Loading...
1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/input/input.h>
3#include <dt-bindings/thermal/thermal.h>
4#include "tegra124.dtsi"
5
6/ {
7 aliases {
8 rtc0 = "/i2c@7000d000/pmic@40";
9 rtc1 = "/rtc@7000e000";
10 serial0 = &uarta;
11 };
12
13 chosen {
14 stdout-path = "serial0:115200n8";
15 };
16
17 /*
18 * Note that recent version of the device tree compiler (starting with
19 * version 1.4.2) warn about this node containing a reg property, but
20 * missing a unit-address. However, the bootloader on these Chromebook
21 * devices relies on the full name of this node to be exactly /memory.
22 * Adding the unit-address causes the bootloader to create a /memory
23 * node and write the memory bank configuration to that node, which in
24 * turn leads the kernel to believe that the device has 2 GiB of
25 * memory instead of the amount detected by the bootloader.
26 *
27 * The name of this node is effectively ABI and must not be changed.
28 */
29 memory {
30 device_type = "memory";
31 reg = <0x0 0x80000000 0x0 0x80000000>;
32 };
33
34 /delete-node/ memory@80000000;
35
36 host1x@50000000 {
37 hdmi@54280000 {
38 status = "okay";
39
40 vdd-supply = <&vdd_3v3_hdmi>;
41 pll-supply = <&vdd_hdmi_pll>;
42 hdmi-supply = <&vdd_5v0_hdmi>;
43
44 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
45 nvidia,hpd-gpio =
46 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
47 };
48
49 sor@54540000 {
50 status = "okay";
51
52 avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
53 vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
54
55 nvidia,dpaux = <&dpaux>;
56 nvidia,panel = <&panel>;
57 };
58
59 dpaux@545c0000 {
60 vdd-supply = <&vdd_3v3_panel>;
61 status = "okay";
62 };
63 };
64
65 gpu@57000000 {
66 status = "okay";
67
68 vdd-supply = <&vdd_gpu>;
69 };
70
71 serial@70006000 {
72 /* Debug connector on the bottom of the board near SD card. */
73 status = "okay";
74 };
75
76 pwm@7000a000 {
77 status = "okay";
78 };
79
80 i2c@7000c000 {
81 status = "okay";
82 clock-frequency = <100000>;
83
84 acodec: audio-codec@10 {
85 compatible = "maxim,max98090";
86 reg = <0x10>;
87 interrupt-parent = <&gpio>;
88 interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
89 };
90
91 tmp451: temperature-sensor@4c {
92 compatible = "ti,tmp451";
93 reg = <0x4c>;
94 interrupt-parent = <&gpio>;
95 interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
96
97 #thermal-sensor-cells = <1>;
98 };
99 };
100
101 i2c@7000c400 {
102 status = "okay";
103 clock-frequency = <100000>;
104
105 trackpad@15 {
106 compatible = "elan,ekth3000";
107 reg = <0x15>;
108 interrupt-parent = <&gpio>;
109 interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
110 wakeup-source;
111 };
112 };
113
114 i2c@7000c500 {
115 status = "okay";
116 clock-frequency = <400000>;
117
118 tpm@20 {
119 compatible = "infineon,slb9645tt";
120 reg = <0x20>;
121 };
122 };
123
124 hdmi_ddc: i2c@7000c700 {
125 status = "okay";
126 clock-frequency = <100000>;
127 };
128
129 i2c@7000d000 {
130 status = "okay";
131 clock-frequency = <400000>;
132
133 pmic: pmic@40 {
134 compatible = "ams,as3722";
135 reg = <0x40>;
136 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
137
138 ams,system-power-controller;
139
140 #interrupt-cells = <2>;
141 interrupt-controller;
142
143 gpio-controller;
144 #gpio-cells = <2>;
145
146 pinctrl-names = "default";
147 pinctrl-0 = <&as3722_default>;
148
149 as3722_default: pinmux {
150 gpio0 {
151 pins = "gpio0";
152 function = "gpio";
153 bias-pull-down;
154 };
155
156 gpio1 {
157 pins = "gpio1";
158 function = "gpio";
159 bias-pull-up;
160 };
161
162 gpio2_4_7 {
163 pins = "gpio2", "gpio4", "gpio7";
164 function = "gpio";
165 bias-pull-up;
166 };
167
168 gpio3_6 {
169 pins = "gpio3", "gpio6";
170 bias-high-impedance;
171 };
172
173 gpio5 {
174 pins = "gpio5";
175 function = "clk32k-out";
176 bias-pull-down;
177 };
178 };
179
180 regulators {
181 vsup-sd2-supply = <&vdd_5v0_sys>;
182 vsup-sd3-supply = <&vdd_5v0_sys>;
183 vsup-sd4-supply = <&vdd_5v0_sys>;
184 vsup-sd5-supply = <&vdd_5v0_sys>;
185 vin-ldo0-supply = <&vdd_1v35_lp0>;
186 vin-ldo1-6-supply = <&vdd_3v3_run>;
187 vin-ldo2-5-7-supply = <&vddio_1v8>;
188 vin-ldo3-4-supply = <&vdd_3v3_sys>;
189 vin-ldo9-10-supply = <&vdd_5v0_sys>;
190 vin-ldo11-supply = <&vdd_3v3_run>;
191
192 vdd_cpu: sd0 {
193 regulator-name = "+VDD_CPU_AP";
194 regulator-min-microvolt = <700000>;
195 regulator-max-microvolt = <1350000>;
196 regulator-min-microamp = <3500000>;
197 regulator-max-microamp = <3500000>;
198 regulator-always-on;
199 regulator-boot-on;
200 ams,ext-control = <2>;
201 };
202
203 sd1 {
204 regulator-name = "+VDD_CORE";
205 regulator-min-microvolt = <700000>;
206 regulator-max-microvolt = <1350000>;
207 regulator-min-microamp = <2500000>;
208 regulator-max-microamp = <4000000>;
209 regulator-always-on;
210 regulator-boot-on;
