Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * OMAP2/3 System Control Module register access
4 *
5 * Copyright (C) 2007, 2012 Texas Instruments, Inc.
6 * Copyright (C) 2007 Nokia Corporation
7 *
8 * Written by Paul Walmsley
9 */
10#undef DEBUG
11
12#include <linux/kernel.h>
13#include <linux/io.h>
14#include <linux/of_address.h>
15#include <linux/regmap.h>
16#include <linux/mfd/syscon.h>
17#include <linux/cpu_pm.h>
18
19#include "soc.h"
20#include "iomap.h"
21#include "common.h"
22#include "cm-regbits-34xx.h"
23#include "prm-regbits-34xx.h"
24#include "prm3xxx.h"
25#include "cm3xxx.h"
26#include "sdrc.h"
27#include "pm.h"
28#include "control.h"
29#include "clock.h"
30
31/* Used by omap3_ctrl_save_padconf() */
32#define START_PADCONF_SAVE 0x2
33#define PADCONF_SAVE_DONE 0x1
34
35static void __iomem *omap2_ctrl_base;
36static s16 omap2_ctrl_offset;
37
38#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
39struct omap3_scratchpad {
40 u32 boot_config_ptr;
41 u32 public_restore_ptr;
42 u32 secure_ram_restore_ptr;
43 u32 sdrc_module_semaphore;
44 u32 prcm_block_offset;
45 u32 sdrc_block_offset;
46};
47
48struct omap3_scratchpad_prcm_block {
49 u32 prm_contents[2];
50 u32 cm_contents[11];
51 u32 prcm_block_size;
52};
53
54struct omap3_scratchpad_sdrc_block {
55 u16 sysconfig;
56 u16 cs_cfg;
57 u16 sharing;
58 u16 err_type;
59 u32 dll_a_ctrl;
60 u32 dll_b_ctrl;
61 u32 power;
62 u32 cs_0;
63 u32 mcfg_0;
64 u16 mr_0;
65 u16 emr_1_0;
66 u16 emr_2_0;
67 u16 emr_3_0;
68 u32 actim_ctrla_0;
69 u32 actim_ctrlb_0;
70 u32 rfr_ctrl_0;
71 u32 cs_1;
72 u32 mcfg_1;
73 u16 mr_1;
74 u16 emr_1_1;
75 u16 emr_2_1;
76 u16 emr_3_1;
77 u32 actim_ctrla_1;
78 u32 actim_ctrlb_1;
79 u32 rfr_ctrl_1;
80 u16 dcdl_1_ctrl;
81 u16 dcdl_2_ctrl;
82 u32 flags;
83 u32 block_size;
84};
85
86void *omap3_secure_ram_storage;
87
88/*
89 * This is used to store ARM registers in SDRAM before attempting
90 * an MPU OFF. The save and restore happens from the SRAM sleep code.
91 * The address is stored in scratchpad, so that it can be used
92 * during the restore path.
93 */
94u32 omap3_arm_context[128];
95
96struct omap3_control_regs {
97 u32 sysconfig;
98 u32 devconf0;
99 u32 mem_dftrw0;
100 u32 mem_dftrw1;
101 u32 msuspendmux_0;
102 u32 msuspendmux_1;
103 u32 msuspendmux_2;
104 u32 msuspendmux_3;
105 u32 msuspendmux_4;
106 u32 msuspendmux_5;
107 u32 sec_ctrl;
108 u32 devconf1;
109 u32 csirxfe;
110 u32 iva2_bootaddr;
111 u32 iva2_bootmod;
112 u32 wkup_ctrl;
113 u32 debobs_0;
114 u32 debobs_1;
115 u32 debobs_2;
116 u32 debobs_3;
117 u32 debobs_4;
118 u32 debobs_5;
119 u32 debobs_6;
120 u32 debobs_7;
121 u32 debobs_8;
122 u32 prog_io0;
123 u32 prog_io1;
124 u32 dss_dpll_spreading;
125 u32 core_dpll_spreading;
126 u32 per_dpll_spreading;
127 u32 usbhost_dpll_spreading;
128 u32 pbias_lite;
129 u32 temp_sensor;
130 u32 sramldo4;
131 u32 sramldo5;
132 u32 csi;
133 u32 padconf_sys_nirq;
134};
135
136static struct omap3_control_regs control_context;
137#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
138
139u8 omap_ctrl_readb(u16 offset)
140{
141 u32 val;
142 u8 byte_offset = offset & 0x3;
143
144 val = omap_ctrl_readl(offset);
145
146 return (val >> (byte_offset * 8)) & 0xff;
147}
148
149u16 omap_ctrl_readw(u16 offset)
150{
151 u32 val;
152 u16 byte_offset = offset & 0x2;
153
154 val = omap_ctrl_readl(offset);
155
156 return (val >> (byte_offset * 8)) & 0xffff;
157}
158
159u32 omap_ctrl_readl(u16 offset)
160{
161 offset &= 0xfffc;
162
163 return readl_relaxed(omap2_ctrl_base + offset);
164}
165
166void omap_ctrl_writeb(u8 val, u16 offset)
167{
168 u32 tmp;
169 u8 byte_offset = offset & 0x3;
170
171 tmp = omap_ctrl_readl(offset);
172
173 tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
174 tmp |= val << (byte_offset * 8);
175
176 omap_ctrl_writel(tmp, offset);
177}
178
179void omap_ctrl_writew(u16 val, u16 offset)
180{
181 u32 tmp;
182 u8 byte_offset = offset & 0x2;
183
184 tmp = omap_ctrl_readl(offset);
185
186 tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
187 tmp |= val << (byte_offset * 8);
188
189 omap_ctrl_writel(tmp, offset);
190}
191
192void omap_ctrl_writel(u32 val, u16 offset)
193{
194 offset &= 0xfffc;
195 writel_relaxed(val, omap2_ctrl_base + offset);
196}
197
198#ifdef CONFIG_ARCH_OMAP3
199
200/**
201 * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
202 * @bootmode: 8-bit value to pass to some boot code
203 *
204 * Set the bootmode in the scratchpad RAM. This is used after the
205 * system restarts. Not sure what actually uses this - it may be the
206 * bootloader, rather than the boot ROM - contrary to the preserved
207 * comment below. No return value.
208 */
209void omap3_ctrl_write_boot_mode(u8 bootmode)
210{
211 u32 l;
212
213 l = ('B' << 24) | ('M' << 16) | bootmode;
214
215 /*
216 * Reserve the first word in scratchpad for communicating
217 * with the boot ROM. A pointer to a data structure
218 * describing the boot process can be stored there,
219 * cf. OMAP34xx TRM, Initialization / Software Booting
220 * Configuration.
