Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3#include <dt-bindings/gpio/gpio.h>
4#include <dt-bindings/interrupt-controller/irq.h>
5#include <dt-bindings/interrupt-controller/arm-gic.h>
6#include <dt-bindings/pinctrl/rockchip.h>
7#include <dt-bindings/clock/rk3036-cru.h>
8#include <dt-bindings/soc/rockchip,boot-mode.h>
9#include <dt-bindings/power/rk3036-power.h>
10
11/ {
12 #address-cells = <1>;
13 #size-cells = <1>;
14
15 compatible = "rockchip,rk3036";
16
17 interrupt-parent = <&gic>;
18
19 aliases {
20 i2c0 = &i2c0;
21 i2c1 = &i2c1;
22 i2c2 = &i2c2;
23 mshc0 = &emmc;
24 mshc1 = &sdmmc;
25 mshc2 = &sdio;
26 serial0 = &uart0;
27 serial1 = &uart1;
28 serial2 = &uart2;
29 spi = &spi;
30 };
31
32 cpus {
33 #address-cells = <1>;
34 #size-cells = <0>;
35 enable-method = "rockchip,rk3036-smp";
36
37 cpu0: cpu@f00 {
38 device_type = "cpu";
39 compatible = "arm,cortex-a7";
40 reg = <0xf00>;
41 resets = <&cru SRST_CORE0>;
42 operating-points = <
43 /* KHz uV */
44 816000 1000000
45 >;
46 clock-latency = <40000>;
47 clocks = <&cru ARMCLK>;
48 };
49
50 cpu1: cpu@f01 {
51 device_type = "cpu";
52 compatible = "arm,cortex-a7";
53 reg = <0xf01>;
54 resets = <&cru SRST_CORE1>;
55 };
56 };
57
58 arm-pmu {
59 compatible = "arm,cortex-a7-pmu";
60 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
61 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
62 interrupt-affinity = <&cpu0>, <&cpu1>;
63 };
64
65 display-subsystem {
66 compatible = "rockchip,display-subsystem";
67 ports = <&vop_out>;
68 };
69
70 timer {
71 compatible = "arm,armv7-timer";
72 arm,cpu-registers-not-fw-configured;
73 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
74 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
75 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
76 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
77 clock-frequency = <24000000>;
78 };
79
80 xin24m: oscillator {
81 compatible = "fixed-clock";
82 clock-frequency = <24000000>;
83 clock-output-names = "xin24m";
84 #clock-cells = <0>;
85 };
86
87 bus_intmem: sram@10080000 {
88 compatible = "mmio-sram";
89 reg = <0x10080000 0x2000>;
90 #address-cells = <1>;
91 #size-cells = <1>;
92 ranges = <0 0x10080000 0x2000>;
93
94 smp-sram@0 {
95 compatible = "rockchip,rk3066-smp-sram";
96 reg = <0x00 0x10>;
97 };
98 };
99
100 gpu: gpu@10090000 {
101 compatible = "rockchip,rk3036-mali", "arm,mali-400";
102 reg = <0x10090000 0x10000>;
103 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
104 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
105 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
106 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
107 interrupt-names = "gp",
108 "gpmmu",
109 "pp0",
110 "ppmmu0";
111 assigned-clocks = <&cru SCLK_GPU>;
112 assigned-clock-rates = <100000000>;
113 clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
114 clock-names = "bus", "core";
115 power-domains = <&power RK3036_PD_GPU>;
116 resets = <&cru SRST_GPU>;
117 status = "disabled";
118 };
119
120 vpu: video-codec@10108000 {
121 compatible = "rockchip,rk3036-vpu";
122 reg = <0x10108000 0x800>;
123 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
124 interrupt-names = "vdpu";
125 clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
126 clock-names = "aclk", "hclk";
127 iommus = <&vpu_mmu>;
128 power-domains = <&power RK3036_PD_VPU>;
129 };
130
131 vpu_mmu: iommu@10108800 {
132 compatible = "rockchip,iommu";
133 reg = <0x10108800 0x100>;
134 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
135 clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
136 clock-names = "aclk", "iface";
137 power-domains = <&power RK3036_PD_VPU>;
138 #iommu-cells = <0>;
139 };
140
141 vop: vop@10118000 {
142 compatible = "rockchip,rk3036-vop";
143 reg = <0x10118000 0x19c>;
144 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
145 clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
146 clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
147 resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
148 reset-names = "axi", "ahb", "dclk";
149 iommus = <&vop_mmu>;
150 power-domains = <&power RK3036_PD_VIO>;
151 status = "disabled";
152
153 vop_out: port {
154 #address-cells = <1>;
155 #size-cells = <0>;
156 vop_out_hdmi: endpoint@0 {
157 reg = <0>;
158 remote-endpoint = <&hdmi_in_vop>;
159 };
160 };
161 };
162
163 vop_mmu: iommu@10118300 {
164 compatible = "rockchip,iommu";
165 reg = <0x10118300 0x100>;
166 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
167 clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
168 clock-names = "aclk", "iface";
169 power-domains = <&power RK3036_PD_VIO>;
170 #iommu-cells = <0>;
171 status = "disabled";
172 };
173
174 qos_gpu: qos@1012d000 {
175 compatible = "rockchip,rk3036-qos", "syscon";
176 reg = <0x1012d000 0x20>;
177 };
178
179 qos_vpu: qos@1012e000 {
180 compatible = "rockchip,rk3036-qos", "syscon";
181 reg = <0x1012e000 0x20>;
182 };
183
184 qos_vio: qos@1012f000 {
185 compatible = "rockchip,rk3036-qos", "syscon";
186 reg = <0x1012f000 0x20>;
187 };
188
189 gic: interrupt-controller@10139000 {
190 compatible = "arm,gic-400";
191 interrupt-controller;
192 #interrupt-cells = <3>;
193 #address-cells = <0>;
194
195 reg = <0x10139000 0x1000>,
196 <0x1013a000 0x2000>,
197 <0x1013c000 0x2000>,
198 <0x1013e000 0x2000>;
199 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
200 };
201
202 usb_otg: usb@10180000 {
203 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
204 "snps,dwc2";
205 reg = <0x10180000 0x40000>;
206 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
207 clocks = <&cru HCLK_OTG0>;
208 clock-names = "otg";
209 dr_mode = "otg";
210 g-np-tx-fifo-size = <16>;
211 g-rx-fifo-size = <275>;
212 g-tx-fifo-size = <256 128 128 64 64 32>;
213 status = "disabled";
214 };
215
216 usb_host: usb@101c0000 {
217 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
218 "snps,dwc2";
219 reg = <0x101c0000 0x40000>;
220 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
221 clocks = <&cru HCLK_OTG1>;
222 clock-names = "otg";
223 dr_mode = "host";
224 status = "disabled";
225 };
226
227 emac: ethernet@10200000 {
228 compatible = "rockchip,rk3036-emac";
229 reg = <0x10200000 0x4000>;
230 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
231 rockchip,grf = <&grf>;
232 clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
233 clock-names = "hclk", "macref", "macclk";
234 /*
235 * Fix the emac parent clock is DPLL instead of APLL.
