReq) {
666 case GetHubStatus:
667 len = 4;
668 break;
669 case GetPortStatus:
670 if (wValue == HUB_PORT_STATUS)
671 len = 4;
672 else
673 /* other port status types return 8 bytes */
674 len = 8;
675 break;
676 case GetHubDescriptor:
677 len = sizeof (struct usb_hub_descriptor);
678 break;
679 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
680 /* len is returned by hub_control */
681 break;
682 }
683 status = hcd->driver->hub_control (hcd,
684 typeReq, wValue, wIndex,
685 tbuf, wLength);
686
687 if (typeReq == GetHubDescriptor)
688 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
689 (struct usb_hub_descriptor *)tbuf);
690 break;
691error:
692 /* "protocol stall" on error */
693 status = -EPIPE;
694 }
695
696 if (status < 0) {
697 len = 0;
698 if (status != -EPIPE) {
699 dev_dbg (hcd->self.controller,
700 "CTRL: TypeReq=0x%x val=0x%x "
701 "idx=0x%x len=%d ==> %d\n",
702 typeReq, wValue, wIndex,
703 wLength, status);
704 }
705 } else if (status > 0) {
706 /* hub_control may return the length of data copied. */
707 len = status;
708 status = 0;
709 }
710 if (len) {
711 if (urb->transfer_buffer_length < len)
712 len = urb->transfer_buffer_length;
713 urb->actual_length = len;
714 /* always USB_DIR_IN, toward host */
715 memcpy (ubuf, bufp, len);
716
717 /* report whether RH hardware supports remote wakeup */
718 if (patch_wakeup &&
719 len > offsetof (struct usb_config_descriptor,
720 bmAttributes))
721 ((struct usb_config_descriptor *)ubuf)->bmAttributes
722 |= USB_CONFIG_ATT_WAKEUP;
723
724 /* report whether RH hardware has an integrated TT */
725 if (patch_protocol &&
726 len > offsetof(struct usb_device_descriptor,
727 bDeviceProtocol))
728 ((struct usb_device_descriptor *) ubuf)->
729 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
730 }
731
732 kfree(tbuf);
733 err_alloc:
734
735 /* any errors get returned through the urb completion */
736 spin_lock_irq(&hcd_root_hub_lock);
737 usb_hcd_unlink_urb_from_ep(hcd, urb);
738 usb_hcd_giveback_urb(hcd, urb, status);
739 spin_unlock_irq(&hcd_root_hub_lock);
740 return 0;
741}
742
743/*-------------------------------------------------------------------------*/
744
745/*
746 * Root Hub interrupt transfers are polled using a timer if the
747 * driver requests it; otherwise the driver is responsible for
748 * calling usb_hcd_poll_rh_status() when an event occurs.
749 *
750 * Completion handler may not sleep. See usb_hcd_giveback_urb() for details.
751 */
752void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
753{
754 struct urb *urb;
755 int length;
756 int status;
757 unsigned long flags;
758 char buffer[6]; /* Any root hubs with > 31 ports? */
759
760 if (unlikely(!hcd->rh_pollable))
761 return;
762 if (!hcd->uses_new_polling && !hcd->status_urb)
763 return;
764
765 length = hcd->driver->hub_status_data(hcd, buffer);
766 if (length > 0) {
767
768 /* try to complete the status urb */
769 spin_lock_irqsave(&hcd_root_hub_lock, flags);
770 urb = hcd->status_urb;
771 if (urb) {
772 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
773 hcd->status_urb = NULL;
774 if (urb->transfer_buffer_length >= length) {
775 status = 0;
776 } else {
777 status = -EOVERFLOW;
778 length = urb->transfer_buffer_length;
779 }
780 urb->actual_length = length;
781 memcpy(urb->transfer_buffer, buffer, length);
782
783 usb_hcd_unlink_urb_from_ep(hcd, urb);
784 usb_hcd_giveback_urb(hcd, urb, status);
785 } else {
786 length = 0;
787 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
788 }
789 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
790 }
791
792 /* The USB 2.0 spec says 256 ms. This is close enough and won't
793 * exceed that limit if HZ is 100. The math is more clunky than
794 * maybe expected, this is to make sure that all timers for USB devices
795 * fire at the same time to give the CPU a break in between */
796 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
797 (length == 0 && hcd->status_urb != NULL))
798 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
799}
800EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
801
802/* timer callback */
803static void rh_timer_func (struct timer_list *t)
804{
805 struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
806
807 usb_hcd_poll_rh_status(_hcd);
808}
809
810/*-------------------------------------------------------------------------*/
811
812static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
813{
814 int retval;
815 unsigned long flags;
816 unsigned len = 1 + (urb->dev->maxchild / 8);
817
818 spin_lock_irqsave (&hcd_root_hub_lock, flags);
819 if (hcd->status_urb || urb->transfer_buffer_length < len) {
820 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
821 retval = -EINVAL;
822 goto done;
823 }
824
825 retval = usb_hcd_link_urb_to_ep(hcd, urb);
826 if (retval)
827 goto done;
828
829 hcd->status_urb = urb;
830 urb->hcpriv = hcd; /* indicate it's queued */
831 if (!hcd->uses_new_polling)
832 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
833
834 /* If a status change has already occurred, report it ASAP */
835 else if (HCD_POLL_PENDING(hcd))
836 mod_timer(&hcd->rh_timer, jiffies);
837 retval = 0;
838 done:
839 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
840 return retval;
841}
842
843static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
844{
845 if (usb_endpoint_xfer_int(&urb->ep->desc))
846 return rh_queue_status (hcd, urb);
847 if (usb_endpoint_xfer_control(&urb->ep->desc))
848 return rh_call_control (hcd, urb);
849 return -EINVAL;
850}
851
852/*-------------------------------------------------------------------------*/
853
854/* Unlinks of root-hub control URBs are legal, but they don't do anything
855 * since these URBs always execute synchronously.
856 */
857static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
858{
859 unsigned long flags;
860 int rc;
861
862 spin_lock_irqsave(&hcd_root_hub_lock, flags);
863 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
864 if (rc)
865 goto done;
866
867 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
868 ; /* Do nothing */
869
870 } else { /* Status URB */
871 if (!hcd->uses_new_polling)
872 del_timer (&hcd->rh_timer);
873 if (urb == hcd->status_urb) {
874 hcd->status_urb = NULL;
875 usb_hcd_unlink_urb_from_ep(hcd, urb);
876 usb_hcd_giveback_urb(hcd, urb, status);
877 }
878 }
879 done:
880 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
881 return rc;
882}
883
884
885/*-------------------------------------------------------------------------*/
886
887/**
888 * usb_bus_init - shared initialization code
889 * @bus: the bus structure being initialized
890 *
891 * This code is used to initialize a usb_bus structure, memory for which is
892 * separately managed.
893 */
894static void usb_bus_init (struct usb_bus *bus)
895{
896 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
897
898 bus->devnum_next = 1;
899
900 bus->root_hub = NULL;
901 bus->busnum = -1;
902 bus->bandwidth_allocated = 0;
903 bus->bandwidth_int_reqs = 0;
904 bus->bandwidth_isoc_reqs = 0;
905 mutex_init(&bus->devnum_next_mutex);
906}
907
908/*-------------------------------------------------------------------------*/
909
910/**
911 * usb_register_bus - registers the USB host controller with the usb core
912 * @bus: pointer to the bus to register
913 *
914 * Context: task context, might sleep.
915 *
916 * Assigns a bus number, and links the controller into usbcore data
917 * structures so that it can be seen by scanning the bus list.
918 *
919 * Return: 0 if successful. A negative error code otherwise.
920 */
921static int usb_register_bus(struct usb_bus *bus)
922{
923 int result = -E2BIG;
924 int busnum;
925
926 mutex_lock(&usb_bus_idr_lock);
927 busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
928 if (busnum < 0) {
929 pr_err("%s: failed to get bus number\n", usbcore_name);
930 goto error_find_busnum;
931 }
932 bus->busnum = busnum;
933 mutex_unlock(&usb_bus_idr_lock);
934
935 usb_notify_add_bus(bus);
936
937 dev_info (bus->controller, "new USB bus registered, assigned bus "
938 "number %d\n", bus->busnum);
939 return 0;
940
941error_find_busnum:
942 mutex_unlock(&usb_bus_idr_lock);
943 return result;
944}
945
946/**
947 * usb_deregister_bus - deregisters the USB host controller
948 * @bus: pointer to the bus to deregister
949 *
950 * Context: task context, might sleep.
951 *
952 * Recycles the bus number, and unlinks the controller from usbcore data
953 * structures so that it won't be seen by scanning the bus list.
954 */
955static void usb_deregister_bus (struct usb_bus *bus)
956{
957 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
958
959 /*
960 * NOTE: make sure that all the devices are removed by the
961 * controller code, as well as having it call this when cleaning
962 * itself up
963 */
964 mutex_lock(&usb_bus_idr_lock);
965 idr_remove(&usb_bus_idr, bus->busnum);
966 mutex_unlock(&usb_bus_idr_lock);
967
968 usb_notify_remove_bus(bus);
969}
970
971/**
972 * register_root_hub - called by usb_add_hcd() to register a root hub
973 * @hcd: host controller for this root hub
974 *
975 * This function registers the root hub with the USB subsystem. It sets up
976 * the device properly in the device tree and then calls usb_new_device()
977 * to register the usb device. It also assigns the root hub's USB address
978 * (always 1).
979 *
980 * Return: 0 if successful. A negative error code otherwise.
981 */
982static int register_root_hub(struct usb_hcd *hcd)
983{
984 struct device *parent_dev = hcd->self.controller;
985 struct usb_device *usb_dev = hcd->self.root_hub;
986 const int devnum = 1;
987 int retval;
988
989 usb_dev->devnum = devnum;
990 usb_dev->bus->devnum_next = devnum + 1;
991 set_bit (devnum, usb_dev->bus->devmap.devicemap);
992 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
993
994 mutex_lock(&usb_bus_idr_lock);
995
996 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
997 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
998 if (retval != sizeof usb_dev->descriptor) {
999 mutex_unlock(&usb_bus_idr_lock);
1000 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
1001 dev_name(&usb_dev->dev), retval);
1002 return (retval < 0) ? retval : -EMSGSIZE;
1003 }
1004
1005 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
1006 retval = usb_get_bos_descriptor(usb_dev);
1007 if (!retval) {
1008 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1009 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
1010 mutex_unlock(&usb_bus_idr_lock);
1011 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1012 dev_name(&usb_dev->dev), retval);
1013 return retval;
1014 }
1015 }
1016
1017 retval = usb_new_device (usb_dev);
1018 if (retval) {
1019 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1020 dev_name(&usb_dev->dev), retval);
1021 } else {
1022 spin_lock_irq (&hcd_root_hub_lock);
1023 hcd->rh_registered = 1;
1024 spin_unlock_irq (&hcd_root_hub_lock);
1025
1026 /* Did the HC die before the root hub was registered? */
1027 if (HCD_DEAD(hcd))
1028 usb_hc_died (hcd); /* This time clean up */
1029 }
1030 mutex_unlock(&usb_bus_idr_lock);
1031
1032 return retval;
1033}
1034
1035/*
1036 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1037 * @bus: the bus which the root hub belongs to
1038 * @portnum: the port which is being resumed
1039 *
1040 * HCDs should call this function when they know that a resume signal is
1041 * being sent to a root-hub port. The root hub will be prevented from
1042 * going into autosuspend until usb_hcd_end_port_resume() is called.
1043 *
1044 * The bus's private lock must be held by the caller.
1045 */
1046void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1047{
1048 unsigned bit = 1 << portnum;
1049
1050 if (!(bus->resuming_ports & bit)) {
1051 bus->resuming_ports |= bit;
1052 pm_runtime_get_noresume(&bus->root_hub->dev);
1053 }
1054}
1055EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1056
1057/*
1058 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1059 * @bus: the bus which the root hub belongs to
1060 * @portnum: the port which is being resumed
1061 *
1062 * HCDs should call this function when they know that a resume signal has
1063 * stopped being sent to a root-hub port. The root hub will be allowed to
1064 * autosuspend again.
1065 *
1066 * The bus's private lock must be held by the caller.
1067 */
1068void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1069{
1070 unsigned bit = 1 << portnum;
1071
1072 if (bus->resuming_ports & bit) {
1073 bus->resuming_ports &= ~bit;
1074 pm_runtime_put_noidle(&bus->root_hub->dev);
1075 }
1076}
1077EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1078
1079/*-------------------------------------------------------------------------*/
1080
1081/**
1082 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1083 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1084 * @is_input: true iff the transaction sends data to the host
1085 * @isoc: true for isochronous transactions, false for interrupt ones
1086 * @bytecount: how many bytes in the transaction.
1087 *
1088 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1089 *
1090 * Note:
1091 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1092 * scheduled in software, this function is only used for such scheduling.
1093 */
1094long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1095{
1096 unsigned long tmp;
1097
1098 switch (speed) {
1099 case USB_SPEED_LOW: /* INTR only */
1100 if (is_input) {
1101 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1102 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1103 } else {
1104 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1105 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1106 }
1107 case USB_SPEED_FULL: /* ISOC or INTR */
1108 if (isoc) {
1109 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1110 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1111 } else {
1112 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1113 return 9107L + BW_HOST_DELAY + tmp;
1114 }
1115 case USB_SPEED_HIGH: /* ISOC or INTR */
1116 /* FIXME adjust for input vs output */
1117 if (isoc)
1118 tmp = HS_NSECS_ISO (bytecount);
1119 else
1120 tmp = HS_NSECS (bytecount);
1121 return tmp;
1122 default:
1123 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1124 return -1;
1125 }
1126}
1127EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1128
1129
1130/*-------------------------------------------------------------------------*/
1131
1132/*
1133 * Generic HC operations.
1134 */
1135
1136/*-------------------------------------------------------------------------*/
1137
1138/**
1139 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1140 * @hcd: host controller to which @urb was submitted
1141 * @urb: URB being submitted
1142 *
1143 * Host controller drivers should call this routine in their enqueue()
1144 * method. The HCD's private spinlock must be held and interrupts must
1145 * be disabled. The actions carried out here are required for URB
1146 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1147 *
1148 * Return: 0 for no error, otherwise a negative error code (in which case
1149 * the enqueue() method must fail). If no error occurs but enqueue() fails
1150 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1151 * the private spinlock and returning.
1152 */
1153int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1154{
1155 int rc = 0;
1156
1157 spin_lock(&hcd_urb_list_lock);
1158
1159 /* Check that the URB isn't being killed */
1160 if (unlikely(atomic_read(&urb->reject))) {
1161 rc = -EPERM;
1162 goto done;
1163 }
1164
1165 if (unlikely(!urb->ep->enabled)) {
1166 rc = -ENOENT;
1167 goto done;
1168 }
1169
1170 if (unlikely(!urb->dev->can_submit)) {
1171 rc = -EHOSTUNREACH;
1172 goto done;
1173 }
1174
1175 /*
1176 * Check the host controller's state and add the URB to the
1177 * endpoint's queue.
1178 */
1179 if (HCD_RH_RUNNING(hcd)) {
1180 urb->unlinked = 0;
1181 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1182 } else {
1183 rc = -ESHUTDOWN;
1184 goto done;
1185 }
1186 done:
1187 spin_unlock(&hcd_urb_list_lock);
1188 return rc;
1189}
1190EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1191
1192/**
1193 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1194 * @hcd: host controller to which @urb was submitted
1195 * @urb: URB being checked for unlinkability
1196 * @status: error code to store in @urb if the unlink succeeds
1197 *
1198 * Host controller drivers should call this routine in their dequeue()
1199 * method. The HCD's private spinlock must be held and interrupts must
1200 * be disabled. The actions carried out here are required for making
1201 * sure than an unlink is valid.
1202 *
1203 * Return: 0 for no error, otherwise a negative error code (in which case
1204 * the dequeue() method must fail). The possible error codes are:
1205 *
1206 * -EIDRM: @urb was not submitted or has already completed.
1207 * The completion function may not have been called yet.
1208 *
1209 * -EBUSY: @urb has already been unlinked.
1210 */
1211int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1212 int status)
1213{
1214 struct list_head *tmp;
1215
1216 /* insist the urb is still queued */
1217 list_for_each(tmp, &urb->ep->urb_list) {
1218 if (tmp == &urb->urb_list)
1219 break;
1220 }
1221 if (tmp != &urb->urb_list)
1222 return -EIDRM;
1223
1224 /* Any status except -EINPROGRESS means something already started to
1225 * unlink this URB from the hardware. So there's no more work to do.
1226 */
1227 if (urb->unlinked)
1228 return -EBUSY;
1229 urb->unlinked = status;
1230 return 0;
1231}
1232EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1233
1234/**
1235 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1236 * @hcd: host controller to which @urb was submitted
1237 * @urb: URB being unlinked
1238 *
1239 * Host controller drivers should call this routine before calling
1240 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1241 * interrupts must be disabled. The actions carried out here are required
1242 * for URB completion.
1243 */
1244void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1245{
1246 /* clear all state linking urb to this dev (and hcd) */
1247 spin_lock(&hcd_urb_list_lock);
1248 list_del_init(&urb->urb_list);
1249 spin_unlock(&hcd_urb_list_lock);
1250}
1251EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1252
1253/*
1254 * Some usb host controllers can only perform dma using a small SRAM area,
1255 * or have restrictions on addressable DRAM.
1256 * The usb core itself is however optimized for host controllers that can dma
1257 * using regular system memory - like pci devices doing bus mastering.
1258 *
1259 * To support host controllers with limited dma capabilities we provide dma
1260 * bounce buffers. This feature can be enabled by initializing
1261 * hcd->localmem_pool using usb_hcd_setup_local_mem().
1262 *
1263 * The initialized hcd->localmem_pool then tells the usb code to allocate all
1264 * data for dma using the genalloc API.
1265 *
1266 * So, to summarize...
1267 *
1268 * - We need "local" memory, canonical example being
1269 * a small SRAM on a discrete controller being the
1270 * only memory that the controller can read ...
1271 * (a) "normal" kernel memory is no good, and
1272 * (b) there's not enough to share
1273 *
1274 * - So we use that, even though the primary requirement
1275 * is that the memory be "local" (hence addressable
1276 * by that device), not "coherent".
1277 *
1278 */
1279
1280static int hcd_alloc_coherent(struct usb_bus *bus,
1281 gfp_t mem_flags, dma_addr_t *dma_handle,
1282 void **vaddr_handle, size_t size,
1283 enum dma_data_direction dir)
1284{
1285 unsigned char *vaddr;
1286
1287 if (*vaddr_handle == NULL) {
1288 WARN_ON_ONCE(1);
1289 return -EFAULT;
1290 }
1291
1292 vaddr = hcd_buffer_alloc(bus, size + sizeof(unsigned long),
1293 mem_flags, dma_handle);
1294 if (!vaddr)
1295 return -ENOMEM;
1296
1297 /*
1298 * Store the virtual address of the buffer at the end
1299 * of the allocated dma buffer. The size of the buffer
1300 * may be uneven so use unaligned functions instead
1301 * of just rounding up. It makes sense to optimize for
1302 * memory footprint over access speed since the amount
1303 * of memory available for dma may be limited.
1304 */
1305 put_unaligned((unsigned long)*vaddr_handle,
1306 (unsigned long *)(vaddr + size));
1307
1308 if (dir == DMA_TO_DEVICE)
1309 memcpy(vaddr, *vaddr_handle, size);
1310
1311 *vaddr_handle = vaddr;
1312 return 0;
1313}
1314
1315static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1316 void **vaddr_handle, size_t size,
1317 enum dma_data_direction dir)
1318{
1319 unsigned char *vaddr = *vaddr_handle;
1320
1321 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1322
1323 if (dir == DMA_FROM_DEVICE)
1324 memcpy(vaddr, *vaddr_handle, size);
1325
1326 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1327
1328 *vaddr_handle = vaddr;
1329 *dma_handle = 0;
1330}
1331
1332void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1333{
1334 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1335 (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1336 dma_unmap_single(hcd->self.sysdev,
1337 urb->setup_dma,
1338 sizeof(struct usb_ctrlrequest),
1339 DMA_TO_DEVICE);
1340 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1341 hcd_free_coherent(urb->dev->bus,
1342 &urb->setup_dma,
1343 (void **) &urb->setup_packet,
1344 sizeof(struct usb_ctrlrequest),
1345 DMA_TO_DEVICE);
1346
1347 /* Make it safe to call this routine more than once */
1348 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1349}
1350EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1351
1352static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1353{
1354 if (hcd->driver->unmap_urb_for_dma)
1355 hcd->driver->unmap_urb_for_dma(hcd, urb);
1356 else
1357 usb_hcd_unmap_urb_for_dma(hcd, urb);
1358}
1359
1360void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1361{
1362 enum dma_data_direction dir;
1363
1364 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1365
1366 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1367 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1368 (urb->transfer_flags & URB_DMA_MAP_SG))
1369 dma_unmap_sg(hcd->self.sysdev,
1370 urb->sg,
1371 urb->num_sgs,
1372 dir);
1373 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1374 (urb->transfer_flags & URB_DMA_MAP_PAGE))
1375 dma_unmap_page(hcd->self.sysdev,
1376 urb->transfer_dma,
1377 urb->transfer_buffer_length,
1378 dir);
1379 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1380 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1381 dma_unmap_single(hcd->self.sysdev,
1382 urb->transfer_dma,
1383 urb->transfer_buffer_length,
1384 dir);
1385 else if (urb->transfer_flags & URB_MAP_LOCAL)
1386 hcd_free_coherent(urb->dev->bus,
1387 &urb->transfer_dma,
1388 &urb->transfer_buffer,
1389 urb->transfer_buffer_length,
1390 dir);
1391
1392 /* Make it safe to call this routine more than once */
1393 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1394 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1395}
1396EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1397
1398static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1399 gfp_t mem_flags)
1400{
1401 if (hcd->driver->map_urb_for_dma)
1402 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1403 else
1404 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1405}
1406
1407int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1408 gfp_t mem_flags)
1409{
1410 enum dma_data_direction dir;
1411 int ret = 0;
1412
1413 /* Map the URB's buffers for DMA access.
1414 * Lower level HCD code should use *_dma exclusively,
1415 * unless it uses pio or talks to another transport,
1416 * or uses the provided scatter gather list for bulk.