221 *
222 * XXX This should use some omap_ctrl_writel()-type function
223 */
224 writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
225}
226
227#endif
228
229/**
230 * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
231 * @bootaddr: physical address of the boot loader
232 *
233 * Set boot address for the boot loader of a supported processor
234 * when a power ON sequence occurs.
235 */
236void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
237{
238 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
239 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
240 cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
241 soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
242 0;
243
244 if (!offset) {
245 pr_err("%s: unsupported omap type\n", __func__);
246 return;
247 }
248
249 omap_ctrl_writel(bootaddr, offset);
250}
251
252/**
253 * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
254 * @bootmode: 8-bit value to pass to some boot code
255 *
256 * Sets boot mode for the boot loader of a supported processor
257 * when a power ON sequence occurs.
258 */
259void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
260{
261 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
262 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
263 0;
264
265 if (!offset) {
266 pr_err("%s: unsupported omap type\n", __func__);
267 return;
268 }
269
270 omap_ctrl_writel(bootmode, offset);
271}
272
273#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
274/*
275 * Clears the scratchpad contents in case of cold boot-
276 * called during bootup
277 */
278void omap3_clear_scratchpad_contents(void)
279{
280 u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
281 void __iomem *v_addr;
282 u32 offset = 0;
283
284 v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
285 if (omap3xxx_prm_clear_global_cold_reset()) {
286 for ( ; offset <= max_offset; offset += 0x4)
287 writel_relaxed(0x0, (v_addr + offset));
288 }
289}
290
291/* Populate the scratchpad structure with restore structure */
292void omap3_save_scratchpad_contents(void)
293{
294 void __iomem *scratchpad_address;
295 u32 arm_context_addr;
296 struct omap3_scratchpad scratchpad_contents;
297 struct omap3_scratchpad_prcm_block prcm_block_contents;
298 struct omap3_scratchpad_sdrc_block sdrc_block_contents;
299
300 /*
301 * Populate the Scratchpad contents
302 *
303 * The "get_*restore_pointer" functions are used to provide a
304 * physical restore address where the ROM code jumps while waking
305 * up from MPU OFF/OSWR state.
306 * The restore pointer is stored into the scratchpad.
307 */
308 scratchpad_contents.boot_config_ptr = 0x0;
309 if (cpu_is_omap3630())
310 scratchpad_contents.public_restore_ptr =
311 __pa_symbol(omap3_restore_3630);
312 else if (omap_rev() != OMAP3430_REV_ES3_0 &&
313 omap_rev() != OMAP3430_REV_ES3_1 &&
314 omap_rev() != OMAP3430_REV_ES3_1_2)
315 scratchpad_contents.public_restore_ptr =
316 __pa_symbol(omap3_restore);
317 else
318 scratchpad_contents.public_restore_ptr =
319 __pa_symbol(omap3_restore_es3);
320
321 if (omap_type() == OMAP2_DEVICE_TYPE_GP)
322 scratchpad_contents.secure_ram_restore_ptr = 0x0;
323 else
324 scratchpad_contents.secure_ram_restore_ptr =
325 (u32) __pa(omap3_secure_ram_storage);
326 scratchpad_contents.sdrc_module_semaphore = 0x0;
327 scratchpad_contents.prcm_block_offset = 0x2C;
328 scratchpad_contents.sdrc_block_offset = 0x64;
329
330 /* Populate the PRCM block contents */
331 omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
332 omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
333
334 prcm_block_contents.prcm_block_size = 0x0;
335
336 /* Populate the SDRC block contents */
337 sdrc_block_contents.sysconfig =
338 (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
339 sdrc_block_contents.cs_cfg =
340 (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
341 sdrc_block_contents.sharing =
342 (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
343 sdrc_block_contents.err_type =
344 (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
345 sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
346 sdrc_block_contents.dll_b_ctrl = 0x0;
347 /*
348 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
349 * be programed to issue automatic self refresh on timeout
350 * of AUTO_CNT = 1 prior to any transition to OFF mode.
351 */
352 if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
353 && (omap_rev() >= OMAP3430_REV_ES3_0))
354 sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
355 ~(SDRC_POWER_AUTOCOUNT_MASK|
356 SDRC_POWER_CLKCTRL_MASK)) |
357 (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
358 SDRC_SELF_REFRESH_ON_AUTOCOUNT;
359 else
360 sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
361
362 sdrc_block_contents.cs_0 = 0x0;
363 sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
364 sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
365 sdrc_block_contents.emr_1_0 = 0x0;
366 sdrc_block_contents.emr_2_0 = 0x0;
367 sdrc_block_contents.emr_3_0 = 0x0;
368 sdrc_block_contents.actim_ctrla_0 =
369 sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
370 sdrc_block_contents.actim_ctrlb_0 =
371 sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
372 sdrc_block_contents.rfr_ctrl_0 =
373 sdrc_read_reg(SDRC_RFR_CTRL_0);
374 sdrc_block_contents.cs_1 = 0x0;
375 sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
376 sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
377 sdrc_block_contents.emr_1_1 = 0x0;
378 sdrc_block_contents.emr_2_1 = 0x0;
379 sdrc_block_contents.emr_3_1 = 0x0;
380 sdrc_block_contents.actim_ctrla_1 =
381 sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
382 sdrc_block_contents.actim_ctrlb_1 =
383 sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
384 sdrc_block_contents.rfr_ctrl_1 =
385 sdrc_read_reg(SDRC_RFR_CTRL_1);
386 sdrc_block_contents.dcdl_1_ctrl = 0x0;
387 sdrc_block_contents.dcdl_2_ctrl = 0x0;
388 sdrc_block_contents.flags = 0x0;
389 sdrc_block_contents.block_size = 0x0;
390
391 arm_context_addr = __pa_symbol(omap3_arm_context);
392
393 /* Copy all the contents to the scratchpad location */
394 scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
395 memcpy_toio(scratchpad_address, &scratchpad_contents,
396 sizeof(scratchpad_contents));
397 /* Scratchpad contents being 32 bits, a divide by 4 done here */
398 memcpy_toio(scratchpad_address +
399 scratchpad_contents.prcm_block_offset,
400 &prcm_block_contents, sizeof(prcm_block_contents));
401 memcpy_toio(scratchpad_address +
402 scratchpad_contents.sdrc_block_offset,
403 &sdrc_block_contents, sizeof(sdrc_block_contents));
404 /*
405 * Copies the address of the location in SDRAM where ARM
406 * registers get saved during a MPU OFF transition.
