Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * ati_remote2 - ATI/Philips USB RF remote driver
4 *
5 * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
6 * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
7 */
8
9#include <linux/usb/input.h>
10#include <linux/slab.h>
11#include <linux/module.h>
12
13#define DRIVER_DESC "ATI/Philips USB RF remote driver"
14
15MODULE_DESCRIPTION(DRIVER_DESC);
16MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
17MODULE_LICENSE("GPL");
18
19/*
20 * ATI Remote Wonder II Channel Configuration
21 *
22 * The remote control can be assigned one of sixteen "channels" in order to facilitate
23 * the use of multiple remote controls within range of each other.
24 * A remote's "channel" may be altered by pressing and holding the "PC" button for
25 * approximately 3 seconds, after which the button will slowly flash the count of the
26 * currently configured "channel", using the numeric keypad enter a number between 1 and
27 * 16 and then press the "PC" button again, the button will slowly flash the count of the
28 * newly configured "channel".
29 */
30
31enum {
32 ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
33 ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
34};
35
36static int ati_remote2_set_mask(const char *val,
37 const struct kernel_param *kp,
38 unsigned int max)
39{
40 unsigned int mask;
41 int ret;
42
43 if (!val)
44 return -EINVAL;
45
46 ret = kstrtouint(val, 0, &mask);
47 if (ret)
48 return ret;
49
50 if (mask & ~max)
51 return -EINVAL;
52
53 *(unsigned int *)kp->arg = mask;
54
55 return 0;
56}
57
58static int ati_remote2_set_channel_mask(const char *val,
59 const struct kernel_param *kp)
60{
61 pr_debug("%s()\n", __func__);
62
63 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
64}
65
66static int ati_remote2_get_channel_mask(char *buffer,
67 const struct kernel_param *kp)
68{
69 pr_debug("%s()\n", __func__);
70
71 return sprintf(buffer, "0x%04x\n", *(unsigned int *)kp->arg);
72}
73
74static int ati_remote2_set_mode_mask(const char *val,
75 const struct kernel_param *kp)
76{
77 pr_debug("%s()\n", __func__);
78
79 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
80}
81
82static int ati_remote2_get_mode_mask(char *buffer,
83 const struct kernel_param *kp)
84{
85 pr_debug("%s()\n", __func__);
86
87 return sprintf(buffer, "0x%02x\n", *(unsigned int *)kp->arg);
88}
89
90static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
91#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
92static const struct kernel_param_ops param_ops_channel_mask = {
93 .set = ati_remote2_set_channel_mask,
94 .get = ati_remote2_get_channel_mask,
95};
96module_param(channel_mask, channel_mask, 0644);
97MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
98
99static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
100#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
101static const struct kernel_param_ops param_ops_mode_mask = {
102 .set = ati_remote2_set_mode_mask,
103 .get = ati_remote2_get_mode_mask,
104};
105module_param(mode_mask, mode_mask, 0644);
106MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
107
108static const struct usb_device_id ati_remote2_id_table[] = {
109 { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
110 { }
111};
112MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
113
114static DEFINE_MUTEX(ati_remote2_mutex);
115
116enum {
117 ATI_REMOTE2_OPENED = 0x1,
118 ATI_REMOTE2_SUSPENDED = 0x2,
119};
120
121enum {
122 ATI_REMOTE2_AUX1,
123 ATI_REMOTE2_AUX2,
124 ATI_REMOTE2_AUX3,
125 ATI_REMOTE2_AUX4,
126 ATI_REMOTE2_PC,
127 ATI_REMOTE2_MODES,
128};
129
130static const struct {
131 u8 hw_code;
132 u16 keycode;
133} ati_remote2_key_table[] = {
134 { 0x00, KEY_0 },
135 { 0x01, KEY_1 },
136 { 0x02, KEY_2 },
137 { 0x03, KEY_3 },
138 { 0x04, KEY_4 },
139 { 0x05, KEY_5 },
140 { 0x06, KEY_6 },
141 { 0x07, KEY_7 },
142 { 0x08, KEY_8 },
143 { 0x09, KEY_9 },
144 { 0x0c, KEY_POWER },
145 { 0x0d, KEY_MUTE },
146 { 0x10, KEY_VOLUMEUP },
147 { 0x11, KEY_VOLUMEDOWN },
148 { 0x20, KEY_CHANNELUP },
149 { 0x21, KEY_CHANNELDOWN },
150 { 0x28, KEY_FORWARD },
151 { 0x29, KEY_REWIND },
152 { 0x2c, KEY_PLAY },
153 { 0x30, KEY_PAUSE },
154 { 0x31, KEY_STOP },
155 { 0x37, KEY_RECORD },
156 { 0x38, KEY_DVD },
157 { 0x39, KEY_TV },
158 { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
159 { 0x54, KEY_MENU },
160 { 0x58, KEY_UP },
161 { 0x59, KEY_DOWN },
162 { 0x5a, KEY_LEFT },
163 { 0x5b, KEY_RIGHT },
164 { 0x5c, KEY_OK },
165 { 0x78, KEY_A },
166 { 0x79, KEY_B },
167 { 0x7a, KEY_C },
168 { 0x7b, KEY_D },
169 { 0x7c, KEY_E },
170 { 0x7d, KEY_F },
171 { 0x82, KEY_ENTER },
172 { 0x8e, KEY_VENDOR },
173 { 0x96, KEY_COFFEE },
174 { 0xa9, BTN_LEFT },
175 { 0xaa, BTN_RIGHT },
176 { 0xbe, KEY_QUESTION },
177 { 0xd0, KEY_EDIT },
178 { 0xd5, KEY_FRONT },
179 { 0xf9, KEY_INFO },
180};
181
182struct ati_remote2 {
183 struct input_dev *idev;
184 struct usb_device *udev;
185
186 struct usb_interface *intf[2];
187 struct usb_endpoint_descriptor *ep[2];
188 struct urb *urb[2];
189 void *buf[2];
190 dma_addr_t buf_dma[2];
191
192 unsigned long jiffies;
193 int mode;
194
195 char name[64];
196 char phys[64];
197
198 /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
199 u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
200
201 unsigned int flags;
202
203 unsigned int channel_mask;
204 unsigned int mode_mask;
205};
206
207static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
208static void ati_remote2_disconnect(struct usb_interface *interface);
209static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
210static int ati_remote2_resume(struct usb_interface *interface);
211static int ati_remote2_reset_resume(struct usb_interface *interface);
212static int ati_remote2_pre_reset(struct usb_interface *interface);
213static int ati_remote2_post_reset(struct usb_interface *interface);
214
215static struct usb_driver ati_remote2_driver = {
216 .name = "ati_remote2",
217 .probe = ati_remote2_probe,
