Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Support for Variscite DART-MX6 Module
4 *
5 * Copyright 2017 BayLibre, SAS
6 * Author: Neil Armstrong <narmstrong@baylibre.com>
7 */
8
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/sound/fsl-imx-audmux.h>
11
12/ {
13 memory@10000000 {
14 device_type = "memory";
15 reg = <0x10000000 0x40000000>;
16 };
17
18 reg_3p3v: regulator-3p3v {
19 compatible = "regulator-fixed";
20 regulator-name = "3P3V";
21 regulator-min-microvolt = <3300000>;
22 regulator-max-microvolt = <3300000>;
23 regulator-always-on;
24 };
25
26 reg_wl18xx_vmmc: regulator-wl18xx {
27 compatible = "regulator-fixed";
28 regulator-name = "vwl1807";
29 regulator-min-microvolt = <1800000>;
30 regulator-max-microvolt = <1800000>;
31 gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
32 enable-active-high;
33 startup-delay-us = <70000>;
34 };
35};
36
37&audmux {
38 pinctrl-names = "default";
39 pinctrl-0 = <&pinctrl_audmux>;
40 status = "okay";
41
42 ssi2 {
43 fsl,audmux-port = <1>;
44 fsl,port-config = <
45 (IMX_AUDMUX_V2_PTCR_SYN |
46 IMX_AUDMUX_V2_PTCR_TFSDIR |
47 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
48 IMX_AUDMUX_V2_PTCR_TCLKDIR |
49 IMX_AUDMUX_V2_PTCR_TCSEL(2))
50 IMX_AUDMUX_V2_PDCR_RXDSEL(2)
51 >;
52 };
53
54 aud3 {
55 fsl,audmux-port = <2>;
56 fsl,port-config = <
57 IMX_AUDMUX_V2_PTCR_SYN
58 IMX_AUDMUX_V2_PDCR_RXDSEL(1)
59 >;
60 };
61};
62
63&can1 {
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_flexcan1>;
66 status = "disabled";
67};
68
69&can2 {
70 pinctrl-names = "default";
71 pinctrl-0 = <&pinctrl_flexcan2>;
72 status = "disabled";
73};
74
75&ecspi1 {
76 pinctrl-names = "default";
77 pinctrl-0 = <&pinctrl_ecspi1>;
78 status = "disabled";
79};
80
81&fec {
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_enet>;
84 phy-mode = "rgmii";
85 status = "disabled";
86};
87
88&hdmi {
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_hdmicec>;
91 ddc-i2c-bus = <&i2c1>;
92 status = "disabled";
93};
94
95&i2c1 {
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_i2c1>;
98 status = "disabled";
99};
100
101&i2c2 {
102 clock-frequency = <100000>;
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_i2c2>;
105 status = "okay";
106
107 pmic@8 {
108 pinctrl-names = "default";
109 pinctrl-0 = <&pinctrl_pmic>;
110 compatible = "fsl,pfuze100";
111 reg = <0x08>;
112
113 regulators {
114 sw1a_reg: sw1ab {
115 regulator-min-microvolt = <300000>;
116 regulator-max-microvolt = <1875000>;
117 regulator-boot-on;
118 regulator-always-on;
119 regulator-ramp-delay = <6250>;
120 };
121
122 sw1c_reg: sw1c {
123 regulator-min-microvolt = <300000>;
124 regulator-max-microvolt = <1875000>;
125 regulator-boot-on;
126 regulator-always-on;
127 regulator-ramp-delay = <6250>;
128 };
129
130 sw2_reg: sw2 {
131 regulator-min-microvolt = <800000>;
132 regulator-max-microvolt = <3300000>;
133 regulator-boot-on;
134 regulator-always-on;
135 };
136
137 sw3a_reg: sw3a {
138 regulator-min-microvolt = <800000>;
139 regulator-max-microvolt = <3950000>;
140 regulator-boot-on;
141 regulator-always-on;
142 };
143
144 sw3b_reg: sw3b {
145 regulator-min-microvolt = <800000>;
146 regulator-max-microvolt = <3950000>;
147 regulator-boot-on;
148 regulator-always-on;
149 };
150
151 sw4_reg: sw4 {
152 regulator-min-microvolt = <800000>;
153 regulator-max-microvolt = <3950000>;
154 };
155
156 snvs_reg: vsnvs {
157 regulator-min-microvolt = <1200000>;
158 regulator-max-microvolt = <3000000>;
159 regulator-boot-on;
160 regulator-always-on;
161 };
162
163 vref_reg: vrefddr {
164 regulator-boot-on;
165 regulator-always-on;
166 };
167
168 vgen6_reg: vgen6 {
169 regulator-min-microvolt = <2800000>;
170 regulator-max-microvolt = <2800000>;
171 regulator-always-on;
172 regulator-boot-on;
173 };
174 };
175 };
176
177 tlv320aic3106: codec@1b {
178 compatible = "ti,tlv320aic3106";
179 reg = <0x1b>;
180 #sound-dai-cells = <0>;
181 DRVDD-supply = <®_3p3v>;
182 AVDD-supply = <®_3p3v>;
183 IOVDD-supply = <®_3p3v>;
184 DVDD-supply = <®_3p3v>;
185 ai3x-ocmv = <0>;
186 reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
187 };
188};
189
190&i2c3 {
191 pinctrl-names = "default";
192 pinctrl-0 = <&pinctrl_i2c3>;
193 status = "disabled";
194};
195
196&iomuxc {
197 pinctrl_audmux: audmux {
198 fsl,pins = <
199 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