211 ams,ext-control = <1>;
212 };
213
214 vdd_1v35_lp0: sd2 {
215 regulator-name = "+1.35V_LP0(sd2)";
216 regulator-min-microvolt = <1350000>;
217 regulator-max-microvolt = <1350000>;
218 regulator-always-on;
219 regulator-boot-on;
220 };
221
222 sd3 {
223 regulator-name = "+1.35V_LP0(sd3)";
224 regulator-min-microvolt = <1350000>;
225 regulator-max-microvolt = <1350000>;
226 regulator-always-on;
227 regulator-boot-on;
228 };
229
230 vdd_1v05_run: sd4 {
231 regulator-name = "+1.05V_RUN";
232 regulator-min-microvolt = <1050000>;
233 regulator-max-microvolt = <1050000>;
234 };
235
236 vddio_1v8: sd5 {
237 regulator-name = "+1.8V_VDDIO";
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <1800000>;
240 regulator-always-on;
241 };
242
243 vdd_gpu: sd6 {
244 regulator-name = "+VDD_GPU_AP";
245 regulator-min-microvolt = <650000>;
246 regulator-max-microvolt = <1200000>;
247 regulator-min-microamp = <3500000>;
248 regulator-max-microamp = <3500000>;
249 regulator-boot-on;
250 regulator-always-on;
251 };
252
253 avdd_1v05_run: ldo0 {
254 regulator-name = "+1.05V_RUN_AVDD";
255 regulator-min-microvolt = <1050000>;
256 regulator-max-microvolt = <1050000>;
257 regulator-boot-on;
258 regulator-always-on;
259 ams,ext-control = <1>;
260 };
261
262 ldo1 {
263 regulator-name = "+1.8V_RUN_CAM";
264 regulator-min-microvolt = <1800000>;
265 regulator-max-microvolt = <1800000>;
266 };
267
268 ldo2 {
269 regulator-name = "+1.2V_GEN_AVDD";
270 regulator-min-microvolt = <1200000>;
271 regulator-max-microvolt = <1200000>;
272 regulator-boot-on;
273 regulator-always-on;
274 };
275
276 ldo3 {
277 regulator-name = "+1.00V_LP0_VDD_RTC";
278 regulator-min-microvolt = <1000000>;
279 regulator-max-microvolt = <1000000>;
280 regulator-boot-on;
281 regulator-always-on;
282 ams,enable-tracking;
283 };
284
285 vdd_run_cam: ldo4 {
286 regulator-name = "+3.3V_RUN_CAM";
287 regulator-min-microvolt = <2800000>;
288 regulator-max-microvolt = <2800000>;
289 };
290
291 ldo5 {
292 regulator-name = "+1.2V_RUN_CAM_FRONT";
293 regulator-min-microvolt = <1200000>;
294 regulator-max-microvolt = <1200000>;
295 };
296
297 vddio_sdmmc3: ldo6 {
298 regulator-name = "+VDDIO_SDMMC3";
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <3300000>;
301 };
302
303 ldo7 {
304 regulator-name = "+1.05V_RUN_CAM_REAR";
305 regulator-min-microvolt = <1050000>;
306 regulator-max-microvolt = <1050000>;
307 };
308
309 ldo9 {
310 regulator-name = "+2.8V_RUN_TOUCH";
311 regulator-min-microvolt = <2800000>;
312 regulator-max-microvolt = <2800000>;
313 };
314
315 ldo10 {
316 regulator-name = "+2.8V_RUN_CAM_AF";
317 regulator-min-microvolt = <2800000>;
318 regulator-max-microvolt = <2800000>;
319 };
320
321 ldo11 {
322 regulator-name = "+1.8V_RUN_VPP_FUSE";
323 regulator-min-microvolt = <1800000>;
324 regulator-max-microvolt = <1800000>;
325 };
326 };
327 };
328 };
329
330 spi@7000d400 {
331 status = "okay";
332
333 cros_ec: cros-ec@0 {
334 compatible = "google,cros-ec-spi";
335 spi-max-frequency = <3000000>;
336 interrupt-parent = <&gpio>;
337 interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
338 reg = <0>;
339
340 google,cros-ec-spi-msg-delay = <2000>;
341
342 i2c-tunnel {
343 compatible = "google,cros-ec-i2c-tunnel";
344 #address-cells = <1>;
345 #size-cells = <0>;
346
347 google,remote-bus = <0>;
348
349 charger: bq24735@9 {
350 compatible = "ti,bq24735";
351 reg = <0x9>;
352 interrupt-parent = <&gpio>;
353 interrupts = <TEGRA_GPIO(J, 0)
354 IRQ_TYPE_EDGE_BOTH>;
355 ti,ac-detect-gpios = <&gpio
356 TEGRA_GPIO(J, 0)
357 GPIO_ACTIVE_HIGH>;
358 ti,external-control;
359 };
360
361 battery: sbs-battery@b {
362 compatible = "sbs,sbs-battery";
363 reg = <0xb>;
364 sbs,i2c-retry-count = <2>;
365 sbs,poll-retry-count = <10>;
366 power-supplies = <&charger>;
367 };
368 };
369 };
370 };
371
372 spi@7000da00 {
373 status = "okay";
374 spi-max-frequency = <25000000>;
375
376 flash@0 {
377 compatible = "winbond,w25q32dw", "jedec,spi-nor";
378 spi-max-frequency = <25000000>;
379 reg = <0>;
380 };
381 };
382
383 pmc@7000e400 {
384 nvidia,invert-interrupt;
385 nvidia,suspend-mode = <0>;
386 nvidia,cpu-pwr-good-time = <500>;
387 nvidia,cpu-pwr-off-time = <300>;
388 nvidia,core-pwr-good-time = <641 3845>;
389 nvidia,core-pwr-off-time = <61036>;
390 nvidia,core-power-req-active-high;
391 nvidia,sys-clock-req-active-high;
392 };
393
394 cec@70015000 {
395 status = "okay";
396 };
397
398 hda@70030000 {
399 status = "okay";
400 };
401
402 usb@70090000 {
403 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
404 <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
405 <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
406 <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
407 <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
408 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
409
410 avddio-pex-supply = <&vdd_1v05_run>;
