Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
4 * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
5 * Copyright (C) 2004 PathScale, Inc
6 * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
7 */
8
9#include <stdlib.h>
10#include <stdarg.h>
11#include <errno.h>
12#include <signal.h>
13#include <string.h>
14#include <strings.h>
15#include <as-layout.h>
16#include <kern_util.h>
17#include <os.h>
18#include <sysdep/mcontext.h>
19#include <um_malloc.h>
20#include <sys/ucontext.h>
21#include <timetravel.h>
22
23void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
24 [SIGTRAP] = relay_signal,
25 [SIGFPE] = relay_signal,
26 [SIGILL] = relay_signal,
27 [SIGWINCH] = winch,
28 [SIGBUS] = bus_handler,
29 [SIGSEGV] = segv_handler,
30 [SIGIO] = sigio_handler,
31};
32
33static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
34{
35 struct uml_pt_regs r;
36 int save_errno = errno;
37
38 r.is_user = 0;
39 if (sig == SIGSEGV) {
40 /* For segfaults, we want the data from the sigcontext. */
41 get_regs_from_mc(&r, mc);
42 GET_FAULTINFO_FROM_MC(r.faultinfo, mc);
43 }
44
45 /* enable signals if sig isn't IRQ signal */
46 if ((sig != SIGIO) && (sig != SIGWINCH))
47 unblock_signals_trace();
48
49 (*sig_info[sig])(sig, si, &r);
50
51 errno = save_errno;
52}
53
54/*
55 * These are the asynchronous signals. SIGPROF is excluded because we want to
56 * be able to profile all of UML, not just the non-critical sections. If
57 * profiling is not thread-safe, then that is not my problem. We can disable
58 * profiling when SMP is enabled in that case.
59 */
60#define SIGIO_BIT 0
61#define SIGIO_MASK (1 << SIGIO_BIT)
62
63#define SIGALRM_BIT 1
64#define SIGALRM_MASK (1 << SIGALRM_BIT)
65
66int signals_enabled;
67#ifdef UML_CONFIG_UML_TIME_TRAVEL_SUPPORT
68static int signals_blocked;
69#else
70#define signals_blocked 0
71#endif
72static unsigned int signals_pending;
73static unsigned int signals_active = 0;
74
75void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
76{
77 int enabled = signals_enabled;
78
79 if ((signals_blocked || !enabled) && (sig == SIGIO)) {
80 /*
81 * In TT_MODE_EXTERNAL, need to still call time-travel
82 * handlers unless signals are also blocked for the
83 * external time message processing. This will mark
84 * signals_pending by itself (only if necessary.)
85 */
86 if (!signals_blocked && time_travel_mode == TT_MODE_EXTERNAL)
87 sigio_run_timetravel_handlers();
88 else
89 signals_pending |= SIGIO_MASK;
90 return;
91 }
92
93 block_signals_trace();
94
95 sig_handler_common(sig, si, mc);
96
97 um_set_signals_trace(enabled);
98}
99
100static void timer_real_alarm_handler(mcontext_t *mc)
101{
102 struct uml_pt_regs regs;
103
104 if (mc != NULL)
105 get_regs_from_mc(®s, mc);
106 else
107 memset(®s, 0, sizeof(regs));
108 timer_handler(SIGALRM, NULL, ®s);
109}
110
111void timer_alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
112{
113 int enabled;
114
115 enabled = signals_enabled;
116 if (!signals_enabled) {
117 signals_pending |= SIGALRM_MASK;
118 return;
119 }
120
121 block_signals_trace();
122
123 signals_active |= SIGALRM_MASK;
124
125 timer_real_alarm_handler(mc);
126
127 signals_active &= ~SIGALRM_MASK;
128
129 um_set_signals_trace(enabled);
130}
131
132void deliver_alarm(void) {
133 timer_alarm_handler(SIGALRM, NULL, NULL);
134}
135
136void timer_set_signal_handler(void)
137{
138 set_handler(SIGALRM);
139}
140
141void set_sigstack(void *sig_stack, int size)
142{
143 stack_t stack = {
144 .ss_flags = 0,
145 .ss_sp = sig_stack,
146 .ss_size = size
147 };
148
149 if (sigaltstack(&stack, NULL) != 0)
150 panic("enabling signal stack failed, errno = %d\n", errno);
151}
152
153static void sigusr1_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
154{
155 uml_pm_wake();
156}
157
158void register_pm_wake_signal(void)
159{
160 set_handler(SIGUSR1);
161}
162
163static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = {
164 [SIGSEGV] = sig_handler,
165 [SIGBUS] = sig_handler,
166 [SIGILL] = sig_handler,
167 [SIGFPE] = sig_handler,
168 [SIGTRAP] = sig_handler,
169
170 [SIGIO] = sig_handler,
171 [SIGWINCH] = sig_handler,
172 [SIGALRM] = timer_alarm_handler,
173
174 [SIGUSR1] = sigusr1_handler,
175};
176
177static void hard_handler(int sig, siginfo_t *si, void *p)
178{
179 ucontext_t *uc = p;
180 mcontext_t *mc = &uc->uc_mcontext;
181 unsigned long pending = 1UL << sig;
182
183 do {
184 int nested, bail;
185
186 /*
187 * pending comes back with one bit set for each
188 * interrupt that arrived while setting up the stack,
189 * plus a bit for this interrupt, plus the zero bit is
190 * set if this is a nested interrupt.
