Linux Audio

Check our new training course

Buildroot integration, development and maintenance

Need a Buildroot system for your embedded project?
Loading...
v6.2
  1/* SPDX-License-Identifier: GPL-2.0-or-later */
  2/*
  3 * OpenRISC vmlinux.lds.S
  4 *
  5 * Linux architectural port borrowing liberally from similar works of
  6 * others.  All original copyrights apply as per the original source
  7 * declaration.
  8 *
  9 * Modifications for the OpenRISC architecture:
 10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
 11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
 12 *
 
 
 
 
 
 13 * ld script for OpenRISC architecture
 14 */
 15
 16/* TODO
 17 *		- clean up __offset & stuff
 18 *		- change all 8192 alignment to PAGE !!!
 19 *		- recheck if all alignments are really needed
 20 */
 21
 22#  define LOAD_OFFSET  PAGE_OFFSET
 23#  define LOAD_BASE    PAGE_OFFSET
 24
 25#include <asm/page.h>
 26#include <asm/cache.h>
 27#include <asm/thread_info.h>
 28#include <asm-generic/vmlinux.lds.h>
 29
 30#ifdef __OR1K__
 31#define __OUTPUT_FORMAT        "elf32-or1k"
 32#else
 33#define __OUTPUT_FORMAT        "elf32-or32"
 34#endif
 35
 36OUTPUT_FORMAT(__OUTPUT_FORMAT, __OUTPUT_FORMAT, __OUTPUT_FORMAT)
 37jiffies = jiffies_64 + 4;
 38
 39SECTIONS
 40{
 41        /* Read-only sections, merged into text segment: */
 42        . = LOAD_BASE ;
 43
 44	_text = .;
 45
 46	/* _s_kernel_ro must be page aligned */
 47	. = ALIGN(PAGE_SIZE);
 48	_s_kernel_ro = .;
 49
 50        .text                   : AT(ADDR(.text) - LOAD_OFFSET)
 51	{
 52          _stext = .;
 53	  TEXT_TEXT
 54	  SCHED_TEXT
 55	  CPUIDLE_TEXT
 56	  LOCK_TEXT
 57	  KPROBES_TEXT
 58	  IRQENTRY_TEXT
 59	  SOFTIRQENTRY_TEXT
 60	  *(.fixup)
 61	  *(.text.__*)
 62	  _etext = .;
 63	}
 64	/* TODO: Check if fixup and text.__* are really necessary
 65	 * fixup is definitely necessary
 66	 */
 67
 68	_sdata = .;
 69
 70	/* Page alignment required for RO_DATA */
 71	RO_DATA(PAGE_SIZE)
 72	_e_kernel_ro = .;
 73
 74	/* Whatever comes after _e_kernel_ro had better be page-aligend, too */
 75
 76	/* 32 here is cacheline size... recheck this */
 77	RW_DATA(32, PAGE_SIZE, PAGE_SIZE)
 78
 79        _edata  =  .;
 80
 81	EXCEPTION_TABLE(4)
 
 82
 83	/* Init code and data */
 84	. = ALIGN(PAGE_SIZE);
 85	__init_begin = .;
 86
 87	HEAD_TEXT_SECTION
 88
 89	/* Page aligned */
 90	INIT_TEXT_SECTION(PAGE_SIZE)
 91
 92	/* Align __setup_start on 16 byte boundary */
 93	INIT_DATA_SECTION(16)
 94
 95	PERCPU_SECTION(L1_CACHE_BYTES)
 96
 97        __init_end = .;
 98
 
 
 
 
 
 
 
 
 
 
 
 
 99	BSS_SECTION(0, 0, 0x20)
100
101        _end = .;
102
103	/* Throw in the debugging sections */
104	STABS_DEBUG
105	DWARF_DEBUG
106	ELF_DETAILS
107
108        /* Sections to be discarded -- must be last */
109	DISCARDS
110}
v4.17
 