411 dvddio-pex-supply = <&vdd_1v05_run>;
412 avdd-usb-supply = <&vdd_3v3_lp0>;
413 avdd-pll-utmip-supply = <&vddio_1v8>;
414 avdd-pll-erefe-supply = <&avdd_1v05_run>;
415 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
416 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
417 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
418
419 status = "okay";
420 };
421
422 padctl@7009f000 {
423 status = "okay";
424
425 avdd-pll-utmip-supply = <&vddio_1v8>;
426 avdd-pll-erefe-supply = <&avdd_1v05_run>;
427 avdd-pex-pll-supply = <&vdd_1v05_run>;
428 hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
429
430 pads {
431 usb2 {
432 status = "okay";
433
434 lanes {
435 usb2-0 {
436 nvidia,function = "xusb";
437 status = "okay";
438 };
439
440 usb2-1 {
441 nvidia,function = "xusb";
442 status = "okay";
443 };
444
445 usb2-2 {
446 nvidia,function = "xusb";
447 status = "okay";
448 };
449 };
450 };
451
452 pcie {
453 status = "okay";
454
455 lanes {
456 pcie-0 {
457 nvidia,function = "usb3-ss";
458 status = "okay";
459 };
460
461 pcie-1 {
462 nvidia,function = "usb3-ss";
463 status = "okay";
464 };
465 };
466 };
467 };
468
469 ports {
470 usb2-0 {
471 vbus-supply = <&vdd_usb1_vbus>;
472 status = "okay";
473 mode = "otg";
474 usb-role-switch;
475 };
476
477 usb2-1 {
478 vbus-supply = <&vdd_run_cam>;
479 status = "okay";
480 mode = "host";
481 };
482
483 usb2-2 {
484 vbus-supply = <&vdd_usb3_vbus>;
485 status = "okay";
486 mode = "host";
487 };
488
489 usb3-0 {
490 nvidia,usb2-companion = <0>;
491 status = "okay";
492 };
493
494 usb3-1 {
495 nvidia,usb2-companion = <1>;
496 status = "okay";
497 };
498 };
499 };
500
501 sdhci0_pwrseq: sdhci0_pwrseq {
502 compatible = "mmc-pwrseq-simple";
503
504 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
505 };
506
507 mmc@700b0000 { /* WiFi/BT on this bus */
508 status = "okay";
509 bus-width = <4>;
510 no-1-8-v;
511 non-removable;
512 mmc-pwrseq = <&sdhci0_pwrseq>;
513 vmmc-supply = <&vdd_3v3_lp0>;
514 vqmmc-supply = <&vddio_1v8>;
515 keep-power-in-suspend;
516 };
517
518 mmc@700b0400 { /* SD Card on this bus */
519 status = "okay";
520 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
521 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
522 bus-width = <4>;
523 no-1-8-v;
524 vqmmc-supply = <&vddio_sdmmc3>;
525 };
526
527 mmc@700b0600 { /* eMMC on this bus */
528 status = "okay";
529 bus-width = <8>;
530 no-1-8-v;
531 non-removable;
532 };
533
534 /* CPU DFLL clock */
535 clock@70110000 {
536 status = "okay";
537 vdd-cpu-supply = <&vdd_cpu>;
538 nvidia,i2c-fs-rate = <400000>;
539 };
540
541 ahub@70300000 {
542 i2s@70301100 {
543 status = "okay";
544 };
545 };
546
547 backlight: backlight {
548 compatible = "pwm-backlight";
549
550 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
551 power-supply = <&vdd_led>;
552 pwms = <&pwm 1 1000000>;
553
554 default-brightness-level = <224>;
555 brightness-levels =
556 < 0 1 2 3 4 5 6 7
557 8 9 10 11 12 13 14 15
558 16 17 18 19 20 21 22 23
559 24 25 26 27 28 29 30 31
560 32 33 34 35 36 37 38 39
561 40 41 42 43 44 45 46 47
562 48 49 50 51 52 53 54 55
563 56 57 58 59 60 61 62 63
564 64 65 66 67 68 69 70 71
565 72 73 74 75 76 77 78 79
566 80 81 82 83 84 85 86 87
567 88 89 90 91 92 93 94 95
568 96 97 98 99 100 101 102 103
569 104 105 106 107 108 109 110 111
570 112 113 114 115 116 117 118 119
571 120 121 122 123 124 125 126 127
572 128 129 130 131 132 133 134 135
573 136 137 138 139 140 141 142 143
574 144 145 146 147 148 149 150 151
575 152 153 154 155 156 157 158 159
576 160 161 162 163 164 165 166 167
577 168 169 170 171 172 173 174 175
578 176 177 178 179 180 181 182 183
579 184 185 186 187 188 189 190 191
580 192 193 194 195 196 197 198 199
581 200 201 202 203 204 205 206 207
582 208 209 210 211 212 213 214 215
583 216 217 218 219 220 221 222 223
584 224 225 226 227 228 229 230 231
585 232 233 234 235 236 237 238 239
586 240 241 242 243 244 245 246 247
587 248 249 250 251 252 253 254 255
588 256>;
589 };
590
591 clk32k_in: clock-32k {
592 compatible = "fixed-clock";
593 clock-frequency = <32768>;
594 #clock-cells = <0>;
595 };
596
597 cpus {
598 cpu@0 {
599 vdd-cpu-supply = <&vdd_cpu>;
600 };
601 };
602
603 gpio-keys {
604 compatible = "gpio-keys";
605
606 switch-lid {
607 label = "Lid";
608 gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
609 linux,input-type = <5>;
610 linux,code = <KEY_RESERVED>;
611 debounce-interval = <1>;
612 wakeup-source;
613 };
614
615 key-power {
616 label = "Power";
617 gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
618 linux,code = <KEY_POWER>;
619 debounce-interval = <30>;
620 wakeup-source;
621 };
622 };
623
624 vdd_mux: regulator-mux {
625 compatible = "regulator-fixed";
626 regulator-name = "+VDD_MUX";
627 regulator-min-microvolt = <12000000>;
628 regulator-max-microvolt = <12000000>;
629 regulator-always-on;
630 regulator-boot-on;
631 };
632
