1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
  4 *
  5 * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
 
 
  6 */
  7
  8#include "kirkwood.dtsi"
  9#include "kirkwood-6281.dtsi"
 10
 11/ {
 12	memory {
 13		device_type = "memory";
 14		reg = <0x00000000 0x20000000>;
 15	};
 16
 17	chosen {
 18		bootargs = "console=ttyS0,115200n8 earlyprintk";
 19		stdout-path = &uart0;
 20	};
 21
 22	ocp@f1000000 {
 23		pinctrl: pin-controller@10000 {
 24
 25			pmx_usb_power_enable: pmx-usb-power-enable {
 26				marvell,pins = "mpp29";
 27				marvell,function = "gpio";
 28			};
 29			pmx_led_red: pmx-led-red {
 30				marvell,pins = "mpp46";
 31				marvell,function = "gpio";
 32			};
 33			pmx_led_blue: pmx-led-blue {
 34				marvell,pins = "mpp49";
 35				marvell,function = "gpio";
 36			};
 37			pmx_sdio_cd: pmx-sdio-cd {
 38				marvell,pins = "mpp44";
 39				marvell,function = "gpio";
 40			};
 41			pmx_sdio_wp: pmx-sdio-wp {
 42				marvell,pins = "mpp47";
 43				marvell,function = "gpio";
 44			};
 45		};
 46		serial@12000 {
 47			status = "okay";
 48		};
 49	};
 50
 51	regulators {
 52		compatible = "simple-bus";
 53		#address-cells = <1>;
 54		#size-cells = <0>;
 55		pinctrl-0 = <&pmx_usb_power_enable>;
 56		pinctrl-names = "default";
 57
 58		usb_power: regulator@1 {
 59			compatible = "regulator-fixed";
 60			reg = <1>;
 61			regulator-name = "USB Power";
 62			regulator-min-microvolt = <5000000>;
 63			regulator-max-microvolt = <5000000>;
 64			enable-active-high;
 65			regulator-always-on;
 66			regulator-boot-on;
 67			gpio = <&gpio0 29 0>;
 68		};
 69	};
 70};
 71
 72&nand {
 73	status = "okay";
 74
 75	partition@0 {
 76		label = "u-boot";
 77		reg = <0x0000000 0x100000>;
 78	};
 79
 80	partition@100000 {
 81		label = "uImage";
 82		reg = <0x0100000 0x400000>;
 83	};
 84
 85	partition@500000 {
 86		label = "root";
 87		reg = <0x0500000 0x1fb00000>;
 88	};
 89};
 90
 91&mdio {
 92	status = "okay";
 93
 94	ethphy0: ethernet-phy@0 {
 95		reg = <0>;
 96	};
 97};
 98
 99&eth0 {
100	status = "okay";
101	ethernet0-port@0 {
102		phy-handle = <&ethphy0>;
103	};
104};

 
  1/*
  2 * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
  3 *
  4 * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
  5 *
  6 * Licensed under GPLv2
  7 */
  8
  9#include "kirkwood.dtsi"
 10#include "kirkwood-6281.dtsi"
 11
 12/ {
 13	memory {
 14		device_type = "memory";
 15		reg = <0x00000000 0x20000000>;
 16	};
 17
 18	chosen {
 19		bootargs = "console=ttyS0,115200n8 earlyprintk";
 20		stdout-path = &uart0;
 21	};
 22
 23	ocp@f1000000 {
 24		pinctrl: pin-controller@10000 {
 25
 26			pmx_usb_power_enable: pmx-usb-power-enable {
 27				marvell,pins = "mpp29";
 28				marvell,function = "gpio";
 29			};
 30			pmx_led_red: pmx-led-red {
 31				marvell,pins = "mpp46";
 32				marvell,function = "gpio";
 33			};
 34			pmx_led_blue: pmx-led-blue {
 35				marvell,pins = "mpp49";
 36				marvell,function = "gpio";
 37			};
 38			pmx_sdio_cd: pmx-sdio-cd {
 39				marvell,pins = "mpp44";
 40				marvell,function = "gpio";
 41			};
 42			pmx_sdio_wp: pmx-sdio-wp {
 43				marvell,pins = "mpp47";
 44				marvell,function = "gpio";
 45			};
 46		};
 47		serial@12000 {
 48			status = "okay";
 49		};
 50	};
 51
 52	regulators {
 53		compatible = "simple-bus";
 54		#address-cells = <1>;
 55		#size-cells = <0>;
 56		pinctrl-0 = <&pmx_usb_power_enable>;
 57		pinctrl-names = "default";
 58
 59		usb_power: regulator@1 {
 60			compatible = "regulator-fixed";
 61			reg = <1>;
 62			regulator-name = "USB Power";
 63			regulator-min-microvolt = <5000000>;
 64			regulator-max-microvolt = <5000000>;
 65			enable-active-high;
 66			regulator-always-on;
 67			regulator-boot-on;
 68			gpio = <&gpio0 29 0>;
 69		};
 70	};
 71};
 72
 73&nand {
 74	status = "okay";
 75
 76	partition@0 {
 77		label = "u-boot";
 78		reg = <0x0000000 0x100000>;
 79	};
 80
 81	partition@100000 {
 82		label = "uImage";
 83		reg = <0x0100000 0x400000>;
 84	};
 85
 86	partition@500000 {
 87		label = "root";
 88		reg = <0x0500000 0x1fb00000>;
 89	};
 90};
 91
 92&mdio {
 93	status = "okay";
 94
 95	ethphy0: ethernet-phy@0 {
 96		reg = <0>;
 97	};
 98};
 99
100&eth0 {
101	status = "okay";
102	ethernet0-port@0 {
103		phy-handle = <&ethphy0>;
104	};
105};