218 .disconnect = ati_remote2_disconnect,
219 .id_table = ati_remote2_id_table,
220 .suspend = ati_remote2_suspend,
221 .resume = ati_remote2_resume,
222 .reset_resume = ati_remote2_reset_resume,
223 .pre_reset = ati_remote2_pre_reset,
224 .post_reset = ati_remote2_post_reset,
225 .supports_autosuspend = 1,
226};
227
228static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
229{
230 int r;
231
232 r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
233 if (r) {
234 dev_err(&ar2->intf[0]->dev,
235 "%s(): usb_submit_urb() = %d\n", __func__, r);
236 return r;
237 }
238 r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
239 if (r) {
240 usb_kill_urb(ar2->urb[0]);
241 dev_err(&ar2->intf[1]->dev,
242 "%s(): usb_submit_urb() = %d\n", __func__, r);
243 return r;
244 }
245
246 return 0;
247}
248
249static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
250{
251 usb_kill_urb(ar2->urb[1]);
252 usb_kill_urb(ar2->urb[0]);
253}
254
255static int ati_remote2_open(struct input_dev *idev)
256{
257 struct ati_remote2 *ar2 = input_get_drvdata(idev);
258 int r;
259
260 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
261
262 r = usb_autopm_get_interface(ar2->intf[0]);
263 if (r) {
264 dev_err(&ar2->intf[0]->dev,
265 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
266 goto fail1;
267 }
268
269 mutex_lock(&ati_remote2_mutex);
270
271 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
272 r = ati_remote2_submit_urbs(ar2);
273 if (r)
274 goto fail2;
275 }
276
277 ar2->flags |= ATI_REMOTE2_OPENED;
278
279 mutex_unlock(&ati_remote2_mutex);
280
281 usb_autopm_put_interface(ar2->intf[0]);
282
283 return 0;
284
285 fail2:
286 mutex_unlock(&ati_remote2_mutex);
287 usb_autopm_put_interface(ar2->intf[0]);
288 fail1:
289 return r;
290}
291
292static void ati_remote2_close(struct input_dev *idev)
293{
294 struct ati_remote2 *ar2 = input_get_drvdata(idev);
295
296 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
297
298 mutex_lock(&ati_remote2_mutex);
299
300 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
301 ati_remote2_kill_urbs(ar2);
302
303 ar2->flags &= ~ATI_REMOTE2_OPENED;
304
305 mutex_unlock(&ati_remote2_mutex);
306}
307
308static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
309{
310 struct input_dev *idev = ar2->idev;
311 u8 *data = ar2->buf[0];
312 int channel, mode;
313
314 channel = data[0] >> 4;
315
316 if (!((1 << channel) & ar2->channel_mask))
317 return;
318
319 mode = data[0] & 0x0F;
320
321 if (mode > ATI_REMOTE2_PC) {
322 dev_err(&ar2->intf[0]->dev,
323 "Unknown mode byte (%02x %02x %02x %02x)\n",
324 data[3], data[2], data[1], data[0]);
325 return;
326 }
327
328 if (!((1 << mode) & ar2->mode_mask))
329 return;
330
331 input_event(idev, EV_REL, REL_X, (s8) data[1]);
332 input_event(idev, EV_REL, REL_Y, (s8) data[2]);
333 input_sync(idev);
334}
335
336static int ati_remote2_lookup(unsigned int hw_code)
337{
338 int i;
339
340 for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
341 if (ati_remote2_key_table[i].hw_code == hw_code)
342 return i;
343
344 return -1;
345}
346
347static void ati_remote2_input_key(struct ati_remote2 *ar2)
348{
349 struct input_dev *idev = ar2->idev;
350 u8 *data = ar2->buf[1];
351 int channel, mode, hw_code, index;
352
353 channel = data[0] >> 4;
354
355 if (!((1 << channel) & ar2->channel_mask))
356 return;
357
358 mode = data[0] & 0x0F;
359
360 if (mode > ATI_REMOTE2_PC) {
361 dev_err(&ar2->intf[1]->dev,
362 "Unknown mode byte (%02x %02x %02x %02x)\n",
363 data[3], data[2], data[1], data[0]);
364 return;
365 }
366
367 hw_code = data[2];
368 if (hw_code == 0x3f) {
369 /*
370 * For some incomprehensible reason the mouse pad generates
371 * events which look identical to the events from the last
372 * pressed mode key. Naturally we don't want to generate key
373 * events for the mouse pad so we filter out any subsequent
374 * events from the same mode key.
375 */
376 if (ar2->mode == mode)
377 return;
378
379 if (data[1] == 0)
380 ar2->mode = mode;
381 }
382
383 if (!((1 << mode) & ar2->mode_mask))
384 return;
385
386 index = ati_remote2_lookup(hw_code);
387 if (index < 0) {
388 dev_err(&ar2->intf[1]->dev,
389 "Unknown code byte (%02x %02x %02x %02x)\n",
390 data[3], data[2], data[1], data[0]);
391 return;
392 }
393
394 switch (data[1]) {
395 case 0: /* release */
396 break;
397 case 1: /* press */
398 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
399 break;
400 case 2: /* repeat */
401
402 /* No repeat for mouse buttons. */
403 if (ar2->keycode[mode][index] == BTN_LEFT ||
404 ar2->keycode[mode][index] == BTN_RIGHT)
405 return;
406
407 if (!time_after_eq(jiffies, ar2->jiffies))
408 return;
409
410 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
411 break;
412 default:
413 dev_err(&ar2->intf[1]->dev,
414 "Unknown state byte (%02x %02x %02x %02x)\n",
415 data[3], data[2], data[1], data[0]);
416 return;
417 }
418
419 input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
420 input_sync(idev);
421}
422
423static void ati_remote2_complete_mouse(struct urb *urb)
424{
425 struct ati_remote2 *ar2 = urb->context;
426 int r;
427
428 switch (urb->status) {
429 case 0:
430 usb_mark_last_busy(ar2->udev);
431 ati_remote2_input_mouse(ar2);
432 break;
433 case -ENOENT:
434 case -EILSEQ:
435 case -ECONNRESET:
436 case -ESHUTDOWN:
437 dev_dbg(&ar2->intf[0]->dev,
438 "%s(): urb status = %d\n", __func__, urb->status);
439 return;
440 default:
441 usb_mark_last_busy(ar2->udev);
442 dev_err(&ar2->intf[0]->dev,
443 "%s(): urb status = %d\n", __func__, urb->status);
444 }
445
446 r = usb_submit_urb(urb, GFP_ATOMIC);
447 if (r)
448 dev_err(&ar2->intf[0]->dev,
449 "%s(): usb_submit_urb() = %d\n", __func__, r);
450}
451
452static void ati_remote2_complete_key(struct urb *urb)
453{
454 struct ati_remote2 *ar2 = urb->context;
455 int r;
456
457 switch (urb->status) {
458 case 0:
459 usb_mark_last_busy(ar2->udev);
460 ati_remote2_input_key(ar2);
461 break;
462 case -ENOENT:
463 case -EILSEQ:
464 case -ECONNRESET:
