Loading...
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_MTK
23 tristate
24 select FW_LOADER
25
26config BT_HCIBTUSB
27 tristate "HCI USB driver"
28 depends on USB
29 select BT_INTEL
30 help
31 Bluetooth HCI USB driver.
32 This driver is required if you want to use Bluetooth devices with
33 USB interface.
34
35 Say Y here to compile support for Bluetooth USB devices into the
36 kernel or say M to compile it as module (btusb).
37
38config BT_HCIBTUSB_AUTOSUSPEND
39 bool "Enable USB autosuspend for Bluetooth USB devices by default"
40 depends on BT_HCIBTUSB
41 help
42 Say Y here to enable USB autosuspend for Bluetooth USB devices by
43 default.
44
45 This can be overridden by passing btusb.enable_autosuspend=[y|n]
46 on the kernel commandline.
47
48config BT_HCIBTUSB_POLL_SYNC
49 bool "Enable USB poll_sync for Bluetooth USB devices by default"
50 depends on BT_HCIBTUSB
51 default y
52 help
53 poll_sync synchronizes the USB data and event endpoints by
54 prioritizing the later.
55
56 Say Y here to enable USB poll_sync for Bluetooth USB devices by
57 default.
58
59config BT_HCIBTUSB_BCM
60 bool "Broadcom protocol support"
61 depends on BT_HCIBTUSB
62 select BT_BCM
63 default y
64 help
65 The Broadcom protocol support enables firmware and patchram
66 download support for Broadcom Bluetooth controllers.
67
68 Say Y here to compile support for Broadcom protocol.
69
70config BT_HCIBTUSB_MTK
71 bool "MediaTek protocol support"
72 depends on BT_HCIBTUSB
73 select BT_MTK
74 default n
75 help
76 The MediaTek protocol support enables firmware download
77 support and chip initialization for MediaTek Bluetooth
78 USB controllers.
79
80 Say Y here to compile support for MediaTek protocol.
81
82config BT_HCIBTUSB_RTL
83 bool "Realtek protocol support"
84 depends on BT_HCIBTUSB
85 select BT_RTL
86 default y
87 help
88 The Realtek protocol support enables firmware and configuration
89 download support for Realtek Bluetooth controllers.
90
91 Say Y here to compile support for Realtek protocol.
92
93config BT_HCIBTSDIO
94 tristate "HCI SDIO driver"
95 depends on MMC
96 help
97 Bluetooth HCI SDIO driver.
98 This driver is required if you want to use Bluetooth device with
99 SDIO interface.
100
101 Say Y here to compile support for Bluetooth SDIO devices into the
102 kernel or say M to compile it as module (btsdio).
103
104config BT_HCIUART
105 tristate "HCI UART driver"
106 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
107 depends on NVMEM || !NVMEM
108 depends on TTY
109 help
110 Bluetooth HCI UART driver.
111 This driver is required if you want to use Bluetooth devices with
112 serial port interface. You will also need this driver if you have
113 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
114 adapter and BrainBoxes Bluetooth PC Card.
115
116 Say Y here to compile support for Bluetooth UART devices into the
117 kernel or say M to compile it as module (hci_uart).
118
119config BT_HCIUART_SERDEV
120 bool
121 depends on SERIAL_DEV_BUS && BT_HCIUART
122 default y
123
124config BT_HCIUART_H4
125 bool "UART (H4) protocol support"
126 depends on BT_HCIUART
127 help
128 UART (H4) is serial protocol for communication between Bluetooth
129 device and host. This protocol is required for most Bluetooth devices
130 with UART interface, including PCMCIA and CF cards.
131
132 Say Y here to compile support for HCI UART (H4) protocol.
133
134config BT_HCIUART_NOKIA
135 tristate "UART Nokia H4+ protocol support"
136 depends on BT_HCIUART
137 depends on BT_HCIUART_SERDEV
138 depends on GPIOLIB
139 depends on PM
140 select BT_HCIUART_H4
141 select BT_BCM
142 help
143 Nokia H4+ is serial protocol for communication between Bluetooth
144 device and host. This protocol is required for Bluetooth devices
145 with UART interface in Nokia devices.