633 vdd_5v0_sys: regulator-5v0sys {
634 compatible = "regulator-fixed";
635 regulator-name = "+5V_SYS";
636 regulator-min-microvolt = <5000000>;
637 regulator-max-microvolt = <5000000>;
638 regulator-always-on;
639 regulator-boot-on;
640 vin-supply = <&vdd_mux>;
641 };
642
643 vdd_3v3_sys: regulator-3v3sys {
644 compatible = "regulator-fixed";
645 regulator-name = "+3.3V_SYS";
646 regulator-min-microvolt = <3300000>;
647 regulator-max-microvolt = <3300000>;
648 regulator-always-on;
649 regulator-boot-on;
650 vin-supply = <&vdd_mux>;
651 };
652
653 vdd_3v3_run: regulator-3v3run {
654 compatible = "regulator-fixed";
655 regulator-name = "+3.3V_RUN";
656 regulator-min-microvolt = <3300000>;
657 regulator-max-microvolt = <3300000>;
658 regulator-always-on;
659 regulator-boot-on;
660 gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
661 enable-active-high;
662 vin-supply = <&vdd_3v3_sys>;
663 };
664
665 vdd_3v3_hdmi: regulator-3v3hdmi {
666 compatible = "regulator-fixed";
667 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
668 regulator-min-microvolt = <3300000>;
669 regulator-max-microvolt = <3300000>;
670 vin-supply = <&vdd_3v3_run>;
671 };
672
673 vdd_led: regulator-led {
674 compatible = "regulator-fixed";
675 regulator-name = "+VDD_LED";
676 gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
677 enable-active-high;
678 vin-supply = <&vdd_mux>;
679 };
680
681 vdd_5v0_ts: regulator-ts {
682 compatible = "regulator-fixed";
683 regulator-name = "+5V_VDD_TS_SW";
684 regulator-min-microvolt = <5000000>;
685 regulator-max-microvolt = <5000000>;
686 regulator-boot-on;
687 gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
688 enable-active-high;
689 vin-supply = <&vdd_5v0_sys>;
690 };
691
692 vdd_usb1_vbus: regulator-usb1 {
693 compatible = "regulator-fixed";
694 regulator-name = "+5V_USB_HS";
695 regulator-min-microvolt = <5000000>;
696 regulator-max-microvolt = <5000000>;
697 gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
698 enable-active-high;
699 gpio-open-drain;
700 vin-supply = <&vdd_5v0_sys>;
701 };
702
703 vdd_usb3_vbus: regulator-usb3 {
704 compatible = "regulator-fixed";
705 regulator-name = "+5V_USB_SS";
706 regulator-min-microvolt = <5000000>;
707 regulator-max-microvolt = <5000000>;
708 gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
709 enable-active-high;
710 gpio-open-drain;
711 vin-supply = <&vdd_5v0_sys>;
712 };
713
714 vdd_3v3_panel: regulator-panel {
715 compatible = "regulator-fixed";
716 regulator-name = "+3.3V_PANEL";
717 regulator-min-microvolt = <3300000>;
718 regulator-max-microvolt = <3300000>;
719 gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
720 enable-active-high;
721 vin-supply = <&vdd_3v3_run>;
722 };
723
724 vdd_3v3_lp0: regulator-lp0 {
725 compatible = "regulator-fixed";
726 regulator-name = "+3.3V_LP0";
727 regulator-min-microvolt = <3300000>;
728 regulator-max-microvolt = <3300000>;
729 /*
730 * TODO: find a way to wire this up with the USB EHCI
731 * controllers so that it can be enabled on demand.
732 */
733 regulator-always-on;
734 gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
735 enable-active-high;
736 vin-supply = <&vdd_3v3_sys>;
737 };
738
739 vdd_hdmi_pll: regulator-hdmipll {
740 compatible = "regulator-fixed";
741 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
742 regulator-min-microvolt = <1050000>;
743 regulator-max-microvolt = <1050000>;
744 gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
745 vin-supply = <&vdd_1v05_run>;
746 };
747
748 vdd_5v0_hdmi: regulator-hdmicon {
749 compatible = "regulator-fixed";
750 regulator-name = "+5V_HDMI_CON";
751 regulator-min-microvolt = <5000000>;
752 regulator-max-microvolt = <5000000>;
753 gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
754 enable-active-high;
755 vin-supply = <&vdd_5v0_sys>;
756 };
757
758 sound {
759 nvidia,audio-routing =
760 "Headphones", "HPR",
761 "Headphones", "HPL",
762 "Speakers", "SPKR",
763 "Speakers", "SPKL",
764 "Mic Jack", "MICBIAS",
765 "DMICL", "Int Mic",
766 "DMICR", "Int Mic",
767 "IN34", "Mic Jack";
768
769 nvidia,i2s-controller = <&tegra_i2s1>;
770 nvidia,audio-codec = <&acodec>;
771
772 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
773 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
774 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
775 clock-names = "pll_a", "pll_a_out0", "mclk";
776
777 assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
778 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
779
780 assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
781 <&tegra_car TEGRA124_CLK_EXTERN1>;
782
783 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
784 nvidia,mic-det-gpios =
785 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
786 };
787
788 gpio-restart {
789 compatible = "gpio-restart";
790 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