465 case -ESHUTDOWN:
466 dev_dbg(&ar2->intf[1]->dev,
467 "%s(): urb status = %d\n", __func__, urb->status);
468 return;
469 default:
470 usb_mark_last_busy(ar2->udev);
471 dev_err(&ar2->intf[1]->dev,
472 "%s(): urb status = %d\n", __func__, urb->status);
473 }
474
475 r = usb_submit_urb(urb, GFP_ATOMIC);
476 if (r)
477 dev_err(&ar2->intf[1]->dev,
478 "%s(): usb_submit_urb() = %d\n", __func__, r);
479}
480
481static int ati_remote2_getkeycode(struct input_dev *idev,
482 struct input_keymap_entry *ke)
483{
484 struct ati_remote2 *ar2 = input_get_drvdata(idev);
485 unsigned int mode;
486 int offset;
487 unsigned int index;
488 unsigned int scancode;
489
490 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
491 index = ke->index;
492 if (index >= ATI_REMOTE2_MODES *
493 ARRAY_SIZE(ati_remote2_key_table))
494 return -EINVAL;
495
496 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
497 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
498 scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code;
499 } else {
500 if (input_scancode_to_scalar(ke, &scancode))
501 return -EINVAL;
502
503 mode = scancode >> 8;
504 if (mode > ATI_REMOTE2_PC)
505 return -EINVAL;
506
507 offset = ati_remote2_lookup(scancode & 0xff);
508 if (offset < 0)
509 return -EINVAL;
510
511 index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset;
512 }
513
514 ke->keycode = ar2->keycode[mode][offset];
515 ke->len = sizeof(scancode);
516 memcpy(&ke->scancode, &scancode, sizeof(scancode));
517 ke->index = index;
518
519 return 0;
520}
521
522static int ati_remote2_setkeycode(struct input_dev *idev,
523 const struct input_keymap_entry *ke,
524 unsigned int *old_keycode)
525{
526 struct ati_remote2 *ar2 = input_get_drvdata(idev);
527 unsigned int mode;
528 int offset;
529 unsigned int index;
530 unsigned int scancode;
531
532 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
533 if (ke->index >= ATI_REMOTE2_MODES *
534 ARRAY_SIZE(ati_remote2_key_table))
535 return -EINVAL;
536
537 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
538 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
539 } else {
540 if (input_scancode_to_scalar(ke, &scancode))
541 return -EINVAL;
542
543 mode = scancode >> 8;
544 if (mode > ATI_REMOTE2_PC)
545 return -EINVAL;
546
547 offset = ati_remote2_lookup(scancode & 0xff);
548 if (offset < 0)
549 return -EINVAL;
550 }
551
552 *old_keycode = ar2->keycode[mode][offset];
553 ar2->keycode[mode][offset] = ke->keycode;
554 __set_bit(ke->keycode, idev->keybit);
555
556 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
557 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
558 if (ar2->keycode[mode][index] == *old_keycode)
559 return 0;
560 }
561 }
562
563 __clear_bit(*old_keycode, idev->keybit);
564
565 return 0;
566}
567
568static int ati_remote2_input_init(struct ati_remote2 *ar2)
569{
570 struct input_dev *idev;
571 int index, mode, retval;
572
573 idev = input_allocate_device();
574 if (!idev)
575 return -ENOMEM;
576
577 ar2->idev = idev;
578 input_set_drvdata(idev, ar2);
579
580 idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
581 idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
582 BIT_MASK(BTN_RIGHT);
583 idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
584
585 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
586 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
587 ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
588 __set_bit(ar2->keycode[mode][index], idev->keybit);
589 }
590 }
591
592 /* AUX1-AUX4 and PC generate the same scancode. */
593 index = ati_remote2_lookup(0x3f);
594 ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
595 ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
596 ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
597 ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
598 ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
599 __set_bit(KEY_PROG1, idev->keybit);
600 __set_bit(KEY_PROG2, idev->keybit);
601 __set_bit(KEY_PROG3, idev->keybit);
602 __set_bit(KEY_PROG4, idev->keybit);
603 __set_bit(KEY_PC, idev->keybit);
604
605 idev->rep[REP_DELAY] = 250;
606 idev->rep[REP_PERIOD] = 33;
607
608 idev->open = ati_remote2_open;
609 idev->close = ati_remote2_close;
610
611 idev->getkeycode = ati_remote2_getkeycode;
612 idev->setkeycode = ati_remote2_setkeycode;
613
614 idev->name = ar2->name;
615 idev->phys = ar2->phys;
616
617 usb_to_input_id(ar2->udev, &idev->id);
618 idev->dev.parent = &ar2->udev->dev;
619
620 retval = input_register_device(idev);
621 if (retval)
622 input_free_device(idev);
623
624 return retval;
625}
626
627static int ati_remote2_urb_init(struct ati_remote2 *ar2)
628{
629 struct usb_device *udev = ar2->udev;
630 int i, pipe, maxp;
631
632 for (i = 0; i < 2; i++) {
633 ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
634 if (!ar2->buf[i])
635 return -ENOMEM;
636
637 ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
638 if (!ar2->urb[i])
639 return -ENOMEM;
640
641 pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
642 maxp = usb_maxpacket(udev, pipe);
643 maxp = maxp > 4 ? 4 : maxp;
644
645 usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
646 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
647 ar2, ar2->ep[i]->bInterval);
648 ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
649 ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
650 }
651
652 return 0;
653}
654
655static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
656{
657 int i;
658
659 for (i = 0; i < 2; i++) {
660 usb_free_urb(ar2->urb[i]);
661 usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
662 }
663}
664
665static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
666{
667 int r, i, channel;
668
669 /*
670 * Configure receiver to only accept input from remote "channel"
671 * channel == 0 -> Accept input from any remote channel
672 * channel == 1 -> Only accept input from remote channel 1
673 * channel == 2 -> Only accept input from remote channel 2
674 * ...