146
147 Say Y here to compile support for Nokia's H4+ protocol.
148
149config BT_HCIUART_BCSP
150 bool "BCSP protocol support"
151 depends on BT_HCIUART
152 select BITREVERSE
153 help
154 BCSP (BlueCore Serial Protocol) is serial protocol for communication
155 between Bluetooth device and host. This protocol is required for non
156 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
157 CF cards.
158
159 Say Y here to compile support for HCI BCSP protocol.
160
161config BT_HCIUART_ATH3K
162 bool "Atheros AR300x serial support"
163 depends on BT_HCIUART
164 select BT_HCIUART_H4
165 help
166 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
167 communication between host and Atheros AR300x Bluetooth devices.
168 This protocol enables AR300x chips to be enabled with
169 power management support.
170 Enable this if you have Atheros AR300x serial Bluetooth device.
171
172 Say Y here to compile support for HCI UART ATH3K protocol.
173
174config BT_HCIUART_LL
175 bool "HCILL protocol support"
176 depends on BT_HCIUART_SERDEV
177 select BT_HCIUART_H4
178 help
179 HCILL (HCI Low Level) is a serial protocol for communication
180 between Bluetooth device and host. This protocol is required for
181 serial Bluetooth devices that are based on Texas Instruments'
182 BRF chips.
183
184 Say Y here to compile support for HCILL protocol.
185
186config BT_HCIUART_3WIRE
187 bool "Three-wire UART (H5) protocol support"
188 depends on BT_HCIUART
189 depends on BT_HCIUART_SERDEV
190 help
191 The HCI Three-wire UART Transport Layer makes it possible to
192 user the Bluetooth HCI over a serial port interface. The HCI
193 Three-wire UART Transport Layer assumes that the UART
194 communication may have bit errors, overrun errors or burst
195 errors and thereby making CTS/RTS lines unnecessary.
196
197 Say Y here to compile support for Three-wire UART protocol.
198
199config BT_HCIUART_INTEL
200 bool "Intel protocol support"
201 depends on BT_HCIUART
202 depends on GPIOLIB
203 select BT_HCIUART_H4
204 select BT_INTEL
205 help
206 The Intel protocol support enables Bluetooth HCI over serial
207 port interface for Intel Bluetooth controllers.
208
209 Say Y here to compile support for Intel protocol.
210
211config BT_HCIUART_BCM
212 bool "Broadcom protocol support"
213 depends on BT_HCIUART
214 depends on BT_HCIUART_SERDEV
215 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
216 depends on GPIOLIB
217 select BT_HCIUART_H4
218 select BT_BCM
219 help
220 The Broadcom protocol support enables Bluetooth HCI over serial
221 port interface for Broadcom Bluetooth controllers.
222
223 Say Y here to compile support for Broadcom protocol.
224
225config BT_HCIUART_RTL
226 bool "Realtek protocol support"
227 depends on BT_HCIUART
228 depends on BT_HCIUART_SERDEV
229 depends on GPIOLIB
230 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
231 select BT_HCIUART_3WIRE
232 select BT_RTL
233 help
234 The Realtek protocol support enables Bluetooth HCI over 3-Wire
235 serial port interface for Realtek Bluetooth controllers.
236
237 Say Y here to compile support for Realtek protocol.
238
239config BT_HCIUART_QCA
240 bool "Qualcomm Atheros protocol support"
241 depends on BT_HCIUART
242 depends on BT_HCIUART_SERDEV
243 select BT_HCIUART_H4
244 select BT_QCA
245 help
246 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
247 over serial port interface(H4) between controller and host.
248 This protocol is required for UART clock control for QCA Bluetooth
249 devices.
250
251 Say Y here to compile support for QCA protocol.
252
253config BT_HCIUART_AG6XX
254 bool "Intel AG6XX protocol support"
255 depends on BT_HCIUART
256 select BT_HCIUART_H4
257 select BT_INTEL
258 help
259 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
260 port interface for Intel ibt 2.1 Bluetooth controllers.