200 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
201 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
202 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
203 /* Audio Clock */
204 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
205 >;
206 };
207
208 pinctrl_bt: bt {
209 fsl,pins = <
210 /* Bluetooth enable */
211 MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b1
212 /* Bluetooth Slow Clock */
213 MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x000b0
214 >;
215 };
216
217 pinctrl_ecspi1: ecspi1grp {
218 fsl,pins = <
219 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
220 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
221 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
222 /* SPI1 CS0 */
223 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
224 /* SPI1 CS1 */
225 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
226 >;
227 };
228
229 pinctrl_enet: enetgrp {
230 fsl,pins = <
231 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
232 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
233 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
234 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
235 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
236 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
237 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
238 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
239 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
240 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
241 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
242 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
243 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
244 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
245 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
246 >;
247 };
248
249 pinctrl_flexcan1: flexcan1grp {
250 fsl,pins = <
251 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
252 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
253 >;
254 };
255
256 pinctrl_flexcan2: flexcan2grp {
257 fsl,pins = <
258 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
259 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
260 >;
261 };
262
263 pinctrl_hdmicec: hdmicecgrp {
264 fsl,pins = <
265 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
266 >;
267 };
268
269 pinctrl_i2c1: i2c1grp {
270 fsl,pins = <
271 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
272 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
273 >;
274 };
275
276 pinctrl_i2c2: i2c2grp {
277 fsl,pins = <
278 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
279 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
280 >;
281 };
282
283 pinctrl_i2c3: i2c3grp {
284 fsl,pins = <
285 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
286 MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
287 >;
288 };
289
290 pinctrl_pmic: pmicgrp {
291 fsl,pins = <
292 /* PMIC INT */
293 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1
294 >;
295 };
296
297 pinctrl_pwm2: pwm2grp {
298 fsl,pins = <
299 MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
300 >;
301 };
302
303 pinctrl_uart1: uart1grp {
304 fsl,pins = <
305 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
306 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
307 >;
308 };
309
310 pinctrl_uart2: uart2grp {
311 fsl,pins = <
312 MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
313 MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
314 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
315 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
316 >;
317 };
318
319 pinctrl_uart3: uart3grp {
320 fsl,pins = <
321 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
322 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
323 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
324 MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
325 >;
326 };
327
328 pinctrl_usbotg: usbotggrp {
329 fsl,pins = <
330 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
331 >;
332 };
333
334 pinctrl_usdhc1: usdhc1grp {
335 fsl,pins = <
336 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
337 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
338 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
339 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