236 * since that will cause some unstable things if the cpufreq
237 * is working. (e.g: the accurate 50MHz what mac_ref need)
238 */
239 assigned-clocks = <&cru SCLK_MACPLL>;
240 assigned-clock-parents = <&cru PLL_DPLL>;
241 max-speed = <100>;
242 phy-mode = "rmii";
243 status = "disabled";
244 };
245
246 sdmmc: mmc@10214000 {
247 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
248 reg = <0x10214000 0x4000>;
249 clock-frequency = <37500000>;
250 max-frequency = <37500000>;
251 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
252 clock-names = "biu", "ciu";
253 fifo-depth = <0x100>;
254 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
255 resets = <&cru SRST_MMC0>;
256 reset-names = "reset";
257 status = "disabled";
258 };
259
260 sdio: mmc@10218000 {
261 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
262 reg = <0x10218000 0x4000>;
263 max-frequency = <37500000>;
264 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
265 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
266 clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
267 fifo-depth = <0x100>;
268 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
269 resets = <&cru SRST_SDIO>;
270 reset-names = "reset";
271 status = "disabled";
272 };
273
274 emmc: mmc@1021c000 {
275 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
276 reg = <0x1021c000 0x4000>;
277 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
278 bus-width = <8>;
279 cap-mmc-highspeed;
280 clock-frequency = <37500000>;
281 max-frequency = <37500000>;
282 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
283 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
284 clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
285 rockchip,default-sample-phase = <158>;
286 disable-wp;
287 dmas = <&pdma 12>;
288 dma-names = "rx-tx";
289 fifo-depth = <0x100>;
290 mmc-ddr-1_8v;
291 non-removable;
292 pinctrl-names = "default";
293 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
294 resets = <&cru SRST_EMMC>;
295 reset-names = "reset";
296 status = "disabled";
297 };
298
299 i2s: i2s@10220000 {
300 compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
301 reg = <0x10220000 0x4000>;
302 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
303 clock-names = "i2s_clk", "i2s_hclk";
304 clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
305 dmas = <&pdma 0>, <&pdma 1>;
306 dma-names = "tx", "rx";
307 pinctrl-names = "default";
308 pinctrl-0 = <&i2s_bus>;
309 #sound-dai-cells = <0>;
310 status = "disabled";
311 };
312
313 nfc: nand-controller@10500000 {
314 compatible = "rockchip,rk3036-nfc",
315 "rockchip,rk2928-nfc";
316 reg = <0x10500000 0x4000>;
317 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
318 clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
319 clock-names = "ahb", "nfc";
320 assigned-clocks = <&cru SCLK_NANDC>;
321 assigned-clock-rates = <150000000>;
322 pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
323 &flash_rdn &flash_rdy &flash_wrn>;
324 pinctrl-names = "default";
325 status = "disabled";
326 };
327
328 cru: clock-controller@20000000 {
329 compatible = "rockchip,rk3036-cru";
330 reg = <0x20000000 0x1000>;
331 clocks = <&xin24m>;
332 clock-names = "xin24m";
333 rockchip,grf = <&grf>;
334 #clock-cells = <1>;
335 #reset-cells = <1>;
336 assigned-clocks = <&cru PLL_GPLL>;
337 assigned-clock-rates = <594000000>;
338 };
339
340 grf: syscon@20008000 {
341 compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
342 reg = <0x20008000 0x1000>;
343
344 power: power-controller {
345 compatible = "rockchip,rk3036-power-controller";
346 #power-domain-cells = <1>;
347 #address-cells = <1>;
348 #size-cells = <0>;
349
350 power-domain@RK3036_PD_VIO {
351 reg = <RK3036_PD_VIO>;
352 clocks = <&cru ACLK_LCDC>,
353 <&cru HCLK_LCDC>,
354 <&cru SCLK_LCDC>;
355 pm_qos = <&qos_vio>;
356 #power-domain-cells = <0>;
357 };
358
359 power-domain@RK3036_PD_VPU {
360 reg = <RK3036_PD_VPU>;
361 clocks = <&cru ACLK_VCODEC>,
362 <&cru HCLK_VCODEC>;
363 pm_qos = <&qos_vpu>;
364 #power-domain-cells = <0>;
365 };
366
367 power-domain@RK3036_PD_GPU {
368 reg = <RK3036_PD_GPU>;
369 clocks = <&cru SCLK_GPU>;
370 pm_qos = <&qos_gpu>;
371 #power-domain-cells = <0>;
372 };
373 };
374
375 reboot-mode {
376 compatible = "syscon-reboot-mode";
377 offset = <0x1d8>;
378 mode-normal = <BOOT_NORMAL>;
379 mode-recovery = <BOOT_RECOVERY>;
380 mode-bootloader = <BOOT_FASTBOOT>;
381 mode-loader = <BOOT_BL_DOWNLOAD>;
382 };
383 };
384
385 acodec: acodec-ana@20030000 {
386 compatible = "rk3036-codec";
387 reg = <0x20030000 0x4000>;
388 rockchip,grf = <&grf>;
389 clock-names = "acodec_pclk";
390 clocks = <&cru PCLK_ACODEC>;
391 status = "disabled";
392 };
393
394 hdmi: hdmi@20034000 {
395 compatible = "rockchip,rk3036-inno-hdmi";
396 reg = <0x20034000 0x4000>;
397 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
398 clocks = <&cru PCLK_HDMI>;
399 clock-names = "pclk";
400 rockchip,grf = <&grf>;
401 pinctrl-names = "default";
402 pinctrl-0 = <&hdmi_ctl>;
403 status = "disabled";
404
405 hdmi_in: port {
406 #address-cells = <1>;
407 #size-cells = <0>;
408 hdmi_in_vop: endpoint@0 {
409 reg = <0>;
410 remote-endpoint = <&vop_out_hdmi>;
411 };
412 };
413 };
414
415 timer: timer@20044000 {
416 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
417 reg = <0x20044000 0x20>;
418 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
419 clocks = <&cru PCLK_TIMER>, <&xin24m>;
420 clock-names = "pclk", "timer";
421 };
422
423 pwm0: pwm@20050000 {