261
262 Say Y here to compile support for Intel AG6XX protocol.
263
264config BT_HCIUART_MRVL
265 bool "Marvell protocol support"
266 depends on BT_HCIUART
267 depends on BT_HCIUART_SERDEV
268 select BT_HCIUART_H4
269 help
270 Marvell is serial protocol for communication between Bluetooth
271 device and host. This protocol is required for most Marvell Bluetooth
272 devices with UART interface.
273
274 Say Y here to compile support for HCI MRVL protocol.
275
276config BT_HCIBCM203X
277 tristate "HCI BCM203x USB driver"
278 depends on USB
279 select FW_LOADER
280 help
281 Bluetooth HCI BCM203x USB driver.
282 This driver provides the firmware loading mechanism for the Broadcom
283 Blutonium based devices.
284
285 Say Y here to compile support for HCI BCM203x devices into the
286 kernel or say M to compile it as module (bcm203x).
287
288
289config BT_HCIBCM4377
290 tristate "HCI BCM4377/4378/4387 PCIe driver"
291 depends on PCI
292 select FW_LOADER
293 help
294 Support for Broadcom BCM4377/4378/4387 Bluetooth chipsets attached via
295 PCIe. These are usually found in Apple machines.
296
297 Say Y here to compile support for HCI BCM4377 family devices into the
298 kernel or say M to compile it as module (hci_bcm4377).
299
300config BT_HCIBPA10X
301 tristate "HCI BPA10x USB driver"
302 depends on USB
303 help
304 Bluetooth HCI BPA10x USB driver.
305 This driver provides support for the Digianswer BPA 100/105 Bluetooth
306 sniffer devices.
307
308 Say Y here to compile support for HCI BPA10x devices into the
309 kernel or say M to compile it as module (bpa10x).
310
311config BT_HCIBFUSB
312 tristate "HCI BlueFRITZ! USB driver"
313 depends on USB
314 select FW_LOADER
315 help
316 Bluetooth HCI BlueFRITZ! USB driver.
317 This driver provides support for Bluetooth USB devices with AVM
318 interface:
319 AVM BlueFRITZ! USB
320
321 Say Y here to compile support for HCI BFUSB devices into the
322 kernel or say M to compile it as module (bfusb).
323
324config BT_HCIDTL1
325 tristate "HCI DTL1 (PC Card) driver"
326 depends on PCMCIA
327 help
328 Bluetooth HCI DTL1 (PC Card) driver.
329 This driver provides support for Bluetooth PCMCIA devices with
330 Nokia DTL1 interface:
331 Nokia Bluetooth Card
332 Socket Bluetooth CF Card
333
334 Say Y here to compile support for HCI DTL1 devices into the
335 kernel or say M to compile it as module (dtl1_cs).
336
337config BT_HCIBT3C
338 tristate "HCI BT3C (PC Card) driver"
339 depends on PCMCIA
340 select FW_LOADER
341 help
342 Bluetooth HCI BT3C (PC Card) driver.
343 This driver provides support for Bluetooth PCMCIA devices with
344 3Com BT3C interface:
345 3Com Bluetooth Card (3CRWB6096)
346 HP Bluetooth Card
347
348 Say Y here to compile support for HCI BT3C devices into the
349 kernel or say M to compile it as module (bt3c_cs).
350
351config BT_HCIBLUECARD
352 tristate "HCI BlueCard (PC Card) driver"
353 depends on PCMCIA
354 help
355 Bluetooth HCI BlueCard (PC Card) driver.
356 This driver provides support for Bluetooth PCMCIA devices with
357 Anycom BlueCard interface:
358 Anycom Bluetooth PC Card
359 Anycom Bluetooth CF Card
360
361 Say Y here to compile support for HCI BlueCard devices into the
362 kernel or say M to compile it as module (bluecard_cs).