407 */
408 memcpy_toio(scratchpad_address +
409 scratchpad_contents.sdrc_block_offset +
410 sizeof(sdrc_block_contents), &arm_context_addr, 4);
411}
412
413void omap3_control_save_context(void)
414{
415 control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
416 control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
417 control_context.mem_dftrw0 =
418 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
419 control_context.mem_dftrw1 =
420 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
421 control_context.msuspendmux_0 =
422 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
423 control_context.msuspendmux_1 =
424 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
425 control_context.msuspendmux_2 =
426 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
427 control_context.msuspendmux_3 =
428 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
429 control_context.msuspendmux_4 =
430 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
431 control_context.msuspendmux_5 =
432 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
433 control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
434 control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
435 control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
436 control_context.iva2_bootaddr =
437 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
438 control_context.iva2_bootmod =
439 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
440 control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
441 control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
442 control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
443 control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
444 control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
445 control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
446 control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
447 control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
448 control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
449 control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
450 control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
451 control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
452 control_context.dss_dpll_spreading =
453 omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
454 control_context.core_dpll_spreading =
455 omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
456 control_context.per_dpll_spreading =
457 omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
458 control_context.usbhost_dpll_spreading =
459 omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
460 control_context.pbias_lite =
461 omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
462 control_context.temp_sensor =
463 omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
464 control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
465 control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
466 control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
467 control_context.padconf_sys_nirq =
468 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
469}
470
471void omap3_control_restore_context(void)
472{
473 omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
474 omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
475 omap_ctrl_writel(control_context.mem_dftrw0,
476 OMAP343X_CONTROL_MEM_DFTRW0);
477 omap_ctrl_writel(control_context.mem_dftrw1,
478 OMAP343X_CONTROL_MEM_DFTRW1);
479 omap_ctrl_writel(control_context.msuspendmux_0,
480 OMAP2_CONTROL_MSUSPENDMUX_0);
481 omap_ctrl_writel(control_context.msuspendmux_1,
482 OMAP2_CONTROL_MSUSPENDMUX_1);
483 omap_ctrl_writel(control_context.msuspendmux_2,
484 OMAP2_CONTROL_MSUSPENDMUX_2);
485 omap_ctrl_writel(control_context.msuspendmux_3,
486 OMAP2_CONTROL_MSUSPENDMUX_3);
487 omap_ctrl_writel(control_context.msuspendmux_4,
488 OMAP2_CONTROL_MSUSPENDMUX_4);
489 omap_ctrl_writel(control_context.msuspendmux_5,
490 OMAP2_CONTROL_MSUSPENDMUX_5);
491 omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
492 omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
493 omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
494 omap_ctrl_writel(control_context.iva2_bootaddr,
495 OMAP343X_CONTROL_IVA2_BOOTADDR);
496 omap_ctrl_writel(control_context.iva2_bootmod,
497 OMAP343X_CONTROL_IVA2_BOOTMOD);
498 omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
499 omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
500 omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
501 omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
502 omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
503 omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
504 omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
505 omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
506 omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
507 omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
508 omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
509 omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
510 omap_ctrl_writel(control_context.dss_dpll_spreading,
511 OMAP343X_CONTROL_DSS_DPLL_SPREADING);
512 omap_ctrl_writel(control_context.core_dpll_spreading,
513 OMAP343X_CONTROL_CORE_DPLL_SPREADING);
514 omap_ctrl_writel(control_context.per_dpll_spreading,
515 OMAP343X_CONTROL_PER_DPLL_SPREADING);
516 omap_ctrl_writel(control_context.usbhost_dpll_spreading,
517 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
518 omap_ctrl_writel(control_context.pbias_lite,
519 OMAP343X_CONTROL_PBIAS_LITE);
520 omap_ctrl_writel(control_context.temp_sensor,
521 OMAP343X_CONTROL_TEMP_SENSOR);
522 omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
523 omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
524 omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
525 omap_ctrl_writel(control_context.padconf_sys_nirq,
526 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
527}
528
529void omap3630_ctrl_disable_rta(void)
530{
531 if (!cpu_is_omap3630())
532 return;
533 omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
534}
535
536/**
537 * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
538 *
539 * Tell the SCM to start saving the padconf registers, then wait for
540 * the process to complete. Returns 0 unconditionally, although it
541 * should also eventually be able to return -ETIMEDOUT, if the save
542 * does not complete.
543 *
544 * XXX This function is missing a timeout. What should it be?
545 */
546int omap3_ctrl_save_padconf(void)
547{
548 u32 cpo;
549
550 /* Save the padconf registers */
551 cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
552 cpo |= START_PADCONF_SAVE;
553 omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
554
555 /* wait for the save to complete */
556 while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
557 & PADCONF_SAVE_DONE))
558 udelay(1);
559
560 return 0;
561}
562
563/**
564 * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
565 *
566 * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
567 * force disable IVA2 so that it does not prevent any low-power states.
568 */
569static void __init omap3_ctrl_set_iva_bootmode_idle(void)
570{
571 omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
572 OMAP343X_CONTROL_IVA2_BOOTMOD);
573}
574
575/**
576 * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
577 *
578 * Sets up the pads controlling the stacked modem in such way that the
579 * device can enter idle.
580 */
581static void __init omap3_ctrl_setup_d2d_padconf(void)
582{
583 u16 mask, padconf;
584
585 /*
586 * In a stand alone OMAP3430 where there is not a stacked
587 * modem for the D2D Idle Ack and D2D MStandby must be pulled
588 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
589 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
590 */
591 mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
592 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
593 padconf |= mask;
594 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
595
596 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
597 padconf |= mask;
598 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
599}
600
601/**
602 * omap3_ctrl_init - does static initializations for control module
603 *
604 * Initializes system control module. This sets up the sysconfig autoidle,
605 * and sets up modem and iva2 so that they can be idled properly.