1417 */
1418
1419 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1420 if (hcd->self.uses_pio_for_control)
1421 return ret;
1422 if (hcd->localmem_pool) {
1423 ret = hcd_alloc_coherent(
1424 urb->dev->bus, mem_flags,
1425 &urb->setup_dma,
1426 (void **)&urb->setup_packet,
1427 sizeof(struct usb_ctrlrequest),
1428 DMA_TO_DEVICE);
1429 if (ret)
1430 return ret;
1431 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1432 } else if (hcd_uses_dma(hcd)) {
1433 if (object_is_on_stack(urb->setup_packet)) {
1434 WARN_ONCE(1, "setup packet is on stack\n");
1435 return -EAGAIN;
1436 }
1437
1438 urb->setup_dma = dma_map_single(
1439 hcd->self.sysdev,
1440 urb->setup_packet,
1441 sizeof(struct usb_ctrlrequest),
1442 DMA_TO_DEVICE);
1443 if (dma_mapping_error(hcd->self.sysdev,
1444 urb->setup_dma))
1445 return -EAGAIN;
1446 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1447 }
1448 }
1449
1450 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1451 if (urb->transfer_buffer_length != 0
1452 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1453 if (hcd->localmem_pool) {
1454 ret = hcd_alloc_coherent(
1455 urb->dev->bus, mem_flags,
1456 &urb->transfer_dma,
1457 &urb->transfer_buffer,
1458 urb->transfer_buffer_length,
1459 dir);
1460 if (ret == 0)
1461 urb->transfer_flags |= URB_MAP_LOCAL;
1462 } else if (hcd_uses_dma(hcd)) {
1463 if (urb->num_sgs) {
1464 int n;
1465
1466 /* We don't support sg for isoc transfers ! */
1467 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1468 WARN_ON(1);
1469 return -EINVAL;
1470 }
1471
1472 n = dma_map_sg(
1473 hcd->self.sysdev,
1474 urb->sg,
1475 urb->num_sgs,
1476 dir);
1477 if (!n)
1478 ret = -EAGAIN;
1479 else
1480 urb->transfer_flags |= URB_DMA_MAP_SG;
1481 urb->num_mapped_sgs = n;
1482 if (n != urb->num_sgs)
1483 urb->transfer_flags |=
1484 URB_DMA_SG_COMBINED;
1485 } else if (urb->sg) {
1486 struct scatterlist *sg = urb->sg;
1487 urb->transfer_dma = dma_map_page(
1488 hcd->self.sysdev,
1489 sg_page(sg),
1490 sg->offset,
1491 urb->transfer_buffer_length,
1492 dir);
1493 if (dma_mapping_error(hcd->self.sysdev,
1494 urb->transfer_dma))
1495 ret = -EAGAIN;
1496 else
1497 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1498 } else if (object_is_on_stack(urb->transfer_buffer)) {
1499 WARN_ONCE(1, "transfer buffer is on stack\n");
1500 ret = -EAGAIN;
1501 } else {
1502 urb->transfer_dma = dma_map_single(
1503 hcd->self.sysdev,
1504 urb->transfer_buffer,
1505 urb->transfer_buffer_length,
1506 dir);
1507 if (dma_mapping_error(hcd->self.sysdev,
1508 urb->transfer_dma))
1509 ret = -EAGAIN;
1510 else
1511 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1512 }
1513 }
1514 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1515 URB_SETUP_MAP_LOCAL)))
1516 usb_hcd_unmap_urb_for_dma(hcd, urb);
1517 }
1518 return ret;
1519}
1520EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1521
1522/*-------------------------------------------------------------------------*/
1523
1524/* may be called in any context with a valid urb->dev usecount
1525 * caller surrenders "ownership" of urb
1526 * expects usb_submit_urb() to have sanity checked and conditioned all
1527 * inputs in the urb
1528 */
1529int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1530{
1531 int status;
1532 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1533
1534 /* increment urb's reference count as part of giving it to the HCD
1535 * (which will control it). HCD guarantees that it either returns
1536 * an error or calls giveback(), but not both.
1537 */
1538 usb_get_urb(urb);
1539 atomic_inc(&urb->use_count);
1540 atomic_inc(&urb->dev->urbnum);
1541 usbmon_urb_submit(&hcd->self, urb);
1542
1543 /* NOTE requirements on root-hub callers (usbfs and the hub
1544 * driver, for now): URBs' urb->transfer_buffer must be
1545 * valid and usb_buffer_{sync,unmap}() not be needed, since
1546 * they could clobber root hub response data. Also, control
1547 * URBs must be submitted in process context with interrupts
1548 * enabled.
1549 */
1550
1551 if (is_root_hub(urb->dev)) {
1552 status = rh_urb_enqueue(hcd, urb);
1553 } else {
1554 status = map_urb_for_dma(hcd, urb, mem_flags);
1555 if (likely(status == 0)) {
1556 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1557 if (unlikely(status))
1558 unmap_urb_for_dma(hcd, urb);
1559 }
1560 }
1561
1562 if (unlikely(status)) {
1563 usbmon_urb_submit_error(&hcd->self, urb, status);
1564 urb->hcpriv = NULL;
1565 INIT_LIST_HEAD(&urb->urb_list);
1566 atomic_dec(&urb->use_count);
1567 /*
1568 * Order the write of urb->use_count above before the read
1569 * of urb->reject below. Pairs with the memory barriers in
1570 * usb_kill_urb() and usb_poison_urb().
1571 */
1572 smp_mb__after_atomic();
1573
1574 atomic_dec(&urb->dev->urbnum);
1575 if (atomic_read(&urb->reject))
1576 wake_up(&usb_kill_urb_queue);
1577 usb_put_urb(urb);
1578 }
1579 return status;
1580}
1581
1582/*-------------------------------------------------------------------------*/
1583
1584/* this makes the hcd giveback() the urb more quickly, by kicking it
1585 * off hardware queues (which may take a while) and returning it as
1586 * soon as practical. we've already set up the urb's return status,
1587 * but we can't know if the callback completed already.
1588 */
1589static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1590{
1591 int value;
1592
1593 if (is_root_hub(urb->dev))
1594 value = usb_rh_urb_dequeue(hcd, urb, status);
1595 else {
1596
1597 /* The only reason an HCD might fail this call is if
1598 * it has not yet fully queued the urb to begin with.
1599 * Such failures should be harmless. */
1600 value = hcd->driver->urb_dequeue(hcd, urb, status);
1601 }
1602 return value;
1603}
1604
1605/*
1606 * called in any context
1607 *
1608 * caller guarantees urb won't be recycled till both unlink()
1609 * and the urb's completion function return
1610 */
1611int usb_hcd_unlink_urb (struct urb *urb, int status)
1612{
1613 struct usb_hcd *hcd;
1614 struct usb_device *udev = urb->dev;
1615 int retval = -EIDRM;
1616 unsigned long flags;
1617
1618 /* Prevent the device and bus from going away while
1619 * the unlink is carried out. If they are already gone
1620 * then urb->use_count must be 0, since disconnected
1621 * devices can't have any active URBs.
1622 */
1623 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1624 if (atomic_read(&urb->use_count) > 0) {
1625 retval = 0;
1626 usb_get_dev(udev);
1627 }
1628 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1629 if (retval == 0) {
1630 hcd = bus_to_hcd(urb->dev->bus);
1631 retval = unlink1(hcd, urb, status);
1632 if (retval == 0)
1633 retval = -EINPROGRESS;
1634 else if (retval != -EIDRM && retval != -EBUSY)
1635 dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
1636 urb, retval);
1637 usb_put_dev(udev);
1638 }
1639 return retval;
1640}
1641
1642/*-------------------------------------------------------------------------*/
1643
1644static void __usb_hcd_giveback_urb(struct urb *urb)
1645{
1646 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1647 struct usb_anchor *anchor = urb->anchor;
1648 int status = urb->unlinked;
1649
1650 urb->hcpriv = NULL;
1651 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1652 urb->actual_length < urb->transfer_buffer_length &&
1653 !status))
1654 status = -EREMOTEIO;
1655
1656 unmap_urb_for_dma(hcd, urb);
1657 usbmon_urb_complete(&hcd->self, urb, status);
1658 usb_anchor_suspend_wakeups(anchor);
1659 usb_unanchor_urb(urb);
1660 if (likely(status == 0))
1661 usb_led_activity(USB_LED_EVENT_HOST);
1662
1663 /* pass ownership to the completion handler */
1664 urb->status = status;
1665 /*
1666 * This function can be called in task context inside another remote
1667 * coverage collection section, but kcov doesn't support that kind of
1668 * recursion yet. Only collect coverage in softirq context for now.
1669 */
1670 kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum);
1671 urb->complete(urb);
1672 kcov_remote_stop_softirq();
1673
1674 usb_anchor_resume_wakeups(anchor);
1675 atomic_dec(&urb->use_count);
1676 /*
1677 * Order the write of urb->use_count above before the read
1678 * of urb->reject below. Pairs with the memory barriers in
1679 * usb_kill_urb() and usb_poison_urb().
1680 */
1681 smp_mb__after_atomic();
1682
1683 if (unlikely(atomic_read(&urb->reject)))
1684 wake_up(&usb_kill_urb_queue);
1685 usb_put_urb(urb);
1686}
1687
1688static void usb_giveback_urb_bh(struct tasklet_struct *t)
1689{
1690 struct giveback_urb_bh *bh = from_tasklet(bh, t, bh);
1691 struct list_head local_list;
1692
1693 spin_lock_irq(&bh->lock);
1694 bh->running = true;
1695 list_replace_init(&bh->head, &local_list);
1696 spin_unlock_irq(&bh->lock);
1697
1698 while (!list_empty(&local_list)) {
1699 struct urb *urb;
1700
1701 urb = list_entry(local_list.next, struct urb, urb_list);
1702 list_del_init(&urb->urb_list);
1703 bh->completing_ep = urb->ep;
1704 __usb_hcd_giveback_urb(urb);
1705 bh->completing_ep = NULL;
1706 }
1707
1708 /*
1709 * giveback new URBs next time to prevent this function
1710 * from not exiting for a long time.
1711 */
1712 spin_lock_irq(&bh->lock);
1713 if (!list_empty(&bh->head)) {
1714 if (bh->high_prio)
1715 tasklet_hi_schedule(&bh->bh);
1716 else
1717 tasklet_schedule(&bh->bh);
1718 }
1719 bh->running = false;
1720 spin_unlock_irq(&bh->lock);
1721}
1722
1723/**
1724 * usb_hcd_giveback_urb - return URB from HCD to device driver
1725 * @hcd: host controller returning the URB
1726 * @urb: urb being returned to the USB device driver.
1727 * @status: completion status code for the URB.
1728 *
1729 * Context: atomic. The completion callback is invoked in caller's context.
1730 * For HCDs with HCD_BH flag set, the completion callback is invoked in tasklet
1731 * context (except for URBs submitted to the root hub which always complete in
1732 * caller's context).
1733 *
1734 * This hands the URB from HCD to its USB device driver, using its
1735 * completion function. The HCD has freed all per-urb resources
1736 * (and is done using urb->hcpriv). It also released all HCD locks;
1737 * the device driver won't cause problems if it frees, modifies,
1738 * or resubmits this URB.
1739 *
1740 * If @urb was unlinked, the value of @status will be overridden by
1741 * @urb->unlinked. Erroneous short transfers are detected in case
1742 * the HCD hasn't checked for them.
1743 */
1744void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1745{
1746 struct giveback_urb_bh *bh;
1747 bool running;
1748
1749 /* pass status to tasklet via unlinked */
1750 if (likely(!urb->unlinked))
1751 urb->unlinked = status;
1752
1753 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1754 __usb_hcd_giveback_urb(urb);
1755 return;
1756 }
1757
1758 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe))
1759 bh = &hcd->high_prio_bh;
1760 else
1761 bh = &hcd->low_prio_bh;
1762
1763 spin_lock(&bh->lock);
1764 list_add_tail(&urb->urb_list, &bh->head);
1765 running = bh->running;
1766 spin_unlock(&bh->lock);
1767
1768 if (running)
1769 ;
1770 else if (bh->high_prio)
1771 tasklet_hi_schedule(&bh->bh);
1772 else
1773 tasklet_schedule(&bh->bh);
1774}
1775EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1776
1777/*-------------------------------------------------------------------------*/
1778
1779/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1780 * queue to drain completely. The caller must first insure that no more
1781 * URBs can be submitted for this endpoint.
1782 */
1783void usb_hcd_flush_endpoint(struct usb_device *udev,
1784 struct usb_host_endpoint *ep)
1785{
1786 struct usb_hcd *hcd;
1787 struct urb *urb;
1788
1789 if (!ep)
1790 return;
1791 might_sleep();
1792 hcd = bus_to_hcd(udev->bus);
1793
1794 /* No more submits can occur */
1795 spin_lock_irq(&hcd_urb_list_lock);
1796rescan:
1797 list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
1798 int is_in;
1799
1800 if (urb->unlinked)
1801 continue;
1802 usb_get_urb (urb);
1803 is_in = usb_urb_dir_in(urb);
1804 spin_unlock(&hcd_urb_list_lock);
1805
1806 /* kick hcd */
1807 unlink1(hcd, urb, -ESHUTDOWN);
1808 dev_dbg (hcd->self.controller,
1809 "shutdown urb %pK ep%d%s-%s\n",
1810 urb, usb_endpoint_num(&ep->desc),
1811 is_in ? "in" : "out",
1812 usb_ep_type_string(usb_endpoint_type(&ep->desc)));
1813 usb_put_urb (urb);
1814
1815 /* list contents may have changed */
1816 spin_lock(&hcd_urb_list_lock);
1817 goto rescan;
1818 }
1819 spin_unlock_irq(&hcd_urb_list_lock);
1820
1821 /* Wait until the endpoint queue is completely empty */
1822 while (!list_empty (&ep->urb_list)) {
1823 spin_lock_irq(&hcd_urb_list_lock);
1824
1825 /* The list may have changed while we acquired the spinlock */
1826 urb = NULL;
1827 if (!list_empty (&ep->urb_list)) {
1828 urb = list_entry (ep->urb_list.prev, struct urb,
1829 urb_list);
1830 usb_get_urb (urb);
1831 }
1832 spin_unlock_irq(&hcd_urb_list_lock);
1833
1834 if (urb) {
1835 usb_kill_urb (urb);
1836 usb_put_urb (urb);
1837 }
1838 }
1839}
1840
1841/**
1842 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1843 * the bus bandwidth
1844 * @udev: target &usb_device
1845 * @new_config: new configuration to install
1846 * @cur_alt: the current alternate interface setting
1847 * @new_alt: alternate interface setting that is being installed
1848 *
1849 * To change configurations, pass in the new configuration in new_config,
1850 * and pass NULL for cur_alt and new_alt.
1851 *
1852 * To reset a device's configuration (put the device in the ADDRESSED state),
1853 * pass in NULL for new_config, cur_alt, and new_alt.
1854 *
1855 * To change alternate interface settings, pass in NULL for new_config,
1856 * pass in the current alternate interface setting in cur_alt,
1857 * and pass in the new alternate interface setting in new_alt.
1858 *
1859 * Return: An error if the requested bandwidth change exceeds the
1860 * bus bandwidth or host controller internal resources.
1861 */
1862int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1863 struct usb_host_config *new_config,
1864 struct usb_host_interface *cur_alt,
1865 struct usb_host_interface *new_alt)
1866{
1867 int num_intfs, i, j;
1868 struct usb_host_interface *alt = NULL;
1869 int ret = 0;
1870 struct usb_hcd *hcd;
1871 struct usb_host_endpoint *ep;
1872
1873 hcd = bus_to_hcd(udev->bus);
1874 if (!hcd->driver->check_bandwidth)
1875 return 0;
1876
1877 /* Configuration is being removed - set configuration 0 */
1878 if (!new_config && !cur_alt) {
1879 for (i = 1; i < 16; ++i) {
1880 ep = udev->ep_out[i];
1881 if (ep)
1882 hcd->driver->drop_endpoint(hcd, udev, ep);
1883 ep = udev->ep_in[i];
1884 if (ep)
1885 hcd->driver->drop_endpoint(hcd, udev, ep);
1886 }
1887 hcd->driver->check_bandwidth(hcd, udev);
1888 return 0;
1889 }
1890 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1891 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1892 * of the bus. There will always be bandwidth for endpoint 0, so it's
1893 * ok to exclude it.
1894 */
1895 if (new_config) {
1896 num_intfs = new_config->desc.bNumInterfaces;
1897 /* Remove endpoints (except endpoint 0, which is always on the
1898 * schedule) from the old config from the schedule
1899 */
1900 for (i = 1; i < 16; ++i) {
1901 ep = udev->ep_out[i];
1902 if (ep) {
1903 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1904 if (ret < 0)
1905 goto reset;
1906 }
1907 ep = udev->ep_in[i];
1908 if (ep) {
1909 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
1910 if (ret < 0)
1911 goto reset;
1912 }
1913 }
1914 for (i = 0; i < num_intfs; ++i) {
1915 struct usb_host_interface *first_alt;
1916 int iface_num;
1917
1918 first_alt = &new_config->intf_cache[i]->altsetting[0];
1919 iface_num = first_alt->desc.bInterfaceNumber;
1920 /* Set up endpoints for alternate interface setting 0 */
1921 alt = usb_find_alt_setting(new_config, iface_num, 0);
1922 if (!alt)
1923 /* No alt setting 0? Pick the first setting. */
1924 alt = first_alt;
1925
1926 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
1927 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
1928 if (ret < 0)
1929 goto reset;
1930 }
1931 }
1932 }
1933 if (cur_alt && new_alt) {
1934 struct usb_interface *iface = usb_ifnum_to_if(udev,
1935 cur_alt->desc.bInterfaceNumber);
1936
1937 if (!iface)
1938 return -EINVAL;
1939 if (iface->resetting_device) {
1940 /*
1941 * The USB core just reset the device, so the xHCI host
1942 * and the device will think alt setting 0 is installed.
1943 * However, the USB core will pass in the alternate
1944 * setting installed before the reset as cur_alt. Dig
1945 * out the alternate setting 0 structure, or the first
1946 * alternate setting if a broken device doesn't have alt
1947 * setting 0.
1948 */
1949 cur_alt = usb_altnum_to_altsetting(iface, 0);
1950 if (!cur_alt)
1951 cur_alt = &iface->altsetting[0];
1952 }
1953
1954 /* Drop all the endpoints in the current alt setting */
1955 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
1956 ret = hcd->driver->drop_endpoint(hcd, udev,
1957 &cur_alt->endpoint[i]);
1958 if (ret < 0)
1959 goto reset;
1960 }
1961 /* Add all the endpoints in the new alt setting */
1962 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
1963 ret = hcd->driver->add_endpoint(hcd, udev,
1964 &new_alt->endpoint[i]);
1965 if (ret < 0)
1966 goto reset;
1967 }
1968 }
1969 ret = hcd->driver->check_bandwidth(hcd, udev);
1970reset:
1971 if (ret < 0)
1972 hcd->driver->reset_bandwidth(hcd, udev);
1973 return ret;
1974}
1975
1976/* Disables the endpoint: synchronizes with the hcd to make sure all
1977 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
1978 * have been called previously. Use for set_configuration, set_interface,
1979 * driver removal, physical disconnect.
1980 *
1981 * example: a qh stored in ep->hcpriv, holding state related to endpoint
1982 * type, maxpacket size, toggle, halt status, and scheduling.
1983 */
1984void usb_hcd_disable_endpoint(struct usb_device *udev,
1985 struct usb_host_endpoint *ep)
1986{
1987 struct usb_hcd *hcd;
1988
1989 might_sleep();
1990 hcd = bus_to_hcd(udev->bus);
1991 if (hcd->driver->endpoint_disable)
1992 hcd->driver->endpoint_disable(hcd, ep);
1993}
1994
1995/**
1996 * usb_hcd_reset_endpoint - reset host endpoint state
1997 * @udev: USB device.
1998 * @ep: the endpoint to reset.
1999 *
2000 * Resets any host endpoint state such as the toggle bit, sequence
2001 * number and current window.
2002 */
2003void usb_hcd_reset_endpoint(struct usb_device *udev,
2004 struct usb_host_endpoint *ep)
2005{
2006 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2007
2008 if (hcd->driver->endpoint_reset)
2009 hcd->driver->endpoint_reset(hcd, ep);
2010 else {
2011 int epnum = usb_endpoint_num(&ep->desc);
2012 int is_out = usb_endpoint_dir_out(&ep->desc);
2013 int is_control = usb_endpoint_xfer_control(&ep->desc);
2014
2015 usb_settoggle(udev, epnum, is_out, 0);
2016 if (is_control)
2017 usb_settoggle(udev, epnum, !is_out, 0);
2018 }
2019}
2020
2021/**
2022 * usb_alloc_streams - allocate bulk endpoint stream IDs.
2023 * @interface: alternate setting that includes all endpoints.
2024 * @eps: array of endpoints that need streams.
2025 * @num_eps: number of endpoints in the array.
2026 * @num_streams: number of streams to allocate.
2027 * @mem_flags: flags hcd should use to allocate memory.
2028 *
2029 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2030 * Drivers may queue multiple transfers to different stream IDs, which may
2031 * complete in a different order than they were queued.
2032 *
2033 * Return: On success, the number of allocated streams. On failure, a negative
2034 * error code.
2035 */
2036int usb_alloc_streams(struct usb_interface *interface,
2037 struct usb_host_endpoint **eps, unsigned int num_eps,
2038 unsigned int num_streams, gfp_t mem_flags)
2039{
2040 struct usb_hcd *hcd;
2041 struct usb_device *dev;
2042 int i, ret;
2043
2044 dev = interface_to_usbdev(interface);
2045 hcd = bus_to_hcd(dev->bus);
2046 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2047 return -EINVAL;
2048 if (dev->speed < USB_SPEED_SUPER)
2049 return -EINVAL;
2050 if (dev->state < USB_STATE_CONFIGURED)
2051 return -ENODEV;
2052
2053 for (i = 0; i < num_eps; i++) {
2054 /* Streams only apply to bulk endpoints. */
2055 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2056 return -EINVAL;
2057 /* Re-alloc is not allowed */
2058 if (eps[i]->streams)
2059 return -EINVAL;
2060 }
2061
2062 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2063 num_streams, mem_flags);
2064 if (ret < 0)
2065 return ret;
2066
2067 for (i = 0; i < num_eps; i++)
2068 eps[i]->streams = ret;
2069
2070 return ret;
2071}
2072EXPORT_SYMBOL_GPL(usb_alloc_streams);
2073
2074/**
2075 * usb_free_streams - free bulk endpoint stream IDs.
2076 * @interface: alternate setting that includes all endpoints.
2077 * @eps: array of endpoints to remove streams from.
2078 * @num_eps: number of endpoints in the array.
2079 * @mem_flags: flags hcd should use to allocate memory.
2080 *
2081 * Reverts a group of bulk endpoints back to not using stream IDs.
2082 * Can fail if we are given bad arguments, or HCD is broken.