791 priority = <200>;
792 };
793
794 cpus {
795 cpu0: cpu@0 {
796 #cooling-cells = <2>;
797 };
798
799 cpu1: cpu@1 {
800 #cooling-cells = <2>;
801 };
802
803 cpu2: cpu@2 {
804 #cooling-cells = <2>;
805 };
806
807 cpu3: cpu@3 {
808 #cooling-cells = <2>;
809 };
810 };
811
812 thermal-zones {
813 cpu-skin-thermal {
814 polling-delay-passive = <1000>; /* milliseconds */
815 polling-delay = <5000>; /* milliseconds */
816
817 thermal-sensors = <&tmp451 0>;
818
819 trips {
820 cpu_passive_trip: cpu-alert0 {
821 /* throttle at 70C until temperature drops to 69.8C */
822 temperature = <70000>;
823 hysteresis = <200>;
824 type = "passive";
825 };
826 };
827
828 cooling-maps {
829 map0 {
830 trip = <&cpu_passive_trip>;
831 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
832 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
833 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
834 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
835 };
836 };
837 };
838 };
839};
840
841#include "cros-ec-keyboard.dtsi"
1#include <dt-bindings/input/input.h>
2#include "tegra124.dtsi"
3
4/ {
5 aliases {
6 rtc0 = "/i2c@7000d000/pmic@40";
7 rtc1 = "/rtc@7000e000";
8 serial0 = &uarta;
9 };
10
11 chosen {
12 stdout-path = "serial0:115200n8";
13 };
14
15 memory {
16 reg = <0x0 0x80000000 0x0 0x80000000>;
17 };
18
19 host1x@50000000 {
20 hdmi@54280000 {
21 status = "okay";
22
23 vdd-supply = <&vdd_3v3_hdmi>;
24 pll-supply = <&vdd_hdmi_pll>;
25 hdmi-supply = <&vdd_5v0_hdmi>;
26
27 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
28 nvidia,hpd-gpio =
29 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
30 };
31
32 sor@54540000 {
33 status = "okay";
34
35 nvidia,dpaux = <&dpaux>;
36 nvidia,panel = <&panel>;
37 };
38
39 dpaux@545c0000 {
40 vdd-supply = <&vdd_3v3_panel>;
41 status = "okay";
42 };
43 };
44
45 gpu@0,57000000 {
46 status = "okay";
47
48 vdd-supply = <&vdd_gpu>;
49 };
50
51 serial@70006000 {
52 /* Debug connector on the bottom of the board near SD card. */
53 status = "okay";
54 };
55
56 pwm@7000a000 {
57 status = "okay";
58 };
59
60 i2c@7000c000 {
61 status = "okay";
62 clock-frequency = <100000>;
63
64 acodec: audio-codec@10 {
65 compatible = "maxim,max98090";
66 reg = <0x10>;
67 interrupt-parent = <&gpio>;
68 interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
69 };
70
71 temperature-sensor@4c {
72 compatible = "ti,tmp451";
73 reg = <0x4c>;
74 interrupt-parent = <&gpio>;
75 interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
76
77 #thermal-sensor-cells = <1>;
78 };
79 };
80
81 i2c@7000c400 {
82 status = "okay";
83 clock-frequency = <100000>;
84
85 trackpad@15 {
86 compatible = "elan,ekth3000";
87 reg = <0x15>;
88 interrupt-parent = <&gpio>;
89 interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
90 wakeup-source;
91 };
92 };
93
94 i2c@7000c500 {
95 status = "okay";
96 clock-frequency = <400000>;
97
98 tpm@20 {
99 compatible = "infineon,slb9645tt";
100 reg = <0x20>;
101 };
102 };
103
104 hdmi_ddc: i2c@7000c700 {
105 status = "okay";
106 clock-frequency = <100000>;
107 };
108
109 i2c@7000d000 {
110 status = "okay";
111 clock-frequency = <400000>;
112
113 pmic: pmic@40 {
114 compatible = "ams,as3722";
115 reg = <0x40>;
116 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
117
118 ams,system-power-controller;
119
120 #interrupt-cells = <2>;
121 interrupt-controller;
122
123 gpio-controller;
124 #gpio-cells = <2>;
125
126 pinctrl-names = "default";
127 pinctrl-0 = <&as3722_default>;
128
129 as3722_default: pinmux {
130 gpio0 {
131 pins = "gpio0";
132 function = "gpio";
133 bias-pull-down;
134 };
135
136 gpio1 {
137 pins = "gpio1";
138 function = "gpio";
139 bias-pull-up;
140 };
141
142 gpio2_4_7 {
143 pins = "gpio2", "gpio4", "gpio7";
144 function = "gpio";
145 bias-pull-up;
146 };
147
148 gpio3_6 {
149 pins = "gpio3", "gpio6";
150 bias-high-impedance;
151 };
152
153 gpio5 {
154 pins = "gpio5";
155 function = "clk32k-out";
156 bias-pull-down;
157 };
158 };
159
160 regulators {
161 vsup-sd2-supply = <&vdd_5v0_sys>;
162 vsup-sd3-supply = <&vdd_5v0_sys>;
163 vsup-sd4-supply = <&vdd_5v0_sys>;
164 vsup-sd5-supply = <&vdd_5v0_sys>;
165 vin-ldo0-supply = <&vdd_1v35_lp0>;
166 vin-ldo1-6-supply = <&vdd_3v3_run>;
167 vin-ldo2-5-7-supply = <&vddio_1v8>;
168 vin-ldo3-4-supply = <&vdd_3v3_sys>;
169 vin-ldo9-10-supply = <&vdd_5v0_sys>;
170 vin-ldo11-supply = <&vdd_3v3_run>;
171
172 vdd_cpu: sd0 {
173 regulator-name = "+VDD_CPU_AP";
174 regulator-min-microvolt = <700000>;
175 regulator-max-microvolt = <1350000>;
176 regulator-min-microamp = <3500000>;
177 regulator-max-microamp = <3500000>;
178 regulator-always-on;
179 regulator-boot-on;
180 ams,ext-control = <2>;
181 };
182
183 sd1 {
184 regulator-name = "+VDD_CORE";
185 regulator-min-microvolt = <700000>;
186 regulator-max-microvolt = <1350000>;
187 regulator-min-microamp = <2500000>;