340 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
341 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
342 /* WL_EN */
343 MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071
344 /* WL_IRQ */
345 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x17071
346 >;
347 };
348
349 pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
350 fsl,pins = <
351 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9
352 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9
353 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9
354 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9
355 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9
356 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9
357 >;
358 };
359
360 pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
361 fsl,pins = <
362 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170F9
363 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100F9
364 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170F9
365 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170F9
366 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170F9
367 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170F9
368 >;
369 };
370
371 pinctrl_usdhc2: usdhc2grp {
372 fsl,pins = <
373 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
374 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
375 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
376 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
377 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
378 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
379 >;
380 };
381
382 pinctrl_usdhc3: usdhc3grp {
383 fsl,pins = <
384 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
385 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
386 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
387 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
388 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
389 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
390 >;
391 };
392};
393
394&pcie {
395 fsl,tx-swing-full = <103>;
396 fsl,tx-swing-low = <103>;
397 reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
398 status = "disabled";
399};
400
401&pwm2 {
402 pinctrl-names = "default";
403 pinctrl-0 = <&pinctrl_pwm2>;
404 status = "disabled";
405};
406
407®_arm {
408 vin-supply = <&sw1a_reg>;
409};
410
411®_pu {
412 vin-supply = <&sw1c_reg>;
413};
414
415®_soc {
416 vin-supply = <&sw1c_reg>;
417};
418
419&snvs_poweroff {
420 status = "okay";
421};
422
423&ssi2 {
424 status = "okay";
425};
426
427&uart1 {
428 pinctrl-names = "default";
429 pinctrl-0 = <&pinctrl_uart1>;
430 status = "disabled";
431};
432
433&uart2 {
434 pinctrl-names = "default";
435 pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
436 uart-has-rtscts;
437 status = "okay";
438
439 bluetooth {
440 compatible = "ti,wl1835-st";
441 enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
442 };
443};
444
445&uart3 {
446 pinctrl-names = "default";
447 pinctrl-0 = <&pinctrl_uart3>;
448 uart-has-rtscts;
449 status = "disabled";
450};
451
452&usbh1 {
453 status = "disabled";
454};
455
456&usbotg {
457 vbus-supply = <®_usb_otg_vbus>;
458 pinctrl-names = "default";
459 pinctrl-0 = <&pinctrl_usbotg>;
460 disable-over-current;
461 status = "disabled";
462};
463
464&usdhc1 {
465 pinctrl-names = "default", "state_100mhz", "state_200mhz";
466 pinctrl-0 = <&pinctrl_usdhc1>;
467 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
468 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
469 bus-width = <4>;
470 vmmc-supply = <®_wl18xx_vmmc>;
471 non-removable;
472 wakeup-source;
473 keep-power-in-suspend;
474 cap-power-off-card;
475 #address-cells = <1>;
476 #size-cells = <0>;
477 status = "okay";
478
479 wlcore: wlcore@2 {
480 compatible = "ti,wl1835";
481 reg = <2>;
482 interrupt-parent = <&gpio6>;
483 interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
484 ref-clock-frequency = <38400000>;
485 };
486};
487
488&usdhc2 {
489 pinctrl-names = "default";
490 pinctrl-0 = <&pinctrl_usdhc2>;
491 no-1-8-v;
492 keep-power-in-suspend;
493 wakeup-source;
494 status = "disabled";
495};
496
497&usdhc3 {
498 pinctrl-names = "default";
499 pinctrl-0 = <&pinctrl_usdhc3>;
500 non-removable;
501 keep-power-in-suspend;
502 wakeup-source;