2083 *
2084 * Return: 0 on success. On failure, a negative error code.
2085 */
2086int usb_free_streams(struct usb_interface *interface,
2087 struct usb_host_endpoint **eps, unsigned int num_eps,
2088 gfp_t mem_flags)
2089{
2090 struct usb_hcd *hcd;
2091 struct usb_device *dev;
2092 int i, ret;
2093
2094 dev = interface_to_usbdev(interface);
2095 hcd = bus_to_hcd(dev->bus);
2096 if (dev->speed < USB_SPEED_SUPER)
2097 return -EINVAL;
2098
2099 /* Double-free is not allowed */
2100 for (i = 0; i < num_eps; i++)
2101 if (!eps[i] || !eps[i]->streams)
2102 return -EINVAL;
2103
2104 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2105 if (ret < 0)
2106 return ret;
2107
2108 for (i = 0; i < num_eps; i++)
2109 eps[i]->streams = 0;
2110
2111 return ret;
2112}
2113EXPORT_SYMBOL_GPL(usb_free_streams);
2114
2115/* Protect against drivers that try to unlink URBs after the device
2116 * is gone, by waiting until all unlinks for @udev are finished.
2117 * Since we don't currently track URBs by device, simply wait until
2118 * nothing is running in the locked region of usb_hcd_unlink_urb().
2119 */
2120void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2121{
2122 spin_lock_irq(&hcd_urb_unlink_lock);
2123 spin_unlock_irq(&hcd_urb_unlink_lock);
2124}
2125
2126/*-------------------------------------------------------------------------*/
2127
2128/* called in any context */
2129int usb_hcd_get_frame_number (struct usb_device *udev)
2130{
2131 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2132
2133 if (!HCD_RH_RUNNING(hcd))
2134 return -ESHUTDOWN;
2135 return hcd->driver->get_frame_number (hcd);
2136}
2137
2138/*-------------------------------------------------------------------------*/
2139#ifdef CONFIG_USB_HCD_TEST_MODE
2140
2141static void usb_ehset_completion(struct urb *urb)
2142{
2143 struct completion *done = urb->context;
2144
2145 complete(done);
2146}
2147/*
2148 * Allocate and initialize a control URB. This request will be used by the
2149 * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
2150 * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
2151 * Return NULL if failed.
2152 */
2153static struct urb *request_single_step_set_feature_urb(
2154 struct usb_device *udev,
2155 void *dr,
2156 void *buf,
2157 struct completion *done)
2158{
2159 struct urb *urb;
2160 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2161
2162 urb = usb_alloc_urb(0, GFP_KERNEL);
2163 if (!urb)
2164 return NULL;
2165
2166 urb->pipe = usb_rcvctrlpipe(udev, 0);
2167
2168 urb->ep = &udev->ep0;
2169 urb->dev = udev;
2170 urb->setup_packet = (void *)dr;
2171 urb->transfer_buffer = buf;
2172 urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
2173 urb->complete = usb_ehset_completion;
2174 urb->status = -EINPROGRESS;
2175 urb->actual_length = 0;
2176 urb->transfer_flags = URB_DIR_IN;
2177 usb_get_urb(urb);
2178 atomic_inc(&urb->use_count);
2179 atomic_inc(&urb->dev->urbnum);
2180 if (map_urb_for_dma(hcd, urb, GFP_KERNEL)) {
2181 usb_put_urb(urb);
2182 usb_free_urb(urb);
2183 return NULL;
2184 }
2185
2186 urb->context = done;
2187 return urb;
2188}
2189
2190int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
2191{
2192 int retval = -ENOMEM;
2193 struct usb_ctrlrequest *dr;
2194 struct urb *urb;
2195 struct usb_device *udev;
2196 struct usb_device_descriptor *buf;
2197 DECLARE_COMPLETION_ONSTACK(done);
2198
2199 /* Obtain udev of the rhub's child port */
2200 udev = usb_hub_find_child(hcd->self.root_hub, port);
2201 if (!udev) {
2202 dev_err(hcd->self.controller, "No device attached to the RootHub\n");
2203 return -ENODEV;
2204 }
2205 buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
2206 if (!buf)
2207 return -ENOMEM;
2208
2209 dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
2210 if (!dr) {
2211 kfree(buf);
2212 return -ENOMEM;
2213 }
2214
2215 /* Fill Setup packet for GetDescriptor */
2216 dr->bRequestType = USB_DIR_IN;
2217 dr->bRequest = USB_REQ_GET_DESCRIPTOR;
2218 dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
2219 dr->wIndex = 0;
2220 dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
2221 urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
2222 if (!urb)
2223 goto cleanup;
2224
2225 /* Submit just the SETUP stage */
2226 retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 1);
2227 if (retval)
2228 goto out1;
2229 if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
2230 usb_kill_urb(urb);
2231 retval = -ETIMEDOUT;
2232 dev_err(hcd->self.controller,
2233 "%s SETUP stage timed out on ep0\n", __func__);
2234 goto out1;
2235 }
2236 msleep(15 * 1000);
2237
2238 /* Complete remaining DATA and STATUS stages using the same URB */
2239 urb->status = -EINPROGRESS;
2240 usb_get_urb(urb);
2241 atomic_inc(&urb->use_count);
2242 atomic_inc(&urb->dev->urbnum);
2243 retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 0);
2244 if (!retval && !wait_for_completion_timeout(&done,
2245 msecs_to_jiffies(2000))) {
2246 usb_kill_urb(urb);
2247 retval = -ETIMEDOUT;
2248 dev_err(hcd->self.controller,
2249 "%s IN stage timed out on ep0\n", __func__);
2250 }
2251out1:
2252 usb_free_urb(urb);
2253cleanup:
2254 kfree(dr);
2255 kfree(buf);
2256 return retval;
2257}
2258EXPORT_SYMBOL_GPL(ehset_single_step_set_feature);
2259#endif /* CONFIG_USB_HCD_TEST_MODE */
2260
2261/*-------------------------------------------------------------------------*/
2262
2263#ifdef CONFIG_PM
2264
2265int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2266{
2267 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2268 int status;
2269 int old_state = hcd->state;
2270
2271 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2272 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2273 rhdev->do_remote_wakeup);
2274 if (HCD_DEAD(hcd)) {
2275 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2276 return 0;
2277 }
2278
2279 if (!hcd->driver->bus_suspend) {
2280 status = -ENOENT;
2281 } else {
2282 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2283 hcd->state = HC_STATE_QUIESCING;
2284 status = hcd->driver->bus_suspend(hcd);
2285 }
2286 if (status == 0) {
2287 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2288 hcd->state = HC_STATE_SUSPENDED;
2289
2290 if (!PMSG_IS_AUTO(msg))
2291 usb_phy_roothub_suspend(hcd->self.sysdev,
2292 hcd->phy_roothub);
2293
2294 /* Did we race with a root-hub wakeup event? */
2295 if (rhdev->do_remote_wakeup) {
2296 char buffer[6];
2297
2298 status = hcd->driver->hub_status_data(hcd, buffer);
2299 if (status != 0) {
2300 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2301 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2302 status = -EBUSY;
2303 }
2304 }
2305 } else {
2306 spin_lock_irq(&hcd_root_hub_lock);
2307 if (!HCD_DEAD(hcd)) {
2308 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2309 hcd->state = old_state;
2310 }
2311 spin_unlock_irq(&hcd_root_hub_lock);
2312 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2313 "suspend", status);
2314 }
2315 return status;
2316}
2317
2318int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2319{
2320 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2321 int status;
2322 int old_state = hcd->state;
2323
2324 dev_dbg(&rhdev->dev, "usb %sresume\n",
2325 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2326 if (HCD_DEAD(hcd)) {
2327 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2328 return 0;
2329 }
2330
2331 if (!PMSG_IS_AUTO(msg)) {
2332 status = usb_phy_roothub_resume(hcd->self.sysdev,
2333 hcd->phy_roothub);
2334 if (status)
2335 return status;
2336 }
2337
2338 if (!hcd->driver->bus_resume)
2339 return -ENOENT;
2340 if (HCD_RH_RUNNING(hcd))
2341 return 0;
2342
2343 hcd->state = HC_STATE_RESUMING;
2344 status = hcd->driver->bus_resume(hcd);
2345 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2346 if (status == 0)
2347 status = usb_phy_roothub_calibrate(hcd->phy_roothub);
2348
2349 if (status == 0) {
2350 struct usb_device *udev;
2351 int port1;
2352
2353 spin_lock_irq(&hcd_root_hub_lock);
2354 if (!HCD_DEAD(hcd)) {
2355 usb_set_device_state(rhdev, rhdev->actconfig
2356 ? USB_STATE_CONFIGURED
2357 : USB_STATE_ADDRESS);
2358 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2359 hcd->state = HC_STATE_RUNNING;
2360 }
2361 spin_unlock_irq(&hcd_root_hub_lock);
2362
2363 /*
2364 * Check whether any of the enabled ports on the root hub are
2365 * unsuspended. If they are then a TRSMRCY delay is needed
2366 * (this is what the USB-2 spec calls a "global resume").
2367 * Otherwise we can skip the delay.
2368 */
2369 usb_hub_for_each_child(rhdev, port1, udev) {
2370 if (udev->state != USB_STATE_NOTATTACHED &&
2371 !udev->port_is_suspended) {
2372 usleep_range(10000, 11000); /* TRSMRCY */
2373 break;
2374 }
2375 }
2376 } else {
2377 hcd->state = old_state;
2378 usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
2379 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2380 "resume", status);
2381 if (status != -ESHUTDOWN)
2382 usb_hc_died(hcd);
2383 }
2384 return status;
2385}
2386
2387/* Workqueue routine for root-hub remote wakeup */
2388static void hcd_resume_work(struct work_struct *work)
2389{
2390 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2391 struct usb_device *udev = hcd->self.root_hub;
2392
2393 usb_remote_wakeup(udev);
2394}
2395
2396/**
2397 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2398 * @hcd: host controller for this root hub
2399 *
2400 * The USB host controller calls this function when its root hub is
2401 * suspended (with the remote wakeup feature enabled) and a remote
2402 * wakeup request is received. The routine submits a workqueue request
2403 * to resume the root hub (that is, manage its downstream ports again).
2404 */
2405void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2406{
2407 unsigned long flags;
2408
2409 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2410 if (hcd->rh_registered) {
2411 pm_wakeup_event(&hcd->self.root_hub->dev, 0);
2412 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2413 queue_work(pm_wq, &hcd->wakeup_work);
2414 }
2415 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2416}
2417EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2418
2419#endif /* CONFIG_PM */
2420
2421/*-------------------------------------------------------------------------*/
2422
2423#ifdef CONFIG_USB_OTG
2424
2425/**
2426 * usb_bus_start_enum - start immediate enumeration (for OTG)
2427 * @bus: the bus (must use hcd framework)
2428 * @port_num: 1-based number of port; usually bus->otg_port
2429 * Context: atomic
2430 *
2431 * Starts enumeration, with an immediate reset followed later by
2432 * hub_wq identifying and possibly configuring the device.
2433 * This is needed by OTG controller drivers, where it helps meet
2434 * HNP protocol timing requirements for starting a port reset.
2435 *
2436 * Return: 0 if successful.
2437 */
2438int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2439{
2440 struct usb_hcd *hcd;
2441 int status = -EOPNOTSUPP;
2442
2443 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2444 * boards with root hubs hooked up to internal devices (instead of
2445 * just the OTG port) may need more attention to resetting...
2446 */
2447 hcd = bus_to_hcd(bus);
2448 if (port_num && hcd->driver->start_port_reset)
2449 status = hcd->driver->start_port_reset(hcd, port_num);
2450
2451 /* allocate hub_wq shortly after (first) root port reset finishes;
2452 * it may issue others, until at least 50 msecs have passed.
2453 */
2454 if (status == 0)
2455 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2456 return status;
2457}
2458EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2459
2460#endif
2461
2462/*-------------------------------------------------------------------------*/
2463
2464/**
2465 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2466 * @irq: the IRQ being raised
2467 * @__hcd: pointer to the HCD whose IRQ is being signaled
2468 *
2469 * If the controller isn't HALTed, calls the driver's irq handler.
2470 * Checks whether the controller is now dead.
2471 *
2472 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2473 */
2474irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2475{
2476 struct usb_hcd *hcd = __hcd;
2477 irqreturn_t rc;
2478
2479 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2480 rc = IRQ_NONE;
2481 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2482 rc = IRQ_NONE;
2483 else
2484 rc = IRQ_HANDLED;
2485
2486 return rc;
2487}
2488EXPORT_SYMBOL_GPL(usb_hcd_irq);
2489
2490/*-------------------------------------------------------------------------*/
2491
2492/* Workqueue routine for when the root-hub has died. */
2493static void hcd_died_work(struct work_struct *work)
2494{
2495 struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work);
2496 static char *env[] = {
2497 "ERROR=DEAD",
2498 NULL
2499 };
2500
2501 /* Notify user space that the host controller has died */
2502 kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env);
2503}
2504
2505/**
2506 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2507 * @hcd: pointer to the HCD representing the controller
2508 *
2509 * This is called by bus glue to report a USB host controller that died
2510 * while operations may still have been pending. It's called automatically
2511 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2512 *
2513 * Only call this function with the primary HCD.
2514 */
2515void usb_hc_died (struct usb_hcd *hcd)
2516{
2517 unsigned long flags;
2518
2519 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2520
2521 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2522 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2523 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2524 if (hcd->rh_registered) {
2525 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2526
2527 /* make hub_wq clean up old urbs and devices */
2528 usb_set_device_state (hcd->self.root_hub,
2529 USB_STATE_NOTATTACHED);
2530 usb_kick_hub_wq(hcd->self.root_hub);
2531 }
2532 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2533 hcd = hcd->shared_hcd;
2534 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2535 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2536 if (hcd->rh_registered) {
2537 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2538
2539 /* make hub_wq clean up old urbs and devices */
2540 usb_set_device_state(hcd->self.root_hub,
2541 USB_STATE_NOTATTACHED);
2542 usb_kick_hub_wq(hcd->self.root_hub);
2543 }
2544 }
2545
2546 /* Handle the case where this function gets called with a shared HCD */
2547 if (usb_hcd_is_primary_hcd(hcd))
2548 schedule_work(&hcd->died_work);
2549 else
2550 schedule_work(&hcd->primary_hcd->died_work);
2551
2552 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2553 /* Make sure that the other roothub is also deallocated. */
2554}
2555EXPORT_SYMBOL_GPL (usb_hc_died);
2556
2557/*-------------------------------------------------------------------------*/
2558
2559static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2560{
2561
2562 spin_lock_init(&bh->lock);
2563 INIT_LIST_HEAD(&bh->head);
2564 tasklet_setup(&bh->bh, usb_giveback_urb_bh);
2565}
2566
2567struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
2568 struct device *sysdev, struct device *dev, const char *bus_name,
2569 struct usb_hcd *primary_hcd)
2570{
2571 struct usb_hcd *hcd;
2572
2573 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2574 if (!hcd)
2575 return NULL;
2576 if (primary_hcd == NULL) {
2577 hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
2578 GFP_KERNEL);
2579 if (!hcd->address0_mutex) {
2580 kfree(hcd);
2581 dev_dbg(dev, "hcd address0 mutex alloc failed\n");
2582 return NULL;
2583 }
2584 mutex_init(hcd->address0_mutex);
2585 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2586 GFP_KERNEL);
2587 if (!hcd->bandwidth_mutex) {
2588 kfree(hcd->address0_mutex);
2589 kfree(hcd);
2590 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2591 return NULL;
2592 }
2593 mutex_init(hcd->bandwidth_mutex);
2594 dev_set_drvdata(dev, hcd);
2595 } else {
2596 mutex_lock(&usb_port_peer_mutex);
2597 hcd->address0_mutex = primary_hcd->address0_mutex;
2598 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2599 hcd->primary_hcd = primary_hcd;
2600 primary_hcd->primary_hcd = primary_hcd;
2601 hcd->shared_hcd = primary_hcd;
2602 primary_hcd->shared_hcd = hcd;
2603 mutex_unlock(&usb_port_peer_mutex);
2604 }
2605
2606 kref_init(&hcd->kref);
2607
2608 usb_bus_init(&hcd->self);
2609 hcd->self.controller = dev;
2610 hcd->self.sysdev = sysdev;
2611 hcd->self.bus_name = bus_name;
2612
2613 timer_setup(&hcd->rh_timer, rh_timer_func, 0);
2614#ifdef CONFIG_PM
2615 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2616#endif
2617
2618 INIT_WORK(&hcd->died_work, hcd_died_work);
2619
2620 hcd->driver = driver;
2621 hcd->speed = driver->flags & HCD_MASK;
2622 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2623 "USB Host Controller";
2624 return hcd;
2625}
2626EXPORT_SYMBOL_GPL(__usb_create_hcd);
2627
2628/**
2629 * usb_create_shared_hcd - create and initialize an HCD structure
2630 * @driver: HC driver that will use this hcd
2631 * @dev: device for this HC, stored in hcd->self.controller
2632 * @bus_name: value to store in hcd->self.bus_name
2633 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2634 * PCI device. Only allocate certain resources for the primary HCD
2635 *
2636 * Context: task context, might sleep.
2637 *
2638 * Allocate a struct usb_hcd, with extra space at the end for the
2639 * HC driver's private data. Initialize the generic members of the
2640 * hcd structure.
2641 *
2642 * Return: On success, a pointer to the created and initialized HCD structure.
2643 * On failure (e.g. if memory is unavailable), %NULL.
2644 */
2645struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2646 struct device *dev, const char *bus_name,
2647 struct usb_hcd *primary_hcd)
2648{
2649 return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
2650}
2651EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2652
2653/**
2654 * usb_create_hcd - create and initialize an HCD structure
2655 * @driver: HC driver that will use this hcd
2656 * @dev: device for this HC, stored in hcd->self.controller
2657 * @bus_name: value to store in hcd->self.bus_name
2658 *
2659 * Context: task context, might sleep.
2660 *
2661 * Allocate a struct usb_hcd, with extra space at the end for the
2662 * HC driver's private data. Initialize the generic members of the
2663 * hcd structure.
2664 *
2665 * Return: On success, a pointer to the created and initialized HCD
2666 * structure. On failure (e.g. if memory is unavailable), %NULL.
2667 */
2668struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2669 struct device *dev, const char *bus_name)
2670{
2671 return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
2672}
2673EXPORT_SYMBOL_GPL(usb_create_hcd);
2674
2675/*
2676 * Roothubs that share one PCI device must also share the bandwidth mutex.
2677 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2678 * deallocated.
2679 *
2680 * Make sure to deallocate the bandwidth_mutex only when the last HCD is
2681 * freed. When hcd_release() is called for either hcd in a peer set,
2682 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
2683 */
2684static void hcd_release(struct kref *kref)
2685{
2686 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2687
2688 mutex_lock(&usb_port_peer_mutex);
2689 if (hcd->shared_hcd) {
2690 struct usb_hcd *peer = hcd->shared_hcd;
2691
2692 peer->shared_hcd = NULL;
2693 peer->primary_hcd = NULL;
2694 } else {
2695 kfree(hcd->address0_mutex);
2696 kfree(hcd->bandwidth_mutex);
2697 }
2698 mutex_unlock(&usb_port_peer_mutex);
2699 kfree(hcd);
2700}
2701
2702struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2703{
2704 if (hcd)
2705 kref_get (&hcd->kref);
2706 return hcd;
2707}
2708EXPORT_SYMBOL_GPL(usb_get_hcd);
2709
2710void usb_put_hcd (struct usb_hcd *hcd)
2711{
2712 if (hcd)
2713 kref_put (&hcd->kref, hcd_release);
2714}
2715EXPORT_SYMBOL_GPL(usb_put_hcd);
2716
2717int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2718{
2719 if (!hcd->primary_hcd)
2720 return 1;
2721 return hcd == hcd->primary_hcd;
2722}
2723EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2724
2725int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2726{
2727 if (!hcd->driver->find_raw_port_number)
2728 return port1;
2729
2730 return hcd->driver->find_raw_port_number(hcd, port1);
2731}
2732
2733static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2734 unsigned int irqnum, unsigned long irqflags)
2735{
2736 int retval;
2737
2738 if (hcd->driver->irq) {
2739
2740 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2741 hcd->driver->description, hcd->self.busnum);
2742 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2743 hcd->irq_descr, hcd);
2744 if (retval != 0) {
2745 dev_err(hcd->self.controller,
2746 "request interrupt %d failed\n",
2747 irqnum);
2748 return retval;
2749 }
2750 hcd->irq = irqnum;
2751 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2752 (hcd->driver->flags & HCD_MEMORY) ?
2753 "io mem" : "io port",
2754 (unsigned long long)hcd->rsrc_start);
2755 } else {
2756 hcd->irq = 0;
2757 if (hcd->rsrc_start)
2758 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2759 (hcd->driver->flags & HCD_MEMORY) ?
2760 "io mem" : "io port",
2761 (unsigned long long)hcd->rsrc_start);
2762 }
2763 return 0;
2764}
2765
2766/*
2767 * Before we free this root hub, flush in-flight peering attempts
2768 * and disable peer lookups
2769 */
2770static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2771{
2772 struct usb_device *rhdev;
2773
2774 mutex_lock(&usb_port_peer_mutex);
2775 rhdev = hcd->self.root_hub;
2776 hcd->self.root_hub = NULL;
2777 mutex_unlock(&usb_port_peer_mutex);
2778 usb_put_dev(rhdev);
2779}
2780
2781/**
2782 * usb_stop_hcd - Halt the HCD
2783 * @hcd: the usb_hcd that has to be halted
2784 *
2785 * Stop the root-hub polling timer and invoke the HCD's ->stop callback.
2786 */
2787static void usb_stop_hcd(struct usb_hcd *hcd)
2788{
2789 hcd->rh_pollable = 0;
2790 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2791 del_timer_sync(&hcd->rh_timer);
2792
2793 hcd->driver->stop(hcd);
2794 hcd->state = HC_STATE_HALT;
2795
2796 /* In case the HCD restarted the timer, stop it again. */
2797 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2798 del_timer_sync(&hcd->rh_timer);
2799}
2800
2801/**
2802 * usb_add_hcd - finish generic HCD structure initialization and register
2803 * @hcd: the usb_hcd structure to initialize
2804 * @irqnum: Interrupt line to allocate
2805 * @irqflags: Interrupt type flags
2806 *
2807 * Finish the remaining parts of generic HCD initialization: allocate the
2808 * buffers of consistent memory, register the bus, request the IRQ line,
2809 * and call the driver's reset() and start() routines.
