Linux Audio

Check our new training course

Loading...
v6.2
 1// SPDX-License-Identifier: GPL-2.0
 2/*
 3 * Google Veyron (and derivatives) fragment for the  max98090 audio
 4 * codec and analog headphone jack.
 5 *
 6 * Copyright 2016 Google, Inc
 
 
 
 
 7 */
 8
 9/ {
10	sound {
11		compatible = "rockchip,rockchip-audio-max98090";
12		pinctrl-names = "default";
13		pinctrl-0 = <&mic_det>, <&hp_det>;
14		rockchip,model = "VEYRON-I2S";
15		rockchip,i2s-controller = <&i2s>;
16		rockchip,audio-codec = <&max98090>;
17		rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>;
18		rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>;
19		rockchip,headset-codec = <&headsetcodec>;
20		rockchip,hdmi-codec = <&hdmi>;
21	};
22};
23
24&i2c2 {
25	max98090: max98090@10 {
26		compatible = "maxim,max98090";
27		reg = <0x10>;
28		interrupt-parent = <&gpio6>;
29		interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>;
30		clock-names = "mclk";
31		clocks = <&cru SCLK_I2S0_OUT>;
32		pinctrl-names = "default";
33		pinctrl-0 = <&int_codec>;
34	};
35};
36
37&i2c4 {
38	headsetcodec: ts3a227e@3b {
39		compatible = "ti,ts3a227e";
40		reg = <0x3b>;
41		interrupt-parent = <&gpio0>;
42		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
43		pinctrl-names = "default";
44		pinctrl-0 = <&ts3a227e_int_l>;
45		ti,micbias = <7>;		/* MICBIAS = 2.8V */
46	};
47};
48
49&i2s {
50	status = "okay";
51};
52
53&io_domains {
54	audio-supply = <&vcc18_codec>;
55};
56
57&rk808 {
58	vcc10-supply = <&vcc33_sys>;
59
60	regulators {
61		vcc18_codec: LDO_REG6 {
62			regulator-name = "vcc18_codec";
63			regulator-always-on;
64			regulator-boot-on;
65			regulator-min-microvolt = <1800000>;
66			regulator-max-microvolt = <1800000>;
67			regulator-state-mem {
68				regulator-off-in-suspend;
69			};
70		};
71	};
72};
73
74&pinctrl {
75	codec {
76		hp_det: hp-det {
77			rockchip,pins = <6 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
78		};
79
80		/*
81		 * HACK: We're going to _pull down_ this _active low_ interrupt
82		 * so that it never fires.  We don't need this interrupt because
83		 * we've got a ts3a227e chip but the driver requires it.
84		 */
85		int_codec: int-codec {
86			rockchip,pins = <6 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
87		};
88
89		mic_det: mic-det {
90			rockchip,pins = <6 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
91		};
92	};
93
94	headset {
95		ts3a227e_int_l: ts3a227e-int-l {
96			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
97		};
98	};
99};
v4.10.11
 
  1/*
  2 * Google Veyron (and derivatives) fragment for the  max98090 audio
  3 * codec and analog headphone jack.
  4 *
  5 * Copyright 2016 Google, Inc
  6 *
  7 * This program is free software; you can redistribute it and/or modify
  8 * it under the terms of the GNU General Public License version 2 as
  9 * published by the Free Software Foundation.
 10 */
 11
 12/ {
 13	sound {
 14		compatible = "rockchip,rockchip-audio-max98090";
 15		pinctrl-names = "default";
 16		pinctrl-0 = <&mic_det>, <&hp_det>;
 17		rockchip,model = "VEYRON-I2S";
 18		rockchip,i2s-controller = <&i2s>;
 19		rockchip,audio-codec = <&max98090>;
 20		rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
 21		rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 22		rockchip,headset-codec = <&headsetcodec>;
 
 23	};
 24};
 25
 26&i2c2 {
 27	max98090: max98090@10 {
 28		compatible = "maxim,max98090";
 29		reg = <0x10>;
 30		interrupt-parent = <&gpio6>;
 31		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 32		clock-names = "mclk";
 33		clocks = <&cru SCLK_I2S0_OUT>;
 34		pinctrl-names = "default";
 35		pinctrl-0 = <&int_codec>;
 36	};
 37};
 38
 39&i2c4 {
 40	headsetcodec: ts3a227e@3b {
 41		compatible = "ti,ts3a227e";
 42		reg = <0x3b>;
 43		interrupt-parent = <&gpio0>;
 44		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 45		pinctrl-names = "default";
 46		pinctrl-0 = <&ts3a227e_int_l>;
 47		ti,micbias = <7>;		/* MICBIAS = 2.8V */
 48	};
 49};
 50
 51&i2s {
 52	status = "okay";
 53};
 54
 55&io_domains {
 56	audio-supply = <&vcc18_codec>;
 57};
 58
 59&rk808 {
 60	vcc10-supply = <&vcc33_sys>;
 61
 62	regulators {
 63		vcc18_codec: LDO_REG6 {
 64			regulator-name = "vcc18_codec";
 65			regulator-always-on;
 66			regulator-boot-on;
 67			regulator-min-microvolt = <1800000>;
 68			regulator-max-microvolt = <1800000>;
 69			regulator-state-mem {
 70				regulator-off-in-suspend;
 71			};
 72		};
 73	};
 74};
 75
 76&pinctrl {
 77	codec {
 78		hp_det: hp-det {
 79			rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
 80		};
 81
 82		/*
 83		 * HACK: We're going to _pull down_ this _active low_ interrupt
 84		 * so that it never fires.  We don't need this interrupt because
 85		 * we've got a ts3a227e chip but the driver requires it.
 86		 */
 87		int_codec: int-codec {
 88			rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>;
 89		};
 90
 91		mic_det: mic-det {
 92			rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
 93		};
 94	};
 95
 96	headset {
 97		ts3a227e_int_l: ts3a227e-int-l {
 98			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
 99		};
100	};
101};