363
364config BT_HCIVHCI
365 tristate "HCI VHCI (Virtual HCI device) driver"
366 help
367 Bluetooth Virtual HCI device driver.
368 This driver is required if you want to use HCI Emulation software.
369
370 Say Y here to compile support for virtual HCI devices into the
371 kernel or say M to compile it as module (hci_vhci).
372
373config BT_MRVL
374 tristate "Marvell Bluetooth driver support"
375 help
376 The core driver to support Marvell Bluetooth devices.
377
378 This driver is required if you want to support
379 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
380
381 Say Y here to compile Marvell Bluetooth driver
382 into the kernel or say M to compile it as module.
383
384config BT_MRVL_SDIO
385 tristate "Marvell BT-over-SDIO driver"
386 depends on BT_MRVL && MMC
387 select FW_LOADER
388 select WANT_DEV_COREDUMP
389 help
390 The driver for Marvell Bluetooth chipsets with SDIO interface.
391
392 This driver is required if you want to use Marvell Bluetooth
393 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
394 chipsets are supported.
395
396 Say Y here to compile support for Marvell BT-over-SDIO driver
397 into the kernel or say M to compile it as module.
398
399config BT_ATH3K
400 tristate "Atheros firmware download driver"
401 depends on BT_HCIBTUSB
402 select FW_LOADER
403 help
404 Bluetooth firmware download driver.
405 This driver loads the firmware into the Atheros Bluetooth
406 chipset.
407
408 Say Y here to compile support for "Atheros firmware download driver"
409 into the kernel or say M to compile it as module (ath3k).
410
411config BT_MTKSDIO
412 tristate "MediaTek HCI SDIO driver"
413 depends on MMC
414 select BT_MTK
415 help
416 MediaTek Bluetooth HCI SDIO driver.
417 This driver is required if you want to use MediaTek Bluetooth
418 with SDIO interface.
419
420 Say Y here to compile support for MediaTek Bluetooth SDIO devices
421 into the kernel or say M to compile it as module (btmtksdio).
422
423config BT_MTKUART
424 tristate "MediaTek HCI UART driver"
425 depends on SERIAL_DEV_BUS
426 select BT_MTK
427 help
428 MediaTek Bluetooth HCI UART driver.
429 This driver is required if you want to use MediaTek Bluetooth
430 with serial interface.
431
432 Say Y here to compile support for MediaTek Bluetooth UART devices
433 into the kernel or say M to compile it as module (btmtkuart).
434
435config BT_QCOMSMD
436 tristate "Qualcomm SMD based HCI support"
437 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
438 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
439 select BT_QCA
440 help
441 Qualcomm SMD based HCI driver.
442 This driver is used to bridge HCI data onto the shared memory
443 channels to the WCNSS core.
444
445 Say Y here to compile support for HCI over Qualcomm SMD into the
446 kernel or say M to compile as a module.
447
448config BT_HCIRSI
449 tristate
450 help
451 Redpine BT driver.
452 This driver handles BT traffic from upper layers and pass
453 to the RSI_91x coex module for further scheduling to device
454
455 Say Y here to compile support for HCI over Redpine into the
456 kernel or say M to compile as a module.
457
458config BT_VIRTIO
459 tristate "Virtio Bluetooth driver"
460 depends on VIRTIO
461 help
462 Virtio Bluetooth support driver.
463 This driver supports Virtio Bluetooth devices.
464
465 Say Y here to compile support for HCI over Virtio into the
466 kernel or say M to compile as a module.
467
468endmenu
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_HCIBTUSB
23 tristate "HCI USB driver"
24 depends on USB
25 select BT_INTEL
26 help
27 Bluetooth HCI USB driver.
28 This driver is required if you want to use Bluetooth devices with
29 USB interface.
30
31 Say Y here to compile support for Bluetooth USB devices into the
32 kernel or say M to compile it as module (btusb).
33
34config BT_HCIBTUSB_AUTOSUSPEND
35 bool "Enable USB autosuspend for Bluetooth USB devices by default"
36 depends on BT_HCIBTUSB
37 help
38 Say Y here to enable USB autosuspend for Bluetooth USB devices by
39 default.