675 * channel == 16 -> Only accept input from remote channel 16
676 */
677
678 channel = 0;
679 for (i = 0; i < 16; i++) {
680 if ((1 << i) & ch_mask) {
681 if (!(~(1 << i) & ch_mask))
682 channel = i + 1;
683 break;
684 }
685 }
686
687 r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
688 0x20,
689 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
690 channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
691 if (r) {
692 dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
693 __func__, r);
694 return r;
695 }
696
697 return 0;
698}
699
700static ssize_t ati_remote2_show_channel_mask(struct device *dev,
701 struct device_attribute *attr,
702 char *buf)
703{
704 struct usb_device *udev = to_usb_device(dev);
705 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
706 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
707
708 return sprintf(buf, "0x%04x\n", ar2->channel_mask);
709}
710
711static ssize_t ati_remote2_store_channel_mask(struct device *dev,
712 struct device_attribute *attr,
713 const char *buf, size_t count)
714{
715 struct usb_device *udev = to_usb_device(dev);
716 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
717 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
718 unsigned int mask;
719 int r;
720
721 r = kstrtouint(buf, 0, &mask);
722 if (r)
723 return r;
724
725 if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
726 return -EINVAL;
727
728 r = usb_autopm_get_interface(ar2->intf[0]);
729 if (r) {
730 dev_err(&ar2->intf[0]->dev,
731 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
732 return r;
733 }
734
735 mutex_lock(&ati_remote2_mutex);
736
737 if (mask != ar2->channel_mask) {
738 r = ati_remote2_setup(ar2, mask);
739 if (!r)
740 ar2->channel_mask = mask;
741 }
742
743 mutex_unlock(&ati_remote2_mutex);
744
745 usb_autopm_put_interface(ar2->intf[0]);
746
747 return r ? r : count;
748}
749
750static ssize_t ati_remote2_show_mode_mask(struct device *dev,
751 struct device_attribute *attr,
752 char *buf)
753{
754 struct usb_device *udev = to_usb_device(dev);
755 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
756 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
757
758 return sprintf(buf, "0x%02x\n", ar2->mode_mask);
759}
760
761static ssize_t ati_remote2_store_mode_mask(struct device *dev,
762 struct device_attribute *attr,
763 const char *buf, size_t count)
764{
765 struct usb_device *udev = to_usb_device(dev);
766 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
767 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
768 unsigned int mask;
769 int err;
770
771 err = kstrtouint(buf, 0, &mask);
772 if (err)
773 return err;
774
775 if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
776 return -EINVAL;
777
778 ar2->mode_mask = mask;
779
780 return count;
781}
782
783static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
784 ati_remote2_store_channel_mask);
785
786static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
787 ati_remote2_store_mode_mask);
788
789static struct attribute *ati_remote2_attrs[] = {
790 &dev_attr_channel_mask.attr,
791 &dev_attr_mode_mask.attr,
792 NULL,
793};
794
795static struct attribute_group ati_remote2_attr_group = {
796 .attrs = ati_remote2_attrs,
797};
798
799static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
800{
801 struct usb_device *udev = interface_to_usbdev(interface);
802 struct usb_host_interface *alt = interface->cur_altsetting;
803 struct ati_remote2 *ar2;
804 int r;
805
806 if (alt->desc.bInterfaceNumber)
807 return -ENODEV;
808
809 ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
810 if (!ar2)
811 return -ENOMEM;
812
813 ar2->udev = udev;
814
815 /* Sanity check, first interface must have an endpoint */
816 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
817 dev_err(&interface->dev,
818 "%s(): interface 0 must have an endpoint\n", __func__);
819 r = -ENODEV;
820 goto fail1;
821 }
822 ar2->intf[0] = interface;
823 ar2->ep[0] = &alt->endpoint[0].desc;
824
825 /* Sanity check, the device must have two interfaces */
826 ar2->intf[1] = usb_ifnum_to_if(udev, 1);
827 if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) {
828 dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n",
829 __func__, udev->actconfig->desc.bNumInterfaces);
830 r = -ENODEV;
831 goto fail1;
832 }
833
834 r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
835 if (r)
836 goto fail1;
837
838 /* Sanity check, second interface must have an endpoint */
839 alt = ar2->intf[1]->cur_altsetting;
840 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
841 dev_err(&interface->dev,
842 "%s(): interface 1 must have an endpoint\n", __func__);
843 r = -ENODEV;
844 goto fail2;
845 }
846 ar2->ep[1] = &alt->endpoint[0].desc;
847
848 r = ati_remote2_urb_init(ar2);
849 if (r)
850 goto fail3;
851
852 ar2->channel_mask = channel_mask;
853 ar2->mode_mask = mode_mask;
854
855 r = ati_remote2_setup(ar2, ar2->channel_mask);
856 if (r)
857 goto fail3;
858
859 usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
860 strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
861
862 strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
863
864 r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
865 if (r)
866 goto fail3;
867
868 r = ati_remote2_input_init(ar2);
869 if (r)
870 goto fail4;
871
872 usb_set_intfdata(interface, ar2);
873
874 interface->needs_remote_wakeup = 1;
875
876 return 0;
877
878 fail4:
879 sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
880 fail3:
881 ati_remote2_urb_cleanup(ar2);
882 fail2:
883 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
884 fail1:
885 kfree(ar2);
886
887 return r;
888}
889
890static void ati_remote2_disconnect(struct usb_interface *interface)
891{
892 struct ati_remote2 *ar2;
893 struct usb_host_interface *alt = interface->cur_altsetting;
894
895 if (alt->desc.bInterfaceNumber)
896 return;
897
898 ar2 = usb_get_intfdata(interface);
899 usb_set_intfdata(interface, NULL);
900
901 input_unregister_device(ar2->idev);
902
903 sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
904
905 ati_remote2_urb_cleanup(ar2);
906
907 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
908
909 kfree(ar2);
910}
911
912static int ati_remote2_suspend(struct usb_interface *interface,
913 pm_message_t message)
914{
915 struct ati_remote2 *ar2;
916 struct usb_host_interface *alt = interface->cur_altsetting;
917
918 if (alt->desc.bInterfaceNumber)
919 return 0;
920
921 ar2 = usb_get_intfdata(interface);
922
923 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
924
925 mutex_lock(&ati_remote2_mutex);
926
927 if (ar2->flags & ATI_REMOTE2_OPENED)
928 ati_remote2_kill_urbs(ar2);
929
930 ar2->flags |= ATI_REMOTE2_SUSPENDED;
931
932 mutex_unlock(&ati_remote2_mutex);
933
934 return 0;
935}
936
937static int ati_remote2_resume(struct usb_interface *interface)
938{
939 struct ati_remote2 *ar2;
940 struct usb_host_interface *alt = interface->cur_altsetting;
941 int r = 0;
942
943 if (alt->desc.bInterfaceNumber)
944 return 0;
945
946 ar2 = usb_get_intfdata(interface);
947
948 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
949
950 mutex_lock(&ati_remote2_mutex);
951
952 if (ar2->flags & ATI_REMOTE2_OPENED)
953 r = ati_remote2_submit_urbs(ar2);
954
955 if (!r)
956 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
957
958 mutex_unlock(&ati_remote2_mutex);
959
960 return r;
961}
962
963static int ati_remote2_reset_resume(struct usb_interface *interface)
964{
965 struct ati_remote2 *ar2;
966 struct usb_host_interface *alt = interface->cur_altsetting;
967 int r = 0;
968
969 if (alt->desc.bInterfaceNumber)
970 return 0;
971
972 ar2 = usb_get_intfdata(interface);
973
974 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
975
976 mutex_lock(&ati_remote2_mutex);
977
978 r = ati_remote2_setup(ar2, ar2->channel_mask);
979 if (r)
980 goto out;
981
982 if (ar2->flags & ATI_REMOTE2_OPENED)
983 r = ati_remote2_submit_urbs(ar2);
984
985 if (!r)
986 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
987
988 out:
989 mutex_unlock(&ati_remote2_mutex);
990
991 return r;
992}
993
994static int ati_remote2_pre_reset(struct usb_interface *interface)
995{
996 struct ati_remote2 *ar2;
997 struct usb_host_interface *alt = interface->cur_altsetting;
998
999 if (alt->desc.bInterfaceNumber)
1000 return 0;
1001
1002 ar2 = usb_get_intfdata(interface);
1003
1004 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1005
1006 mutex_lock(&ati_remote2_mutex);
1007
1008 if (ar2->flags == ATI_REMOTE2_OPENED)
1009 ati_remote2_kill_urbs(ar2);
1010
1011 return 0;
1012}
1013
1014static int ati_remote2_post_reset(struct usb_interface *interface)
1015{
1016 struct ati_remote2 *ar2;
1017 struct usb_host_interface *alt = interface->cur_altsetting;
1018 int r = 0;
1019
1020 if (alt->desc.bInterfaceNumber)
1021 return 0;
1022
1023 ar2 = usb_get_intfdata(interface);
1024
1025 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1026
1027 if (ar2->flags == ATI_REMOTE2_OPENED)
1028 r = ati_remote2_submit_urbs(ar2);
1029
1030 mutex_unlock(&ati_remote2_mutex);
1031
1032 return r;
1033}
1034
1035module_usb_driver(ati_remote2_driver);
1/*
2 * ati_remote2 - ATI/Philips USB RF remote driver
3 *
4 * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
5 * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2
9 * as published by the Free Software Foundation.