606 */
607void __init omap3_ctrl_init(void)
608{
609 omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
610
611 omap3_ctrl_set_iva_bootmode_idle();
612
613 omap3_ctrl_setup_d2d_padconf();
614}
615#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
616
617static unsigned long am43xx_control_reg_offsets[] = {
618 AM33XX_CONTROL_SYSCONFIG_OFFSET,
619 AM33XX_CONTROL_STATUS_OFFSET,
620 AM43XX_CONTROL_MPU_L2_CTRL_OFFSET,
621 AM33XX_CONTROL_CORE_SLDO_CTRL_OFFSET,
622 AM33XX_CONTROL_MPU_SLDO_CTRL_OFFSET,
623 AM33XX_CONTROL_CLK32KDIVRATIO_CTRL_OFFSET,
624 AM33XX_CONTROL_BANDGAP_CTRL_OFFSET,
625 AM33XX_CONTROL_BANDGAP_TRIM_OFFSET,
626 AM33XX_CONTROL_PLL_CLKINPULOW_CTRL_OFFSET,
627 AM33XX_CONTROL_MOSC_CTRL_OFFSET,
628 AM33XX_CONTROL_DEEPSLEEP_CTRL_OFFSET,
629 AM43XX_CONTROL_DISPLAY_PLL_SEL_OFFSET,
630 AM33XX_CONTROL_INIT_PRIORITY_0_OFFSET,
631 AM33XX_CONTROL_INIT_PRIORITY_1_OFFSET,
632 AM33XX_CONTROL_TPTC_CFG_OFFSET,
633 AM33XX_CONTROL_USB_CTRL0_OFFSET,
634 AM33XX_CONTROL_USB_CTRL1_OFFSET,
635 AM43XX_CONTROL_USB_CTRL2_OFFSET,
636 AM43XX_CONTROL_GMII_SEL_OFFSET,
637 AM43XX_CONTROL_MPUSS_CTRL_OFFSET,
638 AM43XX_CONTROL_TIMER_CASCADE_CTRL_OFFSET,
639 AM43XX_CONTROL_PWMSS_CTRL_OFFSET,
640 AM33XX_CONTROL_MREQPRIO_0_OFFSET,
641 AM33XX_CONTROL_MREQPRIO_1_OFFSET,
642 AM33XX_CONTROL_HW_EVENT_SEL_GRP1_OFFSET,
643 AM33XX_CONTROL_HW_EVENT_SEL_GRP2_OFFSET,
644 AM33XX_CONTROL_HW_EVENT_SEL_GRP3_OFFSET,
645 AM33XX_CONTROL_HW_EVENT_SEL_GRP4_OFFSET,
646 AM33XX_CONTROL_SMRT_CTRL_OFFSET,
647 AM33XX_CONTROL_MPUSS_HW_DEBUG_SEL_OFFSET,
648 AM43XX_CONTROL_CQDETECT_STS_OFFSET,
649 AM43XX_CONTROL_CQDETECT_STS2_OFFSET,
650 AM43XX_CONTROL_VTP_CTRL_OFFSET,
651 AM33XX_CONTROL_VREF_CTRL_OFFSET,
652 AM33XX_CONTROL_TPCC_EVT_MUX_0_3_OFFSET,
653 AM33XX_CONTROL_TPCC_EVT_MUX_4_7_OFFSET,
654 AM33XX_CONTROL_TPCC_EVT_MUX_8_11_OFFSET,
655 AM33XX_CONTROL_TPCC_EVT_MUX_12_15_OFFSET,
656 AM33XX_CONTROL_TPCC_EVT_MUX_16_19_OFFSET,
657 AM33XX_CONTROL_TPCC_EVT_MUX_20_23_OFFSET,
658 AM33XX_CONTROL_TPCC_EVT_MUX_24_27_OFFSET,
659 AM33XX_CONTROL_TPCC_EVT_MUX_28_31_OFFSET,
660 AM33XX_CONTROL_TPCC_EVT_MUX_32_35_OFFSET,
661 AM33XX_CONTROL_TPCC_EVT_MUX_36_39_OFFSET,
662 AM33XX_CONTROL_TPCC_EVT_MUX_40_43_OFFSET,
663 AM33XX_CONTROL_TPCC_EVT_MUX_44_47_OFFSET,
664 AM33XX_CONTROL_TPCC_EVT_MUX_48_51_OFFSET,
665 AM33XX_CONTROL_TPCC_EVT_MUX_52_55_OFFSET,
666 AM33XX_CONTROL_TPCC_EVT_MUX_56_59_OFFSET,
667 AM33XX_CONTROL_TPCC_EVT_MUX_60_63_OFFSET,
668 AM33XX_CONTROL_TIMER_EVT_CAPT_OFFSET,
669 AM33XX_CONTROL_ECAP_EVT_CAPT_OFFSET,
670 AM33XX_CONTROL_ADC_EVT_CAPT_OFFSET,
671 AM43XX_CONTROL_ADC1_EVT_CAPT_OFFSET,
672 AM33XX_CONTROL_RESET_ISO_OFFSET,
673};
674
675static u32 am33xx_control_vals[ARRAY_SIZE(am43xx_control_reg_offsets)];
676
677/**
678 * am43xx_control_save_context - Save the wakeup domain registers
679 *
680 * Save the wkup domain registers
681 */
682static void am43xx_control_save_context(void)
683{
684 int i;
685
686 for (i = 0; i < ARRAY_SIZE(am43xx_control_reg_offsets); i++)
687 am33xx_control_vals[i] =
688 omap_ctrl_readl(am43xx_control_reg_offsets[i]);
689}
690
691/**
692 * am43xx_control_restore_context - Restore the wakeup domain registers
693 *
694 * Restore the wkup domain registers
695 */
696static void am43xx_control_restore_context(void)
697{
698 int i;
699
700 for (i = 0; i < ARRAY_SIZE(am43xx_control_reg_offsets); i++)
701 omap_ctrl_writel(am33xx_control_vals[i],
702 am43xx_control_reg_offsets[i]);
703}
704
705static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v)
706{
707 switch (cmd) {
708 case CPU_CLUSTER_PM_ENTER:
709 if (enable_off_mode)
710 am43xx_control_save_context();
711 break;
712 case CPU_CLUSTER_PM_EXIT:
713 if (enable_off_mode)
714 am43xx_control_restore_context();
715 break;
716 }
717
718 return NOTIFY_OK;
719}
720
721struct control_init_data {
722 int index;
723 void __iomem *mem;
724 s16 offset;
725};
726
727static struct control_init_data ctrl_data = {
728 .index = TI_CLKM_CTRL,
729};
730
731static const struct control_init_data omap2_ctrl_data = {
732 .index = TI_CLKM_CTRL,
733 .offset = -OMAP2_CONTROL_GENERAL,
734};
735
736static const struct control_init_data ctrl_aux_data = {
737 .index = TI_CLKM_CTRL_AUX,
738};
739
740static const struct of_device_id omap_scrm_dt_match_table[] = {
741 { .compatible = "ti,am3-scm", .data = &ctrl_data },
742 { .compatible = "ti,am4-scm", .data = &ctrl_data },
743 { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
744 { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
745 { .compatible = "ti,dm814-scm", .data = &ctrl_data },
746 { .compatible = "ti,dm816-scrm", .data = &ctrl_data },
747 { .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
748 { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
749 { .compatible = "ti,omap5-scm-wkup-pad-conf", .data = &ctrl_aux_data },
750 { .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
751 { }
752};
753
754/**
755 * omap2_control_base_init - initialize iomappings for the control driver
756 *
757 * Detects and initializes the iomappings for the control driver, based
758 * on the DT data. Returns 0 in success, negative error value
759 * otherwise.