424 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
425 reg = <0x20050000 0x10>;
426 #pwm-cells = <3>;
427 clocks = <&cru PCLK_PWM>;
428 pinctrl-names = "default";
429 pinctrl-0 = <&pwm0_pin>;
430 status = "disabled";
431 };
432
433 pwm1: pwm@20050010 {
434 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
435 reg = <0x20050010 0x10>;
436 #pwm-cells = <3>;
437 clocks = <&cru PCLK_PWM>;
438 pinctrl-names = "default";
439 pinctrl-0 = <&pwm1_pin>;
440 status = "disabled";
441 };
442
443 pwm2: pwm@20050020 {
444 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
445 reg = <0x20050020 0x10>;
446 #pwm-cells = <3>;
447 clocks = <&cru PCLK_PWM>;
448 pinctrl-names = "default";
449 pinctrl-0 = <&pwm2_pin>;
450 status = "disabled";
451 };
452
453 pwm3: pwm@20050030 {
454 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
455 reg = <0x20050030 0x10>;
456 #pwm-cells = <2>;
457 clocks = <&cru PCLK_PWM>;
458 pinctrl-names = "default";
459 pinctrl-0 = <&pwm3_pin>;
460 status = "disabled";
461 };
462
463 i2c1: i2c@20056000 {
464 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
465 reg = <0x20056000 0x1000>;
466 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
467 #address-cells = <1>;
468 #size-cells = <0>;
469 clock-names = "i2c";
470 clocks = <&cru PCLK_I2C1>;
471 pinctrl-names = "default";
472 pinctrl-0 = <&i2c1_xfer>;
473 status = "disabled";
474 };
475
476 i2c2: i2c@2005a000 {
477 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
478 reg = <0x2005a000 0x1000>;
479 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
480 #address-cells = <1>;
481 #size-cells = <0>;
482 clock-names = "i2c";
483 clocks = <&cru PCLK_I2C2>;
484 pinctrl-names = "default";
485 pinctrl-0 = <&i2c2_xfer>;
486 status = "disabled";
487 };
488
489 uart0: serial@20060000 {
490 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
491 reg = <0x20060000 0x100>;
492 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
493 reg-shift = <2>;
494 reg-io-width = <4>;
495 clock-frequency = <24000000>;
496 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
497 clock-names = "baudclk", "apb_pclk";
498 pinctrl-names = "default";
499 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
500 status = "disabled";
501 };
502
503 uart1: serial@20064000 {
504 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
505 reg = <0x20064000 0x100>;
506 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
507 reg-shift = <2>;
508 reg-io-width = <4>;
509 clock-frequency = <24000000>;
510 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
511 clock-names = "baudclk", "apb_pclk";
512 pinctrl-names = "default";
513 pinctrl-0 = <&uart1_xfer>;
514 status = "disabled";
515 };
516
517 uart2: serial@20068000 {
518 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
519 reg = <0x20068000 0x100>;
520 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
521 reg-shift = <2>;
522 reg-io-width = <4>;
523 clock-frequency = <24000000>;
524 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
525 clock-names = "baudclk", "apb_pclk";
526 pinctrl-names = "default";
527 pinctrl-0 = <&uart2_xfer>;
528 status = "disabled";
529 };
530
531 i2c0: i2c@20072000 {
532 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
533 reg = <0x20072000 0x1000>;
534 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
535 #address-cells = <1>;
536 #size-cells = <0>;
537 clock-names = "i2c";
538 clocks = <&cru PCLK_I2C0>;
539 pinctrl-names = "default";
540 pinctrl-0 = <&i2c0_xfer>;
541 status = "disabled";
542 };
543
544 spi: spi@20074000 {
545 compatible = "rockchip,rockchip-spi";
546 reg = <0x20074000 0x1000>;
547 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
548 clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
549 clock-names = "apb-pclk","spi_pclk";
550 dmas = <&pdma 8>, <&pdma 9>;
551 dma-names = "tx", "rx";
552 pinctrl-names = "default";
553 pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
554 #address-cells = <1>;
555 #size-cells = <0>;
556 status = "disabled";
557 };
558
559 pdma: dma-controller@20078000 {
560 compatible = "arm,pl330", "arm,primecell";
561 reg = <0x20078000 0x4000>;
562 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
563 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
564 #dma-cells = <1>;
565 arm,pl330-broken-no-flushp;
566 arm,pl330-periph-burst;
567 clocks = <&cru ACLK_DMAC2>;
568 clock-names = "apb_pclk";
569 };
570
571 pinctrl: pinctrl {
572 compatible = "rockchip,rk3036-pinctrl";
573 rockchip,grf = <&grf>;
574 #address-cells = <1>;
575 #size-cells = <1>;
576 ranges;
577
578 gpio0: gpio@2007c000 {
579 compatible = "rockchip,gpio-bank";
580 reg = <0x2007c000 0x100>;
581 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
582 clocks = <&cru PCLK_GPIO0>;
583
584 gpio-controller;
585 #gpio-cells = <2>;
586
587 interrupt-controller;
588 #interrupt-cells = <2>;
589 };
590
591 gpio1: gpio@20080000 {
592 compatible = "rockchip,gpio-bank";
593 reg = <0x20080000 0x100>;
594 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
595 clocks = <&cru PCLK_GPIO1>;
596
597 gpio-controller;
598 #gpio-cells = <2>;
599
600 interrupt-controller;
601 #interrupt-cells = <2>;
602 };
603
604 gpio2: gpio@20084000 {
605 compatible = "rockchip,gpio-bank";
606 reg = <0x20084000 0x100>;
607 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
608 clocks = <&cru PCLK_GPIO2>;
609
610 gpio-controller;
611 #gpio-cells = <2>;
612
613 interrupt-controller;
614 #interrupt-cells = <2>;
615 };
616