2810 */
2811int usb_add_hcd(struct usb_hcd *hcd,
2812 unsigned int irqnum, unsigned long irqflags)
2813{
2814 int retval;
2815 struct usb_device *rhdev;
2816 struct usb_hcd *shared_hcd;
2817
2818 if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
2819 hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
2820 if (IS_ERR(hcd->phy_roothub))
2821 return PTR_ERR(hcd->phy_roothub);
2822
2823 retval = usb_phy_roothub_init(hcd->phy_roothub);
2824 if (retval)
2825 return retval;
2826
2827 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2828 PHY_MODE_USB_HOST_SS);
2829 if (retval)
2830 retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
2831 PHY_MODE_USB_HOST);
2832 if (retval)
2833 goto err_usb_phy_roothub_power_on;
2834
2835 retval = usb_phy_roothub_power_on(hcd->phy_roothub);
2836 if (retval)
2837 goto err_usb_phy_roothub_power_on;
2838 }
2839
2840 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2841
2842 switch (authorized_default) {
2843 case USB_AUTHORIZE_NONE:
2844 hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
2845 break;
2846
2847 case USB_AUTHORIZE_ALL:
2848 hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
2849 break;
2850
2851 case USB_AUTHORIZE_INTERNAL:
2852 hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
2853 break;
2854
2855 case USB_AUTHORIZE_WIRED:
2856 default:
2857 hcd->dev_policy = hcd->wireless ?
2858 USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
2859 break;
2860 }
2861
2862 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2863
2864 /* per default all interfaces are authorized */
2865 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2866
2867 /* HC is in reset state, but accessible. Now do the one-time init,
2868 * bottom up so that hcds can customize the root hubs before hub_wq
2869 * starts talking to them. (Note, bus id is assigned early too.)
2870 */
2871 retval = hcd_buffer_create(hcd);
2872 if (retval != 0) {
2873 dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
2874 goto err_create_buf;
2875 }
2876
2877 retval = usb_register_bus(&hcd->self);
2878 if (retval < 0)
2879 goto err_register_bus;
2880
2881 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2882 if (rhdev == NULL) {
2883 dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
2884 retval = -ENOMEM;
2885 goto err_allocate_root_hub;
2886 }
2887 mutex_lock(&usb_port_peer_mutex);
2888 hcd->self.root_hub = rhdev;
2889 mutex_unlock(&usb_port_peer_mutex);
2890
2891 rhdev->rx_lanes = 1;
2892 rhdev->tx_lanes = 1;
2893 rhdev->ssp_rate = USB_SSP_GEN_UNKNOWN;
2894
2895 switch (hcd->speed) {
2896 case HCD_USB11:
2897 rhdev->speed = USB_SPEED_FULL;
2898 break;
2899 case HCD_USB2:
2900 rhdev->speed = USB_SPEED_HIGH;
2901 break;
2902 case HCD_USB25:
2903 rhdev->speed = USB_SPEED_WIRELESS;
2904 break;
2905 case HCD_USB3:
2906 rhdev->speed = USB_SPEED_SUPER;
2907 break;
2908 case HCD_USB32:
2909 rhdev->rx_lanes = 2;
2910 rhdev->tx_lanes = 2;
2911 rhdev->ssp_rate = USB_SSP_GEN_2x2;
2912 rhdev->speed = USB_SPEED_SUPER_PLUS;
2913 break;
2914 case HCD_USB31:
2915 rhdev->ssp_rate = USB_SSP_GEN_2x1;
2916 rhdev->speed = USB_SPEED_SUPER_PLUS;
2917 break;
2918 default:
2919 retval = -EINVAL;
2920 goto err_set_rh_speed;
2921 }
2922
2923 /* wakeup flag init defaults to "everything works" for root hubs,
2924 * but drivers can override it in reset() if needed, along with
2925 * recording the overall controller's system wakeup capability.
2926 */
2927 device_set_wakeup_capable(&rhdev->dev, 1);
2928
2929 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2930 * registered. But since the controller can die at any time,
2931 * let's initialize the flag before touching the hardware.
2932 */
2933 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2934
2935 /* "reset" is misnamed; its role is now one-time init. the controller
2936 * should already have been reset (and boot firmware kicked off etc).
2937 */
2938 if (hcd->driver->reset) {
2939 retval = hcd->driver->reset(hcd);
2940 if (retval < 0) {
2941 dev_err(hcd->self.controller, "can't setup: %d\n",
2942 retval);
2943 goto err_hcd_driver_setup;
2944 }
2945 }
2946 hcd->rh_pollable = 1;
2947
2948 retval = usb_phy_roothub_calibrate(hcd->phy_roothub);
2949 if (retval)
2950 goto err_hcd_driver_setup;
2951
2952 /* NOTE: root hub and controller capabilities may not be the same */
2953 if (device_can_wakeup(hcd->self.controller)
2954 && device_can_wakeup(&hcd->self.root_hub->dev))
2955 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2956
2957 /* initialize tasklets */
2958 init_giveback_urb_bh(&hcd->high_prio_bh);
2959 hcd->high_prio_bh.high_prio = true;
2960 init_giveback_urb_bh(&hcd->low_prio_bh);
2961
2962 /* enable irqs just before we start the controller,
2963 * if the BIOS provides legacy PCI irqs.
2964 */
2965 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2966 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2967 if (retval)
2968 goto err_request_irq;
2969 }
2970
2971 hcd->state = HC_STATE_RUNNING;
2972 retval = hcd->driver->start(hcd);
2973 if (retval < 0) {
2974 dev_err(hcd->self.controller, "startup error %d\n", retval);
2975 goto err_hcd_driver_start;
2976 }
2977
2978 /* starting here, usbcore will pay attention to the shared HCD roothub */
2979 shared_hcd = hcd->shared_hcd;
2980 if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) {
2981 retval = register_root_hub(shared_hcd);
2982 if (retval != 0)
2983 goto err_register_root_hub;
2984
2985 if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd))
2986 usb_hcd_poll_rh_status(shared_hcd);
2987 }
2988
2989 /* starting here, usbcore will pay attention to this root hub */
2990 if (!HCD_DEFER_RH_REGISTER(hcd)) {
2991 retval = register_root_hub(hcd);
2992 if (retval != 0)
2993 goto err_register_root_hub;
2994
2995 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2996 usb_hcd_poll_rh_status(hcd);
2997 }
2998
2999 return retval;
3000
3001err_register_root_hub:
3002 usb_stop_hcd(hcd);
3003err_hcd_driver_start:
3004 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
3005 free_irq(irqnum, hcd);
3006err_request_irq:
3007err_hcd_driver_setup:
3008err_set_rh_speed:
3009 usb_put_invalidate_rhdev(hcd);
3010err_allocate_root_hub:
3011 usb_deregister_bus(&hcd->self);
3012err_register_bus:
3013 hcd_buffer_destroy(hcd);
3014err_create_buf:
3015 usb_phy_roothub_power_off(hcd->phy_roothub);
3016err_usb_phy_roothub_power_on:
3017 usb_phy_roothub_exit(hcd->phy_roothub);
3018
3019 return retval;
3020}
3021EXPORT_SYMBOL_GPL(usb_add_hcd);
3022
3023/**
3024 * usb_remove_hcd - shutdown processing for generic HCDs
3025 * @hcd: the usb_hcd structure to remove
3026 *
3027 * Context: task context, might sleep.
3028 *
3029 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
3030 * invoking the HCD's stop() method.
3031 */
3032void usb_remove_hcd(struct usb_hcd *hcd)
3033{
3034 struct usb_device *rhdev;
3035 bool rh_registered;
3036
3037 if (!hcd) {
3038 pr_debug("%s: hcd is NULL\n", __func__);
3039 return;
3040 }
3041 rhdev = hcd->self.root_hub;
3042
3043 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
3044
3045 usb_get_dev(rhdev);
3046 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
3047 if (HC_IS_RUNNING (hcd->state))
3048 hcd->state = HC_STATE_QUIESCING;
3049
3050 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
3051 spin_lock_irq (&hcd_root_hub_lock);
3052 rh_registered = hcd->rh_registered;
3053 hcd->rh_registered = 0;
3054 spin_unlock_irq (&hcd_root_hub_lock);
3055
3056#ifdef CONFIG_PM
3057 cancel_work_sync(&hcd->wakeup_work);
3058#endif
3059 cancel_work_sync(&hcd->died_work);
3060
3061 mutex_lock(&usb_bus_idr_lock);
3062 if (rh_registered)
3063 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
3064 mutex_unlock(&usb_bus_idr_lock);
3065
3066 /*
3067 * tasklet_kill() isn't needed here because:
3068 * - driver's disconnect() called from usb_disconnect() should
3069 * make sure its URBs are completed during the disconnect()
3070 * callback
3071 *
3072 * - it is too late to run complete() here since driver may have
3073 * been removed already now
3074 */
3075
3076 /* Prevent any more root-hub status calls from the timer.
3077 * The HCD might still restart the timer (if a port status change
3078 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
3079 * the hub_status_data() callback.
3080 */
3081 usb_stop_hcd(hcd);
3082
3083 if (usb_hcd_is_primary_hcd(hcd)) {
3084 if (hcd->irq > 0)
3085 free_irq(hcd->irq, hcd);
3086 }
3087
3088 usb_deregister_bus(&hcd->self);
3089 hcd_buffer_destroy(hcd);
3090
3091 usb_phy_roothub_power_off(hcd->phy_roothub);
3092 usb_phy_roothub_exit(hcd->phy_roothub);
3093
3094 usb_put_invalidate_rhdev(hcd);
3095 hcd->flags = 0;
3096}
3097EXPORT_SYMBOL_GPL(usb_remove_hcd);
3098
3099void
3100usb_hcd_platform_shutdown(struct platform_device *dev)
3101{
3102 struct usb_hcd *hcd = platform_get_drvdata(dev);
3103
3104 /* No need for pm_runtime_put(), we're shutting down */
3105 pm_runtime_get_sync(&dev->dev);
3106
3107 if (hcd->driver->shutdown)
3108 hcd->driver->shutdown(hcd);
3109}
3110EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
3111
3112int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
3113 dma_addr_t dma, size_t size)
3114{
3115 int err;
3116 void *local_mem;
3117
3118 hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4,
3119 dev_to_node(hcd->self.sysdev),
3120 dev_name(hcd->self.sysdev));
3121 if (IS_ERR(hcd->localmem_pool))
3122 return PTR_ERR(hcd->localmem_pool);
3123
3124 /*
3125 * if a physical SRAM address was passed, map it, otherwise
3126 * allocate system memory as a buffer.
3127 */
3128 if (phys_addr)
3129 local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
3130 size, MEMREMAP_WC);
3131 else
3132 local_mem = dmam_alloc_attrs(hcd->self.sysdev, size, &dma,
3133 GFP_KERNEL,
3134 DMA_ATTR_WRITE_COMBINE);
3135
3136 if (IS_ERR_OR_NULL(local_mem)) {
3137 if (!local_mem)
3138 return -ENOMEM;
3139
3140 return PTR_ERR(local_mem);
3141 }
3142
3143 /*
3144 * Here we pass a dma_addr_t but the arg type is a phys_addr_t.
3145 * It's not backed by system memory and thus there's no kernel mapping
3146 * for it.
3147 */
3148 err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem,
3149 dma, size, dev_to_node(hcd->self.sysdev));
3150 if (err < 0) {
3151 dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n",
3152 err);
3153 return err;
3154 }
3155
3156 return 0;
3157}
3158EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem);
3159
3160/*-------------------------------------------------------------------------*/
3161
3162#if IS_ENABLED(CONFIG_USB_MON)
3163
3164const struct usb_mon_operations *mon_ops;
3165
3166/*
3167 * The registration is unlocked.
3168 * We do it this way because we do not want to lock in hot paths.
3169 *
3170 * Notice that the code is minimally error-proof. Because usbmon needs
3171 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
3172 */
3173
3174int usb_mon_register(const struct usb_mon_operations *ops)
3175{
3176
3177 if (mon_ops)
3178 return -EBUSY;
3179
3180 mon_ops = ops;
3181 mb();
3182 return 0;
3183}
3184EXPORT_SYMBOL_GPL (usb_mon_register);
3185
3186void usb_mon_deregister (void)
3187{
3188
3189 if (mon_ops == NULL) {
3190 printk(KERN_ERR "USB: monitor was not registered\n");
3191 return;
3192 }
3193 mon_ops = NULL;
3194 mb();
3195}
3196EXPORT_SYMBOL_GPL (usb_mon_deregister);
3197
3198#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright Linus Torvalds 1999
4 * (C) Copyright Johannes Erdfelt 1999-2001
5 * (C) Copyright Andreas Gal 1999
6 * (C) Copyright Gregory P. Smith 1999
7 * (C) Copyright Deti Fliegl 1999
8 * (C) Copyright Randy Dunlap 2000
9 * (C) Copyright David Brownell 2000-2002
10 */
11
12#include <linux/bcd.h>
13#include <linux/module.h>
14#include <linux/version.h>
15#include <linux/kernel.h>
16#include <linux/sched/task_stack.h>
17#include <linux/slab.h>
18#include <linux/completion.h>
19#include <linux/utsname.h>
20#include <linux/mm.h>
21#include <asm/io.h>
22#include <linux/device.h>
23#include <linux/dma-mapping.h>
24#include <linux/mutex.h>
25#include <asm/irq.h>
26#include <asm/byteorder.h>
27#include <asm/unaligned.h>
28#include <linux/platform_device.h>
29#include <linux/workqueue.h>
30#include <linux/pm_runtime.h>
31#include <linux/types.h>
32
33#include <linux/phy/phy.h>
34#include <linux/usb.h>
35#include <linux/usb/hcd.h>
36#include <linux/usb/phy.h>
37#include <linux/usb/otg.h>
38
39#include "usb.h"
40#include "phy.h"
41
42
43/*-------------------------------------------------------------------------*/
44
45/*
46 * USB Host Controller Driver framework
47 *
48 * Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
49 * HCD-specific behaviors/bugs.
50 *
51 * This does error checks, tracks devices and urbs, and delegates to a
52 * "hc_driver" only for code (and data) that really needs to know about
53 * hardware differences. That includes root hub registers, i/o queues,
54 * and so on ... but as little else as possible.
55 *
56 * Shared code includes most of the "root hub" code (these are emulated,
57 * though each HC's hardware works differently) and PCI glue, plus request
58 * tracking overhead. The HCD code should only block on spinlocks or on
59 * hardware handshaking; blocking on software events (such as other kernel
60 * threads releasing resources, or completing actions) is all generic.
61 *
62 * Happens the USB 2.0 spec says this would be invisible inside the "USBD",
63 * and includes mostly a "HCDI" (HCD Interface) along with some APIs used
64 * only by the hub driver ... and that neither should be seen or used by
65 * usb client device drivers.
66 *
67 * Contributors of ideas or unattributed patches include: David Brownell,
68 * Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
69 *
70 * HISTORY:
71 * 2002-02-21 Pull in most of the usb_bus support from usb.c; some
72 * associated cleanup. "usb_hcd" still != "usb_bus".
73 * 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
74 */
75
76/*-------------------------------------------------------------------------*/
77
78/* Keep track of which host controller drivers are loaded */
79unsigned long usb_hcds_loaded;
80EXPORT_SYMBOL_GPL(usb_hcds_loaded);
81
82/* host controllers we manage */
83DEFINE_IDR (usb_bus_idr);
84EXPORT_SYMBOL_GPL (usb_bus_idr);
85
86/* used when allocating bus numbers */
87#define USB_MAXBUS 64
88
89/* used when updating list of hcds */
90DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
91EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
92
93/* used for controlling access to virtual root hubs */
94static DEFINE_SPINLOCK(hcd_root_hub_lock);
95
96/* used when updating an endpoint's URB list */
97static DEFINE_SPINLOCK(hcd_urb_list_lock);
98
99/* used to protect against unlinking URBs after the device is gone */
100static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
101
102/* wait queue for synchronous unlinks */
103DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
104
105static inline int is_root_hub(struct usb_device *udev)
106{
107 return (udev->parent == NULL);
108}
109
110/*-------------------------------------------------------------------------*/
111
112/*
113 * Sharable chunks of root hub code.
114 */
115
116/*-------------------------------------------------------------------------*/
117#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
118#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
119
120/* usb 3.1 root hub device descriptor */
121static const u8 usb31_rh_dev_descriptor[18] = {
122 0x12, /* __u8 bLength; */
123 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
124 0x10, 0x03, /* __le16 bcdUSB; v3.1 */
125
126 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
127 0x00, /* __u8 bDeviceSubClass; */
128 0x03, /* __u8 bDeviceProtocol; USB 3 hub */
129 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
130
131 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
132 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
133 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
134
135 0x03, /* __u8 iManufacturer; */
136 0x02, /* __u8 iProduct; */
137 0x01, /* __u8 iSerialNumber; */
138 0x01 /* __u8 bNumConfigurations; */
139};
140
141/* usb 3.0 root hub device descriptor */
142static const u8 usb3_rh_dev_descriptor[18] = {
143 0x12, /* __u8 bLength; */
144 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
145 0x00, 0x03, /* __le16 bcdUSB; v3.0 */
146
147 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
148 0x00, /* __u8 bDeviceSubClass; */
149 0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
150 0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
151
152 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
153 0x03, 0x00, /* __le16 idProduct; device 0x0003 */
154 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
155
156 0x03, /* __u8 iManufacturer; */
157 0x02, /* __u8 iProduct; */
158 0x01, /* __u8 iSerialNumber; */
159 0x01 /* __u8 bNumConfigurations; */
160};
161
162/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
163static const u8 usb25_rh_dev_descriptor[18] = {
164 0x12, /* __u8 bLength; */
165 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
166 0x50, 0x02, /* __le16 bcdUSB; v2.5 */
167
168 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
169 0x00, /* __u8 bDeviceSubClass; */
170 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
171 0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
172
173 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
174 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
175 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
176
177 0x03, /* __u8 iManufacturer; */
178 0x02, /* __u8 iProduct; */
179 0x01, /* __u8 iSerialNumber; */
180 0x01 /* __u8 bNumConfigurations; */
181};
182
183/* usb 2.0 root hub device descriptor */
184static const u8 usb2_rh_dev_descriptor[18] = {
185 0x12, /* __u8 bLength; */
186 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
187 0x00, 0x02, /* __le16 bcdUSB; v2.0 */
188
189 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
190 0x00, /* __u8 bDeviceSubClass; */
191 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
192 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
193
194 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
195 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
196 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
197
198 0x03, /* __u8 iManufacturer; */
199 0x02, /* __u8 iProduct; */
200 0x01, /* __u8 iSerialNumber; */
201 0x01 /* __u8 bNumConfigurations; */
202};
203
204/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
205
206/* usb 1.1 root hub device descriptor */
207static const u8 usb11_rh_dev_descriptor[18] = {
208 0x12, /* __u8 bLength; */
209 USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
210 0x10, 0x01, /* __le16 bcdUSB; v1.1 */
211
212 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
213 0x00, /* __u8 bDeviceSubClass; */
214 0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
215 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
216
217 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
218 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
219 KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
220
221 0x03, /* __u8 iManufacturer; */
222 0x02, /* __u8 iProduct; */
223 0x01, /* __u8 iSerialNumber; */
224 0x01 /* __u8 bNumConfigurations; */
225};
226
227
228/*-------------------------------------------------------------------------*/
229
230/* Configuration descriptors for our root hubs */
231
232static const u8 fs_rh_config_descriptor[] = {
233
234 /* one configuration */
235 0x09, /* __u8 bLength; */
236 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
237 0x19, 0x00, /* __le16 wTotalLength; */
238 0x01, /* __u8 bNumInterfaces; (1) */
239 0x01, /* __u8 bConfigurationValue; */
240 0x00, /* __u8 iConfiguration; */
241 0xc0, /* __u8 bmAttributes;
242 Bit 7: must be set,
243 6: Self-powered,
244 5: Remote wakeup,
245 4..0: resvd */
246 0x00, /* __u8 MaxPower; */
247
248 /* USB 1.1:
249 * USB 2.0, single TT organization (mandatory):
250 * one interface, protocol 0
251 *
252 * USB 2.0, multiple TT organization (optional):
253 * two interfaces, protocols 1 (like single TT)
254 * and 2 (multiple TT mode) ... config is
255 * sometimes settable
256 * NOT IMPLEMENTED
257 */
258
259 /* one interface */
260 0x09, /* __u8 if_bLength; */
261 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
262 0x00, /* __u8 if_bInterfaceNumber; */
263 0x00, /* __u8 if_bAlternateSetting; */
264 0x01, /* __u8 if_bNumEndpoints; */
265 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
266 0x00, /* __u8 if_bInterfaceSubClass; */
267 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
268 0x00, /* __u8 if_iInterface; */
269
270 /* one endpoint (status change endpoint) */
271 0x07, /* __u8 ep_bLength; */
272 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
273 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
274 0x03, /* __u8 ep_bmAttributes; Interrupt */
275 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
276 0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
277};
278
279static const u8 hs_rh_config_descriptor[] = {
280
281 /* one configuration */
282 0x09, /* __u8 bLength; */
283 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
284 0x19, 0x00, /* __le16 wTotalLength; */
285 0x01, /* __u8 bNumInterfaces; (1) */
286 0x01, /* __u8 bConfigurationValue; */
287 0x00, /* __u8 iConfiguration; */
288 0xc0, /* __u8 bmAttributes;
289 Bit 7: must be set,
290 6: Self-powered,
291 5: Remote wakeup,
292 4..0: resvd */
293 0x00, /* __u8 MaxPower; */
294
295 /* USB 1.1:
296 * USB 2.0, single TT organization (mandatory):
297 * one interface, protocol 0
298 *
299 * USB 2.0, multiple TT organization (optional):
300 * two interfaces, protocols 1 (like single TT)
301 * and 2 (multiple TT mode) ... config is
302 * sometimes settable
303 * NOT IMPLEMENTED
304 */
305
306 /* one interface */
307 0x09, /* __u8 if_bLength; */
308 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
309 0x00, /* __u8 if_bInterfaceNumber; */
310 0x00, /* __u8 if_bAlternateSetting; */
311 0x01, /* __u8 if_bNumEndpoints; */
312 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
313 0x00, /* __u8 if_bInterfaceSubClass; */
314 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
315 0x00, /* __u8 if_iInterface; */
316
317 /* one endpoint (status change endpoint) */
318 0x07, /* __u8 ep_bLength; */
319 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
320 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
321 0x03, /* __u8 ep_bmAttributes; Interrupt */
322 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
323 * see hub.c:hub_configure() for details. */
324 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
325 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
326};
327
328static const u8 ss_rh_config_descriptor[] = {
329 /* one configuration */
330 0x09, /* __u8 bLength; */
331 USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
332 0x1f, 0x00, /* __le16 wTotalLength; */
333 0x01, /* __u8 bNumInterfaces; (1) */
334 0x01, /* __u8 bConfigurationValue; */
335 0x00, /* __u8 iConfiguration; */
336 0xc0, /* __u8 bmAttributes;
337 Bit 7: must be set,
338 6: Self-powered,
339 5: Remote wakeup,
340 4..0: resvd */
341 0x00, /* __u8 MaxPower; */
342
343 /* one interface */
344 0x09, /* __u8 if_bLength; */
345 USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
346 0x00, /* __u8 if_bInterfaceNumber; */
347 0x00, /* __u8 if_bAlternateSetting; */
348 0x01, /* __u8 if_bNumEndpoints; */
349 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
350 0x00, /* __u8 if_bInterfaceSubClass; */
351 0x00, /* __u8 if_bInterfaceProtocol; */
352 0x00, /* __u8 if_iInterface; */
353
354 /* one endpoint (status change endpoint) */
355 0x07, /* __u8 ep_bLength; */
356 USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
357 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
358 0x03, /* __u8 ep_bmAttributes; Interrupt */
359 /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
360 * see hub.c:hub_configure() for details. */
361 (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
362 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
363
364 /* one SuperSpeed endpoint companion descriptor */
365 0x06, /* __u8 ss_bLength */
366 USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
367 /* Companion */
368 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
369 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
370 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
371};
372
373/* authorized_default behaviour:
374 * -1 is authorized for all devices except wireless (old behaviour)
375 * 0 is unauthorized for all devices
376 * 1 is authorized for all devices
377 */
378static int authorized_default = -1;
379module_param(authorized_default, int, S_IRUGO|S_IWUSR);
380MODULE_PARM_DESC(authorized_default,
381 "Default USB device authorization: 0 is not authorized, 1 is "
382 "authorized, -1 is authorized except for wireless USB (default, "
383 "old behaviour");
384/*-------------------------------------------------------------------------*/
385
386/**
387 * ascii2desc() - Helper routine for producing UTF-16LE string descriptors
388 * @s: Null-terminated ASCII (actually ISO-8859-1) string
389 * @buf: Buffer for USB string descriptor (header + UTF-16LE)
390 * @len: Length (in bytes; may be odd) of descriptor buffer.