188 regulator-max-microamp = <4000000>;
189 regulator-always-on;
190 regulator-boot-on;
191 ams,ext-control = <1>;
192 };
193
194 vdd_1v35_lp0: sd2 {
195 regulator-name = "+1.35V_LP0(sd2)";
196 regulator-min-microvolt = <1350000>;
197 regulator-max-microvolt = <1350000>;
198 regulator-always-on;
199 regulator-boot-on;
200 };
201
202 sd3 {
203 regulator-name = "+1.35V_LP0(sd3)";
204 regulator-min-microvolt = <1350000>;
205 regulator-max-microvolt = <1350000>;
206 regulator-always-on;
207 regulator-boot-on;
208 };
209
210 vdd_1v05_run: sd4 {
211 regulator-name = "+1.05V_RUN";
212 regulator-min-microvolt = <1050000>;
213 regulator-max-microvolt = <1050000>;
214 };
215
216 vddio_1v8: sd5 {
217 regulator-name = "+1.8V_VDDIO";
218 regulator-min-microvolt = <1800000>;
219 regulator-max-microvolt = <1800000>;
220 regulator-always-on;
221 };
222
223 vdd_gpu: sd6 {
224 regulator-name = "+VDD_GPU_AP";
225 regulator-min-microvolt = <650000>;
226 regulator-max-microvolt = <1200000>;
227 regulator-min-microamp = <3500000>;
228 regulator-max-microamp = <3500000>;
229 regulator-boot-on;
230 regulator-always-on;
231 };
232
233 avdd_1v05_run: ldo0 {
234 regulator-name = "+1.05V_RUN_AVDD";
235 regulator-min-microvolt = <1050000>;
236 regulator-max-microvolt = <1050000>;
237 regulator-boot-on;
238 regulator-always-on;
239 ams,ext-control = <1>;
240 };
241
242 ldo1 {
243 regulator-name = "+1.8V_RUN_CAM";
244 regulator-min-microvolt = <1800000>;
245 regulator-max-microvolt = <1800000>;
246 };
247
248 ldo2 {
249 regulator-name = "+1.2V_GEN_AVDD";
250 regulator-min-microvolt = <1200000>;
251 regulator-max-microvolt = <1200000>;
252 regulator-boot-on;
253 regulator-always-on;
254 };
255
256 ldo3 {
257 regulator-name = "+1.00V_LP0_VDD_RTC";
258 regulator-min-microvolt = <1000000>;
259 regulator-max-microvolt = <1000000>;
260 regulator-boot-on;
261 regulator-always-on;
262 ams,enable-tracking;
263 };
264
265 vdd_run_cam: ldo4 {
266 regulator-name = "+3.3V_RUN_CAM";
267 regulator-min-microvolt = <2800000>;
268 regulator-max-microvolt = <2800000>;
269 };
270
271 ldo5 {
272 regulator-name = "+1.2V_RUN_CAM_FRONT";
273 regulator-min-microvolt = <1200000>;
274 regulator-max-microvolt = <1200000>;
275 };
276
277 vddio_sdmmc3: ldo6 {
278 regulator-name = "+VDDIO_SDMMC3";
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <3300000>;
281 };
282
283 ldo7 {
284 regulator-name = "+1.05V_RUN_CAM_REAR";
285 regulator-min-microvolt = <1050000>;
286 regulator-max-microvolt = <1050000>;
287 };
288
289 ldo9 {
290 regulator-name = "+2.8V_RUN_TOUCH";
291 regulator-min-microvolt = <2800000>;
292 regulator-max-microvolt = <2800000>;
293 };
294
295 ldo10 {
296 regulator-name = "+2.8V_RUN_CAM_AF";
297 regulator-min-microvolt = <2800000>;
298 regulator-max-microvolt = <2800000>;
299 };
300
301 ldo11 {
302 regulator-name = "+1.8V_RUN_VPP_FUSE";
303 regulator-min-microvolt = <1800000>;
304 regulator-max-microvolt = <1800000>;
305 };
306 };
307 };
308 };
309
310 spi@7000d400 {
311 status = "okay";
312
313 cros_ec: cros-ec@0 {
314 compatible = "google,cros-ec-spi";
315 spi-max-frequency = <3000000>;
316 interrupt-parent = <&gpio>;
317 interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
318 reg = <0>;
319
320 google,cros-ec-spi-msg-delay = <2000>;
321
322 i2c-tunnel {
323 compatible = "google,cros-ec-i2c-tunnel";
324 #address-cells = <1>;
325 #size-cells = <0>;
326
327 google,remote-bus = <0>;
328
329 charger: bq24735@9 {
330 compatible = "ti,bq24735";
331 reg = <0x9>;
332 interrupt-parent = <&gpio>;
333 interrupts = <TEGRA_GPIO(J, 0)
334 GPIO_ACTIVE_HIGH>;
335 ti,ac-detect-gpios = <&gpio
336 TEGRA_GPIO(J, 0)
337 GPIO_ACTIVE_HIGH>;
338 };
339
340 battery: sbs-battery@b {
341 compatible = "sbs,sbs-battery";
342 reg = <0xb>;
343 sbs,i2c-retry-count = <2>;
344 sbs,poll-retry-count = <10>;
345 power-supplies = <&charger>;
346 };
347 };
348 };
349 };
350
351 spi@7000da00 {
352 status = "okay";
353 spi-max-frequency = <25000000>;
354
355 flash@0 {
356 compatible = "winbond,w25q32dw";
357 spi-max-frequency = <25000000>;
358 reg = <0>;
359 };
360 };
361
362 pmc@7000e400 {
363 nvidia,invert-interrupt;
364 nvidia,suspend-mode = <0>;
365 nvidia,cpu-pwr-good-time = <500>;
366 nvidia,cpu-pwr-off-time = <300>;
367 nvidia,core-pwr-good-time = <641 3845>;
368 nvidia,core-pwr-off-time = <61036>;
369 nvidia,core-power-req-active-high;
370 nvidia,sys-clock-req-active-high;
371 };
372
373 hda@70030000 {
374 status = "okay";
375 };
376
377 usb@70090000 {
378 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
379 <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
380 <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
381 <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
382 <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
383 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
384
385 avddio-pex-supply = <&vdd_1v05_run>;