40
41 This can be overridden by passing btusb.enable_autosuspend=[y|n]
42 on the kernel commandline.
43
44config BT_HCIBTUSB_BCM
45 bool "Broadcom protocol support"
46 depends on BT_HCIBTUSB
47 select BT_BCM
48 default y
49 help
50 The Broadcom protocol support enables firmware and patchram
51 download support for Broadcom Bluetooth controllers.
52
53 Say Y here to compile support for Broadcom protocol.
54
55config BT_HCIBTUSB_RTL
56 bool "Realtek protocol support"
57 depends on BT_HCIBTUSB
58 select BT_RTL
59 default y
60 help
61 The Realtek protocol support enables firmware and configuration
62 download support for Realtek Bluetooth controllers.
63
64 Say Y here to compile support for Realtek protocol.
65
66config BT_HCIBTSDIO
67 tristate "HCI SDIO driver"
68 depends on MMC
69 help
70 Bluetooth HCI SDIO driver.
71 This driver is required if you want to use Bluetooth device with
72 SDIO interface.
73
74 Say Y here to compile support for Bluetooth SDIO devices into the
75 kernel or say M to compile it as module (btsdio).
76
77config BT_HCIUART
78 tristate "HCI UART driver"
79 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
80 depends on NVMEM || !NVMEM
81 depends on TTY
82 help
83 Bluetooth HCI UART driver.
84 This driver is required if you want to use Bluetooth devices with
85 serial port interface. You will also need this driver if you have
86 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
87 adapter and BrainBoxes Bluetooth PC Card.
88
89 Say Y here to compile support for Bluetooth UART devices into the
90 kernel or say M to compile it as module (hci_uart).
91
92config BT_HCIUART_SERDEV
93 bool
94 depends on SERIAL_DEV_BUS && BT_HCIUART
95 default y
96
97config BT_HCIUART_H4
98 bool "UART (H4) protocol support"
99 depends on BT_HCIUART
100 help
101 UART (H4) is serial protocol for communication between Bluetooth
102 device and host. This protocol is required for most Bluetooth devices
103 with UART interface, including PCMCIA and CF cards.
104
105 Say Y here to compile support for HCI UART (H4) protocol.
106
107config BT_HCIUART_NOKIA
108 tristate "UART Nokia H4+ protocol support"
109 depends on BT_HCIUART
110 depends on BT_HCIUART_SERDEV
111 depends on GPIOLIB
112 depends on PM
113 select BT_HCIUART_H4
114 select BT_BCM
115 help
116 Nokia H4+ is serial protocol for communication between Bluetooth
117 device and host. This protocol is required for Bluetooth devices
118 with UART interface in Nokia devices.
119
120 Say Y here to compile support for Nokia's H4+ protocol.
121
122config BT_HCIUART_BCSP
123 bool "BCSP protocol support"
124 depends on BT_HCIUART
125 select BITREVERSE
126 help
127 BCSP (BlueCore Serial Protocol) is serial protocol for communication
128 between Bluetooth device and host. This protocol is required for non
129 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
130 CF cards.
131
132 Say Y here to compile support for HCI BCSP protocol.
133
134config BT_HCIUART_ATH3K
135 bool "Atheros AR300x serial support"
136 depends on BT_HCIUART
137 select BT_HCIUART_H4
138 help
139 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
140 communication between host and Atheros AR300x Bluetooth devices.
141 This protocol enables AR300x chips to be enabled with
142 power management support.
143 Enable this if you have Atheros AR300x serial Bluetooth device.
144
145 Say Y here to compile support for HCI UART ATH3K protocol.
146
147config BT_HCIUART_LL
148 bool "HCILL protocol support"
149 depends on BT_HCIUART_SERDEV
150 select BT_HCIUART_H4
151 help
152 HCILL (HCI Low Level) is a serial protocol for communication
153 between Bluetooth device and host. This protocol is required for
154 serial Bluetooth devices that are based on Texas Instruments'
155 BRF chips.
156
157 Say Y here to compile support for HCILL protocol.
158
159config BT_HCIUART_3WIRE
160 bool "Three-wire UART (H5) protocol support"
161 depends on BT_HCIUART
162 help
163 The HCI Three-wire UART Transport Layer makes it possible to
164 user the Bluetooth HCI over a serial port interface. The HCI
165 Three-wire UART Transport Layer assumes that the UART
166 communication may have bit errors, overrun errors or burst
167 errors and thereby making CTS/RTS lines unnecessary.