617 pcfg_pull_default: pcfg-pull-default {
618 bias-pull-pin-default;
619 };
620
621 pcfg_pull_none: pcfg-pull-none {
622 bias-disable;
623 };
624
625 pwm0 {
626 pwm0_pin: pwm0-pin {
627 rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
628 };
629 };
630
631 pwm1 {
632 pwm1_pin: pwm1-pin {
633 rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
634 };
635 };
636
637 pwm2 {
638 pwm2_pin: pwm2-pin {
639 rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
640 };
641 };
642
643 pwm3 {
644 pwm3_pin: pwm3-pin {
645 rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
646 };
647 };
648
649 sdmmc {
650 sdmmc_clk: sdmmc-clk {
651 rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
652 };
653
654 sdmmc_cmd: sdmmc-cmd {
655 rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
656 };
657
658 sdmmc_cd: sdmmc-cd {
659 rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>;
660 };
661
662 sdmmc_bus1: sdmmc-bus1 {
663 rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>;
664 };
665
666 sdmmc_bus4: sdmmc-bus4 {
667 rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
668 <1 RK_PC3 1 &pcfg_pull_default>,
669 <1 RK_PC4 1 &pcfg_pull_default>,
670 <1 RK_PC5 1 &pcfg_pull_default>;
671 };
672 };
673
674 sdio {
675 sdio_bus1: sdio-bus1 {
676 rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>;
677 };
678
679 sdio_bus4: sdio-bus4 {
680 rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>,
681 <0 RK_PB4 1 &pcfg_pull_default>,
682 <0 RK_PB5 1 &pcfg_pull_default>,
683 <0 RK_PB6 1 &pcfg_pull_default>;
684 };
685
686 sdio_cmd: sdio-cmd {
687 rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>;
688 };
689
690 sdio_clk: sdio-clk {
691 rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>;
692 };
693 };
694
695 emmc {
696 /*
697 * We run eMMC at max speed; bump up drive strength.
698 * We also have external pulls, so disable the internal ones.
699 */
700 emmc_clk: emmc-clk {
701 rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
702 };
703
704 emmc_cmd: emmc-cmd {
705 rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>;
706 };
707
708 emmc_bus8: emmc-bus8 {
709 rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
710 <1 RK_PD1 2 &pcfg_pull_default>,
711 <1 RK_PD2 2 &pcfg_pull_default>,
712 <1 RK_PD3 2 &pcfg_pull_default>,
713 <1 RK_PD4 2 &pcfg_pull_default>,
714 <1 RK_PD5 2 &pcfg_pull_default>,
715 <1 RK_PD6 2 &pcfg_pull_default>,
716 <1 RK_PD7 2 &pcfg_pull_default>;
717 };
718 };
719
720 nfc {
721 flash_ale: flash-ale {
722 rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>;
723 };
724
725 flash_bus8: flash-bus8 {
726 rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>,
727 <1 RK_PD1 1 &pcfg_pull_default>,
728 <1 RK_PD2 1 &pcfg_pull_default>,
729 <1 RK_PD3 1 &pcfg_pull_default>,
730 <1 RK_PD4 1 &pcfg_pull_default>,
731 <1 RK_PD5 1 &pcfg_pull_default>,
732 <1 RK_PD6 1 &pcfg_pull_default>,
733 <1 RK_PD7 1 &pcfg_pull_default>;
734 };
735
736 flash_cle: flash-cle {
737 rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>;
738 };
739
740 flash_csn0: flash-csn0 {
741 rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>;
742 };
743
744 flash_rdn: flash-rdn {
745 rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>;
746 };
747
748 flash_rdy: flash-rdy {
749 rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>;
750 };
751
752 flash_wrn: flash-wrn {
753 rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>;
754 };
755 };
756
757 emac {
758 emac_xfer: emac-xfer {
759 rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */
760 <2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */
761 <2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */
762 <2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */
763 <2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */
764 <2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */
765 <2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */
766 <2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */
767 };
768
769 emac_mdio: emac-mdio {
770 rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */
771 <2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */
772 };
773 };
774
775 i2c0 {
776 i2c0_xfer: i2c0-xfer {
777 rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
778 <0 RK_PA1 1 &pcfg_pull_none>;
779 };
780 };
781
782 i2c1 {
783 i2c1_xfer: i2c1-xfer {
784 rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
785 <0 RK_PA3 1 &pcfg_pull_none>;
786 };
787 };
788
789 i2c2 {
790 i2c2_xfer: i2c2-xfer {
791 rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>,
792 <2 RK_PC5 1 &pcfg_pull_none>;
793 };
794 };
795
796 i2s {
797 i2s_bus: i2s-bus {
798 rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>,
799 <1 RK_PA1 1 &pcfg_pull_default>,
800 <1 RK_PA2 1 &pcfg_pull_default>,
801 <1 RK_PA3 1 &pcfg_pull_default>,
802 <1 RK_PA4 1 &pcfg_pull_default>,
803 <1 RK_PA5 1 &pcfg_pull_default>;
804 };
805 };
806
807 hdmi {
808 hdmi_ctl: hdmi-ctl {
809 rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
810 <1 RK_PB1 1 &pcfg_pull_none>,
811 <1 RK_PB2 1 &pcfg_pull_none>,
812 <1 RK_PB3 1 &pcfg_pull_none>;
813 };
814 };
815
816 uart0 {
817 uart0_xfer: uart0-xfer {
818 rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>,
819 <0 RK_PC1 1 &pcfg_pull_none>;
820 };
821
822 uart0_cts: uart0-cts {
823 rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>;
824 };
825
826 uart0_rts: uart0-rts {
827 rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
828 };
829 };
830
831 uart1 {
832 uart1_xfer: uart1-xfer {