191 * If bail is true, then we interrupted another
192 * handler setting up the stack. In this case, we
193 * have to return, and the upper handler will deal
194 * with this interrupt.
195 */
196 bail = to_irq_stack(&pending);
197 if (bail)
198 return;
199
200 nested = pending & 1;
201 pending &= ~1;
202
203 while ((sig = ffs(pending)) != 0){
204 sig--;
205 pending &= ~(1 << sig);
206 (*handlers[sig])(sig, (struct siginfo *)si, mc);
207 }
208
209 /*
210 * Again, pending comes back with a mask of signals
211 * that arrived while tearing down the stack. If this
212 * is non-zero, we just go back, set up the stack
213 * again, and handle the new interrupts.
214 */
215 if (!nested)
216 pending = from_irq_stack(nested);
217 } while (pending);
218}
219
220void set_handler(int sig)
221{
222 struct sigaction action;
223 int flags = SA_SIGINFO | SA_ONSTACK;
224 sigset_t sig_mask;
225
226 action.sa_sigaction = hard_handler;
227
228 /* block irq ones */
229 sigemptyset(&action.sa_mask);
230 sigaddset(&action.sa_mask, SIGIO);
231 sigaddset(&action.sa_mask, SIGWINCH);
232 sigaddset(&action.sa_mask, SIGALRM);
233
234 if (sig == SIGSEGV)
235 flags |= SA_NODEFER;
236
237 if (sigismember(&action.sa_mask, sig))
238 flags |= SA_RESTART; /* if it's an irq signal */
239
240 action.sa_flags = flags;
241 action.sa_restorer = NULL;
242 if (sigaction(sig, &action, NULL) < 0)
243 panic("sigaction failed - errno = %d\n", errno);
244
245 sigemptyset(&sig_mask);
246 sigaddset(&sig_mask, sig);
247 if (sigprocmask(SIG_UNBLOCK, &sig_mask, NULL) < 0)
248 panic("sigprocmask failed - errno = %d\n", errno);
249}
250
251void send_sigio_to_self(void)
252{
253 kill(os_getpid(), SIGIO);
254}
255
256int change_sig(int signal, int on)
257{
258 sigset_t sigset;
259
260 sigemptyset(&sigset);
261 sigaddset(&sigset, signal);
262 if (sigprocmask(on ? SIG_UNBLOCK : SIG_BLOCK, &sigset, NULL) < 0)
263 return -errno;
264
265 return 0;
266}
267
268void block_signals(void)
269{
270 signals_enabled = 0;
271 /*
272 * This must return with signals disabled, so this barrier
273 * ensures that writes are flushed out before the return.
274 * This might matter if gcc figures out how to inline this and
275 * decides to shuffle this code into the caller.
276 */
277 barrier();
278}
279
280void unblock_signals(void)
281{
282 int save_pending;
283
284 if (signals_enabled == 1)
285 return;
286
287 signals_enabled = 1;
288#ifdef UML_CONFIG_UML_TIME_TRAVEL_SUPPORT
289 deliver_time_travel_irqs();
290#endif
291
292 /*
293 * We loop because the IRQ handler returns with interrupts off. So,
294 * interrupts may have arrived and we need to re-enable them and
295 * recheck signals_pending.
296 */
297 while (1) {
298 /*
299 * Save and reset save_pending after enabling signals. This
300 * way, signals_pending won't be changed while we're reading it.