503 status = "okay";
504};
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Support for Variscite DART-MX6 Module
4 *
5 * Copyright 2017 BayLibre, SAS
6 * Author: Neil Armstrong <narmstrong@baylibre.com>
7 */
8
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/sound/fsl-imx-audmux.h>
11
12/ {
13 memory@10000000 {
14 reg = <0x10000000 0x40000000>;
15 };
16
17 reg_3p3v: regulator-3p3v {
18 compatible = "regulator-fixed";
19 regulator-name = "3P3V";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
22 regulator-always-on;
23 };
24
25 reg_wl18xx_vmmc: regulator-wl18xx {
26 compatible = "regulator-fixed";
27 regulator-name = "vwl1807";
28 regulator-min-microvolt = <1800000>;
29 regulator-max-microvolt = <1800000>;
30 gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
31 enable-active-high;
32 startup-delay-us = <70000>;
33 };
34};
35
36&audmux {
37 pinctrl-names = "default";
38 pinctrl-0 = <&pinctrl_audmux>;
39 status = "okay";
40
41 ssi2 {
42 fsl,audmux-port = <1>;
43 fsl,port-config = <
44 (IMX_AUDMUX_V2_PTCR_SYN |
45 IMX_AUDMUX_V2_PTCR_TFSDIR |
46 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
47 IMX_AUDMUX_V2_PTCR_TCLKDIR |
48 IMX_AUDMUX_V2_PTCR_TCSEL(2))
49 IMX_AUDMUX_V2_PDCR_RXDSEL(2)
50 >;
51 };
52
53 aud3 {
54 fsl,audmux-port = <2>;
55 fsl,port-config = <
56 IMX_AUDMUX_V2_PTCR_SYN
57 IMX_AUDMUX_V2_PDCR_RXDSEL(1)
58 >;
59 };
60};
61
62&can1 {
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_flexcan1>;
65 status = "disabled";
66};
67
68&can2 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&pinctrl_flexcan2>;
71 status = "disabled";
72};
73
74&ecspi1 {
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_ecspi1>;
77 status = "disabled";
78};
79
80&fec {
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_enet>;
83 phy-mode = "rgmii";
84 status = "disabled";
85};
86
87&hdmi {
88 pinctrl-names = "default";
89 pinctrl-0 = <&pinctrl_hdmicec>;
90 ddc-i2c-bus = <&i2c1>;
91 status = "disabled";
92};
93
94&i2c1 {
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_i2c1>;
97 status = "disabled";
98};
99
100&i2c2 {
101 clock-frequency = <100000>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_i2c2>;
104 status = "okay";
105
106 pmic@8 {
107 pinctrl-names = "default";
108 pinctrl-0 = <&pinctrl_pmic>;
109 compatible = "fsl,pfuze100";
110 reg = <0x08>;
111
112 regulators {
113 sw1a_reg: sw1ab {
114 regulator-min-microvolt = <300000>;
115 regulator-max-microvolt = <1875000>;
116 regulator-boot-on;
117 regulator-always-on;
118 regulator-ramp-delay = <6250>;
119 };
120
121 sw1c_reg: sw1c {
122 regulator-min-microvolt = <300000>;
123 regulator-max-microvolt = <1875000>;
124 regulator-boot-on;
125 regulator-always-on;
126 regulator-ramp-delay = <6250>;
127 };
128
129 sw2_reg: sw2 {
130 regulator-min-microvolt = <800000>;
131 regulator-max-microvolt = <3300000>;
132 regulator-boot-on;
133 regulator-always-on;
134 };
135
136 sw3a_reg: sw3a {
137 regulator-min-microvolt = <800000>;
138 regulator-max-microvolt = <3950000>;
139 regulator-boot-on;
140 regulator-always-on;
141 };
142
143 sw3b_reg: sw3b {
144 regulator-min-microvolt = <800000>;
145 regulator-max-microvolt = <3950000>;
146 regulator-boot-on;
147 regulator-always-on;
148 };
149
150 sw4_reg: sw4 {
151 regulator-min-microvolt = <800000>;
152 regulator-max-microvolt = <3950000>;
153 };
154
155 snvs_reg: vsnvs {
156 regulator-min-microvolt = <1200000>;
157 regulator-max-microvolt = <3000000>;
158 regulator-boot-on;
159 regulator-always-on;
160 };
161
162 vref_reg: vrefddr {
163 regulator-boot-on;
164 regulator-always-on;
165 };
166
167 vgen6_reg: vgen6 {
168 regulator-min-microvolt = <2800000>;
169 regulator-max-microvolt = <2800000>;
170 regulator-always-on;
171 regulator-boot-on;
172 };
173 };
174 };
175
176 tlv320aic3106: codec@1b {
177 compatible = "ti,tlv320aic3106";
178 reg = <0x1b>;
179 #sound-dai-cells = <0>;
180 DRVDD-supply = <®_3p3v>;
181 AVDD-supply = <®_3p3v>;
182 IOVDD-supply = <®_3p3v>;
183 DVDD-supply = <®_3p3v>;
184 ai3x-ocmv = <0>;
185 gpio-reset = <&gpio5 5 GPIO_ACTIVE_LOW>;
186 };
187};
188
189&i2c3 {
190 pinctrl-names = "default";
191 pinctrl-0 = <&pinctrl_i2c3>;
192 status = "disabled";
193};
194
195&iomuxc {
196 pinctrl_audmux: audmux {
197 fsl,pins = <
198 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