833 rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>,
834 <2 RK_PC7 1 &pcfg_pull_none>;
835 };
836 /* no rts / cts for uart1 */
837 };
838
839 uart2 {
840 uart2_xfer: uart2-xfer {
841 rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
842 <1 RK_PC3 2 &pcfg_pull_none>;
843 };
844 /* no rts / cts for uart2 */
845 };
846
847 spi-pins {
848 spi_txd:spi-txd {
849 rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
850 };
851
852 spi_rxd:spi-rxd {
853 rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
854 };
855
856 spi_clk:spi-clk {
857 rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
858 };
859
860 spi_cs0:spi-cs0 {
861 rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
862
863 };
864
865 spi_cs1:spi-cs1 {
866 rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
867
868 };
869 };
870 };
871};
1/*
2 * This file is dual-licensed: you can use it either under the terms
3 * of the GPL or the X11 license, at your option. Note that this dual
4 * licensing only applies to this file, and not this project as a
5 * whole.
6 *
7 * a) This file is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of the
10 * License, or (at your option) any later version.
11 *
12 * This file is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * Or, alternatively,
18 *
19 * b) Permission is hereby granted, free of charge, to any person
20 * obtaining a copy of this software and associated documentation
21 * files (the "Software"), to deal in the Software without
22 * restriction, including without limitation the rights to use,
23 * copy, modify, merge, publish, distribute, sublicense, and/or
24 * sell copies of the Software, and to permit persons to whom the
25 * Software is furnished to do so, subject to the following
26 * conditions:
27 *
28 * The above copyright notice and this permission notice shall be
29 * included in all copies or substantial portions of the Software.
30 *
31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
32 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
33 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
34 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
35 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
36 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
37 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
38 * OTHER DEALINGS IN THE SOFTWARE.
39 */
40
41#include <dt-bindings/gpio/gpio.h>
42#include <dt-bindings/interrupt-controller/irq.h>
43#include <dt-bindings/interrupt-controller/arm-gic.h>
44#include <dt-bindings/pinctrl/rockchip.h>
45#include <dt-bindings/clock/rk3036-cru.h>
46#include <dt-bindings/soc/rockchip,boot-mode.h>
47
48/ {
49 #address-cells = <1>;
50 #size-cells = <1>;
51
52 compatible = "rockchip,rk3036";
53
54 interrupt-parent = <&gic>;
55
56 aliases {
57 i2c0 = &i2c0;
58 i2c1 = &i2c1;
59 i2c2 = &i2c2;
60 mshc0 = &emmc;
61 mshc1 = &sdmmc;
62 mshc2 = &sdio;
63 serial0 = &uart0;
64 serial1 = &uart1;
65 serial2 = &uart2;
66 spi = &spi;
67 };
68
69 cpus {
70 #address-cells = <1>;
71 #size-cells = <0>;
72 enable-method = "rockchip,rk3036-smp";
73
74 cpu0: cpu@f00 {
75 device_type = "cpu";
76 compatible = "arm,cortex-a7";
77 reg = <0xf00>;
78 resets = <&cru SRST_CORE0>;
79 operating-points = <
80 /* KHz uV */
81 816000 1000000
82 >;
83 clock-latency = <40000>;
84 clocks = <&cru ARMCLK>;
85 };
86
87 cpu1: cpu@f01 {
88 device_type = "cpu";
89 compatible = "arm,cortex-a7";
90 reg = <0xf01>;
91 resets = <&cru SRST_CORE1>;
92 };
93 };
94
95 amba {
96 compatible = "simple-bus";
97 #address-cells = <1>;
98 #size-cells = <1>;
99 ranges;
100
101 pdma: pdma@20078000 {
102 compatible = "arm,pl330", "arm,primecell";
103 reg = <0x20078000 0x4000>;
104 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
105 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
106 #dma-cells = <1>;
107 arm,pl330-broken-no-flushp;
108 clocks = <&cru ACLK_DMAC2>;
109 clock-names = "apb_pclk";
110 };
111 };
112
113 arm-pmu {
114 compatible = "arm,cortex-a7-pmu";
115 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
116 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
117 interrupt-affinity = <&cpu0>, <&cpu1>;
118 };
119
120 display-subsystem {
121 compatible = "rockchip,display-subsystem";
122 ports = <&vop_out>;
123 };
124
125 timer {
126 compatible = "arm,armv7-timer";
127 arm,cpu-registers-not-fw-configured;
128 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
129 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
130 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
131 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
132 clock-frequency = <24000000>;
133 };
134
135 xin24m: oscillator {
136 compatible = "fixed-clock";
137 clock-frequency = <24000000>;
138 clock-output-names = "xin24m";
139 #clock-cells = <0>;
140 };
141
142 bus_intmem@10080000 {
143 compatible = "mmio-sram";
144 reg = <0x10080000 0x2000>;
145 #address-cells = <1>;
146 #size-cells = <1>;
147 ranges = <0 0x10080000 0x2000>;
148
149 smp-sram@0 {
150 compatible = "rockchip,rk3066-smp-sram";
151 reg = <0x00 0x10>;
152 };
153 };
154
155 vop: vop@10118000 {
156 compatible = "rockchip,rk3036-vop";
157 reg = <0x10118000 0x19c>;
158 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
159 clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
160 clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
161 resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
162 reset-names = "axi", "ahb", "dclk";
163 iommus = <&vop_mmu>;
164 status = "disabled";
165
166 vop_out: port {