301 *
302 * Setting signals_enabled and reading signals_pending must
303 * happen in this order, so have the barrier here.
304 */
305 barrier();
306
307 save_pending = signals_pending;
308 if (save_pending == 0)
309 return;
310
311 signals_pending = 0;
312
313 /*
314 * We have pending interrupts, so disable signals, as the
315 * handlers expect them off when they are called. They will
316 * be enabled again above. We need to trace this, as we're
317 * expected to be enabling interrupts already, but any more
318 * tracing that happens inside the handlers we call for the
319 * pending signals will mess up the tracing state.
320 */
321 signals_enabled = 0;
322 um_trace_signals_off();
323
324 /*
325 * Deal with SIGIO first because the alarm handler might
326 * schedule, leaving the pending SIGIO stranded until we come
327 * back here.
328 *
329 * SIGIO's handler doesn't use siginfo or mcontext,
330 * so they can be NULL.
331 */
332 if (save_pending & SIGIO_MASK)
333 sig_handler_common(SIGIO, NULL, NULL);
334
335 /* Do not reenter the handler */
336
337 if ((save_pending & SIGALRM_MASK) && (!(signals_active & SIGALRM_MASK)))
338 timer_real_alarm_handler(NULL);
339
340 /* Rerun the loop only if there is still pending SIGIO and not in TIMER handler */
341
342 if (!(signals_pending & SIGIO_MASK) && (signals_active & SIGALRM_MASK))
343 return;
344
345 /* Re-enable signals and trace that we're doing so. */
346 um_trace_signals_on();
347 signals_enabled = 1;
348 }
349}
350
351int um_set_signals(int enable)
352{
353 int ret;
354 if (signals_enabled == enable)
355 return enable;
356
357 ret = signals_enabled;
358 if (enable)
359 unblock_signals();
360 else block_signals();
361
362 return ret;
363}
364
365int um_set_signals_trace(int enable)
366{
367 int ret;
368 if (signals_enabled == enable)
369 return enable;
370
371 ret = signals_enabled;
372 if (enable)
373 unblock_signals_trace();
374 else
375 block_signals_trace();
376
377 return ret;
378}
379
380#ifdef UML_CONFIG_UML_TIME_TRAVEL_SUPPORT
381void mark_sigio_pending(void)
382{
383 signals_pending |= SIGIO_MASK;
384}
385
386void block_signals_hard(void)
387{
388 if (signals_blocked)
389 return;
390 signals_blocked = 1;
391 barrier();
392}
393
394void unblock_signals_hard(void)
395{
396 if (!signals_blocked)
397 return;
398 /* Must be set to 0 before we check the pending bits etc. */
399 signals_blocked = 0;
400 barrier();
401
402 if (signals_pending && signals_enabled) {
403 /* this is a bit inefficient, but that's not really important */
404 block_signals();
405 unblock_signals();
406 } else if (signals_pending & SIGIO_MASK) {
407 /* we need to run time-travel handlers even if not enabled */
408 sigio_run_timetravel_handlers();
409 }
410}
411#endif
412
413int os_is_signal_stack(void)
414{
415 stack_t ss;
416 sigaltstack(NULL, &ss);
417
418 return ss.ss_flags & SS_ONSTACK;
419}
1/*
2 * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
3 * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
4 * Copyright (C) 2004 PathScale, Inc
5 * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
6 * Licensed under the GPL
7 */
8
9#include <stdlib.h>
10#include <stdarg.h>
11#include <errno.h>
12#include <signal.h>
13#include <strings.h>
14#include <as-layout.h>
15#include <kern_util.h>
16#include <os.h>
17#include <sysdep/mcontext.h>
18#include <um_malloc.h>
19#include <sys/ucontext.h>
20
21void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
22 [SIGTRAP] = relay_signal,
23 [SIGFPE] = relay_signal,
24 [SIGILL] = relay_signal,
25 [SIGWINCH] = winch,
26 [SIGBUS] = bus_handler,
27 [SIGSEGV] = segv_handler,
28 [SIGIO] = sigio_handler,
29 [SIGALRM] = timer_handler
30};
31
32static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
33{
34 struct uml_pt_regs *r;
35 int save_errno = errno;
36
37 r = uml_kmalloc(sizeof(struct uml_pt_regs), UM_GFP_ATOMIC);
38 if (!r)
39 panic("out of memory");
40
41 r->is_user = 0;
42 if (sig == SIGSEGV) {
43 /* For segfaults, we want the data from the sigcontext. */
44 get_regs_from_mc(r, mc);
45 GET_FAULTINFO_FROM_MC(r->faultinfo, mc);
46 }
47
48 /* enable signals if sig isn't IRQ signal */
49 if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGALRM))
50 unblock_signals();
51
52 (*sig_info[sig])(sig, si, r);
53
54 errno = save_errno;
55
56 free(r);
57}
58
59/*
60 * These are the asynchronous signals. SIGPROF is excluded because we want to
61 * be able to profile all of UML, not just the non-critical sections. If
62 * profiling is not thread-safe, then that is not my problem. We can disable
63 * profiling when SMP is enabled in that case.