10 */
11
12#include <linux/usb/input.h>
13#include <linux/slab.h>
14#include <linux/module.h>
15
16#define DRIVER_DESC "ATI/Philips USB RF remote driver"
17
18MODULE_DESCRIPTION(DRIVER_DESC);
19MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
20MODULE_LICENSE("GPL");
21
22/*
23 * ATI Remote Wonder II Channel Configuration
24 *
25 * The remote control can by assigned one of sixteen "channels" in order to facilitate
26 * the use of multiple remote controls within range of each other.
27 * A remote's "channel" may be altered by pressing and holding the "PC" button for
28 * approximately 3 seconds, after which the button will slowly flash the count of the
29 * currently configured "channel", using the numeric keypad enter a number between 1 and
30 * 16 and then press the "PC" button again, the button will slowly flash the count of the
31 * newly configured "channel".
32 */
33
34enum {
35 ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
36 ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
37};
38
39static int ati_remote2_set_mask(const char *val,
40 const struct kernel_param *kp,
41 unsigned int max)
42{
43 unsigned int mask;
44 int ret;
45
46 if (!val)
47 return -EINVAL;
48
49 ret = kstrtouint(val, 0, &mask);
50 if (ret)
51 return ret;
52
53 if (mask & ~max)
54 return -EINVAL;
55
56 *(unsigned int *)kp->arg = mask;
57
58 return 0;
59}
60
61static int ati_remote2_set_channel_mask(const char *val,
62 const struct kernel_param *kp)
63{
64 pr_debug("%s()\n", __func__);
65
66 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
67}
68
69static int ati_remote2_get_channel_mask(char *buffer,
70 const struct kernel_param *kp)
71{
72 pr_debug("%s()\n", __func__);
73
74 return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
75}
76
77static int ati_remote2_set_mode_mask(const char *val,
78 const struct kernel_param *kp)
79{
80 pr_debug("%s()\n", __func__);
81
82 return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
83}
84
85static int ati_remote2_get_mode_mask(char *buffer,
86 const struct kernel_param *kp)
87{
88 pr_debug("%s()\n", __func__);
89
90 return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
91}
92
93static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
94#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
95static const struct kernel_param_ops param_ops_channel_mask = {
96 .set = ati_remote2_set_channel_mask,
97 .get = ati_remote2_get_channel_mask,
98};
99module_param(channel_mask, channel_mask, 0644);
100MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
101
102static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
103#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
104static const struct kernel_param_ops param_ops_mode_mask = {
105 .set = ati_remote2_set_mode_mask,
106 .get = ati_remote2_get_mode_mask,
107};
108module_param(mode_mask, mode_mask, 0644);
109MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
110
111static const struct usb_device_id ati_remote2_id_table[] = {
112 { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
113 { }
114};
115MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
116
117static DEFINE_MUTEX(ati_remote2_mutex);
118
119enum {
120 ATI_REMOTE2_OPENED = 0x1,
121 ATI_REMOTE2_SUSPENDED = 0x2,
122};
123
124enum {
125 ATI_REMOTE2_AUX1,
126 ATI_REMOTE2_AUX2,
127 ATI_REMOTE2_AUX3,
128 ATI_REMOTE2_AUX4,
129 ATI_REMOTE2_PC,
130 ATI_REMOTE2_MODES,
131};
132
133static const struct {
134 u8 hw_code;
135 u16 keycode;
136} ati_remote2_key_table[] = {
137 { 0x00, KEY_0 },
138 { 0x01, KEY_1 },
139 { 0x02, KEY_2 },
140 { 0x03, KEY_3 },
141 { 0x04, KEY_4 },
142 { 0x05, KEY_5 },
143 { 0x06, KEY_6 },
144 { 0x07, KEY_7 },
145 { 0x08, KEY_8 },
146 { 0x09, KEY_9 },
147 { 0x0c, KEY_POWER },
148 { 0x0d, KEY_MUTE },
149 { 0x10, KEY_VOLUMEUP },
150 { 0x11, KEY_VOLUMEDOWN },
151 { 0x20, KEY_CHANNELUP },
152 { 0x21, KEY_CHANNELDOWN },
153 { 0x28, KEY_FORWARD },
154 { 0x29, KEY_REWIND },
155 { 0x2c, KEY_PLAY },
156 { 0x30, KEY_PAUSE },
157 { 0x31, KEY_STOP },
158 { 0x37, KEY_RECORD },
159 { 0x38, KEY_DVD },
160 { 0x39, KEY_TV },
161 { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
162 { 0x54, KEY_MENU },
163 { 0x58, KEY_UP },
164 { 0x59, KEY_DOWN },
165 { 0x5a, KEY_LEFT },
166 { 0x5b, KEY_RIGHT },
167 { 0x5c, KEY_OK },
168 { 0x78, KEY_A },
169 { 0x79, KEY_B },
170 { 0x7a, KEY_C },
171 { 0x7b, KEY_D },
172 { 0x7c, KEY_E },
173 { 0x7d, KEY_F },
174 { 0x82, KEY_ENTER },
175 { 0x8e, KEY_VENDOR },
176 { 0x96, KEY_COFFEE },
177 { 0xa9, BTN_LEFT },
178 { 0xaa, BTN_RIGHT },
179 { 0xbe, KEY_QUESTION },
180 { 0xd0, KEY_EDIT },
181 { 0xd5, KEY_FRONT },
182 { 0xf9, KEY_INFO },
183};
184
185struct ati_remote2 {
186 struct input_dev *idev;
187 struct usb_device *udev;
188
189 struct usb_interface *intf[2];
190 struct usb_endpoint_descriptor *ep[2];
191 struct urb *urb[2];
192 void *buf[2];
193 dma_addr_t buf_dma[2];
194
195 unsigned long jiffies;
196 int mode;
197
198 char name[64];
199 char phys[64];
200
201 /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
202 u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
203
204 unsigned int flags;
205
206 unsigned int channel_mask;
207 unsigned int mode_mask;
208};
209
210static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
211static void ati_remote2_disconnect(struct usb_interface *interface);
212static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
213static int ati_remote2_resume(struct usb_interface *interface);
214static int ati_remote2_reset_resume(struct usb_interface *interface);
215static int ati_remote2_pre_reset(struct usb_interface *interface);
216static int ati_remote2_post_reset(struct usb_interface *interface);
217
218static struct usb_driver ati_remote2_driver = {
219 .name = "ati_remote2",
220 .probe = ati_remote2_probe,
221 .disconnect = ati_remote2_disconnect,
222 .id_table = ati_remote2_id_table,
223 .suspend = ati_remote2_suspend,
224 .resume = ati_remote2_resume,