167 #address-cells = <1>;
168 #size-cells = <0>;
169 vop_out_hdmi: endpoint@0 {
170 reg = <0>;
171 remote-endpoint = <&hdmi_in_vop>;
172 };
173 };
174 };
175
176 vop_mmu: iommu@10118300 {
177 compatible = "rockchip,iommu";
178 reg = <0x10118300 0x100>;
179 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
180 interrupt-names = "vop_mmu";
181 #iommu-cells = <0>;
182 status = "disabled";
183 };
184
185 gic: interrupt-controller@10139000 {
186 compatible = "arm,gic-400";
187 interrupt-controller;
188 #interrupt-cells = <3>;
189 #address-cells = <0>;
190
191 reg = <0x10139000 0x1000>,
192 <0x1013a000 0x1000>,
193 <0x1013c000 0x2000>,
194 <0x1013e000 0x2000>;
195 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
196 };
197
198 usb_otg: usb@10180000 {
199 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
200 "snps,dwc2";
201 reg = <0x10180000 0x40000>;
202 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
203 clocks = <&cru HCLK_OTG0>;
204 clock-names = "otg";
205 dr_mode = "otg";
206 g-np-tx-fifo-size = <16>;
207 g-rx-fifo-size = <275>;
208 g-tx-fifo-size = <256 128 128 64 64 32>;
209 status = "disabled";
210 };
211
212 usb_host: usb@101c0000 {
213 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
214 "snps,dwc2";
215 reg = <0x101c0000 0x40000>;
216 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
217 clocks = <&cru HCLK_OTG1>;
218 clock-names = "otg";
219 dr_mode = "host";
220 status = "disabled";
221 };
222
223 emac: ethernet@10200000 {
224 compatible = "rockchip,rk3036-emac", "snps,arc-emac";
225 reg = <0x10200000 0x4000>;
226 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
227 #address-cells = <1>;
228 #size-cells = <0>;
229 rockchip,grf = <&grf>;
230 clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
231 clock-names = "hclk", "macref", "macclk";
232 /*
233 * Fix the emac parent clock is DPLL instead of APLL.
234 * since that will cause some unstable things if the cpufreq
235 * is working. (e.g: the accurate 50MHz what mac_ref need)
236 */
237 assigned-clocks = <&cru SCLK_MACPLL>;
238 assigned-clock-parents = <&cru PLL_DPLL>;
239 max-speed = <100>;
240 phy-mode = "rmii";
241 status = "disabled";
242 };
243
244 sdmmc: dwmmc@10214000 {
245 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
246 reg = <0x10214000 0x4000>;
247 clock-frequency = <37500000>;
248 max-frequency = <37500000>;
249 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
250 clock-names = "biu", "ciu";
251 fifo-depth = <0x100>;
252 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
253 status = "disabled";
254 };
255
256 sdio: dwmmc@10218000 {
257 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
258 reg = <0x10218000 0x4000>;
259 max-frequency = <37500000>;
260 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
261 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
262 clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
263 fifo-depth = <0x100>;
264 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
265 status = "disabled";
266 };
267
268 emmc: dwmmc@1021c000 {
269 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
270 reg = <0x1021c000 0x4000>;
271 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
272 bus-width = <8>;
273 cap-mmc-highspeed;
274 clock-frequency = <37500000>;
275 max-frequency = <37500000>;
276 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
277 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
278 clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
279 default-sample-phase = <158>;
280 disable-wp;
281 dmas = <&pdma 12>;
282 dma-names = "rx-tx";
283 fifo-depth = <0x100>;
284 mmc-ddr-1_8v;
285 non-removable;
286 num-slots = <1>;
287 pinctrl-names = "default";
288 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
289 status = "disabled";
290 };
291
292 i2s: i2s@10220000 {
293 compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
294 reg = <0x10220000 0x4000>;
295 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
296 #address-cells = <1>;
297 #size-cells = <0>;
298 clock-names = "i2s_clk", "i2s_hclk";
299 clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
300 dmas = <&pdma 0>, <&pdma 1>;
301 dma-names = "tx", "rx";
302 pinctrl-names = "default";
303 pinctrl-0 = <&i2s_bus>;
304 status = "disabled";
305 };
306
307 cru: clock-controller@20000000 {
308 compatible = "rockchip,rk3036-cru";
309 reg = <0x20000000 0x1000>;
310 rockchip,grf = <&grf>;
311 #clock-cells = <1>;
312 #reset-cells = <1>;
313 assigned-clocks = <&cru PLL_GPLL>;
314 assigned-clock-rates = <594000000>;
315 };
316
317 grf: syscon@20008000 {
318 compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
319 reg = <0x20008000 0x1000>;
320
321 reboot-mode {
322 compatible = "syscon-reboot-mode";
323 offset = <0x1d8>;
324 mode-normal = <BOOT_NORMAL>;
325 mode-recovery = <BOOT_RECOVERY>;
326 mode-bootloader = <BOOT_FASTBOOT>;
327 mode-loader = <BOOT_BL_DOWNLOAD>;
328 };
329 };
330
331 acodec: acodec-ana@20030000 {
332 compatible = "rk3036-codec";
333 reg = <0x20030000 0x4000>;
334 rockchip,grf = <&grf>;
335 clock-names = "acodec_pclk";
336 clocks = <&cru PCLK_ACODEC>;
337 status = "disabled";
338 };
339
340 hdmi: hdmi@20034000 {
341 compatible = "rockchip,rk3036-inno-hdmi";
342 reg = <0x20034000 0x4000>;
343 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
344 clocks = <&cru PCLK_HDMI>;
345 clock-names = "pclk";
346 rockchip,grf = <&grf>;
347 pinctrl-names = "default";
348 pinctrl-0 = <&hdmi_ctl>;
349 status = "disabled";
350
351 hdmi_in: port {
352 #address-cells = <1>;
353 #size-cells = <0>;
354 hdmi_in_vop: endpoint@0 {
355 reg = <0>;
356 remote-endpoint = <&vop_out_hdmi>;
357 };
358 };
359 };
360
361 timer: timer@20044000 {
362 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
363 reg = <0x20044000 0x20>;
364 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
365 clocks = <&xin24m>, <&cru PCLK_TIMER>;
366 clock-names = "timer", "pclk";
367 };
368
369 pwm0: pwm@20050000 {
370 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
371 reg = <0x20050000 0x10>;
372 #pwm-cells = <3>;
373 clocks = <&cru PCLK_PWM>;
374 clock-names = "pwm";
375 pinctrl-names = "default";
376 pinctrl-0 = <&pwm0_pin>;
377 status = "disabled";
378 };
379
380 pwm1: pwm@20050010 {
381 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
382 reg = <0x20050010 0x10>;
383 #pwm-cells = <3>;
384 clocks = <&cru PCLK_PWM>;
385 clock-names = "pwm";
386 pinctrl-names = "default";
387 pinctrl-0 = <&pwm1_pin>;
388 status = "disabled";
389 };
390
391 pwm2: pwm@20050020 {
392 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
393 reg = <0x20050020 0x10>;
394 #pwm-cells = <3>;
395 clocks = <&cru PCLK_PWM>;
396 clock-names = "pwm";
397 pinctrl-names = "default";
398 pinctrl-0 = <&pwm2_pin>;
399 status = "disabled";
400 };
401
402 pwm3: pwm@20050030 {
403 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
404 reg = <0x20050030 0x10>;
405 #pwm-cells = <2>;
406 clocks = <&cru PCLK_PWM>;
407 clock-names = "pwm";
408 pinctrl-names = "default";
409 pinctrl-0 = <&pwm3_pin>;
410 status = "disabled";
411 };
412
413 i2c1: i2c@20056000 {
414 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
415 reg = <0x20056000 0x1000>;
416 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
417 #address-cells = <1>;
418 #size-cells = <0>;
419 clock-names = "i2c";
420 clocks = <&cru PCLK_I2C1>;
421 pinctrl-names = "default";
422 pinctrl-0 = <&i2c1_xfer>;
423 status = "disabled";
424 };
425
426 i2c2: i2c@2005a000 {
427 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
428 reg = <0x2005a000 0x1000>;
429 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
430 #address-cells = <1>;
431 #size-cells = <0>;
432 clock-names = "i2c";
433 clocks = <&cru PCLK_I2C2>;
434 pinctrl-names = "default";
435 pinctrl-0 = <&i2c2_xfer>;
436 status = "disabled";
437 };
438
439 uart0: serial@20060000 {
440 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
441 reg = <0x20060000 0x100>;
442 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
443 reg-shift = <2>;
444 reg-io-width = <4>;
445 clock-frequency = <24000000>;
446 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
447 clock-names = "baudclk", "apb_pclk";
448 pinctrl-names = "default";
449 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
450 status = "disabled";
451 };
452
453 uart1: serial@20064000 {
454 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
455 reg = <0x20064000 0x100>;
456 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
457 reg-shift = <2>;
458 reg-io-width = <4>;
459 clock-frequency = <24000000>;
460 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
461 clock-names = "baudclk", "apb_pclk";
462 pinctrl-names = "default";
463 pinctrl-0 = <&uart1_xfer>;
464 status = "disabled";
465 };
466
467 uart2: serial@20068000 {
468 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
469 reg = <0x20068000 0x100>;
470 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
471 reg-shift = <2>;
472 reg-io-width = <4>;
473 clock-frequency = <24000000>;
474 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
475 clock-names = "baudclk", "apb_pclk";
476 pinctrl-names = "default";
477 pinctrl-0 = <&uart2_xfer>;
478 status = "disabled";
479 };
480
481 i2c0: i2c@20072000 {
482 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
483 reg = <0x20072000 0x1000>;
484 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
485 #address-cells = <1>;
486 #size-cells = <0>;
487 clock-names = "i2c";
488 clocks = <&cru PCLK_I2C0>;
489 pinctrl-names = "default";
490 pinctrl-0 = <&i2c0_xfer>;
491 status = "disabled";
492 };
493
494 spi: spi@20074000 {
495 compatible = "rockchip,rockchip-spi";
496 reg = <0x20074000 0x1000>;
497 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
498 clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
499 clock-names = "apb-pclk","spi_pclk";
500 dmas = <&pdma 8>, <&pdma 9>;
501 dma-names = "tx", "rx";
502 pinctrl-names = "default";
503 pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
504 #address-cells = <1>;
505 #size-cells = <0>;
506 status = "disabled";
507 };
508
509 pinctrl: pinctrl {
510 compatible = "rockchip,rk3036-pinctrl";
511 rockchip,grf = <&grf>;
512 #address-cells = <1>;
513 #size-cells = <1>;
514 ranges;
515
516 gpio0: gpio0@2007c000 {
517 compatible = "rockchip,gpio-bank";
518 reg = <0x2007c000 0x100>;
519 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
520 clocks = <&cru PCLK_GPIO0>;
521
522 gpio-controller;
523 #gpio-cells = <2>;
524
525 interrupt-controller;
526 #interrupt-cells = <2>;
527 };
528
529 gpio1: gpio1@20080000 {
530 compatible = "rockchip,gpio-bank";
531 reg = <0x20080000 0x100>;
532 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
533 clocks = <&cru PCLK_GPIO1>;
534
535 gpio-controller;
536 #gpio-cells = <2>;
537
538 interrupt-controller;
539 #interrupt-cells = <2>;
540 };
541
542 gpio2: gpio2@20084000 {
543 compatible = "rockchip,gpio-bank";
544 reg = <0x20084000 0x100>;
545 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