199 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
200 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
201 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
202 /* Audio Clock */
203 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
204 >;
205 };
206
207 pinctrl_bt: bt {
208 fsl,pins = <
209 /* Bluetooth enable */
210 MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b1
211 /* Bluetooth Slow Clock */
212 MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x000b0
213 >;
214 };
215
216 pinctrl_ecspi1: ecspi1grp {
217 fsl,pins = <
218 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
219 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
220 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
221 /* SPI1 CS0 */
222 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
223 /* SPI1 CS1 */
224 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
225 >;
226 };
227
228 pinctrl_enet: enetgrp {
229 fsl,pins = <
230 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
231 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
232 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
233 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
234 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
235 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
236 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
237 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
238 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
239 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
240 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
241 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
242 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
243 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
244 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
245 >;
246 };
247
248 pinctrl_flexcan1: flexcan1grp {
249 fsl,pins = <
250 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
251 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
252 >;
253 };
254
255 pinctrl_flexcan2: flexcan2grp {
256 fsl,pins = <
257 MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
258 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
259 >;
260 };
261
262 pinctrl_hdmicec: hdmicecgrp {
263 fsl,pins = <
264 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
265 >;
266 };
267
268 pinctrl_i2c1: i2c1grp {
269 fsl,pins = <
270 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
271 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
272 >;
273 };
274
275 pinctrl_i2c2: i2c2grp {
276 fsl,pins = <
277 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
278 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
279 >;
280 };
281
282 pinctrl_i2c3: i2c3grp {
283 fsl,pins = <
284 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
285 MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
286 >;
287 };
288
289 pinctrl_pmic: pmicgrp {
290 fsl,pins = <
291 /* PMIC INT */
292 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1
293 >;
294 };
295
296 pinctrl_pwm2: pwm2grp {
297 fsl,pins = <
298 MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
299 >;
300 };
301
302 pinctrl_uart1: uart1grp {
303 fsl,pins = <
304 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
305 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
306 >;
307 };
308
309 pinctrl_uart2: uart2grp {
310 fsl,pins = <
311 MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
312 MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
313 MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
314 MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
315 >;
316 };
317
318 pinctrl_uart3: uart3grp {
319 fsl,pins = <
320 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
321 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
322 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
323 MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1
324 >;
325 };
326
327 pinctrl_usbotg: usbotggrp {
328 fsl,pins = <
329 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
330 >;
331 };
332
333 pinctrl_usdhc1: usdhc1grp {
334 fsl,pins = <
335 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
336 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
337 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
338 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