391 *
392 * Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
393 * whichever is less.
394 *
395 * Note:
396 * USB String descriptors can contain at most 126 characters; input
397 * strings longer than that are truncated.
398 */
399static unsigned
400ascii2desc(char const *s, u8 *buf, unsigned len)
401{
402 unsigned n, t = 2 + 2*strlen(s);
403
404 if (t > 254)
405 t = 254; /* Longest possible UTF string descriptor */
406 if (len > t)
407 len = t;
408
409 t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
410
411 n = len;
412 while (n--) {
413 *buf++ = t;
414 if (!n--)
415 break;
416 *buf++ = t >> 8;
417 t = (unsigned char)*s++;
418 }
419 return len;
420}
421
422/**
423 * rh_string() - provides string descriptors for root hub
424 * @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
425 * @hcd: the host controller for this root hub
426 * @data: buffer for output packet
427 * @len: length of the provided buffer
428 *
429 * Produces either a manufacturer, product or serial number string for the
430 * virtual root hub device.
431 *
432 * Return: The number of bytes filled in: the length of the descriptor or
433 * of the provided buffer, whichever is less.
434 */
435static unsigned
436rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
437{
438 char buf[100];
439 char const *s;
440 static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
441
442 /* language ids */
443 switch (id) {
444 case 0:
445 /* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
446 /* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
447 if (len > 4)
448 len = 4;
449 memcpy(data, langids, len);
450 return len;
451 case 1:
452 /* Serial number */
453 s = hcd->self.bus_name;
454 break;
455 case 2:
456 /* Product name */
457 s = hcd->product_desc;
458 break;
459 case 3:
460 /* Manufacturer */
461 snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
462 init_utsname()->release, hcd->driver->description);
463 s = buf;
464 break;
465 default:
466 /* Can't happen; caller guarantees it */
467 return 0;
468 }
469
470 return ascii2desc(s, data, len);
471}
472
473
474/* Root hub control transfers execute synchronously */
475static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
476{
477 struct usb_ctrlrequest *cmd;
478 u16 typeReq, wValue, wIndex, wLength;
479 u8 *ubuf = urb->transfer_buffer;
480 unsigned len = 0;
481 int status;
482 u8 patch_wakeup = 0;
483 u8 patch_protocol = 0;
484 u16 tbuf_size;
485 u8 *tbuf = NULL;
486 const u8 *bufp;
487
488 might_sleep();
489
490 spin_lock_irq(&hcd_root_hub_lock);
491 status = usb_hcd_link_urb_to_ep(hcd, urb);
492 spin_unlock_irq(&hcd_root_hub_lock);
493 if (status)
494 return status;
495 urb->hcpriv = hcd; /* Indicate it's queued */
496
497 cmd = (struct usb_ctrlrequest *) urb->setup_packet;
498 typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
499 wValue = le16_to_cpu (cmd->wValue);
500 wIndex = le16_to_cpu (cmd->wIndex);
501 wLength = le16_to_cpu (cmd->wLength);
502
503 if (wLength > urb->transfer_buffer_length)
504 goto error;
505
506 /*
507 * tbuf should be at least as big as the
508 * USB hub descriptor.
509 */
510 tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
511 tbuf = kzalloc(tbuf_size, GFP_KERNEL);
512 if (!tbuf) {
513 status = -ENOMEM;
514 goto err_alloc;
515 }
516
517 bufp = tbuf;
518
519
520 urb->actual_length = 0;
521 switch (typeReq) {
522
523 /* DEVICE REQUESTS */
524
525 /* The root hub's remote wakeup enable bit is implemented using
526 * driver model wakeup flags. If this system supports wakeup
527 * through USB, userspace may change the default "allow wakeup"
528 * policy through sysfs or these calls.
529 *
530 * Most root hubs support wakeup from downstream devices, for
531 * runtime power management (disabling USB clocks and reducing
532 * VBUS power usage). However, not all of them do so; silicon,
533 * board, and BIOS bugs here are not uncommon, so these can't
534 * be treated quite like external hubs.
535 *
536 * Likewise, not all root hubs will pass wakeup events upstream,
537 * to wake up the whole system. So don't assume root hub and
538 * controller capabilities are identical.
539 */
540
541 case DeviceRequest | USB_REQ_GET_STATUS:
542 tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
543 << USB_DEVICE_REMOTE_WAKEUP)
544 | (1 << USB_DEVICE_SELF_POWERED);
545 tbuf[1] = 0;
546 len = 2;
547 break;
548 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
549 if (wValue == USB_DEVICE_REMOTE_WAKEUP)
550 device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
551 else
552 goto error;
553 break;
554 case DeviceOutRequest | USB_REQ_SET_FEATURE:
555 if (device_can_wakeup(&hcd->self.root_hub->dev)
556 && wValue == USB_DEVICE_REMOTE_WAKEUP)
557 device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
558 else
559 goto error;
560 break;
561 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
562 tbuf[0] = 1;
563 len = 1;
564 /* FALLTHROUGH */
565 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
566 break;
567 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
568 switch (wValue & 0xff00) {
569 case USB_DT_DEVICE << 8:
570 switch (hcd->speed) {
571 case HCD_USB31:
572 bufp = usb31_rh_dev_descriptor;
573 break;
574 case HCD_USB3:
575 bufp = usb3_rh_dev_descriptor;
576 break;
577 case HCD_USB25:
578 bufp = usb25_rh_dev_descriptor;
579 break;
580 case HCD_USB2:
581 bufp = usb2_rh_dev_descriptor;
582 break;
583 case HCD_USB11:
584 bufp = usb11_rh_dev_descriptor;
585 break;
586 default:
587 goto error;
588 }
589 len = 18;
590 if (hcd->has_tt)
591 patch_protocol = 1;
592 break;
593 case USB_DT_CONFIG << 8:
594 switch (hcd->speed) {
595 case HCD_USB31:
596 case HCD_USB3:
597 bufp = ss_rh_config_descriptor;
598 len = sizeof ss_rh_config_descriptor;
599 break;
600 case HCD_USB25:
601 case HCD_USB2:
602 bufp = hs_rh_config_descriptor;
603 len = sizeof hs_rh_config_descriptor;
604 break;
605 case HCD_USB11:
606 bufp = fs_rh_config_descriptor;
607 len = sizeof fs_rh_config_descriptor;
608 break;
609 default:
610 goto error;
611 }
612 if (device_can_wakeup(&hcd->self.root_hub->dev))
613 patch_wakeup = 1;
614 break;
615 case USB_DT_STRING << 8:
616 if ((wValue & 0xff) < 4)
617 urb->actual_length = rh_string(wValue & 0xff,
618 hcd, ubuf, wLength);
619 else /* unsupported IDs --> "protocol stall" */
620 goto error;
621 break;
622 case USB_DT_BOS << 8:
623 goto nongeneric;
624 default:
625 goto error;
626 }
627 break;
628 case DeviceRequest | USB_REQ_GET_INTERFACE:
629 tbuf[0] = 0;
630 len = 1;
631 /* FALLTHROUGH */
632 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
633 break;
634 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
635 /* wValue == urb->dev->devaddr */
636 dev_dbg (hcd->self.controller, "root hub device address %d\n",
637 wValue);
638 break;
639
640 /* INTERFACE REQUESTS (no defined feature/status flags) */
641
642 /* ENDPOINT REQUESTS */
643
644 case EndpointRequest | USB_REQ_GET_STATUS:
645 /* ENDPOINT_HALT flag */
646 tbuf[0] = 0;
647 tbuf[1] = 0;
648 len = 2;
649 /* FALLTHROUGH */
650 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
651 case EndpointOutRequest | USB_REQ_SET_FEATURE:
652 dev_dbg (hcd->self.controller, "no endpoint features yet\n");
653 break;
654
655 /* CLASS REQUESTS (and errors) */
656
657 default:
658nongeneric:
659 /* non-generic request */
660 switch (typeReq) {
661 case GetHubStatus:
662 len = 4;
663 break;
664 case GetPortStatus:
665 if (wValue == HUB_PORT_STATUS)
666 len = 4;
667 else
668 /* other port status types return 8 bytes */
669 len = 8;
670 break;
671 case GetHubDescriptor:
672 len = sizeof (struct usb_hub_descriptor);
673 break;
674 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
675 /* len is returned by hub_control */
676 break;
677 }
678 status = hcd->driver->hub_control (hcd,
679 typeReq, wValue, wIndex,
680 tbuf, wLength);
681
682 if (typeReq == GetHubDescriptor)
683 usb_hub_adjust_deviceremovable(hcd->self.root_hub,
684 (struct usb_hub_descriptor *)tbuf);
685 break;
686error:
687 /* "protocol stall" on error */
688 status = -EPIPE;
689 }
690
691 if (status < 0) {
692 len = 0;
693 if (status != -EPIPE) {
694 dev_dbg (hcd->self.controller,
695 "CTRL: TypeReq=0x%x val=0x%x "
696 "idx=0x%x len=%d ==> %d\n",
697 typeReq, wValue, wIndex,
698 wLength, status);
699 }
700 } else if (status > 0) {
701 /* hub_control may return the length of data copied. */
702 len = status;
703 status = 0;
704 }
705 if (len) {
706 if (urb->transfer_buffer_length < len)
707 len = urb->transfer_buffer_length;
708 urb->actual_length = len;
709 /* always USB_DIR_IN, toward host */
710 memcpy (ubuf, bufp, len);
711
712 /* report whether RH hardware supports remote wakeup */
713 if (patch_wakeup &&
714 len > offsetof (struct usb_config_descriptor,
715 bmAttributes))
716 ((struct usb_config_descriptor *)ubuf)->bmAttributes
717 |= USB_CONFIG_ATT_WAKEUP;
718
719 /* report whether RH hardware has an integrated TT */
720 if (patch_protocol &&
721 len > offsetof(struct usb_device_descriptor,
722 bDeviceProtocol))
723 ((struct usb_device_descriptor *) ubuf)->
724 bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
725 }
726
727 kfree(tbuf);
728 err_alloc:
729
730 /* any errors get returned through the urb completion */
731 spin_lock_irq(&hcd_root_hub_lock);
732 usb_hcd_unlink_urb_from_ep(hcd, urb);
733 usb_hcd_giveback_urb(hcd, urb, status);
734 spin_unlock_irq(&hcd_root_hub_lock);
735 return 0;
736}
737
738/*-------------------------------------------------------------------------*/
739
740/*
741 * Root Hub interrupt transfers are polled using a timer if the
742 * driver requests it; otherwise the driver is responsible for
743 * calling usb_hcd_poll_rh_status() when an event occurs.
744 *
745 * Completions are called in_interrupt(), but they may or may not
746 * be in_irq().
747 */
748void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
749{
750 struct urb *urb;
751 int length;
752 unsigned long flags;
753 char buffer[6]; /* Any root hubs with > 31 ports? */
754
755 if (unlikely(!hcd->rh_pollable))
756 return;
757 if (!hcd->uses_new_polling && !hcd->status_urb)
758 return;
759
760 length = hcd->driver->hub_status_data(hcd, buffer);
761 if (length > 0) {
762
763 /* try to complete the status urb */
764 spin_lock_irqsave(&hcd_root_hub_lock, flags);
765 urb = hcd->status_urb;
766 if (urb) {
767 clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
768 hcd->status_urb = NULL;
769 urb->actual_length = length;
770 memcpy(urb->transfer_buffer, buffer, length);
771
772 usb_hcd_unlink_urb_from_ep(hcd, urb);
773 usb_hcd_giveback_urb(hcd, urb, 0);
774 } else {
775 length = 0;
776 set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
777 }
778 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
779 }
780
781 /* The USB 2.0 spec says 256 ms. This is close enough and won't
782 * exceed that limit if HZ is 100. The math is more clunky than
783 * maybe expected, this is to make sure that all timers for USB devices
784 * fire at the same time to give the CPU a break in between */
785 if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
786 (length == 0 && hcd->status_urb != NULL))
787 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
788}
789EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
790
791/* timer callback */
792static void rh_timer_func (struct timer_list *t)
793{
794 struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
795
796 usb_hcd_poll_rh_status(_hcd);
797}
798
799/*-------------------------------------------------------------------------*/
800
801static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
802{
803 int retval;
804 unsigned long flags;
805 unsigned len = 1 + (urb->dev->maxchild / 8);
806
807 spin_lock_irqsave (&hcd_root_hub_lock, flags);
808 if (hcd->status_urb || urb->transfer_buffer_length < len) {
809 dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
810 retval = -EINVAL;
811 goto done;
812 }
813
814 retval = usb_hcd_link_urb_to_ep(hcd, urb);
815 if (retval)
816 goto done;
817
818 hcd->status_urb = urb;
819 urb->hcpriv = hcd; /* indicate it's queued */
820 if (!hcd->uses_new_polling)
821 mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
822
823 /* If a status change has already occurred, report it ASAP */
824 else if (HCD_POLL_PENDING(hcd))
825 mod_timer(&hcd->rh_timer, jiffies);
826 retval = 0;
827 done:
828 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
829 return retval;
830}
831
832static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
833{
834 if (usb_endpoint_xfer_int(&urb->ep->desc))
835 return rh_queue_status (hcd, urb);
836 if (usb_endpoint_xfer_control(&urb->ep->desc))
837 return rh_call_control (hcd, urb);
838 return -EINVAL;
839}
840
841/*-------------------------------------------------------------------------*/
842
843/* Unlinks of root-hub control URBs are legal, but they don't do anything
844 * since these URBs always execute synchronously.
845 */
846static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
847{
848 unsigned long flags;
849 int rc;
850
851 spin_lock_irqsave(&hcd_root_hub_lock, flags);
852 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
853 if (rc)
854 goto done;
855
856 if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
857 ; /* Do nothing */
858
859 } else { /* Status URB */
860 if (!hcd->uses_new_polling)
861 del_timer (&hcd->rh_timer);
862 if (urb == hcd->status_urb) {
863 hcd->status_urb = NULL;
864 usb_hcd_unlink_urb_from_ep(hcd, urb);
865 usb_hcd_giveback_urb(hcd, urb, status);
866 }
867 }
868 done:
869 spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
870 return rc;
871}
872
873
874
875/*
876 * Show & store the current value of authorized_default
877 */
878static ssize_t authorized_default_show(struct device *dev,
879 struct device_attribute *attr, char *buf)
880{
881 struct usb_device *rh_usb_dev = to_usb_device(dev);
882 struct usb_bus *usb_bus = rh_usb_dev->bus;
883 struct usb_hcd *hcd;
884
885 hcd = bus_to_hcd(usb_bus);
886 return snprintf(buf, PAGE_SIZE, "%u\n", !!HCD_DEV_AUTHORIZED(hcd));
887}
888
889static ssize_t authorized_default_store(struct device *dev,
890 struct device_attribute *attr,
891 const char *buf, size_t size)
892{
893 ssize_t result;
894 unsigned val;
895 struct usb_device *rh_usb_dev = to_usb_device(dev);
896 struct usb_bus *usb_bus = rh_usb_dev->bus;
897 struct usb_hcd *hcd;
898
899 hcd = bus_to_hcd(usb_bus);
900 result = sscanf(buf, "%u\n", &val);
901 if (result == 1) {
902 if (val)
903 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
904 else
905 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
906
907 result = size;
908 } else {
909 result = -EINVAL;
910 }
911 return result;
912}
913static DEVICE_ATTR_RW(authorized_default);
914
915/*
916 * interface_authorized_default_show - show default authorization status
917 * for USB interfaces
918 *
919 * note: interface_authorized_default is the default value
920 * for initializing the authorized attribute of interfaces
921 */
922static ssize_t interface_authorized_default_show(struct device *dev,
923 struct device_attribute *attr, char *buf)
924{
925 struct usb_device *usb_dev = to_usb_device(dev);
926 struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
927
928 return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd));
929}
930
931/*
932 * interface_authorized_default_store - store default authorization status
933 * for USB interfaces
934 *
935 * note: interface_authorized_default is the default value
936 * for initializing the authorized attribute of interfaces
937 */
938static ssize_t interface_authorized_default_store(struct device *dev,
939 struct device_attribute *attr, const char *buf, size_t count)
940{
941 struct usb_device *usb_dev = to_usb_device(dev);
942 struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
943 int rc = count;
944 bool val;
945
946 if (strtobool(buf, &val) != 0)
947 return -EINVAL;
948
949 if (val)
950 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
951 else
952 clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
953
954 return rc;
955}
956static DEVICE_ATTR_RW(interface_authorized_default);
957
958/* Group all the USB bus attributes */
959static struct attribute *usb_bus_attrs[] = {
960 &dev_attr_authorized_default.attr,
961 &dev_attr_interface_authorized_default.attr,
962 NULL,
963};
964
965static const struct attribute_group usb_bus_attr_group = {
966 .name = NULL, /* we want them in the same directory */
967 .attrs = usb_bus_attrs,
968};
969
970
971
972/*-------------------------------------------------------------------------*/
973
974/**
975 * usb_bus_init - shared initialization code
976 * @bus: the bus structure being initialized
977 *
978 * This code is used to initialize a usb_bus structure, memory for which is
979 * separately managed.
980 */
981static void usb_bus_init (struct usb_bus *bus)
982{
983 memset (&bus->devmap, 0, sizeof(struct usb_devmap));
984
985 bus->devnum_next = 1;
986
987 bus->root_hub = NULL;
988 bus->busnum = -1;
989 bus->bandwidth_allocated = 0;
990 bus->bandwidth_int_reqs = 0;
991 bus->bandwidth_isoc_reqs = 0;
992 mutex_init(&bus->devnum_next_mutex);
993}
994
995/*-------------------------------------------------------------------------*/
996
997/**
998 * usb_register_bus - registers the USB host controller with the usb core
999 * @bus: pointer to the bus to register
1000 * Context: !in_interrupt()
1001 *
1002 * Assigns a bus number, and links the controller into usbcore data
1003 * structures so that it can be seen by scanning the bus list.
1004 *
1005 * Return: 0 if successful. A negative error code otherwise.
1006 */
1007static int usb_register_bus(struct usb_bus *bus)
1008{
1009 int result = -E2BIG;
1010 int busnum;
1011
1012 mutex_lock(&usb_bus_idr_lock);
1013 busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
1014 if (busnum < 0) {
1015 pr_err("%s: failed to get bus number\n", usbcore_name);
1016 goto error_find_busnum;
1017 }
1018 bus->busnum = busnum;
1019 mutex_unlock(&usb_bus_idr_lock);
1020
1021 usb_notify_add_bus(bus);
1022
1023 dev_info (bus->controller, "new USB bus registered, assigned bus "
1024 "number %d\n", bus->busnum);
1025 return 0;
1026
1027error_find_busnum:
1028 mutex_unlock(&usb_bus_idr_lock);
1029 return result;
1030}
1031
1032/**
1033 * usb_deregister_bus - deregisters the USB host controller
1034 * @bus: pointer to the bus to deregister
1035 * Context: !in_interrupt()
1036 *
1037 * Recycles the bus number, and unlinks the controller from usbcore data
1038 * structures so that it won't be seen by scanning the bus list.
1039 */
1040static void usb_deregister_bus (struct usb_bus *bus)
1041{
1042 dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
1043
1044 /*
1045 * NOTE: make sure that all the devices are removed by the
1046 * controller code, as well as having it call this when cleaning
1047 * itself up
1048 */
1049 mutex_lock(&usb_bus_idr_lock);
1050 idr_remove(&usb_bus_idr, bus->busnum);
1051 mutex_unlock(&usb_bus_idr_lock);
1052
1053 usb_notify_remove_bus(bus);
1054}
1055
1056/**
1057 * register_root_hub - called by usb_add_hcd() to register a root hub
1058 * @hcd: host controller for this root hub
1059 *
1060 * This function registers the root hub with the USB subsystem. It sets up
1061 * the device properly in the device tree and then calls usb_new_device()
1062 * to register the usb device. It also assigns the root hub's USB address
1063 * (always 1).
1064 *
1065 * Return: 0 if successful. A negative error code otherwise.