64 */
65#define SIGIO_BIT 0
66#define SIGIO_MASK (1 << SIGIO_BIT)
67
68#define SIGALRM_BIT 1
69#define SIGALRM_MASK (1 << SIGALRM_BIT)
70
71static int signals_enabled;
72static unsigned int signals_pending;
73static unsigned int signals_active = 0;
74
75void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
76{
77 int enabled;
78
79 enabled = signals_enabled;
80 if (!enabled && (sig == SIGIO)) {
81 signals_pending |= SIGIO_MASK;
82 return;
83 }
84
85 block_signals();
86
87 sig_handler_common(sig, si, mc);
88
89 set_signals(enabled);
90}
91
92static void timer_real_alarm_handler(mcontext_t *mc)
93{
94 struct uml_pt_regs *regs;
95
96 regs = uml_kmalloc(sizeof(struct uml_pt_regs), UM_GFP_ATOMIC);
97 if (!regs)
98 panic("out of memory");
99
100 if (mc != NULL)
101 get_regs_from_mc(regs, mc);
102 timer_handler(SIGALRM, NULL, regs);
103
104 free(regs);
105}
106
107void timer_alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
108{
109 int enabled;
110
111 enabled = signals_enabled;
112 if (!signals_enabled) {
113 signals_pending |= SIGALRM_MASK;
114 return;
115 }
116
117 block_signals();
118
119 signals_active |= SIGALRM_MASK;
120
121 timer_real_alarm_handler(mc);
122
123 signals_active &= ~SIGALRM_MASK;
124
125 set_signals(enabled);
126}
127
128void deliver_alarm(void) {
129 timer_alarm_handler(SIGALRM, NULL, NULL);
130}
131
132void timer_set_signal_handler(void)
133{
134 set_handler(SIGALRM);
135}
136
137void set_sigstack(void *sig_stack, int size)
138{
139 stack_t stack = {
140 .ss_flags = 0,
141 .ss_sp = sig_stack,
142 .ss_size = size - sizeof(void *)
143 };
144
145 if (sigaltstack(&stack, NULL) != 0)
146 panic("enabling signal stack failed, errno = %d\n", errno);
147}
148
149static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = {
150 [SIGSEGV] = sig_handler,
151 [SIGBUS] = sig_handler,
152 [SIGILL] = sig_handler,
153 [SIGFPE] = sig_handler,
154 [SIGTRAP] = sig_handler,
155
156 [SIGIO] = sig_handler,
157 [SIGWINCH] = sig_handler,
158 [SIGALRM] = timer_alarm_handler
159};
160
161static void hard_handler(int sig, siginfo_t *si, void *p)
162{
163 ucontext_t *uc = p;
164 mcontext_t *mc = &uc->uc_mcontext;
165 unsigned long pending = 1UL << sig;
166
167 do {
168 int nested, bail;
169
170 /*
171 * pending comes back with one bit set for each
172 * interrupt that arrived while setting up the stack,
173 * plus a bit for this interrupt, plus the zero bit is
174 * set if this is a nested interrupt.
175 * If bail is true, then we interrupted another
176 * handler setting up the stack. In this case, we
177 * have to return, and the upper handler will deal
178 * with this interrupt.
179 */
180 bail = to_irq_stack(&pending);
181 if (bail)
182 return;
183
184 nested = pending & 1;
185 pending &= ~1;
186
187 while ((sig = ffs(pending)) != 0){
188 sig--;
189 pending &= ~(1 << sig);
190 (*handlers[sig])(sig, (struct siginfo *)si, mc);
191 }
192
193 /*
194 * Again, pending comes back with a mask of signals
195 * that arrived while tearing down the stack. If this
196 * is non-zero, we just go back, set up the stack
197 * again, and handle the new interrupts.