225 .reset_resume = ati_remote2_reset_resume,
226 .pre_reset = ati_remote2_pre_reset,
227 .post_reset = ati_remote2_post_reset,
228 .supports_autosuspend = 1,
229};
230
231static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
232{
233 int r;
234
235 r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
236 if (r) {
237 dev_err(&ar2->intf[0]->dev,
238 "%s(): usb_submit_urb() = %d\n", __func__, r);
239 return r;
240 }
241 r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
242 if (r) {
243 usb_kill_urb(ar2->urb[0]);
244 dev_err(&ar2->intf[1]->dev,
245 "%s(): usb_submit_urb() = %d\n", __func__, r);
246 return r;
247 }
248
249 return 0;
250}
251
252static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
253{
254 usb_kill_urb(ar2->urb[1]);
255 usb_kill_urb(ar2->urb[0]);
256}
257
258static int ati_remote2_open(struct input_dev *idev)
259{
260 struct ati_remote2 *ar2 = input_get_drvdata(idev);
261 int r;
262
263 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
264
265 r = usb_autopm_get_interface(ar2->intf[0]);
266 if (r) {
267 dev_err(&ar2->intf[0]->dev,
268 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
269 goto fail1;
270 }
271
272 mutex_lock(&ati_remote2_mutex);
273
274 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
275 r = ati_remote2_submit_urbs(ar2);
276 if (r)
277 goto fail2;
278 }
279
280 ar2->flags |= ATI_REMOTE2_OPENED;
281
282 mutex_unlock(&ati_remote2_mutex);
283
284 usb_autopm_put_interface(ar2->intf[0]);
285
286 return 0;
287
288 fail2:
289 mutex_unlock(&ati_remote2_mutex);
290 usb_autopm_put_interface(ar2->intf[0]);
291 fail1:
292 return r;
293}
294
295static void ati_remote2_close(struct input_dev *idev)
296{
297 struct ati_remote2 *ar2 = input_get_drvdata(idev);
298
299 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
300
301 mutex_lock(&ati_remote2_mutex);
302
303 if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
304 ati_remote2_kill_urbs(ar2);
305
306 ar2->flags &= ~ATI_REMOTE2_OPENED;
307
308 mutex_unlock(&ati_remote2_mutex);
309}
310
311static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
312{
313 struct input_dev *idev = ar2->idev;
314 u8 *data = ar2->buf[0];
315 int channel, mode;
316
317 channel = data[0] >> 4;
318
319 if (!((1 << channel) & ar2->channel_mask))
320 return;
321
322 mode = data[0] & 0x0F;
323
324 if (mode > ATI_REMOTE2_PC) {
325 dev_err(&ar2->intf[0]->dev,
326 "Unknown mode byte (%02x %02x %02x %02x)\n",
327 data[3], data[2], data[1], data[0]);
328 return;
329 }
330
331 if (!((1 << mode) & ar2->mode_mask))
332 return;
333
334 input_event(idev, EV_REL, REL_X, (s8) data[1]);
335 input_event(idev, EV_REL, REL_Y, (s8) data[2]);
336 input_sync(idev);
337}
338
339static int ati_remote2_lookup(unsigned int hw_code)
340{
341 int i;
342
343 for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
344 if (ati_remote2_key_table[i].hw_code == hw_code)
345 return i;
346
347 return -1;
348}
349
350static void ati_remote2_input_key(struct ati_remote2 *ar2)
351{
352 struct input_dev *idev = ar2->idev;
353 u8 *data = ar2->buf[1];
354 int channel, mode, hw_code, index;
355
356 channel = data[0] >> 4;
357
358 if (!((1 << channel) & ar2->channel_mask))
359 return;
360
361 mode = data[0] & 0x0F;
362
363 if (mode > ATI_REMOTE2_PC) {
364 dev_err(&ar2->intf[1]->dev,
365 "Unknown mode byte (%02x %02x %02x %02x)\n",
366 data[3], data[2], data[1], data[0]);
367 return;
368 }
369
370 hw_code = data[2];
371 if (hw_code == 0x3f) {
372 /*
373 * For some incomprehensible reason the mouse pad generates
374 * events which look identical to the events from the last
375 * pressed mode key. Naturally we don't want to generate key
376 * events for the mouse pad so we filter out any subsequent
377 * events from the same mode key.
378 */
379 if (ar2->mode == mode)
380 return;
381
382 if (data[1] == 0)
383 ar2->mode = mode;
384 }
385
386 if (!((1 << mode) & ar2->mode_mask))
387 return;
388
389 index = ati_remote2_lookup(hw_code);
390 if (index < 0) {
391 dev_err(&ar2->intf[1]->dev,
392 "Unknown code byte (%02x %02x %02x %02x)\n",
393 data[3], data[2], data[1], data[0]);
394 return;
395 }
396
397 switch (data[1]) {
398 case 0: /* release */
399 break;
400 case 1: /* press */
401 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
402 break;
403 case 2: /* repeat */
404
405 /* No repeat for mouse buttons. */
406 if (ar2->keycode[mode][index] == BTN_LEFT ||
407 ar2->keycode[mode][index] == BTN_RIGHT)
408 return;
409
410 if (!time_after_eq(jiffies, ar2->jiffies))
411 return;
412
413 ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
414 break;
415 default:
416 dev_err(&ar2->intf[1]->dev,
417 "Unknown state byte (%02x %02x %02x %02x)\n",
418 data[3], data[2], data[1], data[0]);
419 return;
420 }
421
422 input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
423 input_sync(idev);
424}
425
426static void ati_remote2_complete_mouse(struct urb *urb)
427{
428 struct ati_remote2 *ar2 = urb->context;
429 int r;
430
431 switch (urb->status) {
432 case 0:
433 usb_mark_last_busy(ar2->udev);
434 ati_remote2_input_mouse(ar2);
435 break;
436 case -ENOENT:
437 case -EILSEQ:
438 case -ECONNRESET:
439 case -ESHUTDOWN:
440 dev_dbg(&ar2->intf[0]->dev,
441 "%s(): urb status = %d\n", __func__, urb->status);
442 return;
443 default:
444 usb_mark_last_busy(ar2->udev);
445 dev_err(&ar2->intf[0]->dev,
446 "%s(): urb status = %d\n", __func__, urb->status);
447 }
448
449 r = usb_submit_urb(urb, GFP_ATOMIC);
450 if (r)
451 dev_err(&ar2->intf[0]->dev,
452 "%s(): usb_submit_urb() = %d\n", __func__, r);
453}
454
455static void ati_remote2_complete_key(struct urb *urb)
456{
457 struct ati_remote2 *ar2 = urb->context;
458 int r;
459
460 switch (urb->status) {
461 case 0:
462 usb_mark_last_busy(ar2->udev);
463 ati_remote2_input_key(ar2);
464 break;
465 case -ENOENT:
466 case -EILSEQ:
467 case -ECONNRESET:
468 case -ESHUTDOWN:
469 dev_dbg(&ar2->intf[1]->dev,
470 "%s(): urb status = %d\n", __func__, urb->status);