1066 */
1067static int register_root_hub(struct usb_hcd *hcd)
1068{
1069 struct device *parent_dev = hcd->self.controller;
1070 struct usb_device *usb_dev = hcd->self.root_hub;
1071 const int devnum = 1;
1072 int retval;
1073
1074 usb_dev->devnum = devnum;
1075 usb_dev->bus->devnum_next = devnum + 1;
1076 memset (&usb_dev->bus->devmap.devicemap, 0,
1077 sizeof usb_dev->bus->devmap.devicemap);
1078 set_bit (devnum, usb_dev->bus->devmap.devicemap);
1079 usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
1080
1081 mutex_lock(&usb_bus_idr_lock);
1082
1083 usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
1084 retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
1085 if (retval != sizeof usb_dev->descriptor) {
1086 mutex_unlock(&usb_bus_idr_lock);
1087 dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
1088 dev_name(&usb_dev->dev), retval);
1089 return (retval < 0) ? retval : -EMSGSIZE;
1090 }
1091
1092 if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
1093 retval = usb_get_bos_descriptor(usb_dev);
1094 if (!retval) {
1095 usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
1096 } else if (usb_dev->speed >= USB_SPEED_SUPER) {
1097 mutex_unlock(&usb_bus_idr_lock);
1098 dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
1099 dev_name(&usb_dev->dev), retval);
1100 return retval;
1101 }
1102 }
1103
1104 retval = usb_new_device (usb_dev);
1105 if (retval) {
1106 dev_err (parent_dev, "can't register root hub for %s, %d\n",
1107 dev_name(&usb_dev->dev), retval);
1108 } else {
1109 spin_lock_irq (&hcd_root_hub_lock);
1110 hcd->rh_registered = 1;
1111 spin_unlock_irq (&hcd_root_hub_lock);
1112
1113 /* Did the HC die before the root hub was registered? */
1114 if (HCD_DEAD(hcd))
1115 usb_hc_died (hcd); /* This time clean up */
1116 }
1117 mutex_unlock(&usb_bus_idr_lock);
1118
1119 return retval;
1120}
1121
1122/*
1123 * usb_hcd_start_port_resume - a root-hub port is sending a resume signal
1124 * @bus: the bus which the root hub belongs to
1125 * @portnum: the port which is being resumed
1126 *
1127 * HCDs should call this function when they know that a resume signal is
1128 * being sent to a root-hub port. The root hub will be prevented from
1129 * going into autosuspend until usb_hcd_end_port_resume() is called.
1130 *
1131 * The bus's private lock must be held by the caller.
1132 */
1133void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
1134{
1135 unsigned bit = 1 << portnum;
1136
1137 if (!(bus->resuming_ports & bit)) {
1138 bus->resuming_ports |= bit;
1139 pm_runtime_get_noresume(&bus->root_hub->dev);
1140 }
1141}
1142EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
1143
1144/*
1145 * usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
1146 * @bus: the bus which the root hub belongs to
1147 * @portnum: the port which is being resumed
1148 *
1149 * HCDs should call this function when they know that a resume signal has
1150 * stopped being sent to a root-hub port. The root hub will be allowed to
1151 * autosuspend again.
1152 *
1153 * The bus's private lock must be held by the caller.
1154 */
1155void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
1156{
1157 unsigned bit = 1 << portnum;
1158
1159 if (bus->resuming_ports & bit) {
1160 bus->resuming_ports &= ~bit;
1161 pm_runtime_put_noidle(&bus->root_hub->dev);
1162 }
1163}
1164EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
1165
1166/*-------------------------------------------------------------------------*/
1167
1168/**
1169 * usb_calc_bus_time - approximate periodic transaction time in nanoseconds
1170 * @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
1171 * @is_input: true iff the transaction sends data to the host
1172 * @isoc: true for isochronous transactions, false for interrupt ones
1173 * @bytecount: how many bytes in the transaction.
1174 *
1175 * Return: Approximate bus time in nanoseconds for a periodic transaction.
1176 *
1177 * Note:
1178 * See USB 2.0 spec section 5.11.3; only periodic transfers need to be
1179 * scheduled in software, this function is only used for such scheduling.
1180 */
1181long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
1182{
1183 unsigned long tmp;
1184
1185 switch (speed) {
1186 case USB_SPEED_LOW: /* INTR only */
1187 if (is_input) {
1188 tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
1189 return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1190 } else {
1191 tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
1192 return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
1193 }
1194 case USB_SPEED_FULL: /* ISOC or INTR */
1195 if (isoc) {
1196 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1197 return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
1198 } else {
1199 tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
1200 return 9107L + BW_HOST_DELAY + tmp;
1201 }
1202 case USB_SPEED_HIGH: /* ISOC or INTR */
1203 /* FIXME adjust for input vs output */
1204 if (isoc)
1205 tmp = HS_NSECS_ISO (bytecount);
1206 else
1207 tmp = HS_NSECS (bytecount);
1208 return tmp;
1209 default:
1210 pr_debug ("%s: bogus device speed!\n", usbcore_name);
1211 return -1;
1212 }
1213}
1214EXPORT_SYMBOL_GPL(usb_calc_bus_time);
1215
1216
1217/*-------------------------------------------------------------------------*/
1218
1219/*
1220 * Generic HC operations.
1221 */
1222
1223/*-------------------------------------------------------------------------*/
1224
1225/**
1226 * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
1227 * @hcd: host controller to which @urb was submitted
1228 * @urb: URB being submitted
1229 *
1230 * Host controller drivers should call this routine in their enqueue()
1231 * method. The HCD's private spinlock must be held and interrupts must
1232 * be disabled. The actions carried out here are required for URB
1233 * submission, as well as for endpoint shutdown and for usb_kill_urb.
1234 *
1235 * Return: 0 for no error, otherwise a negative error code (in which case
1236 * the enqueue() method must fail). If no error occurs but enqueue() fails
1237 * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
1238 * the private spinlock and returning.
1239 */
1240int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
1241{
1242 int rc = 0;
1243
1244 spin_lock(&hcd_urb_list_lock);
1245
1246 /* Check that the URB isn't being killed */
1247 if (unlikely(atomic_read(&urb->reject))) {
1248 rc = -EPERM;
1249 goto done;
1250 }
1251
1252 if (unlikely(!urb->ep->enabled)) {
1253 rc = -ENOENT;
1254 goto done;
1255 }
1256
1257 if (unlikely(!urb->dev->can_submit)) {
1258 rc = -EHOSTUNREACH;
1259 goto done;
1260 }
1261
1262 /*
1263 * Check the host controller's state and add the URB to the
1264 * endpoint's queue.
1265 */
1266 if (HCD_RH_RUNNING(hcd)) {
1267 urb->unlinked = 0;
1268 list_add_tail(&urb->urb_list, &urb->ep->urb_list);
1269 } else {
1270 rc = -ESHUTDOWN;
1271 goto done;
1272 }
1273 done:
1274 spin_unlock(&hcd_urb_list_lock);
1275 return rc;
1276}
1277EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
1278
1279/**
1280 * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
1281 * @hcd: host controller to which @urb was submitted
1282 * @urb: URB being checked for unlinkability
1283 * @status: error code to store in @urb if the unlink succeeds
1284 *
1285 * Host controller drivers should call this routine in their dequeue()
1286 * method. The HCD's private spinlock must be held and interrupts must
1287 * be disabled. The actions carried out here are required for making
1288 * sure than an unlink is valid.
1289 *
1290 * Return: 0 for no error, otherwise a negative error code (in which case
1291 * the dequeue() method must fail). The possible error codes are:
1292 *
1293 * -EIDRM: @urb was not submitted or has already completed.
1294 * The completion function may not have been called yet.
1295 *
1296 * -EBUSY: @urb has already been unlinked.
1297 */
1298int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
1299 int status)
1300{
1301 struct list_head *tmp;
1302
1303 /* insist the urb is still queued */
1304 list_for_each(tmp, &urb->ep->urb_list) {
1305 if (tmp == &urb->urb_list)
1306 break;
1307 }
1308 if (tmp != &urb->urb_list)
1309 return -EIDRM;
1310
1311 /* Any status except -EINPROGRESS means something already started to
1312 * unlink this URB from the hardware. So there's no more work to do.
1313 */
1314 if (urb->unlinked)
1315 return -EBUSY;
1316 urb->unlinked = status;
1317 return 0;
1318}
1319EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
1320
1321/**
1322 * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
1323 * @hcd: host controller to which @urb was submitted
1324 * @urb: URB being unlinked
1325 *
1326 * Host controller drivers should call this routine before calling
1327 * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
1328 * interrupts must be disabled. The actions carried out here are required
1329 * for URB completion.
1330 */
1331void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
1332{
1333 /* clear all state linking urb to this dev (and hcd) */
1334 spin_lock(&hcd_urb_list_lock);
1335 list_del_init(&urb->urb_list);
1336 spin_unlock(&hcd_urb_list_lock);
1337}
1338EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
1339
1340/*
1341 * Some usb host controllers can only perform dma using a small SRAM area.
1342 * The usb core itself is however optimized for host controllers that can dma
1343 * using regular system memory - like pci devices doing bus mastering.
1344 *
1345 * To support host controllers with limited dma capabilities we provide dma
1346 * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
1347 * For this to work properly the host controller code must first use the
1348 * function dma_declare_coherent_memory() to point out which memory area
1349 * that should be used for dma allocations.
1350 *
1351 * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
1352 * dma using dma_alloc_coherent() which in turn allocates from the memory
1353 * area pointed out with dma_declare_coherent_memory().
1354 *
1355 * So, to summarize...
1356 *
1357 * - We need "local" memory, canonical example being
1358 * a small SRAM on a discrete controller being the
1359 * only memory that the controller can read ...
1360 * (a) "normal" kernel memory is no good, and
1361 * (b) there's not enough to share
1362 *
1363 * - The only *portable* hook for such stuff in the
1364 * DMA framework is dma_declare_coherent_memory()
1365 *
1366 * - So we use that, even though the primary requirement
1367 * is that the memory be "local" (hence addressable
1368 * by that device), not "coherent".
1369 *
1370 */
1371
1372static int hcd_alloc_coherent(struct usb_bus *bus,
1373 gfp_t mem_flags, dma_addr_t *dma_handle,
1374 void **vaddr_handle, size_t size,
1375 enum dma_data_direction dir)
1376{
1377 unsigned char *vaddr;
1378
1379 if (*vaddr_handle == NULL) {
1380 WARN_ON_ONCE(1);
1381 return -EFAULT;
1382 }
1383
1384 vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
1385 mem_flags, dma_handle);
1386 if (!vaddr)
1387 return -ENOMEM;
1388
1389 /*
1390 * Store the virtual address of the buffer at the end
1391 * of the allocated dma buffer. The size of the buffer
1392 * may be uneven so use unaligned functions instead
1393 * of just rounding up. It makes sense to optimize for
1394 * memory footprint over access speed since the amount
1395 * of memory available for dma may be limited.
1396 */
1397 put_unaligned((unsigned long)*vaddr_handle,
1398 (unsigned long *)(vaddr + size));
1399
1400 if (dir == DMA_TO_DEVICE)
1401 memcpy(vaddr, *vaddr_handle, size);
1402
1403 *vaddr_handle = vaddr;
1404 return 0;
1405}
1406
1407static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
1408 void **vaddr_handle, size_t size,
1409 enum dma_data_direction dir)
1410{
1411 unsigned char *vaddr = *vaddr_handle;
1412
1413 vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
1414
1415 if (dir == DMA_FROM_DEVICE)
1416 memcpy(vaddr, *vaddr_handle, size);
1417
1418 hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
1419
1420 *vaddr_handle = vaddr;
1421 *dma_handle = 0;
1422}
1423
1424void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
1425{
1426 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1427 (urb->transfer_flags & URB_SETUP_MAP_SINGLE))
1428 dma_unmap_single(hcd->self.sysdev,
1429 urb->setup_dma,
1430 sizeof(struct usb_ctrlrequest),
1431 DMA_TO_DEVICE);
1432 else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
1433 hcd_free_coherent(urb->dev->bus,
1434 &urb->setup_dma,
1435 (void **) &urb->setup_packet,
1436 sizeof(struct usb_ctrlrequest),
1437 DMA_TO_DEVICE);
1438
1439 /* Make it safe to call this routine more than once */
1440 urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
1441}
1442EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
1443
1444static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1445{
1446 if (hcd->driver->unmap_urb_for_dma)
1447 hcd->driver->unmap_urb_for_dma(hcd, urb);
1448 else
1449 usb_hcd_unmap_urb_for_dma(hcd, urb);
1450}
1451
1452void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
1453{
1454 enum dma_data_direction dir;
1455
1456 usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
1457
1458 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1459 if (IS_ENABLED(CONFIG_HAS_DMA) &&
1460 (urb->transfer_flags & URB_DMA_MAP_SG))
1461 dma_unmap_sg(hcd->self.sysdev,
1462 urb->sg,
1463 urb->num_sgs,
1464 dir);
1465 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1466 (urb->transfer_flags & URB_DMA_MAP_PAGE))
1467 dma_unmap_page(hcd->self.sysdev,
1468 urb->transfer_dma,
1469 urb->transfer_buffer_length,
1470 dir);
1471 else if (IS_ENABLED(CONFIG_HAS_DMA) &&
1472 (urb->transfer_flags & URB_DMA_MAP_SINGLE))
1473 dma_unmap_single(hcd->self.sysdev,
1474 urb->transfer_dma,
1475 urb->transfer_buffer_length,
1476 dir);
1477 else if (urb->transfer_flags & URB_MAP_LOCAL)
1478 hcd_free_coherent(urb->dev->bus,
1479 &urb->transfer_dma,
1480 &urb->transfer_buffer,
1481 urb->transfer_buffer_length,
1482 dir);
1483
1484 /* Make it safe to call this routine more than once */
1485 urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
1486 URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
1487}
1488EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
1489
1490static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1491 gfp_t mem_flags)
1492{
1493 if (hcd->driver->map_urb_for_dma)
1494 return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
1495 else
1496 return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
1497}
1498
1499int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
1500 gfp_t mem_flags)
1501{
1502 enum dma_data_direction dir;
1503 int ret = 0;
1504
1505 /* Map the URB's buffers for DMA access.
1506 * Lower level HCD code should use *_dma exclusively,
1507 * unless it uses pio or talks to another transport,
1508 * or uses the provided scatter gather list for bulk.
1509 */
1510
1511 if (usb_endpoint_xfer_control(&urb->ep->desc)) {
1512 if (hcd->self.uses_pio_for_control)
1513 return ret;
1514 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1515 if (is_vmalloc_addr(urb->setup_packet)) {
1516 WARN_ONCE(1, "setup packet is not dma capable\n");
1517 return -EAGAIN;
1518 } else if (object_is_on_stack(urb->setup_packet)) {
1519 WARN_ONCE(1, "setup packet is on stack\n");
1520 return -EAGAIN;
1521 }
1522
1523 urb->setup_dma = dma_map_single(
1524 hcd->self.sysdev,
1525 urb->setup_packet,
1526 sizeof(struct usb_ctrlrequest),
1527 DMA_TO_DEVICE);
1528 if (dma_mapping_error(hcd->self.sysdev,
1529 urb->setup_dma))
1530 return -EAGAIN;
1531 urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
1532 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1533 ret = hcd_alloc_coherent(
1534 urb->dev->bus, mem_flags,
1535 &urb->setup_dma,
1536 (void **)&urb->setup_packet,
1537 sizeof(struct usb_ctrlrequest),
1538 DMA_TO_DEVICE);
1539 if (ret)
1540 return ret;
1541 urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
1542 }
1543 }
1544
1545 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
1546 if (urb->transfer_buffer_length != 0
1547 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
1548 if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
1549 if (urb->num_sgs) {
1550 int n;
1551
1552 /* We don't support sg for isoc transfers ! */
1553 if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
1554 WARN_ON(1);
1555 return -EINVAL;
1556 }
1557
1558 n = dma_map_sg(
1559 hcd->self.sysdev,
1560 urb->sg,
1561 urb->num_sgs,
1562 dir);
1563 if (n <= 0)
1564 ret = -EAGAIN;
1565 else
1566 urb->transfer_flags |= URB_DMA_MAP_SG;
1567 urb->num_mapped_sgs = n;
1568 if (n != urb->num_sgs)
1569 urb->transfer_flags |=
1570 URB_DMA_SG_COMBINED;
1571 } else if (urb->sg) {
1572 struct scatterlist *sg = urb->sg;
1573 urb->transfer_dma = dma_map_page(
1574 hcd->self.sysdev,
1575 sg_page(sg),
1576 sg->offset,
1577 urb->transfer_buffer_length,
1578 dir);
1579 if (dma_mapping_error(hcd->self.sysdev,
1580 urb->transfer_dma))
1581 ret = -EAGAIN;
1582 else
1583 urb->transfer_flags |= URB_DMA_MAP_PAGE;
1584 } else if (is_vmalloc_addr(urb->transfer_buffer)) {
1585 WARN_ONCE(1, "transfer buffer not dma capable\n");
1586 ret = -EAGAIN;
1587 } else if (object_is_on_stack(urb->transfer_buffer)) {
1588 WARN_ONCE(1, "transfer buffer is on stack\n");
1589 ret = -EAGAIN;
1590 } else {
1591 urb->transfer_dma = dma_map_single(
1592 hcd->self.sysdev,
1593 urb->transfer_buffer,
1594 urb->transfer_buffer_length,
1595 dir);
1596 if (dma_mapping_error(hcd->self.sysdev,
1597 urb->transfer_dma))
1598 ret = -EAGAIN;
1599 else
1600 urb->transfer_flags |= URB_DMA_MAP_SINGLE;
1601 }
1602 } else if (hcd->driver->flags & HCD_LOCAL_MEM) {
1603 ret = hcd_alloc_coherent(
1604 urb->dev->bus, mem_flags,
1605 &urb->transfer_dma,
1606 &urb->transfer_buffer,
1607 urb->transfer_buffer_length,
1608 dir);
1609 if (ret == 0)
1610 urb->transfer_flags |= URB_MAP_LOCAL;
1611 }
1612 if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
1613 URB_SETUP_MAP_LOCAL)))
1614 usb_hcd_unmap_urb_for_dma(hcd, urb);
1615 }
1616 return ret;
1617}
1618EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
1619
1620/*-------------------------------------------------------------------------*/
1621
1622/* may be called in any context with a valid urb->dev usecount
1623 * caller surrenders "ownership" of urb
1624 * expects usb_submit_urb() to have sanity checked and conditioned all
1625 * inputs in the urb
1626 */
1627int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
1628{
1629 int status;
1630 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1631
1632 /* increment urb's reference count as part of giving it to the HCD
1633 * (which will control it). HCD guarantees that it either returns
1634 * an error or calls giveback(), but not both.
1635 */
1636 usb_get_urb(urb);
1637 atomic_inc(&urb->use_count);
1638 atomic_inc(&urb->dev->urbnum);
1639 usbmon_urb_submit(&hcd->self, urb);
1640
1641 /* NOTE requirements on root-hub callers (usbfs and the hub
1642 * driver, for now): URBs' urb->transfer_buffer must be
1643 * valid and usb_buffer_{sync,unmap}() not be needed, since
1644 * they could clobber root hub response data. Also, control
1645 * URBs must be submitted in process context with interrupts
1646 * enabled.
1647 */
1648
1649 if (is_root_hub(urb->dev)) {
1650 status = rh_urb_enqueue(hcd, urb);
1651 } else {
1652 status = map_urb_for_dma(hcd, urb, mem_flags);
1653 if (likely(status == 0)) {
1654 status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
1655 if (unlikely(status))
1656 unmap_urb_for_dma(hcd, urb);
1657 }
1658 }
1659
1660 if (unlikely(status)) {
1661 usbmon_urb_submit_error(&hcd->self, urb, status);
1662 urb->hcpriv = NULL;
1663 INIT_LIST_HEAD(&urb->urb_list);
1664 atomic_dec(&urb->use_count);
1665 atomic_dec(&urb->dev->urbnum);
1666 if (atomic_read(&urb->reject))
1667 wake_up(&usb_kill_urb_queue);
1668 usb_put_urb(urb);
1669 }
1670 return status;
1671}
1672
1673/*-------------------------------------------------------------------------*/
1674
1675/* this makes the hcd giveback() the urb more quickly, by kicking it
1676 * off hardware queues (which may take a while) and returning it as
1677 * soon as practical. we've already set up the urb's return status,
1678 * but we can't know if the callback completed already.
1679 */
1680static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
1681{
1682 int value;
1683
1684 if (is_root_hub(urb->dev))
1685 value = usb_rh_urb_dequeue(hcd, urb, status);
1686 else {
1687
1688 /* The only reason an HCD might fail this call is if
1689 * it has not yet fully queued the urb to begin with.
1690 * Such failures should be harmless. */
1691 value = hcd->driver->urb_dequeue(hcd, urb, status);
1692 }
1693 return value;
1694}
1695
1696/*
1697 * called in any context
1698 *
1699 * caller guarantees urb won't be recycled till both unlink()
1700 * and the urb's completion function return
1701 */
1702int usb_hcd_unlink_urb (struct urb *urb, int status)
1703{
1704 struct usb_hcd *hcd;
1705 struct usb_device *udev = urb->dev;
1706 int retval = -EIDRM;
1707 unsigned long flags;
1708
1709 /* Prevent the device and bus from going away while
1710 * the unlink is carried out. If they are already gone
1711 * then urb->use_count must be 0, since disconnected
1712 * devices can't have any active URBs.
1713 */
1714 spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
1715 if (atomic_read(&urb->use_count) > 0) {
1716 retval = 0;
1717 usb_get_dev(udev);
1718 }
1719 spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
1720 if (retval == 0) {
1721 hcd = bus_to_hcd(urb->dev->bus);
1722 retval = unlink1(hcd, urb, status);
1723 if (retval == 0)
1724 retval = -EINPROGRESS;
1725 else if (retval != -EIDRM && retval != -EBUSY)
1726 dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
1727 urb, retval);
1728 usb_put_dev(udev);
1729 }
1730 return retval;
1731}
1732
1733/*-------------------------------------------------------------------------*/
1734
1735static void __usb_hcd_giveback_urb(struct urb *urb)
1736{
1737 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
1738 struct usb_anchor *anchor = urb->anchor;
1739 int status = urb->unlinked;
1740 unsigned long flags;
1741
1742 urb->hcpriv = NULL;
1743 if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
1744 urb->actual_length < urb->transfer_buffer_length &&
1745 !status))
1746 status = -EREMOTEIO;
1747
1748 unmap_urb_for_dma(hcd, urb);
1749 usbmon_urb_complete(&hcd->self, urb, status);
1750 usb_anchor_suspend_wakeups(anchor);
1751 usb_unanchor_urb(urb);
1752 if (likely(status == 0))
1753 usb_led_activity(USB_LED_EVENT_HOST);
1754
1755 /* pass ownership to the completion handler */
1756 urb->status = status;
1757
1758 /*
1759 * We disable local IRQs here avoid possible deadlock because
1760 * drivers may call spin_lock() to hold lock which might be
1761 * acquired in one hard interrupt handler.