760 */
761int __init omap2_control_base_init(void)
762{
763 struct device_node *np;
764 const struct of_device_id *match;
765 struct control_init_data *data;
766 void __iomem *mem;
767
768 for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
769 data = (struct control_init_data *)match->data;
770
771 mem = of_iomap(np, 0);
772 if (!mem) {
773 of_node_put(np);
774 return -ENOMEM;
775 }
776
777 if (data->index == TI_CLKM_CTRL) {
778 omap2_ctrl_base = mem;
779 omap2_ctrl_offset = data->offset;
780 }
781
782 data->mem = mem;
783 }
784
785 return 0;
786}
787
788/**
789 * omap_control_init - low level init for the control driver
790 *
791 * Initializes the low level clock infrastructure for control driver.
792 * Returns 0 in success, negative error value in failure.
793 */
794int __init omap_control_init(void)
795{
796 struct device_node *np, *scm_conf;
797 const struct of_device_id *match;
798 const struct omap_prcm_init_data *data;
799 int ret;
800 struct regmap *syscon;
801 static struct notifier_block nb;
802
803 for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
804 data = match->data;
805
806 /*
807 * Check if we have scm_conf node, if yes, use this to
808 * access clock registers.
809 */
810 scm_conf = of_get_child_by_name(np, "scm_conf");
811
812 if (scm_conf) {
813 syscon = syscon_node_to_regmap(scm_conf);
814
815 if (IS_ERR(syscon)) {
816 ret = PTR_ERR(syscon);
817 goto of_node_put;
818 }
819
820 if (of_get_child_by_name(scm_conf, "clocks")) {
821 ret = omap2_clk_provider_init(scm_conf,
822 data->index,
823 syscon, NULL);
824 if (ret)
825 goto of_node_put;
826 }
827 } else {
828 /* No scm_conf found, direct access */
829 ret = omap2_clk_provider_init(np, data->index, NULL,
830 data->mem);
831 if (ret)
832 goto of_node_put;
833 }
834 }
835
836 /* Only AM43XX can lose ctrl registers context during rtc-ddr suspend */
837 if (soc_is_am43xx()) {
838 nb.notifier_call = cpu_notifier;
839 cpu_pm_register_notifier(&nb);
840 }
841
842 return 0;
843
844of_node_put:
845 of_node_put(np);
846 return ret;
847
848}
849
850/**
851 * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
852 *
853 * Legacy iomap init for clock provider. Needed only by legacy boot mode,
854 * where the base addresses are not parsed from DT, but still required
855 * by the clock driver to be setup properly.
856 */
857void __init omap3_control_legacy_iomap_init(void)
858{
859 omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
860}
1/*
2 * OMAP2/3 System Control Module register access
3 *
4 * Copyright (C) 2007, 2012 Texas Instruments, Inc.
5 * Copyright (C) 2007 Nokia Corporation
6 *
7 * Written by Paul Walmsley
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13#undef DEBUG
14
15#include <linux/kernel.h>
16#include <linux/io.h>
17#include <linux/of_address.h>
18#include <linux/regmap.h>
19#include <linux/mfd/syscon.h>
20
21#include "soc.h"
22#include "iomap.h"
23#include "common.h"
24#include "cm-regbits-34xx.h"
25#include "prm-regbits-34xx.h"
26#include "prm3xxx.h"
27#include "cm3xxx.h"
28#include "sdrc.h"
29#include "pm.h"
30#include "control.h"
31#include "clock.h"
32
33/* Used by omap3_ctrl_save_padconf() */
34#define START_PADCONF_SAVE 0x2
35#define PADCONF_SAVE_DONE 0x1
36
37static void __iomem *omap2_ctrl_base;
38static s16 omap2_ctrl_offset;
39
40#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
41struct omap3_scratchpad {
42 u32 boot_config_ptr;
43 u32 public_restore_ptr;
44 u32 secure_ram_restore_ptr;
45 u32 sdrc_module_semaphore;
46 u32 prcm_block_offset;
47 u32 sdrc_block_offset;
48};
49
50struct omap3_scratchpad_prcm_block {
51 u32 prm_contents[2];
52 u32 cm_contents[11];
53 u32 prcm_block_size;
54};
55
56struct omap3_scratchpad_sdrc_block {
57 u16 sysconfig;
58 u16 cs_cfg;
59 u16 sharing;
60 u16 err_type;
61 u32 dll_a_ctrl;
62 u32 dll_b_ctrl;
63 u32 power;
64 u32 cs_0;
65 u32 mcfg_0;
66 u16 mr_0;
67 u16 emr_1_0;
68 u16 emr_2_0;
69 u16 emr_3_0;
70 u32 actim_ctrla_0;
71 u32 actim_ctrlb_0;
72 u32 rfr_ctrl_0;
73 u32 cs_1;
74 u32 mcfg_1;
75 u16 mr_1;
76 u16 emr_1_1;
77 u16 emr_2_1;
78 u16 emr_3_1;
79 u32 actim_ctrla_1;
80 u32 actim_ctrlb_1;
81 u32 rfr_ctrl_1;
82 u16 dcdl_1_ctrl;
83 u16 dcdl_2_ctrl;
84 u32 flags;
85 u32 block_size;
86};
87
88void *omap3_secure_ram_storage;
89
90/*
91 * This is used to store ARM registers in SDRAM before attempting
92 * an MPU OFF. The save and restore happens from the SRAM sleep code.
93 * The address is stored in scratchpad, so that it can be used
94 * during the restore path.
