Linux Audio

Check our new training course

Loading...
Note: File does not exist in v4.10.11.
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Copyright (c) 2017-2018 MediaTek Inc.
  4 * Author: Sean Wang <sean.wang@mediatek.com>
  5 *
  6 */
  7
  8/dts-v1/;
  9#include <dt-bindings/input/input.h>
 10#include "mt7623a.dtsi"
 11#include "mt6323.dtsi"
 12
 13/ {
 14	model = "MediaTek MT7623A with NAND reference board";
 15	compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
 16
 17	aliases {
 18		serial2 = &uart2;
 19	};
 20
 21	chosen {
 22		stdout-path = "serial2:115200n8";
 23	};
 24
 25	cpus {
 26		cpu@0 {
 27			proc-supply = <&mt6323_vproc_reg>;
 28		};
 29
 30		cpu@1 {
 31			proc-supply = <&mt6323_vproc_reg>;
 32		};
 33
 34		cpu@2 {
 35			proc-supply = <&mt6323_vproc_reg>;
 36		};
 37
 38		cpu@3 {
 39			proc-supply = <&mt6323_vproc_reg>;
 40		};
 41	};
 42
 43	gpio-keys {
 44		compatible = "gpio-keys";
 45		pinctrl-names = "default";
 46		pinctrl-0 = <&key_pins_a>;
 47
 48		button-factory {
 49			label = "factory";
 50			linux,code = <BTN_0>;
 51			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 52		};
 53
 54		button-wps {
 55			label = "wps";
 56			linux,code = <KEY_WPS_BUTTON>;
 57			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
 58		};
 59	};
 60
 61	memory@80000000 {
 62		device_type = "memory";
 63		reg = <0 0x80000000 0 0x20000000>;
 64	};
 65
 66	reg_1p8v: regulator-1p8v {
 67		compatible = "regulator-fixed";
 68		regulator-name = "fixed-1.8V";
 69		regulator-min-microvolt = <1800000>;
 70		regulator-max-microvolt = <1800000>;
 71		regulator-boot-on;
 72		regulator-always-on;
 73	};
 74
 75	reg_3p3v: regulator-3p3v {
 76		compatible = "regulator-fixed";
 77		regulator-name = "fixed-3.3V";
 78		regulator-min-microvolt = <3300000>;
 79		regulator-max-microvolt = <3300000>;
 80		regulator-boot-on;
 81		regulator-always-on;
 82	};
 83
 84	reg_5v: regulator-5v {
 85		compatible = "regulator-fixed";
 86		regulator-name = "fixed-5V";
 87		regulator-min-microvolt = <5000000>;
 88		regulator-max-microvolt = <5000000>;
 89		regulator-boot-on;
 90		regulator-always-on;
 91	};
 92
 93	sound {
 94		compatible = "mediatek,mt2701-wm8960-machine";
 95		mediatek,platform = <&afe>;
 96		audio-routing =
 97			"Headphone", "HP_L",
 98			"Headphone", "HP_R",
 99			"LINPUT1", "AMIC",
100			"RINPUT1", "AMIC";
101		mediatek,audio-codec = <&wm8960>;
102		pinctrl-names = "default";
103		pinctrl-0 = <&i2s0_pins_a>;
104	};
105};
106
107&bch {
108	status = "okay";
109};
110
111&btif {
112	status = "okay";
113};
114
115&crypto {
116	status = "okay";
117};
118
119&eth {
120	status = "okay";
121
122	gmac0: mac@0 {
123		compatible = "mediatek,eth-mac";
124		reg = <0>;
125		phy-mode = "trgmii";
126
127		fixed-link {
128			speed = <1000>;
129			full-duplex;
130			pause;
131		};
132	};
133
134	mdio-bus {
135		#address-cells = <1>;
136		#size-cells = <0>;
137
138		switch@0 {
139			compatible = "mediatek,mt7530";
140			reg = <0>;
141			mediatek,mcm;
142			resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
143			reset-names = "mcm";
144			core-supply = <&mt6323_vpa_reg>;
145			io-supply = <&mt6323_vemc3v3_reg>;
146
147			ports {
148				#address-cells = <1>;
149				#size-cells = <0>;
150
151				port@0 {