168
169 Say Y here to compile support for Three-wire UART protocol.
170
171config BT_HCIUART_INTEL
172 bool "Intel protocol support"
173 depends on BT_HCIUART
174 depends on GPIOLIB
175 select BT_HCIUART_H4
176 select BT_INTEL
177 help
178 The Intel protocol support enables Bluetooth HCI over serial
179 port interface for Intel Bluetooth controllers.
180
181 Say Y here to compile support for Intel protocol.
182
183config BT_HCIUART_BCM
184 bool "Broadcom protocol support"
185 depends on BT_HCIUART
186 depends on BT_HCIUART_SERDEV
187 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
188 depends on GPIOLIB
189 select BT_HCIUART_H4
190 select BT_BCM
191 help
192 The Broadcom protocol support enables Bluetooth HCI over serial
193 port interface for Broadcom Bluetooth controllers.
194
195 Say Y here to compile support for Broadcom protocol.
196
197config BT_HCIUART_QCA
198 bool "Qualcomm Atheros protocol support"
199 depends on BT_HCIUART
200 select BT_HCIUART_H4
201 select BT_QCA
202 help
203 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
204 over serial port interface(H4) between controller and host.
205 This protocol is required for UART clock control for QCA Bluetooth
206 devices.
207
208 Say Y here to compile support for QCA protocol.
209
210config BT_HCIUART_AG6XX
211 bool "Intel AG6XX protocol support"
212 depends on BT_HCIUART
213 select BT_HCIUART_H4
214 select BT_INTEL
215 help
216 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
217 port interface for Intel ibt 2.1 Bluetooth controllers.
218
219 Say Y here to compile support for Intel AG6XX protocol.
220
221config BT_HCIUART_MRVL
222 bool "Marvell protocol support"
223 depends on BT_HCIUART
224 select BT_HCIUART_H4
225 help
226 Marvell is serial protocol for communication between Bluetooth
227 device and host. This protocol is required for most Marvell Bluetooth
228 devices with UART interface.
229
230 Say Y here to compile support for HCI MRVL protocol.
231
232config BT_HCIBCM203X
233 tristate "HCI BCM203x USB driver"
234 depends on USB
235 select FW_LOADER
236 help
237 Bluetooth HCI BCM203x USB driver.
238 This driver provides the firmware loading mechanism for the Broadcom
239 Blutonium based devices.
240
241 Say Y here to compile support for HCI BCM203x devices into the
242 kernel or say M to compile it as module (bcm203x).
243
244config BT_HCIBPA10X
245 tristate "HCI BPA10x USB driver"
246 depends on USB
247 help
248 Bluetooth HCI BPA10x USB driver.
249 This driver provides support for the Digianswer BPA 100/105 Bluetooth
250 sniffer devices.
251
252 Say Y here to compile support for HCI BPA10x devices into the
253 kernel or say M to compile it as module (bpa10x).
254
255config BT_HCIBFUSB
256 tristate "HCI BlueFRITZ! USB driver"
257 depends on USB
258 select FW_LOADER
259 help
260 Bluetooth HCI BlueFRITZ! USB driver.
261 This driver provides support for Bluetooth USB devices with AVM
262 interface:
263 AVM BlueFRITZ! USB
264
265 Say Y here to compile support for HCI BFUSB devices into the
266 kernel or say M to compile it as module (bfusb).