198 */
199 if (!nested)
200 pending = from_irq_stack(nested);
201 } while (pending);
202}
203
204void set_handler(int sig)
205{
206 struct sigaction action;
207 int flags = SA_SIGINFO | SA_ONSTACK;
208 sigset_t sig_mask;
209
210 action.sa_sigaction = hard_handler;
211
212 /* block irq ones */
213 sigemptyset(&action.sa_mask);
214 sigaddset(&action.sa_mask, SIGIO);
215 sigaddset(&action.sa_mask, SIGWINCH);
216 sigaddset(&action.sa_mask, SIGALRM);
217
218 if (sig == SIGSEGV)
219 flags |= SA_NODEFER;
220
221 if (sigismember(&action.sa_mask, sig))
222 flags |= SA_RESTART; /* if it's an irq signal */
223
224 action.sa_flags = flags;
225 action.sa_restorer = NULL;
226 if (sigaction(sig, &action, NULL) < 0)
227 panic("sigaction failed - errno = %d\n", errno);
228
229 sigemptyset(&sig_mask);
230 sigaddset(&sig_mask, sig);
231 if (sigprocmask(SIG_UNBLOCK, &sig_mask, NULL) < 0)
232 panic("sigprocmask failed - errno = %d\n", errno);
233}
234
235int change_sig(int signal, int on)
236{
237 sigset_t sigset;
238
239 sigemptyset(&sigset);
240 sigaddset(&sigset, signal);
241 if (sigprocmask(on ? SIG_UNBLOCK : SIG_BLOCK, &sigset, NULL) < 0)
242 return -errno;
243
244 return 0;
245}
246
247void block_signals(void)
248{
249 signals_enabled = 0;
250 /*
251 * This must return with signals disabled, so this barrier
252 * ensures that writes are flushed out before the return.
253 * This might matter if gcc figures out how to inline this and
254 * decides to shuffle this code into the caller.
255 */
256 barrier();
257}
258
259void unblock_signals(void)
260{
261 int save_pending;
262
263 if (signals_enabled == 1)
264 return;
265
266 /*
267 * We loop because the IRQ handler returns with interrupts off. So,
268 * interrupts may have arrived and we need to re-enable them and
269 * recheck signals_pending.
270 */
271 while (1) {
272 /*
273 * Save and reset save_pending after enabling signals. This
274 * way, signals_pending won't be changed while we're reading it.
275 */
276 signals_enabled = 1;
277
278 /*
279 * Setting signals_enabled and reading signals_pending must
280 * happen in this order.
281 */
282 barrier();
283
284 save_pending = signals_pending;
285 if (save_pending == 0)
286 return;
287
288 signals_pending = 0;
289
290 /*
291 * We have pending interrupts, so disable signals, as the
292 * handlers expect them off when they are called. They will
293 * be enabled again above.
294 */
295
296 signals_enabled = 0;
297
298 /*
299 * Deal with SIGIO first because the alarm handler might
300 * schedule, leaving the pending SIGIO stranded until we come
301 * back here.
302 *
303 * SIGIO's handler doesn't use siginfo or mcontext,
304 * so they can be NULL.
305 */
306 if (save_pending & SIGIO_MASK)
307 sig_handler_common(SIGIO, NULL, NULL);
308
309 /* Do not reenter the handler */
310
311 if ((save_pending & SIGALRM_MASK) && (!(signals_active & SIGALRM_MASK)))
312 timer_real_alarm_handler(NULL);
313
314 /* Rerun the loop only if there is still pending SIGIO and not in TIMER handler */
315
316 if (!(signals_pending & SIGIO_MASK) && (signals_active & SIGALRM_MASK))
317 return;
318
319 }
320}
321
322int get_signals(void)
323{
324 return signals_enabled;
325}
326
327int set_signals(int enable)
328{
329 int ret;
330 if (signals_enabled == enable)
331 return enable;
332
333 ret = signals_enabled;
334 if (enable)
335 unblock_signals();
336 else block_signals();
337
338 return ret;
339}
340
341int os_is_signal_stack(void)
342{
343 stack_t ss;
344 sigaltstack(NULL, &ss);
345
346 return ss.ss_flags & SS_ONSTACK;
347}