386 dvddio-pex-supply = <&vdd_1v05_run>;
387 avdd-usb-supply = <&vdd_3v3_lp0>;
388 avdd-pll-utmip-supply = <&vddio_1v8>;
389 avdd-pll-erefe-supply = <&avdd_1v05_run>;
390 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
391 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
392 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
393
394 status = "okay";
395 };
396
397 padctl@7009f000 {
398 status = "okay";
399
400 pads {
401 usb2 {
402 status = "okay";
403
404 lanes {
405 usb2-0 {
406 nvidia,function = "xusb";
407 status = "okay";
408 };
409
410 usb2-1 {
411 nvidia,function = "xusb";
412 status = "okay";
413 };
414
415 usb2-2 {
416 nvidia,function = "xusb";
417 status = "okay";
418 };
419 };
420 };
421
422 pcie {
423 status = "okay";
424
425 lanes {
426 pcie-0 {
427 nvidia,function = "usb3-ss";
428 status = "okay";
429 };
430
431 pcie-1 {
432 nvidia,function = "usb3-ss";
433 status = "okay";
434 };
435 };
436 };
437 };
438
439 ports {
440 usb2-0 {
441 vbus-supply = <&vdd_usb1_vbus>;
442 status = "okay";
443 mode = "otg";
444 };
445
446 usb2-1 {
447 vbus-supply = <&vdd_run_cam>;
448 status = "okay";
449 mode = "host";
450 };
451
452 usb2-2 {
453 vbus-supply = <&vdd_usb3_vbus>;
454 status = "okay";
455 mode = "host";
456 };
457
458 usb3-0 {
459 nvidia,usb2-companion = <0>;
460 status = "okay";
461 };
462
463 usb3-1 {
464 nvidia,usb2-companion = <1>;
465 status = "okay";
466 };
467 };
468 };
469
470 sdhci0_pwrseq: sdhci0_pwrseq {
471 compatible = "mmc-pwrseq-simple";
472
473 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
474 };
475
476 sdhci@700b0000 { /* WiFi/BT on this bus */
477 status = "okay";
478 bus-width = <4>;
479 no-1-8-v;
480 non-removable;
481 mmc-pwrseq = <&sdhci0_pwrseq>;
482 vmmc-supply = <&vdd_3v3_lp0>;
483 vqmmc-supply = <&vddio_1v8>;
484 keep-power-in-suspend;
485 };
486
487 sdhci@700b0400 { /* SD Card on this bus */
488 status = "okay";
489 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
490 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
491 bus-width = <4>;
492 no-1-8-v;
493 vqmmc-supply = <&vddio_sdmmc3>;
494 };
495
496 sdhci@700b0600 { /* eMMC on this bus */
497 status = "okay";
498 bus-width = <8>;
499 no-1-8-v;
500 non-removable;
501 };
502
503 /* CPU DFLL clock */
504 clock@70110000 {
505 status = "disabled";
506 vdd-cpu-supply = <&vdd_cpu>;
507 nvidia,i2c-fs-rate = <400000>;
508 };
509
510 ahub@70300000 {
511 i2s@70301100 {
512 status = "okay";
513 };
514 };
515
516 backlight: backlight {
517 compatible = "pwm-backlight";
518
519 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
520 power-supply = <&vdd_led>;
521 pwms = <&pwm 1 1000000>;
522
523 default-brightness-level = <224>;
524 brightness-levels =
525 < 0 1 2 3 4 5 6 7
526 8 9 10 11 12 13 14 15
527 16 17 18 19 20 21 22 23
528 24 25 26 27 28 29 30 31
529 32 33 34 35 36 37 38 39
530 40 41 42 43 44 45 46 47
531 48 49 50 51 52 53 54 55
532 56 57 58 59 60 61 62 63
533 64 65 66 67 68 69 70 71
534 72 73 74 75 76 77 78 79
535 80 81 82 83 84 85 86 87
536 88 89 90 91 92 93 94 95
537 96 97 98 99 100 101 102 103
538 104 105 106 107 108 109 110 111
539 112 113 114 115 116 117 118 119
540 120 121 122 123 124 125 126 127
541 128 129 130 131 132 133 134 135
542 136 137 138 139 140 141 142 143
543 144 145 146 147 148 149 150 151
544 152 153 154 155 156 157 158 159
545 160 161 162 163 164 165 166 167
546 168 169 170 171 172 173 174 175
547 176 177 178 179 180 181 182 183
548 184 185 186 187 188 189 190 191
549 192 193 194 195 196 197 198 199
550 200 201 202 203 204 205 206 207
551 208 209 210 211 212 213 214 215
552 216 217 218 219 220 221 222 223
553 224 225 226 227 228 229 230 231
554 232 233 234 235 236 237 238 239
555 240 241 242 243 244 245 246 247
556 248 249 250 251 252 253 254 255
557 256>;
558 };
559
560 clocks {
561 compatible = "simple-bus";
562 #address-cells = <1>;
563 #size-cells = <0>;
564
565 clk32k_in: clock@0 {
566 compatible = "fixed-clock";
567 reg = <0>;
568 #clock-cells = <0>;
569 clock-frequency = <32768>;
570 };
571 };
572
573 cpus {
574 cpu@0 {
575 vdd-cpu-supply = <&vdd_cpu>;
576 };
577 };
578
579 gpio-keys {
580 compatible = "gpio-keys";
581
582 lid {
583 label = "Lid";
584 gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
585 linux,input-type = <5>;
586 linux,code = <KEY_RESERVED>;
587 debounce-interval = <1>;
588 wakeup-source;
589 };
590
591 power {
592 label = "Power";
593 gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
594 linux,code = <KEY_POWER>;
595 debounce-interval = <30>;
596 wakeup-source;
597 };
598 };
599
600 regulators {
601 compatible = "simple-bus";
602 #address-cells = <1>;
603 #size-cells = <0>;
604
605 vdd_mux: regulator@0 {
606 compatible = "regulator-fixed";
607 reg = <0>;
608 regulator-name = "+VDD_MUX";
609 regulator-min-microvolt = <12000000>;
610 regulator-max-microvolt = <12000000>;
611 regulator-always-on;
612 regulator-boot-on;