339 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
340 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
341 /* WL_EN */
342 MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x17071
343 /* WL_IRQ */
344 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x17071
345 >;
346 };
347
348 pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
349 fsl,pins = <
350 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9
351 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9
352 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9
353 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9
354 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9
355 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9
356 >;
357 };
358
359 pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
360 fsl,pins = <
361 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170F9
362 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100F9
363 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170F9
364 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170F9
365 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170F9
366 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170F9
367 >;
368 };
369
370 pinctrl_usdhc2: usdhc2grp {
371 fsl,pins = <
372 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
373 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
374 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
375 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
376 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
377 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
378 >;
379 };
380
381 pinctrl_usdhc3: usdhc3grp {
382 fsl,pins = <
383 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
384 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
385 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
386 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
387 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
388 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
389 >;
390 };
391};
392
393&pcie {
394 fsl,tx-swing-full = <103>;
395 fsl,tx-swing-low = <103>;
396 reset-gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
397 status = "disabled";
398};
399
400&pwm2 {
401 pinctrl-names = "default";
402 pinctrl-0 = <&pinctrl_pwm2>;
403 status = "disabled";
404};
405
406®_arm {
407 vin-supply = <&sw1a_reg>;
408};
409
410®_pu {
411 vin-supply = <&sw1c_reg>;
412};
413
414®_soc {
415 vin-supply = <&sw1c_reg>;
416};
417
418&snvs_poweroff {
419 status = "okay";
420};
421
422&ssi2 {
423 status = "okay";
424};
425
426&uart1 {
427 pinctrl-names = "default";
428 pinctrl-0 = <&pinctrl_uart1>;
429 status = "disabled";
430};
431
432&uart2 {
433 pinctrl-names = "default";
434 pinctrl-0 = <&pinctrl_uart2 &pinctrl_bt>;
435 uart-has-rtscts;
436 status = "okay";
437
438 bluetooth {
439 compatible = "ti,wl1835-st";
440 enable-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
441 };
442};
443
444&uart3 {
445 pinctrl-names = "default";
446 pinctrl-0 = <&pinctrl_uart3>;
447 uart-has-rtscts;
448 status = "disabled";
449};
450
451&usbh1 {
452 status = "disabled";
453};
454
455&usbotg {
456 vbus-supply = <®_usb_otg_vbus>;
457 pinctrl-names = "default";
458 pinctrl-0 = <&pinctrl_usbotg>;
459 disable-over-current;
460 status = "disabled";
461};
462
463&usdhc1 {
464 pinctrl-names = "default", "state_100mhz", "state_200mhz";
465 pinctrl-0 = <&pinctrl_usdhc1>;
466 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
467 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
468 bus-width = <4>;
469 vmmc-supply = <®_wl18xx_vmmc>;
470 non-removable;
471 wakeup-source;
472 keep-power-in-suspend;
473 cap-power-off-card;
474 #address-cells = <1>;
475 #size-cells = <0>;
476 status = "okay";
477
478 wlcore: wlcore@2 {
479 compatible = "ti,wl1835";
480 reg = <2>;
481 interrupt-parent = <&gpio6>;
482 interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
483 ref-clock-frequency = <38400000>;
484 };
485};
486
487&usdhc2 {
488 pinctrl-names = "default";
489 pinctrl-0 = <&pinctrl_usdhc2>;
490 no-1-8-v;
491 keep-power-in-suspend;
492 wakeup-source;
493 status = "disabled";
494};
495
496&usdhc3 {
497 pinctrl-names = "default";
498 pinctrl-0 = <&pinctrl_usdhc3>;
499 non-removable;
500 keep-power-in-suspend;
501 wakeup-source;
502 status = "okay";
503};