95 */
96u32 omap3_arm_context[128];
97
98struct omap3_control_regs {
99 u32 sysconfig;
100 u32 devconf0;
101 u32 mem_dftrw0;
102 u32 mem_dftrw1;
103 u32 msuspendmux_0;
104 u32 msuspendmux_1;
105 u32 msuspendmux_2;
106 u32 msuspendmux_3;
107 u32 msuspendmux_4;
108 u32 msuspendmux_5;
109 u32 sec_ctrl;
110 u32 devconf1;
111 u32 csirxfe;
112 u32 iva2_bootaddr;
113 u32 iva2_bootmod;
114 u32 wkup_ctrl;
115 u32 debobs_0;
116 u32 debobs_1;
117 u32 debobs_2;
118 u32 debobs_3;
119 u32 debobs_4;
120 u32 debobs_5;
121 u32 debobs_6;
122 u32 debobs_7;
123 u32 debobs_8;
124 u32 prog_io0;
125 u32 prog_io1;
126 u32 dss_dpll_spreading;
127 u32 core_dpll_spreading;
128 u32 per_dpll_spreading;
129 u32 usbhost_dpll_spreading;
130 u32 pbias_lite;
131 u32 temp_sensor;
132 u32 sramldo4;
133 u32 sramldo5;
134 u32 csi;
135 u32 padconf_sys_nirq;
136};
137
138static struct omap3_control_regs control_context;
139#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
140
141void __init omap2_set_globals_control(void __iomem *ctrl)
142{
143 omap2_ctrl_base = ctrl;
144}
145
146u8 omap_ctrl_readb(u16 offset)
147{
148 u32 val;
149 u8 byte_offset = offset & 0x3;
150
151 val = omap_ctrl_readl(offset);
152
153 return (val >> (byte_offset * 8)) & 0xff;
154}
155
156u16 omap_ctrl_readw(u16 offset)
157{
158 u32 val;
159 u16 byte_offset = offset & 0x2;
160
161 val = omap_ctrl_readl(offset);
162
163 return (val >> (byte_offset * 8)) & 0xffff;
164}
165
166u32 omap_ctrl_readl(u16 offset)
167{
168 offset &= 0xfffc;
169
170 return readl_relaxed(omap2_ctrl_base + offset);
171}
172
173void omap_ctrl_writeb(u8 val, u16 offset)
174{
175 u32 tmp;
176 u8 byte_offset = offset & 0x3;
177
178 tmp = omap_ctrl_readl(offset);
179
180 tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
181 tmp |= val << (byte_offset * 8);
182
183 omap_ctrl_writel(tmp, offset);
184}
185
186void omap_ctrl_writew(u16 val, u16 offset)
187{
188 u32 tmp;
189 u8 byte_offset = offset & 0x2;
190
191 tmp = omap_ctrl_readl(offset);
192
193 tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
194 tmp |= val << (byte_offset * 8);
195
196 omap_ctrl_writel(tmp, offset);
197}
198
199void omap_ctrl_writel(u32 val, u16 offset)
200{
201 offset &= 0xfffc;
202 writel_relaxed(val, omap2_ctrl_base + offset);
203}
204
205#ifdef CONFIG_ARCH_OMAP3
206
207/**
208 * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
209 * @bootmode: 8-bit value to pass to some boot code
210 *
211 * Set the bootmode in the scratchpad RAM. This is used after the
212 * system restarts. Not sure what actually uses this - it may be the
213 * bootloader, rather than the boot ROM - contrary to the preserved
214 * comment below. No return value.
215 */
216void omap3_ctrl_write_boot_mode(u8 bootmode)
217{
218 u32 l;
219
220 l = ('B' << 24) | ('M' << 16) | bootmode;
221
222 /*
223 * Reserve the first word in scratchpad for communicating
224 * with the boot ROM. A pointer to a data structure
225 * describing the boot process can be stored there,
226 * cf. OMAP34xx TRM, Initialization / Software Booting
227 * Configuration.
228 *
229 * XXX This should use some omap_ctrl_writel()-type function
230 */
231 writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
232}
233
234#endif
235
236/**
237 * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
238 * @bootaddr: physical address of the boot loader
239 *
240 * Set boot address for the boot loader of a supported processor
241 * when a power ON sequence occurs.
242 */
243void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
244{
245 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
246 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
247 cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
248 soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
249 0;
250
251 if (!offset) {
252 pr_err("%s: unsupported omap type\n", __func__);
253 return;
254 }
255
256 omap_ctrl_writel(bootaddr, offset);
257}
258
259/**
260 * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
261 * @bootmode: 8-bit value to pass to some boot code
262 *
263 * Sets boot mode for the boot loader of a supported processor
264 * when a power ON sequence occurs.
265 */
266void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
267{
268 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
269 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
270 0;
271
272 if (!offset) {
273 pr_err("%s: unsupported omap type\n", __func__);
274 return;
275 }
276
277 omap_ctrl_writel(bootmode, offset);
278}
279
280#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
281/*
282 * Clears the scratchpad contents in case of cold boot-
283 * called during bootup
284 */
285void omap3_clear_scratchpad_contents(void)
286{
287 u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
288 void __iomem *v_addr;
289 u32 offset = 0;
290
291 v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
292 if (omap3xxx_prm_clear_global_cold_reset()) {
293 for ( ; offset <= max_offset; offset += 0x4)
294 writel_relaxed(0x0, (v_addr + offset));
295 }
296}
297
298/* Populate the scratchpad structure with restore structure */
299void omap3_save_scratchpad_contents(void)
300{
301 void __iomem *scratchpad_address;
302 u32 arm_context_addr;
303 struct omap3_scratchpad scratchpad_contents;
304 struct omap3_scratchpad_prcm_block prcm_block_contents;
305 struct omap3_scratchpad_sdrc_block sdrc_block_contents;
306
307 /*
308 * Populate the Scratchpad contents
309 *
310 * The "get_*restore_pointer" functions are used to provide a
311 * physical restore address where the ROM code jumps while waking
312 * up from MPU OFF/OSWR state.
313 * The restore pointer is stored into the scratchpad.