1762 *
1763 * The local_irq_save()/local_irq_restore() around complete()
1764 * will be removed if current USB drivers have been cleaned up
1765 * and no one may trigger the above deadlock situation when
1766 * running complete() in tasklet.
1767 */
1768 local_irq_save(flags);
1769 urb->complete(urb);
1770 local_irq_restore(flags);
1771
1772 usb_anchor_resume_wakeups(anchor);
1773 atomic_dec(&urb->use_count);
1774 if (unlikely(atomic_read(&urb->reject)))
1775 wake_up(&usb_kill_urb_queue);
1776 usb_put_urb(urb);
1777}
1778
1779static void usb_giveback_urb_bh(unsigned long param)
1780{
1781 struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
1782 struct list_head local_list;
1783
1784 spin_lock_irq(&bh->lock);
1785 bh->running = true;
1786 restart:
1787 list_replace_init(&bh->head, &local_list);
1788 spin_unlock_irq(&bh->lock);
1789
1790 while (!list_empty(&local_list)) {
1791 struct urb *urb;
1792
1793 urb = list_entry(local_list.next, struct urb, urb_list);
1794 list_del_init(&urb->urb_list);
1795 bh->completing_ep = urb->ep;
1796 __usb_hcd_giveback_urb(urb);
1797 bh->completing_ep = NULL;
1798 }
1799
1800 /* check if there are new URBs to giveback */
1801 spin_lock_irq(&bh->lock);
1802 if (!list_empty(&bh->head))
1803 goto restart;
1804 bh->running = false;
1805 spin_unlock_irq(&bh->lock);
1806}
1807
1808/**
1809 * usb_hcd_giveback_urb - return URB from HCD to device driver
1810 * @hcd: host controller returning the URB
1811 * @urb: urb being returned to the USB device driver.
1812 * @status: completion status code for the URB.
1813 * Context: in_interrupt()
1814 *
1815 * This hands the URB from HCD to its USB device driver, using its
1816 * completion function. The HCD has freed all per-urb resources
1817 * (and is done using urb->hcpriv). It also released all HCD locks;
1818 * the device driver won't cause problems if it frees, modifies,
1819 * or resubmits this URB.
1820 *
1821 * If @urb was unlinked, the value of @status will be overridden by
1822 * @urb->unlinked. Erroneous short transfers are detected in case
1823 * the HCD hasn't checked for them.
1824 */
1825void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
1826{
1827 struct giveback_urb_bh *bh;
1828 bool running, high_prio_bh;
1829
1830 /* pass status to tasklet via unlinked */
1831 if (likely(!urb->unlinked))
1832 urb->unlinked = status;
1833
1834 if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
1835 __usb_hcd_giveback_urb(urb);
1836 return;
1837 }
1838
1839 if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
1840 bh = &hcd->high_prio_bh;
1841 high_prio_bh = true;
1842 } else {
1843 bh = &hcd->low_prio_bh;
1844 high_prio_bh = false;
1845 }
1846
1847 spin_lock(&bh->lock);
1848 list_add_tail(&urb->urb_list, &bh->head);
1849 running = bh->running;
1850 spin_unlock(&bh->lock);
1851
1852 if (running)
1853 ;
1854 else if (high_prio_bh)
1855 tasklet_hi_schedule(&bh->bh);
1856 else
1857 tasklet_schedule(&bh->bh);
1858}
1859EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
1860
1861/*-------------------------------------------------------------------------*/
1862
1863/* Cancel all URBs pending on this endpoint and wait for the endpoint's
1864 * queue to drain completely. The caller must first insure that no more
1865 * URBs can be submitted for this endpoint.
1866 */
1867void usb_hcd_flush_endpoint(struct usb_device *udev,
1868 struct usb_host_endpoint *ep)
1869{
1870 struct usb_hcd *hcd;
1871 struct urb *urb;
1872
1873 if (!ep)
1874 return;
1875 might_sleep();
1876 hcd = bus_to_hcd(udev->bus);
1877
1878 /* No more submits can occur */
1879 spin_lock_irq(&hcd_urb_list_lock);
1880rescan:
1881 list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
1882 int is_in;
1883
1884 if (urb->unlinked)
1885 continue;
1886 usb_get_urb (urb);
1887 is_in = usb_urb_dir_in(urb);
1888 spin_unlock(&hcd_urb_list_lock);
1889
1890 /* kick hcd */
1891 unlink1(hcd, urb, -ESHUTDOWN);
1892 dev_dbg (hcd->self.controller,
1893 "shutdown urb %pK ep%d%s%s\n",
1894 urb, usb_endpoint_num(&ep->desc),
1895 is_in ? "in" : "out",
1896 ({ char *s;
1897
1898 switch (usb_endpoint_type(&ep->desc)) {
1899 case USB_ENDPOINT_XFER_CONTROL:
1900 s = ""; break;
1901 case USB_ENDPOINT_XFER_BULK:
1902 s = "-bulk"; break;
1903 case USB_ENDPOINT_XFER_INT:
1904 s = "-intr"; break;
1905 default:
1906 s = "-iso"; break;
1907 };
1908 s;
1909 }));
1910 usb_put_urb (urb);
1911
1912 /* list contents may have changed */
1913 spin_lock(&hcd_urb_list_lock);
1914 goto rescan;
1915 }
1916 spin_unlock_irq(&hcd_urb_list_lock);
1917
1918 /* Wait until the endpoint queue is completely empty */
1919 while (!list_empty (&ep->urb_list)) {
1920 spin_lock_irq(&hcd_urb_list_lock);
1921
1922 /* The list may have changed while we acquired the spinlock */
1923 urb = NULL;
1924 if (!list_empty (&ep->urb_list)) {
1925 urb = list_entry (ep->urb_list.prev, struct urb,
1926 urb_list);
1927 usb_get_urb (urb);
1928 }
1929 spin_unlock_irq(&hcd_urb_list_lock);
1930
1931 if (urb) {
1932 usb_kill_urb (urb);
1933 usb_put_urb (urb);
1934 }
1935 }
1936}
1937
1938/**
1939 * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
1940 * the bus bandwidth
1941 * @udev: target &usb_device
1942 * @new_config: new configuration to install
1943 * @cur_alt: the current alternate interface setting
1944 * @new_alt: alternate interface setting that is being installed
1945 *
1946 * To change configurations, pass in the new configuration in new_config,
1947 * and pass NULL for cur_alt and new_alt.
1948 *
1949 * To reset a device's configuration (put the device in the ADDRESSED state),
1950 * pass in NULL for new_config, cur_alt, and new_alt.
1951 *
1952 * To change alternate interface settings, pass in NULL for new_config,
1953 * pass in the current alternate interface setting in cur_alt,
1954 * and pass in the new alternate interface setting in new_alt.
1955 *
1956 * Return: An error if the requested bandwidth change exceeds the
1957 * bus bandwidth or host controller internal resources.
1958 */
1959int usb_hcd_alloc_bandwidth(struct usb_device *udev,
1960 struct usb_host_config *new_config,
1961 struct usb_host_interface *cur_alt,
1962 struct usb_host_interface *new_alt)
1963{
1964 int num_intfs, i, j;
1965 struct usb_host_interface *alt = NULL;
1966 int ret = 0;
1967 struct usb_hcd *hcd;
1968 struct usb_host_endpoint *ep;
1969
1970 hcd = bus_to_hcd(udev->bus);
1971 if (!hcd->driver->check_bandwidth)
1972 return 0;
1973
1974 /* Configuration is being removed - set configuration 0 */
1975 if (!new_config && !cur_alt) {
1976 for (i = 1; i < 16; ++i) {
1977 ep = udev->ep_out[i];
1978 if (ep)
1979 hcd->driver->drop_endpoint(hcd, udev, ep);
1980 ep = udev->ep_in[i];
1981 if (ep)
1982 hcd->driver->drop_endpoint(hcd, udev, ep);
1983 }
1984 hcd->driver->check_bandwidth(hcd, udev);
1985 return 0;
1986 }
1987 /* Check if the HCD says there's enough bandwidth. Enable all endpoints
1988 * each interface's alt setting 0 and ask the HCD to check the bandwidth
1989 * of the bus. There will always be bandwidth for endpoint 0, so it's
1990 * ok to exclude it.
1991 */
1992 if (new_config) {
1993 num_intfs = new_config->desc.bNumInterfaces;
1994 /* Remove endpoints (except endpoint 0, which is always on the
1995 * schedule) from the old config from the schedule
1996 */
1997 for (i = 1; i < 16; ++i) {
1998 ep = udev->ep_out[i];
1999 if (ep) {
2000 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
2001 if (ret < 0)
2002 goto reset;
2003 }
2004 ep = udev->ep_in[i];
2005 if (ep) {
2006 ret = hcd->driver->drop_endpoint(hcd, udev, ep);
2007 if (ret < 0)
2008 goto reset;
2009 }
2010 }
2011 for (i = 0; i < num_intfs; ++i) {
2012 struct usb_host_interface *first_alt;
2013 int iface_num;
2014
2015 first_alt = &new_config->intf_cache[i]->altsetting[0];
2016 iface_num = first_alt->desc.bInterfaceNumber;
2017 /* Set up endpoints for alternate interface setting 0 */
2018 alt = usb_find_alt_setting(new_config, iface_num, 0);
2019 if (!alt)
2020 /* No alt setting 0? Pick the first setting. */
2021 alt = first_alt;
2022
2023 for (j = 0; j < alt->desc.bNumEndpoints; j++) {
2024 ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
2025 if (ret < 0)
2026 goto reset;
2027 }
2028 }
2029 }
2030 if (cur_alt && new_alt) {
2031 struct usb_interface *iface = usb_ifnum_to_if(udev,
2032 cur_alt->desc.bInterfaceNumber);
2033
2034 if (!iface)
2035 return -EINVAL;
2036 if (iface->resetting_device) {
2037 /*
2038 * The USB core just reset the device, so the xHCI host
2039 * and the device will think alt setting 0 is installed.
2040 * However, the USB core will pass in the alternate
2041 * setting installed before the reset as cur_alt. Dig
2042 * out the alternate setting 0 structure, or the first
2043 * alternate setting if a broken device doesn't have alt
2044 * setting 0.
2045 */
2046 cur_alt = usb_altnum_to_altsetting(iface, 0);
2047 if (!cur_alt)
2048 cur_alt = &iface->altsetting[0];
2049 }
2050
2051 /* Drop all the endpoints in the current alt setting */
2052 for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
2053 ret = hcd->driver->drop_endpoint(hcd, udev,
2054 &cur_alt->endpoint[i]);
2055 if (ret < 0)
2056 goto reset;
2057 }
2058 /* Add all the endpoints in the new alt setting */
2059 for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
2060 ret = hcd->driver->add_endpoint(hcd, udev,
2061 &new_alt->endpoint[i]);
2062 if (ret < 0)
2063 goto reset;
2064 }
2065 }
2066 ret = hcd->driver->check_bandwidth(hcd, udev);
2067reset:
2068 if (ret < 0)
2069 hcd->driver->reset_bandwidth(hcd, udev);
2070 return ret;
2071}
2072
2073/* Disables the endpoint: synchronizes with the hcd to make sure all
2074 * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
2075 * have been called previously. Use for set_configuration, set_interface,
2076 * driver removal, physical disconnect.
2077 *
2078 * example: a qh stored in ep->hcpriv, holding state related to endpoint
2079 * type, maxpacket size, toggle, halt status, and scheduling.
2080 */
2081void usb_hcd_disable_endpoint(struct usb_device *udev,
2082 struct usb_host_endpoint *ep)
2083{
2084 struct usb_hcd *hcd;
2085
2086 might_sleep();
2087 hcd = bus_to_hcd(udev->bus);
2088 if (hcd->driver->endpoint_disable)
2089 hcd->driver->endpoint_disable(hcd, ep);
2090}
2091
2092/**
2093 * usb_hcd_reset_endpoint - reset host endpoint state
2094 * @udev: USB device.
2095 * @ep: the endpoint to reset.
2096 *
2097 * Resets any host endpoint state such as the toggle bit, sequence
2098 * number and current window.
2099 */
2100void usb_hcd_reset_endpoint(struct usb_device *udev,
2101 struct usb_host_endpoint *ep)
2102{
2103 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2104
2105 if (hcd->driver->endpoint_reset)
2106 hcd->driver->endpoint_reset(hcd, ep);
2107 else {
2108 int epnum = usb_endpoint_num(&ep->desc);
2109 int is_out = usb_endpoint_dir_out(&ep->desc);
2110 int is_control = usb_endpoint_xfer_control(&ep->desc);
2111
2112 usb_settoggle(udev, epnum, is_out, 0);
2113 if (is_control)
2114 usb_settoggle(udev, epnum, !is_out, 0);
2115 }
2116}
2117
2118/**
2119 * usb_alloc_streams - allocate bulk endpoint stream IDs.
2120 * @interface: alternate setting that includes all endpoints.
2121 * @eps: array of endpoints that need streams.
2122 * @num_eps: number of endpoints in the array.
2123 * @num_streams: number of streams to allocate.
2124 * @mem_flags: flags hcd should use to allocate memory.
2125 *
2126 * Sets up a group of bulk endpoints to have @num_streams stream IDs available.
2127 * Drivers may queue multiple transfers to different stream IDs, which may
2128 * complete in a different order than they were queued.
2129 *
2130 * Return: On success, the number of allocated streams. On failure, a negative
2131 * error code.
2132 */
2133int usb_alloc_streams(struct usb_interface *interface,
2134 struct usb_host_endpoint **eps, unsigned int num_eps,
2135 unsigned int num_streams, gfp_t mem_flags)
2136{
2137 struct usb_hcd *hcd;
2138 struct usb_device *dev;
2139 int i, ret;
2140
2141 dev = interface_to_usbdev(interface);
2142 hcd = bus_to_hcd(dev->bus);
2143 if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
2144 return -EINVAL;
2145 if (dev->speed < USB_SPEED_SUPER)
2146 return -EINVAL;
2147 if (dev->state < USB_STATE_CONFIGURED)
2148 return -ENODEV;
2149
2150 for (i = 0; i < num_eps; i++) {
2151 /* Streams only apply to bulk endpoints. */
2152 if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
2153 return -EINVAL;
2154 /* Re-alloc is not allowed */
2155 if (eps[i]->streams)
2156 return -EINVAL;
2157 }
2158
2159 ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
2160 num_streams, mem_flags);
2161 if (ret < 0)
2162 return ret;
2163
2164 for (i = 0; i < num_eps; i++)
2165 eps[i]->streams = ret;
2166
2167 return ret;
2168}
2169EXPORT_SYMBOL_GPL(usb_alloc_streams);
2170
2171/**
2172 * usb_free_streams - free bulk endpoint stream IDs.
2173 * @interface: alternate setting that includes all endpoints.
2174 * @eps: array of endpoints to remove streams from.
2175 * @num_eps: number of endpoints in the array.
2176 * @mem_flags: flags hcd should use to allocate memory.
2177 *
2178 * Reverts a group of bulk endpoints back to not using stream IDs.
2179 * Can fail if we are given bad arguments, or HCD is broken.
2180 *
2181 * Return: 0 on success. On failure, a negative error code.
2182 */
2183int usb_free_streams(struct usb_interface *interface,
2184 struct usb_host_endpoint **eps, unsigned int num_eps,
2185 gfp_t mem_flags)
2186{
2187 struct usb_hcd *hcd;
2188 struct usb_device *dev;
2189 int i, ret;
2190
2191 dev = interface_to_usbdev(interface);
2192 hcd = bus_to_hcd(dev->bus);
2193 if (dev->speed < USB_SPEED_SUPER)
2194 return -EINVAL;
2195
2196 /* Double-free is not allowed */
2197 for (i = 0; i < num_eps; i++)
2198 if (!eps[i] || !eps[i]->streams)
2199 return -EINVAL;
2200
2201 ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
2202 if (ret < 0)
2203 return ret;
2204
2205 for (i = 0; i < num_eps; i++)
2206 eps[i]->streams = 0;
2207
2208 return ret;
2209}
2210EXPORT_SYMBOL_GPL(usb_free_streams);
2211
2212/* Protect against drivers that try to unlink URBs after the device
2213 * is gone, by waiting until all unlinks for @udev are finished.
2214 * Since we don't currently track URBs by device, simply wait until
2215 * nothing is running in the locked region of usb_hcd_unlink_urb().
2216 */
2217void usb_hcd_synchronize_unlinks(struct usb_device *udev)
2218{
2219 spin_lock_irq(&hcd_urb_unlink_lock);
2220 spin_unlock_irq(&hcd_urb_unlink_lock);
2221}
2222
2223/*-------------------------------------------------------------------------*/
2224
2225/* called in any context */
2226int usb_hcd_get_frame_number (struct usb_device *udev)
2227{
2228 struct usb_hcd *hcd = bus_to_hcd(udev->bus);
2229
2230 if (!HCD_RH_RUNNING(hcd))
2231 return -ESHUTDOWN;
2232 return hcd->driver->get_frame_number (hcd);
2233}
2234
2235/*-------------------------------------------------------------------------*/
2236
2237#ifdef CONFIG_PM
2238
2239int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
2240{
2241 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2242 int status;
2243 int old_state = hcd->state;
2244
2245 dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
2246 (PMSG_IS_AUTO(msg) ? "auto-" : ""),
2247 rhdev->do_remote_wakeup);
2248 if (HCD_DEAD(hcd)) {
2249 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
2250 return 0;
2251 }
2252
2253 if (!hcd->driver->bus_suspend) {
2254 status = -ENOENT;
2255 } else {
2256 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2257 hcd->state = HC_STATE_QUIESCING;
2258 status = hcd->driver->bus_suspend(hcd);
2259 }
2260 if (status == 0) {
2261 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
2262 hcd->state = HC_STATE_SUSPENDED;
2263
2264 if (!PMSG_IS_AUTO(msg))
2265 usb_phy_roothub_suspend(hcd->self.sysdev,
2266 hcd->phy_roothub);
2267
2268 /* Did we race with a root-hub wakeup event? */
2269 if (rhdev->do_remote_wakeup) {
2270 char buffer[6];
2271
2272 status = hcd->driver->hub_status_data(hcd, buffer);
2273 if (status != 0) {
2274 dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
2275 hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
2276 status = -EBUSY;
2277 }
2278 }
2279 } else {
2280 spin_lock_irq(&hcd_root_hub_lock);
2281 if (!HCD_DEAD(hcd)) {
2282 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2283 hcd->state = old_state;
2284 }
2285 spin_unlock_irq(&hcd_root_hub_lock);
2286 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2287 "suspend", status);
2288 }
2289 return status;
2290}
2291
2292int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
2293{
2294 struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
2295 int status;
2296 int old_state = hcd->state;
2297
2298 dev_dbg(&rhdev->dev, "usb %sresume\n",
2299 (PMSG_IS_AUTO(msg) ? "auto-" : ""));
2300 if (HCD_DEAD(hcd)) {
2301 dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
2302 return 0;
2303 }
2304
2305 if (!PMSG_IS_AUTO(msg)) {
2306 status = usb_phy_roothub_resume(hcd->self.sysdev,
2307 hcd->phy_roothub);
2308 if (status)
2309 return status;
2310 }
2311
2312 if (!hcd->driver->bus_resume)
2313 return -ENOENT;
2314 if (HCD_RH_RUNNING(hcd))
2315 return 0;
2316
2317 hcd->state = HC_STATE_RESUMING;
2318 status = hcd->driver->bus_resume(hcd);
2319 clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2320 if (status == 0) {
2321 struct usb_device *udev;
2322 int port1;
2323
2324 spin_lock_irq(&hcd_root_hub_lock);
2325 if (!HCD_DEAD(hcd)) {
2326 usb_set_device_state(rhdev, rhdev->actconfig
2327 ? USB_STATE_CONFIGURED
2328 : USB_STATE_ADDRESS);
2329 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2330 hcd->state = HC_STATE_RUNNING;
2331 }
2332 spin_unlock_irq(&hcd_root_hub_lock);
2333
2334 /*
2335 * Check whether any of the enabled ports on the root hub are
2336 * unsuspended. If they are then a TRSMRCY delay is needed
2337 * (this is what the USB-2 spec calls a "global resume").
2338 * Otherwise we can skip the delay.
2339 */
2340 usb_hub_for_each_child(rhdev, port1, udev) {
2341 if (udev->state != USB_STATE_NOTATTACHED &&
2342 !udev->port_is_suspended) {
2343 usleep_range(10000, 11000); /* TRSMRCY */
2344 break;
2345 }
2346 }
2347 } else {
2348 hcd->state = old_state;
2349 usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
2350 dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
2351 "resume", status);
2352 if (status != -ESHUTDOWN)
2353 usb_hc_died(hcd);
2354 }
2355 return status;
2356}
2357
2358/* Workqueue routine for root-hub remote wakeup */
2359static void hcd_resume_work(struct work_struct *work)
2360{
2361 struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
2362 struct usb_device *udev = hcd->self.root_hub;
2363
2364 usb_remote_wakeup(udev);
2365}
2366
2367/**
2368 * usb_hcd_resume_root_hub - called by HCD to resume its root hub
2369 * @hcd: host controller for this root hub
2370 *
2371 * The USB host controller calls this function when its root hub is
2372 * suspended (with the remote wakeup feature enabled) and a remote
2373 * wakeup request is received. The routine submits a workqueue request
2374 * to resume the root hub (that is, manage its downstream ports again).
2375 */
2376void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
2377{
2378 unsigned long flags;
2379
2380 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2381 if (hcd->rh_registered) {
2382 pm_wakeup_event(&hcd->self.root_hub->dev, 0);
2383 set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
2384 queue_work(pm_wq, &hcd->wakeup_work);
2385 }
2386 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2387}
2388EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
2389
2390#endif /* CONFIG_PM */
2391
2392/*-------------------------------------------------------------------------*/
2393
2394#ifdef CONFIG_USB_OTG
2395
2396/**
2397 * usb_bus_start_enum - start immediate enumeration (for OTG)
2398 * @bus: the bus (must use hcd framework)
2399 * @port_num: 1-based number of port; usually bus->otg_port
2400 * Context: in_interrupt()
2401 *
2402 * Starts enumeration, with an immediate reset followed later by
2403 * hub_wq identifying and possibly configuring the device.
2404 * This is needed by OTG controller drivers, where it helps meet
2405 * HNP protocol timing requirements for starting a port reset.
2406 *
2407 * Return: 0 if successful.
2408 */
2409int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
2410{
2411 struct usb_hcd *hcd;
2412 int status = -EOPNOTSUPP;
2413
2414 /* NOTE: since HNP can't start by grabbing the bus's address0_sem,
2415 * boards with root hubs hooked up to internal devices (instead of
2416 * just the OTG port) may need more attention to resetting...