546 clocks = <&cru PCLK_GPIO2>;
547
548 gpio-controller;
549 #gpio-cells = <2>;
550
551 interrupt-controller;
552 #interrupt-cells = <2>;
553 };
554
555 pcfg_pull_default: pcfg_pull_default {
556 bias-pull-pin-default;
557 };
558
559 pcfg_pull_none: pcfg-pull-none {
560 bias-disable;
561 };
562
563 pwm0 {
564 pwm0_pin: pwm0-pin {
565 rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
566 };
567 };
568
569 pwm1 {
570 pwm1_pin: pwm1-pin {
571 rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
572 };
573 };
574
575 pwm2 {
576 pwm2_pin: pwm2-pin {
577 rockchip,pins = <0 1 2 &pcfg_pull_none>;
578 };
579 };
580
581 pwm3 {
582 pwm3_pin: pwm3-pin {
583 rockchip,pins = <0 27 1 &pcfg_pull_none>;
584 };
585 };
586
587 sdmmc {
588 sdmmc_clk: sdmmc-clk {
589 rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
590 };
591
592 sdmmc_cmd: sdmmc-cmd {
593 rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
594 };
595
596 sdmmc_cd: sdmcc-cd {
597 rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
598 };
599
600 sdmmc_bus1: sdmmc-bus1 {
601 rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
602 };
603
604 sdmmc_bus4: sdmmc-bus4 {
605 rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
606 <1 19 RK_FUNC_1 &pcfg_pull_default>,
607 <1 20 RK_FUNC_1 &pcfg_pull_default>,
608 <1 21 RK_FUNC_1 &pcfg_pull_default>;
609 };
610 };
611
612 sdio {
613 sdio_bus1: sdio-bus1 {
614 rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
615 };
616
617 sdio_bus4: sdio-bus4 {
618 rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
619 <0 12 RK_FUNC_1 &pcfg_pull_default>,
620 <0 13 RK_FUNC_1 &pcfg_pull_default>,
621 <0 14 RK_FUNC_1 &pcfg_pull_default>;
622 };
623
624 sdio_cmd: sdio-cmd {
625 rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
626 };
627
628 sdio_clk: sdio-clk {
629 rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
630 };
631 };
632
633 emmc {
634 /*
635 * We run eMMC at max speed; bump up drive strength.
636 * We also have external pulls, so disable the internal ones.
637 */
638 emmc_clk: emmc-clk {
639 rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
640 };
641
642 emmc_cmd: emmc-cmd {
643 rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
644 };
645
646 emmc_bus8: emmc-bus8 {
647 rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
648 <1 25 RK_FUNC_2 &pcfg_pull_default>,
649 <1 26 RK_FUNC_2 &pcfg_pull_default>,
650 <1 27 RK_FUNC_2 &pcfg_pull_default>,
651 <1 28 RK_FUNC_2 &pcfg_pull_default>,
652 <1 29 RK_FUNC_2 &pcfg_pull_default>,
653 <1 30 RK_FUNC_2 &pcfg_pull_default>,
654 <1 31 RK_FUNC_2 &pcfg_pull_default>;
655 };
656 };
657
658 emac {
659 emac_xfer: emac-xfer {
660 rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
661 <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
662 <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
663 <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
664 <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
665 <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
666 <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
667 <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
668 };
669
670 emac_mdio: emac-mdio {
671 rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
672 <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
673 };
674 };
675
676 i2c0 {
677 i2c0_xfer: i2c0-xfer {
678 rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
679 <0 1 RK_FUNC_1 &pcfg_pull_none>;
680 };
681 };
682
683 i2c1 {
684 i2c1_xfer: i2c1-xfer {
685 rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
686 <0 3 RK_FUNC_1 &pcfg_pull_none>;
687 };
688 };
689
690 i2c2 {
691 i2c2_xfer: i2c2-xfer {
692 rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
693 <2 21 RK_FUNC_1 &pcfg_pull_none>;
694 };
695 };
696
697 i2s {
698 i2s_bus: i2s-bus {
699 rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
700 <1 1 RK_FUNC_1 &pcfg_pull_default>,
701 <1 2 RK_FUNC_1 &pcfg_pull_default>,
702 <1 3 RK_FUNC_1 &pcfg_pull_default>,
703 <1 4 RK_FUNC_1 &pcfg_pull_default>,
704 <1 5 RK_FUNC_1 &pcfg_pull_default>;
705 };
706 };
707
708 hdmi {
709 hdmi_ctl: hdmi-ctl {
710 rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
711 <1 9 RK_FUNC_1 &pcfg_pull_none>,
712 <1 10 RK_FUNC_1 &pcfg_pull_none>,
713 <1 11 RK_FUNC_1 &pcfg_pull_none>;
714 };
715 };
716
717 uart0 {
718 uart0_xfer: uart0-xfer {
719 rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
720 <0 17 RK_FUNC_1 &pcfg_pull_none>;
721 };
722
723 uart0_cts: uart0-cts {
724 rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
725 };
726
727 uart0_rts: uart0-rts {
728 rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
729 };
730 };
731
732 uart1 {
733 uart1_xfer: uart1-xfer {
734 rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
735 <2 23 RK_FUNC_1 &pcfg_pull_none>;
736 };
737 /* no rts / cts for uart1 */
738 };
739
740 uart2 {
741 uart2_xfer: uart2-xfer {
742 rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
743 <1 19 RK_FUNC_2 &pcfg_pull_none>;
744 };
745 /* no rts / cts for uart2 */
746 };
747
748 spi {
749 spi_txd:spi-txd {
750 rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
751 };
752
753 spi_rxd:spi-rxd {
754 rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
755 };
756
757 spi_clk:spi-clk {
758 rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
759 };
760
761 spi_cs0:spi-cs0 {
762 rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
763
764 };
765
766 spi_cs1:spi-cs1 {
767 rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
768
769 };
770 };
771 };
772};