152					reg = <0>;
153					label = "lan0";
154				};
155
156				port@1 {
157					reg = <1>;
158					label = "lan1";
159				};
160
161				port@2 {
162					reg = <2>;
163					label = "lan2";
164				};
165
166				port@3 {
167					reg = <3>;
168					label = "lan3";
169				};
170
171				port@4 {
172					reg = <4>;
173					label = "wan";
174				};
175
176				port@6 {
177					reg = <6>;
178					label = "cpu";
179					ethernet = <&gmac0>;
180					phy-mode = "trgmii";
181
182					fixed-link {
183						speed = <1000>;
184						full-duplex;
185					};
186				};
187			};
188		};
189	};
190};
191
192&i2c0 {
193	pinctrl-names = "default";
194	pinctrl-0 = <&i2c0_pins_a>;
195	status = "okay";
196};
197
198&i2c1 {
199	pinctrl-names = "default";
200	pinctrl-0 = <&i2c1_pins_b>;
201	status = "okay";
202
203	wm8960: wm8960@1a {
204		compatible = "wlf,wm8960";
205		reg = <0x1a>;
206	};
207};
208
209&i2c2 {
210	pinctrl-names = "default";
211	pinctrl-0 = <&i2c2_pins_b>;
212	status = "okay";
213};
214
215&mmc1 {
216	pinctrl-names = "default", "state_uhs";
217	pinctrl-0 = <&mmc1_pins_default>;
218	pinctrl-1 = <&mmc1_pins_uhs>;
219	status = "okay";
220	bus-width = <4>;
221	max-frequency = <50000000>;
222	cap-sd-highspeed;
223	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
224	vmmc-supply = <&reg_3p3v>;
225	vqmmc-supply = <&reg_3p3v>;
226};
227
228&nandc {
229	pinctrl-names = "default";
230	pinctrl-0 = <&nand_pins_default>;
231	status = "okay";
232
233	nand@0 {
234		reg = <0>;
235		spare_per_sector = <64>;
236		nand-ecc-mode = "hw";
237		nand-ecc-strength = <12>;
238		nand-ecc-step-size = <1024>;
239
240		partitions {
241			compatible = "fixed-partitions";
242			#address-cells = <1>;
243			#size-cells = <1>;
244
245			partition@0 {
246				label = "preloader";
247				reg = <0x0 0x40000>;
248			};
249
250			partition@40000 {
251				label = "uboot";
252				reg = <0x40000 0x80000>;
253			};
254
255			partition@c0000 {
256				label = "uboot-env";
257				reg = <0xC0000 0x40000>;
258			};
259
260			partition@140000 {
261				label = "bootimg";
262				reg = <0x140000 0x2000000>;
263			};
264
265			partition@2140000 {
266				label = "recovery";
267				reg = <0x2140000 0x2000000>;
268			};
269
270			partition@4140000 {
271				label = "rootfs";
272				reg = <0x4140000 0x1000000>;
273			};
274
275			partition@5140000 {
276				label = "usrdata";
277				reg = <0x5140000 0x1000000>;
278			};
279		};
280	};
281};
282
283&pcie {
284	pinctrl-names = "default";
285	pinctrl-0 = <&pcie_default>;
286	status = "okay";
287
288	pcie@0,0 {
289		status = "okay";
290	};
291
292	pcie@1,0 {
293		status = "okay";
294	};
295};
296
297&pcie0_phy {
298	status = "okay";
299};
300
301&pcie1_phy {
302	status = "okay";
303};
304
305&pwm {
306	pinctrl-names = "default";
307	pinctrl-0 = <&pwm_pins_a>;
308	status = "okay";
309};
310
311&spi0 {
312	pinctrl-names = "default";
313	pinctrl-0 = <&spi0_pins_a>;
314	status = "okay";
315};
316
317&spi1 {
318	pinctrl-names = "default";
319	pinctrl-0 = <&spi1_pins_a>;
320	status = "okay";
321};
322
323&uart2 {
324	pinctrl-names = "default";
325	pinctrl-0 = <&uart2_pins_b>;
326	status = "okay";
327};
328
329&usb1 {
330	vusb33-supply = <&reg_3p3v>;
331	vbus-supply = <&reg_5v>;
332	status = "okay";
333};
334
335&u3phy1 {
336	status = "okay";
337};