471 return;
472 default:
473 usb_mark_last_busy(ar2->udev);
474 dev_err(&ar2->intf[1]->dev,
475 "%s(): urb status = %d\n", __func__, urb->status);
476 }
477
478 r = usb_submit_urb(urb, GFP_ATOMIC);
479 if (r)
480 dev_err(&ar2->intf[1]->dev,
481 "%s(): usb_submit_urb() = %d\n", __func__, r);
482}
483
484static int ati_remote2_getkeycode(struct input_dev *idev,
485 struct input_keymap_entry *ke)
486{
487 struct ati_remote2 *ar2 = input_get_drvdata(idev);
488 unsigned int mode;
489 int offset;
490 unsigned int index;
491 unsigned int scancode;
492
493 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
494 index = ke->index;
495 if (index >= ATI_REMOTE2_MODES *
496 ARRAY_SIZE(ati_remote2_key_table))
497 return -EINVAL;
498
499 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
500 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
501 scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code;
502 } else {
503 if (input_scancode_to_scalar(ke, &scancode))
504 return -EINVAL;
505
506 mode = scancode >> 8;
507 if (mode > ATI_REMOTE2_PC)
508 return -EINVAL;
509
510 offset = ati_remote2_lookup(scancode & 0xff);
511 if (offset < 0)
512 return -EINVAL;
513
514 index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset;
515 }
516
517 ke->keycode = ar2->keycode[mode][offset];
518 ke->len = sizeof(scancode);
519 memcpy(&ke->scancode, &scancode, sizeof(scancode));
520 ke->index = index;
521
522 return 0;
523}
524
525static int ati_remote2_setkeycode(struct input_dev *idev,
526 const struct input_keymap_entry *ke,
527 unsigned int *old_keycode)
528{
529 struct ati_remote2 *ar2 = input_get_drvdata(idev);
530 unsigned int mode;
531 int offset;
532 unsigned int index;
533 unsigned int scancode;
534
535 if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
536 if (ke->index >= ATI_REMOTE2_MODES *
537 ARRAY_SIZE(ati_remote2_key_table))
538 return -EINVAL;
539
540 mode = ke->index / ARRAY_SIZE(ati_remote2_key_table);
541 offset = ke->index % ARRAY_SIZE(ati_remote2_key_table);
542 } else {
543 if (input_scancode_to_scalar(ke, &scancode))
544 return -EINVAL;
545
546 mode = scancode >> 8;
547 if (mode > ATI_REMOTE2_PC)
548 return -EINVAL;
549
550 offset = ati_remote2_lookup(scancode & 0xff);
551 if (offset < 0)
552 return -EINVAL;
553 }
554
555 *old_keycode = ar2->keycode[mode][offset];
556 ar2->keycode[mode][offset] = ke->keycode;
557 __set_bit(ke->keycode, idev->keybit);
558
559 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
560 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
561 if (ar2->keycode[mode][index] == *old_keycode)
562 return 0;
563 }
564 }
565
566 __clear_bit(*old_keycode, idev->keybit);
567
568 return 0;
569}
570
571static int ati_remote2_input_init(struct ati_remote2 *ar2)
572{
573 struct input_dev *idev;
574 int index, mode, retval;
575
576 idev = input_allocate_device();
577 if (!idev)
578 return -ENOMEM;
579
580 ar2->idev = idev;
581 input_set_drvdata(idev, ar2);
582
583 idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
584 idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
585 BIT_MASK(BTN_RIGHT);
586 idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
587
588 for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
589 for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
590 ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
591 __set_bit(ar2->keycode[mode][index], idev->keybit);
592 }
593 }
594
595 /* AUX1-AUX4 and PC generate the same scancode. */
596 index = ati_remote2_lookup(0x3f);
597 ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
598 ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
599 ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
600 ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
601 ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
602 __set_bit(KEY_PROG1, idev->keybit);
603 __set_bit(KEY_PROG2, idev->keybit);
604 __set_bit(KEY_PROG3, idev->keybit);
605 __set_bit(KEY_PROG4, idev->keybit);
606 __set_bit(KEY_PC, idev->keybit);
607
608 idev->rep[REP_DELAY] = 250;
609 idev->rep[REP_PERIOD] = 33;
610
611 idev->open = ati_remote2_open;
612 idev->close = ati_remote2_close;
613
614 idev->getkeycode = ati_remote2_getkeycode;
615 idev->setkeycode = ati_remote2_setkeycode;
616
617 idev->name = ar2->name;
618 idev->phys = ar2->phys;
619
620 usb_to_input_id(ar2->udev, &idev->id);
621 idev->dev.parent = &ar2->udev->dev;
622
623 retval = input_register_device(idev);
624 if (retval)
625 input_free_device(idev);
626
627 return retval;
628}
629
630static int ati_remote2_urb_init(struct ati_remote2 *ar2)
631{
632 struct usb_device *udev = ar2->udev;
633 int i, pipe, maxp;
634
635 for (i = 0; i < 2; i++) {
636 ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
637 if (!ar2->buf[i])
638 return -ENOMEM;
639
640 ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
641 if (!ar2->urb[i])
642 return -ENOMEM;
643
644 pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
645 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
646 maxp = maxp > 4 ? 4 : maxp;
647
648 usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
649 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
650 ar2, ar2->ep[i]->bInterval);
651 ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
652 ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
653 }
654
655 return 0;
656}
657
658static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
659{
660 int i;
661
662 for (i = 0; i < 2; i++) {
663 usb_free_urb(ar2->urb[i]);
664 usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
665 }
666}
667
668static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
669{
670 int r, i, channel;
671
672 /*
673 * Configure receiver to only accept input from remote "channel"
674 * channel == 0 -> Accept input from any remote channel
675 * channel == 1 -> Only accept input from remote channel 1
676 * channel == 2 -> Only accept input from remote channel 2
677 * ...