  1/*
  2 * OpenRISC vmlinux.lds.S
  3 *
  4 * Linux architectural port borrowing liberally from similar works of
  5 * others.  All original copyrights apply as per the original source
  6 * declaration.
  7 *
  8 * Modifications for the OpenRISC architecture:
  9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
 10 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
 11 *
 12 *      This program is free software; you can redistribute it and/or
 13 *      modify it under the terms of the GNU General Public License
 14 *      as published by the Free Software Foundation; either version
 15 *      2 of the License, or (at your option) any later version.
 16 *
 17 * ld script for OpenRISC architecture
 18 */
 19
 20/* TODO
 21 *		- clean up __offset & stuff
 22 *		- change all 8192 alignment to PAGE !!!
 23 *		- recheck if all alignments are really needed
 24 */
 25
 26#  define LOAD_OFFSET  PAGE_OFFSET
 27#  define LOAD_BASE    PAGE_OFFSET
 28
 29#include <asm/page.h>
 30#include <asm/cache.h>
 31#include <asm/thread_info.h>
 32#include <asm-generic/vmlinux.lds.h>
 33
 34#ifdef __OR1K__
 35#define __OUTPUT_FORMAT        "elf32-or1k"
 36#else
 37#define __OUTPUT_FORMAT        "elf32-or32"
 38#endif
 39
 40OUTPUT_FORMAT(__OUTPUT_FORMAT, __OUTPUT_FORMAT, __OUTPUT_FORMAT)
 41jiffies = jiffies_64 + 4;
 42
 43SECTIONS
 44{
 45        /* Read-only sections, merged into text segment: */
 46        . = LOAD_BASE ;
 47
 48	_text = .;
 49
 50	/* _s_kernel_ro must be page aligned */
 51	. = ALIGN(PAGE_SIZE);
 52	_s_kernel_ro = .;
 53
 54        .text                   : AT(ADDR(.text) - LOAD_OFFSET)
 55	{
 56          _stext = .;
 57	  TEXT_TEXT
 58	  SCHED_TEXT
 59	  CPUIDLE_TEXT
 60	  LOCK_TEXT
 61	  KPROBES_TEXT
 62	  IRQENTRY_TEXT
 63	  SOFTIRQENTRY_TEXT
 64	  *(.fixup)
 65	  *(.text.__*)
 66	  _etext = .;
 67	}
 68	/* TODO: Check if fixup and text.__* are really necessary
 69	 * fixup is definitely necessary
 70	 */
 71
 72	_sdata = .;
 73
 74	/* Page alignment required for RO_DATA_SECTION */
 75	RO_DATA_SECTION(PAGE_SIZE)
 76	_e_kernel_ro = .;
 77
 78	/* Whatever comes after _e_kernel_ro had better be page-aligend, too */
 79
 80	/* 32 here is cacheline size... recheck this */
 81	RW_DATA_SECTION(32, PAGE_SIZE, PAGE_SIZE)
 82
 83        _edata  =  .;
 84
 85	EXCEPTION_TABLE(4)
 86	NOTES
 87
 88	/* Init code and data */
 89	. = ALIGN(PAGE_SIZE);
 90	__init_begin = .;
 91
 92	HEAD_TEXT_SECTION
 93
 94	/* Page aligned */
 95	INIT_TEXT_SECTION(PAGE_SIZE)
 96
 97	/* Align __setup_start on 16 byte boundary */
 98	INIT_DATA_SECTION(16)
 99
100	PERCPU_SECTION(L1_CACHE_BYTES)
101
102        __init_end = .;
103
104	. = ALIGN(PAGE_SIZE);
105	.initrd			: AT(ADDR(.initrd) - LOAD_OFFSET)
106	{
107		__initrd_start = .;
108		*(.initrd)
109		__initrd_end = .;
110		FILL (0);
111                . = ALIGN (PAGE_SIZE);
112	}
113
114        __vmlinux_end = .;            /* last address of the physical file */
115
116	BSS_SECTION(0, 0, 0x20)
117
118        _end = .;
119
120	/* Throw in the debugging sections */
121	STABS_DEBUG
122	DWARF_DEBUG
 
123
124        /* Sections to be discarded -- must be last */
125	DISCARDS
126}