Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
4 *
5 * Copyright (C) 2012 Atmel,
6 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
7 */
8
9/ {
10 memory@20000000 {
11 reg = <0x20000000 0x8000000>;
12 };
13
14 clocks {
15 slow_xtal {
16 clock-frequency = <32768>;
17 };
18
19 main_xtal {
20 clock-frequency = <12000000>;
21 };
22 };
23
24 ahb {
25 apb {
26 tcb0: timer@f8008000 {
27 timer@0 {
28 compatible = "atmel,tcb-timer";
29 reg = <0>;
30 };
31
32 timer@1 {
33 compatible = "atmel,tcb-timer";
34 reg = <1>;
35 };
36 };
37
38 pinctrl@fffff400 {
39 1wire_cm {
40 pinctrl_1wire_cm: 1wire_cm-0 {
41 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
42 };
43 };
44 };
45
46 rtc@fffffeb0 {
47 status = "okay";
48 };
49 };
50
51 ebi: ebi@10000000 {
52 pinctrl-0 = <&pinctrl_ebi_addr_nand
53 &pinctrl_ebi_data_0_7>;
54 pinctrl-names = "default";
55 status = "okay";
56
57 nand_controller: nand-controller {
58 status = "okay";
59 pinctrl-0 = <&pinctrl_nand_oe_we
60 &pinctrl_nand_cs
61 &pinctrl_nand_rb>;
62 pinctrl-names = "default";
63
64 nand@3 {
65 reg = <0x3 0x0 0x800000>;
66 rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
67 cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
68 nand-bus-width = <8>;
69 nand-ecc-mode = "hw";
70 nand-ecc-strength = <2>;
71 nand-ecc-step-size = <512>;
72 nand-on-flash-bbt;
73 label = "atmel_nand";
74
75 partitions {
76 compatible = "fixed-partitions";
77 #address-cells = <1>;
78 #size-cells = <1>;
79
80 at91bootstrap@0 {
81 label = "at91bootstrap";
82 reg = <0x0 0x40000>;
83 };
84
85 uboot@40000 {
86 label = "u-boot";
87 reg = <0x40000 0xc0000>;
88 };
89
90 ubootenvred@100000 {
91 label = "U-Boot Env Redundant";
92 reg = <0x100000 0x40000>;
93 };
94
95 ubootenv@140000 {
96 label = "U-Boot Env";
97 reg = <0x140000 0x40000>;
98 };
99
100 dtb@180000 {
101 label = "device tree";
102 reg = <0x180000 0x80000>;
103 };
104
105 kernel@200000 {
106 label = "kernel";
107 reg = <0x200000 0x600000>;
108 };
109
110 rootfs@800000 {
111 label = "rootfs";
112 reg = <0x800000 0x0f800000>;
113 };
114 };
115 };
116 };
117 };
118 };
119
120 leds {
121 compatible = "gpio-leds";
122
123 pb18 {
124 label = "pb18";
125 gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
126 linux,default-trigger = "heartbeat";
127 };
128
129 pd21 {
130 label = "pd21";
131 gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
132 };
133 };
134
135 1wire_cm {
136 compatible = "w1-gpio";
137 gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
138 linux,open-drain;
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_1wire_cm>;
141 status = "okay";
142 };
143
144};
1/*
2 * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
3 *
4 * Copyright (C) 2012 Atmel,
5 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */
9
10/ {
11 memory {
12 reg = <0x20000000 0x8000000>;
13 };
14
15 clocks {
16 slow_xtal {
17 clock-frequency = <32768>;
18 };
19
20 main_xtal {
21 clock-frequency = <12000000>;
22 };
23 };
24
25 ahb {
26 apb {
27 tcb0: timer@f8008000 {
28 timer@0 {
29 compatible = "atmel,tcb-timer";
30 reg = <0>;
31 };
32
33 timer@1 {
34 compatible = "atmel,tcb-timer";
35 reg = <1>;
36 };
37 };
38
39 pinctrl@fffff400 {
40 1wire_cm {
41 pinctrl_1wire_cm: 1wire_cm-0 {
42 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
43 };
44 };
45 };
46
47 rtc@fffffeb0 {
48 status = "okay";
49 };
50 };
51
52 ebi: ebi@10000000 {
53 pinctrl-0 = <&pinctrl_ebi_addr_nand
54 &pinctrl_ebi_data_0_7>;
55 pinctrl-names = "default";
56 status = "okay";
57
58 nand_controller: nand-controller {
59 status = "okay";
60 pinctrl-0 = <&pinctrl_nand_oe_we
61 &pinctrl_nand_cs
62 &pinctrl_nand_rb>;
63 pinctrl-names = "default";
64
65 nand@3 {
66 reg = <0x3 0x0 0x800000>;
67 rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
68 cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
69 nand-bus-width = <8>;
70 nand-ecc-mode = "hw";
71 nand-ecc-strength = <2>;
72 nand-ecc-step-size = <512>;
73 nand-on-flash-bbt;
74 label = "atmel_nand";
75
76 partitions {
77 compatible = "fixed-partitions";
78 #address-cells = <1>;
79 #size-cells = <1>;
80
81 at91bootstrap@0 {
82 label = "at91bootstrap";
83 reg = <0x0 0x40000>;
84 };
85
86 uboot@40000 {
87 label = "u-boot";
88 reg = <0x40000 0x80000>;
89 };
90
91 ubootenv@c0000 {
92 label = "U-Boot Env";
93 reg = <0xc0000 0x140000>;
94 };
95
96 kernel@200000 {
97 label = "kernel";
98 reg = <0x200000 0x600000>;
99 };
100
101 rootfs@800000 {
102 label = "rootfs";
103 reg = <0x800000 0x1f800000>;
104 };
105 };
106 };
107 };
108 };
109 };
110
111 leds {
112 compatible = "gpio-leds";
113
114 pb18 {
115 label = "pb18";
116 gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
117 linux,default-trigger = "heartbeat";
118 };
119
120 pd21 {
121 label = "pd21";
122 gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
123 };
124 };
125
126 1wire_cm {
127 compatible = "w1-gpio";
128 gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
129 linux,open-drain;
130 pinctrl-names = "default";
131 pinctrl-0 = <&pinctrl_1wire_cm>;
132 status = "okay";
133 };
134
135};