678 * channel == 16 -> Only accept input from remote channel 16
679 */
680
681 channel = 0;
682 for (i = 0; i < 16; i++) {
683 if ((1 << i) & ch_mask) {
684 if (!(~(1 << i) & ch_mask))
685 channel = i + 1;
686 break;
687 }
688 }
689
690 r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
691 0x20,
692 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
693 channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
694 if (r) {
695 dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
696 __func__, r);
697 return r;
698 }
699
700 return 0;
701}
702
703static ssize_t ati_remote2_show_channel_mask(struct device *dev,
704 struct device_attribute *attr,
705 char *buf)
706{
707 struct usb_device *udev = to_usb_device(dev);
708 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
709 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
710
711 return sprintf(buf, "0x%04x\n", ar2->channel_mask);
712}
713
714static ssize_t ati_remote2_store_channel_mask(struct device *dev,
715 struct device_attribute *attr,
716 const char *buf, size_t count)
717{
718 struct usb_device *udev = to_usb_device(dev);
719 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
720 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
721 unsigned int mask;
722 int r;
723
724 r = kstrtouint(buf, 0, &mask);
725 if (r)
726 return r;
727
728 if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
729 return -EINVAL;
730
731 r = usb_autopm_get_interface(ar2->intf[0]);
732 if (r) {
733 dev_err(&ar2->intf[0]->dev,
734 "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
735 return r;
736 }
737
738 mutex_lock(&ati_remote2_mutex);
739
740 if (mask != ar2->channel_mask) {
741 r = ati_remote2_setup(ar2, mask);
742 if (!r)
743 ar2->channel_mask = mask;
744 }
745
746 mutex_unlock(&ati_remote2_mutex);
747
748 usb_autopm_put_interface(ar2->intf[0]);
749
750 return r ? r : count;
751}
752
753static ssize_t ati_remote2_show_mode_mask(struct device *dev,
754 struct device_attribute *attr,
755 char *buf)
756{
757 struct usb_device *udev = to_usb_device(dev);
758 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
759 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
760
761 return sprintf(buf, "0x%02x\n", ar2->mode_mask);
762}
763
764static ssize_t ati_remote2_store_mode_mask(struct device *dev,
765 struct device_attribute *attr,
766 const char *buf, size_t count)
767{
768 struct usb_device *udev = to_usb_device(dev);
769 struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
770 struct ati_remote2 *ar2 = usb_get_intfdata(intf);
771 unsigned int mask;
772 int err;
773
774 err = kstrtouint(buf, 0, &mask);
775 if (err)
776 return err;
777
778 if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
779 return -EINVAL;
780
781 ar2->mode_mask = mask;
782
783 return count;
784}
785
786static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
787 ati_remote2_store_channel_mask);
788
789static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
790 ati_remote2_store_mode_mask);
791
792static struct attribute *ati_remote2_attrs[] = {
793 &dev_attr_channel_mask.attr,
794 &dev_attr_mode_mask.attr,
795 NULL,
796};
797
798static struct attribute_group ati_remote2_attr_group = {
799 .attrs = ati_remote2_attrs,
800};
801
802static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
803{
804 struct usb_device *udev = interface_to_usbdev(interface);
805 struct usb_host_interface *alt = interface->cur_altsetting;
806 struct ati_remote2 *ar2;
807 int r;
808
809 if (alt->desc.bInterfaceNumber)
810 return -ENODEV;
811
812 ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
813 if (!ar2)
814 return -ENOMEM;
815
816 ar2->udev = udev;
817
818 /* Sanity check, first interface must have an endpoint */
819 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
820 dev_err(&interface->dev,
821 "%s(): interface 0 must have an endpoint\n", __func__);
822 r = -ENODEV;
823 goto fail1;
824 }
825 ar2->intf[0] = interface;
826 ar2->ep[0] = &alt->endpoint[0].desc;
827
828 /* Sanity check, the device must have two interfaces */
829 ar2->intf[1] = usb_ifnum_to_if(udev, 1);
830 if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) {
831 dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n",
832 __func__, udev->actconfig->desc.bNumInterfaces);
833 r = -ENODEV;
834 goto fail1;
835 }
836
837 r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
838 if (r)
839 goto fail1;
840
841 /* Sanity check, second interface must have an endpoint */
842 alt = ar2->intf[1]->cur_altsetting;
843 if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) {
844 dev_err(&interface->dev,
845 "%s(): interface 1 must have an endpoint\n", __func__);
846 r = -ENODEV;
847 goto fail2;
848 }
849 ar2->ep[1] = &alt->endpoint[0].desc;
850
851 r = ati_remote2_urb_init(ar2);
852 if (r)
853 goto fail3;
854
855 ar2->channel_mask = channel_mask;
856 ar2->mode_mask = mode_mask;
857
858 r = ati_remote2_setup(ar2, ar2->channel_mask);
859 if (r)
860 goto fail3;
861
862 usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
863 strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
864
865 strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
866
867 r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
868 if (r)
869 goto fail3;
870
871 r = ati_remote2_input_init(ar2);
872 if (r)
873 goto fail4;
874
875 usb_set_intfdata(interface, ar2);
876
877 interface->needs_remote_wakeup = 1;
878
879 return 0;
880
881 fail4:
882 sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
883 fail3:
884 ati_remote2_urb_cleanup(ar2);
885 fail2:
886 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
887 fail1:
888 kfree(ar2);
889
890 return r;
891}
892
893static void ati_remote2_disconnect(struct usb_interface *interface)
894{
895 struct ati_remote2 *ar2;
896 struct usb_host_interface *alt = interface->cur_altsetting;
897
898 if (alt->desc.bInterfaceNumber)
899 return;
900
901 ar2 = usb_get_intfdata(interface);
902 usb_set_intfdata(interface, NULL);
903
904 input_unregister_device(ar2->idev);
905
906 sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
907
908 ati_remote2_urb_cleanup(ar2);
909
910 usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
911
912 kfree(ar2);
913}
914
915static int ati_remote2_suspend(struct usb_interface *interface,
916 pm_message_t message)
917{
918 struct ati_remote2 *ar2;
919 struct usb_host_interface *alt = interface->cur_altsetting;
920
921 if (alt->desc.bInterfaceNumber)
922 return 0;
923
924 ar2 = usb_get_intfdata(interface);
925
926 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
927
928 mutex_lock(&ati_remote2_mutex);
929
930 if (ar2->flags & ATI_REMOTE2_OPENED)
931 ati_remote2_kill_urbs(ar2);
932
933 ar2->flags |= ATI_REMOTE2_SUSPENDED;
934
935 mutex_unlock(&ati_remote2_mutex);
936
937 return 0;
938}
939
940static int ati_remote2_resume(struct usb_interface *interface)
941{
942 struct ati_remote2 *ar2;
943 struct usb_host_interface *alt = interface->cur_altsetting;
944 int r = 0;
945
946 if (alt->desc.bInterfaceNumber)
947 return 0;
948
949 ar2 = usb_get_intfdata(interface);
950
951 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
952
953 mutex_lock(&ati_remote2_mutex);
954
955 if (ar2->flags & ATI_REMOTE2_OPENED)
956 r = ati_remote2_submit_urbs(ar2);
957
958 if (!r)
959 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
960
961 mutex_unlock(&ati_remote2_mutex);
962
963 return r;
964}
965
966static int ati_remote2_reset_resume(struct usb_interface *interface)
967{
968 struct ati_remote2 *ar2;
969 struct usb_host_interface *alt = interface->cur_altsetting;
970 int r = 0;
971
972 if (alt->desc.bInterfaceNumber)
973 return 0;
974
975 ar2 = usb_get_intfdata(interface);
976
977 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
978
979 mutex_lock(&ati_remote2_mutex);
980
981 r = ati_remote2_setup(ar2, ar2->channel_mask);
982 if (r)
983 goto out;
984
985 if (ar2->flags & ATI_REMOTE2_OPENED)
986 r = ati_remote2_submit_urbs(ar2);
987
988 if (!r)
989 ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
990
991 out:
992 mutex_unlock(&ati_remote2_mutex);
993
994 return r;
995}
996
997static int ati_remote2_pre_reset(struct usb_interface *interface)
998{
999 struct ati_remote2 *ar2;
1000 struct usb_host_interface *alt = interface->cur_altsetting;
1001
1002 if (alt->desc.bInterfaceNumber)
1003 return 0;
1004
1005 ar2 = usb_get_intfdata(interface);
1006
1007 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1008
1009 mutex_lock(&ati_remote2_mutex);
1010
1011 if (ar2->flags == ATI_REMOTE2_OPENED)
1012 ati_remote2_kill_urbs(ar2);
1013
1014 return 0;
1015}
1016
1017static int ati_remote2_post_reset(struct usb_interface *interface)
1018{
1019 struct ati_remote2 *ar2;
1020 struct usb_host_interface *alt = interface->cur_altsetting;
1021 int r = 0;
1022
1023 if (alt->desc.bInterfaceNumber)
1024 return 0;
1025
1026 ar2 = usb_get_intfdata(interface);
1027
1028 dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
1029
1030 if (ar2->flags == ATI_REMOTE2_OPENED)
1031 r = ati_remote2_submit_urbs(ar2);
1032
1033 mutex_unlock(&ati_remote2_mutex);
1034
1035 return r;
1036}
1037
1038module_usb_driver(ati_remote2_driver);