2417 */
2418 hcd = bus_to_hcd(bus);
2419 if (port_num && hcd->driver->start_port_reset)
2420 status = hcd->driver->start_port_reset(hcd, port_num);
2421
2422 /* allocate hub_wq shortly after (first) root port reset finishes;
2423 * it may issue others, until at least 50 msecs have passed.
2424 */
2425 if (status == 0)
2426 mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
2427 return status;
2428}
2429EXPORT_SYMBOL_GPL(usb_bus_start_enum);
2430
2431#endif
2432
2433/*-------------------------------------------------------------------------*/
2434
2435/**
2436 * usb_hcd_irq - hook IRQs to HCD framework (bus glue)
2437 * @irq: the IRQ being raised
2438 * @__hcd: pointer to the HCD whose IRQ is being signaled
2439 *
2440 * If the controller isn't HALTed, calls the driver's irq handler.
2441 * Checks whether the controller is now dead.
2442 *
2443 * Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
2444 */
2445irqreturn_t usb_hcd_irq (int irq, void *__hcd)
2446{
2447 struct usb_hcd *hcd = __hcd;
2448 irqreturn_t rc;
2449
2450 if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
2451 rc = IRQ_NONE;
2452 else if (hcd->driver->irq(hcd) == IRQ_NONE)
2453 rc = IRQ_NONE;
2454 else
2455 rc = IRQ_HANDLED;
2456
2457 return rc;
2458}
2459EXPORT_SYMBOL_GPL(usb_hcd_irq);
2460
2461/*-------------------------------------------------------------------------*/
2462
2463/**
2464 * usb_hc_died - report abnormal shutdown of a host controller (bus glue)
2465 * @hcd: pointer to the HCD representing the controller
2466 *
2467 * This is called by bus glue to report a USB host controller that died
2468 * while operations may still have been pending. It's called automatically
2469 * by the PCI glue, so only glue for non-PCI busses should need to call it.
2470 *
2471 * Only call this function with the primary HCD.
2472 */
2473void usb_hc_died (struct usb_hcd *hcd)
2474{
2475 unsigned long flags;
2476
2477 dev_err (hcd->self.controller, "HC died; cleaning up\n");
2478
2479 spin_lock_irqsave (&hcd_root_hub_lock, flags);
2480 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2481 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2482 if (hcd->rh_registered) {
2483 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2484
2485 /* make hub_wq clean up old urbs and devices */
2486 usb_set_device_state (hcd->self.root_hub,
2487 USB_STATE_NOTATTACHED);
2488 usb_kick_hub_wq(hcd->self.root_hub);
2489 }
2490 if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
2491 hcd = hcd->shared_hcd;
2492 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2493 set_bit(HCD_FLAG_DEAD, &hcd->flags);
2494 if (hcd->rh_registered) {
2495 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2496
2497 /* make hub_wq clean up old urbs and devices */
2498 usb_set_device_state(hcd->self.root_hub,
2499 USB_STATE_NOTATTACHED);
2500 usb_kick_hub_wq(hcd->self.root_hub);
2501 }
2502 }
2503 spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
2504 /* Make sure that the other roothub is also deallocated. */
2505}
2506EXPORT_SYMBOL_GPL (usb_hc_died);
2507
2508/*-------------------------------------------------------------------------*/
2509
2510static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
2511{
2512
2513 spin_lock_init(&bh->lock);
2514 INIT_LIST_HEAD(&bh->head);
2515 tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
2516}
2517
2518struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
2519 struct device *sysdev, struct device *dev, const char *bus_name,
2520 struct usb_hcd *primary_hcd)
2521{
2522 struct usb_hcd *hcd;
2523
2524 hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
2525 if (!hcd)
2526 return NULL;
2527 if (primary_hcd == NULL) {
2528 hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
2529 GFP_KERNEL);
2530 if (!hcd->address0_mutex) {
2531 kfree(hcd);
2532 dev_dbg(dev, "hcd address0 mutex alloc failed\n");
2533 return NULL;
2534 }
2535 mutex_init(hcd->address0_mutex);
2536 hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
2537 GFP_KERNEL);
2538 if (!hcd->bandwidth_mutex) {
2539 kfree(hcd->address0_mutex);
2540 kfree(hcd);
2541 dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
2542 return NULL;
2543 }
2544 mutex_init(hcd->bandwidth_mutex);
2545 dev_set_drvdata(dev, hcd);
2546 } else {
2547 mutex_lock(&usb_port_peer_mutex);
2548 hcd->address0_mutex = primary_hcd->address0_mutex;
2549 hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
2550 hcd->primary_hcd = primary_hcd;
2551 primary_hcd->primary_hcd = primary_hcd;
2552 hcd->shared_hcd = primary_hcd;
2553 primary_hcd->shared_hcd = hcd;
2554 mutex_unlock(&usb_port_peer_mutex);
2555 }
2556
2557 kref_init(&hcd->kref);
2558
2559 usb_bus_init(&hcd->self);
2560 hcd->self.controller = dev;
2561 hcd->self.sysdev = sysdev;
2562 hcd->self.bus_name = bus_name;
2563 hcd->self.uses_dma = (sysdev->dma_mask != NULL);
2564
2565 timer_setup(&hcd->rh_timer, rh_timer_func, 0);
2566#ifdef CONFIG_PM
2567 INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
2568#endif
2569
2570 hcd->driver = driver;
2571 hcd->speed = driver->flags & HCD_MASK;
2572 hcd->product_desc = (driver->product_desc) ? driver->product_desc :
2573 "USB Host Controller";
2574 return hcd;
2575}
2576EXPORT_SYMBOL_GPL(__usb_create_hcd);
2577
2578/**
2579 * usb_create_shared_hcd - create and initialize an HCD structure
2580 * @driver: HC driver that will use this hcd
2581 * @dev: device for this HC, stored in hcd->self.controller
2582 * @bus_name: value to store in hcd->self.bus_name
2583 * @primary_hcd: a pointer to the usb_hcd structure that is sharing the
2584 * PCI device. Only allocate certain resources for the primary HCD
2585 * Context: !in_interrupt()
2586 *
2587 * Allocate a struct usb_hcd, with extra space at the end for the
2588 * HC driver's private data. Initialize the generic members of the
2589 * hcd structure.
2590 *
2591 * Return: On success, a pointer to the created and initialized HCD structure.
2592 * On failure (e.g. if memory is unavailable), %NULL.
2593 */
2594struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
2595 struct device *dev, const char *bus_name,
2596 struct usb_hcd *primary_hcd)
2597{
2598 return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
2599}
2600EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
2601
2602/**
2603 * usb_create_hcd - create and initialize an HCD structure
2604 * @driver: HC driver that will use this hcd
2605 * @dev: device for this HC, stored in hcd->self.controller
2606 * @bus_name: value to store in hcd->self.bus_name
2607 * Context: !in_interrupt()
2608 *
2609 * Allocate a struct usb_hcd, with extra space at the end for the
2610 * HC driver's private data. Initialize the generic members of the
2611 * hcd structure.
2612 *
2613 * Return: On success, a pointer to the created and initialized HCD
2614 * structure. On failure (e.g. if memory is unavailable), %NULL.
2615 */
2616struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
2617 struct device *dev, const char *bus_name)
2618{
2619 return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
2620}
2621EXPORT_SYMBOL_GPL(usb_create_hcd);
2622
2623/*
2624 * Roothubs that share one PCI device must also share the bandwidth mutex.
2625 * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
2626 * deallocated.
2627 *
2628 * Make sure to deallocate the bandwidth_mutex only when the last HCD is
2629 * freed. When hcd_release() is called for either hcd in a peer set,
2630 * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
2631 */
2632static void hcd_release(struct kref *kref)
2633{
2634 struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
2635
2636 mutex_lock(&usb_port_peer_mutex);
2637 if (hcd->shared_hcd) {
2638 struct usb_hcd *peer = hcd->shared_hcd;
2639
2640 peer->shared_hcd = NULL;
2641 peer->primary_hcd = NULL;
2642 } else {
2643 kfree(hcd->address0_mutex);
2644 kfree(hcd->bandwidth_mutex);
2645 }
2646 mutex_unlock(&usb_port_peer_mutex);
2647 kfree(hcd);
2648}
2649
2650struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
2651{
2652 if (hcd)
2653 kref_get (&hcd->kref);
2654 return hcd;
2655}
2656EXPORT_SYMBOL_GPL(usb_get_hcd);
2657
2658void usb_put_hcd (struct usb_hcd *hcd)
2659{
2660 if (hcd)
2661 kref_put (&hcd->kref, hcd_release);
2662}
2663EXPORT_SYMBOL_GPL(usb_put_hcd);
2664
2665int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
2666{
2667 if (!hcd->primary_hcd)
2668 return 1;
2669 return hcd == hcd->primary_hcd;
2670}
2671EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
2672
2673int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
2674{
2675 if (!hcd->driver->find_raw_port_number)
2676 return port1;
2677
2678 return hcd->driver->find_raw_port_number(hcd, port1);
2679}
2680
2681static int usb_hcd_request_irqs(struct usb_hcd *hcd,
2682 unsigned int irqnum, unsigned long irqflags)
2683{
2684 int retval;
2685
2686 if (hcd->driver->irq) {
2687
2688 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
2689 hcd->driver->description, hcd->self.busnum);
2690 retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
2691 hcd->irq_descr, hcd);
2692 if (retval != 0) {
2693 dev_err(hcd->self.controller,
2694 "request interrupt %d failed\n",
2695 irqnum);
2696 return retval;
2697 }
2698 hcd->irq = irqnum;
2699 dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
2700 (hcd->driver->flags & HCD_MEMORY) ?
2701 "io mem" : "io base",
2702 (unsigned long long)hcd->rsrc_start);
2703 } else {
2704 hcd->irq = 0;
2705 if (hcd->rsrc_start)
2706 dev_info(hcd->self.controller, "%s 0x%08llx\n",
2707 (hcd->driver->flags & HCD_MEMORY) ?
2708 "io mem" : "io base",
2709 (unsigned long long)hcd->rsrc_start);
2710 }
2711 return 0;
2712}
2713
2714/*
2715 * Before we free this root hub, flush in-flight peering attempts
2716 * and disable peer lookups
2717 */
2718static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
2719{
2720 struct usb_device *rhdev;
2721
2722 mutex_lock(&usb_port_peer_mutex);
2723 rhdev = hcd->self.root_hub;
2724 hcd->self.root_hub = NULL;
2725 mutex_unlock(&usb_port_peer_mutex);
2726 usb_put_dev(rhdev);
2727}
2728
2729/**
2730 * usb_add_hcd - finish generic HCD structure initialization and register
2731 * @hcd: the usb_hcd structure to initialize
2732 * @irqnum: Interrupt line to allocate
2733 * @irqflags: Interrupt type flags
2734 *
2735 * Finish the remaining parts of generic HCD initialization: allocate the
2736 * buffers of consistent memory, register the bus, request the IRQ line,
2737 * and call the driver's reset() and start() routines.
2738 */
2739int usb_add_hcd(struct usb_hcd *hcd,
2740 unsigned int irqnum, unsigned long irqflags)
2741{
2742 int retval;
2743 struct usb_device *rhdev;
2744
2745 if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->skip_phy_initialization) {
2746 struct usb_phy *phy = usb_get_phy_dev(hcd->self.sysdev, 0);
2747
2748 if (IS_ERR(phy)) {
2749 retval = PTR_ERR(phy);
2750 if (retval == -EPROBE_DEFER)
2751 return retval;
2752 } else {
2753 retval = usb_phy_init(phy);
2754 if (retval) {
2755 usb_put_phy(phy);
2756 return retval;
2757 }
2758 hcd->usb_phy = phy;
2759 hcd->remove_phy = 1;
2760 }
2761 }
2762
2763 if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
2764 hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
2765 if (IS_ERR(hcd->phy_roothub)) {
2766 retval = PTR_ERR(hcd->phy_roothub);
2767 goto err_phy_roothub_alloc;
2768 }
2769
2770 retval = usb_phy_roothub_init(hcd->phy_roothub);
2771 if (retval)
2772 goto err_phy_roothub_alloc;
2773
2774 retval = usb_phy_roothub_power_on(hcd->phy_roothub);
2775 if (retval)
2776 goto err_usb_phy_roothub_power_on;
2777 }
2778
2779 dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
2780
2781 /* Keep old behaviour if authorized_default is not in [0, 1]. */
2782 if (authorized_default < 0 || authorized_default > 1) {
2783 if (hcd->wireless)
2784 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2785 else
2786 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2787 } else {
2788 if (authorized_default)
2789 set_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2790 else
2791 clear_bit(HCD_FLAG_DEV_AUTHORIZED, &hcd->flags);
2792 }
2793 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2794
2795 /* per default all interfaces are authorized */
2796 set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
2797
2798 /* HC is in reset state, but accessible. Now do the one-time init,
2799 * bottom up so that hcds can customize the root hubs before hub_wq
2800 * starts talking to them. (Note, bus id is assigned early too.)
2801 */
2802 retval = hcd_buffer_create(hcd);
2803 if (retval != 0) {
2804 dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
2805 goto err_create_buf;
2806 }
2807
2808 retval = usb_register_bus(&hcd->self);
2809 if (retval < 0)
2810 goto err_register_bus;
2811
2812 rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
2813 if (rhdev == NULL) {
2814 dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
2815 retval = -ENOMEM;
2816 goto err_allocate_root_hub;
2817 }
2818 mutex_lock(&usb_port_peer_mutex);
2819 hcd->self.root_hub = rhdev;
2820 mutex_unlock(&usb_port_peer_mutex);
2821
2822 switch (hcd->speed) {
2823 case HCD_USB11:
2824 rhdev->speed = USB_SPEED_FULL;
2825 break;
2826 case HCD_USB2:
2827 rhdev->speed = USB_SPEED_HIGH;
2828 break;
2829 case HCD_USB25:
2830 rhdev->speed = USB_SPEED_WIRELESS;
2831 break;
2832 case HCD_USB3:
2833 rhdev->speed = USB_SPEED_SUPER;
2834 break;
2835 case HCD_USB31:
2836 rhdev->speed = USB_SPEED_SUPER_PLUS;
2837 break;
2838 default:
2839 retval = -EINVAL;
2840 goto err_set_rh_speed;
2841 }
2842
2843 /* wakeup flag init defaults to "everything works" for root hubs,
2844 * but drivers can override it in reset() if needed, along with
2845 * recording the overall controller's system wakeup capability.
2846 */
2847 device_set_wakeup_capable(&rhdev->dev, 1);
2848
2849 /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
2850 * registered. But since the controller can die at any time,
2851 * let's initialize the flag before touching the hardware.
2852 */
2853 set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2854
2855 /* "reset" is misnamed; its role is now one-time init. the controller
2856 * should already have been reset (and boot firmware kicked off etc).
2857 */
2858 if (hcd->driver->reset) {
2859 retval = hcd->driver->reset(hcd);
2860 if (retval < 0) {
2861 dev_err(hcd->self.controller, "can't setup: %d\n",
2862 retval);
2863 goto err_hcd_driver_setup;
2864 }
2865 }
2866 hcd->rh_pollable = 1;
2867
2868 /* NOTE: root hub and controller capabilities may not be the same */
2869 if (device_can_wakeup(hcd->self.controller)
2870 && device_can_wakeup(&hcd->self.root_hub->dev))
2871 dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
2872
2873 /* initialize tasklets */
2874 init_giveback_urb_bh(&hcd->high_prio_bh);
2875 init_giveback_urb_bh(&hcd->low_prio_bh);
2876
2877 /* enable irqs just before we start the controller,
2878 * if the BIOS provides legacy PCI irqs.
2879 */
2880 if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
2881 retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
2882 if (retval)
2883 goto err_request_irq;
2884 }
2885
2886 hcd->state = HC_STATE_RUNNING;
2887 retval = hcd->driver->start(hcd);
2888 if (retval < 0) {
2889 dev_err(hcd->self.controller, "startup error %d\n", retval);
2890 goto err_hcd_driver_start;
2891 }
2892
2893 /* starting here, usbcore will pay attention to this root hub */
2894 retval = register_root_hub(hcd);
2895 if (retval != 0)
2896 goto err_register_root_hub;
2897
2898 retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2899 if (retval < 0) {
2900 printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
2901 retval);
2902 goto error_create_attr_group;
2903 }
2904 if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
2905 usb_hcd_poll_rh_status(hcd);
2906
2907 return retval;
2908
2909error_create_attr_group:
2910 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2911 if (HC_IS_RUNNING(hcd->state))
2912 hcd->state = HC_STATE_QUIESCING;
2913 spin_lock_irq(&hcd_root_hub_lock);
2914 hcd->rh_registered = 0;
2915 spin_unlock_irq(&hcd_root_hub_lock);
2916
2917#ifdef CONFIG_PM
2918 cancel_work_sync(&hcd->wakeup_work);
2919#endif
2920 mutex_lock(&usb_bus_idr_lock);
2921 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2922 mutex_unlock(&usb_bus_idr_lock);
2923err_register_root_hub:
2924 hcd->rh_pollable = 0;
2925 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2926 del_timer_sync(&hcd->rh_timer);
2927 hcd->driver->stop(hcd);
2928 hcd->state = HC_STATE_HALT;
2929 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2930 del_timer_sync(&hcd->rh_timer);
2931err_hcd_driver_start:
2932 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
2933 free_irq(irqnum, hcd);
2934err_request_irq:
2935err_hcd_driver_setup:
2936err_set_rh_speed:
2937 usb_put_invalidate_rhdev(hcd);
2938err_allocate_root_hub:
2939 usb_deregister_bus(&hcd->self);
2940err_register_bus:
2941 hcd_buffer_destroy(hcd);
2942err_create_buf:
2943 usb_phy_roothub_power_off(hcd->phy_roothub);
2944err_usb_phy_roothub_power_on:
2945 usb_phy_roothub_exit(hcd->phy_roothub);
2946err_phy_roothub_alloc:
2947 if (hcd->remove_phy && hcd->usb_phy) {
2948 usb_phy_shutdown(hcd->usb_phy);
2949 usb_put_phy(hcd->usb_phy);
2950 hcd->usb_phy = NULL;
2951 }
2952 return retval;
2953}
2954EXPORT_SYMBOL_GPL(usb_add_hcd);
2955
2956/**
2957 * usb_remove_hcd - shutdown processing for generic HCDs
2958 * @hcd: the usb_hcd structure to remove
2959 * Context: !in_interrupt()
2960 *
2961 * Disconnects the root hub, then reverses the effects of usb_add_hcd(),
2962 * invoking the HCD's stop() method.
2963 */
2964void usb_remove_hcd(struct usb_hcd *hcd)
2965{
2966 struct usb_device *rhdev = hcd->self.root_hub;
2967
2968 dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
2969
2970 usb_get_dev(rhdev);
2971 sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
2972
2973 clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
2974 if (HC_IS_RUNNING (hcd->state))
2975 hcd->state = HC_STATE_QUIESCING;
2976
2977 dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
2978 spin_lock_irq (&hcd_root_hub_lock);
2979 hcd->rh_registered = 0;
2980 spin_unlock_irq (&hcd_root_hub_lock);
2981
2982#ifdef CONFIG_PM
2983 cancel_work_sync(&hcd->wakeup_work);
2984#endif
2985
2986 mutex_lock(&usb_bus_idr_lock);
2987 usb_disconnect(&rhdev); /* Sets rhdev to NULL */
2988 mutex_unlock(&usb_bus_idr_lock);
2989
2990 /*
2991 * tasklet_kill() isn't needed here because:
2992 * - driver's disconnect() called from usb_disconnect() should
2993 * make sure its URBs are completed during the disconnect()
2994 * callback
2995 *
2996 * - it is too late to run complete() here since driver may have
2997 * been removed already now
2998 */
2999
3000 /* Prevent any more root-hub status calls from the timer.
3001 * The HCD might still restart the timer (if a port status change
3002 * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
3003 * the hub_status_data() callback.
3004 */
3005 hcd->rh_pollable = 0;
3006 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
3007 del_timer_sync(&hcd->rh_timer);
3008
3009 hcd->driver->stop(hcd);
3010 hcd->state = HC_STATE_HALT;
3011
3012 /* In case the HCD restarted the timer, stop it again. */
3013 clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
3014 del_timer_sync(&hcd->rh_timer);
3015
3016 if (usb_hcd_is_primary_hcd(hcd)) {
3017 if (hcd->irq > 0)
3018 free_irq(hcd->irq, hcd);
3019 }
3020
3021 usb_deregister_bus(&hcd->self);
3022 hcd_buffer_destroy(hcd);
3023
3024 usb_phy_roothub_power_off(hcd->phy_roothub);
3025 usb_phy_roothub_exit(hcd->phy_roothub);
3026
3027 if (hcd->remove_phy && hcd->usb_phy) {
3028 usb_phy_shutdown(hcd->usb_phy);
3029 usb_put_phy(hcd->usb_phy);
3030 hcd->usb_phy = NULL;
3031 }
3032
3033 usb_put_invalidate_rhdev(hcd);
3034 hcd->flags = 0;
3035}
3036EXPORT_SYMBOL_GPL(usb_remove_hcd);
3037
3038void
3039usb_hcd_platform_shutdown(struct platform_device *dev)
3040{
3041 struct usb_hcd *hcd = platform_get_drvdata(dev);
3042
3043 if (hcd->driver->shutdown)
3044 hcd->driver->shutdown(hcd);
3045}
3046EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
3047
3048/*-------------------------------------------------------------------------*/
3049
3050#if IS_ENABLED(CONFIG_USB_MON)
3051
3052const struct usb_mon_operations *mon_ops;
3053
3054/*
3055 * The registration is unlocked.
3056 * We do it this way because we do not want to lock in hot paths.
3057 *
3058 * Notice that the code is minimally error-proof. Because usbmon needs
3059 * symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
3060 */
3061
3062int usb_mon_register(const struct usb_mon_operations *ops)
3063{
3064
3065 if (mon_ops)
3066 return -EBUSY;
3067
3068 mon_ops = ops;
3069 mb();
3070 return 0;
3071}
3072EXPORT_SYMBOL_GPL (usb_mon_register);
3073
3074void usb_mon_deregister (void)
3075{
3076
3077 if (mon_ops == NULL) {
3078 printk(KERN_ERR "USB: monitor was not registered\n");
3079 return;
3080 }
3081 mon_ops = NULL;
3082 mb();
3083}
3084EXPORT_SYMBOL_GPL (usb_mon_deregister);
3085
3086#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */