Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
4 */
5
6#include "omap36xx.dtsi"
7
8/ {
9 model = "INCOstartec LILLY-A83X module (DM3730)";
10 compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
11
12 chosen {
13 bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
14 };
15
16 memory@80000000 {
17 device_type = "memory";
18 reg = <0x80000000 0x8000000>; /* 128 MB */
19 };
20
21 leds {
22 compatible = "gpio-leds";
23
24 led1 {
25 label = "lilly-a83x::led1";
26 gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
27 linux,default-trigger = "default-on";
28 };
29
30 };
31
32 sound {
33 compatible = "ti,omap-twl4030";
34 ti,model = "lilly-a83x";
35
36 ti,mcbsp = <&mcbsp2>;
37 };
38
39 reg_vcc3: vcc3 {
40 compatible = "regulator-fixed";
41 regulator-name = "VCC3";
42 regulator-min-microvolt = <3300000>;
43 regulator-max-microvolt = <3300000>;
44 regulator-always-on;
45 };
46
47 hsusb1_phy: hsusb1_phy {
48 compatible = "usb-nop-xceiv";
49 vcc-supply = <®_vcc3>;
50 #phy-cells = <0>;
51 };
52};
53
54&omap3_pmx_wkup {
55 pinctrl-names = "default";
56
57 lan9221_pins: pinmux_lan9221_pins {
58 pinctrl-single,pins = <
59 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
60 >;
61 };
62
63 tsc2048_pins: pinmux_tsc2048_pins {
64 pinctrl-single,pins = <
65 OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
66 >;
67 };
68
69 mmc1cd_pins: pinmux_mmc1cd_pins {
70 pinctrl-single,pins = <
71 OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
72 >;
73 };
74};
75
76&omap3_pmx_core {
77 pinctrl-names = "default";
78
79 uart1_pins: pinmux_uart1_pins {
80 pinctrl-single,pins = <
81 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
82 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
83 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
84 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
85 >;
86 };
87
88 uart2_pins: pinmux_uart2_pins {
89 pinctrl-single,pins = <
90 OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */
91 OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
92 >;
93 };
94
95 uart3_pins: pinmux_uart3_pins {
96 pinctrl-single,pins = <
97 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
98 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
99 >;
100 };
101
102 i2c1_pins: pinmux_i2c1_pins {
103 pinctrl-single,pins = <
104 OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
105 OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
106 >;
107 };
108
109 i2c2_pins: pinmux_i2c2_pins {
110 pinctrl-single,pins = <
111 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
112 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
113 >;
114 };
115
116 i2c3_pins: pinmux_i2c3_pins {
117 pinctrl-single,pins = <
118 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
119 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
120 >;
121 };
122
123 hsusb1_pins: pinmux_hsusb1_pins {
124 pinctrl-single,pins = <
125
126 /* GPIO 182 controls USB-Hub reset. But USB-Phy its
127 * reset can't be controlled. So we clamp this GPIO to
128 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
129 */
130
131 OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
132 >;
133 };
134
135 hsusb_otg_pins: pinmux_hsusb_otg_pins {
136 pinctrl-single,pins = <
137 OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
138 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
139 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
140 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
141 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
142 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
143 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
144 OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
145 OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
146 OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
147 OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
148 OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
149 >;
150 };
151
152 mmc1_pins: pinmux_mmc1_pins {
153 pinctrl-single,pins = <
154 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
155 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
156 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
157 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
158 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
159 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
160 >;
161 };
162
163 spi2_pins: pinmux_spi2_pins {
164 pinctrl-single,pins = <
165 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */
166 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */
167 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */
168 OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */
169 >;
170 };
171};
172
173&omap3_pmx_core2 {
174 pinctrl-names = "default";
175
176 hsusb1_2_pins: pinmux_hsusb1_2_pins {
177 pinctrl-single,pins = <
178 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
179 OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
180 OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
181 OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
182 OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
183 OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
184 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
185 OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
186 OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
187 OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
188 OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
189 OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
190 >;
191 };
192
193 gpio1_pins: pinmux_gpio1_pins {
194 pinctrl-single,pins = <
195 OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */
196 >;
197 };
198
199};
200
201&gpio1 {
202 pinctrl-names = "default";
203 pinctrl-0 = <&gpio1_pins>;
204};
205
206&gpio6 {
207 pinctrl-names = "default";
208 pinctrl-0 = <&hsusb1_pins>;
209};
210
211&i2c1 {
212 clock-frequency = <2600000>;
213 pinctrl-names = "default";
214 pinctrl-0 = <&i2c1_pins>;
215
216 twl: twl@48 {
217 reg = <0x48>;
218 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
219 interrupt-parent = <&intc>;
220
221 twl_audio: audio {
222 compatible = "ti,twl4030-audio";
223 codec {
224 };
225 };
226 };
227};
228
229#include "twl4030.dtsi"
230#include "twl4030_omap3.dtsi"
231
232&twl {
233 vmmc1: regulator-vmmc1 {
234 regulator-always-on;
235 };
236
237 vdd1: regulator-vdd1 {
238 regulator-always-on;
239 };
240
241 vdd2: regulator-vdd2 {
242 regulator-always-on;
243 };
244};
245
246&i2c2 {
247 clock-frequency = <2600000>;
248 pinctrl-names = "default";
249 pinctrl-0 = <&i2c2_pins>;
250};
251
252&i2c3 {
253 clock-frequency = <2600000>;
254 pinctrl-names = "default";
255 pinctrl-0 = <&i2c3_pins>;
256 gpiom1: gpio@20 {
257 compatible = "microchip,mcp23017";
258 gpio-controller;
259 #gpio-cells = <2>;
260 reg = <0x20>;
261 };
262};
263
264&uart1 {
265 pinctrl-names = "default";
266 pinctrl-0 = <&uart1_pins>;
267};
268
269&uart2 {
270 pinctrl-names = "default";
271 pinctrl-0 = <&uart2_pins>;
272};
273
274&uart3 {
275 pinctrl-names = "default";
276 pinctrl-0 = <&uart3_pins>;
277};
278
279&uart4 {
280 status = "disabled";
281};
282
283&mmc1 {
284 cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
285 cd-inverted;
286 vmmc-supply = <&vmmc1>;
287 bus-width = <4>;
288 pinctrl-names = "default";
289 pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
290 cap-sdio-irq;
291 cap-sd-highspeed;
292 cap-mmc-highspeed;
293};
294
295&mmc2 {
296 status = "disabled";
297};
298
299&mmc3 {
300 status = "disabled";
301};
302
303&mcspi2 {
304 status = "okay";
305 pinctrl-names = "default";
306 pinctrl-0 = <&spi2_pins>;
307
308 tsc2046@0 {
309 reg = <0>; /* CS0 */
310 compatible = "ti,tsc2046";
311 interrupt-parent = <&gpio1>;
312 interrupts = <8 0>; /* boot6 / gpio_8 */
313 spi-max-frequency = <1000000>;
314 pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
315 vcc-supply = <®_vcc3>;
316 pinctrl-names = "default";
317 pinctrl-0 = <&tsc2048_pins>;
318
319 ti,x-min = /bits/ 16 <300>;
320 ti,x-max = /bits/ 16 <3000>;
321 ti,y-min = /bits/ 16 <600>;
322 ti,y-max = /bits/ 16 <3600>;
323 ti,x-plate-ohms = /bits/ 16 <80>;
324 ti,pressure-max = /bits/ 16 <255>;
325 ti,swap-xy;
326
327 wakeup-source;
328 };
329};
330
331&usbhsehci {
332 phys = <&hsusb1_phy>;
333};
334
335&usbhshost {
336 pinctrl-names = "default";
337 pinctrl-0 = <&hsusb1_2_pins>;
338 num-ports = <2>;
339 port1-mode = "ehci-phy";
340};
341
342&usb_otg_hs {
343 pinctrl-names = "default";
344 pinctrl-0 = <&hsusb_otg_pins>;
345 interface-type = <0>;
346 usb-phy = <&usb2_phy>;
347 phys = <&usb2_phy>;
348 phy-names = "usb2-phy";
349 mode = <3>;
350 power = <50>;
351};
352
353&mcbsp2 {
354 status = "okay";
355};
356
357&gpmc {
358 ranges = <0 0 0x30000000 0x1000000>,
359 <7 0 0x15000000 0x01000000>;
360
361 nand@0,0 {
362 compatible = "ti,omap2-nand";
363 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
364 interrupt-parent = <&gpmc>;
365 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
366 <1 IRQ_TYPE_NONE>; /* termcount */
367 nand-bus-width = <16>;
368 ti,nand-ecc-opt = "bch8";
369 /* no elm on omap3 */
370
371 gpmc,mux-add-data = <0>;
372 gpmc,device-width = <2>;
373 gpmc,wait-pin = <0>;
374 gpmc,wait-monitoring-ns = <0>;
375 gpmc,burst-length = <4>;
376 gpmc,cs-on-ns = <0>;
377 gpmc,cs-rd-off-ns = <100>;
378 gpmc,cs-wr-off-ns = <100>;
379 gpmc,adv-on-ns = <0>;
380 gpmc,adv-rd-off-ns = <100>;
381 gpmc,adv-wr-off-ns = <100>;
382 gpmc,oe-on-ns = <5>;
383 gpmc,oe-off-ns = <75>;
384 gpmc,we-on-ns = <5>;
385 gpmc,we-off-ns = <75>;
386 gpmc,rd-cycle-ns = <100>;
387 gpmc,wr-cycle-ns = <100>;
388 gpmc,access-ns = <60>;
389 gpmc,page-burst-access-ns = <5>;
390 gpmc,bus-turnaround-ns = <0>;
391 gpmc,cycle2cycle-samecsen;
392 gpmc,cycle2cycle-delay-ns = <50>;
393 gpmc,wr-data-mux-bus-ns = <75>;
394 gpmc,wr-access-ns = <155>;
395
396 #address-cells = <1>;
397 #size-cells = <1>;
398
399 partition@0 {
400 label = "MLO";
401 reg = <0 0x80000>;
402 };
403
404 partition@80000 {
405 label = "u-boot";
406 reg = <0x80000 0x1e0000>;
407 };
408
409 partition@260000 {
410 label = "u-boot-environment";
411 reg = <0x260000 0x20000>;
412 };
413
414 partition@280000 {
415 label = "kernel";
416 reg = <0x280000 0x500000>;
417 };
418
419 partition@780000 {
420 label = "filesystem";
421 reg = <0x780000 0xf880000>;
422 };
423 };
424
425 ethernet@7,0 {
426 compatible = "smsc,lan9221", "smsc,lan9115";
427 bank-width = <2>;
428 gpmc,mux-add-data = <2>;
429 gpmc,cs-on-ns = <10>;
430 gpmc,cs-rd-off-ns = <60>;
431 gpmc,cs-wr-off-ns = <60>;
432 gpmc,adv-on-ns = <0>;
433 gpmc,adv-rd-off-ns = <10>;
434 gpmc,adv-wr-off-ns = <10>;
435 gpmc,oe-on-ns = <10>;
436 gpmc,oe-off-ns = <60>;
437 gpmc,we-on-ns = <10>;
438 gpmc,we-off-ns = <60>;
439 gpmc,rd-cycle-ns = <100>;
440 gpmc,wr-cycle-ns = <100>;
441 gpmc,access-ns = <50>;
442 gpmc,page-burst-access-ns = <5>;
443 gpmc,bus-turnaround-ns = <0>;
444 gpmc,cycle2cycle-delay-ns = <75>;
445 gpmc,wr-data-mux-bus-ns = <15>;
446 gpmc,wr-access-ns = <75>;
447 gpmc,cycle2cycle-samecsen;
448 gpmc,cycle2cycle-diffcsen;
449 vddvario-supply = <®_vcc3>;
450 vdd33a-supply = <®_vcc3>;
451 reg-io-width = <4>;
452 interrupt-parent = <&gpio5>;
453 interrupts = <1 0x2>;
454 reg = <7 0 0xff>;
455 pinctrl-names = "default";
456 pinctrl-0 = <&lan9221_pins>;
457 phy-mode = "mii";
458 };
459};
1/*
2 * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 */
9
10#include "omap36xx.dtsi"
11
12/ {
13 model = "INCOstartec LILLY-A83X module (DM3730)";
14 compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
15
16 chosen {
17 bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
18 };
19
20 memory@80000000 {
21 device_type = "memory";
22 reg = <0x80000000 0x8000000>; /* 128 MB */
23 };
24
25 leds {
26 compatible = "gpio-leds";
27
28 led1 {
29 label = "lilly-a83x::led1";
30 gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
31 linux,default-trigger = "default-on";
32 };
33
34 };
35
36 sound {
37 compatible = "ti,omap-twl4030";
38 ti,model = "lilly-a83x";
39
40 ti,mcbsp = <&mcbsp2>;
41 };
42
43 reg_vcc3: vcc3 {
44 compatible = "regulator-fixed";
45 regulator-name = "VCC3";
46 regulator-min-microvolt = <3300000>;
47 regulator-max-microvolt = <3300000>;
48 regulator-always-on;
49 };
50
51 hsusb1_phy: hsusb1_phy {
52 compatible = "usb-nop-xceiv";
53 vcc-supply = <®_vcc3>;
54 };
55};
56
57&omap3_pmx_wkup {
58 pinctrl-names = "default";
59
60 lan9221_pins: pinmux_lan9221_pins {
61 pinctrl-single,pins = <
62 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
63 >;
64 };
65
66 tsc2048_pins: pinmux_tsc2048_pins {
67 pinctrl-single,pins = <
68 OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */
69 >;
70 };
71
72 mmc1cd_pins: pinmux_mmc1cd_pins {
73 pinctrl-single,pins = <
74 OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */
75 >;
76 };
77};
78
79&omap3_pmx_core {
80 pinctrl-names = "default";
81
82 uart1_pins: pinmux_uart1_pins {
83 pinctrl-single,pins = <
84 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
85 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
86 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
87 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
88 >;
89 };
90
91 uart2_pins: pinmux_uart2_pins {
92 pinctrl-single,pins = <
93 OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */
94 OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
95 >;
96 };
97
98 uart3_pins: pinmux_uart3_pins {
99 pinctrl-single,pins = <
100 OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
101 OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
102 >;
103 };
104
105 i2c1_pins: pinmux_i2c1_pins {
106 pinctrl-single,pins = <
107 OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
108 OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
109 >;
110 };
111
112 i2c2_pins: pinmux_i2c2_pins {
113 pinctrl-single,pins = <
114 OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
115 OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
116 >;
117 };
118
119 i2c3_pins: pinmux_i2c3_pins {
120 pinctrl-single,pins = <
121 OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
122 OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
123 >;
124 };
125
126 hsusb1_pins: pinmux_hsusb1_pins {
127 pinctrl-single,pins = <
128
129 /* GPIO 182 controls USB-Hub reset. But USB-Phy its
130 * reset can't be controlled. So we clamp this GPIO to
131 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
132 */
133
134 OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
135 >;
136 };
137
138 hsusb_otg_pins: pinmux_hsusb_otg_pins {
139 pinctrl-single,pins = <
140 OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
141 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
142 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
143 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
144 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
145 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
146 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
147 OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
148 OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
149 OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
150 OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
151 OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
152 >;
153 };
154
155 mmc1_pins: pinmux_mmc1_pins {
156 pinctrl-single,pins = <
157 OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
158 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
159 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
160 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
161 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
162 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
163 >;
164 };
165
166 spi2_pins: pinmux_spi2_pins {
167 pinctrl-single,pins = <
168 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */
169 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */
170 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */
171 OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */
172 >;
173 };
174};
175
176&omap3_pmx_core2 {
177 pinctrl-names = "default";
178
179 hsusb1_2_pins: pinmux_hsusb1_2_pins {
180 pinctrl-single,pins = <
181 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
182 OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
183 OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
184 OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
185 OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
186 OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
187 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
188 OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
189 OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
190 OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
191 OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
192 OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
193 >;
194 };
195
196 gpio1_pins: pinmux_gpio1_pins {
197 pinctrl-single,pins = <
198 OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */
199 >;
200 };
201
202};
203
204&gpio1 {
205 pinctrl-names = "default";
206 pinctrl-0 = <&gpio1_pins>;
207};
208
209&gpio6 {
210 pinctrl-names = "default";
211 pinctrl-0 = <&hsusb1_pins>;
212};
213
214&i2c1 {
215 clock-frequency = <2600000>;
216 pinctrl-names = "default";
217 pinctrl-0 = <&i2c1_pins>;
218
219 twl: twl@48 {
220 reg = <0x48>;
221 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
222 interrupt-parent = <&intc>;
223
224 twl_audio: audio {
225 compatible = "ti,twl4030-audio";
226 codec {
227 };
228 };
229 };
230};
231
232#include "twl4030.dtsi"
233#include "twl4030_omap3.dtsi"
234
235&twl {
236 vmmc1: regulator-vmmc1 {
237 regulator-always-on;
238 };
239
240 vdd1: regulator-vdd1 {
241 regulator-always-on;
242 };
243
244 vdd2: regulator-vdd2 {
245 regulator-always-on;
246 };
247};
248
249&i2c2 {
250 clock-frequency = <2600000>;
251 pinctrl-names = "default";
252 pinctrl-0 = <&i2c2_pins>;
253};
254
255&i2c3 {
256 clock-frequency = <2600000>;
257 pinctrl-names = "default";
258 pinctrl-0 = <&i2c3_pins>;
259 gpiom1: gpio@20 {
260 compatible = "mcp,mcp23017";
261 gpio-controller;
262 #gpio-cells = <2>;
263 reg = <0x20>;
264 };
265};
266
267&uart1 {
268 pinctrl-names = "default";
269 pinctrl-0 = <&uart1_pins>;
270};
271
272&uart2 {
273 pinctrl-names = "default";
274 pinctrl-0 = <&uart2_pins>;
275};
276
277&uart3 {
278 pinctrl-names = "default";
279 pinctrl-0 = <&uart3_pins>;
280};
281
282&uart4 {
283 status = "disabled";
284};
285
286&mmc1 {
287 cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
288 cd-inverted;
289 vmmc-supply = <&vmmc1>;
290 bus-width = <4>;
291 pinctrl-names = "default";
292 pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
293 cap-sdio-irq;
294 cap-sd-highspeed;
295 cap-mmc-highspeed;
296};
297
298&mmc2 {
299 status = "disabled";
300};
301
302&mmc3 {
303 status = "disabled";
304};
305
306&mcspi2 {
307 status = "okay";
308 pinctrl-names = "default";
309 pinctrl-0 = <&spi2_pins>;
310
311 tsc2046@0 {
312 reg = <0>; /* CS0 */
313 compatible = "ti,tsc2046";
314 interrupt-parent = <&gpio1>;
315 interrupts = <8 0>; /* boot6 / gpio_8 */
316 spi-max-frequency = <1000000>;
317 pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
318 vcc-supply = <®_vcc3>;
319 pinctrl-names = "default";
320 pinctrl-0 = <&tsc2048_pins>;
321
322 ti,x-min = /bits/ 16 <300>;
323 ti,x-max = /bits/ 16 <3000>;
324 ti,y-min = /bits/ 16 <600>;
325 ti,y-max = /bits/ 16 <3600>;
326 ti,x-plate-ohms = /bits/ 16 <80>;
327 ti,pressure-max = /bits/ 16 <255>;
328 ti,swap-xy;
329
330 wakeup-source;
331 };
332};
333
334&usbhsehci {
335 phys = <&hsusb1_phy>;
336};
337
338&usbhshost {
339 pinctrl-names = "default";
340 pinctrl-0 = <&hsusb1_2_pins>;
341 num-ports = <2>;
342 port1-mode = "ehci-phy";
343};
344
345&usb_otg_hs {
346 pinctrl-names = "default";
347 pinctrl-0 = <&hsusb_otg_pins>;
348 interface-type = <0>;
349 usb-phy = <&usb2_phy>;
350 phys = <&usb2_phy>;
351 phy-names = "usb2-phy";
352 mode = <3>;
353 power = <50>;
354};
355
356&mcbsp2 {
357 status = "okay";
358};
359
360&gpmc {
361 ranges = <0 0 0x30000000 0x1000000>,
362 <7 0 0x15000000 0x01000000>;
363
364 nand@0,0 {
365 compatible = "ti,omap2-nand";
366 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
367 interrupt-parent = <&gpmc>;
368 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
369 <1 IRQ_TYPE_NONE>; /* termcount */
370 nand-bus-width = <16>;
371 ti,nand-ecc-opt = "bch8";
372 /* no elm on omap3 */
373
374 gpmc,mux-add-data = <0>;
375 gpmc,device-width = <2>;
376 gpmc,wait-pin = <0>;
377 gpmc,wait-monitoring-ns = <0>;
378 gpmc,burst-length= <4>;
379 gpmc,cs-on-ns = <0>;
380 gpmc,cs-rd-off-ns = <100>;
381 gpmc,cs-wr-off-ns = <100>;
382 gpmc,adv-on-ns = <0>;
383 gpmc,adv-rd-off-ns = <100>;
384 gpmc,adv-wr-off-ns = <100>;
385 gpmc,oe-on-ns = <5>;
386 gpmc,oe-off-ns = <75>;
387 gpmc,we-on-ns = <5>;
388 gpmc,we-off-ns = <75>;
389 gpmc,rd-cycle-ns = <100>;
390 gpmc,wr-cycle-ns = <100>;
391 gpmc,access-ns = <60>;
392 gpmc,page-burst-access-ns = <5>;
393 gpmc,bus-turnaround-ns = <0>;
394 gpmc,cycle2cycle-samecsen;
395 gpmc,cycle2cycle-delay-ns = <50>;
396 gpmc,wr-data-mux-bus-ns = <75>;
397 gpmc,wr-access-ns = <155>;
398
399 #address-cells = <1>;
400 #size-cells = <1>;
401
402 partition@0 {
403 label = "MLO";
404 reg = <0 0x80000>;
405 };
406
407 partition@0x80000 {
408 label = "u-boot";
409 reg = <0x80000 0x1e0000>;
410 };
411
412 partition@0x260000 {
413 label = "u-boot-environment";
414 reg = <0x260000 0x20000>;
415 };
416
417 partition@0x280000 {
418 label = "kernel";
419 reg = <0x280000 0x500000>;
420 };
421
422 partition@0x780000 {
423 label = "filesystem";
424 reg = <0x780000 0xf880000>;
425 };
426 };
427
428 ethernet@7,0 {
429 compatible = "smsc,lan9221", "smsc,lan9115";
430 bank-width = <2>;
431 gpmc,mux-add-data = <2>;
432 gpmc,cs-on-ns = <10>;
433 gpmc,cs-rd-off-ns = <60>;
434 gpmc,cs-wr-off-ns = <60>;
435 gpmc,adv-on-ns = <0>;
436 gpmc,adv-rd-off-ns = <10>;
437 gpmc,adv-wr-off-ns = <10>;
438 gpmc,oe-on-ns = <10>;
439 gpmc,oe-off-ns = <60>;
440 gpmc,we-on-ns = <10>;
441 gpmc,we-off-ns = <60>;
442 gpmc,rd-cycle-ns = <100>;
443 gpmc,wr-cycle-ns = <100>;
444 gpmc,access-ns = <50>;
445 gpmc,page-burst-access-ns = <5>;
446 gpmc,bus-turnaround-ns = <0>;
447 gpmc,cycle2cycle-delay-ns = <75>;
448 gpmc,wr-data-mux-bus-ns = <15>;
449 gpmc,wr-access-ns = <75>;
450 gpmc,cycle2cycle-samecsen;
451 gpmc,cycle2cycle-diffcsen;
452 vddvario-supply = <®_vcc3>;
453 vdd33a-supply = <®_vcc3>;
454 reg-io-width = <4>;
455 interrupt-parent = <&gpio5>;
456 interrupts = <1 0x2>;
457 reg = <7 0 0xff>;
458 pinctrl-names = "default";
459 pinctrl-0 = <&lan9221_pins>;
460 phy-mode = "mii";
461 };
462};