613 };
614
615 vdd_5v0_sys: regulator@1 {
616 compatible = "regulator-fixed";
617 reg = <1>;
618 regulator-name = "+5V_SYS";
619 regulator-min-microvolt = <5000000>;
620 regulator-max-microvolt = <5000000>;
621 regulator-always-on;
622 regulator-boot-on;
623 vin-supply = <&vdd_mux>;
624 };
625
626 vdd_3v3_sys: regulator@2 {
627 compatible = "regulator-fixed";
628 reg = <2>;
629 regulator-name = "+3.3V_SYS";
630 regulator-min-microvolt = <3300000>;
631 regulator-max-microvolt = <3300000>;
632 regulator-always-on;
633 regulator-boot-on;
634 vin-supply = <&vdd_mux>;
635 };
636
637 vdd_3v3_run: regulator@3 {
638 compatible = "regulator-fixed";
639 reg = <3>;
640 regulator-name = "+3.3V_RUN";
641 regulator-min-microvolt = <3300000>;
642 regulator-max-microvolt = <3300000>;
643 regulator-always-on;
644 regulator-boot-on;
645 gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
646 enable-active-high;
647 vin-supply = <&vdd_3v3_sys>;
648 };
649
650 vdd_3v3_hdmi: regulator@4 {
651 compatible = "regulator-fixed";
652 reg = <4>;
653 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
654 regulator-min-microvolt = <3300000>;
655 regulator-max-microvolt = <3300000>;
656 vin-supply = <&vdd_3v3_run>;
657 };
658
659 vdd_led: regulator@5 {
660 compatible = "regulator-fixed";
661 reg = <5>;
662 regulator-name = "+VDD_LED";
663 gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
664 enable-active-high;
665 vin-supply = <&vdd_mux>;
666 };
667
668 vdd_5v0_ts: regulator@6 {
669 compatible = "regulator-fixed";
670 reg = <6>;
671 regulator-name = "+5V_VDD_TS_SW";
672 regulator-min-microvolt = <5000000>;
673 regulator-max-microvolt = <5000000>;
674 regulator-boot-on;
675 gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
676 enable-active-high;
677 vin-supply = <&vdd_5v0_sys>;
678 };
679
680 vdd_usb1_vbus: regulator@7 {
681 compatible = "regulator-fixed";
682 reg = <7>;
683 regulator-name = "+5V_USB_HS";
684 regulator-min-microvolt = <5000000>;
685 regulator-max-microvolt = <5000000>;
686 gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
687 enable-active-high;
688 gpio-open-drain;
689 vin-supply = <&vdd_5v0_sys>;
690 };
691
692 vdd_usb3_vbus: regulator@8 {
693 compatible = "regulator-fixed";
694 reg = <8>;
695 regulator-name = "+5V_USB_SS";
696 regulator-min-microvolt = <5000000>;
697 regulator-max-microvolt = <5000000>;
698 gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
699 enable-active-high;
700 gpio-open-drain;
701 vin-supply = <&vdd_5v0_sys>;
702 };
703
704 vdd_3v3_panel: regulator@9 {
705 compatible = "regulator-fixed";
706 reg = <9>;
707 regulator-name = "+3.3V_PANEL";
708 regulator-min-microvolt = <3300000>;
709 regulator-max-microvolt = <3300000>;
710 gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
711 enable-active-high;
712 vin-supply = <&vdd_3v3_run>;
713 };
714
715 vdd_3v3_lp0: regulator@10 {
716 compatible = "regulator-fixed";
717 reg = <10>;
718 regulator-name = "+3.3V_LP0";
719 regulator-min-microvolt = <3300000>;
720 regulator-max-microvolt = <3300000>;
721 /*
722 * TODO: find a way to wire this up with the USB EHCI
723 * controllers so that it can be enabled on demand.
724 */
725 regulator-always-on;
726 gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
727 enable-active-high;
728 vin-supply = <&vdd_3v3_sys>;
729 };
730
731 vdd_hdmi_pll: regulator@11 {
732 compatible = "regulator-fixed";
733 reg = <11>;
734 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
735 regulator-min-microvolt = <1050000>;
736 regulator-max-microvolt = <1050000>;
737 gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
738 vin-supply = <&vdd_1v05_run>;
739 };
740
741 vdd_5v0_hdmi: regulator@12 {
742 compatible = "regulator-fixed";
743 reg = <12>;
744 regulator-name = "+5V_HDMI_CON";
745 regulator-min-microvolt = <5000000>;
746 regulator-max-microvolt = <5000000>;
747 gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
748 enable-active-high;
749 vin-supply = <&vdd_5v0_sys>;
750 };
751 };
752
753 sound {
754 nvidia,audio-routing =
755 "Headphones", "HPR",
756 "Headphones", "HPL",
757 "Speakers", "SPKR",
758 "Speakers", "SPKL",
759 "Mic Jack", "MICBIAS",
760 "DMICL", "Int Mic",
761 "DMICR", "Int Mic",
762 "IN34", "Mic Jack";
763
764 nvidia,i2s-controller = <&tegra_i2s1>;
765 nvidia,audio-codec = <&acodec>;
766
767 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
768 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
769 <&tegra_car TEGRA124_CLK_EXTERN1>;
770 clock-names = "pll_a", "pll_a_out0", "mclk";
771
772 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
773 nvidia,mic-det-gpios =
774 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
775 };
776
777 gpio-restart {
778 compatible = "gpio-restart";
779 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
780 priority = <200>;
781 };
782};
783
784#include "cros-ec-keyboard.dtsi"