314 */
315 scratchpad_contents.boot_config_ptr = 0x0;
316 if (cpu_is_omap3630())
317 scratchpad_contents.public_restore_ptr =
318 __pa_symbol(omap3_restore_3630);
319 else if (omap_rev() != OMAP3430_REV_ES3_0 &&
320 omap_rev() != OMAP3430_REV_ES3_1 &&
321 omap_rev() != OMAP3430_REV_ES3_1_2)
322 scratchpad_contents.public_restore_ptr =
323 __pa_symbol(omap3_restore);
324 else
325 scratchpad_contents.public_restore_ptr =
326 __pa_symbol(omap3_restore_es3);
327
328 if (omap_type() == OMAP2_DEVICE_TYPE_GP)
329 scratchpad_contents.secure_ram_restore_ptr = 0x0;
330 else
331 scratchpad_contents.secure_ram_restore_ptr =
332 (u32) __pa(omap3_secure_ram_storage);
333 scratchpad_contents.sdrc_module_semaphore = 0x0;
334 scratchpad_contents.prcm_block_offset = 0x2C;
335 scratchpad_contents.sdrc_block_offset = 0x64;
336
337 /* Populate the PRCM block contents */
338 omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
339 omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
340
341 prcm_block_contents.prcm_block_size = 0x0;
342
343 /* Populate the SDRC block contents */
344 sdrc_block_contents.sysconfig =
345 (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
346 sdrc_block_contents.cs_cfg =
347 (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
348 sdrc_block_contents.sharing =
349 (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
350 sdrc_block_contents.err_type =
351 (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
352 sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
353 sdrc_block_contents.dll_b_ctrl = 0x0;
354 /*
355 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
356 * be programed to issue automatic self refresh on timeout
357 * of AUTO_CNT = 1 prior to any transition to OFF mode.
358 */
359 if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
360 && (omap_rev() >= OMAP3430_REV_ES3_0))
361 sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
362 ~(SDRC_POWER_AUTOCOUNT_MASK|
363 SDRC_POWER_CLKCTRL_MASK)) |
364 (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
365 SDRC_SELF_REFRESH_ON_AUTOCOUNT;
366 else
367 sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
368
369 sdrc_block_contents.cs_0 = 0x0;
370 sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
371 sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
372 sdrc_block_contents.emr_1_0 = 0x0;
373 sdrc_block_contents.emr_2_0 = 0x0;
374 sdrc_block_contents.emr_3_0 = 0x0;
375 sdrc_block_contents.actim_ctrla_0 =
376 sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
377 sdrc_block_contents.actim_ctrlb_0 =
378 sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
379 sdrc_block_contents.rfr_ctrl_0 =
380 sdrc_read_reg(SDRC_RFR_CTRL_0);
381 sdrc_block_contents.cs_1 = 0x0;
382 sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
383 sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
384 sdrc_block_contents.emr_1_1 = 0x0;
385 sdrc_block_contents.emr_2_1 = 0x0;
386 sdrc_block_contents.emr_3_1 = 0x0;
387 sdrc_block_contents.actim_ctrla_1 =
388 sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
389 sdrc_block_contents.actim_ctrlb_1 =
390 sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
391 sdrc_block_contents.rfr_ctrl_1 =
392 sdrc_read_reg(SDRC_RFR_CTRL_1);
393 sdrc_block_contents.dcdl_1_ctrl = 0x0;
394 sdrc_block_contents.dcdl_2_ctrl = 0x0;
395 sdrc_block_contents.flags = 0x0;
396 sdrc_block_contents.block_size = 0x0;
397
398 arm_context_addr = __pa_symbol(omap3_arm_context);
399
400 /* Copy all the contents to the scratchpad location */
401 scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
402 memcpy_toio(scratchpad_address, &scratchpad_contents,
403 sizeof(scratchpad_contents));
404 /* Scratchpad contents being 32 bits, a divide by 4 done here */
405 memcpy_toio(scratchpad_address +
406 scratchpad_contents.prcm_block_offset,
407 &prcm_block_contents, sizeof(prcm_block_contents));
408 memcpy_toio(scratchpad_address +
409 scratchpad_contents.sdrc_block_offset,
410 &sdrc_block_contents, sizeof(sdrc_block_contents));
411 /*
412 * Copies the address of the location in SDRAM where ARM
413 * registers get saved during a MPU OFF transition.
414 */
415 memcpy_toio(scratchpad_address +
416 scratchpad_contents.sdrc_block_offset +
417 sizeof(sdrc_block_contents), &arm_context_addr, 4);
418}
419
420void omap3_control_save_context(void)
421{
422 control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
423 control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
424 control_context.mem_dftrw0 =
425 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
426 control_context.mem_dftrw1 =
427 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
428 control_context.msuspendmux_0 =
429 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
430 control_context.msuspendmux_1 =
431 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
432 control_context.msuspendmux_2 =
433 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
434 control_context.msuspendmux_3 =
435 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
436 control_context.msuspendmux_4 =
437 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
438 control_context.msuspendmux_5 =
439 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
440 control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
441 control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
442 control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
443 control_context.iva2_bootaddr =
444 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
445 control_context.iva2_bootmod =
446 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
447 control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
448 control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
449 control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
450 control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
451 control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
452 control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
453 control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
454 control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
455 control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
456 control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
457 control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
458 control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
459 control_context.dss_dpll_spreading =
460 omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
461 control_context.core_dpll_spreading =
462 omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
463 control_context.per_dpll_spreading =
464 omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
465 control_context.usbhost_dpll_spreading =
466 omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
467 control_context.pbias_lite =
468 omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
469 control_context.temp_sensor =
470 omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
471 control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
472 control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
473 control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
474 control_context.padconf_sys_nirq =
475 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
476}
477
478void omap3_control_restore_context(void)
479{
480 omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
481 omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
482 omap_ctrl_writel(control_context.mem_dftrw0,
483 OMAP343X_CONTROL_MEM_DFTRW0);
484 omap_ctrl_writel(control_context.mem_dftrw1,
485 OMAP343X_CONTROL_MEM_DFTRW1);
486 omap_ctrl_writel(control_context.msuspendmux_0,
487 OMAP2_CONTROL_MSUSPENDMUX_0);
488 omap_ctrl_writel(control_context.msuspendmux_1,
489 OMAP2_CONTROL_MSUSPENDMUX_1);
490 omap_ctrl_writel(control_context.msuspendmux_2,
491 OMAP2_CONTROL_MSUSPENDMUX_2);
492 omap_ctrl_writel(control_context.msuspendmux_3,
493 OMAP2_CONTROL_MSUSPENDMUX_3);
494 omap_ctrl_writel(control_context.msuspendmux_4,
495 OMAP2_CONTROL_MSUSPENDMUX_4);
496 omap_ctrl_writel(control_context.msuspendmux_5,
497 OMAP2_CONTROL_MSUSPENDMUX_5);
498 omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
499 omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
500 omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
501 omap_ctrl_writel(control_context.iva2_bootaddr,
502 OMAP343X_CONTROL_IVA2_BOOTADDR);
503 omap_ctrl_writel(control_context.iva2_bootmod,
504 OMAP343X_CONTROL_IVA2_BOOTMOD);
505 omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
506 omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
507 omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
508 omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
509 omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
510 omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
511 omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
512 omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
513 omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
514 omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
515 omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
516 omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
517 omap_ctrl_writel(control_context.dss_dpll_spreading,
518 OMAP343X_CONTROL_DSS_DPLL_SPREADING);
519 omap_ctrl_writel(control_context.core_dpll_spreading,
520 OMAP343X_CONTROL_CORE_DPLL_SPREADING);
521 omap_ctrl_writel(control_context.per_dpll_spreading,
522 OMAP343X_CONTROL_PER_DPLL_SPREADING);
523 omap_ctrl_writel(control_context.usbhost_dpll_spreading,
524 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
525 omap_ctrl_writel(control_context.pbias_lite,
526 OMAP343X_CONTROL_PBIAS_LITE);
527 omap_ctrl_writel(control_context.temp_sensor,
528 OMAP343X_CONTROL_TEMP_SENSOR);
529 omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
530 omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
531 omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
532 omap_ctrl_writel(control_context.padconf_sys_nirq,
533 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
534}
535
536void omap3630_ctrl_disable_rta(void)
537{
538 if (!cpu_is_omap3630())
539 return;
540 omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
541}
542
543/**
544 * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
545 *
546 * Tell the SCM to start saving the padconf registers, then wait for
547 * the process to complete. Returns 0 unconditionally, although it
548 * should also eventually be able to return -ETIMEDOUT, if the save
549 * does not complete.
550 *
551 * XXX This function is missing a timeout. What should it be?
552 */
553int omap3_ctrl_save_padconf(void)
554{
555 u32 cpo;
556
557 /* Save the padconf registers */
558 cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
559 cpo |= START_PADCONF_SAVE;
560 omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
561
562 /* wait for the save to complete */
563 while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
564 & PADCONF_SAVE_DONE))
565 udelay(1);
566
567 return 0;
568}
569
570/**
571 * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
572 *
573 * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
574 * force disable IVA2 so that it does not prevent any low-power states.
575 */
576static void __init omap3_ctrl_set_iva_bootmode_idle(void)
577{
578 omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
579 OMAP343X_CONTROL_IVA2_BOOTMOD);
580}
581
582/**
583 * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
584 *
585 * Sets up the pads controlling the stacked modem in such way that the
586 * device can enter idle.
587 */
588static void __init omap3_ctrl_setup_d2d_padconf(void)
589{
590 u16 mask, padconf;
591
592 /*
593 * In a stand alone OMAP3430 where there is not a stacked
594 * modem for the D2D Idle Ack and D2D MStandby must be pulled
595 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
596 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
597 */
598 mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
599 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
600 padconf |= mask;
601 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
602
603 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
604 padconf |= mask;
605 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
606}
607
608/**
609 * omap3_ctrl_init - does static initializations for control module
610 *
611 * Initializes system control module. This sets up the sysconfig autoidle,
612 * and sets up modem and iva2 so that they can be idled properly.
613 */
614void __init omap3_ctrl_init(void)
615{
616 omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
617
618 omap3_ctrl_set_iva_bootmode_idle();
619
620 omap3_ctrl_setup_d2d_padconf();
621}
622#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
623
624struct control_init_data {
625 int index;
626 void __iomem *mem;
627 s16 offset;
628};
629
630static struct control_init_data ctrl_data = {
631 .index = TI_CLKM_CTRL,
632};
633
634static const struct control_init_data omap2_ctrl_data = {
635 .index = TI_CLKM_CTRL,
636 .offset = -OMAP2_CONTROL_GENERAL,
637};
638
639static const struct control_init_data ctrl_aux_data = {
640 .index = TI_CLKM_CTRL_AUX,
641};
642
643static const struct of_device_id omap_scrm_dt_match_table[] = {
644 { .compatible = "ti,am3-scm", .data = &ctrl_data },
645 { .compatible = "ti,am4-scm", .data = &ctrl_data },
646 { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
647 { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
648 { .compatible = "ti,dm814-scm", .data = &ctrl_data },
649 { .compatible = "ti,dm816-scrm", .data = &ctrl_data },
650 { .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
651 { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
652 { .compatible = "ti,omap5-scm-wkup-pad-conf", .data = &ctrl_aux_data },
653 { .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
654 { }
655};
656
657/**
658 * omap2_control_base_init - initialize iomappings for the control driver
659 *
660 * Detects and initializes the iomappings for the control driver, based
661 * on the DT data. Returns 0 in success, negative error value
662 * otherwise.
663 */
664int __init omap2_control_base_init(void)
665{
666 struct device_node *np;
667 const struct of_device_id *match;
668 struct control_init_data *data;
669 void __iomem *mem;
670
671 for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
672 data = (struct control_init_data *)match->data;
673
674 mem = of_iomap(np, 0);
675 if (!mem)
676 return -ENOMEM;
677
678 if (data->index == TI_CLKM_CTRL) {
679 omap2_ctrl_base = mem;
680 omap2_ctrl_offset = data->offset;
681 }
682
683 data->mem = mem;
684 }
685
686 return 0;
687}
688
689/**
690 * omap_control_init - low level init for the control driver
691 *
692 * Initializes the low level clock infrastructure for control driver.
693 * Returns 0 in success, negative error value in failure.
694 */
695int __init omap_control_init(void)
696{
697 struct device_node *np, *scm_conf;
698 const struct of_device_id *match;
699 const struct omap_prcm_init_data *data;
700 int ret;
701 struct regmap *syscon;
702
703 for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
704 data = match->data;
705
706 /*
707 * Check if we have scm_conf node, if yes, use this to
708 * access clock registers.
709 */
710 scm_conf = of_get_child_by_name(np, "scm_conf");
711
712 if (scm_conf) {
713 syscon = syscon_node_to_regmap(scm_conf);
714
715 if (IS_ERR(syscon))
716 return PTR_ERR(syscon);
717
718 if (of_get_child_by_name(scm_conf, "clocks")) {
719 ret = omap2_clk_provider_init(scm_conf,
720 data->index,
721 syscon, NULL);
722 if (ret)
723 return ret;
724 }
725 } else {
726 /* No scm_conf found, direct access */
727 ret = omap2_clk_provider_init(np, data->index, NULL,
728 data->mem);
729 if (ret)
730 return ret;
731 }
732 }
733
734 return 0;
735}
736
737/**
738 * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
739 *
740 * Legacy iomap init for clock provider. Needed only by legacy boot mode,
741 * where the base addresses are not parsed from DT, but still required
742 * by the clock driver to be setup properly.
743 */
744void __init omap3_control_legacy_iomap_init(void)
745{
746 omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
747}