267
268config BT_HCIDTL1
269 tristate "HCI DTL1 (PC Card) driver"
270 depends on PCMCIA
271 help
272 Bluetooth HCI DTL1 (PC Card) driver.
273 This driver provides support for Bluetooth PCMCIA devices with
274 Nokia DTL1 interface:
275 Nokia Bluetooth Card
276 Socket Bluetooth CF Card
277
278 Say Y here to compile support for HCI DTL1 devices into the
279 kernel or say M to compile it as module (dtl1_cs).
280
281config BT_HCIBT3C
282 tristate "HCI BT3C (PC Card) driver"
283 depends on PCMCIA
284 select FW_LOADER
285 help
286 Bluetooth HCI BT3C (PC Card) driver.
287 This driver provides support for Bluetooth PCMCIA devices with
288 3Com BT3C interface:
289 3Com Bluetooth Card (3CRWB6096)
290 HP Bluetooth Card
291
292 Say Y here to compile support for HCI BT3C devices into the
293 kernel or say M to compile it as module (bt3c_cs).
294
295config BT_HCIBLUECARD
296 tristate "HCI BlueCard (PC Card) driver"
297 depends on PCMCIA
298 help
299 Bluetooth HCI BlueCard (PC Card) driver.
300 This driver provides support for Bluetooth PCMCIA devices with
301 Anycom BlueCard interface:
302 Anycom Bluetooth PC Card
303 Anycom Bluetooth CF Card
304
305 Say Y here to compile support for HCI BlueCard devices into the
306 kernel or say M to compile it as module (bluecard_cs).
307
308config BT_HCIVHCI
309 tristate "HCI VHCI (Virtual HCI device) driver"
310 help
311 Bluetooth Virtual HCI device driver.
312 This driver is required if you want to use HCI Emulation software.
313
314 Say Y here to compile support for virtual HCI devices into the
315 kernel or say M to compile it as module (hci_vhci).
316
317config BT_MRVL
318 tristate "Marvell Bluetooth driver support"
319 help
320 The core driver to support Marvell Bluetooth devices.
321
322 This driver is required if you want to support
323 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
324
325 Say Y here to compile Marvell Bluetooth driver
326 into the kernel or say M to compile it as module.
327
328config BT_MRVL_SDIO
329 tristate "Marvell BT-over-SDIO driver"
330 depends on BT_MRVL && MMC
331 select FW_LOADER
332 select WANT_DEV_COREDUMP
333 help
334 The driver for Marvell Bluetooth chipsets with SDIO interface.
335
336 This driver is required if you want to use Marvell Bluetooth
337 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
338 chipsets are supported.
339
340 Say Y here to compile support for Marvell BT-over-SDIO driver
341 into the kernel or say M to compile it as module.
342
343config BT_ATH3K
344 tristate "Atheros firmware download driver"
345 depends on BT_HCIBTUSB
346 select FW_LOADER
347 help
348 Bluetooth firmware download driver.
349 This driver loads the firmware into the Atheros Bluetooth
350 chipset.
351
352 Say Y here to compile support for "Atheros firmware download driver"
353 into the kernel or say M to compile it as module (ath3k).
354
355config BT_WILINK
356 tristate "Texas Instruments WiLink7 driver"
357 depends on TI_ST
358 help
359 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
360 combo devices. This makes use of shared transport line discipline
361 core driver to communicate with the BT core of the combo chip.
362
363 Say Y here to compile support for Texas Instrument's WiLink7 driver
364 into the kernel or say M to compile it as module (btwilink).
365
366config BT_QCOMSMD
367 tristate "Qualcomm SMD based HCI support"
368 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
369 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
370 select BT_QCA
371 help
372 Qualcomm SMD based HCI driver.
373 This driver is used to bridge HCI data onto the shared memory
374 channels to the WCNSS core.
375
376 Say Y here to compile support for HCI over Qualcomm SMD into the
377 kernel or say M to compile as a module.
378
379config BT_HCIRSI
380 tristate
381 help
382 Redpine BT driver.
383 This driver handles BT traffic from upper layers and pass
384 to the RSI_91x coex module for further scheduling to device
385
386 Say Y here to compile support for HCI over Redpine into the
387 kernel or say M to compile as a module.
388
389endmenu